ROLLOUT 7 · kinegratii/borax
kinegratii__borax-23
Solved
417 stotal time
9tool calls
11model calls
7,324tokens generated
94,172prompt tokens read
No error recorded
⚠ The request log has 10 model calls but the trace has 12 agent calls, so tokens are listed separately instead of beside each turn.
Turn by turn
Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.
System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`. Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run. ## Critical Environment & Grader Rules 1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`. 2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files. 3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`. 4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks: `pytest path/to/test_file.py -k pattern -q --tb=short --no-header` If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off. 5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission. ## Execution Protocol ### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls) - The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories. - Run a single compound `run_command` with `grep -rn --include="*.py"` to locate: (a) the exact symbols, error strings, or functions from the problem description, (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and (c) the closest existing unit test files under `tests/`. ### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls) - Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests. - Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types. ### Phase 3 — Reproduce Bug in One Call (1 tool call) - Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts. ### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls) - Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`. - Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests. - **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`. ### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls) - Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`. - Run `git status --short && git diff` via `run_command`. Confirm: - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately), - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched), - Minimal, clean diff with valid imports and indentation. - Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 3,273 characters
You are evaluating a software engineering task for repository kinegratii/borax. Problem Statement: 农历日“二十”“三十”中文名称错误 ## 发现版本 v3.4.0 ## 问题描述 “廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。 ## 代码示例 ```python from borax.calendars.lunardate import LunarDate, TextUtils print(TextUtils.day_cn(20)) # “廿十” ld = LunarDate(2020, 10, 20, 0) print(ld.cn_day) # “廿十” print(ld.cn_day_calendar) # “廿十” print(ld.cn_str()) # “廿十” ``` ## 建议方案 只需要修改 `TextUtils.day_cn` 逻辑即可，其他函数均是调用该函数。 ## Task Budget (Session terminates when any budget is exhausted) - Time allowance: 7.5 minutes - Tool calls allowance: 30 calls - Max loop iterations: 40 turns ## Execution Environment Rules - Single command timeout: 90 seconds (commands exceeding this fail without ending the session) - Command output limit: 5000 characters - File view limit: 150 lines per read_file call - File character limit: 10000 characters per read_file call - Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages. ## Instructions: 0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages. 1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules. 2. Inspect existing codebase conventions and test files before making edits. 3. Verify your implementation using targeted tests or inline assertions before submitting. 4. Call submit_patch only after your implementation is complete and verified. 5. As your final action, you must return a text-only response reporting your completion to terminate the session. ## Workspace Layout The repository is located at `/workspace`. Here is the directory tree (up to 3 levels): ``` ./LICENSE ./MANIFEST.in ./README.md ./borax ./borax/__init__.py ./borax/calendars ./borax/calendars/FestivalData.txt ./borax/calendars/__init__.py ./borax/calendars/birthday.py ./borax/calendars/festivals.py ./borax/calendars/lunardate.py ./borax/calendars/store.py ./borax/calendars/utils.py ./borax/choices.py ./borax/constants.py ./borax/counters ./borax/counters/__init__.py ./borax/counters/daily.py ./borax/counters/serial_pool.py ./borax/counters/serials.py ./borax/datasets ./borax/datasets/__init__.py ./borax/datasets/fetch.py ./borax/datasets/join_.py ./borax/devtools.py ./borax/finance.py ./borax/htmls.py ./borax/numbers.py ./borax/patterns ./borax/patterns/__init__.py ./borax/patterns/lazy.py ./borax/patterns/proxy.py ./borax/patterns/singleton.py ./borax/serialize ./borax/serialize/__init__.py ./borax/serialize/bjson.py ./borax/serialize/cjson.py ./borax/strings.py ./borax/structures ./borax/structures/__init__.py ./borax/structures/dictionary.py ./borax/structures/percentage.py ./borax/structures/tree.py ./borax/system.py ./borax/ui ./borax/ui/__init__.py ./borax/ui/aiotk.py ./borax/ui/widgets.py ./borax/utils.py ./docs ./examples ./long_description.rst ./pyproject.toml ./requirements_dev.txt ./setup.cfg ./setup.py ./tests ./tools ./tools/validate_lunar.py ```
Turn 1at 16 s185 tokens out3,114 prompt tokens
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`. Specifically, for days 20 and 30 of the lunar month, the output is "廿十" and "卅十", which are incorrect. They should be "二十" and "三十". The problem statement says: - `TextUtils.day_cn(20)` returns "廿十", should be "二十". - `TextUtils.day_cn(30)` (implied) returns "卅十", should be "三十". Let's locate `borax/calendars/lunardate.py` and the `TextUtils` class.
TOOL CALL · run_command
{
"command": "grep -rn --include=\"*.py\" \"def day_cn\" borax/calendars/"
}Result of run_command 127 characters
{
"status": "ok",
"stdout": "borax/calendars/lunardate.py:352: def day_cn(day: int) -> str:\n",
"stderr": "",
"exit_code": 0
}Turn 2at 25 s84 tokens out3,368 prompt tokens
Okay, the function `day_cn` is in `borax/calendars/lunardate.py` at line 352. Let's read the code around that function.
TOOL CALL · read_file
{
"end_line": 370,
"filepath": "borax/calendars/lunardate.py",
"start_line": 340
}Result of read_file 1,126 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": " ANIMALS = '鼠牛虎兔龙蛇马羊猴鸡狗猪'\n\n @staticmethod\n def year_cn(year: int) -> str:\n s = ''.join([TextUtils.MONTHS_CN[int(c)] for c in str(year)])\n return s.replace('正', '一')\n\n @staticmethod\n def month_cn(month: int) -> str:\n return TextUtils.MONTHS_CN[month]\n\n @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n\n @staticmethod\n def get_gz_cn(offset: int) -> str:\n \"\"\"Get n-th(0-based) GanZhi\n \"\"\"\n return TextUtils.STEMS[offset % 10] + TextUtils.BRANCHES[offset % 12]\n\n\nclass LunarDate(EncoderMixin):\n fields = [f_year, f_month, f_day, f_leap]\n\n def __init__(self, year: int, month: int, day: int, leap: Leap = False):",
"start_line": 340,
"end_line": 370,
"total_lines": 679,
"is_truncated": false
}Turn 3at 31 s81 tokens out3,885 prompt tokens
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand how they are defined. They are probably defined earlier in the `TextUtils` class.
TOOL CALL · read_file
{
"end_line": 350,
"filepath": "borax/calendars/lunardate.py",
"start_line": 300
}Result of read_file 2,003 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": " value_offset = [0, 15]\n year_index = year - 1900\n days = [int(c) + value_offset[i % 2] for i, c in enumerate(TERM_INFO[year_index])]\n return days\n\n @staticmethod\n def get_term_info(year, month, day):\n \"\"\"Parse solar term and stem-branch year/month/day from a solar date.\n (sy, sm, sd) => (term, next_gz_month)\n term for year 2101,:2101.1.5(初六) 小寒 2101.1.20(廿一) 大寒\n \"\"\"\n if year == 2101:\n days = [5, 20]\n else:\n days = TermUtils.parse_term_days(year)\n term_index1 = 2 * (month - 1)\n term_index2 = 2 * (month - 1) + 1\n day1 = days[term_index1]\n day2 = days[term_index2]\n if day == day1:\n term_name = TERMS_CN[term_index1]\n elif day == day2:\n term_name = TERMS_CN[term_index2]\n else:\n term_name = None\n\n next_gz_month = day >= day1\n return term_name, next_gz_month\n\n\n# ------ Stems and Branches ------\n\n\nclass TextUtils:\n MONTHS_CN = '〇正二三四五六七八九十冬腊'\n TENS = '初十廿卅'\n DAYS_CN = '日一二三四五六七八九十'\n\n STEMS = '甲乙丙丁戊己庚辛壬癸'\n BRANCHES = '子丑寅卯辰巳午未申酉戌亥'\n ANIMALS = '鼠牛虎兔龙蛇马羊猴鸡狗猪'\n\n @staticmethod\n def year_cn(year: int) -> str:\n s = ''.join([TextUtils.MONTHS_CN[int(c)] for c in str(year)])\n return s.replace('正', '一')\n\n @staticmethod\n def month_cn(month: int) -> str:\n return TextUtils.MONTHS_CN[month]\n",
"start_line": 300,
"end_line": 350,
"total_lines": 679,
"is_truncated": false
}Turn 4at 248 s4,036 tokens out4,634 prompt tokens
Okay, I see the definitions:
```python
TENS = '初十廿卅'
DAYS_CN = '日一二三四五六七八九十'
```
Wait:
Index 0: 初
Index 1: 十
Index 2: 廿
Index 3: 卅
`day_cn(day)` implementation:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's trace for `day = 20`:
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is False.
`return TextUtils.TENS[2] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[2]` is '廿'
`TextUtils.DAYS_CN[10]` is '十'
Result: '廿十'
For `day = 30`:
`a, b = divmod(30, 10)` -> `a = 3, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is False.
`return TextUtils.TENS[3] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[3]` is '卅'
`TextUtils.DAYS_CN[10]` is '十'
Result: '卅十'
For `day = 10`:
`a, b = divmod(10, 10)` -> `a = 1, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is True:
`a = 0`
`return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[0]` is '初'
`TextUtils.DAYS_CN[10]` is '十'
Result: '初十' (This seems correct for the 10th day of lunar month)
Wait, "廿" means 20, "卅" means 30.
So "廿十" is like saying "twenty-ten", which is wrong.
The user says it should be "二十" and "三十".
Wait, but for 1 to 9, `divmod(day, 10)` gives `a=0, b=day`.
`b == 0` is False.
`TextUtils.TENS[0]` ('初') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 1-9 are '初一' through '初九'. Correct.
For 11-19:
`a=1, b=1-9`.
`b == 0` is False.
`TextUtils.TENS[1]` ('十') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 11-19 are '十一' through '十九'. Correct.
For 21-29:
`a=2, b=1-9`.
`b == 0` is False.
`TextUtils.TENS[2]` ('廿') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 21-29 are '廿一' through '廿九'. Correct.
For 30:
`a=3, b=0`.
`b=10`, `a=3`.
'卅十'. Wrong. Should be '三十'.
Wait, the user said:
`print(TextUtils.day_cn(20)) # “廿十”`
`print(TextUtils.day_cn(30)) # “卅十”` (implied)
For `day = 20`:
`a=2, b=0`.
`b=10`, `a=2`.
`TextUtils.TENS[2] + TextUtils.DAYS_CN[10]` = '廿十'.
It should be '二十'.
Wait, let's check `day = 30` again.
`a=3, b=0`.
`b=10`, `a=3`.
`TextUtils.TENS[3] + TextUtils.DAYS_CN[10]` = '卅十'.
It should be '三十'.
So for 20 and 30, we should use '二' and '三' instead of '廿' and '卅'.
But wait, `TextUtils.TENS` has '初', '十', '廿', '卅'.
`TextUtils.TENS[0]` = '初'
`TextUtils.TENS[1]` = '十'
`TextUtils.TENS[2]` = '廿'
`TextUtils.TENS[3]` = '卅'
If `day=20`, `a=2`. We want '二' + '十'.
If `day=30`, `a=3`. We want '三' + '十'.
Wait, '二' and '三' are in `DAYS_CN`.
`DAYS_CN = '日一二三四五六七八九十'`
`DAYS_CN[2]` = '二'
`DAYS_CN[3]` = '三'
So for 20 and 30, we should not use `TENS[a]`.
Let's look at the current logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day == 20`: `a=2, b=10`. Returns `TENS[2] + DAYS_CN[10]` = '廿十'.
If `day == 30`: `a=3, b=10`. Returns `TENS[3] + DAYS_CN[10]` = '卅十'.
If `day == 10`: `a=0, b=10`. Returns `TENS[0] + DAYS_CN[10]` = '初十'.
Wait, if `day == 20`, we want "二十".
`DAYS_CN[2]` is '二'. `DAYS_CN[10]` is '十'.
So we want `DAYS_CN[2] + DAYS_CN[10]`.
But `TENS` is used for the first part.
If `day == 20`, we want `a` to be handled differently.
Actually, "廿" is specifically for 20-29 (excluding 20).
And "卅" is specifically for 30 (Wait, the lunar month can have up to 30 days).
Wait, if `day=21`, `a=2, b=1`. Result '廿一'. This is standard.
If `day=20`, result '廿十'. This is "twenty-ten".
So for `day` in [20, 30], we should use '二' or '三' as the prefix.
Let's check:
`day = 20`: should be "二十"
`day = 30`: should be "三十"
`day = 10`: should be "初十"
Current logic for 10:
`a=1, b=0` -> `b=10, a=0` -> `TENS[0] + DAYS_CN[10]` = "初十". Correct.
For 20:
`a=2, b=0` -> `b=10, a=2` -> `TENS[2] + DAYS_CN[10]` = "廿十". Incorrect.
For 30:
`a=3, b=0` -> `b=10, a=3` -> `TENS[3] + DAYS_CN[10]` = "卅十". Incorrect.
So if `b == 0` (meaning day is 10, 20, or 30):
- If `a == 1` (day 10), result is "初十".
- If `a == 2` (day 20), result is "二十".
- If `a == 3` (day 30), result is "三十".
Wait, "二十" consists of `DAYS_CN[2]` and `DAYS_CN[10]`.
"三十" consists of `DAYS_CN[3]` and `DAYS_CN[10]`.
Let's see how to modify `day_cn` to achieve this.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a == 2: # 20
# we want '二十'
# TENS[2] is '廿'
# Maybe we can change TENS or handle it here.
pass
```
If `a == 2`, we want `DAYS_CN[2]` ('二') instead of `TENS[2]` ('廿').
If `a == 3`, we want `DAYS_CN[3]` ('三') instead of `TENS[3]` ('卅').
But wait, `TENS[0]` is '初'. We can't just use `DAYS_CN[a]` for `a=0`.
If `b == 10`:
- `a=0` (day 10): `TENS[0]` ('初') + `DAYS_CN[10]` ('十') = '初十'.
- `a=2` (day 20): `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十') = '二十'.
- `a=3` (day 30): `DAYS_CN[3]` ('三') + `DAYS_CN[10]` ('十') = '三十'.
So if `b == 10` and `a > 1`, we should use `DAYS_CN[a]` instead of `TENS[a]`.
Let's verify this.
If `day = 20`: `a=2, b=0` -> `b=10, a=2`.
`b == 10` and `a > 1` is True.
Use `DAYS_CN[2] + DAYS_CN[10]` = "二十".
If `day = 30`: `a=3, b=0` -> `b=10, a=3`.
`b == 10` and `a > 1` is True.
Use `DAYS_CN[3] + DAYS_CN[10]` = "三十".
If `day = 10`: `a=1, b=0` -> `b=10, a=0`.
`b == 10` and `a > 1` is False.
Use `TENS[0] + DAYS_CN[10]` = "初十".
Wait, let's check other cases.
If `day = 1`: `a=0, b=1`. `b` is not 0. Result `TENS[0] + DAYS_CN[1]` = "初一". Correct.
If `day = 11`: `a=1, b=1`. `b` is not 0. Result `TENS[1] + DAYS_CN[1]` = "十一". Correct.
If `day = 21`: `a=2, b=1`. `b` is not 0. Result `TENS[2] + DAYS_CN[1]` = "廿一". Correct.
If `day = 29`: `a=2, b=9`. `b` is not 0. Result `TENS[2] + DAYS_CN[9]` = "廿九". Correct.
So the condition for using `DAYS_CN[a]` instead of `TENS[a]` is precisely when `b == 10` and `a >= 2`.
Wait, let's double check if `a` can be anything else.
`day` is typically 1 to 30.
`divmod(day, 10)`:
`day=1..9` -> `a=0, b=1..9`
`day=10` -> `a=1, b=0` -> `a=0, b=10`
`day=11..19` -> `a=1, b=1..9`
`day=20` -> `a=2, b=0` -> `a=2, b=10`
`day=21..29` -> `a=2, b=1..9`
`day=30` -> `a=3, b=0` -> `a=3, b=10`
So for `day=20` and `day=30`, `b=10` and `a` is 2 or 3.
In these cases, we should use `DAYS_CN[a]`.
Wait, is there a simpler way?
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's check `day=10`: `a=0, b=10`. `b==10 and a>=2` is False. Returns `TENS[0] + DAYS_CN[10]` = "初十". Correct.
Let's check `day=20`: `a=2, b=10`. `b==10 and a>=2` is True. Returns `DAYS_CN[2] + DAYS_CN[10]` = "二十". Correct.
Let's check `day=30`: `a=3, b=10`. `b==10 and a>=2` is True. Returns `DAYS_CN[3] + DAYS_CN[10]` = "三十". Correct.
Wait, let's look at the `TENS` and `DAYS_CN` strings again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
`TENS[0]`='初', `TENS[1]`='十', `TENS[2]`='廿', `TENS[3]`='卅'
`DAYS_CN[0]`='日', `DAYS_CN[1]`='一', `DAYS_CN[2]`='二', `DAYS_CN[3]`='三', ..., `DAYS_CN[10]`='十'
So for `day=20`, `a=2, b=10`. `DAYS_CN[2]` is '二', `DAYS_CN[10]` is '十'. Result '二十'.
For `day=30`, `a=3, b=10`. `DAYS_CN[3]` is '三', `DAYS_CN[10]` is '十'. Result '三十'.
This looks correct.
Let's create a reproduction script to verify.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\nprint(f\"Day 20: {TextUtils.day_cn(20)}\")\nprint(f\"Day 30: {TextUtils.day_cn(30)}\")\nprint(f\"Day 10: {TextUtils.day_cn(10)}\")\n\nld20 = LunarDate(2020, 10, 20, 0)\nprint(f\"LD 20 cn_day: {ld20.cn_day}\")\nprint(f\"LD 20 cn_day_calendar: {ld20.cn_day_calendar}\")\nprint(f\"LD 20 cn_str: {ld20.cn_str()}\")\n\nld30 = LunarDate(2020, 10, 30, 0)\nprint(f\"LD 30 cn_day: {ld30.cn_day}\")\nprint(f\"LD 30 cn_str: {ld30.cn_str()}\")\nPY\n"
}Result of run_command 359 characters
{
"status": "ok",
"stdout": "Day 20: 廿十\nDay 30: 卅十\nDay 10: 初十\nLD 20 cn_day: 廿十\nLD 20 cn_day_calendar: 廿十\nLD 20 cn_str: 二〇二〇年十月廿十\nLD 30 cn_day: 卅十\nLD 30 cn_str: 二〇二〇年十月卅十\n",
"stderr": "",
"exit_code": 0
}Turn 5at 260 s143 tokens out8,816 prompt tokens
The reproduction confirms the bug. Wait, I noticed `ld20.cn_str()` outputted `二〇二〇年十月廿十`. And `ld30.cn_str()` outputted `二〇二〇年十月卅十`. Wait, the `LunarDate.cn_str()` also uses `day_cn` through `cn_day`. Let's verify `LunarDate`'s implementation of `cn_day`.
TOOL CALL · read_file
{
"end_line": 450,
"filepath": "borax/calendars/lunardate.py",
"start_line": 400
}Result of read_file 1,770 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": " def term(self) -> str:\n return self._term\n\n @property\n def gz_year(self) -> str:\n return self._gz_year\n\n @property\n def gz_month(self) -> str:\n return self._gz_month\n\n @property\n def gz_day(self) -> str:\n return self._gz_day\n\n @property\n def animal(self) -> str:\n return TextUtils.ANIMALS[(self.year - 4) % 12]\n\n def _get_gz_ymd(self):\n \"\"\"\n (sy, sm, sd) -> term / gz_year / gz_month / gz_day\n \"\"\"\n solar_date = MIN_SOLAR_DATE + datetime.timedelta(days=self._offset)\n sy, sm, sd = solar_date.year, solar_date.month, solar_date.day\n s_offset = (datetime.date(sy, sm, sd) - MIN_SOLAR_DATE).days\n gz_year = TextUtils.STEMS[(self.year - 4) % 10] + TextUtils.BRANCHES[(self.year - 4) % 12]\n gz_day = TextUtils.get_gz_cn((s_offset + 40) % 60)\n term_name, next_gz_month = TermUtils.get_term_info(sy, sm, sd)\n if next_gz_month:\n gz_month = TextUtils.get_gz_cn((sy - 1900) * 12 + sm + 12)\n else:\n gz_month = TextUtils.get_gz_cn((sy - 1900) * 12 + sm + 11)\n return gz_year, gz_month, gz_day, term_name\n\n @property\n def cn_year(self) -> str:\n return '{}'.format(TextUtils.year_cn(self.year))\n\n @property\n def cn_month(self) -> str:\n return '{}'.format(TextUtils.month_cn(self.month))\n\n @property\n def cn_day(self) -> str:\n return '{}'.format(TextUtils.day_cn(self.day))\n\n @property\n def cn_leap(self) -> str:\n return '闰' if self.leap else ''\n",
"start_line": 400,
"end_line": 450,
"total_lines": 679,
"is_truncated": false
}Turn 6at 317 s1,337 tokens out9,640 prompt tokens
Yes, `cn_day` calls `TextUtils.day_cn(self.day)`.
Now let's implement the fix in `TextUtils.day_cn`.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, can I make it even cleaner?
If `b == 10`, then:
- `a=0` (day 10) -> `TENS[0]` + `DAYS_CN[10]` = "初十"
- `a=2` (day 20) -> `DAYS_CN[2]` + `DAYS_CN[10]` = "二十"
- `a=3` (day 30) -> `DAYS_CN[3]` + `DAYS_CN[10]` = "三十"
Actually, for `b=10`, if `a=0`, we want `TENS[0]`. If `a>0`, we want `DAYS_CN[a]`.
Wait, `TENS[0]` is '初'. `DAYS_CN[0]` is '日'.
So for `b=10`, if `a=0`, we use `TENS[0]`. If `a=2` or `a=3`, we use `DAYS_CN[a]`.
Let's check `a=1` for `b=10`.
Actually, the code currenty does:
```python
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
```
So if `day=10`, `a` becomes 0 and `b` becomes 10.
If `day=20`, `a` stays 2 and `b` becomes 10.
If `day=30`, `a` stays 3 and `b` becomes 10.
So if `b == 10`:
- If `a == 0`, use `TENS[0]` ('初').
- If `a == 2`, use `DAYS_CN[2]` ('二').
- If `a == 3`, use `DAYS_CN[3]` ('三').
Wait, `TENS[1]` is '十'.
If we had `a=1, b=10`, it would be `TENS[1] + DAYS_CN[10]` = "十十".
But `a` is never 1 when `b=10` because of the `if a == 1: a = 0` block.
So, for `b == 10`, we use `TENS[a]` if `a == 0`, otherwise `DAYS_CN[a]`.
Wait, let's just use the simple `if b == 10 and a >= 2` logic. It's explicit and correct.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, let's double check if `TENS[a]` should ever be used when `b=10` and `a>=2`.
`TENS[2]` = '廿', `TENS[3]` = '卅'.
"廿十" and "卅十" are specifically what we want to avoid.
How about other `b` values when `a >= 2`?
`day = 21`: `a=2, b=1`. `b == 10` is False. Returns `TENS[2] + DAYS_CN[1]` = "廿一". Correct.
So the proposed fix is correct.
Let's apply it.
TOOL CALL · edit_file
{
"filepath": "borax/calendars/lunardate.py",
"new_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n if b == 10 and a >= 2:\n return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]",
"old_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]"
}Result of edit_file 482 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"occurrences": 1,
"strategy": "exact",
"diff": "--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -355,6 +355,8 @@\n b = 10\n if a == 1: # 10\n a = 0\n+ if b == 10 and a >= 2:\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"is_truncated": false
}Turn 7at 340 s385 tokens out11,182 prompt tokens
Now let's verify the fix.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\ntest_days = [1, 9, 10, 11, 19, 20, 21, 29, 30]\nexpected = {\n 1: \"初一\", 9: \"初九\", 10: \"初十\", 11: \"十一\", 19: \"十九\", 20: \"二十\", 21: \"廿一\", 29: \"廿九\", 30: \"三十\"\n}\n\nfor d in test_days:\n result = TextUtils.day_cn(d)\n print(f\"Day {d:2}: {result} (Expected: {expected[d]}) - {'OK' if result == expected[d] else 'FAILED'}\")\n\nld20 = LunarDate(2020, 10, 20, 0)\nprint(f\"LD 20 cn_day: {ld20.cn_day} (Expected: 二十)\")\nprint(f\"LD 20 cn_str: {ld20.cn_str()} (Expected to contain 二十)\")\n\nld30 = LunarDate(2020, 10, 30, 0)\nprint(f\"LD 30 cn_day: {ld30.cn_day} (Expected: 三十)\")\nprint(f\"LD 30 cn_str: {ld30.cn_str()} (Expected to contain 三十)\")\nPY\n"
}Result of run_command 844 characters
{
"status": "ok",
"stdout": "Day 1: 初一 (Expected: 初一) - OK\nDay 9: 初九 (Expected: 初九) - OK\nDay 10: 初十 (Expected: 初十) - OK\nDay 11: 十一 (Expected: 十一) - OK\nDay 19: 十九 (Expected: 十九) - OK\nDay 20: 二十 (Expected: 二十) - OK\nDay 21: 廿一 (Expected: 廿一) - OK\nDay 29: 廿九 (Expected: 廿九) - OK\nDay 30: 三十 (Expected: 三十) - OK\nLD 20 cn_day: 二十 (Expected: 二十)\nLD 20 cn_str: 二〇二〇年十月二十 (Expected to contain 二十)\nLD 30 cn_day: 三十 (Expected: 三十)\nLD 30 cn_str: 二〇二〇年十月三十 (Expected to contain 三十)\n",
"stderr": "",
"exit_code": 0
}Turn 8at 344 s66 tokens out11,842 prompt tokens
Everything looks correct. Now I'll check for any other possible locations where this logic might be duplicated. Searching for `day_cn` in the repository.
TOOL CALL · run_command
{
"command": "grep -rn --include=\"*.py\" \"day_cn\" borax/"
}Result of run_command 216 characters
{
"status": "ok",
"stdout": "borax/calendars/lunardate.py:352: def day_cn(day: int) -> str:\nborax/calendars/lunardate.py:447: return '{}'.format(TextUtils.day_cn(self.day))\n",
"stderr": "",
"exit_code": 0
}Turn 9at 374 s355 tokens out12,009 prompt tokens
Only one implementation of `day_cn`, and it's used in `LunarDate.cn_day`.
I have verified it now.
Let's double check the requirements one last time.
The user said:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
Existing values:
# Days 1-9: 初一 to 初九 (OK)
# Day 10: 初十 (OK)
# Days 11-19: 十一 to 十九 (OK)
# Day 20: 二十 (Fixed from 廿十)
# Days 21-29: 廿一 to 廿九 (OK)
# Day 30: 三十 (Fixed from 卅十)
All seem to be in accordance with common Chinese lunar date naming conventions.
One minor detail: `LunarDate` takes `leap` as a keyword argument.
The user's example: `ld = LunarDate(2020, 10, 20, 0)`.
Wait, looking at `LunarDate.__init__`:
```python
def __init__(self, year: int, month: int, day: int, leap: Leap = False):
```
The user passed `0` for `leap`. `0` is falsy, so `leap=False`.
I'll run a final check with `git diff` and then submit.
TOOL CALL · run_command
{
"command": "git status --short && git diff"
}Result of run_command 563 characters
{
"status": "ok",
"stdout": " M borax/calendars/lunardate.py\ndiff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py\nindex b7adda7..a6a79ae 100644\n--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -355,6 +355,8 @@ class TextUtils:\n b = 10\n if a == 1: # 10\n a = 0\n+ if b == 10 and a >= 2:\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"stderr": "",
"exit_code": 0
}Turn 10at 398 s416 tokens out12,614 prompt tokens
The diff looks good and minimal. One final check on `TENS` and `DAYS_CN`. `TENS = '初十廿卅'` `DAYS_CN = '日一二三四五六七八九十'` If `a=2`, `DAYS_CN[2]` is '二'. If `a=3`, `DAYS_CN[3]` is '三'. If `b=10`, `DAYS_CN[10]` is '十'. So `DAYS_CN[a] + DAYS_CN[b]` gives '二十' or '三十'. Correct. Wait, is it possible that `a` could be larger than 3? The lunar month has at most 30 days. `divmod(30, 10)` -> `a=3, b=0` -> `b=10, a=3`. So `a` will be 0, 1, 2, or 3. Wait, if `day=31` (though not possible in lunar calendar), `a=3, b=1` -> `TENS[3] + DAYS_CN[1]` = '卅一'. Correct. Actually, some systems might have 31 days? No, lunar months are 29 or 30 days. If `day=20`, `a=2, b=10`. `a >= 2` is True, returns '二十'. If `day=30`, `a=3, b=10`. `a >= 2` is True, returns '三十'. If `day=10`, `a=0, b=10`. `a >= 2` is False, returns `TENS[0] + DAYS_CN[10]` = '初十'. Everything is consistent.
TOOL CALL · submit_patch
Result of submit_patch 55 characters
{
"status": "ok",
"patch_size": 457,
"files_changed": 1
}Turn 11at 413 s236 tokens out13,068 prompt tokens
The patch has been submitted. Final summary: The bug was that `TextUtils.day_cn` used "廿" and "卅" as prefixes for the 20th and 30th days of the lunar month, resulting in "廿十" and "卅十". The fix ensures that for the 20th and 30th days, the correct Chinese numerals "二" and "三" are used as prefixes, resulting in "二十" and "三十".
Turn 12at 413 s
The bug was caused by `TextUtils.day_cn` incorrectly combining the tens digit a prefix ("廿" for 20, "卅" for 30) with the day "十" for the 20th and 30th days of the lunar month, resulting in "廿十" and "卅十". I modified the logic in `borax/calendars/lunardate.py` to use the standard Arabic-to-Chinese numerals "二" and "三" as prefixes when the day is exactly 20 or 30, ensuring the correct outputs "二十" and "三十".
Model calls (not matched to turns)
Generated tokens 185 tokens · stopped: STOP
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`. Specifically, for days 20 and 30 of the lunar month, the output is "廿十" and "卅十", which are incorrect. They should be "二十" and "三十". The problem statement says: - `TextUtils.day_cn(20)` returns "廿十", should be "二十". - `TextUtils.day_cn(30)` (implied) returns "卅十", should be "三十". Let's locate `borax/calendars/lunardate.py` and the `TextUtils` class.
<|channel>thought
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`.
Specifically, for days 20 and 30 of the lunar month, the output is "廿十" and "卅十", which are incorrect. They should be "二十" and "三十".
The problem statement says:
- `TextUtils.day_cn(20)` returns "廿十", should be "二十".
- `TextUtils.day_cn(30)` (implied) returns "卅十", should be "三十".
Let's locate `borax/calendars/lunardate.py` and the `TextUtils` class.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "def day_cn" borax/calendars/<|"|>}<tool_call|><|tool_response>
Generated tokens 84 tokens · stopped: STOP
Okay, the function `day_cn` is in `borax/calendars/lunardate.py` at line 352. Let's read the code around that function.
Okay, the function `day_cn` is in `borax/calendars/lunardate.py` at line 352.
Let's read the code around that function.<channel|><|tool_call>call:read_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:340,end_line:370}<tool_call|><|tool_response>
Generated tokens 81 tokens · stopped: STOP
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand how they are defined. They are probably defined earlier in the `TextUtils` class.
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand how they are defined.
They are probably defined earlier in the `TextUtils` class.
<channel|><|tool_call>call:read_file{end_line:350,filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:300}<tool_call|><|tool_response>
Generated tokens 4,036 tokens · stopped: STOP
Okay, I see the definitions:
```python
TENS = '初十廿卅'
DAYS_CN = '日一二三四五六七八九十'
```
Wait:
Index 0: 初
Index 1: 十
Index 2: 廿
Index 3: 卅
`day_cn(day)` implementation:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's trace for `day = 20`:
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is False.
`return TextUtils.TENS[2] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[2]` is '廿'
`TextUtils.DAYS_CN[10]` is '十'
Result: '廿十'
For `day = 30`:
`a, b = divmod(30, 10)` -> `a = 3, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is False.
`return TextUtils.TENS[3] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[3]` is '卅'
`TextUtils.DAYS_CN[10]` is '十'
Result: '卅十'
For `day = 10`:
`a, b = divmod(10, 10)` -> `a = 1, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is True:
`a = 0`
`return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[0]` is '初'
`TextUtils.DAYS_CN[10]` is '十'
Result: '初十' (This seems correct for the 10th day of lunar month)
Wait, "廿" means 20, "卅" means 30.
So "廿十" is like saying "twenty-ten", which is wrong.
The user says it should be "二十" and "三十".
Wait, but for 1 to 9, `divmod(day, 10)` gives `a=0, b=day`.
`b == 0` is False.
`TextUtils.TENS[0]` ('初') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 1-9 are '初一' through '初九'. Correct.
For 11-19:
`a=1, b=1-9`.
`b == 0` is False.
`TextUtils.TENS[1]` ('十') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 11-19 are '十一' through '十九'. Correct.
For 21-29:
`a=2, b=1-9`.
`b == 0` is False.
`TextUtils.TENS[2]` ('廿') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 21-29 are '廿一' through '廿九'. Correct.
For 30:
`a=3, b=0`.
`b=10`, `a=3`.
'卅十'. Wrong. Should be '三十'.
Wait, the user said:
`print(TextUtils.day_cn(20)) # “廿十”`
`print(TextUtils.day_cn(30)) # “卅十”` (implied)
For `day = 20`:
`a=2, b=0`.
`b=10`, `a=2`.
`TextUtils.TENS[2] + TextUtils.DAYS_CN[10]` = '廿十'.
It should be '二十'.
Wait, let's check `day = 30` again.
`a=3, b=0`.
`b=10`, `a=3`.
`TextUtils.TENS[3] + TextUtils.DAYS_CN[10]` = '卅十'.
It should be '三十'.
So for 20 and 30, we should use '二' and '三' instead of '廿' and '卅'.
But wait, `TextUtils.TENS` has '初', '十', '廿', '卅'.
`TextUtils.TENS[0]` = '初'
`TextUtils.TENS[1]` = '十'
`TextUtils.TENS[2]` = '廿'
`TextUtils.TENS[3]` = '卅'
If `day=20`, `a=2`. We want '二' + '十'.
If `day=30`, `a=3`. We want '三' + '十'.
Wait, '二' and '三' are in `DAYS_CN`.
`DAYS_CN = '日一二三四五六七八九十'`
`DAYS_CN[2]` = '二'
`DAYS_CN[3]` = '三'
So for 20 and 30, we should not use `TENS[a]`.
Let's look at the current logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day == 20`: `a=2, b=10`. Returns `TENS[2] + DAYS_CN[10]` = '廿十'.
If `day == 30`: `a=3, b=10`. Returns `TENS[3] + DAYS_CN[10]` = '卅十'.
If `day == 10`: `a=0, b=10`. Returns `TENS[0] + DAYS_CN[10]` = '初十'.
Wait, if `day == 20`, we want "二十".
`DAYS_CN[2]` is '二'. `DAYS_CN[10]` is '十'.
So we want `DAYS_CN[2] + DAYS_CN[10]`.
But `TENS` is used for the first part.
If `day == 20`, we want `a` to be handled differently.
Actually, "廿" is specifically for 20-29 (excluding 20).
And "卅" is specifically for 30 (Wait, the lunar month can have up to 30 days).
Wait, if `day=21`, `a=2, b=1`. Result '廿一'. This is standard.
If `day=20`, result '廿十'. This is "twenty-ten".
So for `day` in [20, 30], we should use '二' or '三' as the prefix.
Let's check:
`day = 20`: should be "二十"
`day = 30`: should be "三十"
`day = 10`: should be "初十"
Current logic for 10:
`a=1, b=0` -> `b=10, a=0` -> `TENS[0] + DAYS_CN[10]` = "初十". Correct.
For 20:
`a=2, b=0` -> `b=10, a=2` -> `TENS[2] + DAYS_CN[10]` = "廿十". Incorrect.
For 30:
`a=3, b=0` -> `b=10, a=3` -> `TENS[3] + DAYS_CN[10]` = "卅十". Incorrect.
So if `b == 0` (meaning day is 10, 20, or 30):
- If `a == 1` (day 10), result is "初十".
- If `a == 2` (day 20), result is "二十".
- If `a == 3` (day 30), result is "三十".
Wait, "二十" consists of `DAYS_CN[2]` and `DAYS_CN[10]`.
"三十" consists of `DAYS_CN[3]` and `DAYS_CN[10]`.
Let's see how to modify `day_cn` to achieve this.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a == 2: # 20
# we want '二十'
# TENS[2] is '廿'
# Maybe we can change TENS or handle it here.
pass
```
If `a == 2`, we want `DAYS_CN[2]` ('二') instead of `TENS[2]` ('廿').
If `a == 3`, we want `DAYS_CN[3]` ('三') instead of `TENS[3]` ('卅').
But wait, `TENS[0]` is '初'. We can't just use `DAYS_CN[a]` for `a=0`.
If `b == 10`:
- `a=0` (day 10): `TENS[0]` ('初') + `DAYS_CN[10]` ('十') = '初十'.
- `a=2` (day 20): `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十') = '二十'.
- `a=3` (day 30): `DAYS_CN[3]` ('三') + `DAYS_CN[10]` ('十') = '三十'.
So if `b == 10` and `a > 1`, we should use `DAYS_CN[a]` instead of `TENS[a]`.
Let's verify this.
If `day = 20`: `a=2, b=0` -> `b=10, a=2`.
`b == 10` and `a > 1` is True.
Use `DAYS_CN[2] + DAYS_CN[10]` = "二十".
If `day = 30`: `a=3, b=0` -> `b=10, a=3`.
`b == 10` and `a > 1` is True.
Use `DAYS_CN[3] + DAYS_CN[10]` = "三十".
If `day = 10`: `a=1, b=0` -> `b=10, a=0`.
`b == 10` and `a > 1` is False.
Use `TENS[0] + DAYS_CN[10]` = "初十".
Wait, let's check other cases.
If `day = 1`: `a=0, b=1`. `b` is not 0. Result `TENS[0] + DAYS_CN[1]` = "初一". Correct.
If `day = 11`: `a=1, b=1`. `b` is not 0. Result `TENS[1] + DAYS_CN[1]` = "十一". Correct.
If `day = 21`: `a=2, b=1`. `b` is not 0. Result `TENS[2] + DAYS_CN[1]` = "廿一". Correct.
If `day = 29`: `a=2, b=9`. `b` is not 0. Result `TENS[2] + DAYS_CN[9]` = "廿九". Correct.
So the condition for using `DAYS_CN[a]` instead of `TENS[a]` is precisely when `b == 10` and `a >= 2`.
Wait, let's double check if `a` can be anything else.
`day` is typically 1 to 30.
`divmod(day, 10)`:
`day=1..9` -> `a=0, b=1..9`
`day=10` -> `a=1, b=0` -> `a=0, b=10`
`day=11..19` -> `a=1, b=1..9`
`day=20` -> `a=2, b=0` -> `a=2, b=10`
`day=21..29` -> `a=2, b=1..9`
`day=30` -> `a=3, b=0` -> `a=3, b=10`
So for `day=20` and `day=30`, `b=10` and `a` is 2 or 3.
In these cases, we should use `DAYS_CN[a]`.
Wait, is there a simpler way?
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's check `day=10`: `a=0, b=10`. `b==10 and a>=2` is False. Returns `TENS[0] + DAYS_CN[10]` = "初十". Correct.
Let's check `day=20`: `a=2, b=10`. `b==10 and a>=2` is True. Returns `DAYS_CN[2] + DAYS_CN[10]` = "二十". Correct.
Let's check `day=30`: `a=3, b=10`. `b==10 and a>=2` is True. Returns `DAYS_CN[3] + DAYS_CN[10]` = "三十". Correct.
Wait, let's look at the `TENS` and `DAYS_CN` strings again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
`TENS[0]`='初', `TENS[1]`='十', `TENS[2]`='廿', `TENS[3]`='卅'
`DAYS_CN[0]`='日', `DAYS_CN[1]`='一', `DAYS_CN[2]`='二', `DAYS_CN[3]`='三', ..., `DAYS_CN[10]`='十'
So for `day=20`, `a=2, b=10`. `DAYS_CN[2]` is '二', `DAYS_CN[10]` is '十'. Result '二十'.
For `day=30`, `a=3, b=10`. `DAYS_CN[3]` is '三', `DAYS_CN[10]` is '十'. Result '三十'.
This looks correct.
Let's create a reproduction script to verify.
Okay, I see the definitions:
```python
TENS = '初十廿卅'
DAYS_CN = '日一二三四五六七八九十'
```
Wait:
Index 0: 初
Index 1: 十
Index 2: 廿
Index 3: 卅
`day_cn(day)` implementation:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's trace for `day = 20`:
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is False.
`return TextUtils.TENS[2] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[2]` is '廿'
`TextUtils.DAYS_CN[10]` is '十'
Result: '廿十'
For `day = 30`:
`a, b = divmod(30, 10)` -> `a = 3, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is False.
`return TextUtils.TENS[3] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[3]` is '卅'
`TextUtils.DAYS_CN[10]` is '十'
Result: '卅十'
For `day = 10`:
`a, b = divmod(10, 10)` -> `a = 1, b = 0`
`b == 0` is True:
`b = 10`
`a == 1` is True:
`a = 0`
`return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[0]` is '初'
`TextUtils.DAYS_CN[10]` is '十'
Result: '初十' (This seems correct for the 10th day of lunar month)
Wait, "廿" means 20, "卅" means 30.
So "廿十" is like saying "twenty-ten", which is wrong.
The user says it should be "二十" and "三十".
Wait, but for 1 to 9, `divmod(day, 10)` gives `a=0, b=day`.
`b == 0` is False.
`TextUtils.TENS[0]` ('初') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 1-9 are '初一' through '初九'. Correct.
For 11-19:
`a=1, b=1-9`.
`b == 0` is False.
`TextUtils.TENS[1]` ('十') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 11-19 are '十一' through '十九'. Correct.
For 21-29:
`a=2, b=1-9`.
`b == 0` is False.
`TextUtils.TENS[2]` ('廿') + `TextUtils.DAYS_CN[b]` ('一' to '九').
So 21-29 are '廿一' through '廿九'. Correct.
For 30:
`a=3, b=0`.
`b=10`, `a=3`.
'卅十'. Wrong. Should be '三十'.
Wait, the user said:
`print(TextUtils.day_cn(20)) # “廿十”`
`print(TextUtils.day_cn(30)) # “卅十”` (implied)
For `day = 20`:
`a=2, b=0`.
`b=10`, `a=2`.
`TextUtils.TENS[2] + TextUtils.DAYS_CN[10]` = '廿十'.
It should be '二十'.
Wait, let's check `day = 30` again.
`a=3, b=0`.
`b=10`, `a=3`.
`TextUtils.TENS[3] + TextUtils.DAYS_CN[10]` = '卅十'.
It should be '三十'.
So for 20 and 30, we should use '二' and '三' instead of '廿' and '卅'.
But wait, `TextUtils.TENS` has '初', '十', '廿', '卅'.
`TextUtils.TENS[0]` = '初'
`TextUtils.TENS[1]` = '十'
`TextUtils.TENS[2]` = '廿'
`TextUtils.TENS[3]` = '卅'
If `day=20`, `a=2`. We want '二' + '十'.
If `day=30`, `a=3`. We want '三' + '十'.
Wait, '二' and '三' are in `DAYS_CN`.
`DAYS_CN = '日一二三四五六七八九十'`
`DAYS_CN[2]` = '二'
`DAYS_CN[3]` = '三'
So for 20 and 30, we should not use `TENS[a]`.
Let's look at the current logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day == 20`: `a=2, b=10`. Returns `TENS[2] + DAYS_CN[10]` = '廿十'.
If `day == 30`: `a=3, b=10`. Returns `TENS[3] + DAYS_CN[10]` = '卅十'.
If `day == 10`: `a=0, b=10`. Returns `TENS[0] + DAYS_CN[10]` = '初十'.
Wait, if `day == 20`, we want "二十".
`DAYS_CN[2]` is '二'. `DAYS_CN[10]` is '十'.
So we want `DAYS_CN[2] + DAYS_CN[10]`.
But `TENS` is used for the first part.
If `day == 20`, we want `a` to be handled differently.
Actually, "廿" is specifically for 20-29 (excluding 20).
And "卅" is specifically for 30 (Wait, the lunar month can have up to 30 days).
Wait, if `day=21`, `a=2, b=1`. Result '廿一'. This is standard.
If `day=20`, result '廿十'. This is "twenty-ten".
So for `day` in [20, 30], we should use '二' or '三' as the prefix.
Let's check:
`day = 20`: should be "二十"
`day = 30`: should be "三十"
`day = 10`: should be "初十"
Current logic for 10:
`a=1, b=0` -> `b=10, a=0` -> `TENS[0] + DAYS_CN[10]` = "初十". Correct.
For 20:
`a=2, b=0` -> `b=10, a=2` -> `TENS[2] + DAYS_CN[10]` = "廿十". Incorrect.
For 30:
`a=3, b=0` -> `b=10, a=3` -> `TENS[3] + DAYS_CN[10]` = "卅十". Incorrect.
So if `b == 0` (meaning day is 10, 20, or 30):
- If `a == 1` (day 10), result is "初十".
- If `a == 2` (day 20), result is "二十".
- If `a == 3` (day 30), result is "三十".
Wait, "二十" consists of `DAYS_CN[2]` and `DAYS_CN[10]`.
"三十" consists of `DAYS_CN[3]` and `DAYS_CN[10]`.
Let's see how to modify `day_cn` to achieve this.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a == 2: # 20
# we want '二十'
# TENS[2] is '廿'
# Maybe we can change TENS or handle it here.
pass
```
If `a == 2`, we want `DAYS_CN[2]` ('二') instead of `TENS[2]` ('廿').
If `a == 3`, we want `DAYS_CN[3]` ('三') instead of `TENS[3]` ('卅').
But wait, `TENS[0]` is '初'. We can't just use `DAYS_CN[a]` for `a=0`.
If `b == 10`:
- `a=0` (day 10): `TENS[0]` ('初') + `DAYS_CN[10]` ('十') = '初十'.
- `a=2` (day 20): `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十') = '二十'.
- `a=3` (day 30): `DAYS_CN[3]` ('三') + `DAYS_CN[10]` ('十') = '三十'.
So if `b == 10` and `a > 1`, we should use `DAYS_CN[a]` instead of `TENS[a]`.
Let's verify this.
If `day = 20`: `a=2, b=0` -> `b=10, a=2`.
`b == 10` and `a > 1` is True.
Use `DAYS_CN[2] + DAYS_CN[10]` = "二十".
If `day = 30`: `a=3, b=0` -> `b=10, a=3`.
`b == 10` and `a > 1` is True.
Use `DAYS_CN[3] + DAYS_CN[10]` = "三十".
If `day = 10`: `a=1, b=0` -> `b=10, a=0`.
`b == 10` and `a > 1` is False.
Use `TENS[0] + DAYS_CN[10]` = "初十".
Wait, let's check other cases.
If `day = 1`: `a=0, b=1`. `b` is not 0. Result `TENS[0] + DAYS_CN[1]` = "初一". Correct.
If `day = 11`: `a=1, b=1`. `b` is not 0. Result `TENS[1] + DAYS_CN[1]` = "十一". Correct.
If `day = 21`: `a=2, b=1`. `b` is not 0. Result `TENS[2] + DAYS_CN[1]` = "廿一". Correct.
If `day = 29`: `a=2, b=9`. `b` is not 0. Result `TENS[2] + DAYS_CN[9]` = "廿九". Correct.
So the condition for using `DAYS_CN[a]` instead of `TENS[a]` is precisely when `b == 10` and `a >= 2`.
Wait, let's double check if `a` can be anything else.
`day` is typically 1 to 30.
`divmod(day, 10)`:
`day=1..9` -> `a=0, b=1..9`
`day=10` -> `a=1, b=0` -> `a=0, b=10`
`day=11..19` -> `a=1, b=1..9`
`day=20` -> `a=2, b=0` -> `a=2, b=10`
`day=21..29` -> `a=2, b=1..9`
`day=30` -> `a=3, b=0` -> `a=3, b=10`
So for `day=20` and `day=30`, `b=10` and `a` is 2 or 3.
In these cases, we should use `DAYS_CN[a]`.
Wait, is there a simpler way?
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's check `day=10`: `a=0, b=10`. `b==10 and a>=2` is False. Returns `TENS[0] + DAYS_CN[10]` = "初十". Correct.
Let's check `day=20`: `a=2, b=10`. `b==10 and a>=2` is True. Returns `DAYS_CN[2] + DAYS_CN[10]` = "二十". Correct.
Let's check `day=30`: `a=3, b=10`. `b==10 and a>=2` is True. Returns `DAYS_CN[3] + DAYS_CN[10]` = "三十". Correct.
Wait, let's look at the `TENS` and `DAYS_CN` strings again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
`TENS[0]`='初', `TENS[1]`='十', `TENS[2]`='廿', `TENS[3]`='卅'
`DAYS_CN[0]`='日', `DAYS_CN[1]`='一', `DAYS_CN[2]`='二', `DAYS_CN[3]`='三', ..., `DAYS_CN[10]`='十'
So for `day=20`, `a=2, b=10`. `DAYS_CN[2]` is '二', `DAYS_CN[10]` is '十'. Result '二十'.
For `day=30`, `a=3, b=10`. `DAYS_CN[3]` is '三', `DAYS_CN[10]` is '十'. Result '三十'.
This looks correct.
Let's create a reproduction script to verify.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
print(f"Day 20: {TextUtils.day_cn(20)}")
print(f"Day 30: {TextUtils.day_cn(30)}")
print(f"Day 10: {TextUtils.day_cn(10)}")
ld20 = LunarDate(2020, 10, 20, 0)
print(f"LD 20 cn_day: {ld20.cn_day}")
print(f"LD 20 cn_day_calendar: {ld20.cn_day_calendar}")
print(f"LD 20 cn_str: {ld20.cn_str()}")
ld30 = LunarDate(2020, 10, 30, 0)
print(f"LD 30 cn_day: {ld30.cn_day}")
print(f"LD 30 cn_str: {ld30.cn_str()}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 143 tokens · stopped: STOP
The reproduction confirms the bug. Wait, I noticed `ld20.cn_str()` outputted `二〇二〇年十月廿十`. And `ld30.cn_str()` outputted `二〇二〇年十月卅十`. Wait, the `LunarDate.cn_str()` also uses `day_cn` through `cn_day`. Let's verify `LunarDate`'s implementation of `cn_day`.
The reproduction confirms the bug.
Wait, I noticed `ld20.cn_str()` outputted `二〇二〇年十月廿十`.
And `ld30.cn_str()` outputted `二〇二〇年十月卅十`.
Wait, the `LunarDate.cn_str()` also uses `day_cn` through `cn_day`.
Let's verify `LunarDate`'s implementation of `cn_day`.
<channel|><|tool_call>call:read_file{end_line:450,filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:400}<tool_call|><|tool_response>
Generated tokens 1,337 tokens · stopped: STOP
Yes, `cn_day` calls `TextUtils.day_cn(self.day)`.
Now let's implement the fix in `TextUtils.day_cn`.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, can I make it even cleaner?
If `b == 10`, then:
- `a=0` (day 10) -> `TENS[0]` + `DAYS_CN[10]` = "初十"
- `a=2` (day 20) -> `DAYS_CN[2]` + `DAYS_CN[10]` = "二十"
- `a=3` (day 30) -> `DAYS_CN[3]` + `DAYS_CN[10]` = "三十"
Actually, for `b=10`, if `a=0`, we want `TENS[0]`. If `a>0`, we want `DAYS_CN[a]`.
Wait, `TENS[0]` is '初'. `DAYS_CN[0]` is '日'.
So for `b=10`, if `a=0`, we use `TENS[0]`. If `a=2` or `a=3`, we use `DAYS_CN[a]`.
Let's check `a=1` for `b=10`.
Actually, the code currenty does:
```python
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
```
So if `day=10`, `a` becomes 0 and `b` becomes 10.
If `day=20`, `a` stays 2 and `b` becomes 10.
If `day=30`, `a` stays 3 and `b` becomes 10.
So if `b == 10`:
- If `a == 0`, use `TENS[0]` ('初').
- If `a == 2`, use `DAYS_CN[2]` ('二').
- If `a == 3`, use `DAYS_CN[3]` ('三').
Wait, `TENS[1]` is '十'.
If we had `a=1, b=10`, it would be `TENS[1] + DAYS_CN[10]` = "十十".
But `a` is never 1 when `b=10` because of the `if a == 1: a = 0` block.
So, for `b == 10`, we use `TENS[a]` if `a == 0`, otherwise `DAYS_CN[a]`.
Wait, let's just use the simple `if b == 10 and a >= 2` logic. It's explicit and correct.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, let's double check if `TENS[a]` should ever be used when `b=10` and `a>=2`.
`TENS[2]` = '廿', `TENS[3]` = '卅'.
"廿十" and "卅十" are specifically what we want to avoid.
How about other `b` values when `a >= 2`?
`day = 21`: `a=2, b=1`. `b == 10` is False. Returns `TENS[2] + DAYS_CN[1]` = "廿一". Correct.
So the proposed fix is correct.
Let's apply it.
Yes, `cn_day` calls `TextUtils.day_cn(self.day)`.
Now let's implement the fix in `TextUtils.day_cn`.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, can I make it even cleaner?
If `b == 10`, then:
- `a=0` (day 10) -> `TENS[0]` + `DAYS_CN[10]` = "初十"
- `a=2` (day 20) -> `DAYS_CN[2]` + `DAYS_CN[10]` = "二十"
- `a=3` (day 30) -> `DAYS_CN[3]` + `DAYS_CN[10]` = "三十"
Actually, for `b=10`, if `a=0`, we want `TENS[0]`. If `a>0`, we want `DAYS_CN[a]`.
Wait, `TENS[0]` is '初'. `DAYS_CN[0]` is '日'.
So for `b=10`, if `a=0`, we use `TENS[0]`. If `a=2` or `a=3`, we use `DAYS_CN[a]`.
Let's check `a=1` for `b=10`.
Actually, the code currenty does:
```python
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
```
So if `day=10`, `a` becomes 0 and `b` becomes 10.
If `day=20`, `a` stays 2 and `b` becomes 10.
If `day=30`, `a` stays 3 and `b` becomes 10.
So if `b == 10`:
- If `a == 0`, use `TENS[0]` ('初').
- If `a == 2`, use `DAYS_CN[2]` ('二').
- If `a == 3`, use `DAYS_CN[3]` ('三').
Wait, `TENS[1]` is '十'.
If we had `a=1, b=10`, it would be `TENS[1] + DAYS_CN[10]` = "十十".
But `a` is never 1 when `b=10` because of the `if a == 1: a = 0` block.
So, for `b == 10`, we use `TENS[a]` if `a == 0`, otherwise `DAYS_CN[a]`.
Wait, let's just use the simple `if b == 10 and a >= 2` logic. It's explicit and correct.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, let's double check if `TENS[a]` should ever be used when `b=10` and `a>=2`.
`TENS[2]` = '廿', `TENS[3]` = '卅'.
"廿十" and "卅十" are specifically what we want to avoid.
How about other `b` values when `a >= 2`?
`day = 21`: `a=2, b=1`. `b == 10` is False. Returns `TENS[2] + DAYS_CN[1]` = "廿一". Correct.
So the proposed fix is correct.
Let's apply it.
<channel|><|tool_call>call:edit_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,new_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
if b == 10 and a >= 2:
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]<|"|>,old_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]<|"|>}<tool_call|><|tool_response>
Generated tokens 385 tokens · stopped: STOP
Now let's verify the fix.
Now let's verify the fix.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
test_days = [1, 9, 10, 11, 19, 20, 21, 29, 30]
expected = {
1: "初一", 9: "初九", 10: "初十", 11: "十一", 19: "十九", 20: "二十", 21: "廿一", 29: "廿九", 30: "三十"
}
for d in test_days:
result = TextUtils.day_cn(d)
print(f"Day {d:2}: {result} (Expected: {expected[d]}) - {'OK' if result == expected[d] else 'FAILED'}")
ld20 = LunarDate(2020, 10, 20, 0)
print(f"LD 20 cn_day: {ld20.cn_day} (Expected: 二十)")
print(f"LD 20 cn_str: {ld20.cn_str()} (Expected to contain 二十)")
ld30 = LunarDate(2020, 10, 30, 0)
print(f"LD 30 cn_day: {ld30.cn_day} (Expected: 三十)")
print(f"LD 30 cn_str: {ld30.cn_str()} (Expected to contain 三十)")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 66 tokens · stopped: STOP
Everything looks correct. Now I'll check for any other possible locations where this logic might be duplicated. Searching for `day_cn` in the repository.
Everything looks correct. Now I'll check for any other possible locations where this logic might be duplicated.
Searching for `day_cn` in the repository.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "day_cn" borax/<|"|>}<tool_call|><|tool_response>
Generated tokens 355 tokens · stopped: STOP
Only one implementation of `day_cn`, and it's used in `LunarDate.cn_day`.
I have verified it now.
Let's double check the requirements one last time.
The user said:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
Existing values:
# Days 1-9: 初一 to 初九 (OK)
# Day 10: 初十 (OK)
# Days 11-19: 十一 to 十九 (OK)
# Day 20: 二十 (Fixed from 廿十)
# Days 21-29: 廿一 to 廿九 (OK)
# Day 30: 三十 (Fixed from 卅十)
All seem to be in accordance with common Chinese lunar date naming conventions.
One minor detail: `LunarDate` takes `leap` as a keyword argument.
The user's example: `ld = LunarDate(2020, 10, 20, 0)`.
Wait, looking at `LunarDate.__init__`:
```python
def __init__(self, year: int, month: int, day: int, leap: Leap = False):
```
The user passed `0` for `leap`. `0` is falsy, so `leap=False`.
I'll run a final check with `git diff` and then submit.
Only one implementation of `day_cn`, and it's used in `LunarDate.cn_day`.
I have verified it now.
Let's double check the requirements one last time.
The user said:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
Existing values:
# Days 1-9: 初一 to 初九 (OK)
# Day 10: 初十 (OK)
# Days 11-19: 十一 to 十九 (OK)
# Day 20: 二十 (Fixed from 廿十)
# Days 21-29: 廿一 to 廿九 (OK)
# Day 30: 三十 (Fixed from 卅十)
All seem to be in accordance with common Chinese lunar date naming conventions.
One minor detail: `LunarDate` takes `leap` as a keyword argument.
The user's example: `ld = LunarDate(2020, 10, 20, 0)`.
Wait, looking at `LunarDate.__init__`:
```python
def __init__(self, year: int, month: int, day: int, leap: Leap = False):
```
The user passed `0` for `leap`. `0` is falsy, so `leap=False`.
I'll run a final check with `git diff` and then submit.
<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 416 tokens · stopped: STOP
The diff looks good and minimal. One final check on `TENS` and `DAYS_CN`. `TENS = '初十廿卅'` `DAYS_CN = '日一二三四五六七八九十'` If `a=2`, `DAYS_CN[2]` is '二'. If `a=3`, `DAYS_CN[3]` is '三'. If `b=10`, `DAYS_CN[10]` is '十'. So `DAYS_CN[a] + DAYS_CN[b]` gives '二十' or '三十'. Correct. Wait, is it possible that `a` could be larger than 3? The lunar month has at most 30 days. `divmod(30, 10)` -> `a=3, b=0` -> `b=10, a=3`. So `a` will be 0, 1, 2, or 3. Wait, if `day=31` (though not possible in lunar calendar), `a=3, b=1` -> `TENS[3] + DAYS_CN[1]` = '卅一'. Correct. Actually, some systems might have 31 days? No, lunar months are 29 or 30 days. If `day=20`, `a=2, b=10`. `a >= 2` is True, returns '二十'. If `day=30`, `a=3, b=10`. `a >= 2` is True, returns '三十'. If `day=10`, `a=0, b=10`. `a >= 2` is False, returns `TENS[0] + DAYS_CN[10]` = '初十'. Everything is consistent.
The diff looks good and minimal.
One final check on `TENS` and `DAYS_CN`.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
If `a=2`, `DAYS_CN[2]` is '二'.
If `a=3`, `DAYS_CN[3]` is '三'.
If `b=10`, `DAYS_CN[10]` is '十'.
So `DAYS_CN[a] + DAYS_CN[b]` gives '二十' or '三十'. Correct.
Wait, is it possible that `a` could be larger than 3?
The lunar month has at most 30 days.
`divmod(30, 10)` -> `a=3, b=0` -> `b=10, a=3`.
So `a` will be 0, 1, 2, or 3.
Wait, if `day=31` (though not possible in lunar calendar), `a=3, b=1` -> `TENS[3] + DAYS_CN[1]` = '卅一'. Correct.
Actually, some systems might have 31 days? No, lunar months are 29 or 30 days.
If `day=20`, `a=2, b=10`. `a >= 2` is True, returns '二十'.
If `day=30`, `a=3, b=10`. `a >= 2` is True, returns '三十'.
If `day=10`, `a=0, b=10`. `a >= 2` is False, returns `TENS[0] + DAYS_CN[10]` = '初十'.
Everything is consistent.
<channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>
Patch, tests and logs
Final code change Included
diff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py
index b7adda7..a6a79ae 100644
--- a/borax/calendars/lunardate.py
+++ b/borax/calendars/lunardate.py
@@ -355,6 +355,8 @@ class TextUtils:
b = 10
if a == 1: # 10
a = 0
+ if b == 10 and a >= 2:
+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
@staticmethod
Test output Included
============================= test session starts ============================== collected 128 items tests/test_birthday.py ... [ 2%] tests/test_calendars.py .. [ 3%] tests/test_chinese_number.py .... [ 7%] tests/test_choices.py ............. [ 17%] tests/test_daily_counter.py ... [ 19%] tests/test_dictionary.py . [ 20%] tests/test_fetch.py ...... [ 25%] tests/test_finance.py ... [ 27%] tests/test_htmls.py . [ 28%] tests/test_join.py ..... [ 32%] tests/test_json.py .... [ 35%] tests/test_lazy.py ... [ 37%] tests/test_lunar_benchmark.py . [ 38%] tests/test_lunar_sqlite3_feature.py . [ 39%] tests/test_lunardate.py ................. [ 52%] tests/test_mixed.py ........... [ 60%] tests/test_new_join.py ............ [ 70%] tests/test_percentage.py ... [ 72%] tests/test_proxy.py . [ 73%] tests/test_runtime_measurer.py ... [ 75%] tests/test_serial_generattor.py ...... [ 80%] tests/test_serial_pool.py .......... [ 88%] tests/test_singleton.py . [ 89%] tests/test_string_convert.py .... [ 92%] tests/test_tree_fetcher.py ... [ 94%] tests/test_utils.py ....... [100%] ==================================== PASSES ==================================== - generated xml file: /tmp/rebench-grade-f7fa1ea92a7646618d321bd862d3f9a0.xml -- =========================== short test summary info ============================ PASSED tests/test_birthday.py::NominalAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::ActualAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::MixedAgeTestCase::test_mixed PASSED tests/test_calendars.py::LastDayTestCase::test_fist_day_of_week PASSED tests/test_calendars.py::LastDayTestCase::test_last_day PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_lower_order PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_measure PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_order PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_display PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_value PASSED tests/test_choices.py::FieldChoiceTestCase::test_is_valid PASSED tests/test_choices.py::ChoicesItemTestCase::test_choices PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_display PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_names_and_values_and_labels PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_value PASSED tests/test_choices.py::ChoicesItemTestCase::test_is_valid PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_display PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_value PASSED tests/test_choices.py::OffsetChoicesTestCase::test_is_valid PASSED tests/test_choices.py::DirectionChoicesTestCase::test_child_class PASSED tests/test_choices.py::DirectionChoicesTestCase::test_item_overwrite PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_increase PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance_with_invalid_raw PASSED tests/test_dictionary.py::AttributeDictTestCase::test_access PASSED tests/test_fetch.py::FetchTestCase::test_fetch PASSED tests/test_fetch.py::FetchTestCase::test_fetch_single PASSED tests/test_fetch.py::FetchTestCase::test_ifetch_multiple PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_custom_getter PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_with_dict PASSED tests/test_fetch.py::FetchAsDictTestCase::test_fetch_as_dict PASSED tests/test_finance.py::CapitalNumber::test_amount_capital PASSED tests/test_finance.py::CapitalNumber::test_decimal PASSED tests/test_finance.py::CapitalNumber::test_valid_range PASSED tests/test_htmls.py::HtmlTagTest::test_html_tags PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_join.py::JoinTestCase::test_as_kwargs PASSED tests/test_json.py::CJsonTestCase::test_custom_encoder PASSED tests/test_json.py::CJsonTestCase::test_dumps PASSED tests/test_json.py::CJsonTestCase::test_mixed_encoder PASSED tests/test_json.py::CJsonTestCase::test_singledispatch PASSED tests/test_lazy.py::LazyObjectTestCase::test_delete_attr PASSED tests/test_lazy.py::LazyObjectTestCase::test_lazy_object PASSED tests/test_lazy.py::LazyObjectTestCase::test_with_kwargs PASSED tests/test_lunar_benchmark.py::BenchmarkTestCase::test_edge_dates PASSED tests/test_lunar_sqlite3_feature.py::Sqlite3CustomFieldTestCase::test_custom_field PASSED tests/test_lunardate.py::TextUtilsTestCase::test_cn_day_text PASSED tests/test_lunardate.py::LunarDateTestCase::test_comparison PASSED tests/test_lunardate.py::LunarDateTestCase::test_convert_datetime PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_specific_dates PASSED tests/test_lunardate.py::LunarDateTestCase::test_immutable_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_new_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_solar_and_lunar PASSED tests/test_lunardate.py::LunarDateTestCase::test_term_ganzhi_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_timedelta PASSED tests/test_lunardate.py::PrivateMethodsTestCase::test_year_info PASSED tests/test_lunardate.py::FormatterTestCase::test_cn_calendar_day PASSED tests/test_lunardate.py::FormatterTestCase::test_term PASSED tests/test_lunardate.py::FormatterTestCase::test_valid_format PASSED tests/test_lunardate.py::LCalendarTestCase::test_delta PASSED tests/test_lunardate.py::LCalendarTestCase::test_leap_check PASSED tests/test_lunardate.py::LCalendarTestCase::test_ndays PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_lunar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_solar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_term PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_week PASSED tests/test_mixed.py::MixedDateTestCase::test_match PASSED tests/test_mixed.py::FuzzyTestCaseTest::test_fuzzy_feature PASSED tests/test_mixed.py::ReverseTestCase::test_solar_february PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_leap_countdown PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_match PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_encode PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_schema_factory PASSED tests/test_new_join.py::OnClauseTestCase::test_build PASSED tests/test_new_join.py::OnClauseTestCase::test_type_hints PASSED tests/test_new_join.py::SelectClauseTestCase::test_build PASSED tests/test_new_join.py::SelectClauseTestCase::test_type_hints PASSED tests/test_new_join.py::JoinOneTestCase::test_callback PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_new_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_new_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_new_join.py::JoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinOneTestCase::test_with_dict PASSED tests/test_percentage.py::PercentTestCase::test_basic_use PASSED tests/test_percentage.py::PercentTestCase::test_custom_places PASSED tests/test_percentage.py::PercentTestCase::test_zero_total PASSED tests/test_proxy.py::ProxyTestCase::test_proxy PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_multiple_tags PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_one_hit PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_with PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_func PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_serial_generator PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_error_base PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_hex_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_string_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_upper_edge_value PASSED tests/test_serial_pool.py::SerialValueGeneratorTestCase::test_value_generator PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_basic PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_hex_value PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_invalid_opts PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_basic_generate PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_custom_label_fmt PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_data_manage PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_elements_source PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_error_create PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_success_create PASSED tests/test_singleton.py::test_singleton PASSED tests/test_string_convert.py::StringConvertTestCase::test_all PASSED tests/test_string_convert.py::PercentageStringTestCase::test_convert PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_rotate PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_with_one_datetime PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_forward_reference PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_parse_extra PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_pll2cnl PASSED tests/test_utils.py::BaseTestCase::test_chain PASSED tests/test_utils.py::BaseTestCase::test_force_iterable PASSED tests/test_utils.py::BaseTestCase::test_item_cycle PASSED tests/test_utils.py::BaseTestCase::test_item_cycle2 PASSED tests/test_utils.py::StringTrimTestCase::test_trim_list PASSED tests/test_utils.py::FirstofTestCase::test_first_of PASSED tests/test_utils.py::ForceListTestCase::test_force_list ============================= 128 passed in 0.23s ==============================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites name="pytest tests"><testsuite name="pytest" errors="0" failures="0" skipped="0" tests="139" time="0.225" timestamp="2026-11-14T03:51:19.807739+00:00" hostname="d7dfe304e1bd"><testcase classname="tests.test_birthday.NominalAgeTestCase" name="test_nominal_age" time="0.001" /><testcase classname="tests.test_birthday.ActualAgeTestCase" name="test_nominal_age" time="0.000" /><testcase classname="tests.test_birthday.MixedAgeTestCase" name="test_mixed" time="0.000" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_fist_day_of_week" time="0.003" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_last_day" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number" time="0.001" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_lower_order" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_measure" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_order" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_choices" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_names_and_values_and_labels" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_child_class" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_item_overwrite" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_increase" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance_with_invalid_raw" time="0.000" /><testcase classname="tests.test_dictionary.AttributeDictTestCase" name="test_access" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch_single" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_ifetch_multiple" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_custom_getter" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_fetch.FetchAsDictTestCase" name="test_fetch_as_dict" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_amount_capital" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_decimal" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_valid_range" time="0.000" /><testcase classname="tests.test_htmls.HtmlTagTest" name="test_html_tags" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_join.JoinTestCase" name="test_as_kwargs" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_custom_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_dumps" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_mixed_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_singledispatch" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_delete_attr" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_lazy_object" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_with_kwargs" time="0.000" /><testcase classname="tests.test_lunar_benchmark.BenchmarkTestCase" name="test_edge_dates" time="0.000" /><testcase classname="tests.test_lunar_sqlite3_feature.Sqlite3CustomFieldTestCase" name="test_custom_field" time="0.001" /><testcase classname="tests.test_lunardate.TextUtilsTestCase" name="test_cn_day_text" time="0.001" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_comparison" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_convert_datetime" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_specific_dates" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_immutable_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_new_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_solar_and_lunar" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_term_ganzhi_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_timedelta" time="0.000" /><testcase classname="tests.test_lunardate.PrivateMethodsTestCase" name="test_year_info" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_cn_calendar_day" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_term" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_valid_format" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_delta" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_leap_check" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_ndays" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_lunar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_solar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_term" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_week" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.FuzzyTestCaseTest" name="test_fuzzy_feature" time="0.000" /><testcase classname="tests.test_mixed.ReverseTestCase" name="test_solar_february" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_leap_countdown" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_encode" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_schema_factory" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_callback" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_new_join.JoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_basic_use" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_custom_places" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_zero_total" time="0.000" /><testcase classname="tests.test_proxy.ProxyTestCase" name="test_proxy" time="0.000" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_multiple_tags" time="0.002" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_one_hit" time="0.001" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_with" time="0.001" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_func" time="0.000" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_serial_generator" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_error_base" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_hex_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_string_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_upper_edge_value" time="0.000" /><testcase classname="tests.test_serial_pool.SerialValueGeneratorTestCase" name="test_value_generator" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_basic" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_hex_value" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_invalid_opts" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_basic_generate" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_custom_label_fmt" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_data_manage" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_elements_source" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_error_create" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_success_create" time="0.000" /><testcase classname="tests.test_singleton" name="test_singleton" time="0.000" /><testcase classname="tests.test_string_convert.StringConvertTestCase" name="test_all" time="0.001" /><testcase classname="tests.test_string_convert.PercentageStringTestCase" name="test_convert" time="0.000" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_rotate" time="0.001" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_with_one_datetime" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_forward_reference" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_parse_extra" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_pll2cnl" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_chain" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_force_iterable" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle2" time="0.001" /><testcase classname="tests.test_utils.StringTrimTestCase" name="test_trim_list" time="0.000" /><testcase classname="tests.test_utils.FirstofTestCase" name="test_first_of" time="0.000" /><testcase classname="tests.test_utils.ForceListTestCase" name="test_force_list" time="0.000" /></testsuite></testsuites>
Agent log Included
[ 0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
[ 0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository kinegratii/borax.
[ 15.5s] 💭 (430 chars) "The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`.
Specifically, for days 20 and 30 of the lun..."
[ 15.5s] 🔧 run_command grep -rn --include="*.py" "def day_cn" borax/calendars/
[ 15.5s] → borax/calendars/lunardate.py:352: def day_cn(day: int) -> str:
[ 24.6s] 💭 (119 chars) "Okay, the function `day_cn` is in `borax/calendars/lunardate.py` at line 352.
Let's read the code around that function."
[ 24.6s] 📖 read_file (borax/calendars/lunardate.py)
[ 24.6s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': ' ANIMALS =
\'鼠牛虎兔龙蛇马羊猴鸡狗猪\'\n\n @staticme…
[ 30.7s] 💭 (150 chars) "I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand how they are defined.
They are probably defined ear..."
[ 30.7s] 📖 read_file (borax/calendars/lunardate.py)
[ 30.8s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': ' value_offset = [0,
15]\n year_in…
[ 247.8s] 💭 (7731 chars) "Okay, I see the definitions:
```python
TENS = '初十廿卅'
DAYS_CN = '日一二三四五六七八九十'
```
Wait:
Index 0: 初
Index 1: 十
Ind..."
[ 247.8s] 🔧 run_command (16 lines) python3 - <<'PY'
[ 247.9s] → Day 20: 廿十
[ 259.2s] 💭 (256 chars) "The reproduction confirms the bug.
Wait, I noticed `ld20.cn_str()` outputted `二〇二〇年十月廿十`.
And `ld30.cn_str()` outputted ..."
[ 259.2s] 📖 read_file (borax/calendars/lunardate.py)
[ 259.3s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': ' def term(self) -> str:\n
return self…
[ 316.9s] 💭 (2366 chars) "Yes, `cn_day` calls `TextUtils.day_cn(self.day)`.
Now let's implement the fix in `TextUtils.day_cn`.
```python
@st..."
[ 316.9s] ✏️ edit_file (borax/calendars/lunardate.py)
[ 317.1s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'occurrences': 1, 'strategy': 'exact',
'diff': '--- a/borax…
[ 339.1s] 💭 (25 chars) "Now let's verify the fix."
[ 339.1s] 🔧 run_command (20 lines) python3 - <<'PY'
[ 339.2s] → Day 1: 初一 (Expected: 初一) - OK
[ 344.0s] 💭 (153 chars) "Everything looks correct. Now I'll check for any other possible locations where this logic
might be duplicated.
Searchin..."
[ 344.0s] 🔧 run_command grep -rn --include="*.py" "day_cn" borax/
[ 344.0s] → borax/calendars/lunardate.py:352: def day_cn(day: int) -> str:
[ 373.1s] 💭 (852 chars) "Only one implementation of `day_cn`, and it's used in `LunarDate.cn_day`.
I have verified it now.
Let's double check th..."
[ 373.1s] 🔧 run_command git status --short && git diff
[ 373.1s] → M borax/calendars/lunardate.py
[ 397.8s] 💭 (859 chars) "The diff looks good and minimal.
One final check on `TENS` and `DAYS_CN`.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
If ..."
[ 397.8s] 🤖 submit_patch
[ 397.9s] → submit_patch: {"status": "ok", "patch_size": 457, "files_changed": 1}
[ 412.9s] 💭 (324 chars) "The patch has been submitted.
Final summary:
The bug was that `TextUtils.day_cn` used "廿" and "卅" as prefixes for the 20..."
[ 412.9s] ✅ Agent finished: The bug was caused by `TextUtils.day_cn` incorrectly combining the tens digit a prefix
("廿" for 20, "卅" for 30) with the day "十" for the 20th and 30th days of the lunar month, resulting in "廿十" and
"卅...
Native result row
{
"agent_error": null,
"duration_seconds": 416.81,
"error": null,
"grade": {
"collected_tests": 128,
"competition_junit_ok": true,
"error": null,
"required_issues_count": 0,
"resolved": true,
"status_counts": {
"PASSED": 128
},
"strict_clean_patch": true,
"test_exit_code": 0
},
"instance_id": "kinegratii__borax-23",
"pass_idx": 0,
"patch_chars": 457,
"phase1_seconds": 415.62,
"repo": "kinegratii/borax",
"request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/kinegratii__borax-23__p0__r7.jsonl",
"resolved": true,
"rollout_idx": 7,
"run_key": "kinegratii__borax-23__p0__r7",
"strict_clean_patch": true,
"tool_calls": 9,
"total_llm_calls": 11,
"trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_kinegratii__borax-23__p0__r7.json"
}