ROLLOUT 4 · ncclient/ncclient
ncclient__ncclient-418
Solved
452 stotal time
27tool calls
29model calls
6,805tokens generated
224,355prompt tokens read
No error recorded
⚠ The request log has 28 model calls but the trace has 30 agent calls, so tokens are listed separately instead of beside each turn.
Turn by turn
Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.
System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`. Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run. ## Critical Environment & Grader Rules 1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`. 2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files. 3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`. 4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks: `pytest path/to/test_file.py -k pattern -q --tb=short --no-header` If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off. 5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission. ## Execution Protocol ### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls) - The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories. - Run a single compound `run_command` with `grep -rn --include="*.py"` to locate: (a) the exact symbols, error strings, or functions from the problem description, (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and (c) the closest existing unit test files under `tests/`. ### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls) - Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests. - Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types. ### Phase 3 — Reproduce Bug in One Call (1 tool call) - Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts. ### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls) - Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`. - Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests. - **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`. ### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls) - Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`. - Run `git status --short && git diff` via `run_command`. Confirm: - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately), - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched), - Minimal, clean diff with valid imports and indentation. - Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 4,220 characters
You are evaluating a software engineering task for repository ncclient/ncclient.
Problem Statement:
Release 0.6.8 xpath filter incompatible with previous releases
The following code used to work in 0.6.7 and earlier,
```
from ncclient import manager
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Now this code throws an error
```
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple.
Please consider making this backward compatible, and announce such major changes before releasing it.
## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns
## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.
## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./Changelog
./LICENSE
./MANIFEST.in
./NOTICE
./README.md
./README.rst
./docs
./examples
./ncclient
./ncclient/__init__.py
./ncclient/_version.py
./ncclient/capabilities.py
./ncclient/debug.py
./ncclient/devices
./ncclient/devices/__init__.py
./ncclient/devices/alu.py
./ncclient/devices/csr.py
./ncclient/devices/default.py
./ncclient/devices/h3c.py
./ncclient/devices/hpcomware.py
./ncclient/devices/huawei.py
./ncclient/devices/huaweiyang.py
./ncclient/devices/iosxe.py
./ncclient/devices/iosxr.py
./ncclient/devices/junos.py
./ncclient/devices/nexus.py
./ncclient/logging_.py
./ncclient/manager.py
./ncclient/operations
./ncclient/operations/__init__.py
./ncclient/operations/edit.py
./ncclient/operations/errors.py
./ncclient/operations/flowmon.py
./ncclient/operations/lock.py
./ncclient/operations/retrieve.py
./ncclient/operations/rpc.py
./ncclient/operations/session.py
./ncclient/operations/subscribe.py
./ncclient/operations/third_party
./ncclient/operations/util.py
./ncclient/transport
./ncclient/transport/__init__.py
./ncclient/transport/errors.py
./ncclient/transport/notify.py
./ncclient/transport/parser.py
./ncclient/transport/session.py
./ncclient/transport/ssh.py
./ncclient/transport/third_party
./ncclient/xml_.py
./requirements.txt
./setup.cfg
./setup.py
./test
./test-requirements.txt
./test/__init__.py
./test/unit
./test/unit/__init__.py
./test/unit/devices
./test/unit/operations
./test/unit/reply1
./test/unit/ssh_config
./test/unit/test_manager.py
./test/unit/test_xml_.py
./test/unit/transport
./tox.ini
./versioneer.py
```
Turn 1at 31 s506 tokens out3,280 prompt tokens
The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)` (where `path` is a string) now fails with a `ValueError: too many values to unpack (expected 2)`.
The traceback indicates the error occurs in `ncclient/operations/util.py` in the `build_filter` function.
Looking at the traceback:
```
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
It seems `util.build_filter` expects `criteria` to be a sequence (likely a tuple) of length 2, but it's receiving something else (probably the XPath string itself).
Wait, if `path` is a string, say `'/a/b/c'`, then `criteria` would be `'/a/b/c'`.
`ns, select = '/a/b/c'` would try to unpack the string, which has 6 characters, so it fails with "too many values to unpack (expected 2)".
If it were a string of length 2, it would "work" but probably not as intended.
The user says:
```python
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
In `m.get('xpath', path)`, the first argument `'xpath'` probably tells `get` to use an XPath filter.
Let's examine `ncclient/operations/util.py` around line 53.
TOOL CALL · run_command
{
"command": "grep -rn \"def build_filter\" ncclient/operations/util.py"
}Result of run_command 103 characters
{
"status": "ok",
"stdout": "48:def build_filter(spec, capcheck=None):\n",
"stderr": "",
"exit_code": 0
}Turn 2at 35 s62 tokens out3,841 prompt tokens
Okay, `build_filter` is defined at line 48. Let's read the code around there.
TOOL CALL · read_file
{
"end_line": 70,
"filepath": "ncclient/operations/util.py",
"start_line": 40
}Result of read_file 1,381 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"content": " # capcheck(':candidate')\n #elif loc == 'startup':\n # capcheck(':startup')\n #elif loc == 'running' and wha == 'target':\n # capcheck(':writable-running')\n sub_ele(node, loc)\n return node\n\ndef build_filter(spec, capcheck=None):\n type = None\n if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n ns, select = criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n rep = new_ele(\"filter\", type=type)\n rep.append(to_ele(criteria))\n else:\n raise OperationError(\"Invalid filter type\")\n elif isinstance(spec, list):\n rep = new_ele(\"filter\", type=\"subtree\")\n for cri in spec:\n rep.append(to_ele(cri))\n else:\n\n rep = validated_element(spec, (\"filter\", qualify(\"filter\"),\n qualify(\"filter\", ns=NETCONF_NOTIFICATION_NS)))\n # results in XMLError: line 105 ncclient/xml_.py - commented by earies - 5/10/13\n #rep = validated_element(spec, (\"filter\", qualify(\"filter\")),",
"start_line": 40,
"end_line": 70,
"total_lines": 81,
"is_truncated": false
}Turn 3at 77 s658 tokens out4,331 prompt tokens
Wait, the code I see in `build_filter` is:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
else:
raise OperationError("Invalid filter type")
elif isinstance(spec, list):
rep = new_ele("filter", type="subtree")
for cri in spec:
rep.append(to_ele(cri))
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
If `spec` is a tuple `('xpath', '/a/b/c')`, then `type` is `'xpath'` and `criteria` is `'/a/b/c'`.
Then it does `ns, select = criteria`.
If `criteria` is `'/a/b/c'`, this will fail with `ValueError: too many values to unpack (expected 2)`.
This is exactly what the user reported.
It seems that in 0.6.8, `build_filter` expects `criteria` to be a tuple `(ns, select)` when `type == 'xpath'`.
Wait, if `criteria` is supposed to be `(ns, select)`, then `spec` should be `('xpath', (ns, select))`.
But the user says:
```python
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Let's see how `m.get` calls `build_filter`.
`m.get` is in `ncclient/manager.py`.
The traceback says:
`File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute` -> `return cls(self._session,`
`File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request` -> `node.append(util.build_filter(filter))`
So `m.get` calls `Retrieve.request` (since `get` is probably mapped to `Retrieve` operation).
Let's look at `ncclient/manager.py` around line 226 and `ncclient/operations/retrieve.py` around line 83.
TOOL CALL · run_command
{
"command": "grep -n \"def get\" ncclient/manager.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 4at 83 s87 tokens out5,045 prompt tokens
Maybe it's not `def get`. Let me search for `get` in `ncclient/manager.py`. Actually, let's look at `ncclient/operations/retrieve.py` line 83 first.
TOOL CALL · read_file
{
"end_line": 90,
"filepath": "ncclient/operations/retrieve.py",
"start_line": 70
}Result of read_file 989 characters
{
"status": "ok",
"filepath": "ncclient/operations/retrieve.py",
"content": " \"See :class:`GetReply`.\"\n\n def request(self, filter=None, with_defaults=None):\n \"\"\"Retrieve running configuration and device state information.\n\n *filter* specifies the portion of the configuration to retrieve (by default entire configuration is retrieved)\n\n *with_defaults* defines an explicit method of retrieving default values from the configuration (see :rfc:`6243`)\n\n :seealso: :ref:`filter_params`\n \"\"\"\n node = new_ele(\"get\")\n if filter is not None:\n node.append(util.build_filter(filter))\n if with_defaults is not None:\n self._assert(\":with-defaults\")\n _append_with_defaults_mode(\n node,\n with_defaults,\n self._session.server_capabilities,\n )",
"start_line": 70,
"end_line": 90,
"total_lines": 239,
"is_truncated": false
}Turn 5at 90 s115 tokens out5,413 prompt tokens
Okay, so `Retrieve.request` calls `util.build_filter(filter)`.
Now let's see how `manager.connect(...).get()` calls `Retrieve.request`.
Actually, the user said `m.get('xpath', path)`.
Wait, `m.get` is likely a method of `Manager`.
Let's look at `ncclient/manager.py`.
TOOL CALL · run_command
{
"command": "grep -n \"def get\" ncclient/manager.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 6at 98 s93 tokens out5,583 prompt tokens
That's strange. Maybe it's inherited? Let's check `ncclient/manager.py` for any methods. Wait, maybe `manager.connect` returns an object that has a `get` method. Let's search for `get(` in `ncclient/manager.py`.
TOOL CALL · run_command
{
"command": "grep -n \"get(\" ncclient/manager.py"
}Result of run_command 368 characters
{
"status": "ok",
"stdout": "71: handler = device_params.get('handler', None)\n75: device_name = device_params.get(\"name\", \"default\")\n163: device_params = kwds.get('device_params', {})\n164: if host == 'localhost' and device_params.get('name') == 'junos' \\\n165: and device_params.get('local'):\n",
"stderr": "",
"exit_code": 0
}Turn 7at 104 s77 tokens out5,817 prompt tokens
None of these are a `get` method. Wait, `manager.connect(...) as m:`. `m` is an instance of `Manager`. Let's look at `ncclient/manager.py` structure.
TOOL CALL · run_command
{
"command": "grep -n \"class Manager\" ncclient/manager.py"
}Result of run_command 88 characters
{
"status": "ok",
"stdout": "171:class Manager(object):\n",
"stderr": "",
"exit_code": 0
}Turn 8at 107 s54 tokens out5,942 prompt tokens
Let's look at the methods of `Manager` class.
TOOL CALL · run_command
{
"command": "grep \"def \" ncclient/manager.py | grep -B 0 \"Manager\" -A 100"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 9at 110 s51 tokens out6,051 prompt tokens
I'll just read `ncclient/manager.py` starting from line 171.
TOOL CALL · read_file
{
"filepath": "ncclient/manager.py",
"start_line": 171
}Result of read_file 5,072 characters
{
"status": "ok",
"filepath": "ncclient/manager.py",
"content": "class Manager(object):\n\n \"\"\"\n For details on the expected behavior of the operations and their\n parameters refer to :rfc:`6241`.\n\n Manager instances are also context managers so you can use it like this::\n\n with manager.connect(\"host\") as m:\n # do your stuff\n\n ... or like this::\n\n m = manager.connect(\"host\")\n try:\n # do your stuff\n finally:\n m.close_session()\n \"\"\"\n\n # __metaclass__ = OpExecutor\n\n\n HUGE_TREE_DEFAULT = False\n \"\"\"Default for `huge_tree` support for XML parsing of RPC replies (defaults to False)\"\"\"\n\n def __init__(self, session, device_handler, timeout=30):\n self._session = session\n self._async_mode = False\n self._timeout = timeout\n self._raise_mode = operations.RaiseMode.ALL\n self._huge_tree = self.HUGE_TREE_DEFAULT\n self._device_handler = device_handler\n self._vendor_operations = {}\n if device_handler:\n self._vendor_operations.update(device_handler.add_additional_operations())\n\n def __enter__(self):\n return self\n\n def __exit__(self, *args):\n self.close_session()\n return False\n\n def __set_timeout(self, timeout):\n self._timeout = timeout\n\n def __set_async_mode(self, mode):\n self._async_mode = mode\n\n def __set_raise_mode(self, mode):\n assert(mode in (operations.RaiseMode.NONE, operations.RaiseMode.ERRORS, operations.RaiseMode.ALL))\n self._raise_mode = mode\n\n def execute(self, cls, *args, **kwds):\n return cls(self._session,\n device_handler=self._device_handler,\n async_mode=self._async_mode,\n timeout=self._timeout,\n raise_mode=self._raise_mode,\n huge_tree=self._huge_tree).request(*args, **kwds)\n\n def locked(self, target):\n \"\"\"Returns a context manager for a lock on a datastore, where\n *target* is the name of the configuration datastore to lock, e.g.::\n\n with m.locked(\"running\"):\n # do your stuff\n\n ... instead of::\n\n m.lock(\"running\")\n try:\n # do your stuff\n finally:\n m.unlock(\"running\")\n \"\"\"\n return operations.LockContext(self._session, self._device_handler, target)\n\n def scp(self):\n return self._session.scp()\n\n def session(self):\n raise NotImplementedError\n\n def __getattr__(self, method):\n if method in self._vendor_operations:\n return functools.partial(self.execute, self._vendor_operations[method])\n elif method in OPERATIONS:\n return functools.partial(self.execute, OPERATIONS[method])\n else:\n \"\"\"Parse args/kwargs correctly in order to build XML element\"\"\"\n def _missing(*args, **kwargs):\n m = method.replace('_', '-')\n root = new_ele(m)\n if args:\n for arg in args:\n sub_ele(root, arg)\n r = self.rpc(root)\n return r\n return _missing\n\n def take_notification(self, block=True, timeout=None):\n \"\"\"Attempt to retrieve one notification from the queue of received\n notifications.\n\n If block is True, the call will wait until a notification is\n received.\n\n If timeout is a number greater than 0, the call will wait that\n many seconds to receive a notification before timing out.\n\n If there is no notification available when block is False or\n when the timeout has elapse, None will be returned.\n\n Otherwise a :class:`~ncclient.operations.notify.Notification`\n object will be returned.\n \"\"\"\n return self._session.take_notification(block, timeout)\n\n @property\n def client_capabilities(self):\n \"\"\":class:`~ncclient.capabilities.Capabilities` object representing\n the client's capabilities.\"\"\"\n return self._session._client_capabilities\n\n @property\n def server_capabilities(self):\n \"\"\":class:`~ncclient.capabilities.Capabilities` object representing\n the server's capabilities.\"\"\"\n return self._session._server_capabilities\n\n @property\n def channel_id(self):\n return self._session._channel_id\n\n @property\n def channel_name(self):\n return self._session._channel_name\n\n @property\n def session_id(self):\n \"\"\"`session-id` assigned by the NETCONF server.\"\"\"\n return self._session.id\n\n @property\n def connected(self):\n \"\"\"Whether currently connected to the NETCONF server.\"\"\"\n return self._session.connected\n",
"start_line": 171,
"end_line": 320,
"total_lines": 344,
"is_truncated": true
}Turn 10at 210 s1,506 tokens out7,488 prompt tokens
I see `__getattr__` in `Manager`.
```python
def __getattr__(self, method):
if method in self._vendor_operations:
return functools.partial(self.execute, self._vendor_operations[method])
elif method in OPERATIONS:
return functools.partial(self.execute, OPERATIONS[method])
else:
# ...
```
`OPERATIONS` must be a mapping from operation name (like `'get'`) to the operation class (like `Retrieve`).
The user calls `m.get('xpath', path)`.
This calls `self.execute(OPERATIONS['get'], 'xpath', path)`.
`execute` is:
```python
def execute(self, cls, *args, **kwds):
return cls(self._session,
device_handler=self._device_handler,
async_mode=self._async_mode,
timeout=self._timeout,
raise_mode=self._raise_mode,
huge_tree=self._huge_tree).request(*args, **kwds)
```
So it calls `Retrieve(self._session, ...).request('xpath', path)`.
In `Retrieve.request(self, filter=None, with_defaults=None)`, `'xpath'` becomes the `filter` argument and `path` becomes the `with_defaults` argument.
Wait!
User's code: `reply = m.get('xpath', path)`
`Retrieve.request` signature: `def request(self, filter=None, with_defaults=None):`
So `filter` gets `'xpath'` and `with_defaults` gets `path`.
Then `node.append(util.build_filter(filter))` is called with `filter='xpath'`.
If `filter` is `'xpath'`, in `build_filter(spec)`:
`spec` is `'xpath'`.
`isinstance('xpath', tuple)` is False.
`isinstance('xpath', list)` is False.
It goes to the `else` block:
```python
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
And `validated_element('xpath', ...)` will be called.
But the traceback says:
```
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
Line 53 in `ncclient/operations/util.py` is:
```python
ns, select = criteria
```
This is inside `if isinstance(spec, tuple):` and `if type == "xpath":`.
So for this line to be reached, `spec` MUST be a tuple.
And `type` (the first element of `spec`) MUST be `"xpath"`.
Wait, if the user calls `m.get('xpath', path)`, and `m.get` is `functools.partial(self.execute, OPERATIONS['get'])`, then `m.get('xpath', path)` calls `self.execute(OPERATIONS['get'], 'xpath', path)`.
And `execute` calls `Retrieve(...).request('xpath', path)`.
If `Retrieve.request` is defined as `def request(self, filter=None, with_defaults=None):`, then `filter` is `'xpath'` and `with_defaults` is `path`.
Wait, if `filter` is just the string `'xpath'`, then `build_filter('xpath')` would NOT enter the `if isinstance(spec, tuple)` block.
Is it possible that `m.get` is NOT what I think it is?
Wait, I missed something.
Look at the user's provided ERROR traceback:
```
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
```
AHA! The user's code in the description is:
```python
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
BUT the traceback says:
```python
reply = m.get(filter=('xpath', path))
```
If the user calls `m.get(filter=('xpath', path))`, then `Retrieve.request` is called with `filter=('xpath', path)`.
Then `util.build_filter(('xpath', path))` is called.
In `build_filter`:
`spec` is `('xpath', path)`.
`isinstance(spec, tuple)` is True.
`type, criteria = spec` -> `type` is `'xpath'`, `criteria` is `path`.
Then `if type == "xpath":` is True.
`ns, select = criteria` -> `ns, select = path`.
If `path` is `'/a/b/c'`, this fails with `ValueError: too many values to unpack (expected 2)`.
So the bug is that `build_filter` expects `criteria` to be a tuple `(ns, select)` when `type == "xpath"`, but it should also accept a simple string (treating it as the `select` and perhaps using a default or no `ns`).
Wait, if `criteria` is a string, it should be treated as the `select` value.
Let's look at `build_filter` again.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
If `criteria` is just a string, `ns, select = criteria` fails.
If `criteria` is a tuple `(ns, select)`, it works.
The user says "The path parameter in 0.6.7 used to be a string".
So in 0.6.7, `criteria` was allowed to be a string.
If `criteria` is a string, what should `ns` be?
Probably `None` or an empty dict.
Let's see what `new_ele_nsmap` does.
I'll search for `new_ele_nsmap` in `ncclient/operations/util.py`.
TOOL CALL · run_command
{
"command": "grep -n \"def new_ele_nsmap\" ncclient/operations/util.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 11at 215 s59 tokens out9,049 prompt tokens
Maybe it's imported? Let's check imports in `ncclient/operations/util.py`.
TOOL CALL · read_file
{
"end_line": 30,
"filepath": "ncclient/operations/util.py",
"start_line": 1
}Result of read_file 1,268 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"content": "# Copyright 2009 Shikhar Bhushan\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\n'Boilerplate ugliness'\n\nfrom ncclient.xml_ import *\n\nfrom ncclient.operations.errors import OperationError, MissingCapabilityError\n\ndef one_of(*args):\n \"Verifies that only one of the arguments is not None\"\n for i, arg in enumerate(args):\n if arg is not None:\n for argh in args[i+1:]:\n if argh is not None:\n raise OperationError(\"Too many parameters\")\n else:\n return\n raise OperationError(\"Insufficient parameters\")",
"start_line": 1,
"end_line": 30,
"total_lines": 81,
"is_truncated": false
}Turn 12at 217 s59 tokens out9,466 prompt tokens
It's imported from `ncclient.xml_`. Let's check `ncclient/xml_.py`.
TOOL CALL · run_command
{
"command": "grep -n \"def new_ele_nsmap\" ncclient/xml_.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 13at 220 s60 tokens out9,580 prompt tokens
Wait, maybe it's `new_ele_ns` or something? Let's search for `def` in `ncclient/xml_.py`.
TOOL CALL · run_command
{
"command": "grep \"def \" ncclient/xml_.py"
}Result of run_command 612 characters
{
"status": "ok",
"stdout": "def _get_parser(huge_tree=False):\n def register_namespace(prefix, uri):\ndef to_xml(ele, encoding=\"UTF-8\", pretty_print=False):\ndef to_ele(x, huge_tree=False):\ndef parse_root(raw):\ndef validated_element(x, tags=None, attrs=None):\n def __init__(self, result, transform_reply, huge_tree=False):\n def xpath(self, expression):\n def find(self, expression):\n def findtext(self, expression):\n def __str__(self):\n def tostring(self):\n def data_xml(self):\n def remove_namespaces(self, rpc_reply):\ndef parent_ns(node):\n",
"stderr": "",
"exit_code": 0
}Turn 14at 224 s63 tokens out9,850 prompt tokens
I don't see `new_ele_nsmap` there. Wait, let's search for `nsmap` in `ncclient/xml_.py`.
TOOL CALL · run_command
{
"command": "grep \"nsmap\" ncclient/xml_.py"
}Result of run_command 206 characters
{
"status": "ok",
"stdout": " return node.nsmap[node.prefix]\nnew_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)\n",
"stderr": "",
"exit_code": 0
}Turn 15at 266 s639 tokens out10,000 prompt tokens
Aha! It's a lambda:
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
So `nsmap` is the second argument.
Back to `build_filter` in `ncclient/operations/util.py`:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
The `type=type` in `new_ele_nsmap("filter", ns, type=type)` is passed as `**extra`, so it becomes an attribute of the element?
No, `etree.Element` doesn't take a `type` keyword argument like that in lxml unless it's part of `attrs`.
Wait, `new_ele_nsmap` definition: `lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
Wait, `etree.Element` signature is `etree.Element(tag, attrib=None, nsmap=None, **extra)`.
So `new_ele_nsmap("filter", ns, type=type)` results in:
`tag = qualify("filter")`
`attrs = {}` (default)
`nsmap = ns`
`**extra = {'type': type}`
So `etree.Element(qualify("filter"), {}, ns, type=type)`.
Actually, `etree.Element` doesn't take `type` as a keyword argument.
Wait, maybe it's an older version of lxml or I'm misremembering.
Regardless, the issue is the unpacking of `criteria`.
If the user provides `criteria` as a string, we should handle it.
If `criteria` is a string, we can assume `ns` is `None` (or `{}`) and `select` is the string.
Let's try to reproduce this.
I need a mock of `manager.connect` or just call `build_filter` directly.
Since I have the source, I can just run a python script.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom ncclient.operations import util\ntry:\n # This is what 0.6.8 does if criteria is a string\n # Spec is a tuple ('xpath', '/a/b/c')\n util.build_filter(('xpath', '/a/b/c'))\n print(\"Success\")\nexcept ValueError as e:\n print(f\"Caught expected ValueError: {e}\")\nexcept Exception as e:\n print(f\"Caught unexpected exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 462 characters
{
"status": "ok",
"stdout": "Caught expected ValueError: too many values to unpack (expected 2)\n",
"stderr": "/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n from cryptography.hazmat.backends import default_backend\n",
"exit_code": 0
}Turn 16at 301 s580 tokens out10,779 prompt tokens
Perfect, reproduced.
Now, how should we fix it?
In `build_filter`, if `type == "xpath"`, we should check if `criteria` is a tuple or a string.
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, what if `criteria` was something else? The user said it used to be a string.
If it's not a tuple, we can assume it's the `select` string.
Let's check if there are other places where `criteria` is used this way.
In `build_filter`:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
```
For `subtree`, `criteria` is passed to `to_ele`.
Let's see if we should use `None` or `{}` for `ns`.
`new_ele_nsmap` uses `nsmap` as the second argument to `etree.Element`.
If `ns` is `None`, `etree.Element` handles it fine.
Let's refine the fix.
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
But wait, if `criteria` is supposed to be a tuple `(ns, select)`, then `ns` should be a dictionary mapping prefixes to URIs.
If the user provides just a string, they are providing the XPath expression.
If they wanted to provide namespaces, they would provide a tuple.
Is there any other way they could provide namespaces?
Maybe. But based on the issue report, the string was the primary way.
Let's check if there are any tests that use `build_filter` with `xpath`.
I'll search for `xpath` in `test/`.
TOOL CALL · run_command
{
"command": "grep -rn \"xpath\" test/ | grep \"build_filter\""
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 17at 304 s46 tokens out11,414 prompt tokens
No direct hits. Let's just search for `build_filter` in `test/`.
TOOL CALL · run_command
{
"command": "grep -rn \"build_filter\" test/"
}Result of run_command 1,077 characters
{
"status": "ok",
"stdout": "test/unit/operations/test_retrieve.py:30: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:199: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:218: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:256: node.append(util.build_filter(multi_subtree_filters))\ntest/unit/operations/test_utils.py:55: def test_build_filter(self):\ntest/unit/operations/test_utils.py:56: reply = build_filter(xml)\ntest/unit/operations/test_utils.py:60: def test_build_filter_2(self):\ntest/unit/operations/test_utils.py:65: reply = build_filter(filter)\ntest/unit/operations/test_utils.py:71: def test_build_filter_3(self):\ntest/unit/operations/test_utils.py:78: reply = build_filter(filter, capcheck=\"cap\")\ntest/unit/operations/test_utils.py:84: def test_build_filter_4(self):\ntest/unit/operations/test_utils.py:92: build_filter, filter, capcheck=\"cap\")\n",
"stderr": "",
"exit_code": 0
}Turn 18at 306 s45 tokens out11,847 prompt tokens
Let's look at `test/unit/operations/test_utils.py`.
TOOL CALL · read_file
{
"filepath": "test/unit/operations/test_utils.py"
}Result of read_file 3,193 characters
{
"status": "ok",
"filepath": "test/unit/operations/test_utils.py",
"content": "import unittest\nfrom xml.etree import ElementTree\nfrom ncclient.operations.util import *\nfrom mock import MagicMock\n\nxml = \"\"\"<filter type=\"xpath\">\n <configuration>\n <system>\n <services/>\n </system>\n </configuration>\n </filter>\"\"\"\n\n\nclass TestUtils(unittest.TestCase):\n\n def test_one_of_1(self):\n self.assertEqual(one_of(None, 10, None), None)\n\n def test_one_of_2(self):\n self.assertRaises(OperationError,\n one_of, None, 10, 10)\n\n def test_one_of_3(self):\n self.assertRaises(OperationError,\n one_of, None, None)\n\n def test_datastore_url(self):\n node = new_ele(\"target\")\n sub_ele(node, \"candidate\")\n result = ElementTree.tostring(\n datastore_or_url(\n \"target\",\n \"candidate\"))\n self.assertEqual(result, ElementTree.tostring(node))\n\n def test_datastore_url_2(self):\n node = new_ele(\"web\")\n sub_ele(node, \"url\").text = \"http://juniper.net\"\n result = ElementTree.tostring(\n datastore_or_url(\n \"web\",\n \"http://juniper.net\",\n capcheck=MagicMock()))\n self.assertEqual(result, ElementTree.tostring(node))\n\n def test_datastore_url_3(self):\n node = new_ele(\"web\")\n result = ElementTree.tostring(\n datastore_or_url(\n \"web\",\n \"http://juniper.net\"))\n self.assertEqual(result, ElementTree.tostring(node))\n\n def test_build_filter(self):\n reply = build_filter(xml)\n call = ElementTree.tostring(reply)\n self.assertEqual(call, ElementTree.tostring(to_ele(xml)))\n\n def test_build_filter_2(self):\n select = \"configuration/system\"\n ns = {\"ns0\": \"http://www.xxx.org\"}\n criteria = (ns, select)\n filter = (\"xpath\", criteria)\n reply = build_filter(filter)\n call = ElementTree.tostring(reply)\n node = new_ele_nsmap(\"filter\", ns, type=\"xpath\")\n node.attrib[\"select\"] = select\n self.assertEqual(call, ElementTree.tostring(node))\n\n def test_build_filter_3(self):\n criteria = \"\"\"<configuration>\n <system>\n <services/>\n </system>\n </configuration>\"\"\"\n filter = (\"subtree\", criteria)\n reply = build_filter(filter, capcheck=\"cap\")\n call = ElementTree.tostring(reply)\n node = new_ele(\"filter\", type=\"subtree\")\n node.append(to_ele(criteria))\n self.assertEqual(call, ElementTree.tostring(node))\n\n def test_build_filter_4(self):\n criteria = \"\"\"<configuration>\n <system>\n <services/>\n </system>\n </configuration>\"\"\"\n filter = (\"text\", criteria)\n self.assertRaises(OperationError,\n build_filter, filter, capcheck=\"cap\")",
"start_line": 1,
"end_line": 92,
"total_lines": 92,
"is_truncated": false
}Turn 19at 341 s686 tokens out12,860 prompt tokens
In `test_build_filter_2`:
```python
def test_build_filter_2(self):
select = "configuration/system"
ns = {"ns0": "http://www.xxx.org"}
criteria = (ns, select)
filter = ("xpath", criteria)
reply = build_filter(filter)
```
This confirms that the currently expected way to pass an XPath filter is `('xpath', (ns, select))`.
The bug report says that in 0.6.7, `filter = ('xpath', select)` (where `select` is a string) worked.
So we should change `build_filter` to handle both cases.
Let's prepare the fix.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
else:
raise OperationError("Invalid filter type")
```
Wait, is `None` okay for `ns` in `new_ele_nsmap("filter", ns, type=type)`?
In `test_build_filter_2`, `ns` is a dict `{"ns0": "http://www.xxx.org"}`.
`new_ele_nsmap` calls `etree.Element(qualify(tag), attrs, nsmap, **extra)`.
If `nsmap` is `None`, `etree.Element` just doesn't add any namespaces. This should be correct.
Wait, I should double check if `etree.Element` supports `nsmap=None`. Yes it does.
Let's verify with a small test script.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom lxml import etree\ndef qualify(tag):\n return tag\ndef new_ele_nsmap(tag, nsmap, attrs={}, **extra):\n return etree.Element(qualify(tag), attrs, nsmap, **extra)\n\ndns = {\"ns0\": \"http://www.xxx.org\"}\nselect = \"configuration/system\"\n\n# Current expected behavior\nres1 = new_ele_nsmap(\"filter\", dns, type=\"xpath\")\nres1.attrib[\"select\"] = select\nprint(f\"Res1: {etree.tostring(res1)}\")\n\n# Proposed backward compatibility\nres2 = new_ele_nsmap(\"filter\", None, type=\"xpath\")\nres2.attrib[\"select\"] = select\nprint(f\"Res2: {etree.tostring(res2)}\")\nPY\n"
}Result of run_command 227 characters
{
"status": "ok",
"stdout": "Res1: b'<filter xmlns:ns0=\"http://www.xxx.org\" type=\"xpath\" select=\"configuration/system\"/>'\nRes2: b'<filter type=\"xpath\" select=\"configuration/system\"/>'\n",
"stderr": "",
"exit_code": 0
}Turn 20at 356 s325 tokens out13,635 prompt tokens
Yes, this looks correct. `Res2` is exactly what we want for a simple string path.
Now I will apply the fix to `ncclient/operations/util.py`.
Wait, the original code snippet in `read_file` was:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
I'll replace:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
with:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Let me double check the indentation and surroundings.
TOOL CALL · read_file
{
"end_line": 60,
"filepath": "ncclient/operations/util.py",
"start_line": 48
}Result of read_file 755 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"content": "def build_filter(spec, capcheck=None):\n type = None\n if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n ns, select = criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n rep = new_ele(\"filter\", type=type)\n rep.append(to_ele(criteria))\n else:\n raise OperationError(\"Invalid filter type\")",
"start_line": 48,
"end_line": 60,
"total_lines": 81,
"is_truncated": false,
"budget_warning": "Only 10 tool call(s) remaining (20/30 used). Finalize your edits and call submit_patch soon."
}Turn 21at 375 s370 tokens out14,204 prompt tokens
The original code:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Proposed replacement:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, what if `criteria` is not a tuple and not a string? The `ns, select = None, criteria` part will just assign whatever `criteria` is. If `criteria` is, say, an integer, then `rep.attrib["select"] = select` might fail because lxml expects a string for attributes. But since the user said it's supposed to be a string, this should be fine.
Let's apply the fix.
TOOL CALL · edit_file
{
"filepath": "ncclient/operations/util.py",
"new_string": " if type == \"xpath\":\n if isinstance(criteria, tuple):\n ns, select = criteria\n else:\n ns, select = None, criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select",
"old_string": " if type == \"xpath\":\n ns, select = criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select"
}Result of edit_file 765 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"occurrences": 1,
"strategy": "exact",
"diff": "--- a/ncclient/operations/util.py\n+++ b/ncclient/operations/util.py\n@@ -50,7 +50,10 @@\n if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n- ns, select = criteria\n+ if isinstance(criteria, tuple):\n+ ns, select = criteria\n+ else:\n+ ns, select = None, criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n",
"is_truncated": false,
"budget_warning": "Only 9 tool call(s) remaining (21/30 used). Finalize your edits and call submit_patch soon."
}Turn 22at 384 s182 tokens out14,821 prompt tokens
Now let's verify the fix with a reproduction script and run the existing tests. Reproduction script:
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom ncclient.operations import util\ntry:\n # Case 1: String path (the reported bug)\n util.build_filter(('xpath', '/a/b/c'))\n print(\"Case 1 (string path) success\")\n \n # Case 2: Tuple path (existing functionality)\n util.build_filter(('xpath', ({'ns0': 'uri'}, '/a/b/c')))\n print(\"Case 2 (tuple path) success\")\nexcept Exception as e:\n print(f\"Caught exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 566 characters
{
"status": "ok",
"stdout": "Case 1 (string path) success\nCase 2 (tuple path) success\n",
"stderr": "/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n from cryptography.hazmat.backends import default_backend\n",
"exit_code": 0,
"budget_warning": "Only 8 tool call(s) remaining (22/30 used). Finalize your edits and call submit_patch soon."
}Turn 23at 420 s72 tokens out4,028 prompt tokens
The reproduction script now passes for both cases. Now I should run the existing tests for `ncclient.operations` to make sure I didn't break anything. I'll look for tests related to filters or operations.
TOOL CALL · run_command
{
"command": "grep -rn \"build_filter\" tests/"
}Result of run_command 322 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "grep: tests/: No such file or directory\n",
"details": {
"stdout": "",
"stderr": "grep: tests/: No such file or directory\n",
"exit_code": 2
},
"budget_warning": "Only 7 tool call(s) remaining (23/30 used). Finalize your edits and call submit_patch soon."
}Turn 24at 425 s59 tokens out4,214 prompt tokens
Wait, I forgot to check the workspace layout. I should check if the tests are in `tests/` or `test/` or something else.
TOOL CALL · run_command
{
"command": "find . -maxdepth 2 -name \"*test*\""
}Result of run_command 206 characters
{
"status": "ok",
"stdout": "./test-requirements.txt\n./test\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 6 tool call(s) remaining (24/30 used). Finalize your edits and call submit_patch soon."
}Turn 25at 427 s40 tokens out4,357 prompt tokens
Ah, it's in `./test`. Let me grep there.
TOOL CALL · run_command
{
"command": "grep -rn \"build_filter\" test/"
}Result of run_command 1,190 characters
{
"status": "ok",
"stdout": "test/unit/operations/test_retrieve.py:30: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:199: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:218: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:256: node.append(util.build_filter(multi_subtree_filters))\ntest/unit/operations/test_utils.py:55: def test_build_filter(self):\ntest/unit/operations/test_utils.py:56: reply = build_filter(xml)\ntest/unit/operations/test_utils.py:60: def test_build_filter_2(self):\ntest/unit/operations/test_utils.py:65: reply = build_filter(filter)\ntest/unit/operations/test_utils.py:71: def test_build_filter_3(self):\ntest/unit/operations/test_utils.py:78: reply = build_filter(filter, capcheck=\"cap\")\ntest/unit/operations/test_utils.py:84: def test_build_filter_4(self):\ntest/unit/operations/test_utils.py:92: build_filter, filter, capcheck=\"cap\")\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 5 tool call(s) remaining (25/30 used). Finalize your edits and call submit_patch soon."
}Turn 26at 431 s80 tokens out4,819 prompt tokens
I'll run `test/unit/operations/test_utils.py` and `test/unit/operations/test_retrieve.py`.
TOOL CALL · run_command
{
"command": "pytest test/unit/operations/test_utils.py test/unit/operations/test_retrieve.py -q --tb=short --no-header"
}Result of run_command 1,330 characters
{
"status": "ok",
"stdout": "============================= test session starts ==============================\ncollected 22 items\n\ntest/unit/operations/test_utils.py .......... [ 45%]\ntest/unit/operations/test_retrieve.py ............ [100%]\n\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32\n /opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n from cryptography.hazmat.backends import default_backend\n\ntest/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported\n /workspace/test/unit/operations/test_retrieve.py:99: DeprecationWarning: Please use assertRaisesRegex instead.\n with_defaults='report-all-tagged'\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n======================== 22 passed, 2 warnings in 0.07s ========================\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 4 tool call(s) remaining (26/30 used). Finalize your edits and call submit_patch soon."
}Turn 27at 437 s70 tokens out5,283 prompt tokens
All tests passed. I have successfully reproduced the issue (via script), fixed it, and verified the fix with the reproduction script and the existing test suite. I will now check `git status --short && git diff` for hygiene.
TOOL CALL · run_command
{
"command": "git status --short && git diff"
}Result of run_command 866 characters
{
"status": "ok",
"stdout": " M ncclient/operations/util.py\ndiff --git a/ncclient/operations/util.py b/ncclient/operations/util.py\nindex 0d1bb38..46dd4aa 100755\n--- a/ncclient/operations/util.py\n+++ b/ncclient/operations/util.py\n@@ -50,7 +50,10 @@ def build_filter(spec, capcheck=None):\n if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n- ns, select = criteria\n+ if isinstance(criteria, tuple):\n+ ns, select = criteria\n+ else:\n+ ns, select = None, criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 3 tool call(s) remaining (27/30 used). Finalize your edits and call submit_patch soon."
}Turn 28at 438 s21 tokens out5,649 prompt tokens
Everything looks clean. I am ready to submit.
TOOL CALL · submit_patch
Result of submit_patch 55 characters
{
"status": "ok",
"patch_size": 637,
"files_changed": 1
}Turn 29at 449 s140 tokens out5,709 prompt tokens
I have fixed the regression in `ncclient/operations/util.py` where `build_filter` failed when `criteria` for an `"xpath"` filter was a string instead of a tuple. I added a check to handle both cases, ensuring backward compatibility while maintaining current functionality. All relevant tests passed.
Turn 30at 449 s
The `build_filter` function in `ncclient/operations/util.py` was updated to handle both string and tuple inputs for XPath criteria, fixing a regression that caused a `ValueError` when a string was provided. This ensures that `m.get()` can correctly process XPath filters as strings, maintaining backward compatibility with version 0.6.7.
Model calls (not matched to turns)
Generated tokens 506 tokens · stopped: STOP
The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)` (where `path` is a string) now fails with a `ValueError: too many values to unpack (expected 2)`.
The traceback indicates the error occurs in `ncclient/operations/util.py` in the `build_filter` function.
Looking at the traceback:
```
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
It seems `util.build_filter` expects `criteria` to be a sequence (likely a tuple) of length 2, but it's receiving something else (probably the XPath string itself).
Wait, if `path` is a string, say `'/a/b/c'`, then `criteria` would be `'/a/b/c'`.
`ns, select = '/a/b/c'` would try to unpack the string, which has 6 characters, so it fails with "too many values to unpack (expected 2)".
If it were a string of length 2, it would "work" but probably not as intended.
The user says:
```python
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
In `m.get('xpath', path)`, the first argument `'xpath'` probably tells `get` to use an XPath filter.
Let's examine `ncclient/operations/util.py` around line 53.<|channel>thought
The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)` (where `path` is a string) now fails with a `ValueError: too many values to unpack (expected 2)`.
The traceback indicates the error occurs in `ncclient/operations/util.py` in the `build_filter` function.
Looking at the traceback:
```
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
It seems `util.build_filter` expects `criteria` to be a sequence (likely a tuple) of length 2, but it's receiving something else (probably the XPath string itself).
Wait, if `path` is a string, say `'/a/b/c'`, then `criteria` would be `'/a/b/c'`.
`ns, select = '/a/b/c'` would try to unpack the string, which has 6 characters, so it fails with "too many values to unpack (expected 2)".
If it were a string of length 2, it would "work" but probably not as intended.
The user says:
```python
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
In `m.get('xpath', path)`, the first argument `'xpath'` probably tells `get` to use an XPath filter.
Let's examine `ncclient/operations/util.py` around line 53.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def build_filter" ncclient/operations/util.py<|"|>}<tool_call|><|tool_response>
Generated tokens 62 tokens · stopped: STOP
Okay, `build_filter` is defined at line 48. Let's read the code around there.
Okay, `build_filter` is defined at line 48. Let's read the code around there.
<channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:40,end_line:70}<tool_call|><|tool_response>
Generated tokens 658 tokens · stopped: STOP
Wait, the code I see in `build_filter` is:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
else:
raise OperationError("Invalid filter type")
elif isinstance(spec, list):
rep = new_ele("filter", type="subtree")
for cri in spec:
rep.append(to_ele(cri))
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
If `spec` is a tuple `('xpath', '/a/b/c')`, then `type` is `'xpath'` and `criteria` is `'/a/b/c'`.
Then it does `ns, select = criteria`.
If `criteria` is `'/a/b/c'`, this will fail with `ValueError: too many values to unpack (expected 2)`.
This is exactly what the user reported.
It seems that in 0.6.8, `build_filter` expects `criteria` to be a tuple `(ns, select)` when `type == 'xpath'`.
Wait, if `criteria` is supposed to be `(ns, select)`, then `spec` should be `('xpath', (ns, select))`.
But the user says:
```python
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Let's see how `m.get` calls `build_filter`.
`m.get` is in `ncclient/manager.py`.
The traceback says:
`File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute` -> `return cls(self._session,`
`File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request` -> `node.append(util.build_filter(filter))`
So `m.get` calls `Retrieve.request` (since `get` is probably mapped to `Retrieve` operation).
Let's look at `ncclient/manager.py` around line 226 and `ncclient/operations/retrieve.py` around line 83.Wait, the code I see in `build_filter` is:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
else:
raise OperationError("Invalid filter type")
elif isinstance(spec, list):
rep = new_ele("filter", type="subtree")
for cri in spec:
rep.append(to_ele(cri))
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
If `spec` is a tuple `('xpath', '/a/b/c')`, then `type` is `'xpath'` and `criteria` is `'/a/b/c'`.
Then it does `ns, select = criteria`.
If `criteria` is `'/a/b/c'`, this will fail with `ValueError: too many values to unpack (expected 2)`.
This is exactly what the user reported.
It seems that in 0.6.8, `build_filter` expects `criteria` to be a tuple `(ns, select)` when `type == 'xpath'`.
Wait, if `criteria` is supposed to be `(ns, select)`, then `spec` should be `('xpath', (ns, select))`.
But the user says:
```python
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Let's see how `m.get` calls `build_filter`.
`m.get` is in `ncclient/manager.py`.
The traceback says:
`File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute` -> `return cls(self._session,`
`File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request` -> `node.append(util.build_filter(filter))`
So `m.get` calls `Retrieve.request` (since `get` is probably mapped to `Retrieve` operation).
Let's look at `ncclient/manager.py` around line 226 and `ncclient/operations/retrieve.py` around line 83.<channel|><|tool_call>call:run_command{command:<|"|>grep -n "def get" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 87 tokens · stopped: STOP
Maybe it's not `def get`. Let me search for `get` in `ncclient/manager.py`. Actually, let's look at `ncclient/operations/retrieve.py` line 83 first.
Maybe it's not `def get`. Let me search for `get` in `ncclient/manager.py`.
Actually, let's look at `ncclient/operations/retrieve.py` line 83 first.
<channel|><|tool_call>call:read_file{end_line:90,filepath:<|"|>ncclient/operations/retrieve.py<|"|>,start_line:70}<tool_call|><|tool_response>
Generated tokens 115 tokens · stopped: STOP
Okay, so `Retrieve.request` calls `util.build_filter(filter)`.
Now let's see how `manager.connect(...).get()` calls `Retrieve.request`.
Actually, the user said `m.get('xpath', path)`.
Wait, `m.get` is likely a method of `Manager`.
Let's look at `ncclient/manager.py`.
Okay, so `Retrieve.request` calls `util.build_filter(filter)`.
Now let's see how `manager.connect(...).get()` calls `Retrieve.request`.
Actually, the user said `m.get('xpath', path)`.
Wait, `m.get` is likely a method of `Manager`.
Let's look at `ncclient/manager.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -n "def get" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 93 tokens · stopped: STOP
That's strange. Maybe it's inherited? Let's check `ncclient/manager.py` for any methods. Wait, maybe `manager.connect` returns an object that has a `get` method. Let's search for `get(` in `ncclient/manager.py`.
That's strange. Maybe it's inherited? Let's check `ncclient/manager.py` for any methods.
Wait, maybe `manager.connect` returns an object that has a `get` method.
Let's search for `get(` in `ncclient/manager.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -n "get(" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 77 tokens · stopped: STOP
None of these are a `get` method. Wait, `manager.connect(...) as m:`. `m` is an instance of `Manager`. Let's look at `ncclient/manager.py` structure.
None of these are a `get` method.
Wait, `manager.connect(...) as m:`. `m` is an instance of `Manager`.
Let's look at `ncclient/manager.py` structure.
<channel|><|tool_call>call:run_command{command:<|"|>grep -n "class Manager" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 54 tokens · stopped: STOP
Let's look at the methods of `Manager` class.
Let's look at the methods of `Manager` class.
<channel|><|tool_call>call:run_command{command:<|"|>grep "def " ncclient/manager.py | grep -B 0 "Manager" -A 100<|"|>}<tool_call|><|tool_response>
Generated tokens 51 tokens · stopped: STOP
I'll just read `ncclient/manager.py` starting from line 171.
I'll just read `ncclient/manager.py` starting from line 171.
<channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/manager.py<|"|>,start_line:171}<tool_call|><|tool_response>
Generated tokens 1,506 tokens · stopped: STOP
I see `__getattr__` in `Manager`.
```python
def __getattr__(self, method):
if method in self._vendor_operations:
return functools.partial(self.execute, self._vendor_operations[method])
elif method in OPERATIONS:
return functools.partial(self.execute, OPERATIONS[method])
else:
# ...
```
`OPERATIONS` must be a mapping from operation name (like `'get'`) to the operation class (like `Retrieve`).
The user calls `m.get('xpath', path)`.
This calls `self.execute(OPERATIONS['get'], 'xpath', path)`.
`execute` is:
```python
def execute(self, cls, *args, **kwds):
return cls(self._session,
device_handler=self._device_handler,
async_mode=self._async_mode,
timeout=self._timeout,
raise_mode=self._raise_mode,
huge_tree=self._huge_tree).request(*args, **kwds)
```
So it calls `Retrieve(self._session, ...).request('xpath', path)`.
In `Retrieve.request(self, filter=None, with_defaults=None)`, `'xpath'` becomes the `filter` argument and `path` becomes the `with_defaults` argument.
Wait!
User's code: `reply = m.get('xpath', path)`
`Retrieve.request` signature: `def request(self, filter=None, with_defaults=None):`
So `filter` gets `'xpath'` and `with_defaults` gets `path`.
Then `node.append(util.build_filter(filter))` is called with `filter='xpath'`.
If `filter` is `'xpath'`, in `build_filter(spec)`:
`spec` is `'xpath'`.
`isinstance('xpath', tuple)` is False.
`isinstance('xpath', list)` is False.
It goes to the `else` block:
```python
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
And `validated_element('xpath', ...)` will be called.
But the traceback says:
```
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
Line 53 in `ncclient/operations/util.py` is:
```python
ns, select = criteria
```
This is inside `if isinstance(spec, tuple):` and `if type == "xpath":`.
So for this line to be reached, `spec` MUST be a tuple.
And `type` (the first element of `spec`) MUST be `"xpath"`.
Wait, if the user calls `m.get('xpath', path)`, and `m.get` is `functools.partial(self.execute, OPERATIONS['get'])`, then `m.get('xpath', path)` calls `self.execute(OPERATIONS['get'], 'xpath', path)`.
And `execute` calls `Retrieve(...).request('xpath', path)`.
If `Retrieve.request` is defined as `def request(self, filter=None, with_defaults=None):`, then `filter` is `'xpath'` and `with_defaults` is `path`.
Wait, if `filter` is just the string `'xpath'`, then `build_filter('xpath')` would NOT enter the `if isinstance(spec, tuple)` block.
Is it possible that `m.get` is NOT what I think it is?
Wait, I missed something.
Look at the user's provided ERROR traceback:
```
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
```
AHA! The user's code in the description is:
```python
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
BUT the traceback says:
```python
reply = m.get(filter=('xpath', path))
```
If the user calls `m.get(filter=('xpath', path))`, then `Retrieve.request` is called with `filter=('xpath', path)`.
Then `util.build_filter(('xpath', path))` is called.
In `build_filter`:
`spec` is `('xpath', path)`.
`isinstance(spec, tuple)` is True.
`type, criteria = spec` -> `type` is `'xpath'`, `criteria` is `path`.
Then `if type == "xpath":` is True.
`ns, select = criteria` -> `ns, select = path`.
If `path` is `'/a/b/c'`, this fails with `ValueError: too many values to unpack (expected 2)`.
So the bug is that `build_filter` expects `criteria` to be a tuple `(ns, select)` when `type == "xpath"`, but it should also accept a simple string (treating it as the `select` and perhaps using a default or no `ns`).
Wait, if `criteria` is a string, it should be treated as the `select` value.
Let's look at `build_filter` again.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
If `criteria` is just a string, `ns, select = criteria` fails.
If `criteria` is a tuple `(ns, select)`, it works.
The user says "The path parameter in 0.6.7 used to be a string".
So in 0.6.7, `criteria` was allowed to be a string.
If `criteria` is a string, what should `ns` be?
Probably `None` or an empty dict.
Let's see what `new_ele_nsmap` does.
I'll search for `new_ele_nsmap` in `ncclient/operations/util.py`.
I see `__getattr__` in `Manager`.
```python
def __getattr__(self, method):
if method in self._vendor_operations:
return functools.partial(self.execute, self._vendor_operations[method])
elif method in OPERATIONS:
return functools.partial(self.execute, OPERATIONS[method])
else:
# ...
```
`OPERATIONS` must be a mapping from operation name (like `'get'`) to the operation class (like `Retrieve`).
The user calls `m.get('xpath', path)`.
This calls `self.execute(OPERATIONS['get'], 'xpath', path)`.
`execute` is:
```python
def execute(self, cls, *args, **kwds):
return cls(self._session,
device_handler=self._device_handler,
async_mode=self._async_mode,
timeout=self._timeout,
raise_mode=self._raise_mode,
huge_tree=self._huge_tree).request(*args, **kwds)
```
So it calls `Retrieve(self._session, ...).request('xpath', path)`.
In `Retrieve.request(self, filter=None, with_defaults=None)`, `'xpath'` becomes the `filter` argument and `path` becomes the `with_defaults` argument.
Wait!
User's code: `reply = m.get('xpath', path)`
`Retrieve.request` signature: `def request(self, filter=None, with_defaults=None):`
So `filter` gets `'xpath'` and `with_defaults` gets `path`.
Then `node.append(util.build_filter(filter))` is called with `filter='xpath'`.
If `filter` is `'xpath'`, in `build_filter(spec)`:
`spec` is `'xpath'`.
`isinstance('xpath', tuple)` is False.
`isinstance('xpath', list)` is False.
It goes to the `else` block:
```python
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
And `validated_element('xpath', ...)` will be called.
But the traceback says:
```
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
Line 53 in `ncclient/operations/util.py` is:
```python
ns, select = criteria
```
This is inside `if isinstance(spec, tuple):` and `if type == "xpath":`.
So for this line to be reached, `spec` MUST be a tuple.
And `type` (the first element of `spec`) MUST be `"xpath"`.
Wait, if the user calls `m.get('xpath', path)`, and `m.get` is `functools.partial(self.execute, OPERATIONS['get'])`, then `m.get('xpath', path)` calls `self.execute(OPERATIONS['get'], 'xpath', path)`.
And `execute` calls `Retrieve(...).request('xpath', path)`.
If `Retrieve.request` is defined as `def request(self, filter=None, with_defaults=None):`, then `filter` is `'xpath'` and `with_defaults` is `path`.
Wait, if `filter` is just the string `'xpath'`, then `build_filter('xpath')` would NOT enter the `if isinstance(spec, tuple)` block.
Is it possible that `m.get` is NOT what I think it is?
Wait, I missed something.
Look at the user's provided ERROR traceback:
```
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
```
AHA! The user's code in the description is:
```python
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
BUT the traceback says:
```python
reply = m.get(filter=('xpath', path))
```
If the user calls `m.get(filter=('xpath', path))`, then `Retrieve.request` is called with `filter=('xpath', path)`.
Then `util.build_filter(('xpath', path))` is called.
In `build_filter`:
`spec` is `('xpath', path)`.
`isinstance(spec, tuple)` is True.
`type, criteria = spec` -> `type` is `'xpath'`, `criteria` is `path`.
Then `if type == "xpath":` is True.
`ns, select = criteria` -> `ns, select = path`.
If `path` is `'/a/b/c'`, this fails with `ValueError: too many values to unpack (expected 2)`.
So the bug is that `build_filter` expects `criteria` to be a tuple `(ns, select)` when `type == "xpath"`, but it should also accept a simple string (treating it as the `select` and perhaps using a default or no `ns`).
Wait, if `criteria` is a string, it should be treated as the `select` value.
Let's look at `build_filter` again.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
If `criteria` is just a string, `ns, select = criteria` fails.
If `criteria` is a tuple `(ns, select)`, it works.
The user says "The path parameter in 0.6.7 used to be a string".
So in 0.6.7, `criteria` was allowed to be a string.
If `criteria` is a string, what should `ns` be?
Probably `None` or an empty dict.
Let's see what `new_ele_nsmap` does.
I'll search for `new_ele_nsmap` in `ncclient/operations/util.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -n "def new_ele_nsmap" ncclient/operations/util.py<|"|>}<tool_call|><|tool_response>
Generated tokens 59 tokens · stopped: STOP
Maybe it's imported? Let's check imports in `ncclient/operations/util.py`.
Maybe it's imported? Let's check imports in `ncclient/operations/util.py`.
<channel|><|tool_call>call:read_file{end_line:30,filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:1}<tool_call|><|tool_response>
Generated tokens 59 tokens · stopped: STOP
It's imported from `ncclient.xml_`. Let's check `ncclient/xml_.py`.
It's imported from `ncclient.xml_`.
Let's check `ncclient/xml_.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -n "def new_ele_nsmap" ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 60 tokens · stopped: STOP
Wait, maybe it's `new_ele_ns` or something? Let's search for `def` in `ncclient/xml_.py`.
Wait, maybe it's `new_ele_ns` or something?
Let's search for `def` in `ncclient/xml_.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep "def " ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 63 tokens · stopped: STOP
I don't see `new_ele_nsmap` there. Wait, let's search for `nsmap` in `ncclient/xml_.py`.
I don't see `new_ele_nsmap` there.
Wait, let's search for `nsmap` in `ncclient/xml_.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep "nsmap" ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 639 tokens · stopped: STOP
Aha! It's a lambda:
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
So `nsmap` is the second argument.
Back to `build_filter` in `ncclient/operations/util.py`:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
The `type=type` in `new_ele_nsmap("filter", ns, type=type)` is passed as `**extra`, so it becomes an attribute of the element?
No, `etree.Element` doesn't take a `type` keyword argument like that in lxml unless it's part of `attrs`.
Wait, `new_ele_nsmap` definition: `lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
Wait, `etree.Element` signature is `etree.Element(tag, attrib=None, nsmap=None, **extra)`.
So `new_ele_nsmap("filter", ns, type=type)` results in:
`tag = qualify("filter")`
`attrs = {}` (default)
`nsmap = ns`
`**extra = {'type': type}`
So `etree.Element(qualify("filter"), {}, ns, type=type)`.
Actually, `etree.Element` doesn't take `type` as a keyword argument.
Wait, maybe it's an older version of lxml or I'm misremembering.
Regardless, the issue is the unpacking of `criteria`.
If the user provides `criteria` as a string, we should handle it.
If `criteria` is a string, we can assume `ns` is `None` (or `{}`) and `select` is the string.
Let's try to reproduce this.
I need a mock of `manager.connect` or just call `build_filter` directly.
Since I have the source, I can just run a python script.
Aha! It's a lambda:
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
So `nsmap` is the second argument.
Back to `build_filter` in `ncclient/operations/util.py`:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
The `type=type` in `new_ele_nsmap("filter", ns, type=type)` is passed as `**extra`, so it becomes an attribute of the element?
No, `etree.Element` doesn't take a `type` keyword argument like that in lxml unless it's part of `attrs`.
Wait, `new_ele_nsmap` definition: `lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
Wait, `etree.Element` signature is `etree.Element(tag, attrib=None, nsmap=None, **extra)`.
So `new_ele_nsmap("filter", ns, type=type)` results in:
`tag = qualify("filter")`
`attrs = {}` (default)
`nsmap = ns`
`**extra = {'type': type}`
So `etree.Element(qualify("filter"), {}, ns, type=type)`.
Actually, `etree.Element` doesn't take `type` as a keyword argument.
Wait, maybe it's an older version of lxml or I'm misremembering.
Regardless, the issue is the unpacking of `criteria`.
If the user provides `criteria` as a string, we should handle it.
If `criteria` is a string, we can assume `ns` is `None` (or `{}`) and `select` is the string.
Let's try to reproduce this.
I need a mock of `manager.connect` or just call `build_filter` directly.
Since I have the source, I can just run a python script.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from ncclient.operations import util
try:
# This is what 0.6.8 does if criteria is a string
# Spec is a tuple ('xpath', '/a/b/c')
util.build_filter(('xpath', '/a/b/c'))
print("Success")
except ValueError as e:
print(f"Caught expected ValueError: {e}")
except Exception as e:
print(f"Caught unexpected exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 580 tokens · stopped: STOP
Perfect, reproduced.
Now, how should we fix it?
In `build_filter`, if `type == "xpath"`, we should check if `criteria` is a tuple or a string.
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, what if `criteria` was something else? The user said it used to be a string.
If it's not a tuple, we can assume it's the `select` string.
Let's check if there are other places where `criteria` is used this way.
In `build_filter`:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
```
For `subtree`, `criteria` is passed to `to_ele`.
Let's see if we should use `None` or `{}` for `ns`.
`new_ele_nsmap` uses `nsmap` as the second argument to `etree.Element`.
If `ns` is `None`, `etree.Element` handles it fine.
Let's refine the fix.
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
But wait, if `criteria` is supposed to be a tuple `(ns, select)`, then `ns` should be a dictionary mapping prefixes to URIs.
If the user provides just a string, they are providing the XPath expression.
If they wanted to provide namespaces, they would provide a tuple.
Is there any other way they could provide namespaces?
Maybe. But based on the issue report, the string was the primary way.
Let's check if there are any tests that use `build_filter` with `xpath`.
I'll search for `xpath` in `test/`.
Perfect, reproduced.
Now, how should we fix it?
In `build_filter`, if `type == "xpath"`, we should check if `criteria` is a tuple or a string.
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, what if `criteria` was something else? The user said it used to be a string.
If it's not a tuple, we can assume it's the `select` string.
Let's check if there are other places where `criteria` is used this way.
In `build_filter`:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
```
For `subtree`, `criteria` is passed to `to_ele`.
Let's see if we should use `None` or `{}` for `ns`.
`new_ele_nsmap` uses `nsmap` as the second argument to `etree.Element`.
If `ns` is `None`, `etree.Element` handles it fine.
Let's refine the fix.
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
But wait, if `criteria` is supposed to be a tuple `(ns, select)`, then `ns` should be a dictionary mapping prefixes to URIs.
If the user provides just a string, they are providing the XPath expression.
If they wanted to provide namespaces, they would provide a tuple.
Is there any other way they could provide namespaces?
Maybe. But based on the issue report, the string was the primary way.
Let's check if there are any tests that use `build_filter` with `xpath`.
I'll search for `xpath` in `test/`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "xpath" test/ | grep "build_filter"<|"|>}<tool_call|><|tool_response>
Generated tokens 46 tokens · stopped: STOP
No direct hits. Let's just search for `build_filter` in `test/`.
No direct hits. Let's just search for `build_filter` in `test/`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "build_filter" test/<|"|>}<tool_call|><|tool_response>
Generated tokens 45 tokens · stopped: STOP
Let's look at `test/unit/operations/test_utils.py`.
Let's look at `test/unit/operations/test_utils.py`.
<channel|><|tool_call>call:read_file{filepath:<|"|>test/unit/operations/test_utils.py<|"|>}<tool_call|><|tool_response>
Generated tokens 686 tokens · stopped: STOP
In `test_build_filter_2`:
```python
def test_build_filter_2(self):
select = "configuration/system"
ns = {"ns0": "http://www.xxx.org"}
criteria = (ns, select)
filter = ("xpath", criteria)
reply = build_filter(filter)
```
This confirms that the currently expected way to pass an XPath filter is `('xpath', (ns, select))`.
The bug report says that in 0.6.7, `filter = ('xpath', select)` (where `select` is a string) worked.
So we should change `build_filter` to handle both cases.
Let's prepare the fix.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
else:
raise OperationError("Invalid filter type")
```
Wait, is `None` okay for `ns` in `new_ele_nsmap("filter", ns, type=type)`?
In `test_build_filter_2`, `ns` is a dict `{"ns0": "http://www.xxx.org"}`.
`new_ele_nsmap` calls `etree.Element(qualify(tag), attrs, nsmap, **extra)`.
If `nsmap` is `None`, `etree.Element` just doesn't add any namespaces. This should be correct.
Wait, I should double check if `etree.Element` supports `nsmap=None`. Yes it does.
Let's verify with a small test script.
In `test_build_filter_2`:
```python
def test_build_filter_2(self):
select = "configuration/system"
ns = {"ns0": "http://www.xxx.org"}
criteria = (ns, select)
filter = ("xpath", criteria)
reply = build_filter(filter)
```
This confirms that the currently expected way to pass an XPath filter is `('xpath', (ns, select))`.
The bug report says that in 0.6.7, `filter = ('xpath', select)` (where `select` is a string) worked.
So we should change `build_filter` to handle both cases.
Let's prepare the fix.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
else:
raise OperationError("Invalid filter type")
```
Wait, is `None` okay for `ns` in `new_ele_nsmap("filter", ns, type=type)`?
In `test_build_filter_2`, `ns` is a dict `{"ns0": "http://www.xxx.org"}`.
`new_ele_nsmap` calls `etree.Element(qualify(tag), attrs, nsmap, **extra)`.
If `nsmap` is `None`, `etree.Element` just doesn't add any namespaces. This should be correct.
Wait, I should double check if `etree.Element` supports `nsmap=None`. Yes it does.
Let's verify with a small test script.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from lxml import etree
def qualify(tag):
return tag
def new_ele_nsmap(tag, nsmap, attrs={}, **extra):
return etree.Element(qualify(tag), attrs, nsmap, **extra)
dns = {"ns0": "http://www.xxx.org"}
select = "configuration/system"
# Current expected behavior
res1 = new_ele_nsmap("filter", dns, type="xpath")
res1.attrib["select"] = select
print(f"Res1: {etree.tostring(res1)}")
# Proposed backward compatibility
res2 = new_ele_nsmap("filter", None, type="xpath")
res2.attrib["select"] = select
print(f"Res2: {etree.tostring(res2)}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 325 tokens · stopped: STOP
Yes, this looks correct. `Res2` is exactly what we want for a simple string path.
Now I will apply the fix to `ncclient/operations/util.py`.
Wait, the original code snippet in `read_file` was:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
I'll replace:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
with:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Let me double check the indentation and surroundings.
Yes, this looks correct. `Res2` is exactly what we want for a simple string path.
Now I will apply the fix to `ncclient/operations/util.py`.
Wait, the original code snippet in `read_file` was:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
I'll replace:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
with:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Let me double check the indentation and surroundings.
<channel|><|tool_call>call:read_file{end_line:60,filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:48}<tool_call|><|tool_response>
Generated tokens 370 tokens · stopped: STOP
The original code:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Proposed replacement:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, what if `criteria` is not a tuple and not a string? The `ns, select = None, criteria` part will just assign whatever `criteria` is. If `criteria` is, say, an integer, then `rep.attrib["select"] = select` might fail because lxml expects a string for attributes. But since the user said it's supposed to be a string, this should be fine.
Let's apply the fix.The original code:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Proposed replacement:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, what if `criteria` is not a tuple and not a string? The `ns, select = None, criteria` part will just assign whatever `criteria` is. If `criteria` is, say, an integer, then `rep.attrib["select"] = select` might fail because lxml expects a string for attributes. But since the user said it's supposed to be a string, this should be fine.
Let's apply the fix.<channel|><|tool_call>call:edit_file{filepath:<|"|>ncclient/operations/util.py<|"|>,new_string:<|"|> if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select<|"|>,old_string:<|"|> if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select<|"|>}<tool_call|><|tool_response>
Generated tokens 182 tokens · stopped: STOP
Now let's verify the fix with a reproduction script and run the existing tests. Reproduction script:
Now let's verify the fix with a reproduction script and run the existing tests.
Reproduction script:
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from ncclient.operations import util
try:
# Case 1: String path (the reported bug)
util.build_filter(('xpath', '/a/b/c'))
print("Case 1 (string path) success")
# Case 2: Tuple path (existing functionality)
util.build_filter(('xpath', ({'ns0': 'uri'}, '/a/b/c')))
print("Case 2 (tuple path) success")
except Exception as e:
print(f"Caught exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 72 tokens · stopped: STOP
The reproduction script now passes for both cases. Now I should run the existing tests for `ncclient.operations` to make sure I didn't break anything. I'll look for tests related to filters or operations.
The reproduction script now passes for both cases. Now I should run the existing tests for `ncclient.operations` to make sure I didn't break anything.
I'll look for tests related to filters or operations.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "build_filter" tests/<|"|>}<tool_call|><|tool_response>
Generated tokens 59 tokens · stopped: STOP
Wait, I forgot to check the workspace layout. I should check if the tests are in `tests/` or `test/` or something else.
Wait, I forgot to check the workspace layout. I should check if the tests are in `tests/` or `test/` or something else.
<channel|><|tool_call>call:run_command{command:<|"|>find . -maxdepth 2 -name "*test*"<|"|>}<tool_call|><|tool_response>
Generated tokens 40 tokens · stopped: STOP
Ah, it's in `./test`. Let me grep there.
Ah, it's in `./test`. Let me grep there.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "build_filter" test/<|"|>}<tool_call|><|tool_response>
Generated tokens 80 tokens · stopped: STOP
I'll run `test/unit/operations/test_utils.py` and `test/unit/operations/test_retrieve.py`.
I'll run `test/unit/operations/test_utils.py` and `test/unit/operations/test_retrieve.py`.
<channel|><|tool_call>call:run_command{command:<|"|>pytest test/unit/operations/test_utils.py test/unit/operations/test_retrieve.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Generated tokens 70 tokens · stopped: STOP
All tests passed. I have successfully reproduced the issue (via script), fixed it, and verified the fix with the reproduction script and the existing test suite. I will now check `git status --short && git diff` for hygiene.
All tests passed. I have successfully reproduced the issue (via script), fixed it, and verified the fix with the reproduction script and the existing test suite.
I will now check `git status --short && git diff` for hygiene.<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 21 tokens · stopped: STOP
Everything looks clean. I am ready to submit.
Everything looks clean. I am ready to submit.
<channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>
Patch, tests and logs
Final code change Included
diff --git a/ncclient/operations/util.py b/ncclient/operations/util.py
index 0d1bb38..46dd4aa 100755
--- a/ncclient/operations/util.py
+++ b/ncclient/operations/util.py
@@ -50,7 +50,10 @@ def build_filter(spec, capcheck=None):
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
- ns, select = criteria
+ if isinstance(criteria, tuple):
+ ns, select = criteria
+ else:
+ ns, select = None, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
Test output Included
============================= test session starts ==============================
collecting ... collected 182 items
test/unit/test_manager.py::TestManager::test_connect_exception PASSED [ 0%]
test/unit/test_manager.py::TestManager::test_connect_ioproc PASSED [ 1%]
test/unit/test_manager.py::TestManager::test_connect_outbound_ssh PASSED [ 1%]
test/unit/test_manager.py::TestManager::test_connect_ssh PASSED [ 2%]
test/unit/test_manager.py::TestManager::test_connect_ssh1 PASSED [ 2%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ecdsa PASSED [ 3%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ed25519 PASSED [ 3%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_rsa PASSED [ 4%]
test/unit/test_manager.py::TestManager::test_connect_with_ssh_config PASSED [ 4%]
test/unit/test_manager.py::TestManager::test_ioproc PASSED [ 5%]
test/unit/test_manager.py::TestManager::test_make_device_handler PASSED [ 6%]
test/unit/test_manager.py::TestManager::test_make_device_handler_provided_handler PASSED [ 6%]
test/unit/test_manager.py::TestManager::test_manager_channel_id PASSED [ 7%]
test/unit/test_manager.py::TestManager::test_manager_channel_name PASSED [ 7%]
test/unit/test_manager.py::TestManager::test_manager_channel_session_id PASSED [ 8%]
test/unit/test_manager.py::TestManager::test_manager_client_capability PASSED [ 8%]
test/unit/test_manager.py::TestManager::test_manager_connected PASSED [ 9%]
test/unit/test_manager.py::TestManager::test_manager_getattr PASSED [ 9%]
test/unit/test_manager.py::TestManager::test_manager_getattr2 PASSED [ 10%]
test/unit/test_manager.py::TestManager::test_manager_huge_node PASSED [ 10%]
test/unit/test_manager.py::TestManager::test_manager_locked PASSED [ 11%]
test/unit/test_manager.py::TestManager::test_manager_server_capability PASSED [ 12%]
test/unit/test_manager.py::TestManager::test_manager_take_notification PASSED [ 12%]
test/unit/test_manager.py::TestManager::test_outbound_manager_connected PASSED [ 13%]
test/unit/test_manager.py::TestManager::test_ssh PASSED [ 13%]
test/unit/test_manager.py::TestManager::test_ssh2 PASSED [ 14%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_001 PASSED [ 14%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_002 PASSED [ 15%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_003 PASSED [ 15%]
test/unit/test_xml_.py::TestXML::test_ncelement_find PASSED [ 16%]
test/unit/test_xml_.py::TestXML::test_ncelement_findtext PASSED [ 17%]
test/unit/test_xml_.py::TestXML::test_ncelement_remove_namespace PASSED [ 17%]
test/unit/test_xml_.py::TestXML::test_ncelement_reply_001 PASSED [ 18%]
test/unit/test_xml_.py::TestXML::test_parse_root PASSED [ 18%]
test/unit/test_xml_.py::TestXML::test_sub_ele_inherit_parent_namespace PASSED [ 19%]
test/unit/test_xml_.py::TestXML::test_to_ele PASSED [ 19%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail PASSED [ 20%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail_2 PASSED [ 20%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail_3 PASSED [ 21%]
test/unit/test_xml_.py::TestXML::test_validated_element_pass PASSED [ 21%]
test/unit/devices/test_default.py::TestDefaultDevice::test_get_capabilties PASSED [ 22%]
test/unit/devices/test_default.py::TestDefaultDevice::test_get_ssh_subsystem_names PASSED [ 23%]
test/unit/devices/test_default.py::TestDefaultDevice::test_handle_connection_exceptions PASSED [ 23%]
test/unit/devices/test_default.py::TestDefaultDevice::test_handle_raw_dispatch PASSED [ 24%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_1 PASSED [ 24%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_2 PASSED [ 25%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_3 PASSED [ 25%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_4 PASSED [ 26%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_5 PASSED [ 26%]
test/unit/devices/test_default.py::TestDefaultDevice::test_perform_qualify_check PASSED [ 27%]
test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_device_labels PASSED [ 28%]
test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_devices PASSED [ 28%]
test/unit/devices/test_junos.py::TestJunosDevice::test_additional_operations PASSED [ 29%]
test/unit/devices/test_junos.py::TestJunosDevice::test_handle_connection_exceptions PASSED [ 29%]
test/unit/devices/test_junos.py::TestJunosDevice::test_perform_quality_check PASSED [ 30%]
test/unit/devices/test_junos.py::TestJunosDevice::test_transform_reply PASSED [ 30%]
test/unit/operations/test_edit.py::TestEdit::test_cancel_commit PASSED [ 31%]
test/unit/operations/test_edit.py::TestEdit::test_commit PASSED [ 31%]
test/unit/operations/test_edit.py::TestEdit::test_commit_exception PASSED [ 32%]
test/unit/operations/test_edit.py::TestEdit::test_copy_config PASSED [ 32%]
test/unit/operations/test_edit.py::TestEdit::test_copy_config_2 PASSED [ 33%]
test/unit/operations/test_edit.py::TestEdit::test_delete_config PASSED [ 34%]
test/unit/operations/test_edit.py::TestEdit::test_discard_changes PASSED [ 34%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config PASSED [ 35%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_2 PASSED [ 35%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_invalid_arguments_exception PASSED [ 36%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_validate_capability_exception PASSED [ 36%]
test/unit/operations/test_edit.py::TestEdit::test_validate_config PASSED [ 37%]
test/unit/operations/test_edit.py::TestEdit::test_validate_datastore PASSED [ 37%]
test/unit/operations/test_lock.py::TestLock::test_lock PASSED [ 38%]
test/unit/operations/test_lock.py::TestLock::test_lock_context_enter PASSED [ 39%]
test/unit/operations/test_lock.py::TestLock::test_lock_context_exit PASSED [ 39%]
test/unit/operations/test_lock.py::TestLock::test_lock_default_param PASSED [ 40%]
test/unit/operations/test_lock.py::TestLock::test_unlock PASSED [ 40%]
test/unit/operations/test_lock.py::TestLock::test_unlock_default_param PASSED [ 41%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch PASSED [ 41%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch_2 PASSED [ 42%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get PASSED [ 42%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config PASSED [ 43%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults PASSED [ 43%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults_missing_capability PASSED [ 44%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_schema PASSED [ 45%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_also_supported PASSED [ 45%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_basic_mode PASSED [ 46%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_missing_capability PASSED [ 46%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported PASSED [ 47%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_multi_subtree_filters PASSED [ 47%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_async PASSED [ 48%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_capability_error PASSED [ 48%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_exception PASSED [ 49%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_workaround PASSED [ 50%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply PASSED [ 50%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_exception PASSED [ 51%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_workaround PASSED [ 51%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror PASSED [ 52%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_multiple_errors PASSED [ 52%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_tag_to_attr PASSED [ 53%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_send PASSED [ 53%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_timeout_error PASSED [ 54%]
test/unit/operations/test_session.py::TestSession::test_close_session PASSED [ 54%]
test/unit/operations/test_session.py::TestSession::test_kill_session PASSED [ 55%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_all PASSED [ 56%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_stream PASSED [ 56%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_times PASSED [ 57%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter PASSED [ 57%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_other PASSED [ 58%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_subtree PASSED [ 58%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath PASSED [ 59%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath_ns PASSED [ 59%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url PASSED [ 60%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url_2 PASSED [ 60%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url_3 PASSED [ 61%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_1 PASSED [ 62%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_2 PASSED [ 62%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_3 PASSED [ 63%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_command PASSED [ 63%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit PASSED [ 64%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_at_time PASSED [ 64%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed PASSED [ 65%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed_at_time PASSED [ 65%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_compare_conf PASSED [ 66%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc PASSED [ 67%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc_str PASSED [ 67%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf PASSED [ 68%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf_text_sets_huge_tree PASSED [ 68%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_halt PASSED [ 69%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_json PASSED [ 69%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_list PASSED [ 70%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_set PASSED [ 70%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_text PASSED [ 71%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_xml PASSED [ 71%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_reboot PASSED [ 72%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_multiple_rpc_reply PASSED [ 73%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_rpc_reply PASSED [ 73%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_splited_rpc_reply PASSED [ 74%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on PASSED [ 74%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on_junos_rfc_compliant PASSED [ 75%]
test/unit/transport/test_parser.py::TestSession::test_use_filter_False PASSED [ 75%]
test/unit/transport/test_parser.py::TestSession::test_use_filter_xml_without_sax_input PASSED [ 76%]
test/unit/transport/test_session.py::TestSession::test_add_listener PASSED [ 76%]
test/unit/transport/test_session.py::TestSession::test_add_listener_exception PASSED [ 77%]
test/unit/transport/test_session.py::TestSession::test_client_capability PASSED [ 78%]
test/unit/transport/test_session.py::TestSession::test_connected PASSED [ 78%]
test/unit/transport/test_session.py::TestSession::test_dispatch_error PASSED [ 79%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message PASSED [ 79%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message_error PASSED [ 80%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message_error2 PASSED [ 80%]
test/unit/transport/test_session.py::TestSession::test_get_listener_instance PASSED [ 81%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_build PASSED [ 81%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_error PASSED [ 82%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_ok PASSED [ 82%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_parse PASSED [ 83%]
test/unit/transport/test_session.py::TestSession::test_id PASSED [ 84%]
test/unit/transport/test_session.py::TestSession::test_notification_handler_non_notification PASSED [ 84%]
test/unit/transport/test_session.py::TestSession::test_notification_handler_valid_notification PASSED [ 85%]
test/unit/transport/test_session.py::TestSession::test_post_connect PASSED [ 85%]
test/unit/transport/test_session.py::TestSession::test_post_connect2 PASSED [ 86%]
test/unit/transport/test_session.py::TestSession::test_remove_listener PASSED [ 86%]
test/unit/transport/test_session.py::TestSession::test_send_connected PASSED [ 87%]
test/unit/transport/test_session.py::TestSession::test_send_disconnected PASSED [ 87%]
test/unit/transport/test_session.py::TestSession::test_server_capability PASSED [ 88%]
test/unit/transport/test_session.py::TestSession::test_take_notification PASSED [ 89%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_agent PASSED [ 89%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_agent_exception PASSED [ 90%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles PASSED [ 90%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles_exception PASSED [ 91%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_exception PASSED [ 91%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles PASSED [ 92%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles_exception PASSED [ 92%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_no_methods_exception PASSED [ 93%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_password PASSED [ 93%]
test/unit/transport/test_ssh.py::TestSSH::test_close PASSED [ 94%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key PASSED [ 95%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_2 PASSED [ 95%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_IOError PASSED [ 96%]
test/unit/transport/test_ssh.py::TestSSH::test_parse PASSED [ 96%]
test/unit/transport/test_ssh.py::TestSSH::test_parse11 PASSED [ 97%]
test/unit/transport/test_ssh.py::TestSSH::test_parse_incomplete_delimiter PASSED [ 97%]
test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py2 SKIPPED [ 98%]
test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py3 PASSED [ 98%]
test/unit/transport/test_ssh.py::TestSSH::test_run_send_py2 SKIPPED [ 99%]
test/unit/transport/test_ssh.py::TestSSH::test_run_send_py3 PASSED [100%]
=============================== warnings summary ===============================
../opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32
/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.
from cryptography.hazmat.backends import default_backend
-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
==================================== PASSES ====================================
___________ TestSession.test_filter_xml_delimiter_multiple_rpc_reply ___________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: </rpc-reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]><rpc-reply>
_______________ TestSession.test_filter_xml_delimiter_rpc_reply ________________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: </rpc-reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: lts></rpc-reply>]]>
___________ TestSession.test_filter_xml_delimiter_splited_rpc_reply ____________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: -reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: esults></rpc-reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]><rpc-reply>
____________ TestSession.test_filter_xml_sax_on_junos_rfc_compliant ____________
----------------------------- Captured stdout call -----------------------------
<Element multi-routing-engine-results at 0x7021fd44b640>
___________________ TestSession.test_dispatch_message_error2 ___________________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.session:session.py:89 [session 0x7021fd195950] error dispatching to <ncclient.transport.session.HelloHandler object at 0x7021fd58a390>: Exception()
- generated xml file: /tmp/rebench-grade-80ec54c07b2f4e32a51f8986abcb7aaa.xml --
=========================== short test summary info ============================
PASSED test/unit/test_manager.py::TestManager::test_connect_exception
PASSED test/unit/test_manager.py::TestManager::test_connect_ioproc
PASSED test/unit/test_manager.py::TestManager::test_connect_outbound_ssh
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh1
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ecdsa
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ed25519
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_rsa
PASSED test/unit/test_manager.py::TestManager::test_connect_with_ssh_config
PASSED test/unit/test_manager.py::TestManager::test_ioproc
PASSED test/unit/test_manager.py::TestManager::test_make_device_handler
PASSED test/unit/test_manager.py::TestManager::test_make_device_handler_provided_handler
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_id
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_name
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_session_id
PASSED test/unit/test_manager.py::TestManager::test_manager_client_capability
PASSED test/unit/test_manager.py::TestManager::test_manager_connected
PASSED test/unit/test_manager.py::TestManager::test_manager_getattr
PASSED test/unit/test_manager.py::TestManager::test_manager_getattr2
PASSED test/unit/test_manager.py::TestManager::test_manager_huge_node
PASSED test/unit/test_manager.py::TestManager::test_manager_locked
PASSED test/unit/test_manager.py::TestManager::test_manager_server_capability
PASSED test/unit/test_manager.py::TestManager::test_manager_take_notification
PASSED test/unit/test_manager.py::TestManager::test_outbound_manager_connected
PASSED test/unit/test_manager.py::TestManager::test_ssh
PASSED test/unit/test_manager.py::TestManager::test_ssh2
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_001
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_002
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_003
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_find
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_findtext
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_remove_namespace
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_reply_001
PASSED test/unit/test_xml_.py::TestXML::test_parse_root
PASSED test/unit/test_xml_.py::TestXML::test_sub_ele_inherit_parent_namespace
PASSED test/unit/test_xml_.py::TestXML::test_to_ele
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail_2
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail_3
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_pass
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_get_capabilties
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_get_ssh_subsystem_names
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_handle_connection_exceptions
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_handle_raw_dispatch
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_1
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_2
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_3
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_4
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_5
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_perform_qualify_check
PASSED test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_device_labels
PASSED test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_devices
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_additional_operations
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_handle_connection_exceptions
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_perform_quality_check
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_transform_reply
PASSED test/unit/operations/test_edit.py::TestEdit::test_cancel_commit
PASSED test/unit/operations/test_edit.py::TestEdit::test_commit
PASSED test/unit/operations/test_edit.py::TestEdit::test_commit_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_copy_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_copy_config_2
PASSED test/unit/operations/test_edit.py::TestEdit::test_delete_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_discard_changes
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_2
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_invalid_arguments_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_validate_capability_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_validate_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_validate_datastore
PASSED test/unit/operations/test_lock.py::TestLock::test_lock
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_context_enter
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_context_exit
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_default_param
PASSED test/unit/operations/test_lock.py::TestLock::test_unlock
PASSED test/unit/operations/test_lock.py::TestLock::test_unlock_default_param
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch_2
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults_missing_capability
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_schema
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_also_supported
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_basic_mode
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_missing_capability
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_multi_subtree_filters
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_async
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_capability_error
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_exception
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_workaround
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_exception
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_workaround
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_multiple_errors
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_tag_to_attr
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_send
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_timeout_error
PASSED test/unit/operations/test_session.py::TestSession::test_close_session
PASSED test/unit/operations/test_session.py::TestSession::test_kill_session
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_all
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_stream
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_times
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_other
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_subtree
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath_ns
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url_2
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url_3
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_1
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_2
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_3
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_command
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_at_time
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed_at_time
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_compare_conf
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc_str
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf_text_sets_huge_tree
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_halt
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_json
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_list
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_set
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_text
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_xml
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_reboot
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_multiple_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_splited_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on_junos_rfc_compliant
PASSED test/unit/transport/test_parser.py::TestSession::test_use_filter_False
PASSED test/unit/transport/test_parser.py::TestSession::test_use_filter_xml_without_sax_input
PASSED test/unit/transport/test_session.py::TestSession::test_add_listener
PASSED test/unit/transport/test_session.py::TestSession::test_add_listener_exception
PASSED test/unit/transport/test_session.py::TestSession::test_client_capability
PASSED test/unit/transport/test_session.py::TestSession::test_connected
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_error
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message_error
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message_error2
PASSED test/unit/transport/test_session.py::TestSession::test_get_listener_instance
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_build
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_error
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_ok
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_parse
PASSED test/unit/transport/test_session.py::TestSession::test_id
PASSED test/unit/transport/test_session.py::TestSession::test_notification_handler_non_notification
PASSED test/unit/transport/test_session.py::TestSession::test_notification_handler_valid_notification
PASSED test/unit/transport/test_session.py::TestSession::test_post_connect
PASSED test/unit/transport/test_session.py::TestSession::test_post_connect2
PASSED test/unit/transport/test_session.py::TestSession::test_remove_listener
PASSED test/unit/transport/test_session.py::TestSession::test_send_connected
PASSED test/unit/transport/test_session.py::TestSession::test_send_disconnected
PASSED test/unit/transport/test_session.py::TestSession::test_server_capability
PASSED test/unit/transport/test_session.py::TestSession::test_take_notification
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_agent
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_agent_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_no_methods_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_password
PASSED test/unit/transport/test_ssh.py::TestSSH::test_close
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_2
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_IOError
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse11
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse_incomplete_delimiter
PASSED test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py3
PASSED test/unit/transport/test_ssh.py::TestSSH::test_run_send_py3
SKIPPED [1] test/unit/transport/test_ssh.py:318: test not supported >= Python3
SKIPPED [1] test/unit/transport/test_ssh.py:335: test currently non-functional
================== 180 passed, 2 skipped, 1 warning in 0.51s ===================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite errors="0" failures="0" hostname="ba99cc5aad23" name="pytest" skipped="2" tests="182" time="0.499" timestamp="2026-11-14T03:49:18.538750"><testcase classname="test.unit.test_manager.TestManager" name="test_connect_exception" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ioproc" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_outbound_ssh" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh1" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_ecdsa" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_ed25519" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_rsa" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_with_ssh_config" time="0.003" /><testcase classname="test.unit.test_manager.TestManager" name="test_ioproc" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_make_device_handler" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_make_device_handler_provided_handler" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_id" time="0.003" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_name" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_session_id" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_client_capability" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_connected" time="0.016" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_getattr" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_getattr2" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_huge_node" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_locked" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_server_capability" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_take_notification" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_outbound_manager_connected" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_ssh" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_ssh2" time="0.002" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_001" time="0.001" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_002" time="0.000" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_003" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_find" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_findtext" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_remove_namespace" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_reply_001" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_parse_root" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_sub_ele_inherit_parent_namespace" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_to_ele" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail_2" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail_3" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_pass" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_get_capabilties" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_get_ssh_subsystem_names" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_handle_connection_exceptions" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_handle_raw_dispatch" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_1" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_2" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_3" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_4" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_5" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_perform_qualify_check" time="0.000" /><testcase classname="test.unit.devices.test_get_supported_devices.TestGetSupportedDevices" name="test_get_supported_device_labels" time="0.000" /><testcase classname="test.unit.devices.test_get_supported_devices.TestGetSupportedDevices" name="test_get_supported_devices" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_additional_operations" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_handle_connection_exceptions" time="0.001" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_perform_quality_check" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_transform_reply" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_cancel_commit" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_commit" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_commit_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_copy_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_copy_config_2" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_delete_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_discard_changes" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_2" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_invalid_arguments_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_validate_capability_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_validate_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_validate_datastore" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_context_enter" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_context_exit" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_default_param" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_unlock" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_unlock_default_param" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_dispatch" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_dispatch_2" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config_with_defaults" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config_with_defaults_missing_capability" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_schema" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_also_supported" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_basic_mode" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_missing_capability" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_not_supported" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_multi_subtree_filters" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_async" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_capability_error" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_huge_text_node_exception" time="0.008" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_huge_text_node_workaround" time="0.065" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply_huge_text_node_exception" time="0.004" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply_huge_text_node_workaround" time="0.003" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror" time="0.002" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror_multiple_errors" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror_tag_to_attr" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_send" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_timeout_error" time="0.001" /><testcase classname="test.unit.operations.test_session.TestSession" name="test_close_session" time="0.001" /><testcase classname="test.unit.operations.test_session.TestSession" name="test_kill_session" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_all" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_stream" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_times" time="0.001" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_other" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_subtree" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_xpath" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_xpath_ns" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url_2" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url_3" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_1" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_2" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_3" time="0.000" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_command" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_at_time" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_confirmed" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_confirmed_at_time" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_compare_conf" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_execute_rpc" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_execute_rpc_str" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_getconf" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_getconf_text_sets_huge_tree" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_halt" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_json" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_list" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_set" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_text" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_xml" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_reboot" time="0.001" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_multiple_rpc_reply" time="0.007" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_rpc_reply" time="0.023" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_splited_rpc_reply" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_sax_on" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_sax_on_junos_rfc_compliant" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_use_filter_False" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_use_filter_xml_without_sax_input" time="0.005" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_add_listener" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_add_listener_exception" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_client_capability" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_connected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_error" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message_error" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message_error2" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_get_listener_instance" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_build" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_callback_error" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_callback_ok" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_parse" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_id" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_notification_handler_non_notification" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_notification_handler_valid_notification" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_post_connect" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_post_connect2" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_remove_listener" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_send_connected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_send_disconnected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_server_capability" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_take_notification" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_agent" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_agent_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_default_keyfiles" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_default_keyfiles_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_keyfiles" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_keyfiles_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_no_methods_exception" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_password" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_close" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key_2" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key_IOError" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse11" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse_incomplete_delimiter" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_receive_py2" time="0.000"><skipped message="test not supported >= Python3" type="pytest.skip">/testbed/test/unit/transport/test_ssh.py:318: test not supported >= Python3</skipped></testcase><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_receive_py3" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_send_py2" time="0.000"><skipped message="test currently non-functional" type="pytest.skip">/testbed/test/unit/transport/test_ssh.py:335: test currently non-functional</skipped></testcase><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_send_py3" time="0.001" /></testsuite></testsuites>
Agent log Included
[ 0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
[ 0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository ncclient/ncclient.
[ 31.0s] 💭 (1515 chars) "The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)`
(where `path` is a string) n..."
[ 31.0s] 🔧 run_command grep -rn "def build_filter" ncclient/operations/util.py
[ 31.0s] → 48:def build_filter(spec, capcheck=None):
[ 34.9s] 💭 (77 chars) "Okay, `build_filter` is defined at line 48. Let's read the code around there."
[ 34.9s] 📖 read_file (ncclient/operations/util.py)
[ 35.0s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': ' #
capcheck(\':candidate\')\n #…
[ 76.1s] 💭 (2014 chars) "Wait, the code I see in `build_filter` is:
```python
def build_filter(spec, capcheck=None):
type = None
if isin..."
[ 76.1s] 🔧 run_command grep -n "def get" ncclient/manager.py
[ 76.1s] → error (exit 0):
[ 82.3s] 💭 (148 chars) "Maybe it's not `def get`. Let me search for `get` in `ncclient/manager.py`.
Actually, let's look at `ncclient/operations..."
[ 82.3s] 📖 read_file (ncclient/operations/retrieve.py)
[ 82.4s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/retrieve.py', 'content': ' "See
:class:`GetReply`."\n\n def requ…
[ 89.0s] 💭 (269 chars) "Okay, so `Retrieve.request` calls `util.build_filter(filter)`.
Now let's see how `manager.connect(...).get()` calls `Re..."
[ 89.0s] 🔧 run_command grep -n "def get" ncclient/manager.py
[ 89.1s] → error (exit 0):
[ 97.1s] 💭 (212 chars) "That's strange. Maybe it's inherited? Let's check `ncclient/manager.py` for any methods.
Wait, maybe `manager.connect` r..."
[ 97.1s] 🔧 run_command grep -n "get(" ncclient/manager.py
[ 97.2s] → 71: handler = device_params.get('handler', None)
[ 103.8s] 💭 (149 chars) "None of these are a `get` method.
Wait, `manager.connect(...) as m:`. `m` is an instance of `Manager`.
Let's look at `nc..."
[ 103.8s] 🔧 run_command grep -n "class Manager" ncclient/manager.py
[ 103.9s] → 171:class Manager(object):
[ 106.8s] 💭 (45 chars) "Let's look at the methods of `Manager` class."
[ 106.8s] 🔧 run_command grep "def " ncclient/manager.py | grep -B 0 "Manager" -A 100
[ 106.9s] → error (exit 0):
[ 109.8s] 💭 (60 chars) "I'll just read `ncclient/manager.py` starting from line 171."
[ 109.8s] 📖 read_file (ncclient/manager.py)
[ 109.8s] ✓ {'status': 'ok', 'filepath': 'ncclient/manager.py', 'content': 'class Manager(object):\n\n """\n
For details on th…
[ 209.5s] 💭 (4899 chars) "I see `__getattr__` in `Manager`.
```python
def __getattr__(self, method):
if method in self._vendor_operat..."
[ 209.5s] 🔧 run_command grep -n "def new_ele_nsmap" ncclient/operations/util.py
[ 209.6s] → error (exit 0):
[ 214.1s] 💭 (74 chars) "Maybe it's imported? Let's check imports in `ncclient/operations/util.py`."
[ 214.1s] 📖 read_file (ncclient/operations/util.py)
[ 214.1s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': '# Copyright 2009 Shikhar
Bhushan\n#\n# Licensed …
[ 216.4s] 💭 (68 chars) "It's imported from `ncclient.xml_`.
Let's check `ncclient/xml_.py`."
[ 216.4s] 🔧 run_command grep -n "def new_ele_nsmap" ncclient/xml_.py
[ 216.4s] → error (exit 0):
[ 219.4s] 💭 (89 chars) "Wait, maybe it's `new_ele_ns` or something?
Let's search for `def` in `ncclient/xml_.py`."
[ 219.4s] 🔧 run_command grep "def " ncclient/xml_.py
[ 219.5s] → def _get_parser(huge_tree=False):
[ 223.1s] 💭 (88 chars) "I don't see `new_ele_nsmap` there.
Wait, let's search for `nsmap` in `ncclient/xml_.py`."
[ 223.1s] 🔧 run_command grep "nsmap" ncclient/xml_.py
[ 223.1s] → return node.nsmap[node.prefix]
[ 265.4s] 💭 (1557 chars) "Aha! It's a lambda:
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **e..."
[ 265.4s] 🔧 run_command (12 lines) python3 - <<'PY'
[ 265.5s] → Caught expected ValueError: too many values to unpack (expected 2)
[ 300.3s] 💭 (2000 chars) "Perfect, reproduced.
Now, how should we fix it?
In `build_filter`, if `type == "xpath"`, we should check if `criteria` ..."
[ 300.3s] 🔧 run_command grep -rn "xpath" test/ | grep "build_filter"
[ 300.3s] → error (exit 0):
[ 303.3s] 💭 (64 chars) "No direct hits. Let's just search for `build_filter` in `test/`."
[ 303.3s] 🔧 run_command grep -rn "build_filter" test/
[ 303.3s] → test/unit/operations/test_retrieve.py:30: node.append(util.build_filter(root_filter))
[ 306.0s] 💭 (51 chars) "Let's look at `test/unit/operations/test_utils.py`."
[ 306.0s] 📖 read_file (test/unit/operations/test_utils.py)
[ 306.0s] ✓ {'status': 'ok', 'filepath': 'test/unit/operations/test_utils.py', 'content': 'import unittest\nfrom
xml.etree import El…
[ 340.5s] 💭 (1585 chars) "In `test_build_filter_2`:
```python
def test_build_filter_2(self):
select = "configuration/system"
n..."
[ 340.5s] 🔧 run_command (20 lines) python3 - <<'PY'
[ 340.6s] → Res1: b'<filter xmlns:ns0="http://www.xxx.org" type="xpath" select="configuration/system"/>'
[ 355.9s] 💭 (1060 chars) "Yes, this looks correct. `Res2` is exactly what we want for a simple string path.
Now I will apply the fix to `ncclient..."
[ 355.9s] 📖 read_file (ncclient/operations/util.py)
[ 356.0s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': 'def build_filter(spec,
capcheck=None):\n type…
[ 374.8s] 💭 (866 chars) "The original code:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsm..."
[ 374.8s] ✏️ edit_file (ncclient/operations/util.py)
[ 374.9s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'occurrences': 1, 'strategy': 'exact',
'diff': '--- a/ncclie…
[ 383.3s] 💭 (101 chars) "Now let's verify the fix with a reproduction script and run the existing tests.
Reproduction script:"
[ 383.3s] 🔧 run_command (13 lines) python3 - <<'PY'
[ 383.4s] → Case 1 (string path) success
[ 419.3s] 💭 (205 chars) "The reproduction script now passes for both cases. Now I should run the existing tests for
`ncclient.operations` to make..."
[ 419.3s] 🔧 run_command grep -rn "build_filter" tests/
[ 419.3s] → error (exit 0):
[ 424.3s] 💭 (119 chars) "Wait, I forgot to check the workspace layout. I should check if the tests are in `tests/` or
`test/` or something else."
[ 424.3s] 🔧 run_command find . -maxdepth 2 -name "*test*"
[ 424.3s] → ./test-requirements.txt
[ 426.3s] 💭 (40 chars) "Ah, it's in `./test`. Let me grep there."
[ 426.3s] 🔧 run_command grep -rn "build_filter" test/
[ 426.4s] → test/unit/operations/test_retrieve.py:30: node.append(util.build_filter(root_filter))
[ 430.3s] 💭 (90 chars) "I'll run `test/unit/operations/test_utils.py` and `test/unit/operations/test_retrieve.py`."
[ 430.3s] 🔧 run_command pytest test/unit/operations/test_utils.py test/unit/operations/test_retrieve.py
[ 430.5s] → ============================= test session starts ==============================
[ 436.6s] 💭 (225 chars) "All tests passed. I have successfully reproduced the issue (via script), fixed it, and
verified the fix with the reprodu..."
[ 436.6s] 🔧 run_command git status --short && git diff
[ 436.7s] → M ncclient/operations/util.py
[ 438.0s] 💭 (45 chars) "Everything looks clean. I am ready to submit."
[ 438.0s] 🤖 submit_patch
[ 438.1s] → submit_patch: {"status": "ok", "patch_size": 637, "files_changed": 1}
[ 448.6s] 💭 (299 chars) "I have fixed the regression in `ncclient/operations/util.py` where `build_filter` failed
when `criteria` for an `"xpath"..."
[ 448.6s] ✅ Agent finished: The `build_filter` function in `ncclient/operations/util.py` was updated to handle both
string and tuple inputs for XPath criteria, fixing a regression that caused a `ValueError` when a string was pro...
Native result row
{
"agent_error": null,
"duration_seconds": 452.5,
"error": null,
"grade": {
"collected_tests": 182,
"competition_junit_ok": true,
"error": null,
"required_issues_count": 0,
"resolved": true,
"status_counts": {
"PASSED": 180,
"SKIPPED": 2
},
"strict_clean_patch": true,
"test_exit_code": 0
},
"instance_id": "ncclient__ncclient-418",
"pass_idx": 0,
"patch_chars": 637,
"phase1_seconds": 451.35,
"repo": "ncclient/ncclient",
"request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/ncclient__ncclient-418__p0__r4.jsonl",
"resolved": true,
"rollout_idx": 4,
"run_key": "ncclient__ncclient-418__p0__r4",
"strict_clean_patch": true,
"tool_calls": 27,
"total_llm_calls": 29,
"trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_ncclient__ncclient-418__p0__r4.json"
}