ROLLOUT 0 · kinegratii/borax
kinegratii__borax-23
Solved
454 stotal time
12tool calls
13model calls
7,586tokens generated
117,391prompt tokens read
Agent exceeded session timeout (7.5 min)
Turn by turn
Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.
System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`. Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run. ## Critical Environment & Grader Rules 1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`. 2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files. 3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`. 4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks: `pytest path/to/test_file.py -k pattern -q --tb=short --no-header` If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off. 5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission. ## Execution Protocol ### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls) - The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories. - Run a single compound `run_command` with `grep -rn --include="*.py"` to locate: (a) the exact symbols, error strings, or functions from the problem description, (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and (c) the closest existing unit test files under `tests/`. ### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls) - Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests. - Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types. ### Phase 3 — Reproduce Bug in One Call (1 tool call) - Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts. ### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls) - Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`. - Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests. - **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`. ### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls) - Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`. - Run `git status --short && git diff` via `run_command`. Confirm: - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately), - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched), - Minimal, clean diff with valid imports and indentation. - Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 3,273 characters
You are evaluating a software engineering task for repository kinegratii/borax. Problem Statement: 农历日“二十”“三十”中文名称错误 ## 发现版本 v3.4.0 ## 问题描述 “廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。 ## 代码示例 ```python from borax.calendars.lunardate import LunarDate, TextUtils print(TextUtils.day_cn(20)) # “廿十” ld = LunarDate(2020, 10, 20, 0) print(ld.cn_day) # “廿十” print(ld.cn_day_calendar) # “廿十” print(ld.cn_str()) # “廿十” ``` ## 建议方案 只需要修改 `TextUtils.day_cn` 逻辑即可，其他函数均是调用该函数。 ## Task Budget (Session terminates when any budget is exhausted) - Time allowance: 7.5 minutes - Tool calls allowance: 30 calls - Max loop iterations: 40 turns ## Execution Environment Rules - Single command timeout: 90 seconds (commands exceeding this fail without ending the session) - Command output limit: 5000 characters - File view limit: 150 lines per read_file call - File character limit: 10000 characters per read_file call - Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages. ## Instructions: 0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages. 1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules. 2. Inspect existing codebase conventions and test files before making edits. 3. Verify your implementation using targeted tests or inline assertions before submitting. 4. Call submit_patch only after your implementation is complete and verified. 5. As your final action, you must return a text-only response reporting your completion to terminate the session. ## Workspace Layout The repository is located at `/workspace`. Here is the directory tree (up to 3 levels): ``` ./LICENSE ./MANIFEST.in ./README.md ./borax ./borax/__init__.py ./borax/calendars ./borax/calendars/FestivalData.txt ./borax/calendars/__init__.py ./borax/calendars/birthday.py ./borax/calendars/festivals.py ./borax/calendars/lunardate.py ./borax/calendars/store.py ./borax/calendars/utils.py ./borax/choices.py ./borax/constants.py ./borax/counters ./borax/counters/__init__.py ./borax/counters/daily.py ./borax/counters/serial_pool.py ./borax/counters/serials.py ./borax/datasets ./borax/datasets/__init__.py ./borax/datasets/fetch.py ./borax/datasets/join_.py ./borax/devtools.py ./borax/finance.py ./borax/htmls.py ./borax/numbers.py ./borax/patterns ./borax/patterns/__init__.py ./borax/patterns/lazy.py ./borax/patterns/proxy.py ./borax/patterns/singleton.py ./borax/serialize ./borax/serialize/__init__.py ./borax/serialize/bjson.py ./borax/serialize/cjson.py ./borax/strings.py ./borax/structures ./borax/structures/__init__.py ./borax/structures/dictionary.py ./borax/structures/percentage.py ./borax/structures/tree.py ./borax/system.py ./borax/ui ./borax/ui/__init__.py ./borax/ui/aiotk.py ./borax/ui/widgets.py ./borax/utils.py ./docs ./examples ./long_description.rst ./pyproject.toml ./requirements_dev.txt ./setup.cfg ./setup.py ./tests ./tools ./tools/validate_lunar.py ```
Turn 1at 20 s268 tokens out3,114 prompt tokens
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`. Specifically, for days 20 and 30 of the lunar calendar, the current implementation returns "廿十" and "卅十" instead of "二十" and "三十". According to the problem description: - `TextUtils.day_cn(20)` returns `"廿十"`, should be `"二十"`. - `TextUtils.day_cn(30)` returns `"卅十"`, should be `"三十"`. I need to find the `TextUtils.day_cn` method in `borax/calendars/lunardate.py` and fix it. Plan: 1. Locate `TextUtils.day_cn` in `borax/calendars/lunardate.py`. 2. Reproduce the bug with a small script. 3. Fix the logic in `TextUtils.day_cn`. 4. Verify the fix. Let's start by locating and reading the code.
TOOL CALL · run_command
{
"command": "grep -rn --include=\"*.py\" \"def day_cn\" borax/calendars/lunardate.py"
}Result of run_command 98 characters
{
"status": "ok",
"stdout": "352: def day_cn(day: int) -> str:\n",
"stderr": "",
"exit_code": 0
}Generated tokens 268 tokens · stopped: STOP
<|channel>thought
The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`.
Specifically, for days 20 and 30 of the lunar calendar, the current implementation returns "廿十" and "卅十" instead of "二十" and "三十".
According to the problem description:
- `TextUtils.day_cn(20)` returns `"廿十"`, should be `"二十"`.
- `TextUtils.day_cn(30)` returns `"卅十"`, should be `"三十"`.
I need to find the `TextUtils.day_cn` method in `borax/calendars/lunardate.py` and fix it.
Plan:
1. Locate `TextUtils.day_cn` in `borax/calendars/lunardate.py`.
2. Reproduce the bug with a small script.
3. Fix the logic in `TextUtils.day_cn`.
4. Verify the fix.
Let's start by locating and reading the code.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "def day_cn" borax/calendars/lunardate.py<|"|>}<tool_call|><tool_call|><|tool_response>
Turn 2at 26 s80 tokens out3,438 prompt tokens
Okay, `day_cn` is at line 352 of `borax/calendars/lunardate.py`. Now let's read the function implementation.
TOOL CALL · read_file
{
"end_line": 370,
"filepath": "borax/calendars/lunardate.py",
"start_line": 340
}Result of read_file 1,126 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": " ANIMALS = '鼠牛虎兔龙蛇马羊猴鸡狗猪'\n\n @staticmethod\n def year_cn(year: int) -> str:\n s = ''.join([TextUtils.MONTHS_CN[int(c)] for c in str(year)])\n return s.replace('正', '一')\n\n @staticmethod\n def month_cn(month: int) -> str:\n return TextUtils.MONTHS_CN[month]\n\n @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n\n @staticmethod\n def get_gz_cn(offset: int) -> str:\n \"\"\"Get n-th(0-based) GanZhi\n \"\"\"\n return TextUtils.STEMS[offset % 10] + TextUtils.BRANCHES[offset % 12]\n\n\nclass LunarDate(EncoderMixin):\n fields = [f_year, f_month, f_day, f_leap]\n\n def __init__(self, year: int, month: int, day: int, leap: Leap = False):",
"start_line": 340,
"end_line": 370,
"total_lines": 679,
"is_truncated": false
}Generated tokens 80 tokens · stopped: STOP
Okay, `day_cn` is at line 352 of `borax/calendars/lunardate.py`. Now let's read the function implementation.
<channel|><|tool_call>call:read_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:340,end_line:370}<tool_call|><|tool_response>
Turn 3at 35 s190 tokens out3,950 prompt tokens
I see the implementation of `day_cn`:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN`. They should be defined earlier in the `TextUtils` class.
TOOL CALL · read_file
{
"end_line": 350,
"filepath": "borax/calendars/lunardate.py",
"start_line": 330
}Result of read_file 968 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": "# ------ Stems and Branches ------\n\n\nclass TextUtils:\n MONTHS_CN = '〇正二三四五六七八九十冬腊'\n TENS = '初十廿卅'\n DAYS_CN = '日一二三四五六七八九十'\n\n STEMS = '甲乙丙丁戊己庚辛壬癸'\n BRANCHES = '子丑寅卯辰巳午未申酉戌亥'\n ANIMALS = '鼠牛虎兔龙蛇马羊猴鸡狗猪'\n\n @staticmethod\n def year_cn(year: int) -> str:\n s = ''.join([TextUtils.MONTHS_CN[int(c)] for c in str(year)])\n return s.replace('正', '一')\n\n @staticmethod\n def month_cn(month: int) -> str:\n return TextUtils.MONTHS_CN[month]\n",
"start_line": 330,
"end_line": 350,
"total_lines": 679,
"is_truncated": false
}Generated tokens 190 tokens · stopped: STOP
I see the implementation of `day_cn`:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, I need to see `TextUtils.TENS` and `TextUtils.DAYS_CN`. They should be defined earlier in the `TextUtils` class.
<channel|><|tool_call>call:read_file{end_line:350,filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:330}<tool_call|><|tool_response>
Turn 4at 231 s2,782 tokens out4,439 prompt tokens
Here are the constants:
`TENS = '初十廿卅'` (Indices: 0: 초(初), 1: 十, 2: 廿, 3: 卅)
`DAYS_CN = '日一二三四五六七八九十'` (Indices: 0: 日, 1: 一, ..., 10: 十)
Let's trace `day_cn(20)`:
1. `day = 20`
2. `a, b = divmod(20, 10)` -> `a=2, b=0`
3. `b == 0` is True:
- `b = 10`
- `a == 1` is False (a=2)
4. `TextUtils.TENS[2]` is `'廿'`
5. `TextUtils.DAYS_CN[10]` is `'十'`
6. Result: `'廿十'`
Similarly for `day_cn(30)`:
1. `day = 30`
2. `a, b = divmod(30, 10)` -> `a=3, b=0`
3. `b == 0` is True:
- `b = 10`
- `a == 1` is False (a=3)
4. `TextUtils.TENS[3]` is `'卅'`
5. `TextUtils.DAYS_CN[10]` is `'十'`
6. Result: `'卅十'`
And for `day_cn(10)`:
1. `day = 10`
2. `a, b = divmod(10, 10)` -> `a=1, b=0`
3. `b == 0` is True:
- `b = 10`
- `a == 1` is True:
- `a = 0`
4. `TextUtils.TENS[0]` is `'初'`
5. `TextUtils.DAYS_CN[10]` is `'十'`
6. Result: `'初十'` (Wait, is '初十' correct for 10? Yes, usually. But for 20 it should be '二十' and for 30 '三十').
Actually, the problem says "廿十" and "卅十" are incorrect, and they should be "二十" and "三十".
Wait, if `day` is 20:
`a=2`, `b=0`.
The current logic makes it `a=2, b=10`, resulting in `TENS[2] + DAYS_CN[10]` = `廿 + 十` = `廿十`.
If it should be `二十`, then for `day=20`:
`TENS[1]` is `十`.
`DAYS_CN[0]` is `日`? No.
Looking at `TENS = '初十廿卅'`, `TENS[1]` is `'十'`.
Looking at `DAYS_CN = '日一二三四五六七八九十'`, `DAYS_CN[0]` is `'日'`.
If `day=20`, `a=2, b=0`.
If we want `二十`, maybe we want `TENS[1] + DAYS_CN[?]?` No.
Wait, `TENS = '初十廿卅'`.
`TENS[0]` = `初` (for days 1-9)
`TENS[1]` = `十` (for days 10-19)
`TENS[2]` = `廿` (for days 20-29)
`TENS[3]` = `卅` (for days 30+)
Wait, the common way to write these in Chinese:
1-9: 初一, 初二, ... 初九
10: 初十
11-19: 十一, 十二, ... 十九
20: 二十
21-29: 二十一, ... 二十九
30: 三十
So:
- day 1-9: `TENS[0]` ('初') + `DAYS_CN[day]` ('一'...'九')
- day 10: `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> 初十
- day 11-19: `TENS[1]` ('十') + `DAYS_CN[day % 10]` ('一'...'九')
- day 20: `TENS[1]` ('十') + `DAYS_CN[?]?` No, `二十` is not `TENS[1] + ...`
Wait, look at `TENS` again.
`TENS = '初十廿卅'`
Indices:
0: 初
1: 十
2: 廿
3: 卅
If `day=20`, we want `二十`.
`二` is `DAYS_CN[2]`.
`十` is `DAYS_CN[10]`.
So `二十` is `DAYS_CN[2] + DAYS_CN[10]`.
If `day=21`, we want `二十一`.
`二` is `DAYS_CN[2]`.
`十` is `DAYS_CN[10]`.
`一` is `DAYS_CN[1]`.
So `二十一` is `DAYS_CN[2] + DAYS_CN[10] + DAYS_CN[1]`.
WAIT. This means the current `TENS` usage is a bit weird if we want to support "二十" instead of "廿".
If we use "廿" for 20:
20 = 廿 (TENS[2])
21 = 廿一 (TENS[2] + DAYS_CN[1])
But the issue says "廿十" is wrong. The current code does:
`day = 20` -> `a=2, b=0` -> `b=10, a=2` -> `TENS[2] + DAYS_CN[10]` -> `廿 + 十` = `廿十`.
So the current code believes `TENS[2]` (廿) is the prefix for 20-29.
If `day=21`:
`a=2, b=1` -> `TENS[2] + DAYS_CN[1]` -> `廿一`. (This is usually acceptable, but maybe the user wants "二十一"?)
The problem says:
`print(TextUtils.day_cn(20)) # “廿十”`
And "Correct should be '二十'".
And "廿、卅 themselves mean 20, 30".
So if `day=20`, it should be `二十` OR just `廿`. But the user says `二十`.
Wait, "廿、卅 本身就是二十、三十的意思了，正确的应该为'二十'、'三十'"
Actually, if "廿" means "二十", then "廿十" is like "twenty ten".
So if `day=20`, it should be `二十`.
If `day=30`, it should be `三十`.
What about `day=21`?
If `day=21`, `a=2, b=1`, result is `廿一`. Is `廿一` acceptable or should it be `二十一`?
Usually, both are used, but the issue specifically complains about `廿十` and `卅十`.
If the user wants `二十` for 20, and the code produces `廿十`, the simplest fix is to handle the `b == 0` case differently.
Current code:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day=20`: `a=2, b=0` -> `b=10, a=2` -> `TENS[2] + DAYS_CN[10]` -> `廿十`.
If we want `二十`, we need `DAYS_CN[2] + DAYS_CN[10]`.
If `day=30`: `a=3, b=0` -> `b=10, a=3` -> `TENS[3] + DAYS_CN[10]` -> `卅十`.
If we want `三十`, we need `DAYS_CN[3] + DAYS_CN[10]`.
If `day=10`: `a=1, b=0` -> `b=10, a=0` -> `TENS[0] + DAYS_CN[10]` -> `初十`. (This is correct).
So the logic for `b == 0` and `a > 1` needs to change.
If `b == 0` (meaning day is 10, 20, 30):
- if `a == 1` (day=10): return `TENS[0] + DAYS_CN[10]` ('初十')
- if `a == 2` (day=20): return `DAYS_CN[2] + DAYS_CN[10]` ('二十')
- if `a == 3` (day=30): return `DAYS_CN[3] + DAYS_CN[10]` ('三十')
Wait, let's check `DAYS_CN[2]` and `DAYS_CN[3]`.
`DAYS_CN = '日一二三四五六七八九十'`
Index 0: 日
Index 1: 一
Index 2: 二
Index 3: 三
So `DAYS_CN[2]` is `二` and `DAYS_CN[3]` is `三`.
So if `b == 0` and `a > 1`, we should return `DAYS_CN[a] + DAYS_CN[10]`.
What about `day=21`?
`a=2, b=1` -> `TENS[2] + DAYS_CN[1]` -> `廿一`.
Should it be `二十一`?
The issue only mentions `Twenty` and `Thirty`.
"农历日 “二十” “三十” 中文名称错误"
"“廿十”、“卅十” 是不正确的用法... 正确的应该为“二十”、“三十”"
If the user is okay with `廿一` but not `廿十`, then the proposed change is enough.
If they want `二十一`, we'd need to change the prefix for 20-29.
Let's see how other lunar calendars do it. Often `廿` is used for 20-29. `廿一` (21), `廿二` (22), etc.
But `廿十` is definitely weird.
Let's reproduce first.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\nprint(f\"day 20: {TextUtils.day_cn(20)}\")\nprint(f\"day 30: {TextUtils.day_cn(30)}\")\nprint(f\"day 10: {TextUtils.day_cn(10)}\")\nprint(f\"day 21: {TextUtils.day_cn(21)}\")\nprint(f\"day 29: {TextUtils.day_cn(29)}\")\n\nld = LunarDate(2020, 10, 20, 0)\nprint(f\"LunarDate(2020,10,20).cn_day: {ld.cn_day}\")\nprint(f\"LunarDate(2020,10,20).cn_day_calendar: {ld.cn_day_calendar}\")\nprint(f\"LunarDate(2020,10,20).cn_str(): {ld.cn_str()}\")\nPY\n"
}Result of run_command 355 characters
{
"status": "ok",
"stdout": "day 20: 廿十\nday 30: 卅十\nday 10: 初十\nday 21: 廿一\nday 29: 廿九\nLunarDate(2020,10,20).cn_day: 廿十\nLunarDate(2020,10,20).cn_day_calendar: 廿十\nLunarDate(2020,10,20).cn_str(): 二〇二〇年十月廿十\n",
"stderr": "",
"exit_code": 0
}Generated tokens 2,782 tokens · stopped: STOP
Here are the constants:
`TENS = '初十廿卅'` (Indices: 0: 초(初), 1: 十, 2: 廿, 3: 卅)
`DAYS_CN = '日一二三四五六七八九十'` (Indices: 0: 日, 1: 一, ..., 10: 十)
Let's trace `day_cn(20)`:
1. `day = 20`
2. `a, b = divmod(20, 10)` -> `a=2, b=0`
3. `b == 0` is True:
- `b = 10`
- `a == 1` is False (a=2)
4. `TextUtils.TENS[2]` is `'廿'`
5. `TextUtils.DAYS_CN[10]` is `'十'`
6. Result: `'廿十'`
Similarly for `day_cn(30)`:
1. `day = 30`
2. `a, b = divmod(30, 10)` -> `a=3, b=0`
3. `b == 0` is True:
- `b = 10`
- `a == 1` is False (a=3)
4. `TextUtils.TENS[3]` is `'卅'`
5. `TextUtils.DAYS_CN[10]` is `'十'`
6. Result: `'卅十'`
And for `day_cn(10)`:
1. `day = 10`
2. `a, b = divmod(10, 10)` -> `a=1, b=0`
3. `b == 0` is True:
- `b = 10`
- `a == 1` is True:
- `a = 0`
4. `TextUtils.TENS[0]` is `'初'`
5. `TextUtils.DAYS_CN[10]` is `'十'`
6. Result: `'初十'` (Wait, is '初十' correct for 10? Yes, usually. But for 20 it should be '二十' and for 30 '三十').
Actually, the problem says "廿十" and "卅十" are incorrect, and they should be "二十" and "三十".
Wait, if `day` is 20:
`a=2`, `b=0`.
The current logic makes it `a=2, b=10`, resulting in `TENS[2] + DAYS_CN[10]` = `廿 + 十` = `廿十`.
If it should be `二十`, then for `day=20`:
`TENS[1]` is `十`.
`DAYS_CN[0]` is `日`? No.
Looking at `TENS = '初十廿卅'`, `TENS[1]` is `'十'`.
Looking at `DAYS_CN = '日一二三四五六七八九十'`, `DAYS_CN[0]` is `'日'`.
If `day=20`, `a=2, b=0`.
If we want `二十`, maybe we want `TENS[1] + DAYS_CN[?]?` No.
Wait, `TENS = '初十廿卅'`.
`TENS[0]` = `初` (for days 1-9)
`TENS[1]` = `十` (for days 10-19)
`TENS[2]` = `廿` (for days 20-29)
`TENS[3]` = `卅` (for days 30+)
Wait, the common way to write these in Chinese:
1-9: 初一, 初二, ... 初九
10: 初十
11-19: 十一, 十二, ... 十九
20: 二十
21-29: 二十一, ... 二十九
30: 三十
So:
- day 1-9: `TENS[0]` ('初') + `DAYS_CN[day]` ('一'...'九')
- day 10: `TENS[0]` ('初') + `DAYS_CN[10]` ('十') -> 初十
- day 11-19: `TENS[1]` ('十') + `DAYS_CN[day % 10]` ('一'...'九')
- day 20: `TENS[1]` ('十') + `DAYS_CN[?]?` No, `二十` is not `TENS[1] + ...`
Wait, look at `TENS` again.
`TENS = '初十廿卅'`
Indices:
0: 初
1: 十
2: 廿
3: 卅
If `day=20`, we want `二十`.
`二` is `DAYS_CN[2]`.
`十` is `DAYS_CN[10]`.
So `二十` is `DAYS_CN[2] + DAYS_CN[10]`.
If `day=21`, we want `二十一`.
`二` is `DAYS_CN[2]`.
`十` is `DAYS_CN[10]`.
`一` is `DAYS_CN[1]`.
So `二十一` is `DAYS_CN[2] + DAYS_CN[10] + DAYS_CN[1]`.
WAIT. This means the current `TENS` usage is a bit weird if we want to support "二十" instead of "廿".
If we use "廿" for 20:
20 = 廿 (TENS[2])
21 = 廿一 (TENS[2] + DAYS_CN[1])
But the issue says "廿十" is wrong. The current code does:
`day = 20` -> `a=2, b=0` -> `b=10, a=2` -> `TENS[2] + DAYS_CN[10]` -> `廿 + 十` = `廿十`.
So the current code believes `TENS[2]` (廿) is the prefix for 20-29.
If `day=21`:
`a=2, b=1` -> `TENS[2] + DAYS_CN[1]` -> `廿一`. (This is usually acceptable, but maybe the user wants "二十一"?)
The problem says:
`print(TextUtils.day_cn(20)) # “廿十”`
And "Correct should be '二十'".
And "廿、卅 themselves mean 20, 30".
So if `day=20`, it should be `二十` OR just `廿`. But the user says `二十`.
Wait, "廿、卅 本身就是二十、三十的意思了，正确的应该为'二十'、'三十'"
Actually, if "廿" means "二十", then "廿十" is like "twenty ten".
So if `day=20`, it should be `二十`.
If `day=30`, it should be `三十`.
What about `day=21`?
If `day=21`, `a=2, b=1`, result is `廿一`. Is `廿一` acceptable or should it be `二十一`?
Usually, both are used, but the issue specifically complains about `廿十` and `卅十`.
If the user wants `二十` for 20, and the code produces `廿十`, the simplest fix is to handle the `b == 0` case differently.
Current code:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
If `day=20`: `a=2, b=0` -> `b=10, a=2` -> `TENS[2] + DAYS_CN[10]` -> `廿十`.
If we want `二十`, we need `DAYS_CN[2] + DAYS_CN[10]`.
If `day=30`: `a=3, b=0` -> `b=10, a=3` -> `TENS[3] + DAYS_CN[10]` -> `卅十`.
If we want `三十`, we need `DAYS_CN[3] + DAYS_CN[10]`.
If `day=10`: `a=1, b=0` -> `b=10, a=0` -> `TENS[0] + DAYS_CN[10]` -> `初十`. (This is correct).
So the logic for `b == 0` and `a > 1` needs to change.
If `b == 0` (meaning day is 10, 20, 30):
- if `a == 1` (day=10): return `TENS[0] + DAYS_CN[10]` ('初十')
- if `a == 2` (day=20): return `DAYS_CN[2] + DAYS_CN[10]` ('二十')
- if `a == 3` (day=30): return `DAYS_CN[3] + DAYS_CN[10]` ('三十')
Wait, let's check `DAYS_CN[2]` and `DAYS_CN[3]`.
`DAYS_CN = '日一二三四五六七八九十'`
Index 0: 日
Index 1: 一
Index 2: 二
Index 3: 三
So `DAYS_CN[2]` is `二` and `DAYS_CN[3]` is `三`.
So if `b == 0` and `a > 1`, we should return `DAYS_CN[a] + DAYS_CN[10]`.
What about `day=21`?
`a=2, b=1` -> `TENS[2] + DAYS_CN[1]` -> `廿一`.
Should it be `二十一`?
The issue only mentions `Twenty` and `Thirty`.
"农历日 “二十” “三十” 中文名称错误"
"“廿十”、“卅十” 是不正确的用法... 正确的应该为“二十”、“三十”"
If the user is okay with `廿一` but not `廿十`, then the proposed change is enough.
If they want `二十一`, we'd need to change the prefix for 20-29.
Let's see how other lunar calendars do it. Often `廿` is used for 20-29. `廿一` (21), `廿二` (22), etc.
But `廿十` is definitely weird.
Let's reproduce first.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
print(f"day 20: {TextUtils.day_cn(20)}")
print(f"day 30: {TextUtils.day_cn(30)}")
print(f"day 10: {TextUtils.day_cn(10)}")
print(f"day 21: {TextUtils.day_cn(21)}")
print(f"day 29: {TextUtils.day_cn(29)}")
ld = LunarDate(2020, 10, 20, 0)
print(f"LunarDate(2020,10,20).cn_day: {ld.cn_day}")
print(f"LunarDate(2020,10,20).cn_day_calendar: {ld.cn_day_calendar}")
print(f"LunarDate(2020,10,20).cn_str(): {ld.cn_str()}")
PY
<|"|>}<tool_call|><|tool_response>
Turn 5at 382 s2,987 tokens out7,385 prompt tokens
Confirmed. `day 20` is `廿十` and `day 30` is `卅十`.
Now, let's consider if `day 21` should be `二十一` instead of `廿一`.
Usually, `廿` is an abbreviation for `二十`.
Using `廿一` is common.
But `廿十` is definitely wrong.
If I change the logic to:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: # 10
return TextUtils.TENS[0] + TextUtils.DAYS_CN[10] # 初十
elif a == 2: # 20
return TextUtils.DAYS_CN[2] + TextUtils.DAYS_CN[10] # 二十
elif a == 3: # 30
return TextUtils.DAYS_CN[3] + TextUtils.DAYS_CN[10] # 三十
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, for `day=11`: `a=1, b=1` -> `TENS[1] + DAYS_CN[1]` -> `十一`. (Correct)
For `day=21`: `a=2, b=1` -> `TENS[2] + DAYS_CN[1]` -> `廿一`. (Correct/Common)
For `day=31`: `a=3, b=1` -> `TENS[3] + DAYS_CN[1]` -> `卅一`. (Correct/Common)
Let's double check if there's a more elegant way to implement this.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: # 10
a = 0
else: # 20, 30
# Instead of TENS[a] + DAYS_CN[10], we want DAYS_CN[a] + DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
b = 10
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, if `a=2, b=0`, then `DAYS_CN[2] + DAYS_CN[10]` is `二` + `十` = `二十`.
If `a=3, b=0`, then `DAYS_CN[3] + DAYS_CN[10]` is `三` + `十` = `三十`.
If `a=1, b=0`, then `a=0, b=10` -> `TENS[0] + DAYS_CN[10]` = `初十`.
This works.
Let's refine the `day_cn` implementation to be concise.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's test this logic in my head:
- day 1: a=0, b=1 -> TENS[0] + DAYS_CN[1] = 初一. OK.
- day 9: a=0, b=9 -> TENS[0] + DAYS_CN[9] = 初九. OK.
- day 10: a=1, b=0 -> TENS[0] + DAYS_CN[10] = 初十. OK.
- day 11: a=1, b=1 -> TENS[1] + DAYS_CN[1] = 十一. OK.
- day 19: a=1, b=9 -> TENS[1] + DAYS_CN[9] = 十九. OK.
- day 20: a=2, b=0 -> DAYS_CN[2] + DAYS_CN[10] = 二十. OK.
- day 21: a=2, b=1 -> TENS[2] + DAYS_CN[1] = 廿一. OK.
- day 29: a=2, b=9 -> TENS[2] + DAYS_CN[9] = 廿九. OK.
- day 30: a=3, b=0 -> DAYS_CN[3] + DAYS_CN[10] = 三十. OK.
- day 31: a=3, b=1 -> TENS[3] + DAYS_CN[1] = 卅一. OK.
Is `廿一` (21) and `卅一` (31) desired? The user specifically complained about `廿十` and `卅十`.
In traditional Chinese lunar calendars, `廿一` is very common for 21.
However, some might prefer `二十一`.
But if we change `廿一` to `二十一`, we have to change `TENS[2]` and `TENS[3]`.
If we change `TENS[2]` to `'二十'`, then `TENS[2] + DAYS_CN[1]` becomes `'二十一'`.
But if we do that, what happens to `TENS` for other things?
`TENS = '初十廿卅'`
If we change it to `TENS = '初十二十三十'`, it's no longer a string of single characters.
Let's look at `day_cn` again.
`TextUtils.TENS[a] + TextUtils.DAYS_CN[b]`
If we want 21 to be `二十一`:
`a=2, b=1`.
`TENS[2]` would need to be `二十`.
Then `TENS[2] + DAYS_CN[1]` = `二十一`.
Then for `day=20`: `a=2, b=0`.
Current code makes `b=10, a=2`.
`TENS[2] + DAYS_CN[10]` = `二十十`. (Wrong)
So if we want to support `二十一` and `三十一`, we should probably change the whole logic.
But the user ONLY mentioned `二十` and `三十`.
"“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。"
This suggests that `廿` is OK as a prefix for 21-29, because `廿一` means `20 + 1`. But `廿十` means `20 + 10`, which is `30`, but it's used for `20`.
Wait, if `廿` means `20`, then `廿` by itself should probably be used for 20?
But the user says "正确的应该为'二十'".
If we use the logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: return TextUtils.TENS[0] + TextUtils.DAYS_CN[10] # 初十
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10] # 二十 or 三十
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
This matches the user's request exactly.
Let's double check if there are other cases. What about `day > 30`?
Some lunar months have 29 or 30 days.
If `day=31` (though rare in lunar calendars, maybe possible?), `a=3, b=1` -> `廿一`? No, `卅一`.
`TENS[3]` is `卅`.
Let's verify the current `TENS` and `DAYS_CN` again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
If `day=20`:
`divmod(20, 10)` -> `a=2, b=0`.
`b==0` is True. `a==1` is False.
Returns `DAYS_CN[2] + DAYS_CN[10]` = `'二' + '十'` = `'二十'`. Correct.
If `day=30`:
`divmod(30, 10)` -> `a=3, b=0`.
`b==0` is True. `a==1` is False.
Returns `DAYS_CN[3] + DAYS_CN[10]` = `'三' + '十'` = `'三十'`. Correct.
If `day=10`:
`divmod(10, 10)` -> `a=1, b=0`.
`b==0` is True. `a==1` is True.
Returns `TENS[0] + DAYS_CN[10]` = `'初' + '十'` = `'初十'`. Correct.
If `day=1`:
`divmod(1, 10)` -> `a=0, b=1`.
`b==0` is False.
Returns `TENS[0] + DAYS_CN[1]` = `'初' + '一'` = `'初一'`. Correct.
If `day=11`:
`divmod(11, 10)` -> `a=1, b=1`.
`b==0` is False.
Returns `TENS[1] + DAYS_CN[1]` = `'十' + '一'` = `'十一'`. Correct.
If `day=21`:
`divmod(21, 10)` -> `a=2, b=1`.
`b==0` is False.
Returns `TENS[2] + DAYS_CN[1]` = `'廿' + '一'` = `'廿一'`. Correct.
If `day=31`:
`divmod(31, 10)` -> `a=3, b=1`.
`b==0` is False.
Returns `TENS[3] + DAYS_CN[1]` = `'卅' + '一'` = `'卅一'`. Correct.
This seems perfectly aligned with the requirements.
Now I will apply the fix.
Wait, I should make sure I don't break anything else.
The current implementation is:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
My proposed change:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
if a == 1: # 10
return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
One detail: what if `day` is 0? The code doesn't seem to handle it, but lunar days are 1-indexed.
What if `day` is > 39? `TENS[a]` would raise `IndexError`. But lunar months have at most 30 days (usually).
Let's check if `TextUtils` is used anywhere else.
`grep -rn "TextUtils.day_cn" borax/calendars/lunardate.py`
It is called by `LunarDate` properties probably.
Let's verify where `LunarDate` uses it.
TOOL CALL · run_command
{
"command": "grep -rn \"day_cn\" borax/calendars/lunardate.py"
}Result of run_command 158 characters
{
"status": "ok",
"stdout": "352: def day_cn(day: int) -> str:\n445: return '{}'.format(TextUtils.day_cn(self.day))\n",
"stderr": "",
"exit_code": 0
}Generated tokens 2,987 tokens · stopped: STOP
Confirmed. `day 20` is `廿十` and `day 30` is `卅十`.
Now, let's consider if `day 21` should be `二十一` instead of `廿一`.
Usually, `廿` is an abbreviation for `二十`.
Using `廿一` is common.
But `廿十` is definitely wrong.
If I change the logic to:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: # 10
return TextUtils.TENS[0] + TextUtils.DAYS_CN[10] # 初十
elif a == 2: # 20
return TextUtils.DAYS_CN[2] + TextUtils.DAYS_CN[10] # 二十
elif a == 3: # 30
return TextUtils.DAYS_CN[3] + TextUtils.DAYS_CN[10] # 三十
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, for `day=11`: `a=1, b=1` -> `TENS[1] + DAYS_CN[1]` -> `十一`. (Correct)
For `day=21`: `a=2, b=1` -> `TENS[2] + DAYS_CN[1]` -> `廿一`. (Correct/Common)
For `day=31`: `a=3, b=1` -> `TENS[3] + DAYS_CN[1]` -> `卅一`. (Correct/Common)
Let's double check if there's a more elegant way to implement this.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: # 10
a = 0
else: # 20, 30
# Instead of TENS[a] + DAYS_CN[10], we want DAYS_CN[a] + DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
b = 10
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, if `a=2, b=0`, then `DAYS_CN[2] + DAYS_CN[10]` is `二` + `十` = `二十`.
If `a=3, b=0`, then `DAYS_CN[3] + DAYS_CN[10]` is `三` + `十` = `三十`.
If `a=1, b=0`, then `a=0, b=10` -> `TENS[0] + DAYS_CN[10]` = `初十`.
This works.
Let's refine the `day_cn` implementation to be concise.
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Let's test this logic in my head:
- day 1: a=0, b=1 -> TENS[0] + DAYS_CN[1] = 初一. OK.
- day 9: a=0, b=9 -> TENS[0] + DAYS_CN[9] = 初九. OK.
- day 10: a=1, b=0 -> TENS[0] + DAYS_CN[10] = 初十. OK.
- day 11: a=1, b=1 -> TENS[1] + DAYS_CN[1] = 十一. OK.
- day 19: a=1, b=9 -> TENS[1] + DAYS_CN[9] = 十九. OK.
- day 20: a=2, b=0 -> DAYS_CN[2] + DAYS_CN[10] = 二十. OK.
- day 21: a=2, b=1 -> TENS[2] + DAYS_CN[1] = 廿一. OK.
- day 29: a=2, b=9 -> TENS[2] + DAYS_CN[9] = 廿九. OK.
- day 30: a=3, b=0 -> DAYS_CN[3] + DAYS_CN[10] = 三十. OK.
- day 31: a=3, b=1 -> TENS[3] + DAYS_CN[1] = 卅一. OK.
Is `廿一` (21) and `卅一` (31) desired? The user specifically complained about `廿十` and `卅十`.
In traditional Chinese lunar calendars, `廿一` is very common for 21.
However, some might prefer `二十一`.
But if we change `廿一` to `二十一`, we have to change `TENS[2]` and `TENS[3]`.
If we change `TENS[2]` to `'二十'`, then `TENS[2] + DAYS_CN[1]` becomes `'二十一'`.
But if we do that, what happens to `TENS` for other things?
`TENS = '初十廿卅'`
If we change it to `TENS = '初十二十三十'`, it's no longer a string of single characters.
Let's look at `day_cn` again.
`TextUtils.TENS[a] + TextUtils.DAYS_CN[b]`
If we want 21 to be `二十一`:
`a=2, b=1`.
`TENS[2]` would need to be `二十`.
Then `TENS[2] + DAYS_CN[1]` = `二十一`.
Then for `day=20`: `a=2, b=0`.
Current code makes `b=10, a=2`.
`TENS[2] + DAYS_CN[10]` = `二十十`. (Wrong)
So if we want to support `二十一` and `三十一`, we should probably change the whole logic.
But the user ONLY mentioned `二十` and `三十`.
"“廿十”、“卅十” 是不正确的用法，因为“廿”、“卅” 本身就是二十、三十的意思了，正确的应该为“二十”、“三十”。"
This suggests that `廿` is OK as a prefix for 21-29, because `廿一` means `20 + 1`. But `廿十` means `20 + 10`, which is `30`, but it's used for `20`.
Wait, if `廿` means `20`, then `廿` by itself should probably be used for 20?
But the user says "正确的应该为'二十'".
If we use the logic:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: return TextUtils.TENS[0] + TextUtils.DAYS_CN[10] # 初十
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10] # 二十 or 三十
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
This matches the user's request exactly.
Let's double check if there are other cases. What about `day > 30`?
Some lunar months have 29 or 30 days.
If `day=31` (though rare in lunar calendars, maybe possible?), `a=3, b=1` -> `廿一`? No, `卅一`.
`TENS[3]` is `卅`.
Let's verify the current `TENS` and `DAYS_CN` again.
`TENS = '初十廿卅'`
`DAYS_CN = '日一二三四五六七八九十'`
If `day=20`:
`divmod(20, 10)` -> `a=2, b=0`.
`b==0` is True. `a==1` is False.
Returns `DAYS_CN[2] + DAYS_CN[10]` = `'二' + '十'` = `'二十'`. Correct.
If `day=30`:
`divmod(30, 10)` -> `a=3, b=0`.
`b==0` is True. `a==1` is False.
Returns `DAYS_CN[3] + DAYS_CN[10]` = `'三' + '十'` = `'三十'`. Correct.
If `day=10`:
`divmod(10, 10)` -> `a=1, b=0`.
`b==0` is True. `a==1` is True.
Returns `TENS[0] + DAYS_CN[10]` = `'初' + '十'` = `'初十'`. Correct.
If `day=1`:
`divmod(1, 10)` -> `a=0, b=1`.
`b==0` is False.
Returns `TENS[0] + DAYS_CN[1]` = `'初' + '一'` = `'初一'`. Correct.
If `day=11`:
`divmod(11, 10)` -> `a=1, b=1`.
`b==0` is False.
Returns `TENS[1] + DAYS_CN[1]` = `'十' + '一'` = `'十一'`. Correct.
If `day=21`:
`divmod(21, 10)` -> `a=2, b=1`.
`b==0` is False.
Returns `TENS[2] + DAYS_CN[1]` = `'廿' + '一'` = `'廿一'`. Correct.
If `day=31`:
`divmod(31, 10)` -> `a=3, b=1`.
`b==0` is False.
Returns `TENS[3] + DAYS_CN[1]` = `'卅' + '一'` = `'卅一'`. Correct.
This seems perfectly aligned with the requirements.
Now I will apply the fix.
Wait, I should make sure I don't break anything else.
The current implementation is:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
My proposed change:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
if a == 1: # 10
return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
One detail: what if `day` is 0? The code doesn't seem to handle it, but lunar days are 1-indexed.
What if `day` is > 39? `TENS[a]` would raise `IndexError`. But lunar months have at most 30 days (usually).
Let's check if `TextUtils` is used anywhere else.
`grep -rn "TextUtils.day_cn" borax/calendars/lunardate.py`
It is called by `LunarDate` properties probably.
Let's verify where `LunarDate` uses it.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "day_cn" borax/calendars/lunardate.py<|"|>}<tool_call|><|tool_response>
Turn 6at 387 s58 tokens out10,448 prompt tokens
Line 445 is inside some method. Let's see.
TOOL CALL · read_file
{
"end_line": 450,
"filepath": "borax/calendars/lunardate.py",
"start_line": 440
}Result of read_file 443 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"content": " def cn_month(self) -> str:\n return '{}'.format(TextUtils.month_cn(self.month))\n\n @property\n def cn_day(self) -> str:\n return '{}'.format(TextUtils.day_cn(self.day))\n\n @property\n def cn_leap(self) -> str:\n return '闰' if self.leap else ''\n",
"start_line": 440,
"end_line": 450,
"total_lines": 679,
"is_truncated": false
}Generated tokens 58 tokens · stopped: STOP
Line 445 is inside some method. Let's see.
<channel|><|tool_call>call:read_file{end_line:450,filepath:<|"|>borax/calendars/lunardate.py<|"|>,start_line:440}<tool_call|><|tool_response>
Turn 7at 396 s289 tokens out10,682 prompt tokens
Yes, `cn_day` property uses it. Now I will apply the fix.
TOOL CALL · edit_file
{
"filepath": "borax/calendars/lunardate.py",
"new_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10, 20, 30\n if a == 1: # 10\n return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]\n return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]",
"old_string": " @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n if b == 0: # 10,20,30\n b = 10\n if a == 1: # 10\n a = 0\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]"
}Result of edit_file 675 characters
{
"status": "ok",
"filepath": "borax/calendars/lunardate.py",
"occurrences": 1,
"strategy": "exact",
"diff": "--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -351,10 +351,10 @@\n @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n- if b == 0: # 10,20,30\n- b = 10\n+ if b == 0: # 10, 20, 30\n if a == 1: # 10\n- a = 0\n+ return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"is_truncated": false
}Generated tokens 289 tokens · stopped: STOP
Yes, `cn_day` property uses it.
Now I will apply the fix.<channel|><|tool_call>call:edit_file{filepath:<|"|>borax/calendars/lunardate.py<|"|>,new_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10, 20, 30
if a == 1: # 10
return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]<|"|>,old_string:<|"|> @staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]<|"|>}<tool_call|><|tool_response>
Turn 8at 433 s682 tokens out11,268 prompt tokens
Wait, I just noticed something in the `edit_file` diff.
Old:
```python
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
New:
```python
if b == 0: # 10, 20, 30
if a == 1: # 10
return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, in the `edit_file` result, the diff shows:
```
- if b == 0: # 10,20,30
- b = 10
+ if b == 0: # 10, 20, 30
if a == 1: # 10
- a = 0
+ return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
This looks correct. It removes `b = 10` and replaces the inner `if` block and return.
Let's verify it with a reproduction script.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom borax.calendars.lunardate import LunarDate, TextUtils\n\ntest_cases = [\n (1, \"初一\"),\n (9, \"初九\"),\n (10, \"初十\"),\n (11, \"十一\"),\n (19, \"十九\"),\n (20, \"二十\"),\n (21, \"廿一\"),\n (29, \"廿九\"),\n (30, \"三十\"),\n (31, \"卅一\"),\n]\n\nfor day, expected in test_cases:\n actual = TextUtils.day_cn(day)\n print(f\"day {day}: expected {expected}, actual {actual} {'OK' if actual == expected else 'FAILED'}\")\n\nld = LunarDate(2020, 10, 20, 0)\nprint(f\"LunarDate(2020,10,20).cn_day: {ld.cn_day} (expected 二十)\")\nprint(f\"LunarDate(2020,10,20).cn_str(): {ld.cn_str()} (should contain 二十)\")\nPY\n"
}Result of run_command 794 characters
{
"status": "ok",
"stdout": "day 1: expected 初一, actual 初一 OK\nday 9: expected 初九, actual 初九 OK\nday 10: expected 初十, actual 初十 OK\nday 11: expected 十一, actual 十一 OK\nday 19: expected 十九, actual 十九 OK\nday 20: expected 二十, actual 二十 OK\nday 21: expected 廿一, actual 廿一 OK\nday 29: expected 廿九, actual 廿九 OK\nday 30: expected 三十, actual 三十 OK\nday 31: expected 卅一, actual 卅一 OK\nLunarDate(2020,10,20).cn_day: 二十 (expected 二十)\nLunarDate(2020,10,20).cn_str(): 二〇二〇年十月二十 (should contain 二十)\n",
"stderr": "",
"exit_code": 0
}Generated tokens 682 tokens · stopped: STOP
Wait, I just noticed something in the `edit_file` diff.
Old:
```python
if b == 0: # 10,20,30
b = 10
if a == 1: # 10
a = 0
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
New:
```python
if b == 0: # 10, 20, 30
if a == 1: # 10
return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
Wait, in the `edit_file` result, the diff shows:
```
- if b == 0: # 10,20,30
- b = 10
+ if b == 0: # 10, 20, 30
if a == 1: # 10
- a = 0
+ return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
```
This looks correct. It removes `b = 10` and replaces the inner `if` block and return.
Let's verify it with a reproduction script.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from borax.calendars.lunardate import LunarDate, TextUtils
test_cases = [
(1, "初一"),
(9, "初九"),
(10, "初十"),
(11, "十一"),
(19, "十九"),
(20, "二十"),
(21, "廿一"),
(29, "廿九"),
(30, "三十"),
(31, "卅一"),
]
for day, expected in test_cases:
actual = TextUtils.day_cn(day)
print(f"day {day}: expected {expected}, actual {actual} {'OK' if actual == expected else 'FAILED'}")
ld = LunarDate(2020, 10, 20, 0)
print(f"LunarDate(2020,10,20).cn_day: {ld.cn_day} (expected 二十)")
print(f"LunarDate(2020,10,20).cn_str(): {ld.cn_str()} (should contain 二十)")
PY
<|"|>}<tool_call|><|tool_response>
Turn 9at 438 s65 tokens out12,201 prompt tokens
Everything looks correct now. I should check if there are any tests for lunar date that I might have broken.
TOOL CALL · run_command
{
"command": "pytest tests/borax/calendars/test_lunardate.py -q --tb=short --no-header"
}Result of run_command 310 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "ERROR: file or directory not found: tests/borax/calendars/test_lunardate.py\n\n",
"details": {
"stdout": "\nno tests ran in 0.00s\n",
"stderr": "ERROR: file or directory not found: tests/borax/calendars/test_lunardate.py\n\n",
"exit_code": 4
}
}Generated tokens 65 tokens · stopped: STOP
Everything looks correct now.
I should check if there are any tests for lunar date that I might have broken.
<channel|><|tool_call>call:run_command{command:<|"|>pytest tests/borax/calendars/test_lunardate.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Turn 10at 443 s49 tokens out12,391 prompt tokens
Ah, I assumed the test file name. Let's find where the tests for `lunardate` are.
TOOL CALL · run_command
{
"command": "find tests -name \"*lunardate*\""
}Result of run_command 85 characters
{
"status": "ok",
"stdout": "tests/test_lunardate.py\n",
"stderr": "",
"exit_code": 0
}Generated tokens 49 tokens · stopped: STOP
Ah, I assumed the test file name. Let's find where the tests for `lunardate` are.
<channel|><|tool_call>call:run_command{command:<|"|>find tests -name "*lunardate*"<|"|>}<tool_call|><|tool_response>
Turn 11at 444 s51 tokens out12,489 prompt tokens
The test file is `tests/test_lunardate.py`.
TOOL CALL · run_command
{
"command": "pytest tests/test_lunardate.py -q --tb=short --no-header"
}Result of run_command 161 characters
{
"status": "ok",
"stdout": "................ [100%]\n16 passed in 0.02s\n",
"stderr": "",
"exit_code": 0
}Generated tokens 51 tokens · stopped: STOP
The test file is `tests/test_lunardate.py`.
<channel|><|tool_call>call:run_command{command:<|"|>pytest tests/test_lunardate.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Turn 12at 447 s44 tokens out12,600 prompt tokens
All tests passed. I'll do a final check of the diff and the workspace before submitting.
TOOL CALL · run_command
{
"command": "git status --short && git diff"
}Result of run_command 756 characters
{
"status": "ok",
"stdout": " M borax/calendars/lunardate.py\ndiff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py\nindex b7adda7..e7035e9 100644\n--- a/borax/calendars/lunardate.py\n+++ b/borax/calendars/lunardate.py\n@@ -351,10 +351,10 @@ class TextUtils:\n @staticmethod\n def day_cn(day: int) -> str:\n a, b = divmod(day, 10)\n- if b == 0: # 10,20,30\n- b = 10\n+ if b == 0: # 10, 20, 30\n if a == 1: # 10\n- a = 0\n+ return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]\n+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]\n return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]\n \n @staticmethod\n",
"stderr": "",
"exit_code": 0
}Generated tokens 44 tokens · stopped: STOP
All tests passed.
I'll do a final check of the diff and the workspace before submitting.
<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Turn 13at 450 s41 tokens out12,986 prompt tokens
The diff is clean and minimal. I have verified the fix with a reproduction script and the existing tests. I am ready to submit.
TOOL CALL · submit_patch
Result of submit_patch 55 characters
{
"status": "ok",
"patch_size": 645,
"files_changed": 1
}Generated tokens 41 tokens · stopped: STOP
The diff is clean and minimal.
I have verified the fix with a reproduction script and the existing tests.
I am ready to submit.
<channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>
Patch, tests and logs
Final code change Included
diff --git a/borax/calendars/lunardate.py b/borax/calendars/lunardate.py
index b7adda7..e7035e9 100644
--- a/borax/calendars/lunardate.py
+++ b/borax/calendars/lunardate.py
@@ -351,10 +351,10 @@ class TextUtils:
@staticmethod
def day_cn(day: int) -> str:
a, b = divmod(day, 10)
- if b == 0: # 10,20,30
- b = 10
+ if b == 0: # 10, 20, 30
if a == 1: # 10
- a = 0
+ return TextUtils.TENS[0] + TextUtils.DAYS_CN[10]
+ return TextUtils.DAYS_CN[a] + TextUtils.DAYS_CN[10]
return TextUtils.TENS[a] + TextUtils.DAYS_CN[b]
@staticmethod
Test output Included
============================= test session starts ============================== collected 128 items tests/test_birthday.py ... [ 2%] tests/test_calendars.py .. [ 3%] tests/test_chinese_number.py .... [ 7%] tests/test_choices.py ............. [ 17%] tests/test_daily_counter.py ... [ 19%] tests/test_dictionary.py . [ 20%] tests/test_fetch.py ...... [ 25%] tests/test_finance.py ... [ 27%] tests/test_htmls.py . [ 28%] tests/test_join.py ..... [ 32%] tests/test_json.py .... [ 35%] tests/test_lazy.py ... [ 37%] tests/test_lunar_benchmark.py . [ 38%] tests/test_lunar_sqlite3_feature.py . [ 39%] tests/test_lunardate.py ................. [ 52%] tests/test_mixed.py ........... [ 60%] tests/test_new_join.py ............ [ 70%] tests/test_percentage.py ... [ 72%] tests/test_proxy.py . [ 73%] tests/test_runtime_measurer.py ... [ 75%] tests/test_serial_generattor.py ...... [ 80%] tests/test_serial_pool.py .......... [ 88%] tests/test_singleton.py . [ 89%] tests/test_string_convert.py .... [ 92%] tests/test_tree_fetcher.py ... [ 94%] tests/test_utils.py ....... [100%] ==================================== PASSES ==================================== - generated xml file: /tmp/rebench-grade-0a50611abde14390b7ca499336c007bf.xml -- =========================== short test summary info ============================ PASSED tests/test_birthday.py::NominalAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::ActualAgeTestCase::test_nominal_age PASSED tests/test_birthday.py::MixedAgeTestCase::test_mixed PASSED tests/test_calendars.py::LastDayTestCase::test_fist_day_of_week PASSED tests/test_calendars.py::LastDayTestCase::test_last_day PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_lower_order PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_measure PASSED tests/test_chinese_number.py::ChineseNumberTestCase::test_chinese_number_upper_order PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_display PASSED tests/test_choices.py::FieldChoiceTestCase::test_get_value PASSED tests/test_choices.py::FieldChoiceTestCase::test_is_valid PASSED tests/test_choices.py::ChoicesItemTestCase::test_choices PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_display PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_names_and_values_and_labels PASSED tests/test_choices.py::ChoicesItemTestCase::test_get_value PASSED tests/test_choices.py::ChoicesItemTestCase::test_is_valid PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_display PASSED tests/test_choices.py::OffsetChoicesTestCase::test_get_value PASSED tests/test_choices.py::OffsetChoicesTestCase::test_is_valid PASSED tests/test_choices.py::DirectionChoicesTestCase::test_child_class PASSED tests/test_choices.py::DirectionChoicesTestCase::test_item_overwrite PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_increase PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance PASSED tests/test_daily_counter.py::DailyCounterTestCase::test_init_instance_with_invalid_raw PASSED tests/test_dictionary.py::AttributeDictTestCase::test_access PASSED tests/test_fetch.py::FetchTestCase::test_fetch PASSED tests/test_fetch.py::FetchTestCase::test_fetch_single PASSED tests/test_fetch.py::FetchTestCase::test_ifetch_multiple PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_custom_getter PASSED tests/test_fetch.py::FetchCustomGetterTestCase::test_with_dict PASSED tests/test_fetch.py::FetchAsDictTestCase::test_fetch_as_dict PASSED tests/test_finance.py::CapitalNumber::test_amount_capital PASSED tests/test_finance.py::CapitalNumber::test_decimal PASSED tests/test_finance.py::CapitalNumber::test_valid_range PASSED tests/test_htmls.py::HtmlTagTest::test_html_tags PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_join.py::JoinTestCase::test_as_kwargs PASSED tests/test_json.py::CJsonTestCase::test_custom_encoder PASSED tests/test_json.py::CJsonTestCase::test_dumps PASSED tests/test_json.py::CJsonTestCase::test_mixed_encoder PASSED tests/test_json.py::CJsonTestCase::test_singledispatch PASSED tests/test_lazy.py::LazyObjectTestCase::test_delete_attr PASSED tests/test_lazy.py::LazyObjectTestCase::test_lazy_object PASSED tests/test_lazy.py::LazyObjectTestCase::test_with_kwargs PASSED tests/test_lunar_benchmark.py::BenchmarkTestCase::test_edge_dates PASSED tests/test_lunar_sqlite3_feature.py::Sqlite3CustomFieldTestCase::test_custom_field PASSED tests/test_lunardate.py::TextUtilsTestCase::test_cn_day_text PASSED tests/test_lunardate.py::LunarDateTestCase::test_comparison PASSED tests/test_lunardate.py::LunarDateTestCase::test_convert_datetime PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_create_specific_dates PASSED tests/test_lunardate.py::LunarDateTestCase::test_immutable_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_new_date PASSED tests/test_lunardate.py::LunarDateTestCase::test_solar_and_lunar PASSED tests/test_lunardate.py::LunarDateTestCase::test_term_ganzhi_feature PASSED tests/test_lunardate.py::LunarDateTestCase::test_timedelta PASSED tests/test_lunardate.py::PrivateMethodsTestCase::test_year_info PASSED tests/test_lunardate.py::FormatterTestCase::test_cn_calendar_day PASSED tests/test_lunardate.py::FormatterTestCase::test_term PASSED tests/test_lunardate.py::FormatterTestCase::test_valid_format PASSED tests/test_lunardate.py::LCalendarTestCase::test_delta PASSED tests/test_lunardate.py::LCalendarTestCase::test_leap_check PASSED tests/test_lunardate.py::LCalendarTestCase::test_ndays PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_lunar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_solar PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_term PASSED tests/test_mixed.py::MixedDateTestCase::test_countdown_week PASSED tests/test_mixed.py::MixedDateTestCase::test_match PASSED tests/test_mixed.py::FuzzyTestCaseTest::test_fuzzy_feature PASSED tests/test_mixed.py::ReverseTestCase::test_solar_february PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_leap_countdown PASSED tests/test_mixed.py::LeapIgnoreTestCase::test_match PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_encode PASSED tests/test_mixed.py::SchemaEncoderTestCase::test_schema_factory PASSED tests/test_new_join.py::OnClauseTestCase::test_build PASSED tests/test_new_join.py::OnClauseTestCase::test_type_hints PASSED tests/test_new_join.py::SelectClauseTestCase::test_build PASSED tests/test_new_join.py::SelectClauseTestCase::test_type_hints PASSED tests/test_new_join.py::JoinOneTestCase::test_callback PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_custom_default PASSED tests/test_new_join.py::JoinOneTestCase::test_join_one_with_default PASSED tests/test_new_join.py::JoinOneTestCase::test_with_choices PASSED tests/test_new_join.py::JoinOneTestCase::test_with_dict PASSED tests/test_new_join.py::JoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinTestCase::test_basic_join PASSED tests/test_new_join.py::DeepJoinOneTestCase::test_with_dict PASSED tests/test_percentage.py::PercentTestCase::test_basic_use PASSED tests/test_percentage.py::PercentTestCase::test_custom_places PASSED tests/test_percentage.py::PercentTestCase::test_zero_total PASSED tests/test_proxy.py::ProxyTestCase::test_proxy PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_multiple_tags PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_one_hit PASSED tests/test_runtime_measurer.py::RuntimeMeasurerTestCase::test_with PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_func PASSED tests/test_serial_generattor.py::SerialGeneratorTestCase::test_serial_generator PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_error_base PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_hex_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_string_serial PASSED tests/test_serial_generattor.py::StringSerialGeneratorTestCase::test_upper_edge_value PASSED tests/test_serial_pool.py::SerialValueGeneratorTestCase::test_value_generator PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_basic PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_hex_value PASSED tests/test_serial_pool.py::LabelFormatOptsTestCase::test_invalid_opts PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_basic_generate PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_custom_label_fmt PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_data_manage PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_elements_source PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_error_create PASSED tests/test_serial_pool.py::SerialNoPoolTestCase::test_success_create PASSED tests/test_singleton.py::test_singleton PASSED tests/test_string_convert.py::StringConvertTestCase::test_all PASSED tests/test_string_convert.py::PercentageStringTestCase::test_convert PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_rotate PASSED tests/test_string_convert.py::FilenameRotateTestCase::test_with_one_datetime PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_forward_reference PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_parse_extra PASSED tests/test_tree_fetcher.py::TreeFetcherTestCase::test_pll2cnl PASSED tests/test_utils.py::BaseTestCase::test_chain PASSED tests/test_utils.py::BaseTestCase::test_force_iterable PASSED tests/test_utils.py::BaseTestCase::test_item_cycle PASSED tests/test_utils.py::BaseTestCase::test_item_cycle2 PASSED tests/test_utils.py::StringTrimTestCase::test_trim_list PASSED tests/test_utils.py::FirstofTestCase::test_first_of PASSED tests/test_utils.py::ForceListTestCase::test_force_list ============================= 128 passed in 0.23s ==============================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites name="pytest tests"><testsuite name="pytest" errors="0" failures="0" skipped="0" tests="139" time="0.226" timestamp="2026-11-14T03:49:26.849770+00:00" hostname="7fc0fc7a8c90"><testcase classname="tests.test_birthday.NominalAgeTestCase" name="test_nominal_age" time="0.001" /><testcase classname="tests.test_birthday.ActualAgeTestCase" name="test_nominal_age" time="0.000" /><testcase classname="tests.test_birthday.MixedAgeTestCase" name="test_mixed" time="0.000" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_fist_day_of_week" time="0.003" /><testcase classname="tests.test_calendars.LastDayTestCase" name="test_last_day" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number" time="0.001" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_lower_order" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_measure" time="0.000" /><testcase classname="tests.test_chinese_number.ChineseNumberTestCase" name="test_chinese_number_upper_order" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.FieldChoiceTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_choices" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_names_and_values_and_labels" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.ChoicesItemTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_display" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_get_value" time="0.000" /><testcase classname="tests.test_choices.OffsetChoicesTestCase" name="test_is_valid" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_child_class" time="0.000" /><testcase classname="tests.test_choices.DirectionChoicesTestCase" name="test_item_overwrite" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_increase" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance" time="0.000" /><testcase classname="tests.test_daily_counter.DailyCounterTestCase" name="test_init_instance_with_invalid_raw" time="0.000" /><testcase classname="tests.test_dictionary.AttributeDictTestCase" name="test_access" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_fetch_single" time="0.000" /><testcase classname="tests.test_fetch.FetchTestCase" name="test_ifetch_multiple" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_custom_getter" time="0.000" /><testcase classname="tests.test_fetch.FetchCustomGetterTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_fetch.FetchAsDictTestCase" name="test_fetch_as_dict" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_amount_capital" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_decimal" time="0.000" /><testcase classname="tests.test_finance.CapitalNumber" name="test_valid_range" time="0.000" /><testcase classname="tests.test_htmls.HtmlTagTest" name="test_html_tags" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_join.JoinTestCase" name="test_as_kwargs" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_custom_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_dumps" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_mixed_encoder" time="0.000" /><testcase classname="tests.test_json.CJsonTestCase" name="test_singledispatch" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_delete_attr" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_lazy_object" time="0.000" /><testcase classname="tests.test_lazy.LazyObjectTestCase" name="test_with_kwargs" time="0.000" /><testcase classname="tests.test_lunar_benchmark.BenchmarkTestCase" name="test_edge_dates" time="0.000" /><testcase classname="tests.test_lunar_sqlite3_feature.Sqlite3CustomFieldTestCase" name="test_custom_field" time="0.001" /><testcase classname="tests.test_lunardate.TextUtilsTestCase" name="test_cn_day_text" time="0.001" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_comparison" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_convert_datetime" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_create_specific_dates" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_immutable_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_new_date" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_solar_and_lunar" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_term_ganzhi_feature" time="0.000" /><testcase classname="tests.test_lunardate.LunarDateTestCase" name="test_timedelta" time="0.000" /><testcase classname="tests.test_lunardate.PrivateMethodsTestCase" name="test_year_info" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_cn_calendar_day" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_term" time="0.000" /><testcase classname="tests.test_lunardate.FormatterTestCase" name="test_valid_format" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_delta" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_leap_check" time="0.000" /><testcase classname="tests.test_lunardate.LCalendarTestCase" name="test_ndays" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_lunar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_solar" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_term" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_countdown_week" time="0.000" /><testcase classname="tests.test_mixed.MixedDateTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.FuzzyTestCaseTest" name="test_fuzzy_feature" time="0.000" /><testcase classname="tests.test_mixed.ReverseTestCase" name="test_solar_february" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_leap_countdown" time="0.000" /><testcase classname="tests.test_mixed.LeapIgnoreTestCase" name="test_match" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_encode" time="0.000" /><testcase classname="tests.test_mixed.SchemaEncoderTestCase" name="test_schema_factory" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.OnClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_build" time="0.000" /><testcase classname="tests.test_new_join.SelectClauseTestCase" name="test_type_hints" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_callback" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_custom_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_join_one_with_default" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_choices" time="0.000" /><testcase classname="tests.test_new_join.JoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_new_join.JoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinTestCase" name="test_basic_join" time="0.000" /><testcase classname="tests.test_new_join.DeepJoinOneTestCase" name="test_with_dict" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_basic_use" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_custom_places" time="0.000" /><testcase classname="tests.test_percentage.PercentTestCase" name="test_zero_total" time="0.000" /><testcase classname="tests.test_proxy.ProxyTestCase" name="test_proxy" time="0.000" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_multiple_tags" time="0.002" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_one_hit" time="0.001" /><testcase classname="tests.test_runtime_measurer.RuntimeMeasurerTestCase" name="test_with" time="0.001" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_func" time="0.000" /><testcase classname="tests.test_serial_generattor.SerialGeneratorTestCase" name="test_serial_generator" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_error_base" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_hex_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_string_serial" time="0.000" /><testcase classname="tests.test_serial_generattor.StringSerialGeneratorTestCase" name="test_upper_edge_value" time="0.000" /><testcase classname="tests.test_serial_pool.SerialValueGeneratorTestCase" name="test_value_generator" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_basic" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_hex_value" time="0.000" /><testcase classname="tests.test_serial_pool.LabelFormatOptsTestCase" name="test_invalid_opts" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_basic_generate" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_custom_label_fmt" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_data_manage" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_elements_source" time="0.012" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_error_create" time="0.000" /><testcase classname="tests.test_serial_pool.SerialNoPoolTestCase" name="test_success_create" time="0.000" /><testcase classname="tests.test_singleton" name="test_singleton" time="0.000" /><testcase classname="tests.test_string_convert.StringConvertTestCase" name="test_all" time="0.001" /><testcase classname="tests.test_string_convert.PercentageStringTestCase" name="test_convert" time="0.000" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_rotate" time="0.001" /><testcase classname="tests.test_string_convert.FilenameRotateTestCase" name="test_with_one_datetime" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_forward_reference" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_parse_extra" time="0.000" /><testcase classname="tests.test_tree_fetcher.TreeFetcherTestCase" name="test_pll2cnl" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_chain" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_force_iterable" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle" time="0.000" /><testcase classname="tests.test_utils.BaseTestCase" name="test_item_cycle2" time="0.001" /><testcase classname="tests.test_utils.StringTrimTestCase" name="test_trim_list" time="0.000" /><testcase classname="tests.test_utils.FirstofTestCase" name="test_first_of" time="0.000" /><testcase classname="tests.test_utils.ForceListTestCase" name="test_force_list" time="0.000" /></testsuite></testsuites>
Agent log Included
[ 0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
[ 0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository kinegratii/borax.
[ 19.1s] 💭 (675 chars) "The user is reporting a bug in `borax.calendars.lunardate.TextUtils.day_cn`.
Specifically, for days 20 and 30 of the lun..."
[ 19.1s] 🔧 run_command grep -rn --include="*.py" "def day_cn" borax/calendars/lunardate.py
[ 19.2s] → 352: def day_cn(day: int) -> str:
[ 25.1s] 💭 (108 chars) "Okay, `day_cn` is at line 352 of `borax/calendars/lunardate.py`. Now let's read the function
implementation."
[ 25.1s] 📖 read_file (borax/calendars/lunardate.py)
[ 25.1s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': ' ANIMALS =
\'鼠牛虎兔龙蛇马羊猴鸡狗猪\'\n\n @staticme…
[ 34.8s] 💭 (411 chars) "I see the implementation of `day_cn`:
```python
@staticmethod
def day_cn(day: int) -> str:
a, b = divmo..."
[ 34.8s] 📖 read_file (borax/calendars/lunardate.py)
[ 34.8s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': "# ------ Stems and Branches
------\n\n\nclass T…
[ 230.6s] 💭 (5126 chars) "Here are the constants:
`TENS = '初十廿卅'` (Indices: 0: 초(初), 1: 十, 2: 廿, 3: 卅)
`DAYS_CN = '日一二三四五六七八九十'` (Indices: 0: 日, 1..."
[ 230.6s] 🔧 run_command (14 lines) python3 - <<'PY'
[ 230.7s] → day 20: 廿十
[ 381.8s] 💭 (6724 chars) "Confirmed. `day 20` is `廿十` and `day 30` is `卅十`.
Now, let's consider if `day 21` should be `二十一` instead of `廿一`.
Usua..."
[ 381.8s] 🔧 run_command grep -rn "day_cn" borax/calendars/lunardate.py
[ 381.8s] → 352: def day_cn(day: int) -> str:
[ 386.5s] 💭 (42 chars) "Line 445 is inside some method. Let's see."
[ 386.5s] 📖 read_file (borax/calendars/lunardate.py)
[ 386.5s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'content': " def cn_month(self) ->
str:\n return …
[ 395.6s] 💭 (58 chars) "Yes, `cn_day` property uses it.
Now I will apply the fix."
[ 395.6s] ✏️ edit_file (borax/calendars/lunardate.py)
[ 395.7s] ✓ {'status': 'ok', 'filepath': 'borax/calendars/lunardate.py', 'occurrences': 1, 'strategy': 'exact',
'diff': '--- a/borax…
[ 432.9s] 💭 (1014 chars) "Wait, I just noticed something in the `edit_file` diff.
Old:
```python
if b == 0: # 10,20,30
b = 10..."
[ 432.9s] 🔧 run_command (24 lines) python3 - <<'PY'
[ 433.0s] → day 1: expected 初一, actual 初一 OK
[ 437.4s] 💭 (108 chars) "Everything looks correct now.
I should check if there are any tests for lunar date that I might have broken."
[ 437.4s] 🔧 run_command pytest tests/borax/calendars/test_lunardate.py -q --tb=short --no-header
[ 437.8s] → error (exit 0):
[ 442.0s] 💭 (81 chars) "Ah, I assumed the test file name. Let's find where the tests for `lunardate` are."
[ 442.0s] 🔧 run_command find tests -name "*lunardate*"
[ 442.1s] → tests/test_lunardate.py
[ 443.8s] 💭 (43 chars) "The test file is `tests/test_lunardate.py`."
[ 443.8s] 🔧 run_command pytest tests/test_lunardate.py -q --tb=short --no-header
[ 444.0s] → ................ [100%]
[ 446.0s] 💭 (89 chars) "All tests passed.
I'll do a final check of the diff and the workspace before submitting."
[ 446.0s] 🔧 run_command git status --short && git diff
[ 446.1s] → M borax/calendars/lunardate.py
[ 449.2s] 💭 (127 chars) "The diff is clean and minimal.
I have verified the fix with a reproduction script and the existing tests.
I am ready to ..."
[ 449.2s] 🤖 submit_patch
[ 449.3s] → submit_patch: {"status": "ok", "patch_size": 645, "files_changed": 1}
Native result row
{
"agent_error": "Agent exceeded session timeout (7.5 min)",
"duration_seconds": 453.9,
"error": "Agent exceeded session timeout (7.5 min)",
"grade": {
"collected_tests": 128,
"competition_junit_ok": true,
"error": null,
"required_issues_count": 0,
"resolved": true,
"status_counts": {
"PASSED": 128
},
"strict_clean_patch": true,
"test_exit_code": 0
},
"instance_id": "kinegratii__borax-23",
"pass_idx": 0,
"patch_chars": 645,
"phase1_seconds": 452.74,
"repo": "kinegratii/borax",
"request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/kinegratii__borax-23__p0__r0.jsonl",
"resolved": true,
"rollout_idx": 0,
"run_key": "kinegratii__borax-23__p0__r0",
"strict_clean_patch": true,
"tool_calls": 12,
"total_llm_calls": 13,
"trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_kinegratii__borax-23__p0__r0.json"
}