ROLLOUT 1 · kinegratii/borax
kinegratii__borax-23
Solved
309 stotal time
11tool calls
13model calls
5,075tokens generated
110,556prompt tokens read
No error recorded
⚠ The request log has 12 model calls but the trace has 14 agent calls, so tokens are listed separately instead of beside each turn.
Turn by turn
Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.
System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`. Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run. ## Critical Environment & Grader Rules 1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`. 2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files. 3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`. 4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks: `pytest path/to/test_file.py -k pattern -q --tb=short --no-header` If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off. 5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission. ## Execution Protocol ### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls) - The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories. - Run a single compound `run_command` with `grep -rn --include="*.py"` to locate: (a) the exact symbols, error strings, or functions from the problem description, (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and (c) the closest existing unit test files under `tests/`. ### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls) - Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests. - Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types. ### Phase 3 — Reproduce Bug in One Call (1 tool call) - Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts. ### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls) - Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`. - Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests. - **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`. ### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls) - Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`. - Run `git status --short && git diff` via `run_command`. Confirm: - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately), - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched), - Minimal, clean diff with valid imports and indentation. - Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 3,273 characters
You are evaluating a software engineering task for repository kinegratii/borax. Problem Statement: 农历日“二十”“三十”中文名称错误 ## 发现版本 v3.4.0 ## 问题描述 “廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。 ## 代码示例 ```python from borax.calendars.lunardate import LunarDate, TextUtils print(TextUtils.day_cn(20)) # “廿十” ld = LunarDate(2020, 10, 20, 0) print(ld.cn_day) # “廿十” print(ld.cn_day_calendar) # “廿十” print(ld.cn_str()) # “廿十” ``` ## 建议方案 只需要修改 `TextUtils.day_cn` 逻辑即可，其他函数均是调用该函数。 ## Task Budget (Session terminates when any budget is exhausted) - Time allowance: 7.5 minutes - Tool calls allowance: 30 calls - Max loop iterations: 40 turns ## Execution Environment Rules - Single command timeout: 90 seconds (commands exceeding this fail without ending the session) - Command output limit: 5000 characters - File view limit: 150 lines per read_file call - File character limit: 10000 characters per read_file call - Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages. ## Instructions: 0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages. 1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules. 2. Inspect existing codebase conventions and test files before making edits. 3. Verify your implementation using targeted tests or inline assertions before submitting. 4. Call submit_patch only after your implementation is complete and verified. 5. As your final action, you must return a text-only response reporting your completion to terminate the session. ## Workspace Layout The repository is located at `/workspace`. Here is the directory tree (up to 3 levels): ``` ./LICENSE ./MANIFEST.in ./README.md ./borax ./borax/__init__.py ./borax/calendars ./borax/calendars/FestivalData.txt ./borax/calendars/__init__.py ./borax/calendars/birthday.py ./borax/calendars/festivals.py ./borax/calendars/lunardate.py ./borax/calendars/store.py ./borax/calendars/utils.py ./borax/choices.py ./borax/constants.py ./borax/counters ./borax/counters/__init__.py ./borax/counters/daily.py ./borax/counters/serial_pool.py ./borax/counters/serials.py ./borax/datasets ./borax/datasets/__init__.py ./borax/datasets/fetch.py ./borax/datasets/join_.py ./borax/devtools.py ./borax/finance.py ./borax/htmls.py ./borax/numbers.py ./borax/patterns ./borax/patterns/__init__.py ./borax/patterns/lazy.py ./borax/patterns/proxy.py ./borax/patterns/singleton.py ./borax/serialize ./borax/serialize/__init__.py ./borax/serialize/bjson.py ./borax/serialize/cjson.py ./borax/strings.py ./borax/structures ./borax/structures/__init__.py ./borax/structures/dictionary.py ./borax/structures/percentage.py ./borax/structures/tree.py ./borax/system.py ./borax/ui ./borax/ui/__init__.py ./borax/ui/aiotk.py ./borax/ui/widgets.py ./borax/utils.py ./docs ./examples ./long_description.rst ./pyproject.toml ./requirements_dev.txt ./setup.cfg ./setup.py ./tests ./tools ./tools/validate_lunar.py ```
Turn 1at 11 s133 tokens out3,114 prompt tokens
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`. Specifically, for days 20 and 30 of the lunar calendar, it returns "廿十" and "卅十", which are incorrect. It should return "二十" and "三十". Let's start by locating the `TextUtils.day_cn` method in `borax/calendars/lunardate.py`.
TOOL CALL · run_command
{
"command": "grep -rn \"day_cn\" borax/calendars/lunardate.py"
}Result of run_command 158 characters
{
"status": "ok",
"stdout": "352: def day_cn(day: int) -> str:\n445: return '{}'.format(TextUtils.day_cn(self.day))\n",
"stderr": "",
"exit_code": 0
}Turn 2at 18 s93 tokens out3,325 prompt tokens
Okay, `TextUtils.day_cn` is on line 352 of `borax/calendars/lunardate.py`. Let's read the implementation of `day_cn` and the `TextUtils` class.
TOOL CALL · read_file
{
"end_line": 370,
"filepath": "borax/calendars/lunardate.py",
"start_line": 340
}Result of read_file 1,126 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": " ANIMALS = '鼠牛虎兔龙蛇马羊猴鸡狗猪'\n\n @staticmethod\n def year_cn(year: int) -> str:\n s = ''.join([TextUtils.MONTHS_CN[int(c)] for c in str(year)])\n return s.replace('正', '一')\n\n @staticmethod\n def month_cn(month: int) -> str:\n return TextUtils.MONTHS_CN[month]\n\n @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n\n @staticmethod\n def get_gz_cn(offset: int) -> str:\n \"\"\"Get n-th(0-based) GanZhi\n \"\"\"\n return TextUtils.STEMS[offset % 10] + TextUtils.BRANCHES[offset % 12]\n\n\nclass LunarDate(EncoderMixin):\n fields = [f_year, f_month, f_day, f_leap]\n\n def __init__(self, year: int, month: int, day: int, leap: Leap = False):",
"start_line": 340,
"end_line": 370,
"total_lines": 679,
"is_truncated": false
}Turn 3at 30 s220 tokens out3,850 prompt tokens
The implementation of `day_cn` is:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand why it's producing "廿十" and "卅十". They are likely defined earlier in the `TextUtils` class or in the module.
Let's read the `TextUtils` class definitions.
TOOL CALL · read_file
{
"end_line": 350,
"filepath": "borax/calendars/lunardate.py",
"start_line": 300
}Result of read_file 2,003 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": " value_offset = [0, 15]\n year_index = year - 1900\n days = [int(c) + value_offset[i % 2] for i, c in enumerate(TERM_INFO[year_index])]\n return days\n\n @staticmethod\n def get_term_info(year, month, day):\n \"\"\"Parse solar term and stem-branch year/month/day from a solar date.\n (sy, sm, sd) => (term, next_gz_month)\n term for year 2101,:2101.1.5(初六) 小寒 2101.1.20(廿一) 大寒\n \"\"\"\n if year == 2101:\n days = [5, 20]\n else:\n days = TermUtils.parse_term_days(year)\n term_index1 = 2 * (month - 1)\n term_index2 = 2 * (month - 1) + 1\n day1 = days[term_index1]\n day2 = days[term_index2]\n if day == day1:\n term_name = TERMS_CN[term_index1]\n elif day == day2:\n term_name = TERMS_CN[term_index2]\n else:\n term_name = None\n\n next_gz_month = day >= day1\n return term_name, next_gz_month\n\n\n# ------ Stems and Branches ------\n\n\nclass TextUtils:\n MONTHS_CN = '〇正二三四五六七八九十冬腊'\n TENS = '初十廿卅'\n DAYS_CN = '日一二三四五六七八九十'\n\n STEMS = '甲乙丙丁戊己庚辛壬癸'\n BRANCHES = '子丑寅卯辰巳午未申酉戌亥'\n ANIMALS = '鼠牛虎兔龙蛇马羊猴鸡狗猪'\n\n @staticmethod\n def year_cn(year: int) -> str:\n s = ''.join([TextUtils.MONTHS_CN[int(c)] for c in str(year)])\n return s.replace('正', '一')\n\n @staticmethod\n def month_cn(month: int) -> str:\n return TextUtils.MONTHS_CN[month]\n",
"start_line": 300,
"end_line": 350,
"total_lines": 679,
"is_truncated": false
}Turn 4at 144 s1,549 tokens out4,738 prompt tokens
Definitions:
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
Let's trace `day_cn(20)`:
`day = 20`
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`if b == 0:` (True)
`b = 10`
`if a == 1:` (False, a=2)
Return `TextUtils.TENS[2] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[2]` is '廿'
`TextUtils.DAYS_CN[10]` is '十'
Result: '廿十'
Wait, '廿' means twenty. So '廿十' is redundant. It should be '二十'.
Similarly for 30:
`a, b = divmod(30, 10)` -> `a = 3, b = 0`
`b = 10`
`a = 3`
Return `TextUtils.TENS[3] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[3]` is '卅'
`TextUtils.DAYS_CN[10]` is '十'
Result: '卅十' (卅 means thirty).
The issue says "廿十" and "卅十" are incorrect, and it should be "二十" and "三十".
Wait, if `day` is 20, we want "二十".
`TextUtils.TENS[0]` is '初'
`TextUtils.TENS[1]` is '十'
`TextUtils.TENS[2]` is '廿'
`TextUtils.TENS[3]` is '卅'
If `day` is 20, `a=2, b=0`.
If `b=0`, `b` becomes 10.
If we want "二十", we need `TextUtils.TENS[1]` ('十') and `TextUtils.DAYS_CN[2]` ('二')? No, `DAYS_CN` is used for 1-10.
Wait, if `day` is 20, we want "二十".
If `day` is 10, `a=1, b=0`. `b=10`, `a=0`. `TENS[0]` ('初') + `DAYS_CN[10]` ('十') = '初十'. This is correct.
If `day` is 20, we want "二十".
`TENS[1]` ('十') + `DAYS_CN[2]` ('二') = '十二'? No.
Let's see how "二十" should be constructed.
"二" is `DAYS_CN[2]`.
"十" is `DAYS_CN[10]` or `TENS[1]`.
Wait, usually for lunar dates:
1-9: 初一, 初二, ..., 初九
10: 初十
11-19: 十一, 十二, ..., 十九
20: 二十
21-29: 二十一, ..., 二十九
30: 三十
So:
1-9: `TENS[0]` ('初') + `DAYS_CN[day]` ('一'...'九')
10: `TENS[0]` ('初') + `DAYS_CN[10]` ('十')
11-19: `TENS[1]` ('十') + `DAYS_CN[day%10]` ('一'...'九')
20: `TENS[1]` ('十') + `DAYS_CN[2]` ('二') ? No, that's '十二'.
Actually it should be "二" + "十".
Wait, `TENS` seems to be for the prefix.
`TENS[0]` : 初 (1-10)
`TENS[1]` : 十 (11-20)
`TENS[2]` : 廿 (21-30)
`TENS[3]` : 卅 (31-40)
But "二十" and "三十" are special.
If `day` is 20, we want "二十".
If `day` is 30, we want "三十".
Wait, for `day` = 20:
Current logic: `a=2, b=0` -> `b=10`. `TENS[2]`('廿') + `DAYS_CN[10]`('十') = '廿十'.
If we want '二十', we need `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十').
For `day` = 21:
Current logic: `a=2, b=1`. `TENS[2]`('廿') + `DAYS_CN[1]`('一') = '廿一'. (This is correct).
For `day` = 30:
Current logic: `a=3, b=0` -> `b=10`. `TENS[3]`('卅') + `DAYS_CN[10]`('十') = '卅十'.
If we want '三十', we need `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十').
For `day` = 31: (Though lunar months have max 30 days, but just in case)
Current logic: `a=3, b=1`. `TENS[3]`('卅') + `DAYS_CN[1]`('一') = '卅一'. (This is correct).
So the bug is specifically when `day` is 20 or 30.
Let's verify this with a reproduction script.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\nprint(f\"day_cn(20): {TextUtils.day_cn(20)}\")\nprint(f\"day_cn(30): {TextUtils.day_cn(30)}\")\nprint(f\"day_cn(10): {TextUtils.day_cn(10)}\")\nprint(f\"day_cn(21): {TextUtils.day_cn(21)}\")\nprint(f\"day_cn(31): {TextUtils.day_cn(31)}\")\n\nld20 = LunarDate(2020, 10, 20, 0)\nprint(f\"ld20.cn_day: {ld20.cn_day}\")\n\nld30 = LunarDate(2020, 10, 30, 0)\nprint(f\"ld30.cn_day: {ld30.cn_day}\")\nPY\n"
}Result of run_command 244 characters
{
"status": "ok",
"stdout": "day_cn(20): 廿十\nday_cn(30): 卅十\nday_cn(10): 初十\nday_cn(21): 廿一\nday_cn(31): 卅一\nld20.cn_day: 廿十\nld30.cn_day: 卅十\n",
"stderr": "",
"exit_code": 0
}Turn 5at 234 s1,840 tokens out6,410 prompt tokens
The reproduction confirms the issue.
To fix `day_cn(day)`:
If `day == 20`, return "二十"
If `day == 30`, return "三十"
Otherwise, keep existing logic?
Let's see:
For `day = 20`, existing logic returns `TENS[2] + DAYS_CN[10]` = '廿十'.
For `day = 30`, existing logic returns `TENS[3] + DAYS_CN[10]` = '卅十'.
For `day = 10`, existing logic returns `TENS[0] + DAYS_CN[10]` = '初十'. (Correct)
So we just need to handle 20 and 30 specially.
Current logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day == 20`: `a=2, b=0` -> `b=10`. `a=2`. returns `TENS[2]+DAYS_CN[10]` = '廿十'.
If we want '二十', we can't easily use `TENS[a]`.
'二' is `DAYS_CN[2]`.
'十' is `DAYS_CN[10]`.
Wait, what if we change the logic to:
```python
@staticmethod
def day_cn(day: int) -> str:
if day == 20:
return '二十'
if day == 30:
return '三十'
a, b = divmod(day, 10)
if b == 0: # 10,20,30 (but 20,30 handled above)
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
This seems the most straightforward fix.
Wait, let's check if there are other cases.
`day` is usually 1-30.
`day = 1`: `a=0, b=1` -> `TENS[0]`('初') + `DAYS_CN[1]`('一') = '初一'. Correct.
`day = 10`: `a=1, b=0` -> `b=10, a=0`. `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. Correct.
`day = 11`: `a=1, b=1` -> `TENS[1]`('十') + `DAYS_CN[1]`('一') = '十一'. Correct.
`day = 20`: handled -> '二十'. Correct.
`day = 21`: `a=2, b=1` -> `TENS[2]`('廿') + `DAYS_CN[1]`('一') = '廿一'. Correct.
`day = 30`: handled -> '三十'. Correct.
Wait, maybe I can make it more generic?
If `b == 0` and `a >= 2`:
Return `DAYS_CN[a] + DAYS_CN[10]`?
`day = 20` -> `a=2, b=0`. `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十') = '二十'.
`day = 30` -> `a=3, b=0`. `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十') = '三十'.
This works!
Let's see:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
if a >= 2: # 20,30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
b = 10 # 10
a = 0 # 10
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Testing `day=10`: `a=1, b=0`. `b=0` is True. `a >= 2` is False. `b=10, a=0`. returns `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. Correct.
Testing `day=20`: `a=2, b=0`. `b=0` is True. `a >= 2` is True. returns `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十') = '二十'. Correct.
Testing `day=30`: `a=3, b=0`. `b=0` is True. `a >= 2` is True. returns `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十') = '三十'. Correct.
Wait, what if `day` is 0? `a=0, b=0`. `b=0` True, `a>=2` False, `b=10, a=0`. `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. But `day` shouldn't be 0.
What if `day` is 40? `a=4, b=0`. `b=0` True, `a>=2` True. `DAYS_CN[4]` + `DAYS_CN[10]` = '四十'. Correct.
So this logic is more robust.
Let's double check the `TENS` and `DAYS_CN` values again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
`TENS[0]` = '初'
`TENS[1]` = '十'
`TENS[2]` = '廿'
`TENS[3]` = '卅'
`DAYS_CN[0]` = '日'
`DAYS_CN[1]` = '一'
`DAYS_CN[2]` = '二'
`DAYS_CN[3]` = '三'
...
`DAYS_CN[10]` = '十'
Correct.
Now let's apply the fix.
TOOL CALL · edit_file
{
"filepath": "borax/calendars/lunardate.py",
"new_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n if a >= 2: # 20,30\n return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n b = 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n",
"old_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n"
}Result of edit_file 610 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"occurrences": 1,
"strategy": "exact",
"diff": "--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -352,9 +352,10 @@\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n+ if a >= 2: # 20,30\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n b = 10\n- if a == 1: # 10\n- a = 0\n+ a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"is_truncated": false
}Turn 6at 256 s335 tokens out8,519 prompt tokens
Now let's verify the fix with the reproduction script and some additional cases.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\ntests = {\n 1: \"初一\",\n 9: \"初九\",\n 10: \"初十\",\n 11: \"十一\",\n 19: \"十九\",\n 20: \"二十\",\n 21: \"廿一\",\n 29: \"廿九\",\n 30: \"三十\",\n}\n\nfor day, expected in tests.items():\n actual = TextUtils.day_cn(day)\n print(f\"day={day:2}: expected={expected}, actual={actual}, {'OK' if actual == expected else 'FAIL'}\")\n\nld20 = LunarDate(2020, 10, 20, 0)\nprint(f\"ld20.cn_day: {ld20.cn_day}, expected=二十, {'OK' if ld20.cn_day == '二十' else 'FAIL'}\")\n\nld30 = LunarDate(2020, 10, 30, 0)\nprint(f\"ld30.cn_day: {ld30.cn_day}, expected=三十, {'OK' if ld30.cn_day == '三十' else 'FAIL'}\")\nPY\n"
}Result of run_command 672 characters
{
"status": "ok",
"stdout": "day= 1: expected=初一, actual=初一, OK\nday= 9: expected=初九, actual=初九, OK\nday=10: expected=初十, actual=初十, OK\nday=11: expected=十一, actual=十一, OK\nday=19: expected=十九, actual=十九, OK\nday=20: expected=二十, actual=二十, OK\nday=21: expected=廿一, actual=廿一, OK\nday=29: expected=廿九, actual=廿九, OK\nday=30: expected=三十, actual=三十, OK\nld20.cn_day: 二十, expected=二十, OK\nld30.cn_day: 三十, expected=三十, OK\n",
"stderr": "",
"exit_code": 0
}Turn 7at 259 s49 tokens out9,082 prompt tokens
All tests passed. Now I should check if there are any existing tests for `LunarDate` that I should run.
TOOL CALL · run_command
{
"command": "grep -rn \"LunarDate\" tests/"
}Result of run_command 5,121 characters
{
"status": "ok",
"stdout": "tests/test_birthday.py:5:from borax.calendars.lunardate import LunarDate\ntests/test_birthday.py:11: birthday = LunarDate(2017, 6, 16, 1)\ntests/test_birthday.py:12: self.assertEqual(1, nominal_age(birthday, LunarDate(2017, 6, 21, 1)))\ntests/test_birthday.py:13: self.assertEqual(1, nominal_age(birthday, LunarDate(2017, 12, 29)))\ntests/test_birthday.py:14: self.assertEqual(2, nominal_age(birthday, LunarDate(2018, 1, 1)))\ntests/test_lunar_benchmark.py:6: LunarDate, MAX_OFFSET,\ntests/test_lunar_benchmark.py:15: self.assertEqual(MAX_OFFSET, LunarDate.max.offset)\ntests/test_lunar_benchmark.py:16: self.assertEqual(MAX_OFFSET, (LunarDate.max - LunarDate.min).days)\ntests/test_lunar_benchmark.py:19: self.assertEqual(0, (LunarDate.min - MIN_SOLAR_DATE).days)\ntests/test_lunar_benchmark.py:20: self.assertEqual(0, (LunarDate.max - MAX_SOLAR_DATE).days)\ntests/test_lunar_benchmark.py:22: sd2100_ld = LunarDate.from_solar_date(2100, 12, 31)\ntests/test_lunar_benchmark.py:24: sd2101_ld = LunarDate.from_solar_date(2101, 1, 28)\ntests/test_mixed.py:8:from borax.calendars.lunardate import LunarDate\ntests/test_mixed.py:19: self.assertTrue(md1.match(LunarDate(2018, 1, 2)))\ntests/test_mixed.py:46: self.assertEqual(1, ls.countdown(LunarDate(2019, 4, 1)))\ntests/test_mixed.py:47: self.assertEqual(0, ls.countdown(LunarDate(2019, 4, 2)))\ntests/test_mixed.py:48: self.assertEqual(353, ls.countdown(LunarDate(2019, 4, 3)))\ntests/test_mixed.py:63: self.assertEqual(1, (LunarDate(2019, 1, 1) - dls.resolve(2018)).days)\ntests/test_mixed.py:81: self.assertTrue(ls.match(LunarDate(2017, 6, 1, 0)))\ntests/test_mixed.py:82: self.assertTrue(ls.match(LunarDate(2017, 6, 1, 1)))\ntests/test_mixed.py:85: self.assertTrue(ls1.match(LunarDate(2017, 6, 1, 0)))\ntests/test_mixed.py:86: self.assertFalse(ls1.match(LunarDate(2017, 6, 1, 1)))\ntests/test_mixed.py:89: self.assertFalse(ls2.match(LunarDate(2017, 6, 1, 0)))\ntests/test_mixed.py:90: self.assertTrue(ls2.match(LunarDate(2017, 6, 1, 1)))\ntests/test_mixed.py:94: ls.delta(LunarDate(2017, 6, 27))\ntests/test_mixed.py:115: self.assertTrue(md2.match(LunarDate(2017, 6, 14)))\ntests/test_mixed.py:116: self.assertTrue(md2.match(LunarDate(2017, 6, 14, 1)))\ntests/test_mixed.py:117: sd = LunarDate(2017, 6, 14).to_solar_date()\ntests/test_mixed.py:121: self.assertTrue(md3.match(LunarDate(2017, 6, 14)))\ntests/test_mixed.py:122: self.assertTrue(md3.match(LunarDate(2017, 6, 14, 1)))\ntests/test_mixed.py:123: sd = LunarDate(2017, 6, 14).to_solar_date()\ntests/test_lunardate.py:7:from borax.calendars.lunardate import LunarDate, parse_year_days, LCalendars, InvalidLunarDateError\ntests/test_lunardate.py:10:class LunarDateTestCase(unittest.TestCase):\ntests/test_lunardate.py:12: ld = LunarDate(1976, 8, 8, 1)\ntests/test_lunardate.py:19: today = LunarDate.today()\ntests/test_lunardate.py:20: self.assertEqual(1, LCalendars.delta(LunarDate.tomorrow(), today))\ntests/test_lunardate.py:21: self.assertEqual(-1, LCalendars.delta(LunarDate.yesterday(), today))\ntests/test_lunardate.py:26: dt = LunarDate(1976, 8, 8, 1).to_solar_date()\ntests/test_lunardate.py:28: dt2 = LunarDate.from_solar_date(2033, 10, 23)\ntests/test_lunardate.py:29: self.assertTrue(LunarDate(2033, 10, 1, 0), dt2)\ntests/test_lunardate.py:32: with self.assertRaises(InvalidLunarDateError):\ntests/test_lunardate.py:33: LunarDate(2004, 1, 30).to_solar_date()\ntests/test_lunardate.py:36: with self.assertRaises(InvalidLunarDateError):\ntests/test_lunardate.py:37: LunarDate(2101, 1, 1).to_solar_date()\ntests/test_lunardate.py:39: with self.assertRaises(InvalidLunarDateError):\ntests/test_lunardate.py:40: LunarDate(2019, 1, 1, 1).to_solar_date()\ntests/test_lunardate.py:43: ld = LunarDate.today()\ntests/test_lunardate.py:49: ld = LunarDate(1976, 8, 8)\ntests/test_lunardate.py:54: self.assertEqual(LunarDate(1976, 7, 27, 0), ld - td)\ntests/test_lunardate.py:56: self.assertEqual(LunarDate(1976, 8, 18, 0), ld + td)\ntests/test_lunardate.py:57: self.assertEqual(LunarDate(1976, 8, 18, 0), td + ld)\ntests/test_lunardate.py:60: ld = LunarDate(1976, 8, 8)\ntests/test_lunardate.py:61: ld2 = LunarDate.today()\ntests/test_lunardate.py:68: self.assertTrue(LunarDate.today() == LunarDate.today())\ntests/test_lunardate.py:71: self.assertFalse(LunarDate.today() == 5)\ntests/test_lunardate.py:73: LunarDate.today() < 5\ntests/test_lunardate.py:75: LunarDate.today() > 5\ntests/test_lunardate.py:77: LunarDate.today() >= 5\ntests/test_lunardate.py:79: LunarDate.today() >= 5\ntests/test_lunardate.py:82: ld1 = LunarDate(2018, 6, 1)\ntests/test_lunardate.py:83: ld2 = LunarDate(2018, 6, 1)\ntests/test_lunardate.py:87: ",
"stderr": "",
"exit_code": 0
}Turn 8at 263 s56 tokens out11,299 prompt tokens
`tests/test_lunardate.py` seems relevant. Let's run it.
TOOL CALL · run_command
{
"command": "pytest tests/test_lunardate.py -q --tb=short --no-header"
}Result of run_command 161 characters
{
"status": "ok",
"stdout": "................ [100%]\n16 passed in 0.02s\n",
"stderr": "",
"exit_code": 0
}Turn 9at 269 s80 tokens out11,415 prompt tokens
All tests in `tests/test_lunardate.py` passed. I should also check if there are any other tests that use `TextUtils.day_cn` or `cn_day`.
TOOL CALL · run_command
{
"command": "grep -rn \"day_cn\" tests/\ngrep -rn \"cn_day\" tests/\n"
}Result of run_command 142 characters
{
"status": "ok",
"stdout": "tests/test_lunardate.py:102: self.assertEqual('初十', ld2.cn_day)\n",
"stderr": "",
"exit_code": 0
}Turn 10at 274 s72 tokens out11,563 prompt tokens
Only `tests/test_lunardate.py:102` uses `cn_day`. Let's see what's around there.
TOOL CALL · read_file
{
"end_line": 110,
"filepath": "tests/test_lunardate.py",
"start_line": 90
}Result of read_file 1,019 characters
{
"status": "ok",
"filepath": "tests/test_lunardate.py",
"content": " self.assertEqual('立秋', ld.term)\n self.assertEqual('戊戌', ld.gz_year)\n self.assertEqual('庚申', ld.gz_month)\n self.assertEqual('辛未', ld.gz_day)\n self.assertEqual('二〇一八年六月廿六', ld.cn_str())\n self.assertEqual('戊戌年庚申月辛未日', ld.gz_str())\n\n ld1 = LunarDate(2018, 12, 20)\n self.assertEqual('戊戌', ld1.gz_year)\n self.assertEqual('狗', ld.animal)\n\n ld2 = LunarDate(2018, 12, 10)\n self.assertEqual('初十', ld2.cn_day)\n\n def test_new_date(self):\n ld = LunarDate(2018, 12, 10)\n ld1 = ld.replace(year=2017, month=6, day=23, leap=1)\n self.assertEqual(2017, ld1.year)\n\n\nclass PrivateMethodsTestCase(unittest.TestCase):",
"start_line": 90,
"end_line": 110,
"total_lines": 176,
"is_truncated": false
}Turn 11at 277 s52 tokens out11,996 prompt tokens
It only tests `初十`. I'm confident in the fix. Let me double check `git status --short && git diff`.
TOOL CALL · run_command
{
"command": "git status --short && git diff"
}Result of run_command 691 characters
{
"status": "ok",
"stdout": " M borax/calendars/lunardate.py\ndiff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py\nindex b7adda7..46073e8 100644\n--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -352,9 +352,10 @@ class TextUtils:\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n+ if a >= 2: # 20,30\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n b = 10\n- if a == 1: # 10\n- a = 0\n+ a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"stderr": "",
"exit_code": 0
}Turn 12at 299 s480 tokens out12,363 prompt tokens
The diff looks correct.
One final check on the logic for `day_cn`:
- `day=10`: `a=1, b=0`. `b==0` True. `a>=2` False. `b=10, a=0`. returns `TENS[0]('初') + DAYS_CN[10]('十')` = '初十'. Correct.
- `day=20`: `a=2, b=0`. `b==0` True. `a>=2` True. returns `DAYS_CN[2]('二') + DAYS_CN[10]('十')` = '二十'. Correct.
- `day=30`: `a=3, b=0`. `b==0` True. `a>=2` True. returns `DAYS_CN[3]('三') + DAYS_CN[10]('十')` = '三十'. Correct.
- `day=1`..`9`: `a=0, b=1`..`9`. `b==0` False. returns `TENS[0]('初') + DAYS_CN[1]..[9]` = '初一'..'初九'. Correct.
- `day=11`..`19`: `a=1, b=1`..`9`. `b==0` False. returns `TENS[1]('十') + DAYS_CN[1]..[9]` = '十一'..'十九'. Correct.
- `day=21`..`29`: `a=2, b=1`..`9`. `b==0` False. returns `TENS[2]('廿') + DAYS_CN[1]..[9]` = '廿一'..'廿九'. Correct.
- `day=31`..`39`: `a=3, b=1`..`9`. `b==0` False. returns `TENS[3]('卅') + DAYS_CN[1]..[9]` = '卅一'..'卅九'. Correct.
Everything seems correct.
TOOL CALL · submit_patch
Result of submit_patch 55 characters
{
"status": "ok",
"patch_size": 581,
"files_changed": 1
}Turn 13at 306 s116 tokens out12,882 prompt tokens
I have fixed the issue where "twenty" and "thirty" in the lunar calendar were incorrectly returned as "廿十" and "卅十". The fix involves updating `TextUtils.day_cn` to return "二十" and "三十" for those specific days.
Turn 14at 306 s
The issue was caused by the logic in `TextUtils.day_cn` that produced "廿十" and "卅十" instead of "二十" and "三十". I modified the logic to explicitly handle days 20 and 30 by returning the appropriate Chinese numeral combinations.
Model calls (not matched to turns)
Generated tokens 133 tokens · stopped: STOP
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`. Specifically, for days 20 and 30 of the lunar calendar, it returns "廿十" and "卅十", which are incorrect. It should return "二十" and "三十". Let's start by locating the `TextUtils.day_cn` method in `borax/calendars/lunardate.py`.
<|channel>thought
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`.
Specifically, for days 20 and 30 of the lunar calendar, it returns "廿十" and "卅十", which are incorrect. It should return "二十" and "三十".
Let's start by locating the `TextUtils.day_cn` method in `borax/calendars/lunardate.py`.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "day_cn" borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 93 tokens · stopped: STOP
Okay, `TextUtils.day_cn` is on line 352 of `borax/calendars/lunardate.py`. Let's read the implementation of `day_cn` and the `TextUtils` class.
Okay, `TextUtils.day_cn` is on line 352 of `borax/calendars/lunardate.py`.
Let's read the implementation of `day_cn` and the `TextUtils` class.
<channel|><|tool_call>call:read_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:340,end_line:370}<tool_call|><|tool_response>
Generated tokens 220 tokens · stopped: STOP
The implementation of `day_cn` is:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand why it's producing "廿十" and "卅十". They are likely defined earlier in the `TextUtils` class or in the module.
Let's read the `TextUtils` class definitions.
The implementation of `day_cn` is:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand why it's producing "廿十" and "卅十". They are likely defined earlier in the `TextUtils` class or in the module.
Let's read the `TextUtils` class definitions.
<channel|><|tool_call>call:read_file{end_line:350,filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:300}<tool_call|><|tool_response>
Generated tokens 1,549 tokens · stopped: STOP
Definitions:
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
Let's trace `day_cn(20)`:
`day = 20`
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`if b == 0:` (True)
`b = 10`
`if a == 1:` (False, a=2)
Return `TextUtils.TENS[2] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[2]` is '廿'
`TextUtils.DAYS_CN[10]` is '十'
Result: '廿十'
Wait, '廿' means twenty. So '廿十' is redundant. It should be '二十'.
Similarly for 30:
`a, b = divmod(30, 10)` -> `a = 3, b = 0`
`b = 10`
`a = 3`
Return `TextUtils.TENS[3] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[3]` is '卅'
`TextUtils.DAYS_CN[10]` is '十'
Result: '卅十' (卅 means thirty).
The issue says "廿十" and "卅十" are incorrect, and it should be "二十" and "三十".
Wait, if `day` is 20, we want "二十".
`TextUtils.TENS[0]` is '初'
`TextUtils.TENS[1]` is '十'
`TextUtils.TENS[2]` is '廿'
`TextUtils.TENS[3]` is '卅'
If `day` is 20, `a=2, b=0`.
If `b=0`, `b` becomes 10.
If we want "二十", we need `TextUtils.TENS[1]` ('十') and `TextUtils.DAYS_CN[2]` ('二')? No, `DAYS_CN` is used for 1-10.
Wait, if `day` is 20, we want "二十".
If `day` is 10, `a=1, b=0`. `b=10`, `a=0`. `TENS[0]` ('初') + `DAYS_CN[10]` ('十') = '初十'. This is correct.
If `day` is 20, we want "二十".
`TENS[1]` ('十') + `DAYS_CN[2]` ('二') = '十二'? No.
Let's see how "二十" should be constructed.
"二" is `DAYS_CN[2]`.
"十" is `DAYS_CN[10]` or `TENS[1]`.
Wait, usually for lunar dates:
1-9: 初一, 初二, ..., 初九
10: 初十
11-19: 十一, 十二, ..., 十九
20: 二十
21-29: 二十一, ..., 二十九
30: 三十
So:
1-9: `TENS[0]` ('初') + `DAYS_CN[day]` ('一'...'九')
10: `TENS[0]` ('初') + `DAYS_CN[10]` ('十')
11-19: `TENS[1]` ('十') + `DAYS_CN[day%10]` ('一'...'九')
20: `TENS[1]` ('十') + `DAYS_CN[2]` ('二') ? No, that's '十二'.
Actually it should be "二" + "十".
Wait, `TENS` seems to be for the prefix.
`TENS[0]` : 初 (1-10)
`TENS[1]` : 十 (11-20)
`TENS[2]` : 廿 (21-30)
`TENS[3]` : 卅 (31-40)
But "二十" and "三十" are special.
If `day` is 20, we want "二十".
If `day` is 30, we want "三十".
Wait, for `day` = 20:
Current logic: `a=2, b=0` -> `b=10`. `TENS[2]`('廿') + `DAYS_CN[10]`('十') = '廿十'.
If we want '二十', we need `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十').
For `day` = 21:
Current logic: `a=2, b=1`. `TENS[2]`('廿') + `DAYS_CN[1]`('一') = '廿一'. (This is correct).
For `day` = 30:
Current logic: `a=3, b=0` -> `b=10`. `TENS[3]`('卅') + `DAYS_CN[10]`('十') = '卅十'.
If we want '三十', we need `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十').
For `day` = 31: (Though lunar months have max 30 days, but just in case)
Current logic: `a=3, b=1`. `TENS[3]`('卅') + `DAYS_CN[1]`('一') = '卅一'. (This is correct).
So the bug is specifically when `day` is 20 or 30.
Let's verify this with a reproduction script.
Definitions:
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
Let's trace `day_cn(20)`:
`day = 20`
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`if b == 0:` (True)
`b = 10`
`if a == 1:` (False, a=2)
Return `TextUtils.TENS[2] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[2]` is '廿'
`TextUtils.DAYS_CN[10]` is '十'
Result: '廿十'
Wait, '廿' means twenty. So '廿十' is redundant. It should be '二十'.
Similarly for 30:
`a, b = divmod(30, 10)` -> `a = 3, b = 0`
`b = 10`
`a = 3`
Return `TextUtils.TENS[3] + TextUtils.DAYS_CN[10]`
`TextUtils.TENS[3]` is '卅'
`TextUtils.DAYS_CN[10]` is '十'
Result: '卅十' (卅 means thirty).
The issue says "廿十" and "卅十" are incorrect, and it should be "二十" and "三十".
Wait, if `day` is 20, we want "二十".
`TextUtils.TENS[0]` is '初'
`TextUtils.TENS[1]` is '十'
`TextUtils.TENS[2]` is '廿'
`TextUtils.TENS[3]` is '卅'
If `day` is 20, `a=2, b=0`.
If `b=0`, `b` becomes 10.
If we want "二十", we need `TextUtils.TENS[1]` ('十') and `TextUtils.DAYS_CN[2]` ('二')? No, `DAYS_CN` is used for 1-10.
Wait, if `day` is 20, we want "二十".
If `day` is 10, `a=1, b=0`. `b=10`, `a=0`. `TENS[0]` ('初') + `DAYS_CN[10]` ('十') = '初十'. This is correct.
If `day` is 20, we want "二十".
`TENS[1]` ('十') + `DAYS_CN[2]` ('二') = '十二'? No.
Let's see how "二十" should be constructed.
"二" is `DAYS_CN[2]`.
"十" is `DAYS_CN[10]` or `TENS[1]`.
Wait, usually for lunar dates:
1-9: 初一, 初二, ..., 初九
10: 初十
11-19: 十一, 十二, ..., 十九
20: 二十
21-29: 二十一, ..., 二十九
30: 三十
So:
1-9: `TENS[0]` ('初') + `DAYS_CN[day]` ('一'...'九')
10: `TENS[0]` ('初') + `DAYS_CN[10]` ('十')
11-19: `TENS[1]` ('十') + `DAYS_CN[day%10]` ('一'...'九')
20: `TENS[1]` ('十') + `DAYS_CN[2]` ('二') ? No, that's '十二'.
Actually it should be "二" + "十".
Wait, `TENS` seems to be for the prefix.
`TENS[0]` : 初 (1-10)
`TENS[1]` : 十 (11-20)
`TENS[2]` : 廿 (21-30)
`TENS[3]` : 卅 (31-40)
But "二十" and "三十" are special.
If `day` is 20, we want "二十".
If `day` is 30, we want "三十".
Wait, for `day` = 20:
Current logic: `a=2, b=0` -> `b=10`. `TENS[2]`('廿') + `DAYS_CN[10]`('十') = '廿十'.
If we want '二十', we need `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十').
For `day` = 21:
Current logic: `a=2, b=1`. `TENS[2]`('廿') + `DAYS_CN[1]`('一') = '廿一'. (This is correct).
For `day` = 30:
Current logic: `a=3, b=0` -> `b=10`. `TENS[3]`('卅') + `DAYS_CN[10]`('十') = '卅十'.
If we want '三十', we need `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十').
For `day` = 31: (Though lunar months have max 30 days, but just in case)
Current logic: `a=3, b=1`. `TENS[3]`('卅') + `DAYS_CN[1]`('一') = '卅一'. (This is correct).
So the bug is specifically when `day` is 20 or 30.
Let's verify this with a reproduction script.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
print(f"day_cn(20): {TextUtils.day_cn(20)}")
print(f"day_cn(30): {TextUtils.day_cn(30)}")
print(f"day_cn(10): {TextUtils.day_cn(10)}")
print(f"day_cn(21): {TextUtils.day_cn(21)}")
print(f"day_cn(31): {TextUtils.day_cn(31)}")
ld20 = LunarDate(2020, 10, 20, 0)
print(f"ld20.cn_day: {ld20.cn_day}")
ld30 = LunarDate(2020, 10, 30, 0)
print(f"ld30.cn_day: {ld30.cn_day}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 1,840 tokens · stopped: STOP
The reproduction confirms the issue.
To fix `day_cn(day)`:
If `day == 20`, return "二十"
If `day == 30`, return "三十"
Otherwise, keep existing logic?
Let's see:
For `day = 20`, existing logic returns `TENS[2] + DAYS_CN[10]` = '廿十'.
For `day = 30`, existing logic returns `TENS[3] + DAYS_CN[10]` = '卅十'.
For `day = 10`, existing logic returns `TENS[0] + DAYS_CN[10]` = '初十'. (Correct)
So we just need to handle 20 and 30 specially.
Current logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day == 20`: `a=2, b=0` -> `b=10`. `a=2`. returns `TENS[2]+DAYS_CN[10]` = '廿十'.
If we want '二十', we can't easily use `TENS[a]`.
'二' is `DAYS_CN[2]`.
'十' is `DAYS_CN[10]`.
Wait, what if we change the logic to:
```python
@staticmethod
def day_cn(day: int) -> str:
if day == 20:
return '二十'
if day == 30:
return '三十'
a, b = divmod(day, 10)
if b == 0: # 10,20,30 (but 20,30 handled above)
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
This seems the most straightforward fix.
Wait, let's check if there are other cases.
`day` is usually 1-30.
`day = 1`: `a=0, b=1` -> `TENS[0]`('初') + `DAYS_CN[1]`('一') = '初一'. Correct.
`day = 10`: `a=1, b=0` -> `b=10, a=0`. `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. Correct.
`day = 11`: `a=1, b=1` -> `TENS[1]`('十') + `DAYS_CN[1]`('一') = '十一'. Correct.
`day = 20`: handled -> '二十'. Correct.
`day = 21`: `a=2, b=1` -> `TENS[2]`('廿') + `DAYS_CN[1]`('一') = '廿一'. Correct.
`day = 30`: handled -> '三十'. Correct.
Wait, maybe I can make it more generic?
If `b == 0` and `a >= 2`:
Return `DAYS_CN[a] + DAYS_CN[10]`?
`day = 20` -> `a=2, b=0`. `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十') = '二十'.
`day = 30` -> `a=3, b=0`. `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十') = '三十'.
This works!
Let's see:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
if a >= 2: # 20,30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
b = 10 # 10
a = 0 # 10
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Testing `day=10`: `a=1, b=0`. `b=0` is True. `a >= 2` is False. `b=10, a=0`. returns `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. Correct.
Testing `day=20`: `a=2, b=0`. `b=0` is True. `a >= 2` is True. returns `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十') = '二十'. Correct.
Testing `day=30`: `a=3, b=0`. `b=0` is True. `a >= 2` is True. returns `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十') = '三十'. Correct.
Wait, what if `day` is 0? `a=0, b=0`. `b=0` True, `a>=2` False, `b=10, a=0`. `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. But `day` shouldn't be 0.
What if `day` is 40? `a=4, b=0`. `b=0` True, `a>=2` True. `DAYS_CN[4]` + `DAYS_CN[10]` = '四十'. Correct.
So this logic is more robust.
Let's double check the `TENS` and `DAYS_CN` values again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
`TENS[0]` = '初'
`TENS[1]` = '十'
`TENS[2]` = '廿'
`TENS[3]` = '卅'
`DAYS_CN[0]` = '日'
`DAYS_CN[1]` = '一'
`DAYS_CN[2]` = '二'
`DAYS_CN[3]` = '三'
...
`DAYS_CN[10]` = '十'
Correct.
Now let's apply the fix.
The reproduction confirms the issue.
To fix `day_cn(day)`:
If `day == 20`, return "二十"
If `day == 30`, return "三十"
Otherwise, keep existing logic?
Let's see:
For `day = 20`, existing logic returns `TENS[2] + DAYS_CN[10]` = '廿十'.
For `day = 30`, existing logic returns `TENS[3] + DAYS_CN[10]` = '卅十'.
For `day = 10`, existing logic returns `TENS[0] + DAYS_CN[10]` = '初十'. (Correct)
So we just need to handle 20 and 30 specially.
Current logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day == 20`: `a=2, b=0` -> `b=10`. `a=2`. returns `TENS[2]+DAYS_CN[10]` = '廿十'.
If we want '二十', we can't easily use `TENS[a]`.
'二' is `DAYS_CN[2]`.
'十' is `DAYS_CN[10]`.
Wait, what if we change the logic to:
```python
@staticmethod
def day_cn(day: int) -> str:
if day == 20:
return '二十'
if day == 30:
return '三十'
a, b = divmod(day, 10)
if b == 0: # 10,20,30 (but 20,30 handled above)
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
This seems the most straightforward fix.
Wait, let's check if there are other cases.
`day` is usually 1-30.
`day = 1`: `a=0, b=1` -> `TENS[0]`('初') + `DAYS_CN[1]`('一') = '初一'. Correct.
`day = 10`: `a=1, b=0` -> `b=10, a=0`. `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. Correct.
`day = 11`: `a=1, b=1` -> `TENS[1]`('十') + `DAYS_CN[1]`('一') = '十一'. Correct.
`day = 20`: handled -> '二十'. Correct.
`day = 21`: `a=2, b=1` -> `TENS[2]`('廿') + `DAYS_CN[1]`('一') = '廿一'. Correct.
`day = 30`: handled -> '三十'. Correct.
Wait, maybe I can make it more generic?
If `b == 0` and `a >= 2`:
Return `DAYS_CN[a] + DAYS_CN[10]`?
`day = 20` -> `a=2, b=0`. `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十') = '二十'.
`day = 30` -> `a=3, b=0`. `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十') = '三十'.
This works!
Let's see:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
if a >= 2: # 20,30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
b = 10 # 10
a = 0 # 10
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Testing `day=10`: `a=1, b=0`. `b=0` is True. `a >= 2` is False. `b=10, a=0`. returns `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. Correct.
Testing `day=20`: `a=2, b=0`. `b=0` is True. `a >= 2` is True. returns `DAYS_CN[2]`('二') + `DAYS_CN[10]`('十') = '二十'. Correct.
Testing `day=30`: `a=3, b=0`. `b=0` is True. `a >= 2` is True. returns `DAYS_CN[3]`('三') + `DAYS_CN[10]`('十') = '三十'. Correct.
Wait, what if `day` is 0? `a=0, b=0`. `b=0` True, `a>=2` False, `b=10, a=0`. `TENS[0]`('初') + `DAYS_CN[10]`('十') = '初十'. But `day` shouldn't be 0.
What if `day` is 40? `a=4, b=0`. `b=0` True, `a>=2` True. `DAYS_CN[4]` + `DAYS_CN[10]` = '四十'. Correct.
So this logic is more robust.
Let's double check the `TENS` and `DAYS_CN` values again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
`TENS[0]` = '初'
`TENS[1]` = '十'
`TENS[2]` = '廿'
`TENS[3]` = '卅'
`DAYS_CN[0]` = '日'
`DAYS_CN[1]` = '一'
`DAYS_CN[2]` = '二'
`DAYS_CN[3]` = '三'
...
`DAYS_CN[10]` = '十'
Correct.
Now let's apply the fix.
<channel|><|tool_call>call:edit_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,new_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
if a >= 2: # 20,30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
b = 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
<|"|>,old_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
<|"|>}<tool_call|><|tool_response>
Generated tokens 335 tokens · stopped: STOP
Now let's verify the fix with the reproduction script and some additional cases.
Now let's verify the fix with the reproduction script and some additional cases.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
tests = {
1: "初一",
9: "初九",
10: "初十",
11: "十一",
19: "十九",
20: "二十",
21: "廿一",
29: "廿九",
30: "三十",
}
for day, expected in tests.items():
actual = TextUtils.day_cn(day)
print(f"day={day:2}: expected={expected}, actual={actual}, {'OK' if actual == expected else 'FAIL'}")
ld20 = LunarDate(2020, 10, 20, 0)
print(f"ld20.cn_day: {ld20.cn_day}, expected=二十, {'OK' if ld20.cn_day == '二十' else 'FAIL'}")
ld30 = LunarDate(2020, 10, 30, 0)
print(f"ld30.cn_day: {ld30.cn_day}, expected=三十, {'OK' if ld30.cn_day == '三十' else 'FAIL'}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 49 tokens · stopped: STOP
All tests passed. Now I should check if there are any existing tests for `LunarDate` that I should run.
All tests passed. Now I should check if there are any existing tests for `LunarDate` that I should run.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "LunarDate" tests/<|"|>}<tool_call|><|tool_response>
Generated tokens 56 tokens · stopped: STOP
`tests/test_lunardate.py` seems relevant. Let's run it.
`tests/test_lunardate.py` seems relevant. Let's run it.
<channel|><|tool_call>call:run_command{command:<|"|>pytest tests/test_lunardate.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Generated tokens 80 tokens · stopped: STOP
All tests in `tests/test_lunardate.py` passed. I should also check if there are any other tests that use `TextUtils.day_cn` or `cn_day`.
All tests in `tests/test_lunardate.py` passed.
I should also check if there are any other tests that use `TextUtils.day_cn` or `cn_day`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "day_cn" tests/
grep -rn "cn_day" tests/
<|"|>}<tool_call|><|tool_response>
Generated tokens 72 tokens · stopped: STOP
Only `tests/test_lunardate.py:102` uses `cn_day`. Let's see what's around there.
Only `tests/test_lunardate.py:102` uses `cn_day`. Let's see what's around there.
<channel|><|tool_call>call:read_file{end_line:110,filepath:<|"|>tests/test_lunardate.py<|"|>,start_line:90}<tool_call|><|tool_response>
Generated tokens 52 tokens · stopped: STOP
It only tests `初十`. I'm confident in the fix. Let me double check `git status --short && git diff`.
It only tests `初十`.
I'm confident in the fix. Let me double check `git status --short && git diff`.
<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 480 tokens · stopped: STOP
The diff looks correct.
One final check on the logic for `day_cn`:
- `day=10`: `a=1, b=0`. `b==0` True. `a>=2` False. `b=10, a=0`. returns `TENS[0]('初') + DAYS_CN[10]('十')` = '初十'. Correct.
- `day=20`: `a=2, b=0`. `b==0` True. `a>=2` True. returns `DAYS_CN[2]('二') + DAYS_CN[10]('十')` = '二十'. Correct.
- `day=30`: `a=3, b=0`. `b==0` True. `a>=2` True. returns `DAYS_CN[3]('三') + DAYS_CN[10]('十')` = '三十'. Correct.
- `day=1`..`9`: `a=0, b=1`..`9`. `b==0` False. returns `TENS[0]('初') + DAYS_CN[1]..[9]` = '初一'..'初九'. Correct.
- `day=11`..`19`: `a=1, b=1`..`9`. `b==0` False. returns `TENS[1]('十') + DAYS_CN[1]..[9]` = '十一'..'十九'. Correct.
- `day=21`..`29`: `a=2, b=1`..`9`. `b==0` False. returns `TENS[2]('廿') + DAYS_CN[1]..[9]` = '廿一'..'廿九'. Correct.
- `day=31`..`39`: `a=3, b=1`..`9`. `b==0` False. returns `TENS[3]('卅') + DAYS_CN[1]..[9]` = '卅一'..'卅九'. Correct.
Everything seems correct.
The diff looks correct.
One final check on the logic for `day_cn`:
- `day=10`: `a=1, b=0`. `b==0` True. `a>=2` False. `b=10, a=0`. returns `TENS[0]('初') + DAYS_CN[10]('十')` = '初十'. Correct.
- `day=20`: `a=2, b=0`. `b==0` True. `a>=2` True. returns `DAYS_CN[2]('二') + DAYS_CN[10]('十')` = '二十'. Correct.
- `day=30`: `a=3, b=0`. `b==0` True. `a>=2` True. returns `DAYS_CN[3]('三') + DAYS_CN[10]('十')` = '三十'. Correct.
- `day=1`..`9`: `a=0, b=1`..`9`. `b==0` False. returns `TENS[0]('初') + DAYS_CN[1]..[9]` = '初一'..'初九'. Correct.
- `day=11`..`19`: `a=1, b=1`..`9`. `b==0` False. returns `TENS[1]('十') + DAYS_CN[1]..[9]` = '十一'..'十九'. Correct.
- `day=21`..`29`: `a=2, b=1`..`9`. `b==0` False. returns `TENS[2]('廿') + DAYS_CN[1]..[9]` = '廿一'..'廿九'. Correct.
- `day=31`..`39`: `a=3, b=1`..`9`. `b==0` False. returns `TENS[3]('卅') + DAYS_CN[1]..[9]` = '卅一'..'卅九'. Correct.
Everything seems correct.
<channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>
Patch, tests and logs
Final code change Included
diff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py
index b7adda7..46073e8 100644
--- a/borax/calendars/lunardate.py
+++ b/borax/calendars/lunardate.py
@@ -352,9 +352,10 @@ class TextUtils:
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
+ if a >= 2: # 20,30
+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
b = 10
- if a == 1: # 10
- a = 0
+ a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
@staticmethod
Test output Included
============================= test session starts ============================== collected 128 items tests/test_birthday.py ... [ 2%] tests/test_calendars.py .. [ 3%] tests/test_chinese_number.py .... [ 7%] tests/test_choices.py ............. [ 17%] tests/test_daily_counter.py ... [ 19%] tests/test_dictionary.py . [ 20%] tests/test_fetch.py ...... [ 25%] tests/test_finance.py ... [ 27%] tests/test_htmls.py . [ 28%] tests/test_join.py ..... [ 32%] tests/test_json.py .... [ 35%] tests/test_lazy.py ... [ 37%] tests/test_lunar_benchmark.py . [ 38%] tests/test_lunar_sqlite3_feature.py . [ 39%] tests/test_lunardate.py ................. [ 52%] tests/test_mixed.py ........... [ 60%] tests/test_new_join.py ............ [ 70%] tests/test_percentage.py ... [ 72%] tests/test_proxy.py . [ 73%] tests/test_runtime_measurer.py ... [ 75%] tests/test_serial_generattor.py ...... [ 80%] tests/test_serial_pool.py .......... [ 88%] tests/test_singleton.py . [ 89%] tests/test_string_convert.py .... [ 92%] tests/test_tree_fetcher.py ... [ 94%] tests/test_utils.py ....... [100%] ==================================== PASSES ==================================== - generated xml file: /tmp/rebench-grade-1c25d1074bdb48fc9d59a032d1c10ce6.xml -- =========================== short test summary info ============================ PASSED tests/test_birthday.py::NominalAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::ActualAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::MixedAgeTestCase::test_mixed PASSED tests/test_calendars.py::LastDayTestCase::test_fist_day_of_week PASSED tests/test_calendars.py::LastDayTestCase::test_last_day PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_lower_order PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_measure PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_order PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_display PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_value PASSED tests/test_choices.py::FieldChoiceTestCase::test_is_valid PASSED tests/test_choices.py::ChoicesItemTestCase::test_choices PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_display PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_names_and_values_and_labels PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_value PASSED tests/test_choices.py::ChoicesItemTestCase::test_is_valid PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_display PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_value PASSED tests/test_choices.py::OffsetChoicesTestCase::test_is_valid PASSED tests/test_choices.py::DirectionChoicesTestCase::test_child_class PASSED tests/test_choices.py::DirectionChoicesTestCase::test_item_overwrite PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_increase PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance_with_invalid_raw PASSED tests/test_dictionary.py::AttributeDictTestCase::test_access PASSED tests/test_fetch.py::FetchTestCase::test_fetch PASSED tests/test_fetch.py::FetchTestCase::test_fetch_single PASSED tests/test_fetch.py::FetchTestCase::test_ifetch_multiple PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_custom_getter PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_with_dict PASSED tests/test_fetch.py::FetchAsDictTestCase::test_fetch_as_dict PASSED tests/test_finance.py::CapitalNumber::test_amount_capital PASSED tests/test_finance.py::CapitalNumber::test_decimal PASSED tests/test_finance.py::CapitalNumber::test_valid_range PASSED tests/test_htmls.py::HtmlTagTest::test_html_tags PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_join.py::JoinTestCase::test_as_kwargs PASSED tests/test_json.py::CJsonTestCase::test_custom_encoder PASSED tests/test_json.py::CJsonTestCase::test_dumps PASSED tests/test_json.py::CJsonTestCase::test_mixed_encoder PASSED tests/test_json.py::CJsonTestCase::test_singledispatch PASSED tests/test_lazy.py::LazyObjectTestCase::test_delete_attr PASSED tests/test_lazy.py::LazyObjectTestCase::test_lazy_object PASSED tests/test_lazy.py::LazyObjectTestCase::test_with_kwargs PASSED tests/test_lunar_benchmark.py::BenchmarkTestCase::test_edge_dates PASSED tests/test_lunar_sqlite3_feature.py::Sqlite3CustomFieldTestCase::test_custom_field PASSED tests/test_lunardate.py::TextUtilsTestCase::test_cn_day_text PASSED tests/test_lunardate.py::LunarDateTestCase::test_comparison PASSED tests/test_lunardate.py::LunarDateTestCase::test_convert_datetime PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_specific_dates PASSED tests/test_lunardate.py::LunarDateTestCase::test_immutable_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_new_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_solar_and_lunar PASSED tests/test_lunardate.py::LunarDateTestCase::test_term_ganzhi_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_timedelta PASSED tests/test_lunardate.py::PrivateMethodsTestCase::test_year_info PASSED tests/test_lunardate.py::FormatterTestCase::test_cn_calendar_day PASSED tests/test_lunardate.py::FormatterTestCase::test_term PASSED tests/test_lunardate.py::FormatterTestCase::test_valid_format PASSED tests/test_lunardate.py::LCalendarTestCase::test_delta PASSED tests/test_lunardate.py::LCalendarTestCase::test_leap_check PASSED tests/test_lunardate.py::LCalendarTestCase::test_ndays PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_lunar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_solar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_term PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_week PASSED tests/test_mixed.py::MixedDateTestCase::test_match PASSED tests/test_mixed.py::FuzzyTestCaseTest::test_fuzzy_feature PASSED tests/test_mixed.py::ReverseTestCase::test_solar_february PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_leap_countdown PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_match PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_encode PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_schema_factory PASSED tests/test_new_join.py::OnClauseTestCase::test_build PASSED tests/test_new_join.py::OnClauseTestCase::test_type_hints PASSED tests/test_new_join.py::SelectClauseTestCase::test_build PASSED tests/test_new_join.py::SelectClauseTestCase::test_type_hints PASSED tests/test_new_join.py::JoinOneTestCase::test_callback PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_new_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_new_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_new_join.py::JoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinOneTestCase::test_with_dict PASSED tests/test_percentage.py::PercentTestCase::test_basic_use PASSED tests/test_percentage.py::PercentTestCase::test_custom_places PASSED tests/test_percentage.py::PercentTestCase::test_zero_total PASSED tests/test_proxy.py::ProxyTestCase::test_proxy PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_multiple_tags PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_one_hit PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_with PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_func PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_serial_generator PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_error_base PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_hex_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_string_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_upper_edge_value PASSED tests/test_serial_pool.py::SerialValueGeneratorTestCase::test_value_generator PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_basic PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_hex_value PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_invalid_opts PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_basic_generate PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_custom_label_fmt PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_data_manage PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_elements_source PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_error_create PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_success_create PASSED tests/test_singleton.py::test_singleton PASSED tests/test_string_convert.py::StringConvertTestCase::test_all PASSED tests/test_string_convert.py::PercentageStringTestCase::test_convert PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_rotate PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_with_one_datetime PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_forward_reference PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_parse_extra PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_pll2cnl PASSED tests/test_utils.py::BaseTestCase::test_chain PASSED tests/test_utils.py::BaseTestCase::test_force_iterable PASSED tests/test_utils.py::BaseTestCase::test_item_cycle PASSED tests/test_utils.py::BaseTestCase::test_item_cycle2 PASSED tests/test_utils.py::StringTrimTestCase::test_trim_list PASSED tests/test_utils.py::FirstofTestCase::test_first_of PASSED tests/test_utils.py::ForceListTestCase::test_force_list ============================= 128 passed in 0.23s ==============================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites name="pytest tests"><testsuite name="pytest" errors="0" failures="0" skipped="0" tests="139" time="0.226" timestamp="2026-11-14T03:47:34.253834+00:00" hostname="397ebe7a692d"><testcase classname="tests.test_birthday.NominalAgeTestCase" name="test_nominal_age" time="0.001" /><testcase classname="tests.test_birthday.ActualAgeTestCase" name="test_nominal_age" time="0.000" /><testcase classname="tests.test_birthday.MixedAgeTestCase" name="test_mixed" time="0.000" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_fist_day_of_week" time="0.003" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_last_day" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number" time="0.001" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_lower_order" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_measure" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_order" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_choices" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_names_and_values_and_labels" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_child_class" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_item_overwrite" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_increase" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance_with_invalid_raw" time="0.000" /><testcase classname="tests.test_dictionary.AttributeDictTestCase" name="test_access" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch_single" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_ifetch_multiple" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_custom_getter" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_fetch.FetchAsDictTestCase" name="test_fetch_as_dict" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_amount_capital" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_decimal" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_valid_range" time="0.000" /><testcase classname="tests.test_htmls.HtmlTagTest" name="test_html_tags" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_join.JoinTestCase" name="test_as_kwargs" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_custom_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_dumps" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_mixed_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_singledispatch" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_delete_attr" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_lazy_object" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_with_kwargs" time="0.000" /><testcase classname="tests.test_lunar_benchmark.BenchmarkTestCase" name="test_edge_dates" time="0.000" /><testcase classname="tests.test_lunar_sqlite3_feature.Sqlite3CustomFieldTestCase" name="test_custom_field" time="0.001" /><testcase classname="tests.test_lunardate.TextUtilsTestCase" name="test_cn_day_text" time="0.001" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_comparison" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_convert_datetime" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_specific_dates" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_immutable_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_new_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_solar_and_lunar" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_term_ganzhi_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_timedelta" time="0.000" /><testcase classname="tests.test_lunardate.PrivateMethodsTestCase" name="test_year_info" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_cn_calendar_day" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_term" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_valid_format" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_delta" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_leap_check" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_ndays" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_lunar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_solar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_term" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_week" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.FuzzyTestCaseTest" name="test_fuzzy_feature" time="0.000" /><testcase classname="tests.test_mixed.ReverseTestCase" name="test_solar_february" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_leap_countdown" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_encode" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_schema_factory" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_callback" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_new_join.JoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_basic_use" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_custom_places" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_zero_total" time="0.000" /><testcase classname="tests.test_proxy.ProxyTestCase" name="test_proxy" time="0.000" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_multiple_tags" time="0.002" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_one_hit" time="0.001" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_with" time="0.001" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_func" time="0.000" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_serial_generator" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_error_base" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_hex_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_string_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_upper_edge_value" time="0.000" /><testcase classname="tests.test_serial_pool.SerialValueGeneratorTestCase" name="test_value_generator" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_basic" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_hex_value" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_invalid_opts" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_basic_generate" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_custom_label_fmt" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_data_manage" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_elements_source" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_error_create" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_success_create" time="0.000" /><testcase classname="tests.test_singleton" name="test_singleton" time="0.000" /><testcase classname="tests.test_string_convert.StringConvertTestCase" name="test_all" time="0.001" /><testcase classname="tests.test_string_convert.PercentageStringTestCase" name="test_convert" time="0.000" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_rotate" time="0.001" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_with_one_datetime" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_forward_reference" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_parse_extra" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_pll2cnl" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_chain" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_force_iterable" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle2" time="0.001" /><testcase classname="tests.test_utils.StringTrimTestCase" name="test_trim_list" time="0.000" /><testcase classname="tests.test_utils.FirstofTestCase" name="test_first_of" time="0.000" /><testcase classname="tests.test_utils.ForceListTestCase" name="test_force_list" time="0.000" /></testsuite></testsuites>
Agent log Included
[ 0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
[ 0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository kinegratii/borax.
[ 10.1s] 💭 (301 chars) "The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`.
Specifically, for days 20 and 30 of the lun..."
[ 10.1s] 🔧 run_command grep -rn "day_cn" borax/calendars/lunardate.py
[ 10.2s] → 352: def day_cn(day: int) -> str:
[ 17.3s] 💭 (144 chars) "Okay, `TextUtils.day_cn` is on line 352 of `borax/calendars/lunardate.py`.
Let's read the implementation of `day_cn` an..."
[ 17.3s] 📖 read_file (borax/calendars/lunardate.py)
[ 17.3s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': ' ANIMALS =
\'鼠牛虎兔龙蛇马羊猴鸡狗猪\'\n\n @staticme…
[ 29.8s] 💭 (514 chars) "The implementation of `day_cn` is:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(d..."
[ 29.8s] 📖 read_file (borax/calendars/lunardate.py)
[ 29.8s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': ' value_offset = [0,
15]\n year_in…
[ 143.3s] 💭 (2593 chars) "Definitions:
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
Let's trace `day_cn(20)`:
`day = 20`
`a, b = divmod(20, 10)` -> ..."
[ 143.3s] 🔧 run_command (15 lines) python3 - <<'PY'
[ 143.4s] → day_cn(20): 廿十
[ 233.5s] 💭 (3376 chars) "The reproduction confirms the issue.
To fix `day_cn(day)`:
If `day == 20`, return "二十"
If `day == 30`, return "三十"
Oth..."
[ 233.5s] ✏️ edit_file (borax/calendars/lunardate.py)
[ 233.6s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'occurrences': 1, 'strategy': 'exact',
'diff': '--- a/borax…
[ 255.2s] 💭 (80 chars) "Now let's verify the fix with the reproduction script and some additional cases."
[ 255.2s] 🔧 run_command (25 lines) python3 - <<'PY'
[ 255.2s] → day= 1: expected=初一, actual=初一, OK
[ 258.4s] 💭 (103 chars) "All tests passed. Now I should check if there are any existing tests for `LunarDate` that I
should run."
[ 258.4s] 🔧 run_command grep -rn "LunarDate" tests/
[ 258.4s] → tests/test_birthday.py:5:from borax.calendars.lunardate import LunarDate
[ 262.3s] 💭 (55 chars) "`tests/test_lunardate.py` seems relevant. Let's run it."
[ 262.3s] 🔧 run_command pytest tests/test_lunardate.py -q --tb=short --no-header
[ 263.0s] → ................ [100%]
[ 269.0s] 💭 (137 chars) "All tests in `tests/test_lunardate.py` passed.
I should also check if there are any other tests that use `TextUtils.day..."
[ 269.0s] 🔧 run_command (2 lines) grep -rn "day_cn" tests/
[ 269.0s] → tests/test_lunardate.py:102: self.assertEqual('初十', ld2.cn_day)
[ 273.3s] 💭 (80 chars) "Only `tests/test_lunardate.py:102` uses `cn_day`. Let's see what's around there."
[ 273.3s] 📖 read_file (tests/test_lunardate.py)
[ 273.3s] ✓ {'status': 'ok', 'filepath': 'tests/test_lunardate.py', 'content': " self.assertEqual('立秋',
ld.term)\n sel…
[ 276.2s] 💭 (100 chars) "It only tests `初十`.
I'm confident in the fix. Let me double check `git status --short && git diff`."
[ 276.2s] 🔧 run_command git status --short && git diff
[ 276.3s] → M borax/calendars/lunardate.py
[ 298.2s] 💭 (891 chars) "The diff looks correct.
One final check on the logic for `day_cn`:
- `day=10`: `a=1, b=0`. `b==0` True. `a>=2` False. `..."
[ 298.2s] 🤖 submit_patch
[ 298.3s] → submit_patch: {"status": "ok", "patch_size": 581, "files_changed": 1}
[ 305.5s] 💭 (210 chars) "I have fixed the issue where "twenty" and "thirty" in the lunar calendar were incorrectly
returned as "廿十" and "卅十". The..."
[ 305.5s] ✅ Agent finished: The issue was caused by the logic in `TextUtils.day_cn` that produced "廿十" and "卅十"
instead of "二十" and "三十". I modified the logic to explicitly handle days 20 and 30 by returning the appropriate
Chin...
Native result row
{
"agent_error": null,
"duration_seconds": 309.28,
"error": null,
"grade": {
"collected_tests": 128,
"competition_junit_ok": true,
"error": null,
"required_issues_count": 0,
"resolved": true,
"status_counts": {
"PASSED": 128
},
"strict_clean_patch": true,
"test_exit_code": 0
},
"instance_id": "kinegratii__borax-23",
"pass_idx": 0,
"patch_chars": 581,
"phase1_seconds": 308.1,
"repo": "kinegratii/borax",
"request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/kinegratii__borax-23__p0__r1.jsonl",
"resolved": true,
"rollout_idx": 1,
"run_key": "kinegratii__borax-23__p0__r1",
"strict_clean_patch": true,
"tool_calls": 11,
"total_llm_calls": 13,
"trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_kinegratii__borax-23__p0__r1.json"
}