ROLLOUT 4 · kinegratii/borax
kinegratii__borax-23
Solved
321 stotal time
15tool calls
17model calls
5,563tokens generated
172,098prompt tokens read
No error recorded
⚠ The request log has 16 model calls but the trace has 18 agent calls, so tokens are listed separately instead of beside each turn.
Turn by turn
Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.
System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`. Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run. ## Critical Environment & Grader Rules 1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`. 2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files. 3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`. 4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks: `pytest path/to/test_file.py -k pattern -q --tb=short --no-header` If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off. 5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission. ## Execution Protocol ### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls) - The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories. - Run a single compound `run_command` with `grep -rn --include="*.py"` to locate: (a) the exact symbols, error strings, or functions from the problem description, (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and (c) the closest existing unit test files under `tests/`. ### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls) - Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests. - Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types. ### Phase 3 — Reproduce Bug in One Call (1 tool call) - Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts. ### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls) - Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`. - Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests. - **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`. ### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls) - Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`. - Run `git status --short && git diff` via `run_command`. Confirm: - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately), - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched), - Minimal, clean diff with valid imports and indentation. - Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 3,273 characters
You are evaluating a software engineering task for repository kinegratii/borax. Problem Statement: 农历日“二十”“三十”中文名称错误 ## 发现版本 v3.4.0 ## 问题描述 “廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。 ## 代码示例 ```python from borax.calendars.lunardate import LunarDate, TextUtils print(TextUtils.day_cn(20)) # “廿十” ld = LunarDate(2020, 10, 20, 0) print(ld.cn_day) # “廿十” print(ld.cn_day_calendar) # “廿十” print(ld.cn_str()) # “廿十” ``` ## 建议方案 只需要修改 `TextUtils.day_cn` 逻辑即可，其他函数均是调用该函数。 ## Task Budget (Session terminates when any budget is exhausted) - Time allowance: 7.5 minutes - Tool calls allowance: 30 calls - Max loop iterations: 40 turns ## Execution Environment Rules - Single command timeout: 90 seconds (commands exceeding this fail without ending the session) - Command output limit: 5000 characters - File view limit: 150 lines per read_file call - File character limit: 10000 characters per read_file call - Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages. ## Instructions: 0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages. 1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules. 2. Inspect existing codebase conventions and test files before making edits. 3. Verify your implementation using targeted tests or inline assertions before submitting. 4. Call submit_patch only after your implementation is complete and verified. 5. As your final action, you must return a text-only response reporting your completion to terminate the session. ## Workspace Layout The repository is located at `/workspace`. Here is the directory tree (up to 3 levels): ``` ./LICENSE ./MANIFEST.in ./README.md ./borax ./borax/__init__.py ./borax/calendars ./borax/calendars/FestivalData.txt ./borax/calendars/__init__.py ./borax/calendars/birthday.py ./borax/calendars/festivals.py ./borax/calendars/lunardate.py ./borax/calendars/store.py ./borax/calendars/utils.py ./borax/choices.py ./borax/constants.py ./borax/counters ./borax/counters/__init__.py ./borax/counters/daily.py ./borax/counters/serial_pool.py ./borax/counters/serials.py ./borax/datasets ./borax/datasets/__init__.py ./borax/datasets/fetch.py ./borax/datasets/join_.py ./borax/devtools.py ./borax/finance.py ./borax/htmls.py ./borax/numbers.py ./borax/patterns ./borax/patterns/__init__.py ./borax/patterns/lazy.py ./borax/patterns/proxy.py ./borax/patterns/singleton.py ./borax/serialize ./borax/serialize/__init__.py ./borax/serialize/bjson.py ./borax/serialize/cjson.py ./borax/strings.py ./borax/structures ./borax/structures/__init__.py ./borax/structures/dictionary.py ./borax/structures/percentage.py ./borax/structures/tree.py ./borax/system.py ./borax/ui ./borax/ui/__init__.py ./borax/ui/aiotk.py ./borax/ui/widgets.py ./borax/utils.py ./docs ./examples ./long_description.rst ./pyproject.toml ./requirements_dev.txt ./setup.cfg ./setup.py ./tests ./tools ./tools/validate_lunar.py ```
Turn 1at 19 s265 tokens out3,114 prompt tokens
The user is reporting a bug in the `borax.calendars.lunardate` module, specifically in the `TextUtils.day_cn` method. The issue is that for days 20 and 30, it returns "廿十" and "卅十" respectively, which are incorrect. They should be "二十" and "三十". Let's verify this.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\nprint(f\"day_cn(20): {TextUtils.day_cn(20)}\")\nprint(f\"day_cn(30): {TextUtils.day_cn(30)}\")\nld20 = LunarDate(2020, 10, 20, 0)\nprint(f\"ld20.cn_day: {ld20.cn_day}\")\nprint(f\"ld20.cn_day_calendar: {ld20.cn_day_calendar}\")\nprint(f\"ld20.cn_str(): {ld20.cn_str()}\")\nPY\n"
}Result of run_command 246 characters
{
"status": "ok",
"stdout": "day_cn(20): 廿十\nday_cn(30): 卅十\nld20.cn_day: 廿十\nld20.cn_day_calendar: 廿十\nld20.cn_str(): 二〇二〇年十月廿十\n",
"stderr": "",
"exit_code": 0
}Turn 2at 26 s103 tokens out3,489 prompt tokens
The reproduction confirms the issue. `TextUtils.day_cn(20)` returns "廿十" instead of "二十", and `TextUtils.day_cn(30)` returns "卅十" instead of "三十". Now let's find the implementation of `TextUtils.day_cn` in `borax/calendars/lunardate.py`.
TOOL CALL · read_file
{
"filepath": "borax/calendars/lunardate.py"
}Result of read_file 6,039 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": "# coding=utf8\nimport re\nimport datetime\nimport warnings\n\nfrom .store import (\n EncoderMixin, f_year, f_month, f_day, f_leap\n)\n\nfrom typing import Optional, Iterator, Tuple, Union\n\n__all__ = ['LunarDate', 'LCalendars', 'InvalidLunarDateError']\n\n\n# Exception\n\nclass InvalidLunarDateError(ValueError):\n # The InvalidLunarDateError will not be the subclass of ValueError in v4.0.\n pass\n\n\n# Typing\n\nLeap = Union[int, bool]\n\n# Constants\n\nMIN_LUNAR_YEAR = 1900\nMAX_LUNAR_YEAR = 2100\n\nMIN_SOLAR_DATE = datetime.date(1900, 1, 31)\nMAX_SOLAR_DATE = datetime.date(2101, 1, 28)\n\nMAX_OFFSET = 73411 # (MAX_SOLAR_DATE - MIN_SOLAR_DATE).days\n\n\ndef _check_year_range(year):\n if year < MIN_LUNAR_YEAR or year > MAX_LUNAR_YEAR:\n raise InvalidLunarDateError('[year={}]: Year must be in the range [1900, 2100]'.format(year))\n\n\n# lunar year 1900~2100\nYEAR_INFOS = [\n 0x04bd8, 0x04ae0, 0x0a570, 0x054d5, 0x0d260, 0x0d950, 0x16554, 0x056a0, 0x09ad0, 0x055d2, # 1900 - 1909\n 0x04ae0, 0x0a5b6, 0x0a4d0, 0x0d250, 0x1d255, 0x0b540, 0x0d6a0, 0x0ada2, 0x095b0, 0x14977, # 1910 - 1919\n 0x04970, 0x0a4b0, 0x0b4b5, 0x06a50, 0x06d40, 0x1ab54, 0x02b60, 0x09570, 0x052f2, 0x04970, # 1920 - 1929\n 0x06566, 0x0d4a0, 0x0ea50, 0x16a95, 0x05ad0, 0x02b60, 0x186e3, 0x092e0, 0x1c8d7, 0x0c950, # 1930 - 1939\n 0x0d4a0, 0x1d8a6, 0x0b550, 0x056a0, 0x1a5b4, 0x025d0, 0x092d0, 0x0d2b2, 0x0a950, 0x0b557, # 1940 - 1949\n 0x06ca0, 0x0b550, 0x15355, 0x04da0, 0x0a5b0, 0x14573, 0x052b0, 0x0a9a8, 0x0e950, 0x06aa0, # 1950 - 1959\n 0x0aea6, 0x0ab50, 0x04b60, 0x0aae4, 0x0a570, 0x05260, 0x0f263, 0x0d950, 0x05b57, 0x056a0, # 1960 - 1969\n 0x096d0, 0x04dd5, 0x04ad0, 0x0a4d0, 0x0d4d4, 0x0d250, 0x0d558, 0x0b540, 0x0b6a0, 0x195a6, # 1970 - 1979\n 0x095b0, 0x049b0, 0x0a974, 0x0a4b0, 0x0b27a, 0x06a50, 0x06d40, 0x0af46, 0x0ab60, 0x09570, # 1980 - 1989\n 0x04af5, 0x04970, 0x064b0, 0x074a3, 0x0ea50, 0x06b58, 0x05ac0, 0x0ab60, 0x096d5, 0x092e0, # 1990 - 1999\n 0x0c960, 0x0d954, 0x0d4a0, 0x0da50, 0x07552, 0x056a0, 0x0abb7, 0x025d0, 0x092d0, 0x0cab5, # 2000 - 2009\n 0x0a950, 0x0b4a0, 0x0baa4, 0x0ad50, 0x055d9, 0x04ba0, 0x0a5b0, 0x15176, 0x052b0, 0x0a930, # 2010 - 2019\n 0x07954, 0x06aa0, 0x0ad50, 0x05b52, 0x04b60, 0x0a6e6, 0x0a4e0, 0x0d260, 0x0ea65, 0x0d530, # 2020 - 2029\n 0x05aa0, 0x076a3, 0x096d0, 0x04afb, 0x04ad0, 0x0a4d0, 0x1d0b6, 0x0d250, 0x0d520, 0x0dd45, # 2030 - 2039\n 0x0b5a0, 0x056d0, 0x055b2, 0x049b0, 0x0a577, 0x0a4b0, 0x0aa50, 0x1b255, 0x06d20, 0x0ada0, # 2040 - 2049\n 0x14b63, 0x09370, 0x049f8, 0x04970, 0x064b0, 0x168a6, 0x0ea50, 0x06b20, 0x1a6c4, 0x0aae0, # 2050 - 2059\n 0x092e0, 0x0d2e3, 0x0c960, 0x0d557, 0x0d4a0, 0x0da50, 0x05d55, 0x056a0, 0x0a6d0, 0x055d4, # 2060 - 2069\n 0x052d0, 0x0a9b8, 0x0a950, 0x0b4a0, 0x0b6a6, 0x0ad50, 0x055a0, 0x0aba4, 0x0a5b0, 0x052b0, # 2070 - 2079\n 0x0b273, 0x06930, 0x07337, 0x06aa0, 0x0ad50, 0x14b55, 0x04b60, 0x0a570, 0x054e4, 0x0d260, # 2080 - 2089\n 0x0e968, 0x0d520, 0x0daa0, 0x16aa6, 0x056d0, 0x04ae0, 0x0a9d4, 0x0a4d0, 0x0d150, 0x0f252, # 2090 - 2099\n 0x0d520\n]\n\n\ndef _parse_leap(year_info):\n leap_month = year_info % 16\n if leap_month == 0:\n leap_days = 0\n elif leap_month <= 12:\n leap_days = (year_info >> 16) % 2 + 29\n else:\n raise ValueError(\"yearInfo 0x{0:x} mod 16 should in [0, 12]\".format(year_info))\n return leap_month, leap_days\n\n\ndef parse_year_days(year_info):\n \"\"\"Parse year days from a year info.\n \"\"\"\n leap_month, leap_days = _parse_leap(year_info)\n res = leap_days\n for month in range(1, 13):\n res += (year_info >> (16 - month)) % 2 + 29\n return res\n\n\nYEAR_DAYS = [parse_year_days(x) for x in YEAR_INFOS]\n\n\ndef _iter_year_month(year_info):\n \"\"\" Iter the month days in a lunar year.\n \"\"\"\n # info => month, days, leap\n\n leap_month, leap_days = _parse_leap(year_info)\n months = [(i, 0) for i in range(1, 13)]\n if leap_month > 0:\n months.insert(leap_month, (leap_month, 1))\n for month, leap in months:\n if leap:\n days = leap_days\n else:\n days = (year_info >> (16 - month)) % 2 + 29\n yield month, days, leap\n\n\nclass LCalendars:\n \"\"\"A public API for lunar calendar.\n \"\"\"\n\n @staticmethod\n def is_leap_month(year: int, month: int) -> bool:\n warnings.warn('This method is deprecated, use LCalendars.leap_month instead.', DeprecationWarning, stacklevel=2)\n _check_year_range(year)\n return YEAR_INFOS[year - MIN_LUNAR_YEAR] % 16 == month\n\n @staticmethod\n def leap_month(year: int) -> int:\n _check_year_range(year)\n leap_month, _ = _parse_leap(YEAR_INFOS[year - MIN_LUNAR_YEAR])\n return leap_month\n\n @staticmethod\n def iter_year_month(year: int) -> Iterator[Tuple[int, int, int]]:\n _check_year_range(year)\n return _iter_year_month(YEAR_INFOS[year - MIN_LUNAR_YEAR])\n\n @staticmethod\n def ndays(year: int, month: Optional[int] = None, leap: Leap = False) -> int:\n _check_year_range(year)\n if month is None:\n return YEAR_DAYS[year - MIN_LUNAR_YEAR]\n leap = int(bool(leap))\n for _month, _days, _leap in LCalendars.iter_year_month(year):\n if (_month, _leap) == (month, leap):\n return _days\n else:\n raise InvalidLunarDateError('[year={},month={},leap={}]: Invalid month.'.format(year, month, leap))\n\n @staticmethod\n def get_leap_years(month: int = 0) -> tuple:\n res = []\n for yoffset, yinfo in enumerate(YEAR_INFOS):\n leap_month = yinfo % 16\n if leap_month > 0 and (month == 0 or leap_month == month):\n res.append(MIN_LUNAR_YEAR + yoffset)\n return tuple(res)\n",
"start_line": 1,
"end_line": 150,
"total_lines": 679,
"is_truncated": true
}Turn 3at 31 s58 tokens out7,048 prompt tokens
The file is quite large. I need to find `TextUtils.day_cn`. Let me search for it.
TOOL CALL · run_command
{
"command": "grep -rn \"day_cn\" borax/calendars/lunardate.py"
}Result of run_command 158 characters
{
"status": "ok",
"stdout": "352: def day_cn(day: int) -> str:\n445: return '{}'.format(TextUtils.day_cn(self.day))\n",
"stderr": "",
"exit_code": 0
}Turn 4at 36 s60 tokens out7,183 prompt tokens
It's on line 352. Let me read around that area.
TOOL CALL · read_file
{
"end_line": 400,
"filepath": "borax/calendars/lunardate.py",
"start_line": 350
}Result of read_file 1,449 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": "\n @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n\n @staticmethod\n def get_gz_cn(offset: int) -> str:\n \"\"\"Get n-th(0-based) GanZhi\n \"\"\"\n return TextUtils.STEMS[offset % 10] + TextUtils.BRANCHES[offset % 12]\n\n\nclass LunarDate(EncoderMixin):\n fields = [f_year, f_month, f_day, f_leap]\n\n def __init__(self, year: int, month: int, day: int, leap: Leap = False):\n offset = ymdl2offset(year, month, day, leap)\n self._year = year\n self._month = month\n self._day = day\n self._leap = leap\n self._offset = offset\n self._gz_year, self._gz_month, self._gz_day, self._term = self._get_gz_ymd()\n\n @property\n def year(self) -> int:\n return self._year\n\n @property\n def month(self) -> int:\n return self._month\n\n @property\n def day(self) -> int:\n return self._day\n\n @property\n def leap(self) -> bool:\n return self._leap\n\n @property\n def offset(self) -> int:\n return self._offset\n\n @property\n def term(self) -> str:",
"start_line": 350,
"end_line": 400,
"total_lines": 679,
"is_truncated": false
}Turn 5at 41 s68 tokens out7,788 prompt tokens
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand why it's producing "廿十" and "卅十".
TOOL CALL · run_command
{
"command": "grep -rn \"TENS = \" borax/calendars/lunardate.py"
}Result of run_command 103 characters
{
"status": "ok",
"stdout": "335: TENS = '初十廿卅'\n",
"stderr": "",
"exit_code": 0
}Turn 6at 45 s42 tokens out7,910 prompt tokens
And `DAYS_CN`.
TOOL CALL · run_command
{
"command": "grep -rn \"DAYS_CN = \" borax/calendars/lunardate.py"
}Result of run_command 148 characters
{
"status": "ok",
"stdout": "336: DAYS_CN = '日一二三四五六七八九十'\n",
"stderr": "",
"exit_code": 0
}Turn 7at 225 s3,020 tokens out8,013 prompt tokens
Wait, `TENS = '初十廿卅'`.
`TENS[0] = '初'`, `TENS[1] = '十'`, `TENS[2] = '廿'`, `TENS[3] = '卅'`.
And `DAYS_CN = '日一二三四五六七八九十'`.
But wait, `DAYS_CN` is a string.
`DAYS_CN[0] = '日'`
`DAYS_CN[1] = '一'`
...
`DAYS_CN[10] = '十'`
Wait, `TextUtils.DAYS_CN` is a string, so `TextUtils.DAYS_CN[b]` where `b` is 1 to 10 will give the character at that index.
Let's trace `day_cn(20)`:
`day = 20`
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`if b == 0: b = 10; if a == 1: a = 0` -> `b = 10, a = 2`
`return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]` -> `TENS[2] + DAYS_CN[10]` -> `'廿' + '十'` -> `'廿十'`.
The user says this is incorrect and should be "二十".
Wait, "二十" is `TENS[1] + DAYS_CN[10]`? No, `TENS[1]` is '十'.
Actually, for 20, it should be "二十".
If `day = 20`, `a = 2, b = 0`.
If we want "二十", we need `TENS[1]` ('十') and `DAYS_CN[2]` ('二')? No.
Wait, in Chinese lunar date:
1-9: 初一, 初二... (TENS[0] + DAYS_CN[1...9])
10: 初十 (TENS[0] + DAYS_CN[10])
11-19: 十一, 十二... (TENS[1] + DAYS_CN[1...9])
20: 二十 (TENS[1] + DAYS_CN[10])
21-29: 廿一, 廿二... (TENS[2] + DAYS_CN[1...9])
30: 三十 (TENS[1] + DAYS_CN[10])? No, 三十 is `TENS[3]` maybe? But `TENS[3]` is '卅'.
Actually, "二十" and "三十" are usually written as "二十" and "三十", while 21 is "廿一" and 31 (not possible in lunar) etc.
Wait, the user says:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
So:
For day=20: instead of '廿' + '十' (廿十), it should be '二' + '十' (二十).
For day=30: instead of '卅' + '十' (卅十), it should be '三' + '十' (三十).
Let's see how `a` and `b` are used.
`a` is the tens digit, `b` is the units digit.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
For day=20: `a=2, b=10`. `TENS[2]` is '廿', `DAYS_CN[10]` is '十'. Result '廿十'.
For day=30: `a=3, b=10`. `TENS[3]` is '卅', `DAYS_CN[10]` is '十'. Result '卅十'.
If we want "二十", we can use `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十').
But wait, if `b` is 10, we want to avoid using `TENS[a]` if `a` is 2 or 3.
Wait, if `a=1` (for 10-19), `a` becomes 0 and `b` becomes 10 for day=10.
Let's trace day=10:
`day=10` -> `a=1, b=0` -> `b=10, a=0` -> `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> '初十'. Correct.
For day=11:
`day=11` -> `a=1, b=1` -> `TENS[1]` ('十') + `DAYS_CN[1]` ('一') -> '十一'. Correct.
For day=20:
We want '二十'. `DAYS_CN[2]` is '二', `DAYS_CN[10]` is '十'.
For day=30:
We want '三十'. `DAYS_CN[3]` is '三', `DAYS_CN[10]` is '十'.
So when `b == 10` and `a >= 2`, we should use `DAYS_CN[a]` instead of `TENS[a]`.
Let's check `TENS` again: `TENS[0]='初'`, `TENS[1]='十'`, `TENS[2]='廿'`, `TENS[3]='卅'`.
`DAYS_CN` = '日一二三四五六七八九十'
`DAYS_CN[0]='日'`, `DAYS_CN[1]='一'`, `DAYS_CN[2]='二'`, `DAYS_CN[3]='三'`, ..., `DAYS_CN[10]='十'`.
So for day=20, `a=2, b=10`. We want `DAYS_CN[2] + DAYS_CN[10]`.
For day=30, `a=3, b=10`. We want `DAYS_CN[3] + DAYS_CN[10]`.
Is it possible for `a` to be > 3?
Lunar months can be 29 or 30 days. So `a` can be 0, 1, 2, 3.
Let's see the current implementation:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If we change it to:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2:
# For 20 and 30, we use 二十 and 三十
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, if `a=2, b=10`, `TextUtils.DAYS_CN[2]` is '二', `TextUtils.DAYS_CN[10]` is '十'. Result '二十'. Correct.
If `a=3, b=10`, `TextUtils.DAYS_CN[3]` is '三', `TextUtils.DAYS_CN[10]` is '十'. Result '三十'. Correct.
Wait, is there any other case?
For day=10: `a=1, b=0` -> `b=10, a=0`. Result `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> '初十'. Correct.
For day=20: `a=2, b=0` -> `b=10`. `a >= 2` is true. Result `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十') -> '二十'. Correct.
For day=30: `a=3, b=0` -> `b=10`. `a >= 2` is true. Result `DAYS_CN[3]` ('三') + `DAYS_CN[10]` ('十') -> '三十'. Correct.
What about days 21-29?
day=21: `a=2, b=1`. `b == 0` is false. Result `TENS[2]` ('廿') + `DAYS_CN[1]` ('一') -> '廿一'. Correct.
day=29: `a=2, b=9`. `b == 0` is false. Result `TENS[2]` ('廿') + `DAYS_CN[9]` ('九') -> '廿九'. Correct.
What about days 31? (Not possible usually, but let's see).
day=31: `a=3, b=1`. `b == 0` is false. Result `TENS[3]` ('卅') + `DAYS_CN[1]` ('一') -> '卅一'.
So the fix seems to be specifically for `b == 0` and `a >= 2`.
Let me check the `TENS` and `DAYS_CN` one more time.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
If `day=20`, `a=2, b=0`. `b` becomes 10. `a` remains 2.
Current code: `TENS[2] + DAYS_CN[10]` -> '廿' + '十' = '廿十'.
My proposed: `DAYS_CN[2] + DAYS_CN[10]` -> '二' + '十' = '二十'.
Wait, can I just change `TENS`?
If `TENS[2]` was '二', then `day=21` becomes `TENS[2] + DAYS_CN[1]` -> '二' + '一' = '二一'. That's wrong. 21 should be '廿一'.
So I must handle the `b=10` case separately.
Let's refine the implementation.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, `DAYS_CN[b]` is `DAYS_CN[10]` which is '十'.
So `DAYS_CN[a] + DAYS_CN[b]` for `a=2` is `'二' + '十'`. Correct.
Wait, `a=2` for 20, `a=3` for 30.
`DAYS_CN[2]` is '二'.
`DAYS_CN[3]` is '三'.
`DAYS_CN[10]` is '十'.
Actually, we can simplify:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let me check if there are any other variants. The problem says:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
Wait, is "廿" and "卅" used for 20 and 30 alone?
In some contexts, yes.
But for lunar dates, "二十" and "三十" are standard.
Let's check if `TextUtils.TENS` is used anywhere else.
TOOL CALL · run_command
{
"command": "grep -rn \"TENS\\[\" borax/calendars/lunardate.py"
}Result of run_command 121 characters
{
"status": "ok",
"stdout": "358: return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n",
"stderr": "",
"exit_code": 0
}Turn 8at 227 s62 tokens out11,096 prompt tokens
It's only used in `day_cn`. Let's double check `TextUtils.DAYS_CN` usage.
TOOL CALL · run_command
{
"command": "grep -rn \"DAYS_CN\\[\" borax/calendars/lunardate.py"
}Result of run_command 121 characters
{
"status": "ok",
"stdout": "358: return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n",
"stderr": "",
"exit_code": 0
}Turn 9at 234 s77 tokens out11,221 prompt tokens
Only in `day_cn`. (Note: `TENS` and `DAYS_CN` are defined as class attributes of `TextUtils`). Wait, I should check where `TextUtils` is defined.
TOOL CALL · run_command
{
"command": "grep -rn \"class TextUtils\" borax/calendars/lunardate.py"
}Result of run_command 82 characters
{
"status": "ok",
"stdout": "333:class TextUtils:\n",
"stderr": "",
"exit_code": 0
}Turn 10at 237 s52 tokens out11,345 prompt tokens
Let me read the `TextUtils` class.
TOOL CALL · read_file
{
"end_line": 350,
"filepath": "borax/calendars/lunardate.py",
"start_line": 330
}Result of read_file 968 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": "# ------ Stems and Branches ------\n\n\nclass TextUtils:\n MONTHS_CN = '〇正二三四五六七八九十冬腊'\n TENS = '初十廿卅'\n DAYS_CN = '日一二三四五六七八九十'\n\n STEMS = '甲乙丙丁戊己庚辛壬癸'\n BRANCHES = '子丑寅卯辰巳午未申酉戌亥'\n ANIMALS = '鼠牛虎兔龙蛇马羊猴鸡狗猪'\n\n @staticmethod\n def year_cn(year: int) -> str:\n s = ''.join([TextUtils.MONTHS_CN[int(c)] for c in str(year)])\n return s.replace('正', '一')\n\n @staticmethod\n def month_cn(month: int) -> str:\n return TextUtils.MONTHS_CN[month]\n",
"start_line": 330,
"end_line": 350,
"total_lines": 679,
"is_truncated": false
}Turn 11at 282 s1,099 tokens out11,696 prompt tokens
Okay, now I will apply the fix.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, let me double check `TextUtils.DAYS_CN[a]`.
`DAYS_CN = '日一二三四五六七八九十'`
`DAYS_CN[0] = '日'`
`DAYS_CN[1] = '一'`
`DAYS_CN[2] = '二'`
`DAYS_CN[3] = '三'`
If `day=20`, `a=2, b=0`. `b` becomes 10. `a >= 2` is true. Return `DAYS_CN[2] + DAYS_CN[10]` -> '二' + '十' = '二十'. Correct.
If `day=30`, `a=3, b=0`. `b` becomes 10. `a >= 2` is true. Return `DAYS_CN[3] + DAYS_CN[10]` -> '三' + '十' = '三十'. Correct.
Is it possible for `day` to be 0? The `LunarDate` likely doesn't allow it, but `day_cn` is a static method.
If `day=0`, `a=0, b=0`. `b` becomes 10. `a=0`. Returns `TENS[0] + DAYS_CN[10]` -> '初十'. (Wait, 0 is not a valid day, starts from 1).
If `day=10`, `a=1, b=0`. `b=10, a=0`. Returns `TENS[0] + DAYS_CN[10]` -> '初十'. Correct.
What if I just do this:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Yes, this looks solid.
Wait, I can also write it more concisely:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: a = 0
if a >= 2: return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let me try to use `edit_file`.
TOOL CALL · edit_file
{
"filepath": "borax/calendars/lunardate.py",
"new_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n elif a >= 2: # 20, 30\n return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]",
"old_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]"
}Result of edit_file 491 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"occurrences": 1,
"strategy": "exact",
"diff": "--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -355,6 +355,8 @@\n b = 10\n if a == 1: # 10\n a = 0\n+ elif a >= 2: # 20, 30\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"is_truncated": false
}Turn 12at 293 s299 tokens out13,005 prompt tokens
Now I verify the fix with the reproduction script.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\nprint(f\"day_cn(20): {TextUtils.day_cn(20)}\")\nprint(f\"day_cn(30): {TextUtils.day_cn(30)}\")\nprint(f\"day_cn(10): {TextUtils.day_cn(10)}\")\nprint(f\"day_cn(21): {TextUtils.day_cn(21)}\")\nprint(f\"day_cn(29): {TextUtils.day_cn(29)}\")\nprint(f\"day_cn(1): {TextUtils.day_cn(1)}\")\nprint(f\"day_cn(11): {TextUtils.day_cn(11)}\")\n\nld20 = LunarDate(2020, 10, 20, 0)\nprint(f\"ld20.cn_day: {ld20.cn_day}\")\nprint(f\"ld20.cn_day_calendar: {ld20.cn_day_calendar}\")\nprint(f\"ld20.cn_str(): {ld20.cn_str()}\")\nPY\n"
}Result of run_command 375 characters
{
"status": "ok",
"stdout": "day_cn(20): 二十\nday_cn(30): 三十\nday_cn(10): 初十\nday_cn(21): 廿一\nday_cn(29): 廿九\nday_cn(1): 初一\nday_cn(11): 十一\nld20.cn_day: 二十\nld20.cn_day_calendar: 二十\nld20.cn_str(): 二〇二〇年十月二十\n",
"stderr": "",
"exit_code": 0
}Turn 13at 304 s150 tokens out13,464 prompt tokens
The results look correct. - 20 -> 二十 (Fixed) - 30 -> 三十 (Fixed) - 10 -> 初十 (Correct) - 21 -> 廿一 (Correct) - 29 -> 廿九 (Correct) - 1 -> 初一 (Correct) - 11 -> 十一 (Correct) And `LunarDate` properties also use `day_cn` and are now fixed. Let's check if there are any other tests in `tests/` that might be related to lunar dates.
TOOL CALL · run_command
{
"command": "find tests -name \"*lunar*\""
}Result of run_command 153 characters
{
"status": "ok",
"stdout": "tests/test_lunar_benchmark.py\ntests/test_lunardate.py\ntests/test_lunar_sqlite3_feature.py\n",
"stderr": "",
"exit_code": 0
}Turn 14at 307 s50 tokens out13,690 prompt tokens
I should run `tests/test_lunardate.py`.
TOOL CALL · run_command
{
"command": "pytest tests/test_lunardate.py -q --tb=short --no-header"
}Result of run_command 161 characters
{
"status": "ok",
"stdout": "................ [100%]\n16 passed in 0.02s\n",
"stderr": "",
"exit_code": 0
}Turn 15at 310 s34 tokens out13,800 prompt tokens
All tests passed. Final check of the changes.
TOOL CALL · run_command
{
"command": "git status --short && git diff"
}Result of run_command 572 characters
{
"status": "ok",
"stdout": " M borax/calendars/lunardate.py\ndiff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py\nindex b7adda7..2adf2fc 100644\n--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -355,6 +355,8 @@ class TextUtils:\n b = 10\n if a == 1: # 10\n a = 0\n+ elif a >= 2: # 20, 30\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"stderr": "",
"exit_code": 0
}Turn 16at 312 s23 tokens out14,087 prompt tokens
The diff is clean and the fix is minimal and precise.
TOOL CALL · submit_patch
Result of submit_patch 55 characters
{
"status": "ok",
"patch_size": 466,
"files_changed": 1
}Turn 17at 318 s101 tokens out14,149 prompt tokens
The fix is ready.
Turn 18at 318 s
The issue was caused by an incorrect implementation of `TextUtils.day_cn` in `borax/calendars/lunardate.py`, which produced "廿十" for 20 and "卅十" for 30. This was corrected by specifically handling cases where the day is 20 or 30 to return "二十" and "三十" instead of using the `TextUtils.TENS` lookup for those specific values.
Model calls (not matched to turns)
Generated tokens 265 tokens · stopped: STOP
The user is reporting a bug in the `borax.calendars.lunardate` module, specifically in the `TextUtils.day_cn` method. The issue is that for days 20 and 30, it returns "廿十" and "卅十" respectively, which are incorrect. They should be "二十" and "三十". Let's verify this.
<|channel>thought
The user is reporting a bug in the `borax.calendars.lunardate` module, specifically in the `TextUtils.day_cn` method.
The issue is that for days 20 and 30, it returns "廿十" and "卅十" respectively, which are incorrect. They should be "二十" and "三十".
Let's verify this.<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
print(f"day_cn(20): {TextUtils.day_cn(20)}")
print(f"day_cn(30): {TextUtils.day_cn(30)}")
ld20 = LunarDate(2020, 10, 20, 0)
print(f"ld20.cn_day: {ld20.cn_day}")
print(f"ld20.cn_day_calendar: {ld20.cn_day_calendar}")
print(f"ld20.cn_str(): {ld20.cn_str()}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 103 tokens · stopped: STOP
The reproduction confirms the issue. `TextUtils.day_cn(20)` returns "廿十" instead of "二十", and `TextUtils.day_cn(30)` returns "卅十" instead of "三十". Now let's find the implementation of `TextUtils.day_cn` in `borax/calendars/lunardate.py`.
The reproduction confirms the issue. `TextUtils.day_cn(20)` returns "廿十" instead of "二十", and `TextUtils.day_cn(30)` returns "卅十" instead of "三十".
Now let's find the implementation of `TextUtils.day_cn` in `borax/calendars/lunardate.py`.<channel|><|tool_call>call:read_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 58 tokens · stopped: STOP
The file is quite large. I need to find `TextUtils.day_cn`. Let me search for it.
The file is quite large. I need to find `TextUtils.day_cn`. Let me search for it.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "day_cn" borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 60 tokens · stopped: STOP
It's on line 352. Let me read around that area.
It's on line 352. Let me read around that area.
<channel|><|tool_call>call:read_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:350,end_line:400}<tool_call|><|tool_response>
Generated tokens 68 tokens · stopped: STOP
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand why it's producing "廿十" and "卅十".
I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand why it's producing "廿十" and "卅十".<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "TENS = " borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 42 tokens · stopped: STOP
And `DAYS_CN`.
And `DAYS_CN`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "DAYS_CN = " borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 3,020 tokens · stopped: STOP
Wait, `TENS = '初十廿卅'`.
`TENS[0] = '初'`, `TENS[1] = '十'`, `TENS[2] = '廿'`, `TENS[3] = '卅'`.
And `DAYS_CN = '日一二三四五六七八九十'`.
But wait, `DAYS_CN` is a string.
`DAYS_CN[0] = '日'`
`DAYS_CN[1] = '一'`
...
`DAYS_CN[10] = '十'`
Wait, `TextUtils.DAYS_CN` is a string, so `TextUtils.DAYS_CN[b]` where `b` is 1 to 10 will give the character at that index.
Let's trace `day_cn(20)`:
`day = 20`
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`if b == 0: b = 10; if a == 1: a = 0` -> `b = 10, a = 2`
`return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]` -> `TENS[2] + DAYS_CN[10]` -> `'廿' + '十'` -> `'廿十'`.
The user says this is incorrect and should be "二十".
Wait, "二十" is `TENS[1] + DAYS_CN[10]`? No, `TENS[1]` is '十'.
Actually, for 20, it should be "二十".
If `day = 20`, `a = 2, b = 0`.
If we want "二十", we need `TENS[1]` ('十') and `DAYS_CN[2]` ('二')? No.
Wait, in Chinese lunar date:
1-9: 初一, 初二... (TENS[0] + DAYS_CN[1...9])
10: 初十 (TENS[0] + DAYS_CN[10])
11-19: 十一, 十二... (TENS[1] + DAYS_CN[1...9])
20: 二十 (TENS[1] + DAYS_CN[10])
21-29: 廿一, 廿二... (TENS[2] + DAYS_CN[1...9])
30: 三十 (TENS[1] + DAYS_CN[10])? No, 三十 is `TENS[3]` maybe? But `TENS[3]` is '卅'.
Actually, "二十" and "三十" are usually written as "二十" and "三十", while 21 is "廿一" and 31 (not possible in lunar) etc.
Wait, the user says:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
So:
For day=20: instead of '廿' + '十' (廿十), it should be '二' + '十' (二十).
For day=30: instead of '卅' + '十' (卅十), it should be '三' + '十' (三十).
Let's see how `a` and `b` are used.
`a` is the tens digit, `b` is the units digit.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
For day=20: `a=2, b=10`. `TENS[2]` is '廿', `DAYS_CN[10]` is '十'. Result '廿十'.
For day=30: `a=3, b=10`. `TENS[3]` is '卅', `DAYS_CN[10]` is '十'. Result '卅十'.
If we want "二十", we can use `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十').
But wait, if `b` is 10, we want to avoid using `TENS[a]` if `a` is 2 or 3.
Wait, if `a=1` (for 10-19), `a` becomes 0 and `b` becomes 10 for day=10.
Let's trace day=10:
`day=10` -> `a=1, b=0` -> `b=10, a=0` -> `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> '初十'. Correct.
For day=11:
`day=11` -> `a=1, b=1` -> `TENS[1]` ('十') + `DAYS_CN[1]` ('一') -> '十一'. Correct.
For day=20:
We want '二十'. `DAYS_CN[2]` is '二', `DAYS_CN[10]` is '十'.
For day=30:
We want '三十'. `DAYS_CN[3]` is '三', `DAYS_CN[10]` is '十'.
So when `b == 10` and `a >= 2`, we should use `DAYS_CN[a]` instead of `TENS[a]`.
Let's check `TENS` again: `TENS[0]='初'`, `TENS[1]='十'`, `TENS[2]='廿'`, `TENS[3]='卅'`.
`DAYS_CN` = '日一二三四五六七八九十'
`DAYS_CN[0]='日'`, `DAYS_CN[1]='一'`, `DAYS_CN[2]='二'`, `DAYS_CN[3]='三'`, ..., `DAYS_CN[10]='十'`.
So for day=20, `a=2, b=10`. We want `DAYS_CN[2] + DAYS_CN[10]`.
For day=30, `a=3, b=10`. We want `DAYS_CN[3] + DAYS_CN[10]`.
Is it possible for `a` to be > 3?
Lunar months can be 29 or 30 days. So `a` can be 0, 1, 2, 3.
Let's see the current implementation:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If we change it to:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2:
# For 20 and 30, we use 二十 and 三十
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, if `a=2, b=10`, `TextUtils.DAYS_CN[2]` is '二', `TextUtils.DAYS_CN[10]` is '十'. Result '二十'. Correct.
If `a=3, b=10`, `TextUtils.DAYS_CN[3]` is '三', `TextUtils.DAYS_CN[10]` is '十'. Result '三十'. Correct.
Wait, is there any other case?
For day=10: `a=1, b=0` -> `b=10, a=0`. Result `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> '初十'. Correct.
For day=20: `a=2, b=0` -> `b=10`. `a >= 2` is true. Result `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十') -> '二十'. Correct.
For day=30: `a=3, b=0` -> `b=10`. `a >= 2` is true. Result `DAYS_CN[3]` ('三') + `DAYS_CN[10]` ('十') -> '三十'. Correct.
What about days 21-29?
day=21: `a=2, b=1`. `b == 0` is false. Result `TENS[2]` ('廿') + `DAYS_CN[1]` ('一') -> '廿一'. Correct.
day=29: `a=2, b=9`. `b == 0` is false. Result `TENS[2]` ('廿') + `DAYS_CN[9]` ('九') -> '廿九'. Correct.
What about days 31? (Not possible usually, but let's see).
day=31: `a=3, b=1`. `b == 0` is false. Result `TENS[3]` ('卅') + `DAYS_CN[1]` ('一') -> '卅一'.
So the fix seems to be specifically for `b == 0` and `a >= 2`.
Let me check the `TENS` and `DAYS_CN` one more time.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
If `day=20`, `a=2, b=0`. `b` becomes 10. `a` remains 2.
Current code: `TENS[2] + DAYS_CN[10]` -> '廿' + '十' = '廿十'.
My proposed: `DAYS_CN[2] + DAYS_CN[10]` -> '二' + '十' = '二十'.
Wait, can I just change `TENS`?
If `TENS[2]` was '二', then `day=21` becomes `TENS[2] + DAYS_CN[1]` -> '二' + '一' = '二一'. That's wrong. 21 should be '廿一'.
So I must handle the `b=10` case separately.
Let's refine the implementation.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, `DAYS_CN[b]` is `DAYS_CN[10]` which is '十'.
So `DAYS_CN[a] + DAYS_CN[b]` for `a=2` is `'二' + '十'`. Correct.
Wait, `a=2` for 20, `a=3` for 30.
`DAYS_CN[2]` is '二'.
`DAYS_CN[3]` is '三'.
`DAYS_CN[10]` is '十'.
Actually, we can simplify:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let me check if there are any other variants. The problem says:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
Wait, is "廿" and "卅" used for 20 and 30 alone?
In some contexts, yes.
But for lunar dates, "二十" and "三十" are standard.
Let's check if `TextUtils.TENS` is used anywhere else.
Wait, `TENS = '初十廿卅'`.
`TENS[0] = '初'`, `TENS[1] = '十'`, `TENS[2] = '廿'`, `TENS[3] = '卅'`.
And `DAYS_CN = '日一二三四五六七八九十'`.
But wait, `DAYS_CN` is a string.
`DAYS_CN[0] = '日'`
`DAYS_CN[1] = '一'`
...
`DAYS_CN[10] = '十'`
Wait, `TextUtils.DAYS_CN` is a string, so `TextUtils.DAYS_CN[b]` where `b` is 1 to 10 will give the character at that index.
Let's trace `day_cn(20)`:
`day = 20`
`a, b = divmod(20, 10)` -> `a = 2, b = 0`
`if b == 0: b = 10; if a == 1: a = 0` -> `b = 10, a = 2`
`return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]` -> `TENS[2] + DAYS_CN[10]` -> `'廿' + '十'` -> `'廿十'`.
The user says this is incorrect and should be "二十".
Wait, "二十" is `TENS[1] + DAYS_CN[10]`? No, `TENS[1]` is '十'.
Actually, for 20, it should be "二十".
If `day = 20`, `a = 2, b = 0`.
If we want "二十", we need `TENS[1]` ('十') and `DAYS_CN[2]` ('二')? No.
Wait, in Chinese lunar date:
1-9: 初一, 初二... (TENS[0] + DAYS_CN[1...9])
10: 初十 (TENS[0] + DAYS_CN[10])
11-19: 十一, 十二... (TENS[1] + DAYS_CN[1...9])
20: 二十 (TENS[1] + DAYS_CN[10])
21-29: 廿一, 廿二... (TENS[2] + DAYS_CN[1...9])
30: 三十 (TENS[1] + DAYS_CN[10])? No, 三十 is `TENS[3]` maybe? But `TENS[3]` is '卅'.
Actually, "二十" and "三十" are usually written as "二十" and "三十", while 21 is "廿一" and 31 (not possible in lunar) etc.
Wait, the user says:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
So:
For day=20: instead of '廿' + '十' (廿十), it should be '二' + '十' (二十).
For day=30: instead of '卅' + '十' (卅十), it should be '三' + '十' (三十).
Let's see how `a` and `b` are used.
`a` is the tens digit, `b` is the units digit.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
For day=20: `a=2, b=10`. `TENS[2]` is '廿', `DAYS_CN[10]` is '十'. Result '廿十'.
For day=30: `a=3, b=10`. `TENS[3]` is '卅', `DAYS_CN[10]` is '十'. Result '卅十'.
If we want "二十", we can use `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十').
But wait, if `b` is 10, we want to avoid using `TENS[a]` if `a` is 2 or 3.
Wait, if `a=1` (for 10-19), `a` becomes 0 and `b` becomes 10 for day=10.
Let's trace day=10:
`day=10` -> `a=1, b=0` -> `b=10, a=0` -> `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> '初十'. Correct.
For day=11:
`day=11` -> `a=1, b=1` -> `TENS[1]` ('十') + `DAYS_CN[1]` ('一') -> '十一'. Correct.
For day=20:
We want '二十'. `DAYS_CN[2]` is '二', `DAYS_CN[10]` is '十'.
For day=30:
We want '三十'. `DAYS_CN[3]` is '三', `DAYS_CN[10]` is '十'.
So when `b == 10` and `a >= 2`, we should use `DAYS_CN[a]` instead of `TENS[a]`.
Let's check `TENS` again: `TENS[0]='初'`, `TENS[1]='十'`, `TENS[2]='廿'`, `TENS[3]='卅'`.
`DAYS_CN` = '日一二三四五六七八九十'
`DAYS_CN[0]='日'`, `DAYS_CN[1]='一'`, `DAYS_CN[2]='二'`, `DAYS_CN[3]='三'`, ..., `DAYS_CN[10]='十'`.
So for day=20, `a=2, b=10`. We want `DAYS_CN[2] + DAYS_CN[10]`.
For day=30, `a=3, b=10`. We want `DAYS_CN[3] + DAYS_CN[10]`.
Is it possible for `a` to be > 3?
Lunar months can be 29 or 30 days. So `a` can be 0, 1, 2, 3.
Let's see the current implementation:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If we change it to:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2:
# For 20 and 30, we use 二十 and 三十
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, if `a=2, b=10`, `TextUtils.DAYS_CN[2]` is '二', `TextUtils.DAYS_CN[10]` is '十'. Result '二十'. Correct.
If `a=3, b=10`, `TextUtils.DAYS_CN[3]` is '三', `TextUtils.DAYS_CN[10]` is '十'. Result '三十'. Correct.
Wait, is there any other case?
For day=10: `a=1, b=0` -> `b=10, a=0`. Result `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> '初十'. Correct.
For day=20: `a=2, b=0` -> `b=10`. `a >= 2` is true. Result `DAYS_CN[2]` ('二') + `DAYS_CN[10]` ('十') -> '二十'. Correct.
For day=30: `a=3, b=0` -> `b=10`. `a >= 2` is true. Result `DAYS_CN[3]` ('三') + `DAYS_CN[10]` ('十') -> '三十'. Correct.
What about days 21-29?
day=21: `a=2, b=1`. `b == 0` is false. Result `TENS[2]` ('廿') + `DAYS_CN[1]` ('一') -> '廿一'. Correct.
day=29: `a=2, b=9`. `b == 0` is false. Result `TENS[2]` ('廿') + `DAYS_CN[9]` ('九') -> '廿九'. Correct.
What about days 31? (Not possible usually, but let's see).
day=31: `a=3, b=1`. `b == 0` is false. Result `TENS[3]` ('卅') + `DAYS_CN[1]` ('一') -> '卅一'.
So the fix seems to be specifically for `b == 0` and `a >= 2`.
Let me check the `TENS` and `DAYS_CN` one more time.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
If `day=20`, `a=2, b=0`. `b` becomes 10. `a` remains 2.
Current code: `TENS[2] + DAYS_CN[10]` -> '廿' + '十' = '廿十'.
My proposed: `DAYS_CN[2] + DAYS_CN[10]` -> '二' + '十' = '二十'.
Wait, can I just change `TENS`?
If `TENS[2]` was '二', then `day=21` becomes `TENS[2] + DAYS_CN[1]` -> '二' + '一' = '二一'. That's wrong. 21 should be '廿一'.
So I must handle the `b=10` case separately.
Let's refine the implementation.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[b]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, `DAYS_CN[b]` is `DAYS_CN[10]` which is '十'.
So `DAYS_CN[a] + DAYS_CN[b]` for `a=2` is `'二' + '十'`. Correct.
Wait, `a=2` for 20, `a=3` for 30.
`DAYS_CN[2]` is '二'.
`DAYS_CN[3]` is '三'.
`DAYS_CN[10]` is '十'.
Actually, we can simplify:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let me check if there are any other variants. The problem says:
“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。
Wait, is "廿" and "卅" used for 20 and 30 alone?
In some contexts, yes.
But for lunar dates, "二十" and "三十" are standard.
Let's check if `TextUtils.TENS` is used anywhere else.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "TENS\[" borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 62 tokens · stopped: STOP
It's only used in `day_cn`. Let's double check `TextUtils.DAYS_CN` usage.
It's only used in `day_cn`.
Let's double check `TextUtils.DAYS_CN` usage.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "DAYS_CN\[" borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 77 tokens · stopped: STOP
Only in `day_cn`. (Note: `TENS` and `DAYS_CN` are defined as class attributes of `TextUtils`). Wait, I should check where `TextUtils` is defined.
Only in `day_cn`. (Note: `TENS` and `DAYS_CN` are defined as class attributes of `TextUtils`).
Wait, I should check where `TextUtils` is defined.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "class TextUtils" borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Generated tokens 52 tokens · stopped: STOP
Let me read the `TextUtils` class.
Let me read the `TextUtils` class.
<channel|><|tool_call>call:read_file{end_line:350,filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:330}<tool_call|><|tool_response>
Generated tokens 1,099 tokens · stopped: STOP
Okay, now I will apply the fix.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, let me double check `TextUtils.DAYS_CN[a]`.
`DAYS_CN = '日一二三四五六七八九十'`
`DAYS_CN[0] = '日'`
`DAYS_CN[1] = '一'`
`DAYS_CN[2] = '二'`
`DAYS_CN[3] = '三'`
If `day=20`, `a=2, b=0`. `b` becomes 10. `a >= 2` is true. Return `DAYS_CN[2] + DAYS_CN[10]` -> '二' + '十' = '二十'. Correct.
If `day=30`, `a=3, b=0`. `b` becomes 10. `a >= 2` is true. Return `DAYS_CN[3] + DAYS_CN[10]` -> '三' + '十' = '三十'. Correct.
Is it possible for `day` to be 0? The `LunarDate` likely doesn't allow it, but `day_cn` is a static method.
If `day=0`, `a=0, b=0`. `b` becomes 10. `a=0`. Returns `TENS[0] + DAYS_CN[10]` -> '初十'. (Wait, 0 is not a valid day, starts from 1).
If `day=10`, `a=1, b=0`. `b=10, a=0`. Returns `TENS[0] + DAYS_CN[10]` -> '初十'. Correct.
What if I just do this:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Yes, this looks solid.
Wait, I can also write it more concisely:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: a = 0
if a >= 2: return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let me try to use `edit_file`.
Okay, now I will apply the fix.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, let me double check `TextUtils.DAYS_CN[a]`.
`DAYS_CN = '日一二三四五六七八九十'`
`DAYS_CN[0] = '日'`
`DAYS_CN[1] = '一'`
`DAYS_CN[2] = '二'`
`DAYS_CN[3] = '三'`
If `day=20`, `a=2, b=0`. `b` becomes 10. `a >= 2` is true. Return `DAYS_CN[2] + DAYS_CN[10]` -> '二' + '十' = '二十'. Correct.
If `day=30`, `a=3, b=0`. `b` becomes 10. `a >= 2` is true. Return `DAYS_CN[3] + DAYS_CN[10]` -> '三' + '十' = '三十'. Correct.
Is it possible for `day` to be 0? The `LunarDate` likely doesn't allow it, but `day_cn` is a static method.
If `day=0`, `a=0, b=0`. `b` becomes 10. `a=0`. Returns `TENS[0] + DAYS_CN[10]` -> '初十'. (Wait, 0 is not a valid day, starts from 1).
If `day=10`, `a=1, b=0`. `b=10, a=0`. Returns `TENS[0] + DAYS_CN[10]` -> '初十'. Correct.
What if I just do this:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Yes, this looks solid.
Wait, I can also write it more concisely:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: a = 0
if a >= 2: return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let me try to use `edit_file`.
<channel|><|tool_call>call:edit_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,new_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
elif a >= 2: # 20, 30
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]<|"|>,old_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]<|"|>}<tool_call|><|tool_response>
Generated tokens 299 tokens · stopped: STOP
Now I verify the fix with the reproduction script.
Now I verify the fix with the reproduction script.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
print(f"day_cn(20): {TextUtils.day_cn(20)}")
print(f"day_cn(30): {TextUtils.day_cn(30)}")
print(f"day_cn(10): {TextUtils.day_cn(10)}")
print(f"day_cn(21): {TextUtils.day_cn(21)}")
print(f"day_cn(29): {TextUtils.day_cn(29)}")
print(f"day_cn(1): {TextUtils.day_cn(1)}")
print(f"day_cn(11): {TextUtils.day_cn(11)}")
ld20 = LunarDate(2020, 10, 20, 0)
print(f"ld20.cn_day: {ld20.cn_day}")
print(f"ld20.cn_day_calendar: {ld20.cn_day_calendar}")
print(f"ld20.cn_str(): {ld20.cn_str()}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 150 tokens · stopped: STOP
The results look correct. - 20 -> 二十 (Fixed) - 30 -> 三十 (Fixed) - 10 -> 初十 (Correct) - 21 -> 廿一 (Correct) - 29 -> 廿九 (Correct) - 1 -> 初一 (Correct) - 11 -> 十一 (Correct) And `LunarDate` properties also use `day_cn` and are now fixed. Let's check if there are any other tests in `tests/` that might be related to lunar dates.
The results look correct.
- 20 -> 二十 (Fixed)
- 30 -> 三十 (Fixed)
- 10 -> 初十 (Correct)
- 21 -> 廿一 (Correct)
- 29 -> 廿九 (Correct)
- 1 -> 初一 (Correct)
- 11 -> 十一 (Correct)
And `LunarDate` properties also use `day_cn` and are now fixed.
Let's check if there are any other tests in `tests/` that might be related to lunar dates.
<channel|><|tool_call>call:run_command{command:<|"|>find tests -name "*lunar*"<|"|>}<tool_call|><|tool_response>
Generated tokens 50 tokens · stopped: STOP
I should run `tests/test_lunardate.py`.
I should run `tests/test_lunardate.py`.
<channel|><|tool_call>call:run_command{command:<|"|>pytest tests/test_lunardate.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Generated tokens 34 tokens · stopped: STOP
All tests passed. Final check of the changes.
All tests passed.
Final check of the changes.
<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 23 tokens · stopped: STOP
The diff is clean and the fix is minimal and precise.
The diff is clean and the fix is minimal and precise.
<channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>
Patch, tests and logs
Final code change Included
diff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py
index b7adda7..2adf2fc 100644
--- a/borax/calendars/lunardate.py
+++ b/borax/calendars/lunardate.py
@@ -355,6 +355,8 @@ class TextUtils:
b = 10
if a == 1: # 10
a = 0
+ elif a >= 2: # 20, 30
+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
@staticmethod
Test output Included
============================= test session starts ============================== collected 128 items tests/test_birthday.py ... [ 2%] tests/test_calendars.py .. [ 3%] tests/test_chinese_number.py .... [ 7%] tests/test_choices.py ............. [ 17%] tests/test_daily_counter.py ... [ 19%] tests/test_dictionary.py . [ 20%] tests/test_fetch.py ...... [ 25%] tests/test_finance.py ... [ 27%] tests/test_htmls.py . [ 28%] tests/test_join.py ..... [ 32%] tests/test_json.py .... [ 35%] tests/test_lazy.py ... [ 37%] tests/test_lunar_benchmark.py . [ 38%] tests/test_lunar_sqlite3_feature.py . [ 39%] tests/test_lunardate.py ................. [ 52%] tests/test_mixed.py ........... [ 60%] tests/test_new_join.py ............ [ 70%] tests/test_percentage.py ... [ 72%] tests/test_proxy.py . [ 73%] tests/test_runtime_measurer.py ... [ 75%] tests/test_serial_generattor.py ...... [ 80%] tests/test_serial_pool.py .......... [ 88%] tests/test_singleton.py . [ 89%] tests/test_string_convert.py .... [ 92%] tests/test_tree_fetcher.py ... [ 94%] tests/test_utils.py ....... [100%] ==================================== PASSES ==================================== - generated xml file: /tmp/rebench-grade-1cef15178d054022abeb019064120ac9.xml -- =========================== short test summary info ============================ PASSED tests/test_birthday.py::NominalAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::ActualAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::MixedAgeTestCase::test_mixed PASSED tests/test_calendars.py::LastDayTestCase::test_fist_day_of_week PASSED tests/test_calendars.py::LastDayTestCase::test_last_day PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_lower_order PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_measure PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_order PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_display PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_value PASSED tests/test_choices.py::FieldChoiceTestCase::test_is_valid PASSED tests/test_choices.py::ChoicesItemTestCase::test_choices PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_display PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_names_and_values_and_labels PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_value PASSED tests/test_choices.py::ChoicesItemTestCase::test_is_valid PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_display PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_value PASSED tests/test_choices.py::OffsetChoicesTestCase::test_is_valid PASSED tests/test_choices.py::DirectionChoicesTestCase::test_child_class PASSED tests/test_choices.py::DirectionChoicesTestCase::test_item_overwrite PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_increase PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance_with_invalid_raw PASSED tests/test_dictionary.py::AttributeDictTestCase::test_access PASSED tests/test_fetch.py::FetchTestCase::test_fetch PASSED tests/test_fetch.py::FetchTestCase::test_fetch_single PASSED tests/test_fetch.py::FetchTestCase::test_ifetch_multiple PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_custom_getter PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_with_dict PASSED tests/test_fetch.py::FetchAsDictTestCase::test_fetch_as_dict PASSED tests/test_finance.py::CapitalNumber::test_amount_capital PASSED tests/test_finance.py::CapitalNumber::test_decimal PASSED tests/test_finance.py::CapitalNumber::test_valid_range PASSED tests/test_htmls.py::HtmlTagTest::test_html_tags PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_join.py::JoinTestCase::test_as_kwargs PASSED tests/test_json.py::CJsonTestCase::test_custom_encoder PASSED tests/test_json.py::CJsonTestCase::test_dumps PASSED tests/test_json.py::CJsonTestCase::test_mixed_encoder PASSED tests/test_json.py::CJsonTestCase::test_singledispatch PASSED tests/test_lazy.py::LazyObjectTestCase::test_delete_attr PASSED tests/test_lazy.py::LazyObjectTestCase::test_lazy_object PASSED tests/test_lazy.py::LazyObjectTestCase::test_with_kwargs PASSED tests/test_lunar_benchmark.py::BenchmarkTestCase::test_edge_dates PASSED tests/test_lunar_sqlite3_feature.py::Sqlite3CustomFieldTestCase::test_custom_field PASSED tests/test_lunardate.py::TextUtilsTestCase::test_cn_day_text PASSED tests/test_lunardate.py::LunarDateTestCase::test_comparison PASSED tests/test_lunardate.py::LunarDateTestCase::test_convert_datetime PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_specific_dates PASSED tests/test_lunardate.py::LunarDateTestCase::test_immutable_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_new_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_solar_and_lunar PASSED tests/test_lunardate.py::LunarDateTestCase::test_term_ganzhi_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_timedelta PASSED tests/test_lunardate.py::PrivateMethodsTestCase::test_year_info PASSED tests/test_lunardate.py::FormatterTestCase::test_cn_calendar_day PASSED tests/test_lunardate.py::FormatterTestCase::test_term PASSED tests/test_lunardate.py::FormatterTestCase::test_valid_format PASSED tests/test_lunardate.py::LCalendarTestCase::test_delta PASSED tests/test_lunardate.py::LCalendarTestCase::test_leap_check PASSED tests/test_lunardate.py::LCalendarTestCase::test_ndays PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_lunar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_solar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_term PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_week PASSED tests/test_mixed.py::MixedDateTestCase::test_match PASSED tests/test_mixed.py::FuzzyTestCaseTest::test_fuzzy_feature PASSED tests/test_mixed.py::ReverseTestCase::test_solar_february PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_leap_countdown PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_match PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_encode PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_schema_factory PASSED tests/test_new_join.py::OnClauseTestCase::test_build PASSED tests/test_new_join.py::OnClauseTestCase::test_type_hints PASSED tests/test_new_join.py::SelectClauseTestCase::test_build PASSED tests/test_new_join.py::SelectClauseTestCase::test_type_hints PASSED tests/test_new_join.py::JoinOneTestCase::test_callback PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_new_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_new_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_new_join.py::JoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinOneTestCase::test_with_dict PASSED tests/test_percentage.py::PercentTestCase::test_basic_use PASSED tests/test_percentage.py::PercentTestCase::test_custom_places PASSED tests/test_percentage.py::PercentTestCase::test_zero_total PASSED tests/test_proxy.py::ProxyTestCase::test_proxy PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_multiple_tags PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_one_hit PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_with PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_func PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_serial_generator PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_error_base PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_hex_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_string_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_upper_edge_value PASSED tests/test_serial_pool.py::SerialValueGeneratorTestCase::test_value_generator PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_basic PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_hex_value PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_invalid_opts PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_basic_generate PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_custom_label_fmt PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_data_manage PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_elements_source PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_error_create PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_success_create PASSED tests/test_singleton.py::test_singleton PASSED tests/test_string_convert.py::StringConvertTestCase::test_all PASSED tests/test_string_convert.py::PercentageStringTestCase::test_convert PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_rotate PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_with_one_datetime PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_forward_reference PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_parse_extra PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_pll2cnl PASSED tests/test_utils.py::BaseTestCase::test_chain PASSED tests/test_utils.py::BaseTestCase::test_force_iterable PASSED tests/test_utils.py::BaseTestCase::test_item_cycle PASSED tests/test_utils.py::BaseTestCase::test_item_cycle2 PASSED tests/test_utils.py::StringTrimTestCase::test_trim_list PASSED tests/test_utils.py::FirstofTestCase::test_first_of PASSED tests/test_utils.py::ForceListTestCase::test_force_list ============================= 128 passed in 0.23s ==============================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites name="pytest tests"><testsuite name="pytest" errors="0" failures="0" skipped="0" tests="139" time="0.225" timestamp="2026-11-14T03:49:22.243129+00:00" hostname="0e5954e2e1f8"><testcase classname="tests.test_birthday.NominalAgeTestCase" name="test_nominal_age" time="0.001" /><testcase classname="tests.test_birthday.ActualAgeTestCase" name="test_nominal_age" time="0.000" /><testcase classname="tests.test_birthday.MixedAgeTestCase" name="test_mixed" time="0.000" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_fist_day_of_week" time="0.003" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_last_day" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number" time="0.001" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_lower_order" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_measure" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_order" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_choices" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_names_and_values_and_labels" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_child_class" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_item_overwrite" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_increase" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance_with_invalid_raw" time="0.000" /><testcase classname="tests.test_dictionary.AttributeDictTestCase" name="test_access" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch_single" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_ifetch_multiple" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_custom_getter" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_fetch.FetchAsDictTestCase" name="test_fetch_as_dict" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_amount_capital" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_decimal" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_valid_range" time="0.000" /><testcase classname="tests.test_htmls.HtmlTagTest" name="test_html_tags" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_join.JoinTestCase" name="test_as_kwargs" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_custom_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_dumps" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_mixed_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_singledispatch" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_delete_attr" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_lazy_object" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_with_kwargs" time="0.000" /><testcase classname="tests.test_lunar_benchmark.BenchmarkTestCase" name="test_edge_dates" time="0.000" /><testcase classname="tests.test_lunar_sqlite3_feature.Sqlite3CustomFieldTestCase" name="test_custom_field" time="0.001" /><testcase classname="tests.test_lunardate.TextUtilsTestCase" name="test_cn_day_text" time="0.001" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_comparison" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_convert_datetime" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_specific_dates" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_immutable_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_new_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_solar_and_lunar" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_term_ganzhi_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_timedelta" time="0.000" /><testcase classname="tests.test_lunardate.PrivateMethodsTestCase" name="test_year_info" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_cn_calendar_day" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_term" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_valid_format" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_delta" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_leap_check" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_ndays" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_lunar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_solar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_term" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_week" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.FuzzyTestCaseTest" name="test_fuzzy_feature" time="0.000" /><testcase classname="tests.test_mixed.ReverseTestCase" name="test_solar_february" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_leap_countdown" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_encode" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_schema_factory" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_callback" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_new_join.JoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_basic_use" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_custom_places" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_zero_total" time="0.000" /><testcase classname="tests.test_proxy.ProxyTestCase" name="test_proxy" time="0.000" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_multiple_tags" time="0.002" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_one_hit" time="0.001" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_with" time="0.001" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_func" time="0.000" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_serial_generator" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_error_base" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_hex_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_string_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_upper_edge_value" time="0.000" /><testcase classname="tests.test_serial_pool.SerialValueGeneratorTestCase" name="test_value_generator" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_basic" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_hex_value" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_invalid_opts" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_basic_generate" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_custom_label_fmt" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_data_manage" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_elements_source" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_error_create" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_success_create" time="0.000" /><testcase classname="tests.test_singleton" name="test_singleton" time="0.000" /><testcase classname="tests.test_string_convert.StringConvertTestCase" name="test_all" time="0.001" /><testcase classname="tests.test_string_convert.PercentageStringTestCase" name="test_convert" time="0.000" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_rotate" time="0.001" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_with_one_datetime" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_forward_reference" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_parse_extra" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_pll2cnl" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_chain" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_force_iterable" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle2" time="0.001" /><testcase classname="tests.test_utils.StringTrimTestCase" name="test_trim_list" time="0.000" /><testcase classname="tests.test_utils.FirstofTestCase" name="test_first_of" time="0.000" /><testcase classname="tests.test_utils.ForceListTestCase" name="test_force_list" time="0.000" /></testsuite></testsuites>
Agent log Included
[ 0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
[ 0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository kinegratii/borax.
[ 18.3s] 💭 (265 chars) "The user is reporting a bug in the `borax.calendars.lunardate` module, specifically in the
`TextUtils.day_cn` method.
Th..."
[ 18.3s] 🔧 run_command (10 lines) python3 - <<'PY'
[ 18.4s] → day_cn(20): 廿十
[ 26.0s] 💭 (238 chars) "The reproduction confirms the issue. `TextUtils.day_cn(20)` returns "廿十" instead of
"二十", and `TextUtils.day_cn(30)` ret..."
[ 26.0s] 📖 read_file (borax/calendars/lunardate.py)
[ 26.1s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': '# coding=utf8\nimport
re\nimport datetime\nimpo…
[ 30.9s] 💭 (81 chars) "The file is quite large. I need to find `TextUtils.day_cn`. Let me search for it."
[ 30.9s] 🔧 run_command grep -rn "day_cn" borax/calendars/lunardate.py
[ 31.0s] → 352: def day_cn(day: int) -> str:
[ 35.6s] 💭 (47 chars) "It's on line 352. Let me read around that area."
[ 35.6s] 📖 read_file (borax/calendars/lunardate.py)
[ 35.7s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': '\n @staticmethod\n def
day_cn(day: int) -…
[ 41.0s] 💭 (102 chars) "I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN` to understand why it's producing
"廿十" and "卅十"."
[ 41.0s] 🔧 run_command grep -rn "TENS = " borax/calendars/lunardate.py
[ 41.1s] → 335: TENS = '初十廿卅'
[ 44.7s] 💭 (14 chars) "And `DAYS_CN`."
[ 44.7s] 🔧 run_command grep -rn "DAYS_CN = " borax/calendars/lunardate.py
[ 44.7s] → 336: DAYS_CN = '日一二三四五六七八九十'
[ 224.1s] 💭 (6324 chars) "Wait, `TENS = '初十廿卅'`.
`TENS[0] = '初'`, `TENS[1] = '十'`, `TENS[2] = '廿'`, `TENS[3] = '卅'`.
And `DAYS_CN = '日一二三四五六七八九十'..."
[ 224.1s] 🔧 run_command grep -rn "TENS[" borax/calendars/lunardate.py
[ 224.1s] → 358: return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
[ 226.8s] 💭 (74 chars) "It's only used in `day_cn`.
Let's double check `TextUtils.DAYS_CN` usage."
[ 226.8s] 🔧 run_command grep -rn "DAYS_CN[" borax/calendars/lunardate.py
[ 226.9s] → 358: return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
[ 233.9s] 💭 (146 chars) "Only in `day_cn`. (Note: `TENS` and `DAYS_CN` are defined as class attributes of
`TextUtils`).
Wait, I should check whe..."
[ 233.9s] 🔧 run_command grep -rn "class TextUtils" borax/calendars/lunardate.py
[ 234.0s] → 333:class TextUtils:
[ 236.9s] 💭 (34 chars) "Let me read the `TextUtils` class."
[ 236.9s] 📖 read_file (borax/calendars/lunardate.py)
[ 237.0s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': "# ------ Stems and Branches
------\n\n\nclass T…
[ 281.9s] 💭 (1903 chars) "Okay, now I will apply the fix.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day,..."
[ 281.9s] ✏️ edit_file (borax/calendars/lunardate.py)
[ 282.1s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'occurrences': 1, 'strategy': 'exact',
'diff': '--- a/borax…
[ 292.8s] 💭 (50 chars) "Now I verify the fix with the reproduction script."
[ 292.8s] 🔧 run_command (16 lines) python3 - <<'PY'
[ 292.8s] → day_cn(20): 二十
[ 303.8s] 💭 (324 chars) "The results look correct.
- 20 -> 二十 (Fixed)
- 30 -> 三十 (Fixed)
- 10 -> 初十 (Correct)
- 21 -> 廿一 (Correct)
- 29 -> 廿九 (Co..."
[ 303.8s] 🔧 run_command find tests -name "*lunar*"
[ 303.8s] → tests/test_lunar_benchmark.py
[ 306.7s] 💭 (39 chars) "I should run `tests/test_lunardate.py`."
[ 306.7s] 🔧 run_command pytest tests/test_lunardate.py -q --tb=short --no-header
[ 307.1s] → ................ [100%]
[ 309.2s] 💭 (46 chars) "All tests passed.
Final check of the changes."
[ 309.2s] 🔧 run_command git status --short && git diff
[ 309.3s] → M borax/calendars/lunardate.py
[ 312.0s] 💭 (53 chars) "The diff is clean and the fix is minimal and precise."
[ 312.0s] 🤖 submit_patch
[ 312.0s] → submit_patch: {"status": "ok", "patch_size": 466, "files_changed": 1}
[ 317.3s] 💭 (17 chars) "The fix is ready."
[ 317.3s] ✅ Agent finished: The issue was caused by an incorrect implementation of `TextUtils.day_cn` in
`borax/calendars/lunardate.py`, which produced "廿十" for 20 and "卅十" for 30. This was corrected by specifically
handling cas...
Native result row
{
"agent_error": null,
"duration_seconds": 321.16,
"error": null,
"grade": {
"collected_tests": 128,
"competition_junit_ok": true,
"error": null,
"required_issues_count": 0,
"resolved": true,
"status_counts": {
"PASSED": 128
},
"strict_clean_patch": true,
"test_exit_code": 0
},
"instance_id": "kinegratii__borax-23",
"pass_idx": 0,
"patch_chars": 466,
"phase1_seconds": 320.02,
"repo": "kinegratii/borax",
"request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/kinegratii__borax-23__p0__r4.jsonl",
"resolved": true,
"rollout_idx": 4,
"run_key": "kinegratii__borax-23__p0__r4",
"strict_clean_patch": true,
"tool_calls": 15,
"total_llm_calls": 17,
"trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_kinegratii__borax-23__p0__r4.json"
}