ROLLOUT 3 · ncclient/ncclient
ncclient__ncclient-418
Solved
430 stotal time
28tool calls
32model calls
6,119tokens generated
266,620prompt tokens read
No error recorded
⚠ The request log has 31 model calls but the trace has 33 agent calls, so tokens are listed separately instead of beside each turn.
Turn by turn
Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.
System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`. Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run. ## Critical Environment & Grader Rules 1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`. 2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files. 3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`. 4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks: `pytest path/to/test_file.py -k pattern -q --tb=short --no-header` If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off. 5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission. ## Execution Protocol ### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls) - The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories. - Run a single compound `run_command` with `grep -rn --include="*.py"` to locate: (a) the exact symbols, error strings, or functions from the problem description, (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and (c) the closest existing unit test files under `tests/`. ### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls) - Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests. - Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types. ### Phase 3 — Reproduce Bug in One Call (1 tool call) - Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts. ### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls) - Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`. - Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests. - **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`. ### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls) - Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`. - Run `git status --short && git diff` via `run_command`. Confirm: - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately), - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched), - Minimal, clean diff with valid imports and indentation. - Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 4,220 characters
You are evaluating a software engineering task for repository ncclient/ncclient.
Problem Statement:
Release 0.6.8 xpath filter incompatible with previous releases
The following code used to work in 0.6.7 and earlier,
```
from ncclient import manager
path = '/a/b/c'
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Now this code throws an error
```
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple.
Please consider making this backward compatible, and announce such major changes before releasing it.
## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns
## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.
## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./Changelog
./LICENSE
./MANIFEST.in
./NOTICE
./README.md
./README.rst
./docs
./examples
./ncclient
./ncclient/__init__.py
./ncclient/_version.py
./ncclient/capabilities.py
./ncclient/debug.py
./ncclient/devices
./ncclient/devices/__init__.py
./ncclient/devices/alu.py
./ncclient/devices/csr.py
./ncclient/devices/default.py
./ncclient/devices/h3c.py
./ncclient/devices/hpcomware.py
./ncclient/devices/huawei.py
./ncclient/devices/huaweiyang.py
./ncclient/devices/iosxe.py
./ncclient/devices/iosxr.py
./ncclient/devices/junos.py
./ncclient/devices/nexus.py
./ncclient/logging_.py
./ncclient/manager.py
./ncclient/operations
./ncclient/operations/__init__.py
./ncclient/operations/edit.py
./ncclient/operations/errors.py
./ncclient/operations/flowmon.py
./ncclient/operations/lock.py
./ncclient/operations/retrieve.py
./ncclient/operations/rpc.py
./ncclient/operations/session.py
./ncclient/operations/subscribe.py
./ncclient/operations/third_party
./ncclient/operations/util.py
./ncclient/transport
./ncclient/transport/__init__.py
./ncclient/transport/errors.py
./ncclient/transport/notify.py
./ncclient/transport/parser.py
./ncclient/transport/session.py
./ncclient/transport/ssh.py
./ncclient/transport/third_party
./ncclient/xml_.py
./requirements.txt
./setup.cfg
./setup.py
./test
./test-requirements.txt
./test/__init__.py
./test/unit
./test/unit/__init__.py
./test/unit/devices
./test/unit/operations
./test/unit/reply1
./test/unit/ssh_config
./test/unit/test_manager.py
./test/unit/test_xml_.py
./test/unit/transport
./tox.ini
./versioneer.py
```
Turn 1at 31 s485 tokens out3,280 prompt tokens
The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)` fails if `path` is a string, whereas it used to work in 0.6.7.
The traceback points to `ncclient/operations/util.py`, line 53, in `build_filter`:
`ValueError: too many values to unpack (expected 2)`
`ns, select = criteria`
This suggests that `criteria` is expected to be a tuple (or list) of 2 elements, but it's receiving something else (likely a string if `path = '/a/b/c'`).
Wait, if `path` is a string, and it's being unpacked as `ns, select = criteria`, and it's a string, then it would try to unpack the characters of the string. If the string length is not 2, it will raise `ValueError: too many values to unpack (expected 2)` or `ValueError: not enough values to unpack (expected 2)`.
Let's examine the code in `ncclient/operations/util.py` and `ncclient/operations/retrieve.py`.
The problem statement says:
`reply = m.get('xpath', path)`
Actually, in the code snippet:
```python
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Wait, the traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
```
And `ncclient/manager.py` line 226:
```python
return cls(self._session,
```
And `ncclient/operations/retrieve.py` line 83:
```python
node.append(util.build_filter(filter))
```
Let's look at `ncclient/operations/util.py` first.
TOOL CALL · run_command
{
"command": "grep -rn --include=\"*.py\" \"build_filter\" ncclient/operations/util.py ncclient/operations/retrieve.py"
}Result of run_command 394 characters
{
"status": "ok",
"stdout": "ncclient/operations/util.py:48:def build_filter(spec, capcheck=None):\nncclient/operations/retrieve.py:83: node.append(util.build_filter(filter))\nncclient/operations/retrieve.py:158: node.append(util.build_filter(filter))\nncclient/operations/retrieve.py:237: node.append(util.build_filter(filter))\n",
"stderr": "",
"exit_code": 0
}Turn 2at 35 s84 tokens out3,906 prompt tokens
Okay, `build_filter` is defined in `ncclient/operations/util.py` at line 48. Let's read `ncclient/operations/util.py` around line 48.
TOOL CALL · read_file
{
"end_line": 70,
"filepath": "ncclient/operations/util.py",
"start_line": 40
}Result of read_file 1,381 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"content": " # capcheck(':candidate')\n #elif loc == 'startup':\n # capcheck(':startup')\n #elif loc == 'running' and wha == 'target':\n # capcheck(':writable-running')\n sub_ele(node, loc)\n return node\n\ndef build_filter(spec, capcheck=None):\n type = None\n if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n ns, select = criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n rep = new_ele(\"filter\", type=type)\n rep.append(to_ele(criteria))\n else:\n raise OperationError(\"Invalid filter type\")\n elif isinstance(spec, list):\n rep = new_ele(\"filter\", type=\"subtree\")\n for cri in spec:\n rep.append(to_ele(cri))\n else:\n\n rep = validated_element(spec, (\"filter\", qualify(\"filter\"),\n qualify(\"filter\", ns=NETCONF_NOTIFICATION_NS)))\n # results in XMLError: line 105 ncclient/xml_.py - commented by earies - 5/10/13\n #rep = validated_element(spec, (\"filter\", qualify(\"filter\")),",
"start_line": 40,
"end_line": 70,
"total_lines": 81,
"is_truncated": false
}Turn 3at 56 s320 tokens out4,419 prompt tokens
Here is the code:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
If `spec` is `('xpath', '/a/b/c')`, then `type` is `'xpath'` and `criteria` is `'/a/b/c'`.
Then `ns, select = criteria` is executed.
Since `criteria` is a string `'/a/b/c'`, Python tries to unpack it into two variables `ns` and `select`.
If the string has length 2, it works. If not, it raises `ValueError: too many values to unpack (expected 2)`.
The problem description says:
`reply = m.get('xpath', path)` where `path = '/a/b/c'`.
Wait, if `m.get('xpath', path)` is called, how does it get to `build_filter`?
Let's look at `ncclient/manager.py`.
TOOL CALL · run_command
{
"command": "grep -rn --include=\"*.py\" \"def get\" ncclient/manager.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 4at 66 s152 tokens out4,794 prompt tokens
Ah, `manager` might inherit `get` from somewhere else, or it's a method of `manager.Manager`.
Wait, the problem says `from ncclient import manager; with manager.connect(...) as m: reply = m.get('xpath', path)`.
Let's look at `ncclient/manager.py` for the `Manager` class and its `get` method.
Wait, maybe it's not a method of `Manager` but something else?
Let's find where `get` is defined in `ncclient/manager.py`.
TOOL CALL · run_command
{
"command": "grep -rn \"def get\" ncclient/manager.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 5at 83 s293 tokens out5,001 prompt tokens
Maybe it's defined in `ncclient/operations/retrieve.py` and called from `manager.py`?
The traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
```
Wait, the traceback in the problem description has:
`reply = m.get(filter=('xpath', path))`
But the code snippet before it has:
`reply = m.get('xpath', path)`
If `m.get('xpath', path)` is called, maybe it's calling `m.execute(Retrieve(filter=('xpath', path)))`?
Let's look at `ncclient/manager.py` again. I'll search for `.get(`.
TOOL CALL · run_command
{
"command": "grep -rn \"\\.get(\" ncclient/manager.py"
}Result of run_command 368 characters
{
"status": "ok",
"stdout": "71: handler = device_params.get('handler', None)\n75: device_name = device_params.get(\"name\", \"default\")\n163: device_params = kwds.get('device_params', {})\n164: if host == 'localhost' and device_params.get('name') == 'junos' \\\n165: and device_params.get('local'):\n",
"stderr": "",
"exit_code": 0
}Turn 6at 90 s100 tokens out5,435 prompt tokens
That's just dictionary `.get()`. Maybe `m` is not a `Manager` instance but something else? No, `with manager.connect(...) as m:`. `manager.connect` likely returns a `Manager` instance. Let's find the definition of `connect` in `ncclient/manager.py`.
TOOL CALL · run_command
{
"command": "grep -rn \"def connect\" ncclient/manager.py"
}Result of run_command 200 characters
{
"status": "ok",
"stdout": "102:def connect_ssh(*args, **kwds):\n143:def connect_ioproc(*args, **kwds):\n160:def connect(*args, **kwds):\n317: def connected(self):\n",
"stderr": "",
"exit_code": 0
}Turn 7at 95 s58 tokens out5,631 prompt tokens
Let's look at `ncclient/manager.py` around line 160.
TOOL CALL · read_file
{
"end_line": 250,
"filepath": "ncclient/manager.py",
"start_line": 160
}Result of read_file 3,013 characters
{
"status": "ok",
"filepath": "ncclient/manager.py",
"content": "def connect(*args, **kwds):\n if \"host\" in kwds:\n host = kwds[\"host\"]\n device_params = kwds.get('device_params', {})\n if host == 'localhost' and device_params.get('name') == 'junos' \\\n and device_params.get('local'):\n return connect_ioproc(*args, **kwds)\n else:\n return connect_ssh(*args, **kwds)\n\n\nclass Manager(object):\n\n \"\"\"\n For details on the expected behavior of the operations and their\n parameters refer to :rfc:`6241`.\n\n Manager instances are also context managers so you can use it like this::\n\n with manager.connect(\"host\") as m:\n # do your stuff\n\n ... or like this::\n\n m = manager.connect(\"host\")\n try:\n # do your stuff\n finally:\n m.close_session()\n \"\"\"\n\n # __metaclass__ = OpExecutor\n\n\n HUGE_TREE_DEFAULT = False\n \"\"\"Default for `huge_tree` support for XML parsing of RPC replies (defaults to False)\"\"\"\n\n def __init__(self, session, device_handler, timeout=30):\n self._session = session\n self._async_mode = False\n self._timeout = timeout\n self._raise_mode = operations.RaiseMode.ALL\n self._huge_tree = self.HUGE_TREE_DEFAULT\n self._device_handler = device_handler\n self._vendor_operations = {}\n if device_handler:\n self._vendor_operations.update(device_handler.add_additional_operations())\n\n def __enter__(self):\n return self\n\n def __exit__(self, *args):\n self.close_session()\n return False\n\n def __set_timeout(self, timeout):\n self._timeout = timeout\n\n def __set_async_mode(self, mode):\n self._async_mode = mode\n\n def __set_raise_mode(self, mode):\n assert(mode in (operations.RaiseMode.NONE, operations.RaiseMode.ERRORS, operations.RaiseMode.ALL))\n self._raise_mode = mode\n\n def execute(self, cls, *args, **kwds):\n return cls(self._session,\n device_handler=self._device_handler,\n async_mode=self._async_mode,\n timeout=self._timeout,\n raise_mode=self._raise_mode,\n huge_tree=self._huge_tree).request(*args, **kwds)\n\n def locked(self, target):\n \"\"\"Returns a context manager for a lock on a datastore, where\n *target* is the name of the configuration datastore to lock, e.g.::\n\n with m.locked(\"running\"):\n # do your stuff\n\n ... instead of::\n\n m.lock(\"running\")\n try:\n # do your stuff\n finally:\n m.unlock(\"running\")\n \"\"\"\n return operations.LockContext(self._session, self._device_handler, target)\n\n def scp(self):",
"start_line": 160,
"end_line": 250,
"total_lines": 344,
"is_truncated": false
}Turn 8at 106 s134 tokens out6,585 prompt tokens
I don't see a `get` method in `Manager`. But wait, look at line 187: `# __metaclass__ = OpExecutor`. It's commented out. Wait, if `m.get(...)` is called, where is `get` defined? If `Manager` doesn't have a `get` method, maybe it's using `__getattr__`? Let me check `ncclient/manager.py` for `__getattr__`.
TOOL CALL · run_command
{
"command": "grep \"def __getattr__\" ncclient/manager.py"
}Result of run_command 96 characters
{
"status": "ok",
"stdout": " def __getattr__(self, method):\n",
"stderr": "",
"exit_code": 0
}Turn 9at 108 s42 tokens out6,767 prompt tokens
Let's see `__getattr__` implementation.
TOOL CALL · run_command
{
"command": "grep -n \"def __getattr__\" ncclient/manager.py"
}Result of run_command 100 characters
{
"status": "ok",
"stdout": "256: def __getattr__(self, method):\n",
"stderr": "",
"exit_code": 0
}Turn 10at 111 s56 tokens out6,861 prompt tokens
Let's read `__getattr__` in `ncclient/manager.py`.
TOOL CALL · read_file
{
"end_line": 270,
"filepath": "ncclient/manager.py",
"start_line": 256
}Result of read_file 812 characters
{
"status": "ok",
"filepath": "ncclient/manager.py",
"content": " def __getattr__(self, method):\n if method in self._vendor_operations:\n return functools.partial(self.execute, self._vendor_operations[method])\n elif method in OPERATIONS:\n return functools.partial(self.execute, OPERATIONS[method])\n else:\n \"\"\"Parse args/kwargs correctly in order to build XML element\"\"\"\n def _missing(*args, **kwargs):\n m = method.replace('_', '-')\n root = new_ele(m)\n if args:\n for arg in args:\n sub_ele(root, arg)\n r = self.rpc(root)\n return r",
"start_line": 256,
"end_line": 270,
"total_lines": 344,
"is_truncated": false
}Turn 11at 115 s75 tokens out7,147 prompt tokens
Okay, it uses `OPERATIONS`. Where is `OPERATIONS` defined? It's probably in `ncclient/operations/__init__.py` or similar. Let's look at `ncclient/operations/__init__.py`.
TOOL CALL · read_file
{
"filepath": "ncclient/operations/__init__.py"
}Result of read_file 1,830 characters
{
"status": "ok",
"filepath": "ncclient/operations/__init__.py",
"content": "# Copyright 2009 Shikhar Bhushan\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\nfrom ncclient.operations.errors import OperationError, TimeoutExpiredError, MissingCapabilityError\nfrom ncclient.operations.rpc import RPC, RPCReply, RPCError, RaiseMode\n\n# rfc4741 ops\n\nfrom ncclient.operations.retrieve import Get, GetConfig, GetSchema, GetReply, Dispatch\nfrom ncclient.operations.edit import EditConfig, CopyConfig, DeleteConfig, Validate, Commit, DiscardChanges, CancelCommit\nfrom ncclient.operations.session import CloseSession, KillSession\nfrom ncclient.operations.lock import Lock, Unlock, LockContext\nfrom ncclient.operations.subscribe import CreateSubscription\n\n# others...\nfrom ncclient.operations.flowmon import PoweroffMachine, RebootMachine\n\n__all__ = [\n 'RPC',\n 'RPCReply',\n 'RPCError',\n 'RaiseMode',\n 'Get',\n 'GetConfig',\n 'GetSchema',\n 'Dispatch',\n 'GetReply',\n 'EditConfig',\n 'CopyConfig',\n 'Validate',\n 'Commit',\n 'DiscardChanges',\n 'CancelCommit',\n 'DeleteConfig',\n 'Lock',\n 'Unlock',\n 'CreateSubscription',\n 'PoweroffMachine',\n 'RebootMachine',\n]",
"start_line": 1,
"end_line": 51,
"total_lines": 51,
"is_truncated": false
}Turn 12at 119 s77 tokens out7,749 prompt tokens
I don't see `OPERATIONS` here. Wait, maybe it's imported in `ncclient/manager.py`? Let me check imports in `ncclient/manager.py`.
TOOL CALL · read_file
{
"end_line": 40,
"filepath": "ncclient/manager.py",
"start_line": 1
}Result of read_file 1,516 characters
{
"status": "ok",
"filepath": "ncclient/manager.py",
"content": "# Copyright 2009 Shikhar Bhushan\n# Copyright 2011 Leonidas Poulopoulos\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\n\"\"\"\nThis module is a thin layer of abstraction around the library.\nIt exposes all core functionality.\n\"\"\"\n\nfrom ncclient import operations\nfrom ncclient import transport\nimport logging\nimport functools\n\nfrom ncclient.xml_ import *\n\nlogger = logging.getLogger('ncclient.manager')\n\nOPERATIONS = {\n \"get\": operations.Get,\n \"get_config\": operations.GetConfig,\n \"get_schema\": operations.GetSchema,\n \"dispatch\": operations.Dispatch,\n \"edit_config\": operations.EditConfig,\n \"copy_config\": operations.CopyConfig,\n \"validate\": operations.Validate,\n \"commit\": operations.Commit,\n \"discard_changes\": operations.DiscardChanges,\n \"cancel_commit\": operations.CancelCommit,",
"start_line": 1,
"end_line": 40,
"total_lines": 344,
"is_truncated": false
}Turn 13at 130 s113 tokens out8,257 prompt tokens
Ah, `OPERATIONS` is defined right there in `ncclient/manager.py`.
`"get": operations.Get`
So `m.get('xpath', path)` will execute `operations.Get(self._session, ...).request('xpath', path)`.
Let's look at `ncclient/operations/retrieve.py` and the `Get` class.
TOOL CALL · run_command
{
"command": "grep -n \"class Get\" ncclient/operations/retrieve.py"
}Result of run_command 200 characters
{
"status": "ok",
"stdout": "29:class GetReply(RPCReply):\n56:class GetSchemaReply(GetReply):\n65:class Get(RPC):\n138:class GetConfig(RPC):\n168:class GetSchema(RPC):\n",
"stderr": "",
"exit_code": 0
}Turn 14at 134 s55 tokens out8,462 prompt tokens
`Get` is at line 65. Let's read it.
TOOL CALL · read_file
{
"end_line": 130,
"filepath": "ncclient/operations/retrieve.py",
"start_line": 65
}Result of read_file 2,384 characters
{
"status": "ok",
"filepath": "ncclient/operations/retrieve.py",
"content": "class Get(RPC):\n\n \"The *get* RPC.\"\n\n REPLY_CLS = GetReply\n \"See :class:`GetReply`.\"\n\n def request(self, filter=None, with_defaults=None):\n \"\"\"Retrieve running configuration and device state information.\n\n *filter* specifies the portion of the configuration to retrieve (by default entire configuration is retrieved)\n\n *with_defaults* defines an explicit method of retrieving default values from the configuration (see :rfc:`6243`)\n\n :seealso: :ref:`filter_params`\n \"\"\"\n node = new_ele(\"get\")\n if filter is not None:\n node.append(util.build_filter(filter))\n if with_defaults is not None:\n self._assert(\":with-defaults\")\n _append_with_defaults_mode(\n node,\n with_defaults,\n self._session.server_capabilities,\n )\n return self._request(node)\n\n\ndef _append_with_defaults_mode(node, mode, capabilities):\n _validate_with_defaults_mode(mode, capabilities)\n with_defaults_element = sub_ele_ns(\n node,\n \"with-defaults\",\n NETCONF_WITH_DEFAULTS_NS,\n )\n with_defaults_element.text = mode\n\n\ndef _validate_with_defaults_mode(mode, capabilities):\n valid_modes = _get_valid_with_defaults_modes(capabilities)\n if mode.strip().lower() not in valid_modes:\n raise WithDefaultsError(\n \"Invalid 'with-defaults' mode '{provided}'; the server only \"\n \"supports the following: {options}\".format(\n provided=mode,\n options=', '.join(valid_modes)\n )\n )\n\n\ndef _get_valid_with_defaults_modes(capabilities):\n \"\"\"Reference: https://tools.ietf.org/html/rfc6243#section-4.3\"\"\"\n capability = capabilities[\":with-defaults\"]\n\n try:\n valid_modes = [capability.parameters[\"basic-mode\"]]\n except KeyError:\n raise WithDefaultsError(\n \"Invalid 'with-defaults' capability URI advertised by the server; \"\n \"missing 'basic-mode' parameter\"\n )\n\n try:\n also_supported = capability.parameters[\"also-supported\"]\n except KeyError:",
"start_line": 65,
"end_line": 130,
"total_lines": 239,
"is_truncated": false
}Turn 15at 202 s1,024 tokens out9,195 prompt tokens
In `Get.request(self, filter=None, with_defaults=None)`, if `m.get('xpath', path)` is called, it matches `filter='xpath'` and `with_defaults=path`.
Wait!
`m.get('xpath', path)` -> `Get.request('xpath', path)`.
So `filter='xpath'` and `with_defaults=path`.
Wait, no. If `m.get` is called with two positional arguments, they are passed as `*args` to `request`.
Wait, let's look at how `Manager.execute` calls `request`:
```python
def execute(self, cls, *args, **kwds):
return cls(self._session,
device_handler=self._device_handler,
async_mode=self._async_mode,
timeout=self._timeout,
raise_mode=self._raise_mode,
huge_tree=self._huge_tree).request(*args, **kwds)
```
So `m.get('xpath', path)` becomes `operations.Get(...).request('xpath', path)`.
In `Get.request(self, filter=None, with_defaults=None)`, `filter` becomes `'xpath'` and `with_defaults` becomes `path`.
If `filter` is `'xpath'`, then `util.build_filter('xpath')` is called.
Let's look at `util.build_filter` again.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
# ...
elif isinstance(spec, list):
# ...
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
Wait, if `spec` is `'xpath'`, then it goes to the `else` block. This does not seem to match the traceback.
The traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
In this case, `m.get(filter=('xpath', path))` was called.
So `filter` is `('xpath', path)`.
In `Get.request`, `util.build_filter(filter)` is called with `spec = ('xpath', path)`.
Inside `build_filter`:
`if isinstance(spec, tuple):` is true.
`type, criteria = spec` -> `type = 'xpath'`, `criteria = path`.
If `path = '/a/b/c'`, then `ns, select = criteria` fails because `criteria` is a string of length 7.
The user says:
"The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple."
So the intention is that if `type == "xpath"`, `criteria` should be allowed to be a string (which would imply no namespace, or a default one) or a tuple of `(ns, select)`.
Wait, if `criteria` is a string, what should `ns` and `select` be?
Looking at:
```python
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
If `criteria` is just the xpath string, then `ns` should probably be `None` or an empty dict, and `select` should be `criteria`.
Let's check how `new_ele_nsmap` is implemented to see what `ns` is expected to be.
TOOL CALL · run_command
{
"command": "grep -rn \"def new_ele_nsmap\" ncclient/xml_.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 16at 207 s105 tokens out10,275 prompt tokens
Wait, it might be in `ncclient/xml_.py` but not called `new_ele_nsmap`. Or maybe I should just search for the usage in `util.py` to see where it's imported from. Let's look at the imports in `ncclient/operations/util.py`.
TOOL CALL · read_file
{
"end_line": 40,
"filepath": "ncclient/operations/util.py",
"start_line": 1
}Result of read_file 1,627 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"content": "# Copyright 2009 Shikhar Bhushan\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\n'Boilerplate ugliness'\n\nfrom ncclient.xml_ import *\n\nfrom ncclient.operations.errors import OperationError, MissingCapabilityError\n\ndef one_of(*args):\n \"Verifies that only one of the arguments is not None\"\n for i, arg in enumerate(args):\n if arg is not None:\n for argh in args[i+1:]:\n if argh is not None:\n raise OperationError(\"Too many parameters\")\n else:\n return\n raise OperationError(\"Insufficient parameters\")\n\ndef datastore_or_url(wha, loc, capcheck=None):\n node = new_ele(wha)\n if \"://\" in loc: # e.g. http://, file://, ftp://\n if capcheck is not None:\n capcheck(\":url\") # url schema check at some point!\n sub_ele(node, \"url\").text = loc\n else:\n #if loc == 'candidate':\n # capcheck(':candidate')",
"start_line": 1,
"end_line": 40,
"total_lines": 81,
"is_truncated": false
}Turn 17at 212 s68 tokens out10,857 prompt tokens
It imports `*` from `ncclient.xml_`. Let's find `new_ele_nsmap` in `ncclient/xml_.py`.
TOOL CALL · run_command
{
"command": "grep -rn \"def new_ele_nsmap\" ncclient/xml_.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 18at 219 s128 tokens out10,980 prompt tokens
Wait, why is `grep` failing? Is it spelled correctly?
Let me check `ncclient/operations/util.py` again.
Line 55: `rep = new_ele_nsmap("filter", ns, type=type)`
Wait, maybe it's NOT defined as `def new_ele_nsmap`?
Let me just grep for `new_ele_nsmap` in `ncclient/xml_.py`.
TOOL CALL · run_command
{
"command": "grep \"new_ele_nsmap\" ncclient/xml_.py"
}Result of run_command 166 characters
{
"status": "ok",
"stdout": "new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)\n",
"stderr": "",
"exit_code": 0
}Turn 19at 252 s535 tokens out11,183 prompt tokens
It's a lambda!
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
So `nsmap` is the second argument.
In `util.py`, it was called as `new_ele_nsmap("filter", ns, type=type)`.
So `ns` is passed as `nsmap`. `nsmap` should be a dictionary of namespaces.
If `criteria` was a string, e.g., `'/a/b/c'`, and the user wants it to work as it did in 0.6.7, then we should allow `criteria` to be a string and if so, set `ns = {}` (or `None`) and `select = criteria`.
Let's verify this hypothesis.
In 0.6.7, how did it work?
If `criteria` was a string, then `ns, select = criteria` would only work if `len(criteria) == 2`.
Wait, if the user said it used to work in 0.6.7, maybe the code was different?
Let's see how `build_filter` looked before. Since I don't have 0.6.7, I have to infer.
If `criteria` can be a string or a tuple, we can do:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, `type=type` is passed as a keyword argument to `new_ele_nsmap`.
Let's check `new_ele_nsmap` again:
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
It passes `**extra` to `etree.Element`.
Wait, `etree.Element` doesn't take a `type` argument unless it's part of `attrs`.
Wait, let's see how `new_ele` is defined.
TOOL CALL · run_command
{
"command": "grep \"def new_ele\" ncclient/xml_.py"
}Result of run_command 127 characters
{
"status": "error",
"error_type": "CommandError",
"error_message": "",
"details": {
"stdout": "",
"stderr": "",
"exit_code": 1
}
}Turn 20at 254 s48 tokens out11,773 prompt tokens
Let's just grep for `new_ele` in `ncclient/xml_.py`.
TOOL CALL · run_command
{
"command": "grep \"new_ele =\" ncclient/xml_.py"
}Result of run_command 260 characters
{
"status": "ok",
"stdout": "new_ele = lambda tag, attrs={}, **extra: etree.Element(qualify(tag), attrs, **extra)\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 10 tool call(s) remaining (20/30 used). Finalize your edits and call submit_patch soon."
}Turn 21at 270 s230 tokens out11,923 prompt tokens
Okay, so `new_ele_nsmap` also uses `etree.Element`. Actually, if the user says it worked before, and now it doesn't, and the change is that it's expecting a tuple, then providing a tuple when it's a string should fix it. Let's create a reproduction script to confirm the failure. I need to mock `manager.connect` or just use the `build_filter` function directly since that's where the error is.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom ncclient.operations import util\n\ntry:\n # This should mimic m.get(filter=('xpath', '/a/b/c'))\n util.build_filter(('xpath', '/a/b/c'))\n print(\"SUCCESS\")\nexcept ValueError as e:\n print(f\"FAILURE: {e}\")\nexcept Exception as e:\n print(f\"OTHER ERROR: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 556 characters
{
"status": "ok",
"stdout": "FAILURE: too many values to unpack (expected 2)\n",
"stderr": "/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n from cryptography.hazmat.backends import default_backend\n",
"exit_code": 0,
"budget_warning": "Only 9 tool call(s) remaining (21/30 used). Finalize your edits and call submit_patch soon."
}Turn 22at 297 s554 tokens out12,326 prompt tokens
Confirmed. Now I will modify `ncclient/operations/util.py` to handle the case where `criteria` is a string.
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
I will change it to:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, if `criteria` is a string, should `ns` be `{}` or `None`?
`new_ele_nsmap` is `lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`.
If `nsmap` is `{}`, then `etree.Element` will receive `{}`.
Let's check if `nsmap` can be `None`.
Actually, the most robust way is to check if it's a tuple. If it's not, assume it's the `select` value and set `ns` to an empty dict.
Let's check if there are other places where `build_filter` is used or similar patterns.
In `ncclient/operations/util.py`:
```python
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
```
Here `criteria` is passed to `to_ele`.
Let's refine the fix for `type == "xpath"`.
TOOL CALL · edit_file
{
"filepath": "ncclient/operations/util.py",
"if type == \\\"xpath\\\"": "\\n ns",
"new_string": " if type == \\\"xpath\\\":\\n if isinstance(criteria, tuple):\\n ns, select = criteria\\n else:\\n ns, select = {}, criteria\\n rep = new_ele_nsmap(\\\"filter\\\", ns, type=type)\\n rep.attrib[\\\"select\\\"] = select\\n`,old_string:"
}Result of edit_file 220 characters
{
"error": "Invoking `edit_file()` failed as the following mandatory input parameters are not present:\nold_string\nYou could retry calling this tool, but it is IMPORTANT for you to provide all the mandatory parameters."
}Turn 23at 306 s180 tokens out12,907 prompt tokens
I messed up the `edit_file` call. I put the `if type == "xpath":` in the `filepath` argument.
TOOL CALL · edit_file
{
"filepath": "ncclient/operations/util.py",
"if type == \"xpath\"": "\\n ns",
"new_string": " if type == \"xpath\":\\n if isinstance(criteria, tuple):\\n ns, select = criteria\\n else:\\n ns, select = {}, criteria\\n rep = new_ele_nsmap(\"filter\", ns, type=type)\\n rep.attrib[\"select\"] = select\\n`,old_string:"
}Result of edit_file 220 characters
{
"error": "Invoking `edit_file()` failed as the following mandatory input parameters are not present:\nold_string\nYou could retry calling this tool, but it is IMPORTANT for you to provide all the mandatory parameters."
}Turn 24at 314 s147 tokens out13,117 prompt tokens
Wait, I keep doing that. Let me be careful.
`old_string` should be the exact text in the file.
Current code:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Line 54-57.
Let me use `read_file` again to be absolutely sure about the indentation and content.
TOOL CALL · read_file
{
"end_line": 60,
"filepath": "ncclient/operations/util.py",
"start_line": 50
}Result of read_file 697 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"content": " if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n ns, select = criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n rep = new_ele(\"filter\", type=type)\n rep.append(to_ele(criteria))\n else:\n raise OperationError(\"Invalid filter type\")",
"start_line": 50,
"end_line": 60,
"total_lines": 81,
"is_truncated": false,
"budget_warning": "Only 8 tool call(s) remaining (22/30 used). Finalize your edits and call submit_patch soon."
}Turn 25at 323 s284 tokens out13,488 prompt tokens
Okay.
`old_string` will be:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
`new_string` will be:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
TOOL CALL · edit_file
{
"filepath": "ncclient/operations/util.py",
"new_string": " if type == \"xpath\":\n if isinstance(criteria, tuple):\n ns, select = criteria\n else:\n ns, select = {}, criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select",
"old_string": " if type == \"xpath\":\n ns, select = criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select"
}Result of edit_file 763 characters
{
"status": "ok",
"filepath": "ncclient/operations/util.py",
"occurrences": 1,
"strategy": "exact",
"diff": "--- a/ncclient/operations/util.py\n+++ b/ncclient/operations/util.py\n@@ -50,7 +50,10 @@\n if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n- ns, select = criteria\n+ if isinstance(criteria, tuple):\n+ ns, select = criteria\n+ else:\n+ ns, select = {}, criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n",
"is_truncated": false,
"budget_warning": "Only 7 tool call(s) remaining (23/30 used). Finalize your edits and call submit_patch soon."
}Turn 26at 329 s183 tokens out14,017 prompt tokens
Now let's verify with the reproduction script.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nfrom ncclient.operations import util\n\ntry:\n # This should mimic m.get(filter=('xpath', '/a/b/c'))\n util.build_filter(('xpath', '/a/b/c'))\n print(\"SUCCESS (string path)\")\n \n # This should still work (tuple path)\n util.build_filter(('xpath', ({'ns': 'url'}, '/a/b/c')))\n print(\"SUCCESS (tuple path)\")\nexcept ValueError as e:\n print(f\"FAILURE: {e}\")\nexcept Exception as e:\n print(f\"OTHER ERROR: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 552 characters
{
"status": "ok",
"stdout": "SUCCESS (string path)\nSUCCESS (tuple path)\n",
"stderr": "/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n from cryptography.hazmat.backends import default_backend\n",
"exit_code": 0,
"budget_warning": "Only 6 tool call(s) remaining (24/30 used). Finalize your edits and call submit_patch soon."
}Turn 27at 336 s84 tokens out14,372 prompt tokens
Great. Now I should check if there are any existing tests that I might have broken or any that should be added. Existing tests are in `test/unit/operations`. Let's see if there are any tests for `build_filter` or `Get`.
TOOL CALL · run_command
{
"command": "grep -rn \"build_filter\" test/unit/operations"
}Result of run_command 1,190 characters
{
"status": "ok",
"stdout": "test/unit/operations/test_retrieve.py:30: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:199: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:218: node.append(util.build_filter(root_filter))\ntest/unit/operations/test_retrieve.py:256: node.append(util.build_filter(multi_subtree_filters))\ntest/unit/operations/test_utils.py:55: def test_build_filter(self):\ntest/unit/operations/test_utils.py:56: reply = build_filter(xml)\ntest/unit/operations/test_utils.py:60: def test_build_filter_2(self):\ntest/unit/operations/test_utils.py:65: reply = build_filter(filter)\ntest/unit/operations/test_utils.py:71: def test_build_filter_3(self):\ntest/unit/operations/test_utils.py:78: reply = build_filter(filter, capcheck=\"cap\")\ntest/unit/operations/test_utils.py:84: def test_build_filter_4(self):\ntest/unit/operations/test_utils.py:92: build_filter, filter, capcheck=\"cap\")\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 5 tool call(s) remaining (25/30 used). Finalize your edits and call submit_patch soon."
}Turn 28at 395 s44 tokens out3,759 prompt tokens
Let's check `test/unit/operations/test_utils.py`.
TOOL CALL · read_file
{
"filepath": "test/unit/operations/test_utils.py"
}Result of read_file 3,306 characters
{
"status": "ok",
"filepath": "test/unit/operations/test_utils.py",
"content": "import unittest\nfrom xml.etree import ElementTree\nfrom ncclient.operations.util import *\nfrom mock import MagicMock\n\nxml = \"\"\"<filter type=\"xpath\">\n <configuration>\n <system>\n <services/>\n </system>\n </configuration>\n </filter>\"\"\"\n\n\nclass TestUtils(unittest.TestCase):\n\n def test_one_of_1(self):\n self.assertEqual(one_of(None, 10, None), None)\n\n def test_one_of_2(self):\n self.assertRaises(OperationError,\n one_of, None, 10, 10)\n\n def test_one_of_3(self):\n self.assertRaises(OperationError,\n one_of, None, None)\n\n def test_datastore_url(self):\n node = new_ele(\"target\")\n sub_ele(node, \"candidate\")\n result = ElementTree.tostring(\n datastore_or_url(\n \"target\",\n \"candidate\"))\n self.assertEqual(result, ElementTree.tostring(node))\n\n def test_datastore_url_2(self):\n node = new_ele(\"web\")\n sub_ele(node, \"url\").text = \"http://juniper.net\"\n result = ElementTree.tostring(\n datastore_or_url(\n \"web\",\n \"http://juniper.net\",\n capcheck=MagicMock()))\n self.assertEqual(result, ElementTree.tostring(node))\n\n def test_datastore_url_3(self):\n node = new_ele(\"web\")\n result = ElementTree.tostring(\n datastore_or_url(\n \"web\",\n \"http://juniper.net\"))\n self.assertEqual(result, ElementTree.tostring(node))\n\n def test_build_filter(self):\n reply = build_filter(xml)\n call = ElementTree.tostring(reply)\n self.assertEqual(call, ElementTree.tostring(to_ele(xml)))\n\n def test_build_filter_2(self):\n select = \"configuration/system\"\n ns = {\"ns0\": \"http://www.xxx.org\"}\n criteria = (ns, select)\n filter = (\"xpath\", criteria)\n reply = build_filter(filter)\n call = ElementTree.tostring(reply)\n node = new_ele_nsmap(\"filter\", ns, type=\"xpath\")\n node.attrib[\"select\"] = select\n self.assertEqual(call, ElementTree.tostring(node))\n\n def test_build_filter_3(self):\n criteria = \"\"\"<configuration>\n <system>\n <services/>\n </system>\n </configuration>\"\"\"\n filter = (\"subtree\", criteria)\n reply = build_filter(filter, capcheck=\"cap\")\n call = ElementTree.tostring(reply)\n node = new_ele(\"filter\", type=\"subtree\")\n node.append(to_ele(criteria))\n self.assertEqual(call, ElementTree.tostring(node))\n\n def test_build_filter_4(self):\n criteria = \"\"\"<configuration>\n <system>\n <services/>\n </system>\n </configuration>\"\"\"\n filter = (\"text\", criteria)\n self.assertRaises(OperationError,\n build_filter, filter, capcheck=\"cap\")",
"start_line": 1,
"end_line": 92,
"total_lines": 92,
"is_truncated": false,
"budget_warning": "Only 4 tool call(s) remaining (26/30 used). Finalize your edits and call submit_patch soon."
}Turn 29at 408 s215 tokens out4,806 prompt tokens
The existing `test_build_filter_2` tests the tuple case for xpath:
```python
def test_build_filter_2(self):
select = "configuration/system"
ns = {"ns0": "http://www.xxx.org"}
criteria = (ns, select)
filter = ("xpath", criteria)
reply = build_filter(filter)
call = ElementTree.tostring(reply)
node = new_ele_nsmap("filter", ns, type="xpath")
node.attrib["select"] = select
self.assertEqual(call, ElementTree.tostring(node))
```
And my reproduction script tests the string case and the tuple case.
To be absolutely sure, I'll run all tests in `test/unit/operations`.
TOOL CALL · run_command
{
"command": "pytest test/unit/operations -q --tb=short --no-header"
}Result of run_command 1,816 characters
{
"status": "ok",
"stdout": "============================= test session starts ==============================\ncollected 75 items\n\ntest/unit/operations/test_edit.py ............. [ 17%]\ntest/unit/operations/test_lock.py ...... [ 25%]\ntest/unit/operations/test_retrieve.py ............ [ 41%]\ntest/unit/operations/test_rpc.py ............ [ 57%]\ntest/unit/operations/test_session.py .. [ 60%]\ntest/unit/operations/test_subscribe.py ... [ 64%]\ntest/unit/operations/test_utils.py .......... [ 77%]\ntest/unit/operations/third_party/juniper/test_rpc.py ................. [100%]\n\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32\n /opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n from cryptography.hazmat.backends import default_backend\n\ntest/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported\n /workspace/test/unit/operations/test_retrieve.py:99: DeprecationWarning: Please use assertRaisesRegex instead.\n with_defaults='report-all-tagged'\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n======================== 75 passed, 2 warnings in 0.23s ========================\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 3 tool call(s) remaining (27/30 used). Finalize your edits and call submit_patch soon."
}Turn 30at 412 s41 tokens out5,538 prompt tokens
All tests passed. Let's double check `git status` and `git diff`.
TOOL CALL · run_command
{
"command": "git status --short && git diff"
}Result of run_command 864 characters
{
"status": "ok",
"stdout": " M ncclient/operations/util.py\ndiff --git a/ncclient/operations/util.py b/ncclient/operations/util.py\nindex 0d1bb38..96d73ea 100755\n--- a/ncclient/operations/util.py\n+++ b/ncclient/operations/util.py\n@@ -50,7 +50,10 @@ def build_filter(spec, capcheck=None):\n if isinstance(spec, tuple):\n type, criteria = spec\n if type == \"xpath\":\n- ns, select = criteria\n+ if isinstance(criteria, tuple):\n+ ns, select = criteria\n+ else:\n+ ns, select = {}, criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n elif type == \"subtree\":\n",
"stderr": "",
"exit_code": 0,
"budget_warning": "Only 2 tool call(s) remaining (28/30 used). Finalize your edits and call submit_patch soon."
}Turn 31at 414 s21 tokens out5,875 prompt tokens
Looks correct. I'm ready to submit.
TOOL CALL · submit_patch
Result of submit_patch 55 characters
{
"status": "ok",
"patch_size": 635,
"files_changed": 1
}Turn 32at 427 s184 tokens out5,935 prompt tokens
The issue was a regression in `ncclient` where passing a string instead of a tuple (ns, select) to an XPath filter caused a `ValueError`. I've modified `ncclient/operations/util.py` to handle both cases, defaulting the namespace to an empty dictionary if a string is provided.
Turn 33at 427 s
The regression in `ncclient/operations/util.py` was caused by an assumption that `criteria` for an `'xpath'` filter must always be a tuple of `(ns, select)`. When a string was passed instead, the unpacking operation `ns, select = criteria` failed with a `ValueError`. The fix adds a check to see if `criteria` is a tuple; if not, it treats `criteria` as the `select` value and assigns an empty dictionary to `ns`. This restores backward compatibility for users providing a simple string path for XPath filters.
Model calls (not matched to turns)
Generated tokens 485 tokens · stopped: STOP
The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)` fails if `path` is a string, whereas it used to work in 0.6.7.
The traceback points to `ncclient/operations/util.py`, line 53, in `build_filter`:
`ValueError: too many values to unpack (expected 2)`
`ns, select = criteria`
This suggests that `criteria` is expected to be a tuple (or list) of 2 elements, but it's receiving something else (likely a string if `path = '/a/b/c'`).
Wait, if `path` is a string, and it's being unpacked as `ns, select = criteria`, and it's a string, then it would try to unpack the characters of the string. If the string length is not 2, it will raise `ValueError: too many values to unpack (expected 2)` or `ValueError: not enough values to unpack (expected 2)`.
Let's examine the code in `ncclient/operations/util.py` and `ncclient/operations/retrieve.py`.
The problem statement says:
`reply = m.get('xpath', path)`
Actually, in the code snippet:
```python
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Wait, the traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
```
And `ncclient/manager.py` line 226:
```python
return cls(self._session,
```
And `ncclient/operations/retrieve.py` line 83:
```python
node.append(util.build_filter(filter))
```
Let's look at `ncclient/operations/util.py` first.<|channel>thought
The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)` fails if `path` is a string, whereas it used to work in 0.6.7.
The traceback points to `ncclient/operations/util.py`, line 53, in `build_filter`:
`ValueError: too many values to unpack (expected 2)`
`ns, select = criteria`
This suggests that `criteria` is expected to be a tuple (or list) of 2 elements, but it's receiving something else (likely a string if `path = '/a/b/c'`).
Wait, if `path` is a string, and it's being unpacked as `ns, select = criteria`, and it's a string, then it would try to unpack the characters of the string. If the string length is not 2, it will raise `ValueError: too many values to unpack (expected 2)` or `ValueError: not enough values to unpack (expected 2)`.
Let's examine the code in `ncclient/operations/util.py` and `ncclient/operations/retrieve.py`.
The problem statement says:
`reply = m.get('xpath', path)`
Actually, in the code snippet:
```python
with manager.connect(...) as m:
reply = m.get('xpath', path)
```
Wait, the traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
```
And `ncclient/manager.py` line 226:
```python
return cls(self._session,
```
And `ncclient/operations/retrieve.py` line 83:
```python
node.append(util.build_filter(filter))
```
Let's look at `ncclient/operations/util.py` first.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "build_filter" ncclient/operations/util.py ncclient/operations/retrieve.py<|"|>}<tool_call|><|tool_response>
Generated tokens 84 tokens · stopped: STOP
Okay, `build_filter` is defined in `ncclient/operations/util.py` at line 48. Let's read `ncclient/operations/util.py` around line 48.
Okay, `build_filter` is defined in `ncclient/operations/util.py` at line 48.
Let's read `ncclient/operations/util.py` around line 48.<channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:40,end_line:70}<tool_call|><|tool_response>
Generated tokens 320 tokens · stopped: STOP
Here is the code:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
If `spec` is `('xpath', '/a/b/c')`, then `type` is `'xpath'` and `criteria` is `'/a/b/c'`.
Then `ns, select = criteria` is executed.
Since `criteria` is a string `'/a/b/c'`, Python tries to unpack it into two variables `ns` and `select`.
If the string has length 2, it works. If not, it raises `ValueError: too many values to unpack (expected 2)`.
The problem description says:
`reply = m.get('xpath', path)` where `path = '/a/b/c'`.
Wait, if `m.get('xpath', path)` is called, how does it get to `build_filter`?
Let's look at `ncclient/manager.py`.
Here is the code:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
# ...
```
If `spec` is `('xpath', '/a/b/c')`, then `type` is `'xpath'` and `criteria` is `'/a/b/c'`.
Then `ns, select = criteria` is executed.
Since `criteria` is a string `'/a/b/c'`, Python tries to unpack it into two variables `ns` and `select`.
If the string has length 2, it works. If not, it raises `ValueError: too many values to unpack (expected 2)`.
The problem description says:
`reply = m.get('xpath', path)` where `path = '/a/b/c'`.
Wait, if `m.get('xpath', path)` is called, how does it get to `build_filter`?
Let's look at `ncclient/manager.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "def get" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 152 tokens · stopped: STOP
Ah, `manager` might inherit `get` from somewhere else, or it's a method of `manager.Manager`.
Wait, the problem says `from ncclient import manager; with manager.connect(...) as m: reply = m.get('xpath', path)`.
Let's look at `ncclient/manager.py` for the `Manager` class and its `get` method.
Wait, maybe it's not a method of `Manager` but something else?
Let's find where `get` is defined in `ncclient/manager.py`.
Ah, `manager` might inherit `get` from somewhere else, or it's a method of `manager.Manager`.
Wait, the problem says `from ncclient import manager; with manager.connect(...) as m: reply = m.get('xpath', path)`.
Let's look at `ncclient/manager.py` for the `Manager` class and its `get` method.
Wait, maybe it's not a method of `Manager` but something else?
Let's find where `get` is defined in `ncclient/manager.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def get" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 293 tokens · stopped: STOP
Maybe it's defined in `ncclient/operations/retrieve.py` and called from `manager.py`?
The traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
```
Wait, the traceback in the problem description has:
`reply = m.get(filter=('xpath', path))`
But the code snippet before it has:
`reply = m.get('xpath', path)`
If `m.get('xpath', path)` is called, maybe it's calling `m.execute(Retrieve(filter=('xpath', path)))`?
Let's look at `ncclient/manager.py` again. I'll search for `.get(`.
Maybe it's defined in `ncclient/operations/retrieve.py` and called from `manager.py`?
The traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
```
Wait, the traceback in the problem description has:
`reply = m.get(filter=('xpath', path))`
But the code snippet before it has:
`reply = m.get('xpath', path)`
If `m.get('xpath', path)` is called, maybe it's calling `m.execute(Retrieve(filter=('xpath', path)))`?
Let's look at `ncclient/manager.py` again. I'll search for `.get(`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "\.get(" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 100 tokens · stopped: STOP
That's just dictionary `.get()`. Maybe `m` is not a `Manager` instance but something else? No, `with manager.connect(...) as m:`. `manager.connect` likely returns a `Manager` instance. Let's find the definition of `connect` in `ncclient/manager.py`.
That's just dictionary `.get()`.
Maybe `m` is not a `Manager` instance but something else? No, `with manager.connect(...) as m:`.
`manager.connect` likely returns a `Manager` instance.
Let's find the definition of `connect` in `ncclient/manager.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def connect" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 58 tokens · stopped: STOP
Let's look at `ncclient/manager.py` around line 160.
Let's look at `ncclient/manager.py` around line 160.
<channel|><|tool_call>call:read_file{end_line:250,filepath:<|"|>ncclient/manager.py<|"|>,start_line:160}<tool_call|><|tool_response>
Generated tokens 134 tokens · stopped: STOP
I don't see a `get` method in `Manager`. But wait, look at line 187: `# __metaclass__ = OpExecutor`. It's commented out. Wait, if `m.get(...)` is called, where is `get` defined? If `Manager` doesn't have a `get` method, maybe it's using `__getattr__`? Let me check `ncclient/manager.py` for `__getattr__`.
I don't see a `get` method in `Manager`. But wait, look at line 187: `# __metaclass__ = OpExecutor`. It's commented out.
Wait, if `m.get(...)` is called, where is `get` defined?
If `Manager` doesn't have a `get` method, maybe it's using `__getattr__`?
Let me check `ncclient/manager.py` for `__getattr__`.
<channel|><|tool_call>call:run_command{command:<|"|>grep "def __getattr__" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 42 tokens · stopped: STOP
Let's see `__getattr__` implementation.
Let's see `__getattr__` implementation.
<channel|><|tool_call>call:run_command{command:<|"|>grep -n "def __getattr__" ncclient/manager.py<|"|>}<tool_call|><|tool_response>
Generated tokens 56 tokens · stopped: STOP
Let's read `__getattr__` in `ncclient/manager.py`.
Let's read `__getattr__` in `ncclient/manager.py`.
<channel|><|tool_call>call:read_file{end_line:270,filepath:<|"|>ncclient/manager.py<|"|>,start_line:256}<tool_call|><|tool_response>
Generated tokens 75 tokens · stopped: STOP
Okay, it uses `OPERATIONS`. Where is `OPERATIONS` defined? It's probably in `ncclient/operations/__init__.py` or similar. Let's look at `ncclient/operations/__init__.py`.
Okay, it uses `OPERATIONS`. Where is `OPERATIONS` defined?
It's probably in `ncclient/operations/__init__.py` or similar.
Let's look at `ncclient/operations/__init__.py`.
<channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/__init__.py<|"|>}<tool_call|><|tool_response>
Generated tokens 77 tokens · stopped: STOP
I don't see `OPERATIONS` here. Wait, maybe it's imported in `ncclient/manager.py`? Let me check imports in `ncclient/manager.py`.
I don't see `OPERATIONS` here. Wait, maybe it's imported in `ncclient/manager.py`?
Let me check imports in `ncclient/manager.py`.
<channel|><|tool_call>call:read_file{end_line:40,filepath:<|"|>ncclient/manager.py<|"|>,start_line:1}<tool_call|><|tool_response>
Generated tokens 113 tokens · stopped: STOP
Ah, `OPERATIONS` is defined right there in `ncclient/manager.py`.
`"get": operations.Get`
So `m.get('xpath', path)` will execute `operations.Get(self._session, ...).request('xpath', path)`.
Let's look at `ncclient/operations/retrieve.py` and the `Get` class.
Ah, `OPERATIONS` is defined right there in `ncclient/manager.py`.
`"get": operations.Get`
So `m.get('xpath', path)` will execute `operations.Get(self._session, ...).request('xpath', path)`.
Let's look at `ncclient/operations/retrieve.py` and the `Get` class.
<channel|><|tool_call>call:run_command{command:<|"|>grep -n "class Get" ncclient/operations/retrieve.py<|"|>}<tool_call|><|tool_response>
Generated tokens 55 tokens · stopped: STOP
`Get` is at line 65. Let's read it.
`Get` is at line 65. Let's read it.
<channel|><|tool_call>call:read_file{end_line:130,filepath:<|"|>ncclient/operations/retrieve.py<|"|>,start_line:65}<tool_call|><|tool_response>
Generated tokens 1,024 tokens · stopped: STOP
In `Get.request(self, filter=None, with_defaults=None)`, if `m.get('xpath', path)` is called, it matches `filter='xpath'` and `with_defaults=path`.
Wait!
`m.get('xpath', path)` -> `Get.request('xpath', path)`.
So `filter='xpath'` and `with_defaults=path`.
Wait, no. If `m.get` is called with two positional arguments, they are passed as `*args` to `request`.
Wait, let's look at how `Manager.execute` calls `request`:
```python
def execute(self, cls, *args, **kwds):
return cls(self._session,
device_handler=self._device_handler,
async_mode=self._async_mode,
timeout=self._timeout,
raise_mode=self._raise_mode,
huge_tree=self._huge_tree).request(*args, **kwds)
```
So `m.get('xpath', path)` becomes `operations.Get(...).request('xpath', path)`.
In `Get.request(self, filter=None, with_defaults=None)`, `filter` becomes `'xpath'` and `with_defaults` becomes `path`.
If `filter` is `'xpath'`, then `util.build_filter('xpath')` is called.
Let's look at `util.build_filter` again.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
# ...
elif isinstance(spec, list):
# ...
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
Wait, if `spec` is `'xpath'`, then it goes to the `else` block. This does not seem to match the traceback.
The traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
In this case, `m.get(filter=('xpath', path))` was called.
So `filter` is `('xpath', path)`.
In `Get.request`, `util.build_filter(filter)` is called with `spec = ('xpath', path)`.
Inside `build_filter`:
`if isinstance(spec, tuple):` is true.
`type, criteria = spec` -> `type = 'xpath'`, `criteria = path`.
If `path = '/a/b/c'`, then `ns, select = criteria` fails because `criteria` is a string of length 7.
The user says:
"The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple."
So the intention is that if `type == "xpath"`, `criteria` should be allowed to be a string (which would imply no namespace, or a default one) or a tuple of `(ns, select)`.
Wait, if `criteria` is a string, what should `ns` and `select` be?
Looking at:
```python
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
If `criteria` is just the xpath string, then `ns` should probably be `None` or an empty dict, and `select` should be `criteria`.
Let's check how `new_ele_nsmap` is implemented to see what `ns` is expected to be.In `Get.request(self, filter=None, with_defaults=None)`, if `m.get('xpath', path)` is called, it matches `filter='xpath'` and `with_defaults=path`.
Wait!
`m.get('xpath', path)` -> `Get.request('xpath', path)`.
So `filter='xpath'` and `with_defaults=path`.
Wait, no. If `m.get` is called with two positional arguments, they are passed as `*args` to `request`.
Wait, let's look at how `Manager.execute` calls `request`:
```python
def execute(self, cls, *args, **kwds):
return cls(self._session,
device_handler=self._device_handler,
async_mode=self._async_mode,
timeout=self._timeout,
raise_mode=self._raise_mode,
huge_tree=self._huge_tree).request(*args, **kwds)
```
So `m.get('xpath', path)` becomes `operations.Get(...).request('xpath', path)`.
In `Get.request(self, filter=None, with_defaults=None)`, `filter` becomes `'xpath'` and `with_defaults` becomes `path`.
If `filter` is `'xpath'`, then `util.build_filter('xpath')` is called.
Let's look at `util.build_filter` again.
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
# ...
elif isinstance(spec, list):
# ...
else:
rep = validated_element(spec, ("filter", qualify("filter"),
qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```
Wait, if `spec` is `'xpath'`, then it goes to the `else` block. This does not seem to match the traceback.
The traceback says:
```python
File "test-netconf.py", line 7, in <module>
reply = m.get(filter=('xpath', path))
File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
return cls(self._session,
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
node.append(util.build_filter(filter))
File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
ns, select = criteria
ValueError: too many values to unpack (expected 2)
```
In this case, `m.get(filter=('xpath', path))` was called.
So `filter` is `('xpath', path)`.
In `Get.request`, `util.build_filter(filter)` is called with `spec = ('xpath', path)`.
Inside `build_filter`:
`if isinstance(spec, tuple):` is true.
`type, criteria = spec` -> `type = 'xpath'`, `criteria = path`.
If `path = '/a/b/c'`, then `ns, select = criteria` fails because `criteria` is a string of length 7.
The user says:
"The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple."
So the intention is that if `type == "xpath"`, `criteria` should be allowed to be a string (which would imply no namespace, or a default one) or a tuple of `(ns, select)`.
Wait, if `criteria` is a string, what should `ns` and `select` be?
Looking at:
```python
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
If `criteria` is just the xpath string, then `ns` should probably be `None` or an empty dict, and `select` should be `criteria`.
Let's check how `new_ele_nsmap` is implemented to see what `ns` is expected to be.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def new_ele_nsmap" ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 105 tokens · stopped: STOP
Wait, it might be in `ncclient/xml_.py` but not called `new_ele_nsmap`. Or maybe I should just search for the usage in `util.py` to see where it's imported from. Let's look at the imports in `ncclient/operations/util.py`.
Wait, it might be in `ncclient/xml_.py` but not called `new_ele_nsmap`. Or maybe I should just search for the usage in `util.py` to see where it's imported from.
Let's look at the imports in `ncclient/operations/util.py`.
<channel|><|tool_call>call:read_file{end_line:40,filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:1}<tool_call|><|tool_response>
Generated tokens 68 tokens · stopped: STOP
It imports `*` from `ncclient.xml_`. Let's find `new_ele_nsmap` in `ncclient/xml_.py`.
It imports `*` from `ncclient.xml_`. Let's find `new_ele_nsmap` in `ncclient/xml_.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def new_ele_nsmap" ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 128 tokens · stopped: STOP
Wait, why is `grep` failing? Is it spelled correctly?
Let me check `ncclient/operations/util.py` again.
Line 55: `rep = new_ele_nsmap("filter", ns, type=type)`
Wait, maybe it's NOT defined as `def new_ele_nsmap`?
Let me just grep for `new_ele_nsmap` in `ncclient/xml_.py`.
Wait, why is `grep` failing? Is it spelled correctly?
Let me check `ncclient/operations/util.py` again.
Line 55: `rep = new_ele_nsmap("filter", ns, type=type)`
Wait, maybe it's NOT defined as `def new_ele_nsmap`?
Let me just grep for `new_ele_nsmap` in `ncclient/xml_.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep "new_ele_nsmap" ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 535 tokens · stopped: STOP
It's a lambda!
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
So `nsmap` is the second argument.
In `util.py`, it was called as `new_ele_nsmap("filter", ns, type=type)`.
So `ns` is passed as `nsmap`. `nsmap` should be a dictionary of namespaces.
If `criteria` was a string, e.g., `'/a/b/c'`, and the user wants it to work as it did in 0.6.7, then we should allow `criteria` to be a string and if so, set `ns = {}` (or `None`) and `select = criteria`.
Let's verify this hypothesis.
In 0.6.7, how did it work?
If `criteria` was a string, then `ns, select = criteria` would only work if `len(criteria) == 2`.
Wait, if the user said it used to work in 0.6.7, maybe the code was different?
Let's see how `build_filter` looked before. Since I don't have 0.6.7, I have to infer.
If `criteria` can be a string or a tuple, we can do:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, `type=type` is passed as a keyword argument to `new_ele_nsmap`.
Let's check `new_ele_nsmap` again:
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
It passes `**extra` to `etree.Element`.
Wait, `etree.Element` doesn't take a `type` argument unless it's part of `attrs`.
Wait, let's see how `new_ele` is defined.
It's a lambda!
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
So `nsmap` is the second argument.
In `util.py`, it was called as `new_ele_nsmap("filter", ns, type=type)`.
So `ns` is passed as `nsmap`. `nsmap` should be a dictionary of namespaces.
If `criteria` was a string, e.g., `'/a/b/c'`, and the user wants it to work as it did in 0.6.7, then we should allow `criteria` to be a string and if so, set `ns = {}` (or `None`) and `select = criteria`.
Let's verify this hypothesis.
In 0.6.7, how did it work?
If `criteria` was a string, then `ns, select = criteria` would only work if `len(criteria) == 2`.
Wait, if the user said it used to work in 0.6.7, maybe the code was different?
Let's see how `build_filter` looked before. Since I don't have 0.6.7, I have to infer.
If `criteria` can be a string or a tuple, we can do:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, `type=type` is passed as a keyword argument to `new_ele_nsmap`.
Let's check `new_ele_nsmap` again:
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
It passes `**extra` to `etree.Element`.
Wait, `etree.Element` doesn't take a `type` argument unless it's part of `attrs`.
Wait, let's see how `new_ele` is defined.
<channel|><|tool_call>call:run_command{command:<|"|>grep "def new_ele" ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 48 tokens · stopped: STOP
Let's just grep for `new_ele` in `ncclient/xml_.py`.
Let's just grep for `new_ele` in `ncclient/xml_.py`.
<channel|><|tool_call>call:run_command{command:<|"|>grep "new_ele =" ncclient/xml_.py<|"|>}<tool_call|><|tool_response>
Generated tokens 230 tokens · stopped: STOP
Okay, so `new_ele_nsmap` also uses `etree.Element`. Actually, if the user says it worked before, and now it doesn't, and the change is that it's expecting a tuple, then providing a tuple when it's a string should fix it. Let's create a reproduction script to confirm the failure. I need to mock `manager.connect` or just use the `build_filter` function directly since that's where the error is.
Okay, so `new_ele_nsmap` also uses `etree.Element`.
Actually, if the user says it worked before, and now it doesn't, and the change is that it's expecting a tuple, then providing a tuple when it's a string should fix it.
Let's create a reproduction script to confirm the failure.
I need to mock `manager.connect` or just use the `build_filter` function directly since that's where the error is.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from ncclient.operations import util
try:
# This should mimic m.get(filter=('xpath', '/a/b/c'))
util.build_filter(('xpath', '/a/b/c'))
print("SUCCESS")
except ValueError as e:
print(f"FAILURE: {e}")
except Exception as e:
print(f"OTHER ERROR: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 554 tokens · stopped: STOP
Confirmed. Now I will modify `ncclient/operations/util.py` to handle the case where `criteria` is a string.
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
I will change it to:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, if `criteria` is a string, should `ns` be `{}` or `None`?
`new_ele_nsmap` is `lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`.
If `nsmap` is `{}`, then `etree.Element` will receive `{}`.
Let's check if `nsmap` can be `None`.
Actually, the most robust way is to check if it's a tuple. If it's not, assume it's the `select` value and set `ns` to an empty dict.
Let's check if there are other places where `build_filter` is used or similar patterns.
In `ncclient/operations/util.py`:
```python
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
```
Here `criteria` is passed to `to_ele`.
Let's refine the fix for `type == "xpath"`.
Confirmed. Now I will modify `ncclient/operations/util.py` to handle the case where `criteria` is a string.
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
I will change it to:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Wait, if `criteria` is a string, should `ns` be `{}` or `None`?
`new_ele_nsmap` is `lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`.
If `nsmap` is `{}`, then `etree.Element` will receive `{}`.
Let's check if `nsmap` can be `None`.
Actually, the most robust way is to check if it's a tuple. If it's not, assume it's the `select` value and set `ns` to an empty dict.
Let's check if there are other places where `build_filter` is used or similar patterns.
In `ncclient/operations/util.py`:
```python
elif type == "subtree":
rep = new_ele("filter", type=type)
rep.append(to_ele(criteria))
```
Here `criteria` is passed to `to_ele`.
Let's refine the fix for `type == "xpath"`.
<channel|><|tool_call>call:edit_file{filepath:<|"|>ncclient/operations/util.py<|"|>,new_string:<|"|> if type == \"xpath\":\n if isinstance(criteria, tuple):\n ns, select = criteria\n else:\n ns, select = {}, criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n`,old_string:<|"|> if type == \"xpath\":\n ns, select = criteria\n rep = new_ele_nsmap(\"filter\", ns, type=type)\n rep.attrib[\"select\"] = select\n`}<tool_call|><|tool_response>
Generated tokens 180 tokens · stopped: STOP
I messed up the `edit_file` call. I put the `if type == "xpath":` in the `filepath` argument.
I messed up the `edit_file` call. I put the `if type == "xpath":` in the `filepath` argument.<channel|><|tool_call>call:edit_file{filepath:<|"|>ncclient/operations/util.py<|"|>,new_string:<|"|> if type == "xpath":\n if isinstance(criteria, tuple):\n ns, select = criteria\n else:\n ns, select = {}, criteria\n rep = new_ele_nsmap("filter", ns, type=type)\n rep.attrib["select"] = select\n`,old_string:<|"|> if type == "xpath":\n ns, select = criteria\n rep = new_ele_nsmap("filter", ns, type=type)\n rep.attrib["select"] = select\n`}<tool_call|><|tool_response>
Generated tokens 147 tokens · stopped: STOP
Wait, I keep doing that. Let me be careful.
`old_string` should be the exact text in the file.
Current code:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Line 54-57.
Let me use `read_file` again to be absolutely sure about the indentation and content.
Wait, I keep doing that. Let me be careful.
`old_string` should be the exact text in the file.
Current code:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Line 54-57.
Let me use `read_file` again to be absolutely sure about the indentation and content.
<channel|><|tool_call>call:read_file{end_line:60,filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:50}<tool_call|><|tool_response>
Generated tokens 284 tokens · stopped: STOP
Okay.
`old_string` will be:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
`new_string` will be:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
Okay.
`old_string` will be:
```python
if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
`new_string` will be:
```python
if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
```
<channel|><|tool_call>call:edit_file{filepath:<|"|>ncclient/operations/util.py<|"|>,new_string:<|"|> if type == "xpath":
if isinstance(criteria, tuple):
ns, select = criteria
else:
ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select<|"|>,old_string:<|"|> if type == "xpath":
ns, select = criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select<|"|>}<tool_call|><|tool_response>
Generated tokens 183 tokens · stopped: STOP
Now let's verify with the reproduction script.
Now let's verify with the reproduction script.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
from ncclient.operations import util
try:
# This should mimic m.get(filter=('xpath', '/a/b/c'))
util.build_filter(('xpath', '/a/b/c'))
print("SUCCESS (string path)")
# This should still work (tuple path)
util.build_filter(('xpath', ({'ns': 'url'}, '/a/b/c')))
print("SUCCESS (tuple path)")
except ValueError as e:
print(f"FAILURE: {e}")
except Exception as e:
print(f"OTHER ERROR: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 84 tokens · stopped: STOP
Great. Now I should check if there are any existing tests that I might have broken or any that should be added. Existing tests are in `test/unit/operations`. Let's see if there are any tests for `build_filter` or `Get`.
Great. Now I should check if there are any existing tests that I might have broken or any that should be added.
Existing tests are in `test/unit/operations`. Let's see if there are any tests for `build_filter` or `Get`.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "build_filter" test/unit/operations<|"|>}<tool_call|><|tool_response>
Generated tokens 44 tokens · stopped: STOP
Let's check `test/unit/operations/test_utils.py`.
Let's check `test/unit/operations/test_utils.py`.
<channel|><|tool_call>call:read_file{filepath:<|"|>test/unit/operations/test_utils.py<|"|>}<tool_call|><|tool_response>
Generated tokens 215 tokens · stopped: STOP
The existing `test_build_filter_2` tests the tuple case for xpath:
```python
def test_build_filter_2(self):
select = "configuration/system"
ns = {"ns0": "http://www.xxx.org"}
criteria = (ns, select)
filter = ("xpath", criteria)
reply = build_filter(filter)
call = ElementTree.tostring(reply)
node = new_ele_nsmap("filter", ns, type="xpath")
node.attrib["select"] = select
self.assertEqual(call, ElementTree.tostring(node))
```
And my reproduction script tests the string case and the tuple case.
To be absolutely sure, I'll run all tests in `test/unit/operations`.
The existing `test_build_filter_2` tests the tuple case for xpath:
```python
def test_build_filter_2(self):
select = "configuration/system"
ns = {"ns0": "http://www.xxx.org"}
criteria = (ns, select)
filter = ("xpath", criteria)
reply = build_filter(filter)
call = ElementTree.tostring(reply)
node = new_ele_nsmap("filter", ns, type="xpath")
node.attrib["select"] = select
self.assertEqual(call, ElementTree.tostring(node))
```
And my reproduction script tests the string case and the tuple case.
To be absolutely sure, I'll run all tests in `test/unit/operations`.
<channel|><|tool_call>call:run_command{command:<|"|>pytest test/unit/operations -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Generated tokens 41 tokens · stopped: STOP
All tests passed. Let's double check `git status` and `git diff`.
All tests passed.
Let's double check `git status` and `git diff`.<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 21 tokens · stopped: STOP
Looks correct. I'm ready to submit.
Looks correct. I'm ready to submit.
<channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>
Patch, tests and logs
Final code change Included
diff --git a/ncclient/operations/util.py b/ncclient/operations/util.py
index 0d1bb38..96d73ea 100755
--- a/ncclient/operations/util.py
+++ b/ncclient/operations/util.py
@@ -50,7 +50,10 @@ def build_filter(spec, capcheck=None):
if isinstance(spec, tuple):
type, criteria = spec
if type == "xpath":
- ns, select = criteria
+ if isinstance(criteria, tuple):
+ ns, select = criteria
+ else:
+ ns, select = {}, criteria
rep = new_ele_nsmap("filter", ns, type=type)
rep.attrib["select"] = select
elif type == "subtree":
Test output Included
============================= test session starts ==============================
collecting ... collected 182 items
test/unit/test_manager.py::TestManager::test_connect_exception PASSED [ 0%]
test/unit/test_manager.py::TestManager::test_connect_ioproc PASSED [ 1%]
test/unit/test_manager.py::TestManager::test_connect_outbound_ssh PASSED [ 1%]
test/unit/test_manager.py::TestManager::test_connect_ssh PASSED [ 2%]
test/unit/test_manager.py::TestManager::test_connect_ssh1 PASSED [ 2%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ecdsa PASSED [ 3%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ed25519 PASSED [ 3%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_rsa PASSED [ 4%]
test/unit/test_manager.py::TestManager::test_connect_with_ssh_config PASSED [ 4%]
test/unit/test_manager.py::TestManager::test_ioproc PASSED [ 5%]
test/unit/test_manager.py::TestManager::test_make_device_handler PASSED [ 6%]
test/unit/test_manager.py::TestManager::test_make_device_handler_provided_handler PASSED [ 6%]
test/unit/test_manager.py::TestManager::test_manager_channel_id PASSED [ 7%]
test/unit/test_manager.py::TestManager::test_manager_channel_name PASSED [ 7%]
test/unit/test_manager.py::TestManager::test_manager_channel_session_id PASSED [ 8%]
test/unit/test_manager.py::TestManager::test_manager_client_capability PASSED [ 8%]
test/unit/test_manager.py::TestManager::test_manager_connected PASSED [ 9%]
test/unit/test_manager.py::TestManager::test_manager_getattr PASSED [ 9%]
test/unit/test_manager.py::TestManager::test_manager_getattr2 PASSED [ 10%]
test/unit/test_manager.py::TestManager::test_manager_huge_node PASSED [ 10%]
test/unit/test_manager.py::TestManager::test_manager_locked PASSED [ 11%]
test/unit/test_manager.py::TestManager::test_manager_server_capability PASSED [ 12%]
test/unit/test_manager.py::TestManager::test_manager_take_notification PASSED [ 12%]
test/unit/test_manager.py::TestManager::test_outbound_manager_connected PASSED [ 13%]
test/unit/test_manager.py::TestManager::test_ssh PASSED [ 13%]
test/unit/test_manager.py::TestManager::test_ssh2 PASSED [ 14%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_001 PASSED [ 14%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_002 PASSED [ 15%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_003 PASSED [ 15%]
test/unit/test_xml_.py::TestXML::test_ncelement_find PASSED [ 16%]
test/unit/test_xml_.py::TestXML::test_ncelement_findtext PASSED [ 17%]
test/unit/test_xml_.py::TestXML::test_ncelement_remove_namespace PASSED [ 17%]
test/unit/test_xml_.py::TestXML::test_ncelement_reply_001 PASSED [ 18%]
test/unit/test_xml_.py::TestXML::test_parse_root PASSED [ 18%]
test/unit/test_xml_.py::TestXML::test_sub_ele_inherit_parent_namespace PASSED [ 19%]
test/unit/test_xml_.py::TestXML::test_to_ele PASSED [ 19%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail PASSED [ 20%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail_2 PASSED [ 20%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail_3 PASSED [ 21%]
test/unit/test_xml_.py::TestXML::test_validated_element_pass PASSED [ 21%]
test/unit/devices/test_default.py::TestDefaultDevice::test_get_capabilties PASSED [ 22%]
test/unit/devices/test_default.py::TestDefaultDevice::test_get_ssh_subsystem_names PASSED [ 23%]
test/unit/devices/test_default.py::TestDefaultDevice::test_handle_connection_exceptions PASSED [ 23%]
test/unit/devices/test_default.py::TestDefaultDevice::test_handle_raw_dispatch PASSED [ 24%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_1 PASSED [ 24%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_2 PASSED [ 25%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_3 PASSED [ 25%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_4 PASSED [ 26%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_5 PASSED [ 26%]
test/unit/devices/test_default.py::TestDefaultDevice::test_perform_qualify_check PASSED [ 27%]
test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_device_labels PASSED [ 28%]
test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_devices PASSED [ 28%]
test/unit/devices/test_junos.py::TestJunosDevice::test_additional_operations PASSED [ 29%]
test/unit/devices/test_junos.py::TestJunosDevice::test_handle_connection_exceptions PASSED [ 29%]
test/unit/devices/test_junos.py::TestJunosDevice::test_perform_quality_check PASSED [ 30%]
test/unit/devices/test_junos.py::TestJunosDevice::test_transform_reply PASSED [ 30%]
test/unit/operations/test_edit.py::TestEdit::test_cancel_commit PASSED [ 31%]
test/unit/operations/test_edit.py::TestEdit::test_commit PASSED [ 31%]
test/unit/operations/test_edit.py::TestEdit::test_commit_exception PASSED [ 32%]
test/unit/operations/test_edit.py::TestEdit::test_copy_config PASSED [ 32%]
test/unit/operations/test_edit.py::TestEdit::test_copy_config_2 PASSED [ 33%]
test/unit/operations/test_edit.py::TestEdit::test_delete_config PASSED [ 34%]
test/unit/operations/test_edit.py::TestEdit::test_discard_changes PASSED [ 34%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config PASSED [ 35%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_2 PASSED [ 35%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_invalid_arguments_exception PASSED [ 36%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_validate_capability_exception PASSED [ 36%]
test/unit/operations/test_edit.py::TestEdit::test_validate_config PASSED [ 37%]
test/unit/operations/test_edit.py::TestEdit::test_validate_datastore PASSED [ 37%]
test/unit/operations/test_lock.py::TestLock::test_lock PASSED [ 38%]
test/unit/operations/test_lock.py::TestLock::test_lock_context_enter PASSED [ 39%]
test/unit/operations/test_lock.py::TestLock::test_lock_context_exit PASSED [ 39%]
test/unit/operations/test_lock.py::TestLock::test_lock_default_param PASSED [ 40%]
test/unit/operations/test_lock.py::TestLock::test_unlock PASSED [ 40%]
test/unit/operations/test_lock.py::TestLock::test_unlock_default_param PASSED [ 41%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch PASSED [ 41%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch_2 PASSED [ 42%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get PASSED [ 42%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config PASSED [ 43%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults PASSED [ 43%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults_missing_capability PASSED [ 44%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_schema PASSED [ 45%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_also_supported PASSED [ 45%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_basic_mode PASSED [ 46%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_missing_capability PASSED [ 46%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported PASSED [ 47%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_multi_subtree_filters PASSED [ 47%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_async PASSED [ 48%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_capability_error PASSED [ 48%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_exception PASSED [ 49%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_workaround PASSED [ 50%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply PASSED [ 50%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_exception PASSED [ 51%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_workaround PASSED [ 51%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror PASSED [ 52%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_multiple_errors PASSED [ 52%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_tag_to_attr PASSED [ 53%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_send PASSED [ 53%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_timeout_error PASSED [ 54%]
test/unit/operations/test_session.py::TestSession::test_close_session PASSED [ 54%]
test/unit/operations/test_session.py::TestSession::test_kill_session PASSED [ 55%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_all PASSED [ 56%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_stream PASSED [ 56%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_times PASSED [ 57%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter PASSED [ 57%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_other PASSED [ 58%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_subtree PASSED [ 58%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath PASSED [ 59%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath_ns PASSED [ 59%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url PASSED [ 60%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url_2 PASSED [ 60%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url_3 PASSED [ 61%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_1 PASSED [ 62%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_2 PASSED [ 62%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_3 PASSED [ 63%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_command PASSED [ 63%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit PASSED [ 64%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_at_time PASSED [ 64%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed PASSED [ 65%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed_at_time PASSED [ 65%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_compare_conf PASSED [ 66%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc PASSED [ 67%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc_str PASSED [ 67%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf PASSED [ 68%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf_text_sets_huge_tree PASSED [ 68%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_halt PASSED [ 69%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_json PASSED [ 69%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_list PASSED [ 70%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_set PASSED [ 70%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_text PASSED [ 71%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_xml PASSED [ 71%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_reboot PASSED [ 72%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_multiple_rpc_reply PASSED [ 73%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_rpc_reply PASSED [ 73%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_splited_rpc_reply PASSED [ 74%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on PASSED [ 74%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on_junos_rfc_compliant PASSED [ 75%]
test/unit/transport/test_parser.py::TestSession::test_use_filter_False PASSED [ 75%]
test/unit/transport/test_parser.py::TestSession::test_use_filter_xml_without_sax_input PASSED [ 76%]
test/unit/transport/test_session.py::TestSession::test_add_listener PASSED [ 76%]
test/unit/transport/test_session.py::TestSession::test_add_listener_exception PASSED [ 77%]
test/unit/transport/test_session.py::TestSession::test_client_capability PASSED [ 78%]
test/unit/transport/test_session.py::TestSession::test_connected PASSED [ 78%]
test/unit/transport/test_session.py::TestSession::test_dispatch_error PASSED [ 79%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message PASSED [ 79%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message_error PASSED [ 80%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message_error2 PASSED [ 80%]
test/unit/transport/test_session.py::TestSession::test_get_listener_instance PASSED [ 81%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_build PASSED [ 81%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_error PASSED [ 82%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_ok PASSED [ 82%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_parse PASSED [ 83%]
test/unit/transport/test_session.py::TestSession::test_id PASSED [ 84%]
test/unit/transport/test_session.py::TestSession::test_notification_handler_non_notification PASSED [ 84%]
test/unit/transport/test_session.py::TestSession::test_notification_handler_valid_notification PASSED [ 85%]
test/unit/transport/test_session.py::TestSession::test_post_connect PASSED [ 85%]
test/unit/transport/test_session.py::TestSession::test_post_connect2 PASSED [ 86%]
test/unit/transport/test_session.py::TestSession::test_remove_listener PASSED [ 86%]
test/unit/transport/test_session.py::TestSession::test_send_connected PASSED [ 87%]
test/unit/transport/test_session.py::TestSession::test_send_disconnected PASSED [ 87%]
test/unit/transport/test_session.py::TestSession::test_server_capability PASSED [ 88%]
test/unit/transport/test_session.py::TestSession::test_take_notification PASSED [ 89%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_agent PASSED [ 89%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_agent_exception PASSED [ 90%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles PASSED [ 90%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles_exception PASSED [ 91%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_exception PASSED [ 91%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles PASSED [ 92%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles_exception PASSED [ 92%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_no_methods_exception PASSED [ 93%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_password PASSED [ 93%]
test/unit/transport/test_ssh.py::TestSSH::test_close PASSED [ 94%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key PASSED [ 95%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_2 PASSED [ 95%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_IOError PASSED [ 96%]
test/unit/transport/test_ssh.py::TestSSH::test_parse PASSED [ 96%]
test/unit/transport/test_ssh.py::TestSSH::test_parse11 PASSED [ 97%]
test/unit/transport/test_ssh.py::TestSSH::test_parse_incomplete_delimiter PASSED [ 97%]
test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py2 SKIPPED [ 98%]
test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py3 PASSED [ 98%]
test/unit/transport/test_ssh.py::TestSSH::test_run_send_py2 SKIPPED [ 99%]
test/unit/transport/test_ssh.py::TestSSH::test_run_send_py3 PASSED [100%]
=============================== warnings summary ===============================
../opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32
/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.
from cryptography.hazmat.backends import default_backend
-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
==================================== PASSES ====================================
___________ TestSession.test_filter_xml_delimiter_multiple_rpc_reply ___________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: </rpc-reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]><rpc-reply>
_______________ TestSession.test_filter_xml_delimiter_rpc_reply ________________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: </rpc-reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: lts></rpc-reply>]]>
___________ TestSession.test_filter_xml_delimiter_splited_rpc_reply ____________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: -reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: esults></rpc-reply>]]>
WARNING ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]><rpc-reply>
____________ TestSession.test_filter_xml_sax_on_junos_rfc_compliant ____________
----------------------------- Captured stdout call -----------------------------
<Element multi-routing-engine-results at 0x719ffd73cb90>
___________________ TestSession.test_dispatch_message_error2 ___________________
------------------------------ Captured log call -------------------------------
WARNING ncclient.transport.session:session.py:89 [session 0x719ffd5da150] error dispatching to <ncclient.transport.session.HelloHandler object at 0x719ffd973f10>: Exception()
- generated xml file: /tmp/rebench-grade-0514035221054196a4f5e1de178a18e5.xml --
=========================== short test summary info ============================
PASSED test/unit/test_manager.py::TestManager::test_connect_exception
PASSED test/unit/test_manager.py::TestManager::test_connect_ioproc
PASSED test/unit/test_manager.py::TestManager::test_connect_outbound_ssh
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh1
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ecdsa
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ed25519
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_rsa
PASSED test/unit/test_manager.py::TestManager::test_connect_with_ssh_config
PASSED test/unit/test_manager.py::TestManager::test_ioproc
PASSED test/unit/test_manager.py::TestManager::test_make_device_handler
PASSED test/unit/test_manager.py::TestManager::test_make_device_handler_provided_handler
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_id
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_name
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_session_id
PASSED test/unit/test_manager.py::TestManager::test_manager_client_capability
PASSED test/unit/test_manager.py::TestManager::test_manager_connected
PASSED test/unit/test_manager.py::TestManager::test_manager_getattr
PASSED test/unit/test_manager.py::TestManager::test_manager_getattr2
PASSED test/unit/test_manager.py::TestManager::test_manager_huge_node
PASSED test/unit/test_manager.py::TestManager::test_manager_locked
PASSED test/unit/test_manager.py::TestManager::test_manager_server_capability
PASSED test/unit/test_manager.py::TestManager::test_manager_take_notification
PASSED test/unit/test_manager.py::TestManager::test_outbound_manager_connected
PASSED test/unit/test_manager.py::TestManager::test_ssh
PASSED test/unit/test_manager.py::TestManager::test_ssh2
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_001
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_002
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_003
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_find
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_findtext
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_remove_namespace
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_reply_001
PASSED test/unit/test_xml_.py::TestXML::test_parse_root
PASSED test/unit/test_xml_.py::TestXML::test_sub_ele_inherit_parent_namespace
PASSED test/unit/test_xml_.py::TestXML::test_to_ele
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail_2
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail_3
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_pass
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_get_capabilties
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_get_ssh_subsystem_names
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_handle_connection_exceptions
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_handle_raw_dispatch
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_1
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_2
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_3
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_4
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_5
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_perform_qualify_check
PASSED test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_device_labels
PASSED test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_devices
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_additional_operations
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_handle_connection_exceptions
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_perform_quality_check
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_transform_reply
PASSED test/unit/operations/test_edit.py::TestEdit::test_cancel_commit
PASSED test/unit/operations/test_edit.py::TestEdit::test_commit
PASSED test/unit/operations/test_edit.py::TestEdit::test_commit_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_copy_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_copy_config_2
PASSED test/unit/operations/test_edit.py::TestEdit::test_delete_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_discard_changes
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_2
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_invalid_arguments_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_validate_capability_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_validate_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_validate_datastore
PASSED test/unit/operations/test_lock.py::TestLock::test_lock
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_context_enter
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_context_exit
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_default_param
PASSED test/unit/operations/test_lock.py::TestLock::test_unlock
PASSED test/unit/operations/test_lock.py::TestLock::test_unlock_default_param
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch_2
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults_missing_capability
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_schema
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_also_supported
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_basic_mode
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_missing_capability
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_multi_subtree_filters
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_async
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_capability_error
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_exception
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_workaround
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_exception
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_workaround
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_multiple_errors
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_tag_to_attr
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_send
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_timeout_error
PASSED test/unit/operations/test_session.py::TestSession::test_close_session
PASSED test/unit/operations/test_session.py::TestSession::test_kill_session
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_all
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_stream
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_times
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_other
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_subtree
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath_ns
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url_2
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url_3
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_1
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_2
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_3
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_command
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_at_time
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed_at_time
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_compare_conf
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc_str
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf_text_sets_huge_tree
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_halt
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_json
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_list
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_set
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_text
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_xml
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_reboot
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_multiple_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_splited_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on_junos_rfc_compliant
PASSED test/unit/transport/test_parser.py::TestSession::test_use_filter_False
PASSED test/unit/transport/test_parser.py::TestSession::test_use_filter_xml_without_sax_input
PASSED test/unit/transport/test_session.py::TestSession::test_add_listener
PASSED test/unit/transport/test_session.py::TestSession::test_add_listener_exception
PASSED test/unit/transport/test_session.py::TestSession::test_client_capability
PASSED test/unit/transport/test_session.py::TestSession::test_connected
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_error
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message_error
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message_error2
PASSED test/unit/transport/test_session.py::TestSession::test_get_listener_instance
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_build
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_error
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_ok
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_parse
PASSED test/unit/transport/test_session.py::TestSession::test_id
PASSED test/unit/transport/test_session.py::TestSession::test_notification_handler_non_notification
PASSED test/unit/transport/test_session.py::TestSession::test_notification_handler_valid_notification
PASSED test/unit/transport/test_session.py::TestSession::test_post_connect
PASSED test/unit/transport/test_session.py::TestSession::test_post_connect2
PASSED test/unit/transport/test_session.py::TestSession::test_remove_listener
PASSED test/unit/transport/test_session.py::TestSession::test_send_connected
PASSED test/unit/transport/test_session.py::TestSession::test_send_disconnected
PASSED test/unit/transport/test_session.py::TestSession::test_server_capability
PASSED test/unit/transport/test_session.py::TestSession::test_take_notification
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_agent
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_agent_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_no_methods_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_password
PASSED test/unit/transport/test_ssh.py::TestSSH::test_close
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_2
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_IOError
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse11
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse_incomplete_delimiter
PASSED test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py3
PASSED test/unit/transport/test_ssh.py::TestSSH::test_run_send_py3
SKIPPED [1] test/unit/transport/test_ssh.py:318: test not supported >= Python3
SKIPPED [1] test/unit/transport/test_ssh.py:335: test currently non-functional
================== 180 passed, 2 skipped, 1 warning in 0.50s ===================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite errors="0" failures="0" hostname="f0e2ce5d54f4" name="pytest" skipped="2" tests="182" time="0.494" timestamp="2026-11-14T03:48:56.197614"><testcase classname="test.unit.test_manager.TestManager" name="test_connect_exception" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ioproc" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_outbound_ssh" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh1" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_ecdsa" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_ed25519" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_rsa" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_with_ssh_config" time="0.003" /><testcase classname="test.unit.test_manager.TestManager" name="test_ioproc" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_make_device_handler" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_make_device_handler_provided_handler" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_id" time="0.003" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_name" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_session_id" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_client_capability" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_connected" time="0.015" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_getattr" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_getattr2" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_huge_node" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_locked" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_server_capability" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_take_notification" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_outbound_manager_connected" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_ssh" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_ssh2" time="0.002" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_001" time="0.001" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_002" time="0.000" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_003" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_find" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_findtext" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_remove_namespace" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_reply_001" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_parse_root" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_sub_ele_inherit_parent_namespace" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_to_ele" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail_2" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail_3" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_pass" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_get_capabilties" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_get_ssh_subsystem_names" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_handle_connection_exceptions" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_handle_raw_dispatch" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_1" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_2" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_3" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_4" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_5" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_perform_qualify_check" time="0.000" /><testcase classname="test.unit.devices.test_get_supported_devices.TestGetSupportedDevices" name="test_get_supported_device_labels" time="0.000" /><testcase classname="test.unit.devices.test_get_supported_devices.TestGetSupportedDevices" name="test_get_supported_devices" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_additional_operations" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_handle_connection_exceptions" time="0.001" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_perform_quality_check" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_transform_reply" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_cancel_commit" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_commit" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_commit_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_copy_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_copy_config_2" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_delete_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_discard_changes" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_2" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_invalid_arguments_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_validate_capability_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_validate_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_validate_datastore" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_context_enter" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_context_exit" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_default_param" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_unlock" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_unlock_default_param" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_dispatch" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_dispatch_2" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config_with_defaults" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config_with_defaults_missing_capability" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_schema" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_also_supported" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_basic_mode" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_missing_capability" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_not_supported" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_multi_subtree_filters" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_async" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_capability_error" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_huge_text_node_exception" time="0.008" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_huge_text_node_workaround" time="0.065" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply_huge_text_node_exception" time="0.004" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply_huge_text_node_workaround" time="0.004" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror" time="0.002" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror_multiple_errors" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror_tag_to_attr" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_send" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_timeout_error" time="0.001" /><testcase classname="test.unit.operations.test_session.TestSession" name="test_close_session" time="0.001" /><testcase classname="test.unit.operations.test_session.TestSession" name="test_kill_session" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_all" time="0.000" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_stream" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_times" time="0.001" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_other" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_subtree" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_xpath" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_xpath_ns" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url_2" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url_3" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_1" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_2" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_3" time="0.000" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_command" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_at_time" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_confirmed" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_confirmed_at_time" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_compare_conf" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_execute_rpc" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_execute_rpc_str" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_getconf" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_getconf_text_sets_huge_tree" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_halt" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_json" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_list" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_set" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_text" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_xml" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_reboot" time="0.001" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_multiple_rpc_reply" time="0.006" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_rpc_reply" time="0.021" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_splited_rpc_reply" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_sax_on" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_sax_on_junos_rfc_compliant" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_use_filter_False" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_use_filter_xml_without_sax_input" time="0.005" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_add_listener" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_add_listener_exception" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_client_capability" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_connected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_error" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message_error" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message_error2" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_get_listener_instance" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_build" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_callback_error" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_callback_ok" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_parse" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_id" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_notification_handler_non_notification" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_notification_handler_valid_notification" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_post_connect" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_post_connect2" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_remove_listener" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_send_connected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_send_disconnected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_server_capability" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_take_notification" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_agent" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_agent_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_default_keyfiles" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_default_keyfiles_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_keyfiles" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_keyfiles_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_no_methods_exception" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_password" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_close" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key_2" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key_IOError" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse11" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse_incomplete_delimiter" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_receive_py2" time="0.000"><skipped message="test not supported >= Python3" type="pytest.skip">/testbed/test/unit/transport/test_ssh.py:318: test not supported >= Python3</skipped></testcase><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_receive_py3" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_send_py2" time="0.000"><skipped message="test currently non-functional" type="pytest.skip">/testbed/test/unit/transport/test_ssh.py:335: test currently non-functional</skipped></testcase><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_send_py3" time="0.001" /></testsuite></testsuites>
Agent log Included
[ 0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
[ 0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository ncclient/ncclient.
[ 30.2s] 💭 (1416 chars) "The user is reporting a regression in `ncclient` version 0.6.8 where `m.get('xpath', path)`
fails if `path` is a string,..."
[ 30.2s] 🔧 run_command grep -rn --include="*.py" "build_filter" ncclient/operations/util.py ncclient/op
[ 30.3s] → ncclient/operations/util.py:48:def build_filter(spec, capcheck=None):
[ 34.9s] 💭 (133 chars) "Okay, `build_filter` is defined in `ncclient/operations/util.py` at line 48.
Let's read `ncclient/operations/util.py` ar..."
[ 34.9s] 📖 read_file (ncclient/operations/util.py)
[ 35.0s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': ' #
capcheck(\':candidate\')\n #…
[ 55.9s] 💭 (912 chars) "Here is the code:
```python
def build_filter(spec, capcheck=None):
type = None
if isinstance(spec, tuple):
..."
[ 55.9s] 🔧 run_command grep -rn --include="*.py" "def get" ncclient/manager.py
[ 56.0s] → error (exit 0):
[ 65.9s] 💭 (417 chars) "Ah, `manager` might inherit `get` from somewhere else, or it's a method of
`manager.Manager`.
Wait, the problem says `fr..."
[ 65.9s] 🔧 run_command grep -rn "def get" ncclient/manager.py
[ 65.9s] → error (exit 0):
[ 82.6s] 💭 (804 chars) "Maybe it's defined in `ncclient/operations/retrieve.py` and called from `manager.py`?
The traceback says:
```python
Fi..."
[ 82.6s] 🔧 run_command grep -rn "\.get(" ncclient/manager.py
[ 82.6s] → 71: handler = device_params.get('handler', None)
[ 89.5s] 💭 (250 chars) "That's just dictionary `.get()`.
Maybe `m` is not a `Manager` instance but something else? No, `with manager.connect(....."
[ 89.5s] 🔧 run_command grep -rn "def connect" ncclient/manager.py
[ 89.5s] → 102:def connect_ssh(*args, **kwds):
[ 94.4s] 💭 (52 chars) "Let's look at `ncclient/manager.py` around line 160."
[ 94.4s] 📖 read_file (ncclient/manager.py)
[ 94.4s] ✓ {'status': 'ok', 'filepath': 'ncclient/manager.py', 'content': 'def connect(*args, **kwds):\n if
"host" in kwds:\n …
[ 106.0s] 💭 (307 chars) "I don't see a `get` method in `Manager`. But wait, look at line 187: `# __metaclass__ =
OpExecutor`. It's commented out...."
[ 106.0s] 🔧 run_command grep "def __getattr__" ncclient/manager.py
[ 106.0s] → def __getattr__(self, method):
[ 107.7s] 💭 (39 chars) "Let's see `__getattr__` implementation."
[ 107.7s] 🔧 run_command grep -n "def __getattr__" ncclient/manager.py
[ 107.8s] → 256: def __getattr__(self, method):
[ 110.2s] 💭 (50 chars) "Let's read `__getattr__` in `ncclient/manager.py`."
[ 110.2s] 📖 read_file (ncclient/manager.py)
[ 110.2s] ✓ {'status': 'ok', 'filepath': 'ncclient/manager.py', 'content': ' def __getattr__(self, method):\n
if method in…
[ 114.7s] 💭 (171 chars) "Okay, it uses `OPERATIONS`. Where is `OPERATIONS` defined?
It's probably in `ncclient/operations/__init__.py` or similar..."
[ 114.7s] 📖 read_file (ncclient/operations/__init__.py)
[ 114.7s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/__init__.py', 'content': '# Copyright 2009 Shikhar
Bhushan\n#\n# Licen…
[ 118.0s] 💭 (129 chars) "I don't see `OPERATIONS` here. Wait, maybe it's imported in `ncclient/manager.py`?
Let me check imports in `ncclient/man..."
[ 118.0s] 📖 read_file (ncclient/manager.py)
[ 118.1s] ✓ {'status': 'ok', 'filepath': 'ncclient/manager.py', 'content': '# Copyright 2009 Shikhar Bhushan\n#
Copyright 2011 Leoni…
[ 129.5s] 💭 (259 chars) "Ah, `OPERATIONS` is defined right there in `ncclient/manager.py`.
`"get": operations.Get`
So `m.get('xpath', path)` wil..."
[ 129.5s] 🔧 run_command grep -n "class Get" ncclient/operations/retrieve.py
[ 129.5s] → 29:class GetReply(RPCReply):
[ 133.9s] 💭 (35 chars) "`Get` is at line 65. Let's read it."
[ 133.9s] 📖 read_file (ncclient/operations/retrieve.py)
[ 133.9s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/retrieve.py', 'content': 'class Get(RPC):\n\n "The
*get* RPC."\n\n …
[ 201.7s] 💭 (3287 chars) "In `Get.request(self, filter=None, with_defaults=None)`, if `m.get('xpath', path)` is
called, it matches `filter='xpath'..."
[ 201.7s] 🔧 run_command grep -rn "def new_ele_nsmap" ncclient/xml_.py
[ 201.7s] → error (exit 0):
[ 206.7s] 💭 (222 chars) "Wait, it might be in `ncclient/xml_.py` but not called `new_ele_nsmap`. Or maybe I should
just search for the usage in `..."
[ 206.7s] 📖 read_file (ncclient/operations/util.py)
[ 206.8s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': '# Copyright 2009 Shikhar
Bhushan\n#\n# Licensed …
[ 211.1s] 💭 (86 chars) "It imports `*` from `ncclient.xml_`. Let's find `new_ele_nsmap` in `ncclient/xml_.py`."
[ 211.1s] 🔧 run_command grep -rn "def new_ele_nsmap" ncclient/xml_.py
[ 211.1s] → error (exit 0):
[ 218.5s] 💭 (274 chars) "Wait, why is `grep` failing? Is it spelled correctly?
Let me check `ncclient/operations/util.py` again.
Line 55: `rep = ..."
[ 218.5s] 🔧 run_command grep "new_ele_nsmap" ncclient/xml_.py
[ 218.5s] → new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)
[ 251.4s] 💭 (1551 chars) "It's a lambda!
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)..."
[ 251.4s] 🔧 run_command grep "def new_ele" ncclient/xml_.py
[ 251.5s] → error (exit 0):
[ 253.1s] 💭 (52 chars) "Let's just grep for `new_ele` in `ncclient/xml_.py`."
[ 253.1s] 🔧 run_command grep "new_ele =" ncclient/xml_.py
[ 253.1s] → new_ele = lambda tag, attrs={}, **extra: etree.Element(qualify(tag), attrs, **extra)
[ 269.9s] 💭 (395 chars) "Okay, so `new_ele_nsmap` also uses `etree.Element`.
Actually, if the user says it worked before, and now it doesn't, and..."
[ 269.9s] 🔧 run_command (12 lines) python3 - <<'PY'
[ 270.0s] → FAILURE: too many values to unpack (expected 2)
[ 296.5s] 💭 (1340 chars) "Confirmed. Now I will modify `ncclient/operations/util.py` to handle the case where
`criteria` is a string.
```python
..."
[ 296.5s] ✏️ edit_file (ncclient/operations/util.py)
[ 296.5s] ❌ {'error': 'Invoking `edit_file()` failed as the following mandatory input parameters are not
present:\nold_string\nYou c…
[ 305.4s] 💭 (93 chars) "I messed up the `edit_file` call. I put the `if type == "xpath":` in the `filepath`
argument."
[ 305.4s] ✏️ edit_file (ncclient/operations/util.py)
[ 305.4s] ❌ {'error': 'Invoking `edit_file()` failed as the following mandatory input parameters are not
present:\nold_string\nYou c…
[ 313.8s] 💭 (383 chars) "Wait, I keep doing that. Let me be careful.
`old_string` should be the exact text in the file.
Current code:
```python
..."
[ 313.8s] 📖 read_file (ncclient/operations/util.py)
[ 313.8s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': ' if isinstance(spec,
tuple):\n type, c…
[ 322.2s] 💭 (509 chars) "Okay.
`old_string` will be:
```python
if type == "xpath":
ns, select = criteria
rep = n..."
[ 322.2s] ✏️ edit_file (ncclient/operations/util.py)
[ 322.4s] ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'occurrences': 1, 'strategy': 'exact',
'diff': '--- a/ncclie…
[ 328.4s] 💭 (46 chars) "Now let's verify with the reproduction script."
[ 328.4s] 🔧 run_command (16 lines) python3 - <<'PY'
[ 328.5s] → SUCCESS (string path)
[ 335.3s] 💭 (219 chars) "Great. Now I should check if there are any existing tests that I might have broken or any
that should be added.
Existing..."
[ 335.3s] 🔧 run_command grep -rn "build_filter" test/unit/operations
[ 335.3s] → test/unit/operations/test_retrieve.py:30: node.append(util.build_filter(root_filter))
[ 394.5s] 💭 (49 chars) "Let's check `test/unit/operations/test_utils.py`."
[ 394.5s] 📖 read_file (test/unit/operations/test_utils.py)
[ 394.6s] ✓ {'status': 'ok', 'filepath': 'test/unit/operations/test_utils.py', 'content': 'import unittest\nfrom
xml.etree import El…
[ 407.1s] 💭 (642 chars) "The existing `test_build_filter_2` tests the tuple case for xpath:
```python
def test_build_filter_2(self):
..."
[ 407.1s] 🔧 run_command pytest test/unit/operations -q --tb=short --no-header
[ 407.6s] → ============================= test session starts ==============================
[ 411.9s] 💭 (66 chars) "All tests passed.
Let's double check `git status` and `git diff`."
[ 411.9s] 🔧 run_command git status --short && git diff
[ 412.0s] → M ncclient/operations/util.py
[ 413.4s] 💭 (35 chars) "Looks correct. I'm ready to submit."
[ 413.4s] 🤖 submit_patch
[ 413.5s] → submit_patch: {"status": "ok", "patch_size": 635, "files_changed": 1}
[ 426.3s] 💭 (276 chars) "The issue was a regression in `ncclient` where passing a string instead of a tuple (ns,
select) to an XPath filter cause..."
[ 426.3s] ✅ Agent finished: The regression in `ncclient/operations/util.py` was caused by an assumption that
`criteria` for an `'xpath'` filter must always be a tuple of `(ns, select)`. When a string was passed instead, the
unpa...
Native result row
{
"agent_error": null,
"duration_seconds": 430.11,
"error": null,
"grade": {
"collected_tests": 182,
"competition_junit_ok": true,
"error": null,
"required_issues_count": 0,
"resolved": true,
"status_counts": {
"PASSED": 180,
"SKIPPED": 2
},
"strict_clean_patch": true,
"test_exit_code": 0
},
"instance_id": "ncclient__ncclient-418",
"pass_idx": 0,
"patch_chars": 635,
"phase1_seconds": 429.02,
"repo": "ncclient/ncclient",
"request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/ncclient__ncclient-418__p0__r3.jsonl",
"resolved": true,
"rollout_idx": 3,
"run_key": "ncclient__ncclient-418__p0__r3",
"strict_clean_patch": true,
"tool_calls": 28,
"total_llm_calls": 32,
"trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_ncclient__ncclient-418__p0__r3.json"
}