← 31B real rollouts · 480 (exact stack, 32 lanes, 13-Nov)

ROLLOUT 2 · ncclient/ncclient

ncclient__ncclient-418

Solved

454 stotal time

24tool calls

24model calls

6,512tokens generated

192,206prompt tokens read

Agent exceeded session timeout (7.5 min)

Turn by turn

Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.

System instructions 4,822 characters

You are a principal Python software engineer resolving a repository issue in `/workspace`.
Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run.

## Critical Environment & Grader Rules
1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`.
2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files.
3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`.
4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks:
`pytest path/to/test_file.py -k pattern -q --tb=short --no-header`
If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off.
5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission.

## Execution Protocol

### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls)
- The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories.
- Run a single compound `run_command` with `grep -rn --include="*.py"` to locate:
(a) the exact symbols, error strings, or functions from the problem description,
(b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and
(c) the closest existing unit test files under `tests/`.

### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls)
- Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests.
- Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types.

### Phase 3 — Reproduce Bug in One Call (1 tool call)
- Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts.

### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls)
- Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`.
- Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests.
- **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`.

### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls)
- Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`.
- Run `git status --short && git diff` via `run_command`. Confirm:
- ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately),
- ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched),
- Minimal, clean diff with valid imports and indentation.
- Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.

Task prompt 4,220 characters

You are evaluating a software engineering task for repository ncclient/ncclient.

Problem Statement:
Release 0.6.8 xpath filter incompatible with previous releases
The following code used to work in 0.6.7 and earlier,

```
from ncclient import manager

path = '/a/b/c'

with manager.connect(...) as m:
    reply = m.get('xpath', path)
```
Now this code throws an error
```
  File "test-netconf.py", line 7, in <module>
    reply = m.get(filter=('xpath', path))
  File "/usr/local/lib/python3.8/site-packages/ncclient/manager.py", line 226, in execute
    return cls(self._session,
  File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
    node.append(util.build_filter(filter))
  File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
    ns, select = criteria
ValueError: too many values to unpack (expected 2)
```

The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple.

Please consider making this backward compatible, and announce such major changes before releasing it.

## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns

## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.

## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./Changelog
./LICENSE
./MANIFEST.in
./NOTICE
./README.md
./README.rst
./docs
./examples
./ncclient
./ncclient/__init__.py
./ncclient/_version.py
./ncclient/capabilities.py
./ncclient/debug.py
./ncclient/devices
./ncclient/devices/__init__.py
./ncclient/devices/alu.py
./ncclient/devices/csr.py
./ncclient/devices/default.py
./ncclient/devices/h3c.py
./ncclient/devices/hpcomware.py
./ncclient/devices/huawei.py
./ncclient/devices/huaweiyang.py
./ncclient/devices/iosxe.py
./ncclient/devices/iosxr.py
./ncclient/devices/junos.py
./ncclient/devices/nexus.py
./ncclient/logging_.py
./ncclient/manager.py
./ncclient/operations
./ncclient/operations/__init__.py
./ncclient/operations/edit.py
./ncclient/operations/errors.py
./ncclient/operations/flowmon.py
./ncclient/operations/lock.py
./ncclient/operations/retrieve.py
./ncclient/operations/rpc.py
./ncclient/operations/session.py
./ncclient/operations/subscribe.py
./ncclient/operations/third_party
./ncclient/operations/util.py
./ncclient/transport
./ncclient/transport/__init__.py
./ncclient/transport/errors.py
./ncclient/transport/notify.py
./ncclient/transport/parser.py
./ncclient/transport/session.py
./ncclient/transport/ssh.py
./ncclient/transport/third_party
./ncclient/xml_.py
./requirements.txt
./setup.cfg
./setup.py
./test
./test-requirements.txt
./test/__init__.py
./test/unit
./test/unit/__init__.py
./test/unit/devices
./test/unit/operations
./test/unit/reply1
./test/unit/ssh_config
./test/unit/test_manager.py
./test/unit/test_xml_.py
./test/unit/transport
./tox.ini
./versioneer.py
```

Turn 1at 30 s474 tokens out3,280 prompt tokens

The user is reporting a breaking change in `ncclient` version 0.6.8 where `m.get('xpath', path)` now fails if `path` is a string, whereas it used to work.
The traceback indicates the error happens in `ncclient/operations/util.py` in `build_filter`.

Traceback analysis:
`File "test-netconf.py", line 7, in <module>`
`reply = m.get(filter=('xpath', path))`
Wait, the problem statement says:
`reply = m.get('xpath', path)`
But the traceback says:
`reply = m.get(filter=('xpath', path))`

And the error is:
`File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter`
`ns, select = criteria`
`ValueError: too many values to unpack (expected 2)`

If `filter` was `('xpath', path)` and `path` is a string, `criteria` would be `('xpath', path)`. Unpacking this into `ns, select` should work if `criteria` is a tuple of 2 elements.

Wait, look at the traceback again:
`File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request`
`node.append(util.build_filter(filter))`

If `filter` is `('xpath', path)`, then `util.build_filter(filter)` is called.
If `filter` is a string like `/a/b/c`, it might be treated differently.
Actually, if the user calls `m.get('xpath', path)`, it's likely that `filter` is passed as `('xpath', path)`.

Let's look at `ncclient/operations/util.py` around line 53.

TOOL CALL · run_command

{
  "command": "grep -rn --include=\"*.py\" \"build_filter\" ncclient/operations/ | grep \"util.py\""
}

Result of run_command 131 characters

{
  "status": "ok",
  "stdout": "ncclient/operations/util.py:48:def build_filter(spec, capcheck=None):\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 474 tokens · stopped: STOP

<|channel>thought The user is reporting a breaking change in `ncclient` version 0.6.8 where `m.get('xpath', path)` now fails if `path` is a string, whereas it used to work. The traceback indicates the error happens in `ncclient/operations/util.py` in `build_filter`. Traceback analysis: `File "test-netconf.py", line 7, in <module>` `reply = m.get(filter=('xpath', path))` Wait, the problem statement says: `reply = m.get('xpath', path)` But the traceback says: `reply = m.get(filter=('xpath', path))` And the error is: `File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter` `ns, select = criteria` `ValueError: too many values to unpack (expected 2)` If `filter` was `('xpath', path)` and `path` is a string, `criteria` would be `('xpath', path)`. Unpacking this into `ns, select` should work if `criteria` is a tuple of 2 elements. Wait, look at the traceback again: `File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request` `node.append(util.build_filter(filter))` If `filter` is `('xpath', path)`, then `util.build_filter(filter)` is called. If `filter` is a string like `/a/b/c`, it might be treated differently. Actually, if the user calls `m.get('xpath', path)`, it's likely that `filter` is passed as `('xpath', path)`. Let's look at `ncclient/operations/util.py` around line 53.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "build_filter" ncclient/operations/ | grep "util.py"<|"|>}<tool_call|><|tool_response>

Turn 2at 33 s53 tokens out3,818 prompt tokens

Okay, let's read `ncclient/operations/util.py`.

TOOL CALL · read_file

{
  "end_line": 70,
  "filepath": "ncclient/operations/util.py",
  "start_line": 40
}

Result of read_file 1,381 characters

{
  "status": "ok",
  "filepath": "ncclient/operations/util.py",
  "content": "        #    capcheck(':candidate')\n        #elif loc == 'startup':\n        #    capcheck(':startup')\n        #elif loc == 'running' and wha == 'target':\n        #    capcheck(':writable-running')\n        sub_ele(node, loc)\n    return node\n\ndef build_filter(spec, capcheck=None):\n    type = None\n    if isinstance(spec, tuple):\n        type, criteria = spec\n        if type == \"xpath\":\n            ns, select = criteria\n            rep = new_ele_nsmap(\"filter\", ns, type=type)\n            rep.attrib[\"select\"] = select\n        elif type == \"subtree\":\n            rep = new_ele(\"filter\", type=type)\n            rep.append(to_ele(criteria))\n        else:\n            raise OperationError(\"Invalid filter type\")\n    elif isinstance(spec, list):\n        rep = new_ele(\"filter\", type=\"subtree\")\n        for cri in spec:\n            rep.append(to_ele(cri))\n    else:\n\n        rep = validated_element(spec, (\"filter\", qualify(\"filter\"),\n                                       qualify(\"filter\", ns=NETCONF_NOTIFICATION_NS)))\n        # results in XMLError: line 105 ncclient/xml_.py - commented by earies - 5/10/13\n        #rep = validated_element(spec, (\"filter\", qualify(\"filter\")),",
  "start_line": 40,
  "end_line": 70,
  "total_lines": 81,
  "is_truncated": false
}

Generated tokens 53 tokens · stopped: STOP

Okay, let's read `ncclient/operations/util.py`.<channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:40,end_line:70}<tool_call|><|tool_response>

Turn 3at 65 s491 tokens out4,300 prompt tokens

Ah, I see the problem.
In `build_filter`:
```python
def build_filter(spec, capcheck=None):
    type = None
    if isinstance(spec, tuple):
        type, criteria = spec
        if type == "xpath":
            ns, select = criteria
            rep = new_ele_nsmap("filter", ns, type=type)
            rep.attrib["select"] = select
```
If `spec` is `('xpath', '/a/b/c')`, then:
`type = 'xpath'`
`criteria = '/a/b/c'`
Then `ns, select = criteria` will try to unpack the string `/a/b/c`, which has more than 2 characters, resulting in `ValueError: too many values to unpack (expected 2)`.

Wait, the traceback said:
`ValueError: too many values to unpack (expected 2)`
And the line was `ns, select = criteria`.

So, if the user wants to use an xpath filter, they now HAVE to provide `criteria` as a tuple `(ns, select)`.
But if the user provided `('xpath', path)`, and `path` is a string, it fails.

The user says:
"The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple."

So we need to handle the case where `criteria` is a string for `type == "xpath"`. If it's a string, it probably means `ns` should be `None` (or empty) and `select` should be that string.

Let's see how `new_ele_nsmap` handles `ns=None`.
I need to find where `new_ele_nsmap` is defined. It's probably in `ncclient/operations/util.py` or `ncclient/xml_.py`.

TOOL CALL · run_command

{
  "command": "grep -rn \"def new_ele_nsmap\" ncclient/ | grep \"util.py\" || grep -rn \"def new_ele_nsmap\" ncclient/ | grep \"xml_.py\""
}

Result of run_command 127 characters

{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "",
  "details": {
    "stdout": "",
    "stderr": "",
    "exit_code": 1
  }
}

Generated tokens 491 tokens · stopped: STOP

Ah, I see the problem. In `build_filter`: ```python def build_filter(spec, capcheck=None): type = None if isinstance(spec, tuple): type, criteria = spec if type == "xpath": ns, select = criteria rep = new_ele_nsmap("filter", ns, type=type) rep.attrib["select"] = select ``` If `spec` is `('xpath', '/a/b/c')`, then: `type = 'xpath'` `criteria = '/a/b/c'` Then `ns, select = criteria` will try to unpack the string `/a/b/c`, which has more than 2 characters, resulting in `ValueError: too many values to unpack (expected 2)`. Wait, the traceback said: `ValueError: too many values to unpack (expected 2)` And the line was `ns, select = criteria`. So, if the user wants to use an xpath filter, they now HAVE to provide `criteria` as a tuple `(ns, select)`. But if the user provided `('xpath', path)`, and `path` is a string, it fails. The user says: "The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple." So we need to handle the case where `criteria` is a string for `type == "xpath"`. If it's a string, it probably means `ns` should be `None` (or empty) and `select` should be that string. Let's see how `new_ele_nsmap` handles `ns=None`. I need to find where `new_ele_nsmap` is defined. It's probably in `ncclient/operations/util.py` or `ncclient/xml_.py`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def new_ele_nsmap" ncclient/ | grep "util.py" || grep -rn "def new_ele_nsmap" ncclient/ | grep "xml_.py"<|"|>}<tool_call|><|tool_response>

Turn 4at 69 s49 tokens out4,846 prompt tokens

I'll just search for `new_ele_nsmap` in `ncclient`.

TOOL CALL · run_command

{
  "command": "grep -rn \"new_ele_nsmap\" ncclient/"
}

Result of run_command 278 characters

{
  "status": "ok",
  "stdout": "ncclient/xml_.py:231:new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)\nncclient/operations/util.py:54:            rep = new_ele_nsmap(\"filter\", ns, type=type)\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 49 tokens · stopped: STOP

I'll just search for `new_ele_nsmap` in `ncclient`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "new_ele_nsmap" ncclient/<|"|>}<tool_call|><|tool_response>

Turn 5at 106 s428 tokens out5,012 prompt tokens

It's a lambda in `ncclient/xml_.py`.

Now let's see what happens if `ns` is a string instead of a map?
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
It calls `qualify(tag)`.
Wait, look at the `build_filter` code again.

```python
        if type == "xpath":
            ns, select = criteria
            rep = new_ele_nsmap("filter", ns, type=type)
            rep.attrib["select"] = select
```

If `criteria` was just a string `path`, then we want `ns` to be `None` (or `{}`) and `select` to be `path`.

Let's verify if `ns` is expected to be a map.
In `ncclient/xml_.py`, `qualify` is likely used.

Let's try to reproduce this first. I'll create a script that mocks the manager and calls `build_filter` or I can try to use `ncclient` if there's a way to avoid connecting to a real device.

Actually, I can just call `build_filter` directly from `ncclient.operations.util`.

TOOL CALL · run_command

{
  "command": "python3 - <<'PY'\nfrom ncclient.operations import util\ntry:\n    # This is what the user said worked in 0.6.7: path as a string\n    # m.get('xpath', path) likely results in spec = ('xpath', path)\n    spec = ('xpath', '/a/b/c')\n    util.build_filter(spec)\n    print(\"Success\")\nexcept Exception as e:\n    print(f\"Failure: {e}\")\n    import traceback\n    traceback.print_exc()\nPY\n"
}

Result of run_command 676 characters

{
  "status": "ok",
  "stdout": "Failure: too many values to unpack (expected 2)\n",
  "stderr": "/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n  from cryptography.hazmat.backends import default_backend\nTraceback (most recent call last):\n  File \"<stdin>\", line 6, in <module>\n  File \"/workspace/ncclient/operations/util.py\", line 53, in build_filter\n    ns, select = criteria\nValueError: too many values to unpack (expected 2)\n",
  "exit_code": 0
}

Generated tokens 428 tokens · stopped: STOP

It's a lambda in `ncclient/xml_.py`. Now let's see what happens if `ns` is a string instead of a map? `new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)` It calls `qualify(tag)`. Wait, look at the `build_filter` code again. ```python if type == "xpath": ns, select = criteria rep = new_ele_nsmap("filter", ns, type=type) rep.attrib["select"] = select ``` If `criteria` was just a string `path`, then we want `ns` to be `None` (or `{}`) and `select` to be `path`. Let's verify if `ns` is expected to be a map. In `ncclient/xml_.py`, `qualify` is likely used. Let's try to reproduce this first. I'll create a script that mocks the manager and calls `build_filter` or I can try to use `ncclient` if there's a way to avoid connecting to a real device. Actually, I can just call `build_filter` directly from `ncclient.operations.util`. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' from ncclient.operations import util try: # This is what the user said worked in 0.6.7: path as a string # m.get('xpath', path) likely results in spec = ('xpath', path) spec = ('xpath', '/a/b/c') util.build_filter(spec) print("Success") except Exception as e: print(f"Failure: {e}") import traceback traceback.print_exc() PY <|"|>}<tool_call|><|tool_response>

Turn 6at 112 s141 tokens out5,650 prompt tokens

Reproduction successful.

Now, if I pass a tuple as `criteria`, does it work?

TOOL CALL · run_command

{
  "command": "python3 - <<'PY'\nfrom ncclient.operations import util\ntry:\n    # This is what the code currently expects: a tuple for criteria\n    spec = ('xpath', ({'ns': 'uri'}, '/a/b/c'))\n    util.build_filter(spec)\n    print(\"Success with tuple\")\nexcept Exception as e:\n    print(f\"Failure: {e}\")\n    import traceback\n    traceback.print_exc()\nPY\n"
}

Result of run_command 414 characters

{
  "status": "ok",
  "stdout": "Success with tuple\n",
  "stderr": "/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n  from cryptography.hazmat.backends import default_backend\n",
  "exit_code": 0
}

Generated tokens 141 tokens · stopped: STOP

Reproduction successful. Now, if I pass a tuple as `criteria`, does it work? <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' from ncclient.operations import util try: # This is what the code currently expects: a tuple for criteria spec = ('xpath', ({'ns': 'uri'}, '/a/b/c')) util.build_filter(spec) print("Success with tuple") except Exception as e: print(f"Failure: {e}") import traceback traceback.print_exc() PY <|"|>}<tool_call|><|tool_response>

Turn 7at 154 s567 tokens out5,921 prompt tokens

Okay, so if `criteria` is a tuple, it works. If it's a string, it fails.

We want it to work with a string too. If it's a string, we can treat it as `(None, string)`.

Let's check `ncclient/operations/util.py` again.

```python
def build_filter(spec, capcheck=None):
    type = None
    if isinstance(spec, tuple):
        type, criteria = spec
        if type == "xpath":
            ns, select = criteria
            rep = new_ele_nsmap("filter", ns, type=type)
            rep.attrib["select"] = select
```

Wait, if `criteria` is a tuple, `ns` and `select` are extracted.
If `criteria` is a string, we should set `ns = None` and `select = criteria`.

Wait, let's see what `ns` is expected to be. In my success case, I passed `({'ns': 'uri'}, '/a/b/c')`. So `ns` is a dictionary.

If `criteria` is a string, we should assume `ns` is `None` or `{}`.

Let's refine `build_filter` in `ncclient/operations/util.py`.

```python
        if type == "xpath":
            if isinstance(criteria, tuple):
                ns, select = criteria
            else:
                ns, select = None, criteria
            rep = new_ele_nsmap("filter", ns, type=type)
            rep.attrib["select"] = select
```

Wait, let's see if there are any other places where `build_filter` is used or if there are other `type` values.
`type == "subtree"` uses `criteria` as is:
```python
        elif type == "subtree":
            rep = new_ele("filter", type=type)
            rep.append(to_ele(criteria))
```
`to_ele` likely handles the conversion.

Let's check if there are any other types.
`else: raise OperationError("Invalid filter type")`

So just `xpath` and `subtree`.

Wait, the user said "the current document still so specifies" (referring to `path` being a string).

Let's check how `manager.get` calls this.
In `ncclient/manager.py`.

TOOL CALL · run_command

{
  "command": "grep -rn \"def get(\" ncclient/manager.py"
}

Result of run_command 127 characters

{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "",
  "details": {
    "stdout": "",
    "stderr": "",
    "exit_code": 1
  }
}

Generated tokens 567 tokens · stopped: STOP

Okay, so if `criteria` is a tuple, it works. If it's a string, it fails. We want it to work with a string too. If it's a string, we can treat it as `(None, string)`. Let's check `ncclient/operations/util.py` again. ```python def build_filter(spec, capcheck=None): type = None if isinstance(spec, tuple): type, criteria = spec if type == "xpath": ns, select = criteria rep = new_ele_nsmap("filter", ns, type=type) rep.attrib["select"] = select ``` Wait, if `criteria` is a tuple, `ns` and `select` are extracted. If `criteria` is a string, we should set `ns = None` and `select = criteria`. Wait, let's see what `ns` is expected to be. In my success case, I passed `({'ns': 'uri'}, '/a/b/c')`. So `ns` is a dictionary. If `criteria` is a string, we should assume `ns` is `None` or `{}`. Let's refine `build_filter` in `ncclient/operations/util.py`. ```python if type == "xpath": if isinstance(criteria, tuple): ns, select = criteria else: ns, select = None, criteria rep = new_ele_nsmap("filter", ns, type=type) rep.attrib["select"] = select ``` Wait, let's see if there are any other places where `build_filter` is used or if there are other `type` values. `type == "subtree"` uses `criteria` as is: ```python elif type == "subtree": rep = new_ele("filter", type=type) rep.append(to_ele(criteria)) ``` `to_ele` likely handles the conversion. Let's check if there are any other types. `else: raise OperationError("Invalid filter type")` So just `xpath` and `subtree`. Wait, the user said "the current document still so specifies" (referring to `path` being a string). Let's check how `manager.get` calls this. In `ncclient/manager.py`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def get(" ncclient/manager.py<|"|>}<tool_call|><|tool_response>

Turn 8at 155 s37 tokens out6,543 prompt tokens

Maybe it's just `get`.

TOOL CALL · run_command

{
  "command": "grep -rn \"def get\" ncclient/manager.py"
}

Result of run_command 127 characters

{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "",
  "details": {
    "stdout": "",
    "stderr": "",
    "exit_code": 1
  }
}

Generated tokens 37 tokens · stopped: STOP

Maybe it's just `get`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "def get" ncclient/manager.py<|"|>}<tool_call|><|tool_response>

Turn 9at 160 s47 tokens out6,635 prompt tokens

Wait, maybe it's a method of a class. Let's look at `ncclient/manager.py`.

TOOL CALL · read_file

{
  "filepath": "ncclient/manager.py"
}

Result of read_file 6,062 characters

{
  "status": "ok",
  "filepath": "ncclient/manager.py",
  "content": "# Copyright 2009 Shikhar Bhushan\n# Copyright 2011 Leonidas Poulopoulos\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n#    http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\n\"\"\"\nThis module is a thin layer of abstraction around the library.\nIt exposes all core functionality.\n\"\"\"\n\nfrom ncclient import operations\nfrom ncclient import transport\nimport logging\nimport functools\n\nfrom ncclient.xml_ import *\n\nlogger = logging.getLogger('ncclient.manager')\n\nOPERATIONS = {\n    \"get\": operations.Get,\n    \"get_config\": operations.GetConfig,\n    \"get_schema\": operations.GetSchema,\n    \"dispatch\": operations.Dispatch,\n    \"edit_config\": operations.EditConfig,\n    \"copy_config\": operations.CopyConfig,\n    \"validate\": operations.Validate,\n    \"commit\": operations.Commit,\n    \"discard_changes\": operations.DiscardChanges,\n    \"cancel_commit\": operations.CancelCommit,\n    \"delete_config\": operations.DeleteConfig,\n    \"lock\": operations.Lock,\n    \"unlock\": operations.Unlock,\n    \"create_subscription\": operations.CreateSubscription,\n    \"close_session\": operations.CloseSession,\n    \"kill_session\": operations.KillSession,\n    \"poweroff_machine\": operations.PoweroffMachine,\n    \"reboot_machine\": operations.RebootMachine,\n}\n\n\"\"\"\nDictionary of base method names and corresponding :class:`~ncclient.operations.RPC`\nsubclasses. It is used to lookup operations, e.g. `get_config` is mapped to\n:class:`~ncclient.operations.GetConfig`. It is thus possible to add additional\noperations to the :class:`Manager` API.\n\"\"\"\n\n\ndef make_device_handler(device_params):\n    \"\"\"\n    Create a device handler object that provides device specific parameters and\n    functions, which are called in various places throughout our code.\n\n    If no device_params are defined or the \"name\" in the parameter dict is not\n    known then a default handler will be returned.\n\n    \"\"\"\n    if device_params is None:\n        device_params = {}\n\n    handler = device_params.get('handler', None)\n    if handler:\n        return handler(device_params)\n\n    device_name = device_params.get(\"name\", \"default\")\n    # Attempt to import device handler class. All device handlers are\n    # in a module called \"ncclient.devices.<devicename>\" and in a class named\n    # \"<devicename>DeviceHandler\", with the first letter capitalized.\n    class_name          = \"%sDeviceHandler\" % device_name.capitalize()\n    devices_module_name = \"ncclient.devices.%s\" % device_name\n    dev_module_obj      = __import__(devices_module_name)\n    handler_module_obj  = getattr(getattr(dev_module_obj, \"devices\"), device_name)\n    class_obj           = getattr(handler_module_obj, class_name)\n    handler_obj         = class_obj(device_params)\n    return handler_obj\n\n\ndef _extract_device_params(kwds):\n    device_params = kwds.pop(\"device_params\", None)\n\n    return device_params\n\ndef _extract_manager_params(kwds):\n    manager_params = kwds.pop(\"manager_params\", {})\n\n    # To maintain backward compatibility\n    if 'timeout' not in manager_params and 'timeout' in kwds:\n        manager_params['timeout'] = kwds['timeout']\n    return manager_params\n\n\ndef connect_ssh(*args, **kwds):\n    \"\"\"\n    Initialize a :class:`Manager` over the SSH transport.\n    For documentation of arguments see :meth:`ncclient.transport.SSHSession.connect`.\n\n    The underlying :class:`ncclient.transport.SSHSession` is created with\n    :data:`CAPABILITIES`. It is first instructed to\n    :meth:`~ncclient.transport.SSHSession.load_known_hosts` and then\n    all the provided arguments are passed directly to its implementation\n    of :meth:`~ncclient.transport.SSHSession.connect`.\n\n    To customize the :class:`Manager`, add a `manager_params` dictionary in connection\n    parameters (e.g. `manager_params={'timeout': 60}` for a bigger RPC timeout parameter)\n\n    To invoke advanced vendor related operation add\n    `device_params={'name': '<vendor_alias>'}` in connection parameters. For the time,\n    'junos' and 'nexus' are supported for Juniper and Cisco Nexus respectively.\n\n    A custom device handler can be provided with\n    `device_params={'handler':<handler class>}` in connection parameters.\n    \"\"\"\n    # Extract device parameter and manager parameter dictionaries, if they were passed into this function.\n    # Remove them from kwds (which should keep only session.connect() parameters).\n    device_params = _extract_device_params(kwds)\n    manager_params = _extract_manager_params(kwds)\n\n    device_handler = make_device_handler(device_params)\n    device_handler.add_additional_ssh_connect_params(kwds)\n    session = transport.SSHSession(device_handler)\n    if \"hostkey_verify\" not in kwds or kwds[\"hostkey_verify\"]:\n        session.load_known_hosts()\n\n    try:\n       session.connect(*args, **kwds)\n    except Exception as ex:\n        if session.transport:\n            session.close()\n        raise\n    return Manager(session, device_handler, **manager_params)\n\n\ndef connect_ioproc(*args, **kwds):\n    device_params = _extract_device_params(kwds)\n    manager_params = _extract_manager_params(kwds)\n\n    if device_params:\n        import_string = 'ncclient.transport.third_party.'\n        import_string += device_params['name'] + '.ioproc'\n        third_party_import = __import__(import_string, fromlist=['IOProc'])",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 344,
  "is_truncated": true
}

Generated tokens 47 tokens · stopped: STOP

Wait, maybe it's a method of a class. Let's look at `ncclient/manager.py`. <channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/manager.py<|"|>}<tool_call|><|tool_response>

Turn 10at 164 s54 tokens out8,372 prompt tokens

I need to find the `Manager` class. I'll read the rest of `ncclient/manager.py`.

TOOL CALL · read_file

{
  "filepath": "ncclient/manager.py`,start_line:151"
}

Result of read_file 435 characters

{
  "status": "error",
  "error_type": "FileReadError",
  "error_message": "404 Client Error for http+docker://localhost/v1.52/containers/cfff022be88a6d88c143e9b0cfc2ac51db621191d6df67c0ca86b66134e15b66/archive?path=%2Fworkspace%2Fncclient%2Fmanager.py%60%2Cstart_line%3A151: Not Found (\"Could not find the file /workspace/ncclient/manager.py`,start_line:151 in container cfff022be88a6d88c143e9b0cfc2ac51db621191d6df67c0ca86b66134e15b66\")"
}

Generated tokens 54 tokens · stopped: STOP

I need to find the `Manager` class. I'll read the rest of `ncclient/manager.py`. <channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/manager.py`,start_line:151}<tool_call|><|tool_response>

Turn 11at 176 s175 tokens out8,660 prompt tokens

Whoops, I forgot that `read_file` doesn't work like that if I don't specify `start_line` and `end_line` correctly or if there's a bug in the tool. Wait, I just passed `start_line: 151`. That should work.

Actually, look at the error: `.../archive?path=%2Fworkspace%2Fncclient%2Fmanager.py%60%2Cstart_line%3A151`. It seems it appended the arguments to the path.

Let me try again with both `start_line` and `end_line`.

TOOL CALL · read_file

{
  "end_line": 344,
  "filepath": "ncclient/manager.py`,start_line:151"
}

Result of read_file 435 characters

{
  "status": "error",
  "error_type": "FileReadError",
  "error_message": "404 Client Error for http+docker://localhost/v1.52/containers/cfff022be88a6d88c143e9b0cfc2ac51db621191d6df67c0ca86b66134e15b66/archive?path=%2Fworkspace%2Fncclient%2Fmanager.py%60%2Cstart_line%3A151: Not Found (\"Could not find the file /workspace/ncclient/manager.py`,start_line:151 in container cfff022be88a6d88c143e9b0cfc2ac51db621191d6df67c0ca86b66134e15b66\")"
}

Generated tokens 175 tokens · stopped: STOP

Whoops, I forgot that `read_file` doesn't work like that if I don't specify `start_line` and `end_line` correctly or if there's a bug in the tool. Wait, I just passed `start_line: 151`. That should work. Actually, look at the error: `.../archive?path=%2Fworkspace%2Fncclient%2Fmanager.py%60%2Cstart_line%3A151`. It seems it appended the arguments to the path. Let me try again with both `start_line` and `end_line`. <channel|><|tool_call>call:read_file{end_line:344,filepath:<|"|>ncclient/manager.py`,start_line:151}<tool_call|><|tool_response>

Turn 12at 187 s101 tokens out9,069 prompt tokens

Wait, why is it failing? Ah, I might have a typo in my tool call or the tool is broken. No, it looks like I'm using it as specified.

Wait, I just realized I might be hitting a limit or something. Let me try to read the file in one go if it's not too large. It's 344 lines.

TOOL CALL · read_file

{
  "filepath": "ncclient/manager.py"
}

Result of read_file 6,062 characters

{
  "status": "ok",
  "filepath": "ncclient/manager.py",
  "content": "# Copyright 2009 Shikhar Bhushan\n# Copyright 2011 Leonidas Poulopoulos\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n#    http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\n\"\"\"\nThis module is a thin layer of abstraction around the library.\nIt exposes all core functionality.\n\"\"\"\n\nfrom ncclient import operations\nfrom ncclient import transport\nimport logging\nimport functools\n\nfrom ncclient.xml_ import *\n\nlogger = logging.getLogger('ncclient.manager')\n\nOPERATIONS = {\n    \"get\": operations.Get,\n    \"get_config\": operations.GetConfig,\n    \"get_schema\": operations.GetSchema,\n    \"dispatch\": operations.Dispatch,\n    \"edit_config\": operations.EditConfig,\n    \"copy_config\": operations.CopyConfig,\n    \"validate\": operations.Validate,\n    \"commit\": operations.Commit,\n    \"discard_changes\": operations.DiscardChanges,\n    \"cancel_commit\": operations.CancelCommit,\n    \"delete_config\": operations.DeleteConfig,\n    \"lock\": operations.Lock,\n    \"unlock\": operations.Unlock,\n    \"create_subscription\": operations.CreateSubscription,\n    \"close_session\": operations.CloseSession,\n    \"kill_session\": operations.KillSession,\n    \"poweroff_machine\": operations.PoweroffMachine,\n    \"reboot_machine\": operations.RebootMachine,\n}\n\n\"\"\"\nDictionary of base method names and corresponding :class:`~ncclient.operations.RPC`\nsubclasses. It is used to lookup operations, e.g. `get_config` is mapped to\n:class:`~ncclient.operations.GetConfig`. It is thus possible to add additional\noperations to the :class:`Manager` API.\n\"\"\"\n\n\ndef make_device_handler(device_params):\n    \"\"\"\n    Create a device handler object that provides device specific parameters and\n    functions, which are called in various places throughout our code.\n\n    If no device_params are defined or the \"name\" in the parameter dict is not\n    known then a default handler will be returned.\n\n    \"\"\"\n    if device_params is None:\n        device_params = {}\n\n    handler = device_params.get('handler', None)\n    if handler:\n        return handler(device_params)\n\n    device_name = device_params.get(\"name\", \"default\")\n    # Attempt to import device handler class. All device handlers are\n    # in a module called \"ncclient.devices.<devicename>\" and in a class named\n    # \"<devicename>DeviceHandler\", with the first letter capitalized.\n    class_name          = \"%sDeviceHandler\" % device_name.capitalize()\n    devices_module_name = \"ncclient.devices.%s\" % device_name\n    dev_module_obj      = __import__(devices_module_name)\n    handler_module_obj  = getattr(getattr(dev_module_obj, \"devices\"), device_name)\n    class_obj           = getattr(handler_module_obj, class_name)\n    handler_obj         = class_obj(device_params)\n    return handler_obj\n\n\ndef _extract_device_params(kwds):\n    device_params = kwds.pop(\"device_params\", None)\n\n    return device_params\n\ndef _extract_manager_params(kwds):\n    manager_params = kwds.pop(\"manager_params\", {})\n\n    # To maintain backward compatibility\n    if 'timeout' not in manager_params and 'timeout' in kwds:\n        manager_params['timeout'] = kwds['timeout']\n    return manager_params\n\n\ndef connect_ssh(*args, **kwds):\n    \"\"\"\n    Initialize a :class:`Manager` over the SSH transport.\n    For documentation of arguments see :meth:`ncclient.transport.SSHSession.connect`.\n\n    The underlying :class:`ncclient.transport.SSHSession` is created with\n    :data:`CAPABILITIES`. It is first instructed to\n    :meth:`~ncclient.transport.SSHSession.load_known_hosts` and then\n    all the provided arguments are passed directly to its implementation\n    of :meth:`~ncclient.transport.SSHSession.connect`.\n\n    To customize the :class:`Manager`, add a `manager_params` dictionary in connection\n    parameters (e.g. `manager_params={'timeout': 60}` for a bigger RPC timeout parameter)\n\n    To invoke advanced vendor related operation add\n    `device_params={'name': '<vendor_alias>'}` in connection parameters. For the time,\n    'junos' and 'nexus' are supported for Juniper and Cisco Nexus respectively.\n\n    A custom device handler can be provided with\n    `device_params={'handler':<handler class>}` in connection parameters.\n    \"\"\"\n    # Extract device parameter and manager parameter dictionaries, if they were passed into this function.\n    # Remove them from kwds (which should keep only session.connect() parameters).\n    device_params = _extract_device_params(kwds)\n    manager_params = _extract_manager_params(kwds)\n\n    device_handler = make_device_handler(device_params)\n    device_handler.add_additional_ssh_connect_params(kwds)\n    session = transport.SSHSession(device_handler)\n    if \"hostkey_verify\" not in kwds or kwds[\"hostkey_verify\"]:\n        session.load_known_hosts()\n\n    try:\n       session.connect(*args, **kwds)\n    except Exception as ex:\n        if session.transport:\n            session.close()\n        raise\n    return Manager(session, device_handler, **manager_params)\n\n\ndef connect_ioproc(*args, **kwds):\n    device_params = _extract_device_params(kwds)\n    manager_params = _extract_manager_params(kwds)\n\n    if device_params:\n        import_string = 'ncclient.transport.third_party.'\n        import_string += device_params['name'] + '.ioproc'\n        third_party_import = __import__(import_string, fromlist=['IOProc'])",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 344,
  "is_truncated": true
}

Generated tokens 101 tokens · stopped: STOP

Wait, why is it failing? Ah, I might have a typo in my tool call or the tool is broken. No, it looks like I'm using it as specified. Wait, I just realized I might be hitting a limit or something. Let me try to read the file in one go if it's not too large. It's 344 lines. <channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/manager.py<|"|>}<tool_call|><|tool_response>

Turn 13at 198 s143 tokens out10,860 prompt tokens

Still truncated. I'll use `start_line` and `end_line` but carefully. I suspect the previous error was my fault or some weirdness.

Wait, I see what happened in the previous failed call:
`.../archive?path=%2Fworkspace%2Fncclient%2Fmanager.py%60%2Cstart_line%3A151`
It seems it's interpreting the arguments as part of the path.

Let me try:

TOOL CALL · read_file

{
  "end_line": 344,
  "filepath": "ncclient/manager.py",
  "start_line": 151
}

Result of read_file 5,137 characters

{
  "status": "ok",
  "filepath": "ncclient/manager.py",
  "content": "\n    device_handler = make_device_handler(device_params)\n\n    session = third_party_import.IOProc(device_handler)\n    session.connect()\n\n    return Manager(session, device_handler, **manager_params)\n\n\ndef connect(*args, **kwds):\n    if \"host\" in kwds:\n        host = kwds[\"host\"]\n        device_params = kwds.get('device_params', {})\n        if host == 'localhost' and device_params.get('name') == 'junos' \\\n                and device_params.get('local'):\n            return connect_ioproc(*args, **kwds)\n        else:\n            return connect_ssh(*args, **kwds)\n\n\nclass Manager(object):\n\n    \"\"\"\n    For details on the expected behavior of the operations and their\n        parameters refer to :rfc:`6241`.\n\n    Manager instances are also context managers so you can use it like this::\n\n        with manager.connect(\"host\") as m:\n            # do your stuff\n\n    ... or like this::\n\n        m = manager.connect(\"host\")\n        try:\n            # do your stuff\n        finally:\n            m.close_session()\n    \"\"\"\n\n   # __metaclass__ = OpExecutor\n\n\n    HUGE_TREE_DEFAULT = False\n    \"\"\"Default for `huge_tree` support for XML parsing of RPC replies (defaults to False)\"\"\"\n\n    def __init__(self, session, device_handler, timeout=30):\n        self._session = session\n        self._async_mode = False\n        self._timeout = timeout\n        self._raise_mode = operations.RaiseMode.ALL\n        self._huge_tree = self.HUGE_TREE_DEFAULT\n        self._device_handler = device_handler\n        self._vendor_operations = {}\n        if device_handler:\n            self._vendor_operations.update(device_handler.add_additional_operations())\n\n    def __enter__(self):\n        return self\n\n    def __exit__(self, *args):\n        self.close_session()\n        return False\n\n    def __set_timeout(self, timeout):\n        self._timeout = timeout\n\n    def __set_async_mode(self, mode):\n        self._async_mode = mode\n\n    def __set_raise_mode(self, mode):\n        assert(mode in (operations.RaiseMode.NONE, operations.RaiseMode.ERRORS, operations.RaiseMode.ALL))\n        self._raise_mode = mode\n\n    def execute(self, cls, *args, **kwds):\n        return cls(self._session,\n                   device_handler=self._device_handler,\n                   async_mode=self._async_mode,\n                   timeout=self._timeout,\n                   raise_mode=self._raise_mode,\n                   huge_tree=self._huge_tree).request(*args, **kwds)\n\n    def locked(self, target):\n        \"\"\"Returns a context manager for a lock on a datastore, where\n        *target* is the name of the configuration datastore to lock, e.g.::\n\n            with m.locked(\"running\"):\n                # do your stuff\n\n        ... instead of::\n\n            m.lock(\"running\")\n            try:\n                # do your stuff\n            finally:\n                m.unlock(\"running\")\n        \"\"\"\n        return operations.LockContext(self._session, self._device_handler, target)\n\n    def scp(self):\n        return self._session.scp()\n\n    def session(self):\n        raise NotImplementedError\n\n    def __getattr__(self, method):\n        if method in self._vendor_operations:\n            return functools.partial(self.execute, self._vendor_operations[method])\n        elif method in OPERATIONS:\n            return functools.partial(self.execute, OPERATIONS[method])\n        else:\n            \"\"\"Parse args/kwargs correctly in order to build XML element\"\"\"\n            def _missing(*args, **kwargs):\n                m = method.replace('_', '-')\n                root = new_ele(m)\n                if args:\n                    for arg in args:\n                        sub_ele(root, arg)\n                r = self.rpc(root)\n                return r\n            return _missing\n\n    def take_notification(self, block=True, timeout=None):\n        \"\"\"Attempt to retrieve one notification from the queue of received\n        notifications.\n\n        If block is True, the call will wait until a notification is\n        received.\n\n        If timeout is a number greater than 0, the call will wait that\n        many seconds to receive a notification before timing out.\n\n        If there is no notification available when block is False or\n        when the timeout has elapse, None will be returned.\n\n        Otherwise a :class:`~ncclient.operations.notify.Notification`\n        object will be returned.\n        \"\"\"\n        return self._session.take_notification(block, timeout)\n\n    @property\n    def client_capabilities(self):\n        \"\"\":class:`~ncclient.capabilities.Capabilities` object representing\n        the client's capabilities.\"\"\"\n        return self._session._client_capabilities\n\n    @property\n    def server_capabilities(self):\n        \"\"\":class:`~ncclient.capabilities.Capabilities` object representing\n        the server's capabilities.\"\"\"",
  "start_line": 151,
  "end_line": 300,
  "total_lines": 344,
  "is_truncated": true
}

Generated tokens 143 tokens · stopped: STOP

Still truncated. I'll use `start_line` and `end_line` but carefully. I suspect the previous error was my fault or some weirdness. Wait, I see what happened in the previous failed call: `.../archive?path=%2Fworkspace%2Fncclient%2Fmanager.py%60%2Cstart_line%3A151` It seems it's interpreting the arguments as part of the path. Let me try: <channel|><|tool_call>call:read_file{end_line:344,filepath:<|"|>ncclient/manager.py<|"|>,start_line:151}<tool_call|><|tool_response>

Turn 14at 212 s263 tokens out12,419 prompt tokens

Okay, in `Manager`, we have:

```python
    def __getattr__(self, method):
        if method in self._vendor_operations:
            return functools.partial(self.execute, self._vendor_operations[method])
        elif method in OPERATIONS:
            return functools.partial(self.execute, OPERATIONS[method])
```

And `OPERATIONS` include `get`:
`"get": operations.Get,`

So `m.get(...)` calls `self.execute(operations.Get, ...)`.

```python
    def execute(self, cls, *args, **kwds):
        return cls(self._session,
                   device_handler=self._device_handler,
                   async_mode=self._async_mode,
                   timeout=self._timeout,
                   raise_mode=self._raise_mode,
                   huge_tree=self._huge_tree).request(*args, **kwds)
```

Now let's look at `ncclient/operations/retrieve.py` to see how `Get.request` works.

TOOL CALL · read_file

{
  "filepath": "ncclient/operations/retrieve.py"
}

Result of read_file 4,841 characters

{
  "status": "ok",
  "filepath": "ncclient/operations/retrieve.py",
  "content": "# Copyright 2009 Shikhar Bhushan\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n#    http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\nfrom ncclient.operations.errors import OperationError\nfrom ncclient.operations.rpc import RPC, RPCReply\n\nfrom ncclient.xml_ import *\nfrom lxml import etree\n\nfrom ncclient.operations import util\n\n\nclass WithDefaultsError(OperationError):\n\n    \"\"\"Invalid 'with-defaults' mode or capability URI\"\"\"\n\n\nclass GetReply(RPCReply):\n\n    \"\"\"Adds attributes for the *data* element to `RPCReply`.\"\"\"\n\n    def _parsing_hook(self, root):\n        self._data = None\n        if not self._errors:\n            self._data = root.find(qualify(\"data\"))\n\n    @property\n    def data_ele(self):\n        \"*data* element as an :class:`~xml.etree.ElementTree.Element`\"\n        if not self._parsed:\n            self.parse()\n        return self._data\n\n    @property\n    def data_xml(self):\n        \"*data* element as an XML string\"\n        if not self._parsed:\n            self.parse()\n        return to_xml(self._data)\n\n    data = data_ele\n    \"Same as :attr:`data_ele`\"\n\n\nclass GetSchemaReply(GetReply):\n    \"\"\"Reply for GetSchema called with specific parsing hook.\"\"\"\n\n    def _parsing_hook(self, root):\n        self._data = None\n        if not self._errors:\n            self._data = root.find(qualify(\"data\", NETCONF_MONITORING_NS)).text\n\n\nclass Get(RPC):\n\n    \"The *get* RPC.\"\n\n    REPLY_CLS = GetReply\n    \"See :class:`GetReply`.\"\n\n    def request(self, filter=None, with_defaults=None):\n        \"\"\"Retrieve running configuration and device state information.\n\n        *filter* specifies the portion of the configuration to retrieve (by default entire configuration is retrieved)\n\n        *with_defaults* defines an explicit method of retrieving default values from the configuration (see :rfc:`6243`)\n\n        :seealso: :ref:`filter_params`\n        \"\"\"\n        node = new_ele(\"get\")\n        if filter is not None:\n            node.append(util.build_filter(filter))\n        if with_defaults is not None:\n            self._assert(\":with-defaults\")\n            _append_with_defaults_mode(\n                node,\n                with_defaults,\n                self._session.server_capabilities,\n            )\n        return self._request(node)\n\n\ndef _append_with_defaults_mode(node, mode, capabilities):\n    _validate_with_defaults_mode(mode, capabilities)\n    with_defaults_element = sub_ele_ns(\n        node,\n        \"with-defaults\",\n        NETCONF_WITH_DEFAULTS_NS,\n    )\n    with_defaults_element.text = mode\n\n\ndef _validate_with_defaults_mode(mode, capabilities):\n    valid_modes = _get_valid_with_defaults_modes(capabilities)\n    if mode.strip().lower() not in valid_modes:\n        raise WithDefaultsError(\n            \"Invalid 'with-defaults' mode '{provided}'; the server only \"\n            \"supports the following: {options}\".format(\n                provided=mode,\n                options=', '.join(valid_modes)\n            )\n        )\n\n\ndef _get_valid_with_defaults_modes(capabilities):\n    \"\"\"Reference: https://tools.ietf.org/html/rfc6243#section-4.3\"\"\"\n    capability = capabilities[\":with-defaults\"]\n\n    try:\n        valid_modes = [capability.parameters[\"basic-mode\"]]\n    except KeyError:\n        raise WithDefaultsError(\n            \"Invalid 'with-defaults' capability URI advertised by the server; \"\n            \"missing 'basic-mode' parameter\"\n        )\n\n    try:\n        also_supported = capability.parameters[\"also-supported\"]\n    except KeyError:\n        return valid_modes\n\n    valid_modes.extend(also_supported.split(\",\"))\n\n    return valid_modes\n\n\nclass GetConfig(RPC):\n\n    \"\"\"The *get-config* RPC.\"\"\"\n\n    REPLY_CLS = GetReply\n    \"\"\"See :class:`GetReply`.\"\"\"\n\n    def request(self, source, filter=None, with_defaults=None):\n        \"\"\"Retrieve all or part of a specified configuration.\n\n        *source* name of the configuration datastore being queried\n\n        *filter* specifies the portion of the configuration to retrieve (by default entire configuration is retrieved)",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 239,
  "is_truncated": true
}

Generated tokens 263 tokens · stopped: STOP

Okay, in `Manager`, we have: ```python def __getattr__(self, method): if method in self._vendor_operations: return functools.partial(self.execute, self._vendor_operations[method]) elif method in OPERATIONS: return functools.partial(self.execute, OPERATIONS[method]) ``` And `OPERATIONS` include `get`: `"get": operations.Get,` So `m.get(...)` calls `self.execute(operations.Get, ...)`. ```python def execute(self, cls, *args, **kwds): return cls(self._session, device_handler=self._device_handler, async_mode=self._async_mode, timeout=self._timeout, raise_mode=self._raise_mode, huge_tree=self._huge_tree).request(*args, **kwds) ``` Now let's look at `ncclient/operations/retrieve.py` to see how `Get.request` works. <channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/retrieve.py<|"|>}<tool_call|><|tool_response>

Turn 15at 285 s1,439 tokens out14,079 prompt tokens

In `Get.request`:
```python
    def request(self, filter=None, with_defaults=None):
        ...
        node = new_ele("get")
        if filter is not None:
            node.append(util.build_filter(filter))
```

If the user calls `m.get('xpath', '/a/b/c')`, then `filter` is `'xpath'`, and `with_defaults` is `'/a/b/c'`.
Wait, `m.get` is a partial of `execute`.
`m.get('xpath', '/a/b/c')` becomes `execute(Get, 'xpath', '/a/b/c')`.
`execute` calls `Get(...).request('xpath', '/a/b/c')`.
So `filter='xpath'` and `with_defaults='/a/b/c'`.
This is probably NOT what the user intended.

Wait, let's look at the problem statement:
`reply = m.get('xpath', path)`
Actually, the user says:
"The following code used to work in 0.6.7 and earlier"
```python
from ncclient import manager

path = '/a/b/c'

with manager.connect(...) as m:
    reply = m.get('xpath', path)
```

If `m.get('xpath', path)` is called, then `Get.request` is called with `filter='xpath'` and `with_defaults='/a/b/c'`.
Then `util.build_filter('xpath')` is called.
In `util.build_filter`:
```python
def build_filter(spec, capcheck=None):
    type = None
    if isinstance(spec, tuple):
        ...
    elif isinstance(spec, list):
        ...
    else:
        rep = validated_element(spec, ...)
```
If `spec` is `'xpath'`, it goes to `else` and calls `validated_element('xpath', ...)`.

But the traceback said:
```
  File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request
    node.append(util.build_filter(filter))
  File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter
    ns, select = criteria
ValueError: too many values to unpack (expected 2)
```

Wait, if line 53 is `ns, select = criteria`, then `type == "xpath"` must have been true.
And `type, criteria = spec` must have been executed.
So `spec` MUST have been a tuple.

Wait, if the user called `m.get('xpath', path)`, then `filter` is `'xpath'`.
The only way `spec` is a tuple is if they called `m.get(filter=('xpath', path))`.

Look at the traceback provided in the issue:
`File "test-netconf.py", line 7, in <module>`
`reply = m.get(filter=('xpath', path))`

Ah! The user said "The following code used to work in 0.6.7" but then showed a traceback where they call `m.get(filter=('xpath', path))`.

Wait, the problem statement says:
"The following code used to work in 0.6.7 and earlier,
```
from ncclient import manager
path = '/a/b/c'
with manager.connect(...) as m:
    reply = m.get('xpath', path)
```
Now this code throws an error
```
  File "test-netconf.py", line 7, in <module>
    reply = m.get(filter=('xpath', path))
```"

Wait, the code they say used to work is `m.get('xpath', path)`, but the code that throws an error is `m.get(filter=('xpath', path))`. These are different calls!

If they call `m.get('xpath', path)`, then `filter='xpath'` and `with_defaults=path`.
If they call `m.get(filter=('xpath', path))`, then `filter=('xpath', path)` and `with_defaults=None`.

The latter is what leads to the `ValueError`.

And the user says: "The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple."

So they mean that when you pass `('xpath', path)`, `path` should be allowed to be a string.

Let's verify my hypothesis that `('xpath', path)` where `path` is a string fails. I already did that, and it failed.

Now, if I change `build_filter` to handle `criteria` as a string:

```python
        if type == "xpath":
            if isinstance(criteria, tuple):
                ns, select = criteria
            else:
                ns, select = None, criteria
            rep = new_ele_nsmap("filter", ns, type=type)
            rep.attrib["select"] = select
```

Wait, if `ns` is `None`, will `new_ele_nsmap` work?
`new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)`
It calls `qualify(tag)` as the first argument to `etree.Element`.
Actually, `etree.Element(tag, attrib={}, nsmap={})`.
So `nsmap` can be `None`.

Let's test this fix.

TOOL CALL · edit_file

{
  "filepath": "ncclient/operations/util.py",
  "new_string": "        if type == \"xpath\":\n            if isinstance(criteria, tuple):\n                ns, select = criteria\n            else:\n                ns, select = None, criteria\n            rep = new_ele_nsmap(\"filter\", ns, type=type)\n            rep.attrib[\"select\"] = select",
  "old_string": "        if type == \"xpath\":\n            ns, select = criteria\n            rep = new_ele_nsmap(\"filter\", ns, type=type)\n            rep.attrib[\"select\"] = select"
}

Result of edit_file 652 characters

{
  "status": "ok",
  "filepath": "ncclient/operations/util.py",
  "occurrences": 1,
  "strategy": "exact",
  "diff": "--- a/ncclient/operations/util.py\n+++ b/ncclient/operations/util.py\n@@ -50,7 +50,10 @@\n     if isinstance(spec, tuple):\n         type, criteria = spec\n         if type == \"xpath\":\n-            ns, select = criteria\n+            if isinstance(criteria, tuple):\n+                ns, select = criteria\n+            else:\n+                ns, select = None, criteria\n             rep = new_ele_nsmap(\"filter\", ns, type=type)\n             rep.attrib[\"select\"] = select\n         elif type == \"subtree\":\n",
  "is_truncated": false
}

Generated tokens 1,439 tokens · stopped: STOP

In `Get.request`: ```python def request(self, filter=None, with_defaults=None): ... node = new_ele("get") if filter is not None: node.append(util.build_filter(filter)) ``` If the user calls `m.get('xpath', '/a/b/c')`, then `filter` is `'xpath'`, and `with_defaults` is `'/a/b/c'`. Wait, `m.get` is a partial of `execute`. `m.get('xpath', '/a/b/c')` becomes `execute(Get, 'xpath', '/a/b/c')`. `execute` calls `Get(...).request('xpath', '/a/b/c')`. So `filter='xpath'` and `with_defaults='/a/b/c'`. This is probably NOT what the user intended. Wait, let's look at the problem statement: `reply = m.get('xpath', path)` Actually, the user says: "The following code used to work in 0.6.7 and earlier" ```python from ncclient import manager path = '/a/b/c' with manager.connect(...) as m: reply = m.get('xpath', path) ``` If `m.get('xpath', path)` is called, then `Get.request` is called with `filter='xpath'` and `with_defaults='/a/b/c'`. Then `util.build_filter('xpath')` is called. In `util.build_filter`: ```python def build_filter(spec, capcheck=None): type = None if isinstance(spec, tuple): ... elif isinstance(spec, list): ... else: rep = validated_element(spec, ...) ``` If `spec` is `'xpath'`, it goes to `else` and calls `validated_element('xpath', ...)`. But the traceback said: ``` File "/usr/local/lib/python3.8/site-packages/ncclient/operations/retrieve.py", line 83, in request node.append(util.build_filter(filter)) File "/usr/local/lib/python3.8/site-packages/ncclient/operations/util.py", line 53, in build_filter ns, select = criteria ValueError: too many values to unpack (expected 2) ``` Wait, if line 53 is `ns, select = criteria`, then `type == "xpath"` must have been true. And `type, criteria = spec` must have been executed. So `spec` MUST have been a tuple. Wait, if the user called `m.get('xpath', path)`, then `filter` is `'xpath'`. The only way `spec` is a tuple is if they called `m.get(filter=('xpath', path))`. Look at the traceback provided in the issue: `File "test-netconf.py", line 7, in <module>` `reply = m.get(filter=('xpath', path))` Ah! The user said "The following code used to work in 0.6.7" but then showed a traceback where they call `m.get(filter=('xpath', path))`. Wait, the problem statement says: "The following code used to work in 0.6.7 and earlier, ``` from ncclient import manager path = '/a/b/c' with manager.connect(...) as m: reply = m.get('xpath', path) ``` Now this code throws an error ``` File "test-netconf.py", line 7, in <module> reply = m.get(filter=('xpath', path)) ```" Wait, the code they say used to work is `m.get('xpath', path)`, but the code that throws an error is `m.get(filter=('xpath', path))`. These are different calls! If they call `m.get('xpath', path)`, then `filter='xpath'` and `with_defaults=path`. If they call `m.get(filter=('xpath', path))`, then `filter=('xpath', path)` and `with_defaults=None`. The latter is what leads to the `ValueError`. And the user says: "The path parameter in 0.6.7 used to be a string, even the current document still so specifies. But in the unit test and the code the path is expected as a tuple." So they mean that when you pass `('xpath', path)`, `path` should be allowed to be a string. Let's verify my hypothesis that `('xpath', path)` where `path` is a string fails. I already did that, and it failed. Now, if I change `build_filter` to handle `criteria` as a string: ```python if type == "xpath": if isinstance(criteria, tuple): ns, select = criteria else: ns, select = None, criteria rep = new_ele_nsmap("filter", ns, type=type) rep.attrib["select"] = select ``` Wait, if `ns` is `None`, will `new_ele_nsmap` work? `new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), attrs, nsmap, **extra)` It calls `qualify(tag)` as the first argument to `etree.Element`. Actually, `etree.Element(tag, attrib={}, nsmap={})`. So `nsmap` can be `None`. Let's test this fix. <channel|><|tool_call>call:edit_file{filepath:<|"|>ncclient/operations/util.py<|"|>,new_string:<|"|> if type == "xpath": if isinstance(criteria, tuple): ns, select = criteria else: ns, select = None, criteria rep = new_ele_nsmap("filter", ns, type=type) rep.attrib["select"] = select<|"|>,old_string:<|"|> if type == "xpath": ns, select = criteria rep = new_ele_nsmap("filter", ns, type=type) rep.attrib["select"] = select<|"|>}<tool_call|><|tool_response>

Turn 16at 293 s174 tokens out15,729 prompt tokens

Now let's verify it with both string and tuple.

TOOL CALL · run_command

{
  "command": "python3 - <<'PY'\nfrom ncclient.operations import util\ntry:\n    # Test string path\n    spec_str = ('xpath', '/a/b/c')\n    util.build_filter(spec_str)\n    print(\"Success with string path\")\n    \n    # Test tuple path\n    spec_tuple = ('xpath', ({'ns': 'uri'}, '/a/b/c'))\n    util.build_filter(spec_tuple)\n    print(\"Success with tuple path\")\nexcept Exception as e:\n    print(f\"Failure: {e}\")\n    import traceback\n    traceback.print_exc()\nPY\n"
}

Result of run_command 445 characters

{
  "status": "ok",
  "stdout": "Success with string path\nSuccess with tuple path\n",
  "stderr": "/opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n  from cryptography.hazmat.backends import default_backend\n",
  "exit_code": 0
}

Generated tokens 174 tokens · stopped: STOP

Now let's verify it with both string and tuple. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' from ncclient.operations import util try: # Test string path spec_str = ('xpath', '/a/b/c') util.build_filter(spec_str) print("Success with string path") # Test tuple path spec_tuple = ('xpath', ({'ns': 'uri'}, '/a/b/c')) util.build_filter(spec_tuple) print("Success with tuple path") except Exception as e: print(f"Failure: {e}") import traceback traceback.print_exc() PY <|"|>}<tool_call|><|tool_response>

Turn 17at 352 s248 tokens out5,916 prompt tokens

Wait, I should check `ncclient/operations/util.py` again to see if there are other places where `criteria` is unpacked.
In `build_filter`:

```python
        elif type == "subtree":
            rep = new_ele_nsmap("filter", None, type=type)
            for item in criteria:
                rep.append(build_filter(item))
```

Here `criteria` is iterated over, so it should be a list/tuple. If it was a string, `for item in criteria` would iterate over characters, which is probably not what is intended for `subtree`. But the issue specifically mentioned `xpath`.

The `xpath` filter is what the user was using.

Now let's check if there are other operations that use `build_filter`.
`Get` uses it.
`GetConfig` likely uses it.

Let's check `ncclient/operations/retrieve.py` for `GetConfig`.

TOOL CALL · read_file

{
  "end_line": 239,
  "filepath": "ncclient/operations/retrieve.py",
  "start_line": 150
}

Result of read_file 3,394 characters

{
  "status": "ok",
  "filepath": "ncclient/operations/retrieve.py",
  "content": "        *filter* specifies the portion of the configuration to retrieve (by default entire configuration is retrieved)\n\n        *with_defaults* defines an explicit method of retrieving default values from the configuration (see :rfc:`6243`)\n\n        :seealso: :ref:`filter_params`\"\"\"\n        node = new_ele(\"get-config\")\n        node.append(util.datastore_or_url(\"source\", source, self._assert))\n        if filter is not None:\n            node.append(util.build_filter(filter))\n        if with_defaults is not None:\n            self._assert(\":with-defaults\")\n            _append_with_defaults_mode(\n                node,\n                with_defaults,\n                self._session.server_capabilities,\n            )\n        return self._request(node)\n\nclass GetSchema(RPC):\n\n    \"\"\"The *get-schema* RPC.\"\"\"\n\n    REPLY_CLS = GetSchemaReply\n    \"\"\"See :class:`GetReply`.\"\"\"\n\n    def request(self, identifier, version=None, format=None):\n        \"\"\"Retrieve a named schema, with optional revision and type.\n\n        *identifier* name of the schema to be retrieved\n\n        *version* version of schema to get\n\n        *format* format of the schema to be retrieved, yang is the default\n\n        :seealso: :ref:`filter_params`\"\"\"\n        node = etree.Element(qualify(\"get-schema\",NETCONF_MONITORING_NS))\n        if identifier is not None:\n            elem = etree.Element(qualify(\"identifier\",NETCONF_MONITORING_NS))\n            elem.text = identifier\n            node.append(elem)\n        if version is not None:\n            elem = etree.Element(qualify(\"version\",NETCONF_MONITORING_NS))\n            elem.text = version\n            node.append(elem)\n        if format is not None:\n            elem = etree.Element(qualify(\"format\",NETCONF_MONITORING_NS))\n            elem.text = format\n            node.append(elem)\n        return self._request(node)\n\nclass Dispatch(RPC):\n\n    \"\"\"Generic retrieving wrapper\"\"\"\n\n    REPLY_CLS = GetReply\n    \"\"\"See :class:`GetReply`.\"\"\"\n\n    def request(self, rpc_command, source=None, filter=None):\n        \"\"\"\n        *rpc_command* specifies rpc command to be dispatched either in plain text or in xml element format (depending on command)\n\n        *source* name of the configuration datastore being queried\n\n        *filter* specifies the portion of the configuration to retrieve (by default entire configuration is retrieved)\n\n        :seealso: :ref:`filter_params`\n\n        Examples of usage::\n\n            dispatch('clear-arp-table')\n\n        or dispatch element like ::\n\n            xsd_fetch = new_ele('get-xnm-information')\n            sub_ele(xsd_fetch, 'type').text=\"xml-schema\"\n            sub_ele(xsd_fetch, 'namespace').text=\"junos-configuration\"\n            dispatch(xsd_fetch)\n        \"\"\"\n\n\n        if etree.iselement(rpc_command):\n            node = rpc_command\n        else:\n            node = new_ele(rpc_command)\n        if source is not None:\n            node.append(util.datastore_or_url(\"source\", source, self._assert))\n        if filter is not None:\n            node.append(util.build_filter(filter))\n\n        return self._request(node)",
  "start_line": 150,
  "end_line": 239,
  "total_lines": 239,
  "is_truncated": false
}

Generated tokens 248 tokens · stopped: STOP

Wait, I should check `ncclient/operations/util.py` again to see if there are other places where `criteria` is unpacked. In `build_filter`: ```python elif type == "subtree": rep = new_ele_nsmap("filter", None, type=type) for item in criteria: rep.append(build_filter(item)) ``` Here `criteria` is iterated over, so it should be a list/tuple. If it was a string, `for item in criteria` would iterate over characters, which is probably not what is intended for `subtree`. But the issue specifically mentioned `xpath`. The `xpath` filter is what the user was using. Now let's check if there are other operations that use `build_filter`. `Get` uses it. `GetConfig` likely uses it. Let's check `ncclient/operations/retrieve.py` for `GetConfig`.<channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/retrieve.py<|"|>,start_line:150,end_line:239}<tool_call|><|tool_response>

Turn 18at 360 s101 tokens out7,137 prompt tokens

`GetConfig.request` and `Dispatch.request` also use `util.build_filter(filter)`. Since I modified the shared `build_filter` method, these should now also support `( 'xpath', path )` where `path` is a string.

Let's double check if there are any other places that use `build_filter`.

TOOL CALL · run_command

{
  "command": "grep -rn \"build_filter\" ."
}

Result of run_command 2,105 characters

{
  "status": "ok",
  "stdout": "./ncclient/operations/retrieve.py:83:            node.append(util.build_filter(filter))\n./ncclient/operations/retrieve.py:158:            node.append(util.build_filter(filter))\n./ncclient/operations/retrieve.py:237:            node.append(util.build_filter(filter))\n./ncclient/operations/subscribe.py:52:            node.append(util.build_filter(filter))\n./ncclient/operations/util.py:48:def build_filter(spec, capcheck=None):\n./ncclient/operations/third_party/h3c/rpc.py:23:            node.append(util.build_filter(filter))\n./ncclient/operations/third_party/h3c/rpc.py:41:            node.append(util.build_filter(filter))\n./ncclient/operations/third_party/alu/rpc.py:37:                node.append(util.build_filter(('subtree', filter)))\n./test/unit/operations/test_retrieve.py:30:        node.append(util.build_filter(root_filter))\n./test/unit/operations/test_retrieve.py:199:        node.append(util.build_filter(root_filter))\n./test/unit/operations/test_retrieve.py:218:        node.append(util.build_filter(root_filter))\n./test/unit/operations/test_retrieve.py:256:        node.append(util.build_filter(multi_subtree_filters))\n./test/unit/operations/test_utils.py:55:    def test_build_filter(self):\n./test/unit/operations/test_utils.py:56:        reply = build_filter(xml)\n./test/unit/operations/test_utils.py:60:    def test_build_filter_2(self):\n./test/unit/operations/test_utils.py:65:        reply = build_filter(filter)\n./test/unit/operations/test_utils.py:71:    def test_build_filter_3(self):\n./test/unit/operations/test_utils.py:78:        reply = build_filter(filter, capcheck=\"cap\")\n./test/unit/operations/test_utils.py:84:    def test_build_filter_4(self):\n./test/unit/operations/test_utils.py:92:            build_filter, filter, capcheck=\"cap\")\n",
  "stderr": "grep: ./ncclient/operations/__pycache__/subscribe.cpython-37.pyc: binary file matches\ngrep: ./ncclient/operations/__pycache__/util.cpython-37.pyc: binary file matches\ngrep: ./ncclient/operations/__pycache__/retrieve.cpython-37.pyc: binary file matches\n",
  "exit_code": 0
}

Generated tokens 101 tokens · stopped: STOP

`GetConfig.request` and `Dispatch.request` also use `util.build_filter(filter)`. Since I modified the shared `build_filter` method, these should now also support `( 'xpath', path )` where `path` is a string. Let's double check if there are any other places that use `build_filter`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "build_filter" .<|"|>}<tool_call|><|tool_response>

Turn 19at 366 s69 tokens out7,960 prompt tokens

It seems I have covered all calls to `build_filter`.

Now let's run the tests to make sure I didn't break anything.

TOOL CALL · run_command

{
  "command": "pytest tests/unit/operations/test_utils.py -q --tb=short --no-header"
}

Result of run_command 462 characters

{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "ERROR: file or directory not found: tests/unit/operations/test_utils.py\n\n",
  "details": {
    "stdout": "============================= test session starts ==============================\ncollected 0 items\n\n============================ no tests ran in 0.00s =============================\n",
    "stderr": "ERROR: file or directory not found: tests/unit/operations/test_utils.py\n\n",
    "exit_code": 4
  }
}

Generated tokens 69 tokens · stopped: STOP

It seems I have covered all calls to `build_filter`. Now let's run the tests to make sure I didn't break anything. <channel|><|tool_call>call:run_command{command:<|"|>pytest tests/unit/operations/test_utils.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>

Turn 20at 372 s100 tokens out8,168 prompt tokens

Wait, where are the tests? Let me check the directory layout again.
Wait, I used `grep -rn "build_filter" .` and it found `./test/unit/operations/test_utils.py`.
Ah, the directory is `test/`, not `tests/`.

TOOL CALL · run_command

{
  "command": "pytest test/unit/operations/test_utils.py -q --tb=short --no-header"
}

Result of run_command 1,004 characters

{
  "status": "ok",
  "stdout": "============================= test session starts ==============================\ncollected 10 items\n\ntest/unit/operations/test_utils.py ..........                            [100%]\n\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32\n  /opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n    from cryptography.hazmat.backends import default_backend\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n======================== 10 passed, 1 warning in 0.05s =========================\n",
  "stderr": "",
  "exit_code": 0,
  "budget_warning": "Only 10 tool call(s) remaining (20/30 used). Finalize your edits and call submit_patch soon."
}

Generated tokens 100 tokens · stopped: STOP

Wait, where are the tests? Let me check the directory layout again. Wait, I used `grep -rn "build_filter" .` and it found `./test/unit/operations/test_utils.py`. Ah, the directory is `test/`, not `tests/`. <channel|><|tool_call>call:run_command{command:<|"|>pytest test/unit/operations/test_utils.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>

Turn 21at 374 s48 tokens out8,559 prompt tokens

Now let's run the other retrieve tests.

TOOL CALL · run_command

{
  "command": "pytest test/unit/operations/test_retrieve.py -q --tb=short --no-header"
}

Result of run_command 1,249 characters

{
  "status": "ok",
  "stdout": "============================= test session starts ==============================\ncollected 12 items\n\ntest/unit/operations/test_retrieve.py ............                       [100%]\n\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32\n  /opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.\n    from cryptography.hazmat.backends import default_backend\n\ntest/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported\n  /workspace/test/unit/operations/test_retrieve.py:99: DeprecationWarning: Please use assertRaisesRegex instead.\n    with_defaults='report-all-tagged'\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n======================== 12 passed, 2 warnings in 0.06s ========================\n",
  "stderr": "",
  "exit_code": 0,
  "budget_warning": "Only 9 tool call(s) remaining (21/30 used). Finalize your edits and call submit_patch soon."
}

Generated tokens 48 tokens · stopped: STOP

Now let's run the other retrieve tests. <channel|><|tool_call>call:run_command{command:<|"|>pytest test/unit/operations/test_retrieve.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>

Turn 22at 389 s294 tokens out8,971 prompt tokens

All tests are passing. I have fixed the regression where passing a string instead of a tuple for the xpath path in `build_filter` caused a `ValueError`.

One last check: the user mentioned `m.get('xpath', path)`.
If they call `m.get('xpath', path)`, then `filter='xpath'` and `with_defaults=path`.
My fix only helps if they call `m.get(filter=('xpath', path))`.

Wait, if they call `m.get('xpath', path)`, does that even work in 0.6.7?
In 0.6.7, `Get.request(filter=None, with_defaults=None)` was called.
If they called `m.get('xpath', path)`, it called `execute(Get, 'xpath', path)`, which called `Get().request('xpath', path)`.
Then `filter='xpath'` and `with_defaults=path`.
Then `build_filter('xpath')` was called.
In 0.6.7, `build_filter('xpath')` would call `validated_element('xpath', ...)`.

Wait, what does `validated_element` do?

TOOL CALL · read_file

{
  "end_line": 47,
  "filepath": "ncclient/operations/util.py",
  "start_line": 1
}

Result of read_file 1,952 characters

{
  "status": "ok",
  "filepath": "ncclient/operations/util.py",
  "content": "# Copyright 2009 Shikhar Bhushan\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n#    http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\n'Boilerplate ugliness'\n\nfrom ncclient.xml_ import *\n\nfrom ncclient.operations.errors import OperationError, MissingCapabilityError\n\ndef one_of(*args):\n    \"Verifies that only one of the arguments is not None\"\n    for i, arg in enumerate(args):\n        if arg is not None:\n            for argh in args[i+1:]:\n                if argh is not None:\n                    raise OperationError(\"Too many parameters\")\n            else:\n                return\n    raise OperationError(\"Insufficient parameters\")\n\ndef datastore_or_url(wha, loc, capcheck=None):\n    node = new_ele(wha)\n    if \"://\" in loc: # e.g. http://, file://, ftp://\n        if capcheck is not None:\n            capcheck(\":url\") # url schema check at some point!\n            sub_ele(node, \"url\").text = loc\n    else:\n        #if loc == 'candidate':\n        #    capcheck(':candidate')\n        #elif loc == 'startup':\n        #    capcheck(':startup')\n        #elif loc == 'running' and wha == 'target':\n        #    capcheck(':writable-running')\n        sub_ele(node, loc)\n    return node\n",
  "start_line": 1,
  "end_line": 47,
  "total_lines": 84,
  "is_truncated": false,
  "budget_warning": "Only 8 tool call(s) remaining (22/30 used). Finalize your edits and call submit_patch soon."
}

Generated tokens 294 tokens · stopped: STOP

All tests are passing. I have fixed the regression where passing a string instead of a tuple for the xpath path in `build_filter` caused a `ValueError`. One last check: the user mentioned `m.get('xpath', path)`. If they call `m.get('xpath', path)`, then `filter='xpath'` and `with_defaults=path`. My fix only helps if they call `m.get(filter=('xpath', path))`. Wait, if they call `m.get('xpath', path)`, does that even work in 0.6.7? In 0.6.7, `Get.request(filter=None, with_defaults=None)` was called. If they called `m.get('xpath', path)`, it called `execute(Get, 'xpath', path)`, which called `Get().request('xpath', path)`. Then `filter='xpath'` and `with_defaults=path`. Then `build_filter('xpath')` was called. In 0.6.7, `build_filter('xpath')` would call `validated_element('xpath', ...)`. Wait, what does `validated_element` do? <channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:1,end_line:47}<tool_call|><|tool_response>

Turn 23at 394 s67 tokens out9,844 prompt tokens

Wait, I don't see `validated_element` in the first 47 lines. Let me read the rest of `ncclient/operations/util.py`.

TOOL CALL · read_file

{
  "filepath": "ncclient/operations/util.py",
  "start_line": 48
}

Result of read_file 1,875 characters

{
  "status": "ok",
  "filepath": "ncclient/operations/util.py",
  "content": "def build_filter(spec, capcheck=None):\n    type = None\n    if isinstance(spec, tuple):\n        type, criteria = spec\n        if type == \"xpath\":\n            if isinstance(criteria, tuple):\n                ns, select = criteria\n            else:\n                ns, select = None, criteria\n            rep = new_ele_nsmap(\"filter\", ns, type=type)\n            rep.attrib[\"select\"] = select\n        elif type == \"subtree\":\n            rep = new_ele(\"filter\", type=type)\n            rep.append(to_ele(criteria))\n        else:\n            raise OperationError(\"Invalid filter type\")\n    elif isinstance(spec, list):\n        rep = new_ele(\"filter\", type=\"subtree\")\n        for cri in spec:\n            rep.append(to_ele(cri))\n    else:\n\n        rep = validated_element(spec, (\"filter\", qualify(\"filter\"),\n                                       qualify(\"filter\", ns=NETCONF_NOTIFICATION_NS)))\n        # results in XMLError: line 105 ncclient/xml_.py - commented by earies - 5/10/13\n        #rep = validated_element(spec, (\"filter\", qualify(\"filter\")),\n        #                                attrs=(\"type\",))\n        # TODO set type var here, check if select attr present in case of xpath..\n    if type == \"xpath\" and capcheck is not None:\n        capcheck(\":xpath\")\n    return rep\n\ndef validate_args(arg_name, value, args_list):\n    # this is a common method, which used to check whether a value is in args_list\n    if value not in args_list:\n        raise OperationError('Invalid value \"%s\" in \"%s\" element' % (value, arg_name))\n    return True",
  "start_line": 48,
  "end_line": 84,
  "total_lines": 84,
  "is_truncated": false,
  "budget_warning": "Only 7 tool call(s) remaining (23/30 used). Finalize your edits and call submit_patch soon."
}

Generated tokens 67 tokens · stopped: STOP

Wait, I don't see `validated_element` in the first 47 lines. Let me read the rest of `ncclient/operations/util.py`. <channel|><|tool_call>call:read_file{filepath:<|"|>ncclient/operations/util.py<|"|>,start_line:48}<tool_call|><|tool_response>

Turn 24at 447 s949 tokens out10,458 prompt tokens

The function `validated_element` is not defined in `util.py`. It must be imported from `ncclient.xml_`.

Wait, let's look at the `else` block again:
```python
    else:
        rep = validated_element(spec, ("filter", qualify("filter"),
                                       qualify("filter", ns=NETCONF_NOTIFICATION_NS)))
```

If `spec` is `'xpath'`, it calls `validated_element('xpath', ...)`.

The user said:
"The following code used to work in 0.6.7 and earlier
```
from ncclient import manager
path = '/a/b/c'
with manager.connect(...) as m:
    reply = m.get('xpath', path)
```"

In this case, `filter` is `'xpath'`.
Then `build_filter('xpath')` is called.
`spec` is `'xpath'`, so it goes to the `else` block.
It calls `validated_element('xpath', ...)`.

Wait, but then `path` (which is passed as `with_defaults`) is completely ignored!
`Get.request` implementation:
```python
    def request(self, filter=None, with_defaults=None):
        node = new_ele("get")
        if filter is not None:
            node.append(util.build_filter(filter))
        if with_defaults is not None:
            ...
```
If `filter='xpath'` and `with_defaults='/a/b/c'`, then `util.build_filter('xpath')` is called, and then `_append_with_defaults_mode(node, '/a/b/c', ...)` is called.

`_append_with_defaults_mode` checks if `/a/b/c` is a valid `with-defaults` mode (e.g., `basic-mode`). It is NOT. So it would raise `WithDefaultsError`.

So `m.get('xpath', path)` cannot possibly have worked to perform an xpath get if `xpath` was passed as the first argument.

The user MUST have meant `m.get(filter=('xpath', path))`.
And the traceback they provided confirms this:
`reply = m.get(filter=('xpath', path))`

So my fix to `build_filter` is exactly what is needed.

Let's verify one more thing. If `spec` is a tuple and `type == "subtree"`, then `criteria` is expected to be a list of things to build into the subtree.
```python
        elif type == "subtree":
            rep = new_ele("filter", type=type)
            rep.append(to_ele(criteria))
```
Wait, the code I read says:
```python
        elif type == "subtree":
            rep = new_ele("filter", type=type)
            rep.append(to_ele(criteria))
```
Wait, in the `read_file` output it was:
```python
        elif type == "subtree":
            rep = new_ele("filter", type=type)
            rep.append(to_ele(criteria))
```
Wait, no, look at the `read_file` output again.

```python
        elif type == "subtree":
            rep = new_ele("filter", type=type)
            rep.append(to_ele(criteria))
```
Actually, let me look at the actual code in the first `read_file` of `util.py`.

```python
        elif type == "subtree":
            rep = new_ele("filter", type=type)
            rep.append(to_ele(criteria))
```
Hmm, the `to_ele` call is there.

Wait, if `type == "subtree"`, `criteria` is passed to `to_ele`. If `criteria` is a list, `to_ele` might handle it? Let's check `ncclient/xml_.py` if needed, but for now, let's assume `subtree` is not the issue here.

The issue is specifically about `xpath`.

I'm confident with the fix.

Final check of the diff.

TOOL CALL · run_command

{
  "command": "git diff"
}

Result of run_command 834 characters

{
  "status": "ok",
  "stdout": "diff --git a/ncclient/operations/util.py b/ncclient/operations/util.py\nindex 0d1bb38..46dd4aa 100755\n--- a/ncclient/operations/util.py\n+++ b/ncclient/operations/util.py\n@@ -50,7 +50,10 @@ def build_filter(spec, capcheck=None):\n     if isinstance(spec, tuple):\n         type, criteria = spec\n         if type == \"xpath\":\n-            ns, select = criteria\n+            if isinstance(criteria, tuple):\n+                ns, select = criteria\n+            else:\n+                ns, select = None, criteria\n             rep = new_ele_nsmap(\"filter\", ns, type=type)\n             rep.attrib[\"select\"] = select\n         elif type == \"subtree\":\n",
  "stderr": "",
  "exit_code": 0,
  "budget_warning": "Only 6 tool call(s) remaining (24/30 used). Finalize your edits and call submit_patch soon."
}

Generated tokens 949 tokens · stopped: STOP

The function `validated_element` is not defined in `util.py`. It must be imported from `ncclient.xml_`. Wait, let's look at the `else` block again: ```python else: rep = validated_element(spec, ("filter", qualify("filter"), qualify("filter", ns=NETCONF_NOTIFICATION_NS))) ``` If `spec` is `'xpath'`, it calls `validated_element('xpath', ...)`. The user said: "The following code used to work in 0.6.7 and earlier ``` from ncclient import manager path = '/a/b/c' with manager.connect(...) as m: reply = m.get('xpath', path) ```" In this case, `filter` is `'xpath'`. Then `build_filter('xpath')` is called. `spec` is `'xpath'`, so it goes to the `else` block. It calls `validated_element('xpath', ...)`. Wait, but then `path` (which is passed as `with_defaults`) is completely ignored! `Get.request` implementation: ```python def request(self, filter=None, with_defaults=None): node = new_ele("get") if filter is not None: node.append(util.build_filter(filter)) if with_defaults is not None: ... ``` If `filter='xpath'` and `with_defaults='/a/b/c'`, then `util.build_filter('xpath')` is called, and then `_append_with_defaults_mode(node, '/a/b/c', ...)` is called. `_append_with_defaults_mode` checks if `/a/b/c` is a valid `with-defaults` mode (e.g., `basic-mode`). It is NOT. So it would raise `WithDefaultsError`. So `m.get('xpath', path)` cannot possibly have worked to perform an xpath get if `xpath` was passed as the first argument. The user MUST have meant `m.get(filter=('xpath', path))`. And the traceback they provided confirms this: `reply = m.get(filter=('xpath', path))` So my fix to `build_filter` is exactly what is needed. Let's verify one more thing. If `spec` is a tuple and `type == "subtree"`, then `criteria` is expected to be a list of things to build into the subtree. ```python elif type == "subtree": rep = new_ele("filter", type=type) rep.append(to_ele(criteria)) ``` Wait, the code I read says: ```python elif type == "subtree": rep = new_ele("filter", type=type) rep.append(to_ele(criteria)) ``` Wait, in the `read_file` output it was: ```python elif type == "subtree": rep = new_ele("filter", type=type) rep.append(to_ele(criteria)) ``` Wait, no, look at the `read_file` output again. ```python elif type == "subtree": rep = new_ele("filter", type=type) rep.append(to_ele(criteria)) ``` Actually, let me look at the actual code in the first `read_file` of `util.py`. ```python elif type == "subtree": rep = new_ele("filter", type=type) rep.append(to_ele(criteria)) ``` Hmm, the `to_ele` call is there. Wait, if `type == "subtree"`, `criteria` is passed to `to_ele`. If `criteria` is a list, `to_ele` might handle it? Let's check `ncclient/xml_.py` if needed, but for now, let's assume `subtree` is not the issue here. The issue is specifically about `xpath`. I'm confident with the fix. Final check of the diff. <channel|><|tool_call>call:run_command{command:<|"|>git diff<|"|>}<tool_call|><|tool_response>

Patch, tests and logs

Final code change Included

diff --git a/ncclient/operations/util.py b/ncclient/operations/util.py
index 0d1bb38..46dd4aa 100755
--- a/ncclient/operations/util.py
+++ b/ncclient/operations/util.py
@@ -50,7 +50,10 @@ def build_filter(spec, capcheck=None):
     if isinstance(spec, tuple):
         type, criteria = spec
         if type == "xpath":
-            ns, select = criteria
+            if isinstance(criteria, tuple):
+                ns, select = criteria
+            else:
+                ns, select = None, criteria
             rep = new_ele_nsmap("filter", ns, type=type)
             rep.attrib["select"] = select
         elif type == "subtree":

Test output Included

============================= test session starts ==============================
collecting ... collected 182 items

test/unit/test_manager.py::TestManager::test_connect_exception PASSED    [  0%]
test/unit/test_manager.py::TestManager::test_connect_ioproc PASSED       [  1%]
test/unit/test_manager.py::TestManager::test_connect_outbound_ssh PASSED [  1%]
test/unit/test_manager.py::TestManager::test_connect_ssh PASSED          [  2%]
test/unit/test_manager.py::TestManager::test_connect_ssh1 PASSED         [  2%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ecdsa PASSED [  3%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ed25519 PASSED [  3%]
test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_rsa PASSED [  4%]
test/unit/test_manager.py::TestManager::test_connect_with_ssh_config PASSED [  4%]
test/unit/test_manager.py::TestManager::test_ioproc PASSED               [  5%]
test/unit/test_manager.py::TestManager::test_make_device_handler PASSED  [  6%]
test/unit/test_manager.py::TestManager::test_make_device_handler_provided_handler PASSED [  6%]
test/unit/test_manager.py::TestManager::test_manager_channel_id PASSED   [  7%]
test/unit/test_manager.py::TestManager::test_manager_channel_name PASSED [  7%]
test/unit/test_manager.py::TestManager::test_manager_channel_session_id PASSED [  8%]
test/unit/test_manager.py::TestManager::test_manager_client_capability PASSED [  8%]
test/unit/test_manager.py::TestManager::test_manager_connected PASSED    [  9%]
test/unit/test_manager.py::TestManager::test_manager_getattr PASSED      [  9%]
test/unit/test_manager.py::TestManager::test_manager_getattr2 PASSED     [ 10%]
test/unit/test_manager.py::TestManager::test_manager_huge_node PASSED    [ 10%]
test/unit/test_manager.py::TestManager::test_manager_locked PASSED       [ 11%]
test/unit/test_manager.py::TestManager::test_manager_server_capability PASSED [ 12%]
test/unit/test_manager.py::TestManager::test_manager_take_notification PASSED [ 12%]
test/unit/test_manager.py::TestManager::test_outbound_manager_connected PASSED [ 13%]
test/unit/test_manager.py::TestManager::test_ssh PASSED                  [ 13%]
test/unit/test_manager.py::TestManager::test_ssh2 PASSED                 [ 14%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_001 PASSED  [ 14%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_002 PASSED  [ 15%]
test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_003 PASSED  [ 15%]
test/unit/test_xml_.py::TestXML::test_ncelement_find PASSED              [ 16%]
test/unit/test_xml_.py::TestXML::test_ncelement_findtext PASSED          [ 17%]
test/unit/test_xml_.py::TestXML::test_ncelement_remove_namespace PASSED  [ 17%]
test/unit/test_xml_.py::TestXML::test_ncelement_reply_001 PASSED         [ 18%]
test/unit/test_xml_.py::TestXML::test_parse_root PASSED                  [ 18%]
test/unit/test_xml_.py::TestXML::test_sub_ele_inherit_parent_namespace PASSED [ 19%]
test/unit/test_xml_.py::TestXML::test_to_ele PASSED                      [ 19%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail PASSED      [ 20%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail_2 PASSED    [ 20%]
test/unit/test_xml_.py::TestXML::test_validated_element_fail_3 PASSED    [ 21%]
test/unit/test_xml_.py::TestXML::test_validated_element_pass PASSED      [ 21%]
test/unit/devices/test_default.py::TestDefaultDevice::test_get_capabilties PASSED [ 22%]
test/unit/devices/test_default.py::TestDefaultDevice::test_get_ssh_subsystem_names PASSED [ 23%]
test/unit/devices/test_default.py::TestDefaultDevice::test_handle_connection_exceptions PASSED [ 23%]
test/unit/devices/test_default.py::TestDefaultDevice::test_handle_raw_dispatch PASSED [ 24%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_1 PASSED [ 24%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_2 PASSED [ 25%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_3 PASSED [ 25%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_4 PASSED [ 26%]
test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_5 PASSED [ 26%]
test/unit/devices/test_default.py::TestDefaultDevice::test_perform_qualify_check PASSED [ 27%]
test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_device_labels PASSED [ 28%]
test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_devices PASSED [ 28%]
test/unit/devices/test_junos.py::TestJunosDevice::test_additional_operations PASSED [ 29%]
test/unit/devices/test_junos.py::TestJunosDevice::test_handle_connection_exceptions PASSED [ 29%]
test/unit/devices/test_junos.py::TestJunosDevice::test_perform_quality_check PASSED [ 30%]
test/unit/devices/test_junos.py::TestJunosDevice::test_transform_reply PASSED [ 30%]
test/unit/operations/test_edit.py::TestEdit::test_cancel_commit PASSED   [ 31%]
test/unit/operations/test_edit.py::TestEdit::test_commit PASSED          [ 31%]
test/unit/operations/test_edit.py::TestEdit::test_commit_exception PASSED [ 32%]
test/unit/operations/test_edit.py::TestEdit::test_copy_config PASSED     [ 32%]
test/unit/operations/test_edit.py::TestEdit::test_copy_config_2 PASSED   [ 33%]
test/unit/operations/test_edit.py::TestEdit::test_delete_config PASSED   [ 34%]
test/unit/operations/test_edit.py::TestEdit::test_discard_changes PASSED [ 34%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config PASSED     [ 35%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_2 PASSED   [ 35%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_invalid_arguments_exception PASSED [ 36%]
test/unit/operations/test_edit.py::TestEdit::test_edit_config_validate_capability_exception PASSED [ 36%]
test/unit/operations/test_edit.py::TestEdit::test_validate_config PASSED [ 37%]
test/unit/operations/test_edit.py::TestEdit::test_validate_datastore PASSED [ 37%]
test/unit/operations/test_lock.py::TestLock::test_lock PASSED            [ 38%]
test/unit/operations/test_lock.py::TestLock::test_lock_context_enter PASSED [ 39%]
test/unit/operations/test_lock.py::TestLock::test_lock_context_exit PASSED [ 39%]
test/unit/operations/test_lock.py::TestLock::test_lock_default_param PASSED [ 40%]
test/unit/operations/test_lock.py::TestLock::test_unlock PASSED          [ 40%]
test/unit/operations/test_lock.py::TestLock::test_unlock_default_param PASSED [ 41%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch PASSED [ 41%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch_2 PASSED [ 42%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get PASSED     [ 42%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config PASSED [ 43%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults PASSED [ 43%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults_missing_capability PASSED [ 44%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_schema PASSED [ 45%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_also_supported PASSED [ 45%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_basic_mode PASSED [ 46%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_missing_capability PASSED [ 46%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported PASSED [ 47%]
test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_multi_subtree_filters PASSED [ 47%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_async PASSED         [ 48%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_capability_error PASSED [ 48%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_exception PASSED [ 49%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_workaround PASSED [ 50%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply PASSED         [ 50%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_exception PASSED [ 51%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_workaround PASSED [ 51%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror PASSED      [ 52%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_multiple_errors PASSED [ 52%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_tag_to_attr PASSED [ 53%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_send PASSED          [ 53%]
test/unit/operations/test_rpc.py::TestRPC::test_rpc_timeout_error PASSED [ 54%]
test/unit/operations/test_session.py::TestSession::test_close_session PASSED [ 54%]
test/unit/operations/test_session.py::TestSession::test_kill_session PASSED [ 55%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_all PASSED [ 56%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_stream PASSED [ 56%]
test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_times PASSED [ 57%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter PASSED  [ 57%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_other PASSED [ 58%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_subtree PASSED [ 58%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath PASSED [ 59%]
test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath_ns PASSED [ 59%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url PASSED [ 60%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url_2 PASSED [ 60%]
test/unit/operations/test_utils.py::TestUtils::test_datastore_url_3 PASSED [ 61%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_1 PASSED      [ 62%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_2 PASSED      [ 62%]
test/unit/operations/test_utils.py::TestUtils::test_one_of_3 PASSED      [ 63%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_command PASSED [ 63%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit PASSED [ 64%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_at_time PASSED [ 64%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed PASSED [ 65%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed_at_time PASSED [ 65%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_compare_conf PASSED [ 66%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc PASSED [ 67%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc_str PASSED [ 67%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf PASSED [ 68%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf_text_sets_huge_tree PASSED [ 68%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_halt PASSED [ 69%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_json PASSED [ 69%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_list PASSED [ 70%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_set PASSED [ 70%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_text PASSED [ 71%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_xml PASSED [ 71%]
test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_reboot PASSED [ 72%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_multiple_rpc_reply PASSED [ 73%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_rpc_reply PASSED [ 73%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_splited_rpc_reply PASSED [ 74%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on PASSED [ 74%]
test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on_junos_rfc_compliant PASSED [ 75%]
test/unit/transport/test_parser.py::TestSession::test_use_filter_False PASSED [ 75%]
test/unit/transport/test_parser.py::TestSession::test_use_filter_xml_without_sax_input PASSED [ 76%]
test/unit/transport/test_session.py::TestSession::test_add_listener PASSED [ 76%]
test/unit/transport/test_session.py::TestSession::test_add_listener_exception PASSED [ 77%]
test/unit/transport/test_session.py::TestSession::test_client_capability PASSED [ 78%]
test/unit/transport/test_session.py::TestSession::test_connected PASSED  [ 78%]
test/unit/transport/test_session.py::TestSession::test_dispatch_error PASSED [ 79%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message PASSED [ 79%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message_error PASSED [ 80%]
test/unit/transport/test_session.py::TestSession::test_dispatch_message_error2 PASSED [ 80%]
test/unit/transport/test_session.py::TestSession::test_get_listener_instance PASSED [ 81%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_build PASSED [ 81%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_error PASSED [ 82%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_ok PASSED [ 82%]
test/unit/transport/test_session.py::TestSession::test_hello_handler_parse PASSED [ 83%]
test/unit/transport/test_session.py::TestSession::test_id PASSED         [ 84%]
test/unit/transport/test_session.py::TestSession::test_notification_handler_non_notification PASSED [ 84%]
test/unit/transport/test_session.py::TestSession::test_notification_handler_valid_notification PASSED [ 85%]
test/unit/transport/test_session.py::TestSession::test_post_connect PASSED [ 85%]
test/unit/transport/test_session.py::TestSession::test_post_connect2 PASSED [ 86%]
test/unit/transport/test_session.py::TestSession::test_remove_listener PASSED [ 86%]
test/unit/transport/test_session.py::TestSession::test_send_connected PASSED [ 87%]
test/unit/transport/test_session.py::TestSession::test_send_disconnected PASSED [ 87%]
test/unit/transport/test_session.py::TestSession::test_server_capability PASSED [ 88%]
test/unit/transport/test_session.py::TestSession::test_take_notification PASSED [ 89%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_agent PASSED         [ 89%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_agent_exception PASSED [ 90%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles PASSED [ 90%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles_exception PASSED [ 91%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_exception PASSED     [ 91%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles PASSED      [ 92%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles_exception PASSED [ 92%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_no_methods_exception PASSED [ 93%]
test/unit/transport/test_ssh.py::TestSSH::test_auth_password PASSED      [ 93%]
test/unit/transport/test_ssh.py::TestSSH::test_close PASSED              [ 94%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key PASSED      [ 95%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_2 PASSED    [ 95%]
test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_IOError PASSED [ 96%]
test/unit/transport/test_ssh.py::TestSSH::test_parse PASSED              [ 96%]
test/unit/transport/test_ssh.py::TestSSH::test_parse11 PASSED            [ 97%]
test/unit/transport/test_ssh.py::TestSSH::test_parse_incomplete_delimiter PASSED [ 97%]
test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py2 SKIPPED   [ 98%]
test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py3 PASSED    [ 98%]
test/unit/transport/test_ssh.py::TestSSH::test_run_send_py2 SKIPPED      [ 99%]
test/unit/transport/test_ssh.py::TestSSH::test_run_send_py3 PASSED       [100%]

=============================== warnings summary ===============================
../opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32
  /opt/py37/lib/python3.7/site-packages/paramiko/transport.py:32: CryptographyDeprecationWarning: Python 3.7 is no longer supported by the Python core team and support for it is deprecated in cryptography. The next release of cryptography will remove support for Python 3.7.
    from cryptography.hazmat.backends import default_backend

-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
==================================== PASSES ====================================
___________ TestSession.test_filter_xml_delimiter_multiple_rpc_reply ___________
------------------------------ Captured log call -------------------------------
WARNING  ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: </rpc-reply>]]>
WARNING  ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]><rpc-reply>
_______________ TestSession.test_filter_xml_delimiter_rpc_reply ________________
------------------------------ Captured log call -------------------------------
WARNING  ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: </rpc-reply>]]>
WARNING  ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]>
WARNING  ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: lts></rpc-reply>]]>
___________ TestSession.test_filter_xml_delimiter_splited_rpc_reply ____________
------------------------------ Captured log call -------------------------------
WARNING  ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: -reply>]]>
WARNING  ncclient.transport.third_party.junos.parser:parser.py:85 Check for rpc reply end tag within data received: esults></rpc-reply>]]>
WARNING  ncclient.transport.third_party.junos.parser:parser.py:90 Check if end delimiter is split within data received: ]]><rpc-reply>
____________ TestSession.test_filter_xml_sax_on_junos_rfc_compliant ____________
----------------------------- Captured stdout call -----------------------------
<Element multi-routing-engine-results at 0x7134095279b0>
___________________ TestSession.test_dispatch_message_error2 ___________________
------------------------------ Captured log call -------------------------------
WARNING  ncclient.transport.session:session.py:89 [session 0x7134098be590] error dispatching to <ncclient.transport.session.HelloHandler object at 0x71340985d110>: Exception()
- generated xml file: /tmp/rebench-grade-37ccc27b9eb741009df14f174f36c18a.xml --
=========================== short test summary info ============================
PASSED test/unit/test_manager.py::TestManager::test_connect_exception
PASSED test/unit/test_manager.py::TestManager::test_connect_ioproc
PASSED test/unit/test_manager.py::TestManager::test_connect_outbound_ssh
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh1
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ecdsa
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_ed25519
PASSED test/unit/test_manager.py::TestManager::test_connect_ssh_with_hostkey_rsa
PASSED test/unit/test_manager.py::TestManager::test_connect_with_ssh_config
PASSED test/unit/test_manager.py::TestManager::test_ioproc
PASSED test/unit/test_manager.py::TestManager::test_make_device_handler
PASSED test/unit/test_manager.py::TestManager::test_make_device_handler_provided_handler
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_id
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_name
PASSED test/unit/test_manager.py::TestManager::test_manager_channel_session_id
PASSED test/unit/test_manager.py::TestManager::test_manager_client_capability
PASSED test/unit/test_manager.py::TestManager::test_manager_connected
PASSED test/unit/test_manager.py::TestManager::test_manager_getattr
PASSED test/unit/test_manager.py::TestManager::test_manager_getattr2
PASSED test/unit/test_manager.py::TestManager::test_manager_huge_node
PASSED test/unit/test_manager.py::TestManager::test_manager_locked
PASSED test/unit/test_manager.py::TestManager::test_manager_server_capability
PASSED test/unit/test_manager.py::TestManager::test_manager_take_notification
PASSED test/unit/test_manager.py::TestManager::test_outbound_manager_connected
PASSED test/unit/test_manager.py::TestManager::test_ssh
PASSED test/unit/test_manager.py::TestManager::test_ssh2
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_001
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_002
PASSED test/unit/test_xml_.py::Test_NCElement::test_ncelement_reply_003
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_find
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_findtext
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_remove_namespace
PASSED test/unit/test_xml_.py::TestXML::test_ncelement_reply_001
PASSED test/unit/test_xml_.py::TestXML::test_parse_root
PASSED test/unit/test_xml_.py::TestXML::test_sub_ele_inherit_parent_namespace
PASSED test/unit/test_xml_.py::TestXML::test_to_ele
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail_2
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_fail_3
PASSED test/unit/test_xml_.py::TestXML::test_validated_element_pass
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_get_capabilties
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_get_ssh_subsystem_names
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_handle_connection_exceptions
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_handle_raw_dispatch
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_1
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_2
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_3
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_4
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_is_rpc_error_exempt_5
PASSED test/unit/devices/test_default.py::TestDefaultDevice::test_perform_qualify_check
PASSED test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_device_labels
PASSED test/unit/devices/test_get_supported_devices.py::TestGetSupportedDevices::test_get_supported_devices
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_additional_operations
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_handle_connection_exceptions
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_perform_quality_check
PASSED test/unit/devices/test_junos.py::TestJunosDevice::test_transform_reply
PASSED test/unit/operations/test_edit.py::TestEdit::test_cancel_commit
PASSED test/unit/operations/test_edit.py::TestEdit::test_commit
PASSED test/unit/operations/test_edit.py::TestEdit::test_commit_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_copy_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_copy_config_2
PASSED test/unit/operations/test_edit.py::TestEdit::test_delete_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_discard_changes
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_2
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_invalid_arguments_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_edit_config_validate_capability_exception
PASSED test/unit/operations/test_edit.py::TestEdit::test_validate_config
PASSED test/unit/operations/test_edit.py::TestEdit::test_validate_datastore
PASSED test/unit/operations/test_lock.py::TestLock::test_lock
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_context_enter
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_context_exit
PASSED test/unit/operations/test_lock.py::TestLock::test_lock_default_param
PASSED test/unit/operations/test_lock.py::TestLock::test_unlock
PASSED test/unit/operations/test_lock.py::TestLock::test_unlock_default_param
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_dispatch_2
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_config_with_defaults_missing_capability
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_schema
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_also_supported
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_basic_mode
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_missing_capability
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_defaults_not_supported
PASSED test/unit/operations/test_retrieve.py::TestRetrieve::test_get_with_multi_subtree_filters
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_async
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_capability_error
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_exception
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_huge_text_node_workaround
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_exception
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_reply_huge_text_node_workaround
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_multiple_errors
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_rpcerror_tag_to_attr
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_send
PASSED test/unit/operations/test_rpc.py::TestRPC::test_rpc_timeout_error
PASSED test/unit/operations/test_session.py::TestSession::test_close_session
PASSED test/unit/operations/test_session.py::TestSession::test_kill_session
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_all
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_stream
PASSED test/unit/operations/test_subscribe.py::TestSubscribe::test_subscribe_times
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_other
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_subtree
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath
PASSED test/unit/operations/test_utils.py::TestUtils::test_build_filter_xpath_ns
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url_2
PASSED test/unit/operations/test_utils.py::TestUtils::test_datastore_url_3
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_1
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_2
PASSED test/unit/operations/test_utils.py::TestUtils::test_one_of_3
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_command
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_at_time
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_commit_confirmed_at_time
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_compare_conf
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_execute_rpc_str
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_getconf_text_sets_huge_tree
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_halt
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_json
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_list
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_set
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_text
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_loadconf_xml
PASSED test/unit/operations/third_party/juniper/test_rpc.py::TestRPC::test_reboot
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_multiple_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_delimiter_splited_rpc_reply
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on
PASSED test/unit/transport/test_parser.py::TestSession::test_filter_xml_sax_on_junos_rfc_compliant
PASSED test/unit/transport/test_parser.py::TestSession::test_use_filter_False
PASSED test/unit/transport/test_parser.py::TestSession::test_use_filter_xml_without_sax_input
PASSED test/unit/transport/test_session.py::TestSession::test_add_listener
PASSED test/unit/transport/test_session.py::TestSession::test_add_listener_exception
PASSED test/unit/transport/test_session.py::TestSession::test_client_capability
PASSED test/unit/transport/test_session.py::TestSession::test_connected
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_error
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message_error
PASSED test/unit/transport/test_session.py::TestSession::test_dispatch_message_error2
PASSED test/unit/transport/test_session.py::TestSession::test_get_listener_instance
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_build
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_error
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_callback_ok
PASSED test/unit/transport/test_session.py::TestSession::test_hello_handler_parse
PASSED test/unit/transport/test_session.py::TestSession::test_id
PASSED test/unit/transport/test_session.py::TestSession::test_notification_handler_non_notification
PASSED test/unit/transport/test_session.py::TestSession::test_notification_handler_valid_notification
PASSED test/unit/transport/test_session.py::TestSession::test_post_connect
PASSED test/unit/transport/test_session.py::TestSession::test_post_connect2
PASSED test/unit/transport/test_session.py::TestSession::test_remove_listener
PASSED test/unit/transport/test_session.py::TestSession::test_send_connected
PASSED test/unit/transport/test_session.py::TestSession::test_send_disconnected
PASSED test/unit/transport/test_session.py::TestSession::test_server_capability
PASSED test/unit/transport/test_session.py::TestSession::test_take_notification
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_agent
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_agent_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_default_keyfiles_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_keyfiles_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_no_methods_exception
PASSED test/unit/transport/test_ssh.py::TestSSH::test_auth_password
PASSED test/unit/transport/test_ssh.py::TestSSH::test_close
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_2
PASSED test/unit/transport/test_ssh.py::TestSSH::test_load_host_key_IOError
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse11
PASSED test/unit/transport/test_ssh.py::TestSSH::test_parse_incomplete_delimiter
PASSED test/unit/transport/test_ssh.py::TestSSH::test_run_receive_py3
PASSED test/unit/transport/test_ssh.py::TestSSH::test_run_send_py3
SKIPPED [1] test/unit/transport/test_ssh.py:318: test not supported >= Python3
SKIPPED [1] test/unit/transport/test_ssh.py:335: test currently non-functional
================== 180 passed, 2 skipped, 1 warning in 0.52s ===================

Test errors Included

Test report (JUnit) Included

<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite errors="0" failures="0" hostname="33f2ec7228fc" name="pytest" skipped="2" tests="182" time="0.513" timestamp="2026-11-14T03:49:19.572716"><testcase classname="test.unit.test_manager.TestManager" name="test_connect_exception" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ioproc" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_outbound_ssh" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh1" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_ecdsa" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_ed25519" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_ssh_with_hostkey_rsa" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_connect_with_ssh_config" time="0.003" /><testcase classname="test.unit.test_manager.TestManager" name="test_ioproc" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_make_device_handler" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_make_device_handler_provided_handler" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_id" time="0.003" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_name" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_channel_session_id" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_client_capability" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_connected" time="0.017" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_getattr" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_getattr2" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_huge_node" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_locked" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_server_capability" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_manager_take_notification" time="0.000" /><testcase classname="test.unit.test_manager.TestManager" name="test_outbound_manager_connected" time="0.002" /><testcase classname="test.unit.test_manager.TestManager" name="test_ssh" time="0.001" /><testcase classname="test.unit.test_manager.TestManager" name="test_ssh2" time="0.002" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_001" time="0.001" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_002" time="0.000" /><testcase classname="test.unit.test_xml_.Test_NCElement" name="test_ncelement_reply_003" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_find" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_findtext" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_remove_namespace" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_ncelement_reply_001" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_parse_root" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_sub_ele_inherit_parent_namespace" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_to_ele" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail_2" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_fail_3" time="0.000" /><testcase classname="test.unit.test_xml_.TestXML" name="test_validated_element_pass" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_get_capabilties" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_get_ssh_subsystem_names" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_handle_connection_exceptions" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_handle_raw_dispatch" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_1" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_2" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_3" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_4" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_is_rpc_error_exempt_5" time="0.000" /><testcase classname="test.unit.devices.test_default.TestDefaultDevice" name="test_perform_qualify_check" time="0.000" /><testcase classname="test.unit.devices.test_get_supported_devices.TestGetSupportedDevices" name="test_get_supported_device_labels" time="0.000" /><testcase classname="test.unit.devices.test_get_supported_devices.TestGetSupportedDevices" name="test_get_supported_devices" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_additional_operations" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_handle_connection_exceptions" time="0.001" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_perform_quality_check" time="0.000" /><testcase classname="test.unit.devices.test_junos.TestJunosDevice" name="test_transform_reply" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_cancel_commit" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_commit" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_commit_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_copy_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_copy_config_2" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_delete_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_discard_changes" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_2" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_invalid_arguments_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_edit_config_validate_capability_exception" time="0.000" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_validate_config" time="0.001" /><testcase classname="test.unit.operations.test_edit.TestEdit" name="test_validate_datastore" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_context_enter" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_context_exit" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_lock_default_param" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_unlock" time="0.001" /><testcase classname="test.unit.operations.test_lock.TestLock" name="test_unlock_default_param" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_dispatch" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_dispatch_2" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config_with_defaults" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_config_with_defaults_missing_capability" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_schema" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_also_supported" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_basic_mode" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_missing_capability" time="0.000" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_defaults_not_supported" time="0.001" /><testcase classname="test.unit.operations.test_retrieve.TestRetrieve" name="test_get_with_multi_subtree_filters" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_async" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_capability_error" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_huge_text_node_exception" time="0.008" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_huge_text_node_workaround" time="0.066" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply_huge_text_node_exception" time="0.004" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_reply_huge_text_node_workaround" time="0.004" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror" time="0.002" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror_multiple_errors" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_rpcerror_tag_to_attr" time="0.000" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_send" time="0.001" /><testcase classname="test.unit.operations.test_rpc.TestRPC" name="test_rpc_timeout_error" time="0.001" /><testcase classname="test.unit.operations.test_session.TestSession" name="test_close_session" time="0.001" /><testcase classname="test.unit.operations.test_session.TestSession" name="test_kill_session" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_all" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_stream" time="0.001" /><testcase classname="test.unit.operations.test_subscribe.TestSubscribe" name="test_subscribe_times" time="0.001" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_other" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_subtree" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_xpath" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_build_filter_xpath_ns" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url_2" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_datastore_url_3" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_1" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_2" time="0.000" /><testcase classname="test.unit.operations.test_utils.TestUtils" name="test_one_of_3" time="0.000" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_command" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_at_time" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_confirmed" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_commit_confirmed_at_time" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_compare_conf" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_execute_rpc" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_execute_rpc_str" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_getconf" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_getconf_text_sets_huge_tree" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_halt" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_json" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_list" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_set" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_text" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_loadconf_xml" time="0.001" /><testcase classname="test.unit.operations.third_party.juniper.test_rpc.TestRPC" name="test_reboot" time="0.001" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_multiple_rpc_reply" time="0.006" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_rpc_reply" time="0.024" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_delimiter_splited_rpc_reply" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_sax_on" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_filter_xml_sax_on_junos_rfc_compliant" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_use_filter_False" time="0.005" /><testcase classname="test.unit.transport.test_parser.TestSession" name="test_use_filter_xml_without_sax_input" time="0.005" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_add_listener" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_add_listener_exception" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_client_capability" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_connected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_error" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message_error" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_dispatch_message_error2" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_get_listener_instance" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_build" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_callback_error" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_callback_ok" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_hello_handler_parse" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_id" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_notification_handler_non_notification" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_notification_handler_valid_notification" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_post_connect" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_post_connect2" time="0.001" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_remove_listener" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_send_connected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_send_disconnected" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_server_capability" time="0.000" /><testcase classname="test.unit.transport.test_session.TestSession" name="test_take_notification" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_agent" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_agent_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_default_keyfiles" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_default_keyfiles_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_keyfiles" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_keyfiles_exception" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_no_methods_exception" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_auth_password" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_close" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key_2" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_load_host_key_IOError" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse11" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_parse_incomplete_delimiter" time="0.000" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_receive_py2" time="0.000"><skipped message="test not supported &gt;= Python3" type="pytest.skip">/testbed/test/unit/transport/test_ssh.py:318: test not supported &gt;= Python3</skipped></testcase><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_receive_py3" time="0.001" /><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_send_py2" time="0.000"><skipped message="test currently non-functional" type="pytest.skip">/testbed/test/unit/transport/test_ssh.py:335: test currently non-functional</skipped></testcase><testcase classname="test.unit.transport.test_ssh.TestSSH" name="test_run_send_py3" time="0.001" /></testsuite></testsuites>

Agent log Included

  [   0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
  [   0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository ncclient/ncclient.
  [  29.6s] 💭 (1365 chars) "The user is reporting a breaking change in `ncclient` version 0.6.8 where `m.get('xpath', 
path)` now fails if `path` is ..."
  [  29.6s] 🔧 run_command grep -rn --include="*.py" "build_filter" ncclient/operations/ | grep "util.py"
  [  29.7s]   → ncclient/operations/util.py:48:def build_filter(spec, capcheck=None):
  [  32.9s] 💭 (47 chars) "Okay, let's read `ncclient/operations/util.py`."
  [  32.9s] 📖 read_file (ncclient/operations/util.py)
  [  33.0s]   ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': '        #    
capcheck(\':candidate\')\n        #…
  [  64.3s] 💭 (1431 chars) "Ah, I see the problem.
In `build_filter`:
```python
def build_filter(spec, capcheck=None):
    type = None
    if isinst..."
  [  64.3s] 🔧 run_command grep -rn "def new_ele_nsmap" ncclient/ | grep "util.py" || grep -rn "def new_ele
  [  64.3s]   → error (exit 0): 
  [  68.6s] 💭 (51 chars) "I'll just search for `new_ele_nsmap` in `ncclient`."
  [  68.6s] 🔧 run_command grep -rn "new_ele_nsmap" ncclient/
  [  68.7s]   → ncclient/xml_.py:231:new_ele_nsmap = lambda tag, nsmap, attrs={}, **extra: etree.Element(qualify(tag), 
attrs, nsmap, **e
  [ 105.2s] 💭 (935 chars) "It's a lambda in `ncclient/xml_.py`.

Now let's see what happens if `ns` is a string instead of a map?
`new_ele_nsmap = ..."
  [ 105.2s] 🔧 run_command (13 lines) python3 - <<'PY'
  [ 105.3s]   → Failure: too many values to unpack (expected 2)
  [ 112.1s] 💭 (77 chars) "Reproduction successful.

Now, if I pass a tuple as `criteria`, does it work?"
  [ 112.1s] 🔧 run_command (12 lines) python3 - <<'PY'
  [ 112.2s]   → Success with tuple
  [ 153.3s] 💭 (1827 chars) "Okay, so if `criteria` is a tuple, it works. If it's a string, it fails.

We want it to work with a string too. If it's ..."
  [ 153.3s] 🔧 run_command grep -rn "def get(" ncclient/manager.py
  [ 153.3s]   → error (exit 0): 
  [ 154.9s] 💭 (22 chars) "Maybe it's just `get`."
  [ 154.9s] 🔧 run_command grep -rn "def get" ncclient/manager.py
  [ 154.9s]   → error (exit 0): 
  [ 159.4s] 💭 (74 chars) "Wait, maybe it's a method of a class. Let's look at `ncclient/manager.py`."
  [ 159.4s] 📖 read_file (ncclient/manager.py)
  [ 159.5s]   ✓ {'status': 'ok', 'filepath': 'ncclient/manager.py', 'content': '# Copyright 2009 Shikhar Bhushan\n# 
Copyright 2011 Leoni…
  [ 164.0s] 💭 (80 chars) "I need to find the `Manager` class. I'll read the rest of `ncclient/manager.py`."
  [ 164.0s] 📖 read_file (ncclient/manager.py`,start_line:151)
  [ 164.0s]   ❌ {'status': 'error', 'error_type': 'FileReadError', 'error_message': '404 Client Error for 
http+docker://localhost/v1.52/…
  [ 176.0s] 💭 (417 chars) "Whoops, I forgot that `read_file` doesn't work like that if I don't specify `start_line` and
`end_line` correctly or if ..."
  [ 176.0s] 📖 read_file (ncclient/manager.py`,start_line:151)
  [ 176.0s]   ❌ {'status': 'error', 'error_type': 'FileReadError', 'error_message': '404 Client Error for 
http+docker://localhost/v1.52/…
  [ 186.7s] 💭 (273 chars) "Wait, why is it failing? Ah, I might have a typo in my tool call or the tool is broken. No, 
it looks like I'm using it a..."
  [ 186.7s] 📖 read_file (ncclient/manager.py)
  [ 186.8s]   ✓ {'status': 'ok', 'filepath': 'ncclient/manager.py', 'content': '# Copyright 2009 Shikhar Bhushan\n# 
Copyright 2011 Leoni…
  [ 197.9s] 💭 (338 chars) "Still truncated. I'll use `start_line` and `end_line` but carefully. I suspect the previous 
error was my fault or some w..."
  [ 197.9s] 📖 read_file (ncclient/manager.py)
  [ 197.9s]   ✓ {'status': 'ok', 'filepath': 'ncclient/manager.py', 'content': '\n    device_handler = 
make_device_handler(device_params…
  [ 211.9s] 💭 (872 chars) "Okay, in `Manager`, we have:

```python
    def __getattr__(self, method):
        if method in self._vendor_operations:..."
  [ 211.9s] 📖 read_file (ncclient/operations/retrieve.py)
  [ 212.0s]   ✓ {'status': 'ok', 'filepath': 'ncclient/operations/retrieve.py', 'content': '# Copyright 2009 Shikhar 
Bhushan\n#\n# Licen…
  [ 284.2s] 💭 (4120 chars) "In `Get.request`:
```python
    def request(self, filter=None, with_defaults=None):
        ...
        node = new_ele("..."
  [ 284.2s] ✏️ edit_file (ncclient/operations/util.py)
  [ 284.4s]   ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'occurrences': 1, 'strategy': 'exact', 
'diff': '--- a/ncclie…
  [ 292.8s] 💭 (47 chars) "Now let's verify it with both string and tuple."
  [ 292.8s] 🔧 run_command (17 lines) python3 - <<'PY'
  [ 292.9s]   → Success with string path
  [ 351.3s] 💭 (791 chars) "Wait, I should check `ncclient/operations/util.py` again to see if there are other places 
where `criteria` is unpacked.
..."
  [ 351.3s] 📖 read_file (ncclient/operations/retrieve.py)
  [ 351.3s]   ✓ {'status': 'ok', 'filepath': 'ncclient/operations/retrieve.py', 'content': '        *filter* specifies 
the portion of th…
  [ 359.4s] 💭 (282 chars) "`GetConfig.request` and `Dispatch.request` also use `util.build_filter(filter)`. Since I 
modified the shared `build_filt..."
  [ 359.4s] 🔧 run_command grep -rn "build_filter" .
  [ 359.4s]   → ./ncclient/operations/retrieve.py:83:            node.append(util.build_filter(filter))
  [ 365.6s] 💭 (115 chars) "It seems I have covered all calls to `build_filter`.

Now let's run the tests to make sure I didn't break anything."
  [ 365.6s] 🔧 run_command pytest tests/unit/operations/test_utils.py -q --tb=short --no-header
  [ 365.8s]   → error (exit 0): 
  [ 371.6s] 💭 (205 chars) "Wait, where are the tests? Let me check the directory layout again.
Wait, I used `grep -rn "build_filter" .` and it foun..."
  [ 371.6s] 🔧 run_command pytest test/unit/operations/test_utils.py -q --tb=short --no-header
  [ 371.8s]   → ============================= test session starts ==============================
  [ 373.6s] 💭 (39 chars) "Now let's run the other retrieve tests."
  [ 373.6s] 🔧 run_command pytest test/unit/operations/test_retrieve.py -q --tb=short --no-header
  [ 373.9s]   → ============================= test session starts ==============================
  [ 388.2s] 💭 (839 chars) "All tests are passing. I have fixed the regression where passing a string instead of a tuple
for the xpath path in `buil..."
  [ 388.2s] 📖 read_file (ncclient/operations/util.py)
  [ 388.2s]   ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': '# Copyright 2009 Shikhar 
Bhushan\n#\n# Licensed …
  [ 393.4s] 💭 (115 chars) "Wait, I don't see `validated_element` in the first 47 lines. Let me read the rest of 
`ncclient/operations/util.py`."
  [ 393.4s] 📖 read_file (ncclient/operations/util.py)
  [ 393.5s]   ✓ {'status': 'ok', 'filepath': 'ncclient/operations/util.py', 'content': 'def build_filter(spec, 
capcheck=None):\n    type…
  [ 447.0s] 💭 (3122 chars) "The function `validated_element` is not defined in `util.py`. It must be imported from 
`ncclient.xml_`.

Wait, let's loo..."
  [ 447.0s] 🔧 run_command git diff
  [ 447.1s]   → diff --git a/ncclient/operations/util.py b/ncclient/operations/util.py

Native result row

{
  "agent_error": "Agent exceeded session timeout (7.5 min)",
  "duration_seconds": 453.81,
  "error": "Agent exceeded session timeout (7.5 min)",
  "grade": {
    "collected_tests": 182,
    "competition_junit_ok": true,
    "error": null,
    "required_issues_count": 0,
    "resolved": true,
    "status_counts": {
      "PASSED": 180,
      "SKIPPED": 2
    },
    "strict_clean_patch": true,
    "test_exit_code": 0
  },
  "instance_id": "ncclient__ncclient-418",
  "pass_idx": 0,
  "patch_chars": 637,
  "phase1_seconds": 452.64,
  "repo": "ncclient/ncclient",
  "request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/ncclient__ncclient-418__p0__r2.jsonl",
  "resolved": true,
  "rollout_idx": 2,
  "run_key": "ncclient__ncclient-418__p0__r2",
  "strict_clean_patch": true,
  "tool_calls": 24,
  "total_llm_calls": 24,
  "trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_ncclient__ncclient-418__p0__r2.json"
}