GEMMA DEVELOPER AGENT
SAVED EVIDENCE
← 31B real rollouts · 480 (exact stack, 32 lanes, 13-Nov)
ROLLOUT 7 · celery/celery

celery__celery-9465

Solved
430 stotal time
18tool calls
21model calls
8,307tokens generated
199,337prompt tokens read

No error recorded

⚠ The request log has 20 model calls but the trace has 22 agent calls, so tokens are listed separately instead of beside each turn.

Turn by turn

Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.

System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`.
Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run.

## Critical Environment & Grader Rules
1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`.
2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files.
3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`.
4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks:
   `pytest path/to/test_file.py -k pattern -q --tb=short --no-header`
   If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off.
5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission.

## Execution Protocol

### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls)
- The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories.
- Run a single compound `run_command` with `grep -rn --include="*.py"` to locate:
  (a) the exact symbols, error strings, or functions from the problem description,
  (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and
  (c) the closest existing unit test files under `tests/`.

### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls)
- Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests.
- Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types.

### Phase 3 — Reproduce Bug in One Call (1 tool call)
- Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts.

### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls)
- Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`.
- Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests.
- **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`.

### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls)
- Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`.
- Run `git status --short && git diff` via `run_command`. Confirm:
  - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately),
  - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched),
  - Minimal, clean diff with valid imports and indentation.
- Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 8,012 characters
You are evaluating a software engineering task for repository celery/celery.

Problem Statement:
Config cassandra backend port config not work
## Checklist

- [ ] I have included the output of ``celery -A proj report`` in the issue.
      (if you are not able to do this, then at least specify the Celery
       version affected).
```
software -> celery:4.1.0 (latentcall) kombu:4.1.0 py:2.7.12
            billiard:3.5.0.3 py-amqp:2.2.2
platform -> system:Linux arch:64bit, ELF imp:CPython
loader   -> celery.loaders.app.AppLoader
settings -> transport:amqp results:cassandra

broker_url: u'amqp://guest:********@localhost:32781//'
cassandra_entry_ttl: 86400
cassandra_table: 'tasks_result'
cassandra_port: '61003'
cassandra_write_consistency: 'ONE'
cassandra_read_consistency: 'ONE'
include: [u'celery_for_medium.tasks']
result_backend: 'cassandra'
cassandra_keyspace: u'********'
cassandra_servers: ['localhost']
```
- [ ] I have verified that the issue exists against the `master` branch of Celery.

## Steps to reproduce

## Expected behavior
Result data should write correctly to cassandra database at: **localhost:61003**
## Actual behavior
```
[2018-12-07 14:28:17,815: ERROR/ForkPoolWorker-1] Control connection failed to connect, shutting down Cluster:
Traceback (most recent call last):
  File "cassandra/cluster.py", line 1301, in cassandra.cluster.Cluster.connect
    self.control_connection.connect()
  File "cassandra/cluster.py", line 2802, in cassandra.cluster.ControlConnection.connect
    self._set_new_connection(self._reconnect_internal())
  File "cassandra/cluster.py", line 2845, in cassandra.cluster.ControlConnection._reconnect_internal
    raise NoHostAvailable("Unable to connect to any servers", errors)
NoHostAvailable: ('Unable to connect to any servers', {'localhost': error(111, "Tried connecting to [('localhost', 9042)]. Last error: Connection refused")})
```


## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns

## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.

## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./CONTRIBUTING.rst
./CONTRIBUTORS.txt
./Changelog.rst
./LICENSE
./MANIFEST.in
./Makefile
./README.rst
./SECURITY.md
./TODO
./bandit.json
./celery
./celery/__init__.py
./celery/__main__.py
./celery/_state.py
./celery/app
./celery/app/__init__.py
./celery/app/amqp.py
./celery/app/annotations.py
./celery/app/autoretry.py
./celery/app/backends.py
./celery/app/base.py
./celery/app/builtins.py
./celery/app/control.py
./celery/app/defaults.py
./celery/app/events.py
./celery/app/log.py
./celery/app/registry.py
./celery/app/routes.py
./celery/app/task.py
./celery/app/trace.py
./celery/app/utils.py
./celery/apps
./celery/apps/__init__.py
./celery/apps/beat.py
./celery/apps/multi.py
./celery/apps/worker.py
./celery/backends
./celery/backends/__init__.py
./celery/backends/arangodb.py
./celery/backends/asynchronous.py
./celery/backends/azureblockblob.py
./celery/backends/base.py
./celery/backends/cache.py
./celery/backends/cassandra.py
./celery/backends/consul.py
./celery/backends/cosmosdbsql.py
./celery/backends/couchbase.py
./celery/backends/couchdb.py
./celery/backends/database
./celery/backends/dynamodb.py
./celery/backends/elasticsearch.py
./celery/backends/filesystem.py
./celery/backends/gcs.py
./celery/backends/mongodb.py
./celery/backends/redis.py
./celery/backends/rpc.py
./celery/backends/s3.py
./celery/beat.py
./celery/bin
./celery/bin/__init__.py
./celery/bin/amqp.py
./celery/bin/base.py
./celery/bin/beat.py
./celery/bin/call.py
./celery/bin/celery.py
./celery/bin/control.py
./celery/bin/events.py
./celery/bin/graph.py
./celery/bin/list.py
./celery/bin/logtool.py
./celery/bin/migrate.py
./celery/bin/multi.py
./celery/bin/purge.py
./celery/bin/result.py
./celery/bin/shell.py
./celery/bin/upgrade.py
./celery/bin/worker.py
./celery/bootsteps.py
./celery/canvas.py
./celery/concurrency
./celery/concurrency/__init__.py
./celery/concurrency/asynpool.py
./celery/concurrency/base.py
./celery/concurrency/eventlet.py
./celery/concurrency/gevent.py
./celery/concurrency/prefork.py
./celery/concurrency/solo.py
./celery/concurrency/thread.py
./celery/contrib
./celery/contrib/__init__.py
./celery/contrib/abortable.py
./celery/contrib/django
./celery/contrib/migrate.py
./celery/contrib/pytest.py
./celery/contrib/rdb.py
./celery/contrib/sphinx.py
./celery/contrib/testing
./celery/events
./celery/events/__init__.py
./celery/events/cursesmon.py
./celery/events/dispatcher.py
./celery/events/dumper.py
./celery/events/event.py
./celery/events/receiver.py
./celery/events/snapshot.py
./celery/events/state.py
./celery/exceptions.py
./celery/fixups
./celery/fixups/__init__.py
./celery/fixups/django.py
./celery/loaders
./celery/loaders/__init__.py
./celery/loaders/app.py
./celery/loaders/base.py
./celery/loaders/default.py
./celery/local.py
./celery/platforms.py
./celery/result.py
./celery/schedules.py
./celery/security
./celery/security/__init__.py
./celery/security/certificate.py
./celery/security/key.py
./celery/security/serialization.py
./celery/security/utils.py
./celery/signals.py
./celery/states.py
./celery/utils
./celery/utils/__init__.py
./celery/utils/abstract.py
./celery/utils/annotations.py
./celery/utils/collections.py
./celery/utils/debug.py
./celery/utils/deprecated.py
./celery/utils/dispatch
./celery/utils/functional.py
./celery/utils/graph.py
./celery/utils/imports.py
./celery/utils/iso8601.py
./celery/utils/log.py
./celery/utils/nodenames.py
./celery/utils/objects.py
./celery/utils/quorum_queues.py
./celery/utils/saferepr.py
./celery/utils/serialization.py
./celery/utils/static
./celery/utils/sysinfo.py
./celery/utils/term.py
./celery/utils/text.py
./celery/utils/threads.py
./celery/utils/time.py
./celery/utils/timer2.py
./celery/worker
./docker
./docker/Dockerfile
./docker/docker-compose.yml
./docker/docs
./docker/entrypoint
./docker/scripts
./docs
./examples
./extra
./extra/WindowsCMD-AzureWebJob
./extra/bash-completion
./extra/generic-init.d
./extra/macOS
./extra/release
./extra/supervisord
./extra/systemd
./extra/zsh-completion
./helm-chart
./helm-chart/Chart.yaml
./helm-chart/README.rst
./helm-chart/templates
./helm-chart/values.yaml
./pyproject.toml
./requirements
./requirements/README.rst
./requirements/default.txt
./requirements/deps
./requirements/dev.txt
./requirements/docs.txt
./requirements/extras
./requirements/pkgutils.txt
./requirements/security.txt
./requirements/test-ci-base.txt
./requirements/test-ci-default.txt
./requirements/test-integration.txt
./requirements/test-pypy3.txt
./requirements/test.txt
./setup.cfg
./setup.py
./t
./t/__init__.py
./t/benchmarks
./t/integration
./t/skip.py
./t/smoke
./t/unit
./tox.ini
```
Turn 1at 76 s173 tokens out4,734 prompt tokens
The user is reporting that the `cassandra_port` configuration is not working for the Cassandra backend in Celery.
The log shows that it's trying to connect to `localhost:9042` even though `cassandra_port` is set to `'61003'`.
`9042` is the default Cassandra port.

I need to:
1. Find the code that handles the Cassandra backend.
2. Check how it uses the `cassandra_port` setting.
3. Fix it so it uses the configured port.

Based on the workspace layout, the relevant file should be `celery/backends/cassandra.py`.
TOOL CALL · run_command
{
  "command": "grep -rn --include=\"*.py\" \"cassandra_port\" ."
}
Result of run_command 156 characters
{
  "status": "ok",
  "stdout": "./celery/backends/cassandra.py:99:        self.port = port or conf.get('cassandra_port', None)\n",
  "stderr": "",
  "exit_code": 0
}
Turn 2at 80 s61 tokens out4,976 prompt tokens
Okay, it's mentioned in `celery/backends/cassandra.py` at line 99.
Let's examine `celery/backends/cassandra.py`.
TOOL CALL · read_file
{
  "filepath": "celery/backends/cassandra.py"
}
Result of read_file 5,164 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "content": "\"\"\"Apache Cassandra result store backend using the DataStax driver.\"\"\"\nimport threading\n\nfrom celery import states\nfrom celery.exceptions import ImproperlyConfigured\nfrom celery.utils.log import get_logger\n\nfrom .base import BaseBackend\n\ntry:  # pragma: no cover\n    import cassandra\n    import cassandra.auth\n    import cassandra.cluster\n    import cassandra.query\nexcept ImportError:\n    cassandra = None\n\n\n__all__ = ('CassandraBackend',)\n\nlogger = get_logger(__name__)\n\nE_NO_CASSANDRA = \"\"\"\nYou need to install the cassandra-driver library to\nuse the Cassandra backend.  See https://github.com/datastax/python-driver\n\"\"\"\n\nE_NO_SUCH_CASSANDRA_AUTH_PROVIDER = \"\"\"\nCASSANDRA_AUTH_PROVIDER you provided is not a valid auth_provider class.\nSee https://datastax.github.io/python-driver/api/cassandra/auth.html.\n\"\"\"\n\nE_CASSANDRA_MISCONFIGURED = 'Cassandra backend improperly configured.'\n\nE_CASSANDRA_NOT_CONFIGURED = 'Cassandra backend not configured.'\n\nQ_INSERT_RESULT = \"\"\"\nINSERT INTO {table} (\n    task_id, status, result, date_done, traceback, children) VALUES (\n        %s, %s, %s, %s, %s, %s) {expires};\n\"\"\"\n\nQ_SELECT_RESULT = \"\"\"\nSELECT status, result, date_done, traceback, children\nFROM {table}\nWHERE task_id=%s\nLIMIT 1\n\"\"\"\n\nQ_CREATE_RESULT_TABLE = \"\"\"\nCREATE TABLE {table} (\n    task_id text,\n    status text,\n    result blob,\n    date_done timestamp,\n    traceback blob,\n    children blob,\n    PRIMARY KEY ((task_id), date_done)\n) WITH CLUSTERING ORDER BY (date_done DESC);\n\"\"\"\n\nQ_EXPIRES = \"\"\"\n    USING TTL {0}\n\"\"\"\n\n\ndef buf_t(x):\n    return bytes(x, 'utf8')\n\n\nclass CassandraBackend(BaseBackend):\n    \"\"\"Cassandra/AstraDB backend utilizing DataStax driver.\n\n    Raises:\n        celery.exceptions.ImproperlyConfigured:\n            if module :pypi:`cassandra-driver` is not available,\n            or not-exactly-one of the :setting:`cassandra_servers` and\n            the :setting:`cassandra_secure_bundle_path` settings is set.\n    \"\"\"\n\n    #: List of Cassandra servers with format: ``hostname``.\n    servers = None\n    #: Location of the secure connect bundle zipfile (absolute path).\n    bundle_path = None\n\n    supports_autoexpire = True      # autoexpire supported via entry_ttl\n\n    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n                 port=9042, bundle_path=None, **kwargs):\n        super().__init__(**kwargs)\n\n        if not cassandra:\n            raise ImproperlyConfigured(E_NO_CASSANDRA)\n\n        conf = self.app.conf\n        self.servers = servers or conf.get('cassandra_servers', None)\n        self.bundle_path = bundle_path or conf.get(\n            'cassandra_secure_bundle_path', None)\n        self.port = port or conf.get('cassandra_port', None)\n        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n        self.table = table or conf.get('cassandra_table', None)\n        self.cassandra_options = conf.get('cassandra_options', {})\n\n        # either servers or bundle path must be provided...\n        db_directions = self.servers or self.bundle_path\n        if not db_directions or not self.keyspace or not self.table:\n            raise ImproperlyConfigured(E_CASSANDRA_NOT_CONFIGURED)\n        # ...but not both:\n        if self.servers and self.bundle_path:\n            raise ImproperlyConfigured(E_CASSANDRA_MISCONFIGURED)\n\n        expires = entry_ttl or conf.get('cassandra_entry_ttl', None)\n\n        self.cqlexpires = (\n            Q_EXPIRES.format(expires) if expires is not None else '')\n\n        read_cons = conf.get('cassandra_read_consistency') or 'LOCAL_QUORUM'\n        write_cons = conf.get('cassandra_write_consistency') or 'LOCAL_QUORUM'\n\n        self.read_consistency = getattr(\n            cassandra.ConsistencyLevel, read_cons,\n            cassandra.ConsistencyLevel.LOCAL_QUORUM)\n        self.write_consistency = getattr(\n            cassandra.ConsistencyLevel, write_cons,\n            cassandra.ConsistencyLevel.LOCAL_QUORUM)\n\n        self.auth_provider = None\n        auth_provider = conf.get('cassandra_auth_provider', None)\n        auth_kwargs = conf.get('cassandra_auth_kwargs', None)\n        if auth_provider and auth_kwargs:\n            auth_provider_class = getattr(cassandra.auth, auth_provider, None)\n            if not auth_provider_class:\n                raise ImproperlyConfigured(E_NO_SUCH_CASSANDRA_AUTH_PROVIDER)\n            self.auth_provider = auth_provider_class(**auth_kwargs)\n\n        self._cluster = None\n        self._session = None\n        self._write_stmt = None\n        self._read_stmt = None\n        self._lock = threading.RLock()\n\n    def _get_connection(self, write=False):\n        \"\"\"Prepare the connection for action.\n\n        Arguments:\n            write (bool): are we a writer?\n        \"\"\"\n        if self._session is not None:\n            return\n        self._lock.acquire()",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 256,
  "is_truncated": true
}
Turn 3at 124 s665 tokens out6,587 prompt tokens
The `__init__` method:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)
        self.table = table or conf.get('cassandra_table', None)
        self.cassandra_options = conf.get('cassandra_options', {})
```
Wait, `port` default value is `9042`.
`self.port = port or conf.get('cassandra_port', None)`
Since `port` defaults to `9042`, `port or ...` will always be `9042` if `port` is passed as `9042`.
If `port` is not passed (it's passed as `9042` by default in `__init__` signature), then `self.port` becomes `9042`.
If the user provides `cassandra_port` in the config, it's ignored because `port` is `9042`.

Wait, the `__init__` signature is:
`def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs):`

When `CassandraBackend` is instantiated, `port` is likely not passed explicitly, so it defaults to `9042`.
Then `self.port = port or conf.get('cassandra_port', None)` evaluates to `9042 or ...`, which is `9042`.

The fix should be to check if `port` was explicitly provided or use a different default.
Generally, in Celery backends, we want to prioritize the passed argument over the configuration, but the default value in the signature shouldn't override the configuration.

If `port` is `None`, we should use the config value.
But here it's `port=9042`.

Let's see where `CassandraBackend` is instantiated. It's likely in the app's result backend setup.

Now let's look at how `self.port` is used in `_get_connection`.
I'll read the rest of the file.
TOOL CALL · read_file
{
  "filepath": "celery/backends/cassandra.py",
  "start_line": 151
}
Result of read_file 4,467 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "content": "        try:\n            if self._session is not None:\n                return\n            # using either 'servers' or 'bundle_path' here:\n            if self.servers:\n                self._cluster = cassandra.cluster.Cluster(\n                    self.servers, port=self.port,\n                    auth_provider=self.auth_provider,\n                    **self.cassandra_options)\n            else:\n                # 'bundle_path' is guaranteed to be set\n                self._cluster = cassandra.cluster.Cluster(\n                    cloud={\n                        'secure_connect_bundle': self.bundle_path,\n                    },\n                    auth_provider=self.auth_provider,\n                    **self.cassandra_options)\n            self._session = self._cluster.connect(self.keyspace)\n\n            # We're forced to do concatenation below, as formatting would\n            # blow up on superficial %s that'll be processed by Cassandra\n            self._write_stmt = cassandra.query.SimpleStatement(\n                Q_INSERT_RESULT.format(\n                    table=self.table, expires=self.cqlexpires),\n            )\n            self._write_stmt.consistency_level = self.write_consistency\n\n            self._read_stmt = cassandra.query.SimpleStatement(\n                Q_SELECT_RESULT.format(table=self.table),\n            )\n            self._read_stmt.consistency_level = self.read_consistency\n\n            if write:\n                # Only possible writers \"workers\" are allowed to issue\n                # CREATE TABLE.  This is to prevent conflicting situations\n                # where both task-creator and task-executor would issue it\n                # at the same time.\n\n                # Anyway; if you're doing anything critical, you should\n                # have created this table in advance, in which case\n                # this query will be a no-op (AlreadyExists)\n                make_stmt = cassandra.query.SimpleStatement(\n                    Q_CREATE_RESULT_TABLE.format(table=self.table),\n                )\n                make_stmt.consistency_level = self.write_consistency\n\n                try:\n                    self._session.execute(make_stmt)\n                except cassandra.AlreadyExists:\n                    pass\n\n        except cassandra.OperationTimedOut:\n            # a heavily loaded or gone Cassandra cluster failed to respond.\n            # leave this class in a consistent state\n            if self._cluster is not None:\n                self._cluster.shutdown()     # also shuts down _session\n\n            self._cluster = None\n            self._session = None\n            raise   # we did fail after all - reraise\n        finally:\n            self._lock.release()\n\n    def _store_result(self, task_id, result, state,\n                      traceback=None, request=None, **kwargs):\n        \"\"\"Store return value and state of an executed task.\"\"\"\n        self._get_connection(write=True)\n\n        self._session.execute(self._write_stmt, (\n            task_id,\n            state,\n            buf_t(self.encode(result)),\n            self.app.now(),\n            buf_t(self.encode(traceback)),\n            buf_t(self.encode(self.current_task_children(request)))\n        ))\n\n    def as_uri(self, include_password=True):\n        return 'cassandra://'\n\n    def _get_task_meta_for(self, task_id):\n        \"\"\"Get task meta-data for a task by id.\"\"\"\n        self._get_connection()\n\n        res = self._session.execute(self._read_stmt, (task_id, )).one()\n        if not res:\n            return {'status': states.PENDING, 'result': None}\n\n        status, result, date_done, traceback, children = res\n\n        return self.meta_from_decoded({\n            'task_id': task_id,\n            'status': status,\n            'result': self.decode(result),\n            'date_done': date_done,\n            'traceback': self.decode(traceback),\n            'children': self.decode(children),\n        })\n\n    def __reduce__(self, args=(), kwargs=None):\n        kwargs = {} if not kwargs else kwargs\n        kwargs.update(\n            {'servers': self.servers,\n             'keyspace': self.keyspace,\n             'table': self.table})\n        return super().__reduce__(args, kwargs)",
  "start_line": 151,
  "end_line": 256,
  "total_lines": 256,
  "is_truncated": false
}
Turn 4at 196 s1,215 tokens out8,393 prompt tokens
The problem is definitely here:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
If `port` is passed as `9042` (the default), `self.port` becomes `9042`.
If the user wants to use `cassandra_port` from the config, it is ignored because `9042` is truthy.

To fix this, I should change the default value of `port` to `None` in the `__init__` signature, and then set the default to `9042` if both the argument and the config are `None`.

Wait, if I change the default to `None`:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', 9042)
```
But wait, `conf.get('cassandra_port', None)` might return `None` if it's not set.
So:
```python
        self.port = port or conf.get('cassandra_port') or 9042
```
Wait, if `cassandra_port` is set to something falsy (which shouldn't happen for a port), it would go to 9042. That's fine.

Let's see what's the best way to do this.
Original:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
If `port` is passed as `None` in the call, it's still `9042` because of the default.
If `port` is not passed, it's `9042`.

If I change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', 9042)
```
If `port` is provided, it's used. If not, it checks `cassandra_port`. If that's not provided, it uses `9042`.
This seems correct.

Let's verify if there are any other places where `cassandra_port` is used. I already did a `grep`.

Now, let's try to reproduce this.
I don't have a Cassandra server running, so I have to mock it or write a test that checks the initialization.
I can write a small script that instantiates `CassandraBackend` with a mock app and config.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def test_port_from_config(self):\n        app = MagicMock()\n        app.conf = {'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl'}\n        # We need to mock cassandra since it might not be installed or we don't want to connect\n        import celery.backends.cassandra\n        celery.backends.cassandra.cassandra = MagicMock()\n        \n        backend = CassandraBackend(app=app)\n        print(f\"Expected: 61003, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 61003)\n\n    def test_port_from_arg(self):\n        app = MagicMock()\n        app.conf = {'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl'}\n        import celery.backends.cassandra\n        celery.backends.cassandra.cassandra = MagicMock()\n        \n        backend = CassandraBackend(app=app, port=7000)\n        print(f\"Expected: 7000, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 7000)\n\n    def test_port_default(self):\n        app = MagicMock()\n        app.conf = {'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl'}\n        import celery.backends.cassandra\n        celery.backends.cassandra.cassandra = MagicMock()\n        \n        backend = CassandraBackend(app=app)\n        print(f\"Expected: 9042, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 9042)\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 3,983 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "EEE\n======================================================================\nERROR: test_port_default (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 33, in test_port_default\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_from_arg (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 23, in test_port_from_arg\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_from_config (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 13, in test_port_from_config\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n----------------------------------------------------------------------\nRan 3 tests in 0.002s\n\nFAILED (errors=3)\n",
  "details": {
    "stdout": "",
    "stderr": "EEE\n======================================================================\nERROR: test_port_default (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 33, in test_port_default\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_from_arg (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 23, in test_port_from_arg\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_from_config (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 13, in test_port_from_config\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n----------------------------------------------------------------------\nRan 3 tests in 0.002s\n\nFAILED (errors=3)\n",
    "exit_code": 1
  }
}
Turn 5at 223 s628 tokens out10,671 prompt tokens
Ah, `app.conf` is expected to be an object with attributes, not a dictionary.
I should use a `MagicMock` for `conf` as well.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock\nimport celery.backends.cassandra\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def setUp(self):\n        # Mock the cassandra module to avoid import errors or connection attempts\n        celery.backends.cassandra.cassandra = MagicMock()\n\n    def test_port_from_config(self):\n        app = MagicMock()\n        conf = MagicMock()\n        conf.get.side_effect = lambda key, default=None: {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }.get(key, default)\n        app.conf = conf\n        \n        backend = CassandraBackend(app=app)\n        print(f\"Test Port from Config - Expected: 61003, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 61003)\n\n    def test_port_from_arg(self):\n        app = MagicMock()\n        conf = MagicMock()\n        conf.get.side_effect = lambda key, default=None: {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }.get(key, default)\n        app.conf = conf\n        \n        backend = CassandraBackend(app=app, port=7000)\n        print(f\"Test Port from Arg - Expected: 7000, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 7000)\n\n    def test_port_default(self):\n        app = MagicMock()\n        conf = MagicMock()\n        conf.get.side_effect = lambda key, default=None: {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }.get(key, default)\n        app.conf = conf\n        \n        backend = CassandraBackend(app=app)\n        print(f\"Test Port Default - Expected: 9042, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 9042)\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 4,097 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "EEE\n======================================================================\nERROR: test_port_default (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 51, in test_port_default\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='127366072676416'>\n\n======================================================================\nERROR: test_port_from_arg (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 37, in test_port_from_arg\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='127366072952784'>\n\n======================================================================\nERROR: test_port_from_config (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 22, in test_port_from_config\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='127366073032400'>\n\n----------------------------------------------------------------------\nRan 3 tests in 0.002s\n\nFAILED (errors=3)\n",
  "details": {
    "stdout": "",
    "stderr": "EEE\n======================================================================\nERROR: test_port_default (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 51, in test_port_default\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='127366072676416'>\n\n======================================================================\nERROR: test_port_from_arg (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 37, in test_port_from_arg\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='127366072952784'>\n\n======================================================================\nERROR: test_port_from_config (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 22, in test_port_from_config\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='127366073032400'>\n\n----------------------------------------------------------------------\nRan 3 tests in 0.002s\n\nFAILED (errors=3)\n",
    "exit_code": 1
  }
}
Turn 6at 248 s639 tokens out12,500 prompt tokens
The `BaseBackend.__init__` is trying to access `conf.result_serializer` and lookup the encoder.
I need to make sure `conf.result_serializer` returns a valid serializer name (e.g., `'json'`).
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock\nimport celery.backends.cassandra\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def setUp(self):\n        # Mock the cassandra module to avoid import errors or connection attempts\n        celery.backends.cassandra.cassandra = MagicMock()\n\n    def _create_backend(self, conf_dict, port=None):\n        app = MagicMock()\n        conf = MagicMock()\n        # Set default result_serializer to 'json' to satisfy BaseBackend\n        conf.result_serializer = 'json'\n        conf.get.side_effect = lambda key, default=None: conf_dict.get(key, default)\n        app.conf = conf\n        return CassandraBackend(app=app, port=port)\n\n    def test_port_from_config(self):\n        conf_dict = {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }\n        backend = self._create_backend(conf_dict)\n        print(f\"Test Port from Config - Expected: 61003, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 61003)\n\n    def test_port_from_arg(self):\n        conf_dict = {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }\n        backend = self._create_backend(conf_dict, port=7000)\n        print(f\"Test Port from Arg - Expected: 7000, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 7000)\n\n    def test_port_default(self):\n        conf_dict = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }\n        backend = self._create_backend(conf_dict)\n        print(f\"Test Port Default - Expected: 9042, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 9042)\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 1,178 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "F..\n======================================================================\nFAIL: test_port_default (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 50, in test_port_default\nAssertionError: None != 9042\n\n----------------------------------------------------------------------\nRan 3 tests in 0.004s\n\nFAILED (failures=1)\n",
  "details": {
    "stdout": "Test Port Default - Expected: 9042, Actual: None\nTest Port from Arg - Expected: 7000, Actual: 7000\nTest Port from Config - Expected: 61003, Actual: 61003\n",
    "stderr": "F..\n======================================================================\nFAIL: test_port_default (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 50, in test_port_default\nAssertionError: None != 9042\n\n----------------------------------------------------------------------\nRan 3 tests in 0.004s\n\nFAILED (failures=1)\n",
    "exit_code": 1
  }
}
Turn 7at 284 s725 tokens out13,474 prompt tokens
Wait, `test_port_from_config` passed, and `test_port_from_arg` passed.
But `test_port_default` failed: `Expected: 9042, Actual: None`.

Let's look at the current code in `celery/backends/cassandra.py`:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
Wait, if `port` is `9042` and `conf.get('cassandra_port', None)` is `None`, then `self.port` should be `9042`.

Wait, if `port=9042` by default in `__init__`, why did my test get `None`?
Let's re-read the test and the output.
`Test Port Default - Expected: 9042, Actual: None`

Ah! I see what happened. In my test, I called `CassandraBackend(app=app)`.
Wait, if I call `CassandraBackend(app=app)`, the arguments are:
`servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None`
Then `self.port = 9042 or conf.get('cassandra_port', None)`.
`9042` is truthy, so `self.port` should be `9042`.

Why did the test output `Actual: None`?
Let me check the file content again. I read it earlier.
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
Wait, let me read the file again, maybe I misread it or it changed? No, I only read it.

Wait, I might have misread the traceback of the previous failure.
No, it says `AssertionError: None != 9042`.

Let me re-run the reproduction script and print `backend.port` and `port` inside `__init__` if I can, or just double check everything.
Actually, maybe `port` was passed as `None` explicitly by the test? No.
`backend = self._create_backend(conf_dict)` where `_create_backend` calls `CassandraBackend(app=app)`.

Wait, I used `MagicMock` for `app` and `conf`.
Is it possible that `CassandraBackend` is not the one I think it is?
Wait, I imported it: `from celery.backends.cassandra import CassandraBackend`.

Let me print the code of `CassandraBackend.__init__` just to be sure.
TOOL CALL · run_command
{
  "command": "grep -n \"def __init__\" celery/backends/cassandra.py -A 20"
}
Result of run_command 1,155 characters
{
  "status": "ok",
  "stdout": "88:    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n89-                 port=9042, bundle_path=None, **kwargs):\n90-        super().__init__(**kwargs)\n91-\n92-        if not cassandra:\n93-            raise ImproperlyConfigured(E_NO_CASSANDRA)\n94-\n95-        conf = self.app.conf\n96-        self.servers = servers or conf.get('cassandra_servers', None)\n97-        self.bundle_path = bundle_path or conf.get(\n98-            'cassandra_secure_bundle_path', None)\n99-        self.port = port or conf.get('cassandra_port', None)\n100-        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n101-        self.table = table or conf.get('cassandra_table', None)\n102-        self.cassandra_options = conf.get('cassandra_options', {})\n103-\n104-        # either servers or bundle path must be provided...\n105-        db_directions = self.servers or self.bundle_path\n106-        if not db_directions or not self.keyspace or not self.table:\n107-            raise ImproperlyConfigured(E_CASSANDRA_NOT_CONFIGURED)\n108-        # ...but not both:\n",
  "stderr": "",
  "exit_code": 0
}
Turn 8at 323 s1,115 tokens out14,598 prompt tokens
Wait, the `grep` shows:
```python
88:    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
89-                 port=9042, bundle_path=None, **kwargs):
```
And `self.port = port or conf.get('cassandra_port', None)` at line 99.

If `port` is `9042`, then `self.port` must be `9042`.
Why did my test say `None`?

Let me look at my test again:
```python
    def _create_backend(self, conf_dict, port=None):
        app = MagicMock()
        conf = MagicMock()
        # Set default result_serializer to 'json' to satisfy BaseBackend
        conf.result_serializer = 'json'
        conf.get.side_effect = lambda key, default=None: conf_dict.get(key, default)
        app.conf = conf
        return CassandraBackend(app=app, port=port)
```
Aha!!!
In `_create_backend`, I have `port=None` as a default argument.
And I call `CassandraBackend(app=app, port=port)`.
If I call `self._create_backend(conf_dict)`, then `port` is `None`.
So I call `CassandraBackend(app=app, port=None)`.
Inside `CassandraBackend.__init__`, `port` is now `None` (overriding the default `9042`).
Then `self.port = None or conf.get('cassandra_port', None)`.
If `cassandra_port` is not in `conf_dict`, then `self.port` becomes `None`.

That's why `test_port_default` failed!
And `test_port_from_config` passed because `cassandra_port` was in `conf_dict`.
And `test_port_from_arg` passed because I passed `port=7000` to `_create_backend`, which then passed `port=7000` to `CassandraBackend`.

So my test actually proved that the current implementation does NOT use `9042` as a default if `port=None` is passed. But in Celery, the backend is usually instantiated with only `app` (and maybe some other args), and the `port` should be picked up from config or default to `9042`.

If the user sets `cassandra_port` in the config, it is ignored because `port` defaults to `9042`.
My `test_port_from_config` passed, but wait, did it?
```python
    def test_port_from_config(self):
        conf_dict = {
            'cassandra_port': 61003,
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'ks',
            'cassandra_table': 'tbl',
        }
        backend = self._create_backend(conf_dict)
```
`_create_backend(conf_dict)` calls `CassandraBackend(app=app, port=None)`.
Then `self.port = None or conf.get('cassandra_port', None)` which is `61003`.
So `test_port_from_config` passed only because I passed `port=None` to `CassandraBackend`!

If I don't pass `port=None`, and just let it use the default `9042`, then `test_port_from_config` would fail.

Let's verify this.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock\nimport celery.backends.cassandra\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def setUp(self):\n        celery.backends.cassandra.cassandra = MagicMock()\n\n    def test_port_from_config_fail(self):\n        app = MagicMock()\n        conf = MagicMock()\n        conf.result_serializer = 'json'\n        conf.get.side_effect = lambda key, default=None: {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }.get(key, default)\n        app.conf = conf\n        \n        # Instantiate WITHOUT passing port, let it use the default 9042\n        backend = CassandraBackend(app=app)\n        print(f\"Expected: 61003, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 61003)\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 1,084 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "F\n======================================================================\nFAIL: test_port_from_config_fail (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 25, in test_port_from_config_fail\nAssertionError: 9042 != 61003\n\n----------------------------------------------------------------------\nRan 1 test in 0.001s\n\nFAILED (failures=1)\n",
  "details": {
    "stdout": "Expected: 61003, Actual: 9042\n",
    "stderr": "F\n======================================================================\nFAIL: test_port_from_config_fail (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 25, in test_port_from_config_fail\nAssertionError: 9042 != 61003\n\n----------------------------------------------------------------------\nRan 1 test in 0.001s\n\nFAILED (failures=1)\n",
    "exit_code": 1
  }
}
Turn 9at 386 s1,188 tokens out5,821 prompt tokens
Yes! That confirms it. `9042` took precedence over `61003`.

Now I can fix it.
I will change the `__init__` signature to `port=None` and the assignment to:
`self.port = port or conf.get('cassandra_port') or 9042`

Wait, what if `port` is `0`? `0` is falsy. But port `0` is rarely used.
Usually we use `port is not None`.

Let's be precise.
The priority should be:
1. `port` argument (if provided)
2. `conf.get('cassandra_port')` (if provided)
3. `9042` (default)

So:
```python
        self.port = port if port is not None else conf.get('cassandra_port') or 9042
```
Wait, if `conf.get('cassandra_port')` returns `None`, then `None or 9042` is `9042`.
If `conf.get('cassandra_port')` returns `61003`, then `61003 or 9042` is `61003`.

Wait, what if `cassandra_port` is `0`? It's unlikely but `port or 9042` would make it `9042`.
Using `port is not None` for the argument is safer.
For the config, usually `conf.get` returns `None` if not set.

Let's check how others do it in `celery/backends/cassandra.py`.
```python
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get('cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)
        self.table = table or conf.get('cassandra_table', None)
```
They all use `or`. For servers, keyspace, table, they probably don't care about `0` or `""`. For port, it's an integer.

If I change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port') or 9042
```
This is simple and consistent with the surrounding code.
Let's verify if `port=0` is a thing. In most networking code, port 0 is special.

Actually, the best way to handle defaults in Celery is often:
`self.port = port if port is not None else conf.get('cassandra_port', 9042)`
But the `conf.get` second argument is the default.

Let's see:
If `port` is `None`:
- `conf.get('cassandra_port', 9042)` returns `cassandra_port` if present, else `9042`.
If `port` is `7000`:
- `port` is used.

Wait, if `cassandra_port` is present in config and set to `None` explicitly? (unlikely).

The proposed fix in the context was:
"priority to the passed port argument, followed by the cassandra_port configuration value, and finally fall back to 9042 as the ultimate default."

Implementation:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port') or 9042
```

Wait, if `port` is `None` and `conf.get('cassandra_port')` is `None`, it becomes `9042`.
If `port` is `None` and `conf.get('cassandra_port')` is `61003`, it becomes `61003`.
If `port` is `7000`, it becomes `7000`.

This seems correct and fits the Celery style.

Let's double check the line numbers.
Line 89: `port=9042, bundle_path=None, **kwargs):`
Line 99: `self.port = port or conf.get('cassandra_port', None)`

I will change line 89 and line 99.

Wait, I should also check if `port` is used anywhere else before it's assigned to `self.port`.
No, it's only used at line 99.

Let's apply the fix.
TOOL CALL · edit_file
{
  "filepath": "celery/backends/cassandra.py",
  "new_string": "                port=None, bundle_path=None, **kwargs):",
  "old_string": "                port=9042, bundle_path=None, **kwargs):"
}
Result of edit_file 571 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "occurrences": 1,
  "strategy": "exact",
  "diff": "--- a/celery/backends/cassandra.py\n+++ b/celery/backends/cassandra.py\n@@ -86,7 +86,7 @@\n     supports_autoexpire = True      # autoexpire supported via entry_ttl\n \n     def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n-                 port=9042, bundle_path=None, **kwargs):\n+                 port=None, bundle_path=None, **kwargs):\n         super().__init__(**kwargs)\n \n         if not cassandra:\n",
  "is_truncated": false
}
Turn 10at 388 s84 tokens out7,208 prompt tokens
Now the second part of the fix.
TOOL CALL · edit_file
{
  "filepath": "celery/backends/cassandra.py",
  "new_string": "        self.port = port or conf.get('cassandra_port') or 9042",
  "old_string": "        self.port = port or conf.get('cassandra_port', None)"
}
Result of edit_file 741 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "occurrences": 1,
  "strategy": "exact",
  "diff": "--- a/celery/backends/cassandra.py\n+++ b/celery/backends/cassandra.py\n@@ -96,7 +96,7 @@\n         self.servers = servers or conf.get('cassandra_servers', None)\n         self.bundle_path = bundle_path or conf.get(\n             'cassandra_secure_bundle_path', None)\n-        self.port = port or conf.get('cassandra_port', None)\n+        self.port = port or conf.get('cassandra_port') or 9042\n         self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n         self.table = table or conf.get('cassandra_table', None)\n         self.cassandra_options = conf.get('cassandra_options', {})\n",
  "is_truncated": false
}
Turn 11at 401 s912 tokens out7,538 prompt tokens
Now I will run the reproduction tests again.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock\nimport celery.backends.cassandra\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def setUp(self):\n        # Mock the cassandra module to avoid import errors or connection attempts\n        celery.backends.cassandra.cassandra = MagicMock()\n\n    def _create_backend(self, conf_dict, port=None):\n        app = MagicMock()\n        conf = MagicMock()\n        # Set default result_serializer to 'json' to satisfy BaseBackend\n        conf.result_serializer = 'json'\n        conf.get.side_effect = lambda key, default=None: conf_dict.get(key, default)\n        app.conf = conf\n        # Use kwargs to pass port exactly how it's passed in the real world\n        # (or just call it directly)\n        return CassandraBackend(app=app, port=port)\n\n    def test_port_from_config(self):\n        conf_dict = {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }\n        # Test without passing port argument (uses default None)\n        backend = CassandraBackend(app=MagicMock(), port=None) # simulating no port passed\n        # But wait, to simulate properly, I just instantiate it.\n        # I'll redefine _create_backend loosely or just do it inline.\n        pass\n\n    def test_port_from_config_real(self):\n        app = MagicMock()\n        conf = MagicMock()\n        conf.result_serializer = 'json'\n        conf.get.side_effect = lambda key, default=None: {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }.get(key, default)\n        app.conf = conf\n        \n        backend = CassandraBackend(app=app)\n        print(f\"Test Port from Config - Expected: 61003, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 61003)\n\n    def test_port_from_arg_real(self):\n        app = MagicMock()\n        conf = MagicMock()\n        conf.result_serializer = 'json'\n        conf.get.side_effect = lambda key, default=None: {\n            'cassandra_port': 61003,\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }.get(key, default)\n        app.conf = conf\n        \n        backend = CassandraBackend(app=app, port=7000)\n        print(f\"Test Port from Arg - Expected: 7000, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 7000)\n\n    def test_port_default_real(self):\n        app = MagicMock()\n        conf = MagicMock()\n        conf.result_serializer = 'json'\n        conf.get.side_effect = lambda key, default=None: {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'ks',\n            'cassandra_table': 'tbl',\n        }.get(key, default)\n        app.conf = conf\n        \n        backend = CassandraBackend(app=app)\n        print(f\"Test Port Default - Expected: 9042, Actual: {backend.port}\")\n        self.assertEqual(backend.port, 9042)\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 1,780 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "..E.\n======================================================================\nERROR: test_port_from_config (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 30, in test_port_from_config\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='138527998789616'>\n\n----------------------------------------------------------------------\nRan 4 tests in 0.005s\n\nFAILED (errors=1)\n",
  "details": {
    "stdout": "Test Port Default - Expected: 9042, Actual: 9042\nTest Port from Arg - Expected: 7000, Actual: 7000\nTest Port from Config - Expected: 61003, Actual: 61003\n",
    "stderr": "..E.\n======================================================================\nERROR: test_port_from_config (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 30, in test_port_from_config\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 119, in __init__\n    self.encoder) = serializer_registry._encoders[self.serializer]\nKeyError: <MagicMock name='mock.conf.result_serializer' id='138527998789616'>\n\n----------------------------------------------------------------------\nRan 4 tests in 0.005s\n\nFAILED (errors=1)\n",
    "exit_code": 1
  }
}
Turn 12at 408 s264 tokens out9,004 prompt tokens
The error in `test_port_from_config` is just because I left an empty `pass` in there and it didn't really run the test logic but something went wrong with how I structured the class. Actually, `test_port_from_config` was calling `CassandraBackend(app=MagicMock(), port=None)` but didn't set up the `app.conf` properly.

The other three tests (`test_port_from_config_real`, `test_port_from_arg_real`, `test_port_default_real`) passed!

Stdout:
```
Test Port Default - Expected: 9042, Actual: 9042
Test Port from Arg - Expected: 7000, Actual: 7000
Test Port from Config - Expected: 61003, Actual: 61003
```

This proves the fix works.

Now let's just run all tests in `tests/` if there are any for Cassandra backend.
TOOL CALL · run_command
{
  "command": "grep -rn \"Cassandra\" tests/ | grep \"test_*.py\" | head -n 20"
}
Result of run_command 101 characters
{
  "status": "ok",
  "stdout": "",
  "stderr": "grep: tests/: No such file or directory\n",
  "exit_code": 0
}
Turn 13at 410 s69 tokens out9,317 prompt tokens
Wait, `tests/` directory not found? Let me check the workspace layout again.
Ah, the user said `Workspace Layout` but didn't provide it in the prompt.
Wait, I should have checked `ls -F`.
TOOL CALL · run_command
{
  "command": "ls -F"
}
Result of run_command 310 characters
{
  "status": "ok",
  "stdout": "CONTRIBUTING.rst\nCONTRIBUTORS.txt\nChangelog.rst\nLICENSE\nMANIFEST.in\nMakefile\nREADME.rst\nSECURITY.md\nTODO\nbandit.json\ncelery/\ndocker/\ndocs/\nexamples/\nextra/\nhelm-chart/\npyproject.toml\nrequirements/\nsetup.cfg\nsetup.py*\nt/\ntox.ini\n",
  "stderr": "",
  "exit_code": 0
}
Turn 14at 411 s55 tokens out9,520 prompt tokens
Ah, the tests are in `t/`, not `tests/`.
TOOL CALL · run_command
{
  "command": "grep -rn \"Cassandra\" t/ | grep \"test_*.py\" | head -n 20"
}
Result of run_command 60 characters
{
  "status": "ok",
  "stdout": "",
  "stderr": "",
  "exit_code": 0
}
Turn 15at 412 s56 tokens out9,612 prompt tokens
No tests for Cassandra backend in `t/`? That's surprising. Let me search for `CassandraBackend` in `t/`.
TOOL CALL · run_command
{
  "command": "grep -rn \"CassandraBackend\" t/"
}
Result of run_command 1,574 characters
{
  "status": "ok",
  "stdout": "t/unit/backends/test_cassandra.py:19:class test_CassandraBackend:\nt/unit/backends/test_cassandra.py:36:                mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:52:        mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:54:        mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:60:            mod.CassandraBackend(\nt/unit/backends/test_cassandra.py:69:            mod.CassandraBackend(\nt/unit/backends/test_cassandra.py:96:        x = mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:103:        from celery.backends.cassandra import CassandraBackend\nt/unit/backends/test_cassandra.py:104:        assert loads(dumps(CassandraBackend(app=self.app)))\nt/unit/backends/test_cassandra.py:111:        x = mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:133:        x = mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:142:        x = mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:170:        x = mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:205:        x = mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:225:        x = mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:250:        mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:258:            mod.CassandraBackend(app=self.app)\nt/unit/backends/test_cassandra.py:270:        mod.CassandraBackend(app=self.app)\n",
  "stderr": "",
  "exit_code": 0
}
Turn 16at 413 s62 tokens out10,220 prompt tokens
Okay, they are in `t/unit/backends/test_cassandra.py`. Let's run them.
TOOL CALL · run_command
{
  "command": "pytest t/unit/backends/test_cassandra.py -q --tb=short --no-header"
}
Result of run_command 161 characters
{
  "status": "ok",
  "stdout": "............                                                             [100%]\n12 passed in 0.05s\n",
  "stderr": "",
  "exit_code": 0
}
Turn 17at 418 s165 tokens out10,342 prompt tokens
All tests passed.
I have:
1. Confirmed the bug with a reproduction script.
2. Fixed the bug by changing the default `port` to `None` and implementing a fallback priority: `port` arg -> `cassandra_port` config -> `9042`.
3. Verified the fix with the reproduction script.
4. Verified that existing tests for Cassandra backend still pass.
5. Verified there are no other parallel paths that need updating (Cassandra backend seems to be a single implementation).

I should double check if there are any other Cassandra related backends.
`grep -rn "Cassandra" celery/backends/`
TOOL CALL · run_command
{
  "command": "grep -rn \"Cassandra\" celery/backends/"
}
Result of run_command 1,020 characters
{
  "status": "ok",
  "stdout": "celery/backends/cassandra.py:1:\"\"\"Apache Cassandra result store backend using the DataStax driver.\"\"\"\ncelery/backends/cassandra.py:19:__all__ = ('CassandraBackend',)\ncelery/backends/cassandra.py:25:use the Cassandra backend.  See https://github.com/datastax/python-driver\ncelery/backends/cassandra.py:33:E_CASSANDRA_MISCONFIGURED = 'Cassandra backend improperly configured.'\ncelery/backends/cassandra.py:35:E_CASSANDRA_NOT_CONFIGURED = 'Cassandra backend not configured.'\ncelery/backends/cassandra.py:71:class CassandraBackend(BaseBackend):\ncelery/backends/cassandra.py:72:    \"\"\"Cassandra/AstraDB backend utilizing DataStax driver.\ncelery/backends/cassandra.py:81:    #: List of Cassandra servers with format: ``hostname``.\ncelery/backends/cassandra.py:171:            # blow up on superficial %s that'll be processed by Cassandra\ncelery/backends/cassandra.py:203:            # a heavily loaded or gone Cassandra cluster failed to respond.\n",
  "stderr": "",
  "exit_code": 0
}
Turn 18at 420 s36 tokens out10,828 prompt tokens
Only `celery/backends/cassandra.py` exists as a Cassandra backend.

I'm confident in the fix.
TOOL CALL · get_status
Result of get_status 294 characters
{
  "status": "ok",
  "tool_calls_used": 17,
  "patch_submitted": false,
  "patch_size": 0,
  "tool_calls_remaining": 13,
  "max_tool_calls": 30,
  "time_seconds_remaining": 87.82263491999947,
  "max_time_minutes": 7.5,
  "agent_elapsed_seconds": 362.1773657600006,
  "max_turns": 40,
  "command_timeout_seconds": 90
}
Turn 19at 421 s28 tokens out11,018 prompt tokens
Final check of the changes.
TOOL CALL · run_command
{
  "command": "git status --short && git diff"
}
Result of run_command 1,244 characters
{
  "status": "ok",
  "stdout": " M celery/backends/cassandra.py\ndiff --git a/celery/backends/cassandra.py b/celery/backends/cassandra.py\nindex 0eb37f3..ff7128b 100644\n--- a/celery/backends/cassandra.py\n+++ b/celery/backends/cassandra.py\n@@ -86,7 +86,7 @@ class CassandraBackend(BaseBackend):\n     supports_autoexpire = True      # autoexpire supported via entry_ttl\n \n     def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n-                 port=9042, bundle_path=None, **kwargs):\n+                 port=None, bundle_path=None, **kwargs):\n         super().__init__(**kwargs)\n \n         if not cassandra:\n@@ -96,7 +96,7 @@ class CassandraBackend(BaseBackend):\n         self.servers = servers or conf.get('cassandra_servers', None)\n         self.bundle_path = bundle_path or conf.get(\n             'cassandra_secure_bundle_path', None)\n-        self.port = port or conf.get('cassandra_port', None)\n+        self.port = port or conf.get('cassandra_port') or 9042\n         self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n         self.table = table or conf.get('cassandra_table', None)\n         self.cassandra_options = conf.get('cassandra_options', {})\n",
  "stderr": "",
  "exit_code": 0
}
Turn 20at 422 s22 tokens out11,457 prompt tokens
The diff is clean and correct.
Final submission.
TOOL CALL · submit_patch
Result of submit_patch 56 characters
{
  "status": "ok",
  "patch_size": 1129,
  "files_changed": 1
}
Turn 21at 426 s145 tokens out11,519 prompt tokens
Done.
Turn 22at 426 s
The `cassandra_port` configuration was being ignored because the `CassandraBackend.__init__` method used a default value of `9042` for the `port` argument. Since `9042` is truthy, the expression `self.port = port or conf.get('cassandra_port', None)` always prioritized the default argument over the configuration value.

I updated the `port` argument default to `None` and modified the assignment to `self.port = port or conf.get('cassandra_port') or 9042`, ensuring the priority order: explicit argument, then configuration value, then the default port 9042.

Model calls (not matched to turns)

Generated tokens 173 tokens · stopped: STOP
The user is reporting that the `cassandra_port` configuration is not working for the Cassandra backend in Celery.
The log shows that it's trying to connect to `localhost:9042` even though `cassandra_port` is set to `'61003'`.
`9042` is the default Cassandra port.

I need to:
1. Find the code that handles the Cassandra backend.
2. Check how it uses the `cassandra_port` setting.
3. Fix it so it uses the configured port.

Based on the workspace layout, the relevant file should be `celery/backends/cassandra.py`.
<|channel>thought The user is reporting that the `cassandra_port` configuration is not working for the Cassandra backend in Celery. The log shows that it's trying to connect to `localhost:9042` even though `cassandra_port` is set to `'61003'`. `9042` is the default Cassandra port. I need to: 1. Find the code that handles the Cassandra backend. 2. Check how it uses the `cassandra_port` setting. 3. Fix it so it uses the configured port. Based on the workspace layout, the relevant file should be `celery/backends/cassandra.py`.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "cassandra_port" .<|"|>}<tool_call|><|tool_response>
Generated tokens 61 tokens · stopped: STOP
Okay, it's mentioned in `celery/backends/cassandra.py` at line 99.
Let's examine `celery/backends/cassandra.py`.
Okay, it's mentioned in `celery/backends/cassandra.py` at line 99. Let's examine `celery/backends/cassandra.py`.<channel|><|tool_call>call:read_file{filepath:<|"|>celery/backends/cassandra.py<|"|>}<tool_call|><|tool_response>
Generated tokens 665 tokens · stopped: STOP
The `__init__` method:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)
        self.table = table or conf.get('cassandra_table', None)
        self.cassandra_options = conf.get('cassandra_options', {})
```
Wait, `port` default value is `9042`.
`self.port = port or conf.get('cassandra_port', None)`
Since `port` defaults to `9042`, `port or ...` will always be `9042` if `port` is passed as `9042`.
If `port` is not passed (it's passed as `9042` by default in `__init__` signature), then `self.port` becomes `9042`.
If the user provides `cassandra_port` in the config, it's ignored because `port` is `9042`.

Wait, the `__init__` signature is:
`def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs):`

When `CassandraBackend` is instantiated, `port` is likely not passed explicitly, so it defaults to `9042`.
Then `self.port = port or conf.get('cassandra_port', None)` evaluates to `9042 or ...`, which is `9042`.

The fix should be to check if `port` was explicitly provided or use a different default.
Generally, in Celery backends, we want to prioritize the passed argument over the configuration, but the default value in the signature shouldn't override the configuration.

If `port` is `None`, we should use the config value.
But here it's `port=9042`.

Let's see where `CassandraBackend` is instantiated. It's likely in the app's result backend setup.

Now let's look at how `self.port` is used in `_get_connection`.
I'll read the rest of the file.
The `__init__` method: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', None) self.keyspace = keyspace or conf.get('cassandra_keyspace', None) self.table = table or conf.get('cassandra_table', None) self.cassandra_options = conf.get('cassandra_options', {}) ``` Wait, `port` default value is `9042`. `self.port = port or conf.get('cassandra_port', None)` Since `port` defaults to `9042`, `port or ...` will always be `9042` if `port` is passed as `9042`. If `port` is not passed (it's passed as `9042` by default in `__init__` signature), then `self.port` becomes `9042`. If the user provides `cassandra_port` in the config, it's ignored because `port` is `9042`. Wait, the `__init__` signature is: `def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs):` When `CassandraBackend` is instantiated, `port` is likely not passed explicitly, so it defaults to `9042`. Then `self.port = port or conf.get('cassandra_port', None)` evaluates to `9042 or ...`, which is `9042`. The fix should be to check if `port` was explicitly provided or use a different default. Generally, in Celery backends, we want to prioritize the passed argument over the configuration, but the default value in the signature shouldn't override the configuration. If `port` is `None`, we should use the config value. But here it's `port=9042`. Let's see where `CassandraBackend` is instantiated. It's likely in the app's result backend setup. Now let's look at how `self.port` is used in `_get_connection`. I'll read the rest of the file. <channel|><|tool_call>call:read_file{filepath:<|"|>celery/backends/cassandra.py<|"|>,start_line:151}<tool_call|><|tool_response>
Generated tokens 1,215 tokens · stopped: STOP
The problem is definitely here:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
If `port` is passed as `9042` (the default), `self.port` becomes `9042`.
If the user wants to use `cassandra_port` from the config, it is ignored because `9042` is truthy.

To fix this, I should change the default value of `port` to `None` in the `__init__` signature, and then set the default to `9042` if both the argument and the config are `None`.

Wait, if I change the default to `None`:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', 9042)
```
But wait, `conf.get('cassandra_port', None)` might return `None` if it's not set.
So:
```python
        self.port = port or conf.get('cassandra_port') or 9042
```
Wait, if `cassandra_port` is set to something falsy (which shouldn't happen for a port), it would go to 9042. That's fine.

Let's see what's the best way to do this.
Original:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
If `port` is passed as `None` in the call, it's still `9042` because of the default.
If `port` is not passed, it's `9042`.

If I change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', 9042)
```
If `port` is provided, it's used. If not, it checks `cassandra_port`. If that's not provided, it uses `9042`.
This seems correct.

Let's verify if there are any other places where `cassandra_port` is used. I already did a `grep`.

Now, let's try to reproduce this.
I don't have a Cassandra server running, so I have to mock it or write a test that checks the initialization.
I can write a small script that instantiates `CassandraBackend` with a mock app and config.

The problem is definitely here: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port', None) ``` If `port` is passed as `9042` (the default), `self.port` becomes `9042`. If the user wants to use `cassandra_port` from the config, it is ignored because `9042` is truthy. To fix this, I should change the default value of `port` to `None` in the `__init__` signature, and then set the default to `9042` if both the argument and the config are `None`. Wait, if I change the default to `None`: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port', 9042) ``` But wait, `conf.get('cassandra_port', None)` might return `None` if it's not set. So: ```python self.port = port or conf.get('cassandra_port') or 9042 ``` Wait, if `cassandra_port` is set to something falsy (which shouldn't happen for a port), it would go to 9042. That's fine. Let's see what's the best way to do this. Original: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port', None) ``` If `port` is passed as `None` in the call, it's still `9042` because of the default. If `port` is not passed, it's `9042`. If I change it to: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port', 9042) ``` If `port` is provided, it's used. If not, it checks `cassandra_port`. If that's not provided, it uses `9042`. This seems correct. Let's verify if there are any other places where `cassandra_port` is used. I already did a `grep`. Now, let's try to reproduce this. I don't have a Cassandra server running, so I have to mock it or write a test that checks the initialization. I can write a small script that instantiates `CassandraBackend` with a mock app and config. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def test_port_from_config(self): app = MagicMock() app.conf = {'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl'} # We need to mock cassandra since it might not be installed or we don't want to connect import celery.backends.cassandra celery.backends.cassandra.cassandra = MagicMock() backend = CassandraBackend(app=app) print(f"Expected: 61003, Actual: {backend.port}") self.assertEqual(backend.port, 61003) def test_port_from_arg(self): app = MagicMock() app.conf = {'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl'} import celery.backends.cassandra celery.backends.cassandra.cassandra = MagicMock() backend = CassandraBackend(app=app, port=7000) print(f"Expected: 7000, Actual: {backend.port}") self.assertEqual(backend.port, 7000) def test_port_default(self): app = MagicMock() app.conf = {'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl'} import celery.backends.cassandra celery.backends.cassandra.cassandra = MagicMock() backend = CassandraBackend(app=app) print(f"Expected: 9042, Actual: {backend.port}") self.assertEqual(backend.port, 9042) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 628 tokens · stopped: STOP
Ah, `app.conf` is expected to be an object with attributes, not a dictionary.
I should use a `MagicMock` for `conf` as well.

Ah, `app.conf` is expected to be an object with attributes, not a dictionary. I should use a `MagicMock` for `conf` as well. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock import celery.backends.cassandra from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def setUp(self): # Mock the cassandra module to avoid import errors or connection attempts celery.backends.cassandra.cassandra = MagicMock() def test_port_from_config(self): app = MagicMock() conf = MagicMock() conf.get.side_effect = lambda key, default=None: { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', }.get(key, default) app.conf = conf backend = CassandraBackend(app=app) print(f"Test Port from Config - Expected: 61003, Actual: {backend.port}") self.assertEqual(backend.port, 61003) def test_port_from_arg(self): app = MagicMock() conf = MagicMock() conf.get.side_effect = lambda key, default=None: { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', }.get(key, default) app.conf = conf backend = CassandraBackend(app=app, port=7000) print(f"Test Port from Arg - Expected: 7000, Actual: {backend.port}") self.assertEqual(backend.port, 7000) def test_port_default(self): app = MagicMock() conf = MagicMock() conf.get.side_effect = lambda key, default=None: { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', }.get(key, default) app.conf = conf backend = CassandraBackend(app=app) print(f"Test Port Default - Expected: 9042, Actual: {backend.port}") self.assertEqual(backend.port, 9042) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 639 tokens · stopped: STOP
The `BaseBackend.__init__` is trying to access `conf.result_serializer` and lookup the encoder.
I need to make sure `conf.result_serializer` returns a valid serializer name (e.g., `'json'`).

The `BaseBackend.__init__` is trying to access `conf.result_serializer` and lookup the encoder. I need to make sure `conf.result_serializer` returns a valid serializer name (e.g., `'json'`). <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock import celery.backends.cassandra from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def setUp(self): # Mock the cassandra module to avoid import errors or connection attempts celery.backends.cassandra.cassandra = MagicMock() def _create_backend(self, conf_dict, port=None): app = MagicMock() conf = MagicMock() # Set default result_serializer to 'json' to satisfy BaseBackend conf.result_serializer = 'json' conf.get.side_effect = lambda key, default=None: conf_dict.get(key, default) app.conf = conf return CassandraBackend(app=app, port=port) def test_port_from_config(self): conf_dict = { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', } backend = self._create_backend(conf_dict) print(f"Test Port from Config - Expected: 61003, Actual: {backend.port}") self.assertEqual(backend.port, 61003) def test_port_from_arg(self): conf_dict = { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', } backend = self._create_backend(conf_dict, port=7000) print(f"Test Port from Arg - Expected: 7000, Actual: {backend.port}") self.assertEqual(backend.port, 7000) def test_port_default(self): conf_dict = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', } backend = self._create_backend(conf_dict) print(f"Test Port Default - Expected: 9042, Actual: {backend.port}") self.assertEqual(backend.port, 9042) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 725 tokens · stopped: STOP
Wait, `test_port_from_config` passed, and `test_port_from_arg` passed.
But `test_port_default` failed: `Expected: 9042, Actual: None`.

Let's look at the current code in `celery/backends/cassandra.py`:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
Wait, if `port` is `9042` and `conf.get('cassandra_port', None)` is `None`, then `self.port` should be `9042`.

Wait, if `port=9042` by default in `__init__`, why did my test get `None`?
Let's re-read the test and the output.
`Test Port Default - Expected: 9042, Actual: None`

Ah! I see what happened. In my test, I called `CassandraBackend(app=app)`.
Wait, if I call `CassandraBackend(app=app)`, the arguments are:
`servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None`
Then `self.port = 9042 or conf.get('cassandra_port', None)`.
`9042` is truthy, so `self.port` should be `9042`.

Why did the test output `Actual: None`?
Let me check the file content again. I read it earlier.
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', None)
```
Wait, let me read the file again, maybe I misread it or it changed? No, I only read it.

Wait, I might have misread the traceback of the previous failure.
No, it says `AssertionError: None != 9042`.

Let me re-run the reproduction script and print `backend.port` and `port` inside `__init__` if I can, or just double check everything.
Actually, maybe `port` was passed as `None` explicitly by the test? No.
`backend = self._create_backend(conf_dict)` where `_create_backend` calls `CassandraBackend(app=app)`.

Wait, I used `MagicMock` for `app` and `conf`.
Is it possible that `CassandraBackend` is not the one I think it is?
Wait, I imported it: `from celery.backends.cassandra import CassandraBackend`.

Let me print the code of `CassandraBackend.__init__` just to be sure.
Wait, `test_port_from_config` passed, and `test_port_from_arg` passed. But `test_port_default` failed: `Expected: 9042, Actual: None`. Let's look at the current code in `celery/backends/cassandra.py`: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port', None) ``` Wait, if `port` is `9042` and `conf.get('cassandra_port', None)` is `None`, then `self.port` should be `9042`. Wait, if `port=9042` by default in `__init__`, why did my test get `None`? Let's re-read the test and the output. `Test Port Default - Expected: 9042, Actual: None` Ah! I see what happened. In my test, I called `CassandraBackend(app=app)`. Wait, if I call `CassandraBackend(app=app)`, the arguments are: `servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None` Then `self.port = 9042 or conf.get('cassandra_port', None)`. `9042` is truthy, so `self.port` should be `9042`. Why did the test output `Actual: None`? Let me check the file content again. I read it earlier. ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port', None) ``` Wait, let me read the file again, maybe I misread it or it changed? No, I only read it. Wait, I might have misread the traceback of the previous failure. No, it says `AssertionError: None != 9042`. Let me re-run the reproduction script and print `backend.port` and `port` inside `__init__` if I can, or just double check everything. Actually, maybe `port` was passed as `None` explicitly by the test? No. `backend = self._create_backend(conf_dict)` where `_create_backend` calls `CassandraBackend(app=app)`. Wait, I used `MagicMock` for `app` and `conf`. Is it possible that `CassandraBackend` is not the one I think it is? Wait, I imported it: `from celery.backends.cassandra import CassandraBackend`. Let me print the code of `CassandraBackend.__init__` just to be sure.<channel|><|tool_call>call:run_command{command:<|"|>grep -n "def __init__" celery/backends/cassandra.py -A 20<|"|>}<tool_call|><|tool_response>
Generated tokens 1,115 tokens · stopped: STOP
Wait, the `grep` shows:
```python
88:    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
89-                 port=9042, bundle_path=None, **kwargs):
```
And `self.port = port or conf.get('cassandra_port', None)` at line 99.

If `port` is `9042`, then `self.port` must be `9042`.
Why did my test say `None`?

Let me look at my test again:
```python
    def _create_backend(self, conf_dict, port=None):
        app = MagicMock()
        conf = MagicMock()
        # Set default result_serializer to 'json' to satisfy BaseBackend
        conf.result_serializer = 'json'
        conf.get.side_effect = lambda key, default=None: conf_dict.get(key, default)
        app.conf = conf
        return CassandraBackend(app=app, port=port)
```
Aha!!!
In `_create_backend`, I have `port=None` as a default argument.
And I call `CassandraBackend(app=app, port=port)`.
If I call `self._create_backend(conf_dict)`, then `port` is `None`.
So I call `CassandraBackend(app=app, port=None)`.
Inside `CassandraBackend.__init__`, `port` is now `None` (overriding the default `9042`).
Then `self.port = None or conf.get('cassandra_port', None)`.
If `cassandra_port` is not in `conf_dict`, then `self.port` becomes `None`.

That's why `test_port_default` failed!
And `test_port_from_config` passed because `cassandra_port` was in `conf_dict`.
And `test_port_from_arg` passed because I passed `port=7000` to `_create_backend`, which then passed `port=7000` to `CassandraBackend`.

So my test actually proved that the current implementation does NOT use `9042` as a default if `port=None` is passed. But in Celery, the backend is usually instantiated with only `app` (and maybe some other args), and the `port` should be picked up from config or default to `9042`.

If the user sets `cassandra_port` in the config, it is ignored because `port` defaults to `9042`.
My `test_port_from_config` passed, but wait, did it?
```python
    def test_port_from_config(self):
        conf_dict = {
            'cassandra_port': 61003,
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'ks',
            'cassandra_table': 'tbl',
        }
        backend = self._create_backend(conf_dict)
```
`_create_backend(conf_dict)` calls `CassandraBackend(app=app, port=None)`.
Then `self.port = None or conf.get('cassandra_port', None)` which is `61003`.
So `test_port_from_config` passed only because I passed `port=None` to `CassandraBackend`!

If I don't pass `port=None`, and just let it use the default `9042`, then `test_port_from_config` would fail.

Let's verify this.
Wait, the `grep` shows: ```python 88: def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, 89- port=9042, bundle_path=None, **kwargs): ``` And `self.port = port or conf.get('cassandra_port', None)` at line 99. If `port` is `9042`, then `self.port` must be `9042`. Why did my test say `None`? Let me look at my test again: ```python def _create_backend(self, conf_dict, port=None): app = MagicMock() conf = MagicMock() # Set default result_serializer to 'json' to satisfy BaseBackend conf.result_serializer = 'json' conf.get.side_effect = lambda key, default=None: conf_dict.get(key, default) app.conf = conf return CassandraBackend(app=app, port=port) ``` Aha!!! In `_create_backend`, I have `port=None` as a default argument. And I call `CassandraBackend(app=app, port=port)`. If I call `self._create_backend(conf_dict)`, then `port` is `None`. So I call `CassandraBackend(app=app, port=None)`. Inside `CassandraBackend.__init__`, `port` is now `None` (overriding the default `9042`). Then `self.port = None or conf.get('cassandra_port', None)`. If `cassandra_port` is not in `conf_dict`, then `self.port` becomes `None`. That's why `test_port_default` failed! And `test_port_from_config` passed because `cassandra_port` was in `conf_dict`. And `test_port_from_arg` passed because I passed `port=7000` to `_create_backend`, which then passed `port=7000` to `CassandraBackend`. So my test actually proved that the current implementation does NOT use `9042` as a default if `port=None` is passed. But in Celery, the backend is usually instantiated with only `app` (and maybe some other args), and the `port` should be picked up from config or default to `9042`. If the user sets `cassandra_port` in the config, it is ignored because `port` defaults to `9042`. My `test_port_from_config` passed, but wait, did it? ```python def test_port_from_config(self): conf_dict = { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', } backend = self._create_backend(conf_dict) ``` `_create_backend(conf_dict)` calls `CassandraBackend(app=app, port=None)`. Then `self.port = None or conf.get('cassandra_port', None)` which is `61003`. So `test_port_from_config` passed only because I passed `port=None` to `CassandraBackend`! If I don't pass `port=None`, and just let it use the default `9042`, then `test_port_from_config` would fail. Let's verify this. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock import celery.backends.cassandra from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def setUp(self): celery.backends.cassandra.cassandra = MagicMock() def test_port_from_config_fail(self): app = MagicMock() conf = MagicMock() conf.result_serializer = 'json' conf.get.side_effect = lambda key, default=None: { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', }.get(key, default) app.conf = conf # Instantiate WITHOUT passing port, let it use the default 9042 backend = CassandraBackend(app=app) print(f"Expected: 61003, Actual: {backend.port}") self.assertEqual(backend.port, 61003) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 1,188 tokens · stopped: STOP
Yes! That confirms it. `9042` took precedence over `61003`.

Now I can fix it.
I will change the `__init__` signature to `port=None` and the assignment to:
`self.port = port or conf.get('cassandra_port') or 9042`

Wait, what if `port` is `0`? `0` is falsy. But port `0` is rarely used.
Usually we use `port is not None`.

Let's be precise.
The priority should be:
1. `port` argument (if provided)
2. `conf.get('cassandra_port')` (if provided)
3. `9042` (default)

So:
```python
        self.port = port if port is not None else conf.get('cassandra_port') or 9042
```
Wait, if `conf.get('cassandra_port')` returns `None`, then `None or 9042` is `9042`.
If `conf.get('cassandra_port')` returns `61003`, then `61003 or 9042` is `61003`.

Wait, what if `cassandra_port` is `0`? It's unlikely but `port or 9042` would make it `9042`.
Using `port is not None` for the argument is safer.
For the config, usually `conf.get` returns `None` if not set.

Let's check how others do it in `celery/backends/cassandra.py`.
```python
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get('cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)
        self.table = table or conf.get('cassandra_table', None)
```
They all use `or`. For servers, keyspace, table, they probably don't care about `0` or `""`. For port, it's an integer.

If I change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port') or 9042
```
This is simple and consistent with the surrounding code.
Let's verify if `port=0` is a thing. In most networking code, port 0 is special.

Actually, the best way to handle defaults in Celery is often:
`self.port = port if port is not None else conf.get('cassandra_port', 9042)`
But the `conf.get` second argument is the default.

Let's see:
If `port` is `None`:
- `conf.get('cassandra_port', 9042)` returns `cassandra_port` if present, else `9042`.
If `port` is `7000`:
- `port` is used.

Wait, if `cassandra_port` is present in config and set to `None` explicitly? (unlikely).

The proposed fix in the context was:
"priority to the passed port argument, followed by the cassandra_port configuration value, and finally fall back to 9042 as the ultimate default."

Implementation:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port') or 9042
```

Wait, if `port` is `None` and `conf.get('cassandra_port')` is `None`, it becomes `9042`.
If `port` is `None` and `conf.get('cassandra_port')` is `61003`, it becomes `61003`.
If `port` is `7000`, it becomes `7000`.

This seems correct and fits the Celery style.

Let's double check the line numbers.
Line 89: `port=9042, bundle_path=None, **kwargs):`
Line 99: `self.port = port or conf.get('cassandra_port', None)`

I will change line 89 and line 99.

Wait, I should also check if `port` is used anywhere else before it's assigned to `self.port`.
No, it's only used at line 99.

Let's apply the fix.

Yes! That confirms it. `9042` took precedence over `61003`. Now I can fix it. I will change the `__init__` signature to `port=None` and the assignment to: `self.port = port or conf.get('cassandra_port') or 9042` Wait, what if `port` is `0`? `0` is falsy. But port `0` is rarely used. Usually we use `port is not None`. Let's be precise. The priority should be: 1. `port` argument (if provided) 2. `conf.get('cassandra_port')` (if provided) 3. `9042` (default) So: ```python self.port = port if port is not None else conf.get('cassandra_port') or 9042 ``` Wait, if `conf.get('cassandra_port')` returns `None`, then `None or 9042` is `9042`. If `conf.get('cassandra_port')` returns `61003`, then `61003 or 9042` is `61003`. Wait, what if `cassandra_port` is `0`? It's unlikely but `port or 9042` would make it `9042`. Using `port is not None` for the argument is safer. For the config, usually `conf.get` returns `None` if not set. Let's check how others do it in `celery/backends/cassandra.py`. ```python self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get('cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', None) self.keyspace = keyspace or conf.get('cassandra_keyspace', None) self.table = table or conf.get('cassandra_table', None) ``` They all use `or`. For servers, keyspace, table, they probably don't care about `0` or `""`. For port, it's an integer. If I change it to: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port') or 9042 ``` This is simple and consistent with the surrounding code. Let's verify if `port=0` is a thing. In most networking code, port 0 is special. Actually, the best way to handle defaults in Celery is often: `self.port = port if port is not None else conf.get('cassandra_port', 9042)` But the `conf.get` second argument is the default. Let's see: If `port` is `None`: - `conf.get('cassandra_port', 9042)` returns `cassandra_port` if present, else `9042`. If `port` is `7000`: - `port` is used. Wait, if `cassandra_port` is present in config and set to `None` explicitly? (unlikely). The proposed fix in the context was: "priority to the passed port argument, followed by the cassandra_port configuration value, and finally fall back to 9042 as the ultimate default." Implementation: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port') or 9042 ``` Wait, if `port` is `None` and `conf.get('cassandra_port')` is `None`, it becomes `9042`. If `port` is `None` and `conf.get('cassandra_port')` is `61003`, it becomes `61003`. If `port` is `7000`, it becomes `7000`. This seems correct and fits the Celery style. Let's double check the line numbers. Line 89: `port=9042, bundle_path=None, **kwargs):` Line 99: `self.port = port or conf.get('cassandra_port', None)` I will change line 89 and line 99. Wait, I should also check if `port` is used anywhere else before it's assigned to `self.port`. No, it's only used at line 99. Let's apply the fix. <channel|><|tool_call>call:edit_file{filepath:<|"|>celery/backends/cassandra.py<|"|>,new_string:<|"|> port=None, bundle_path=None, **kwargs):<|"|>,old_string:<|"|> port=9042, bundle_path=None, **kwargs):<|"|>}<tool_call|><|tool_response>
Generated tokens 84 tokens · stopped: STOP
Now the second part of the fix.

Now the second part of the fix. <channel|><|tool_call>call:edit_file{filepath:<|"|>celery/backends/cassandra.py<|"|>,new_string:<|"|> self.port = port or conf.get('cassandra_port') or 9042<|"|>,old_string:<|"|> self.port = port or conf.get('cassandra_port', None)<|"|>}<tool_call|><|tool_response>
Generated tokens 912 tokens · stopped: STOP
Now I will run the reproduction tests again.
Now I will run the reproduction tests again.<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock import celery.backends.cassandra from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def setUp(self): # Mock the cassandra module to avoid import errors or connection attempts celery.backends.cassandra.cassandra = MagicMock() def _create_backend(self, conf_dict, port=None): app = MagicMock() conf = MagicMock() # Set default result_serializer to 'json' to satisfy BaseBackend conf.result_serializer = 'json' conf.get.side_effect = lambda key, default=None: conf_dict.get(key, default) app.conf = conf # Use kwargs to pass port exactly how it's passed in the real world # (or just call it directly) return CassandraBackend(app=app, port=port) def test_port_from_config(self): conf_dict = { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', } # Test without passing port argument (uses default None) backend = CassandraBackend(app=MagicMock(), port=None) # simulating no port passed # But wait, to simulate properly, I just instantiate it. # I'll redefine _create_backend loosely or just do it inline. pass def test_port_from_config_real(self): app = MagicMock() conf = MagicMock() conf.result_serializer = 'json' conf.get.side_effect = lambda key, default=None: { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', }.get(key, default) app.conf = conf backend = CassandraBackend(app=app) print(f"Test Port from Config - Expected: 61003, Actual: {backend.port}") self.assertEqual(backend.port, 61003) def test_port_from_arg_real(self): app = MagicMock() conf = MagicMock() conf.result_serializer = 'json' conf.get.side_effect = lambda key, default=None: { 'cassandra_port': 61003, 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', }.get(key, default) app.conf = conf backend = CassandraBackend(app=app, port=7000) print(f"Test Port from Arg - Expected: 7000, Actual: {backend.port}") self.assertEqual(backend.port, 7000) def test_port_default_real(self): app = MagicMock() conf = MagicMock() conf.result_serializer = 'json' conf.get.side_effect = lambda key, default=None: { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'ks', 'cassandra_table': 'tbl', }.get(key, default) app.conf = conf backend = CassandraBackend(app=app) print(f"Test Port Default - Expected: 9042, Actual: {backend.port}") self.assertEqual(backend.port, 9042) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 264 tokens · stopped: STOP
The error in `test_port_from_config` is just because I left an empty `pass` in there and it didn't really run the test logic but something went wrong with how I structured the class. Actually, `test_port_from_config` was calling `CassandraBackend(app=MagicMock(), port=None)` but didn't set up the `app.conf` properly.

The other three tests (`test_port_from_config_real`, `test_port_from_arg_real`, `test_port_default_real`) passed!

Stdout:
```
Test Port Default - Expected: 9042, Actual: 9042
Test Port from Arg - Expected: 7000, Actual: 7000
Test Port from Config - Expected: 61003, Actual: 61003
```

This proves the fix works.

Now let's just run all tests in `tests/` if there are any for Cassandra backend.
The error in `test_port_from_config` is just because I left an empty `pass` in there and it didn't really run the test logic but something went wrong with how I structured the class. Actually, `test_port_from_config` was calling `CassandraBackend(app=MagicMock(), port=None)` but didn't set up the `app.conf` properly. The other three tests (`test_port_from_config_real`, `test_port_from_arg_real`, `test_port_default_real`) passed! Stdout: ``` Test Port Default - Expected: 9042, Actual: 9042 Test Port from Arg - Expected: 7000, Actual: 7000 Test Port from Config - Expected: 61003, Actual: 61003 ``` This proves the fix works. Now let's just run all tests in `tests/` if there are any for Cassandra backend. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "Cassandra" tests/ | grep "test_*.py" | head -n 20<|"|>}<tool_call|><|tool_response>
Generated tokens 69 tokens · stopped: STOP
Wait, `tests/` directory not found? Let me check the workspace layout again.
Ah, the user said `Workspace Layout` but didn't provide it in the prompt.
Wait, I should have checked `ls -F`.

Wait, `tests/` directory not found? Let me check the workspace layout again. Ah, the user said `Workspace Layout` but didn't provide it in the prompt. Wait, I should have checked `ls -F`. <channel|><|tool_call>call:run_command{command:<|"|>ls -F<|"|>}<tool_call|><|tool_response>
Generated tokens 55 tokens · stopped: STOP
Ah, the tests are in `t/`, not `tests/`.

Ah, the tests are in `t/`, not `tests/`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "Cassandra" t/ | grep "test_*.py" | head -n 20<|"|>}<tool_call|><|tool_response>
Generated tokens 56 tokens · stopped: STOP
No tests for Cassandra backend in `t/`? That's surprising. Let me search for `CassandraBackend` in `t/`.


No tests for Cassandra backend in `t/`? That's surprising. Let me search for `CassandraBackend` in `t/`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "CassandraBackend" t/<|"|>}<tool_call|><|tool_response>
Generated tokens 62 tokens · stopped: STOP
Okay, they are in `t/unit/backends/test_cassandra.py`. Let's run them.


Okay, they are in `t/unit/backends/test_cassandra.py`. Let's run them. <channel|><|tool_call>call:run_command{command:<|"|>pytest t/unit/backends/test_cassandra.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Generated tokens 165 tokens · stopped: STOP
All tests passed.
I have:
1. Confirmed the bug with a reproduction script.
2. Fixed the bug by changing the default `port` to `None` and implementing a fallback priority: `port` arg -> `cassandra_port` config -> `9042`.
3. Verified the fix with the reproduction script.
4. Verified that existing tests for Cassandra backend still pass.
5. Verified there are no other parallel paths that need updating (Cassandra backend seems to be a single implementation).

I should double check if there are any other Cassandra related backends.
`grep -rn "Cassandra" celery/backends/`

All tests passed. I have: 1. Confirmed the bug with a reproduction script. 2. Fixed the bug by changing the default `port` to `None` and implementing a fallback priority: `port` arg -> `cassandra_port` config -> `9042`. 3. Verified the fix with the reproduction script. 4. Verified that existing tests for Cassandra backend still pass. 5. Verified there are no other parallel paths that need updating (Cassandra backend seems to be a single implementation). I should double check if there are any other Cassandra related backends. `grep -rn "Cassandra" celery/backends/` <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "Cassandra" celery/backends/<|"|>}<tool_call|><|tool_response>
Generated tokens 36 tokens · stopped: STOP
Only `celery/backends/cassandra.py` exists as a Cassandra backend.

I'm confident in the fix.
Only `celery/backends/cassandra.py` exists as a Cassandra backend. I'm confident in the fix.<channel|><|tool_call>call:get_status{}<tool_call|><|tool_response>
Generated tokens 28 tokens · stopped: STOP
Final check of the changes.
Final check of the changes.<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 22 tokens · stopped: STOP
The diff is clean and correct.
Final submission.
The diff is clean and correct. Final submission. <channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>

Patch, tests and logs

Final code change Included
diff --git a/celery/backends/cassandra.py b/celery/backends/cassandra.py
index 0eb37f3..ff7128b 100644
--- a/celery/backends/cassandra.py
+++ b/celery/backends/cassandra.py
@@ -86,7 +86,7 @@ class CassandraBackend(BaseBackend):
     supports_autoexpire = True      # autoexpire supported via entry_ttl
 
     def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
-                 port=9042, bundle_path=None, **kwargs):
+                 port=None, bundle_path=None, **kwargs):
         super().__init__(**kwargs)
 
         if not cassandra:
@@ -96,7 +96,7 @@ class CassandraBackend(BaseBackend):
         self.servers = servers or conf.get('cassandra_servers', None)
         self.bundle_path = bundle_path or conf.get(
             'cassandra_secure_bundle_path', None)
-        self.port = port or conf.get('cassandra_port', None)
+        self.port = port or conf.get('cassandra_port') or 9042
         self.keyspace = keyspace or conf.get('cassandra_keyspace', None)
         self.table = table or conf.get('cassandra_table', None)
         self.cassandra_options = conf.get('cassandra_options', {})
Test output Included
============================= test session starts ==============================
collected 12 items

t/unit/backends/test_cassandra.py ............                           [100%]

==================================== PASSES ====================================
- generated xml file: /tmp/rebench-grade-dfc36df743324c0b801e824230f1466d.xml --
=========================== short test summary info ============================
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_no_cassandra
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_with_and_without_LOCAL_QUROM
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_with_cloud
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_reduce
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_get_task_meta_for
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_as_uri
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_store_result
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_timeouting_cluster
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_create_result_table
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_session
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_auth_provider
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_options
============================== 12 passed in 0.06s ==============================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite name="pytest" errors="0" failures="0" skipped="0" tests="12" time="0.067" timestamp="2026-11-14T05:07:26.128547+00:00" hostname="11fa5cb0b7a3"><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_no_cassandra" time="0.009" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_with_and_without_LOCAL_QUROM" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_with_cloud" time="0.015" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_reduce" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_get_task_meta_for" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_as_uri" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_store_result" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_timeouting_cluster" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_create_result_table" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_session" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_auth_provider" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_options" time="0.001" /></testsuite></testsuites>
Agent log Included
  [   0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
  [   0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository celery/celery.
  [  18.0s] 💭 (513 chars) "The user is reporting that the `cassandra_port` configuration is not working for the 
Cassandra backend in Celery.
The lo..."
  [  18.0s] 🔧 run_command grep -rn --include="*.py" "cassandra_port" .
  [  18.1s]   → ./celery/backends/cassandra.py:99:        self.port = port or conf.get('cassandra_port', None)
  [  22.4s] 💭 (112 chars) "Okay, it's mentioned in `celery/backends/cassandra.py` at line 99.
Let's examine `celery/backends/cassandra.py`."
  [  22.4s] 📖 read_file (celery/backends/cassandra.py)
  [  22.5s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'content': '"""Apache Cassandra result 
store backend using …
  [  65.6s] 💭 (2068 chars) "The `__init__` method:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
       ..."
  [  65.6s] 📖 read_file (celery/backends/cassandra.py)
  [  65.7s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'content': '        try:\n            if 
self._session is n…
  [ 137.9s] 💭 (2278 chars) "The problem is definitely here:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None..."
  [ 137.9s] 🔧 run_command (40 lines) python3 - <<'PY'
  [ 138.4s]   → error (exit 0): 
  [ 165.5s] 💭 (124 chars) "Ah, `app.conf` is expected to be an object with attributes, not a dictionary.
I should use a `MagicMock` for `conf` as w..."
  [ 165.5s] 🔧 run_command (58 lines) python3 - <<'PY'
  [ 165.7s]   → error (exit 0): 
  [ 189.7s] 💭 (190 chars) "The `BaseBackend.__init__` is trying to access `conf.result_serializer` and lookup the 
encoder.
I need to make sure `con..."
  [ 189.7s] 🔧 run_command (55 lines) python3 - <<'PY'
  [ 189.9s]   → error (exit 0): 
  [ 226.4s] 💭 (2143 chars) "Wait, `test_port_from_config` passed, and `test_port_from_arg` passed.
But `test_port_default` failed: `Expected: 9042, ..."
  [ 226.4s] 🔧 run_command grep -n "def __init__" celery/backends/cassandra.py -A 20
  [ 226.4s]   → 88:    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
  [ 265.2s] 💭 (2589 chars) "Wait, the `grep` shows:
```python
88:    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
89-..."
  [ 265.2s] 🔧 run_command (30 lines) python3 - <<'PY'
  [ 265.3s]   → error (exit 0): 
  [ 327.7s] 💭 (3354 chars) "Yes! That confirms it. `9042` took precedence over `61003`.

Now I can fix it.
I will change the `__init__` signature to..."
  [ 327.7s] ✏️ edit_file (celery/backends/cassandra.py)
  [ 327.8s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'occurrences': 1, 'strategy': 'exact', 
'diff': '--- a/celer…
  [ 329.7s] 💭 (31 chars) "Now the second part of the fix."
  [ 329.7s] ✏️ edit_file (celery/backends/cassandra.py)
  [ 329.8s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'occurrences': 1, 'strategy': 'exact', 
'diff': "--- a/celer…
  [ 343.4s] 💭 (44 chars) "Now I will run the reproduction tests again."
  [ 343.4s] 🔧 run_command (85 lines) python3 - <<'PY'
  [ 343.5s]   → error (exit 0): 
  [ 350.0s] 💭 (714 chars) "The error in `test_port_from_config` is just because I left an empty `pass` in there and it 
didn't really run the test l..."
  [ 350.0s] 🔧 run_command grep -rn "Cassandra" tests/ | grep "test_*.py" | head -n 20
  [ 350.0s]   🔧 
  [ 351.7s] 💭 (187 chars) "Wait, `tests/` directory not found? Let me check the workspace layout again.
Ah, the user said `Workspace Layout` but di..."
  [ 351.7s] 🔧 run_command ls -F
  [ 351.7s]   → CONTRIBUTING.rst
  [ 352.7s] 💭 (40 chars) "Ah, the tests are in `t/`, not `tests/`."
  [ 352.7s] 🔧 run_command grep -rn "Cassandra" t/ | grep "test_*.py" | head -n 20
  [ 352.8s]   🔧 
  [ 354.1s] 💭 (104 chars) "No tests for Cassandra backend in `t/`? That's surprising. Let me search for 
`CassandraBackend` in `t/`."
  [ 354.1s] 🔧 run_command grep -rn "CassandraBackend" t/
  [ 354.1s]   → t/unit/backends/test_cassandra.py:19:class test_CassandraBackend:
  [ 355.4s] 💭 (70 chars) "Okay, they are in `t/unit/backends/test_cassandra.py`. Let's run them."
  [ 355.4s] 🔧 run_command pytest t/unit/backends/test_cassandra.py -q --tb=short --no-header
  [ 356.2s]   → ............                                                             [100%]
  [ 360.3s] 💭 (571 chars) "All tests passed.
I have:
1. Confirmed the bug with a reproduction script.
2. Fixed the bug by changing the default `por..."
  [ 360.3s] 🔧 run_command grep -rn "Cassandra" celery/backends/
  [ 360.3s]   → celery/backends/cassandra.py:1:"""Apache Cassandra result store backend using the DataStax driver."""
  [ 362.2s] 💭 (93 chars) "Only `celery/backends/cassandra.py` exists as a Cassandra backend.

I'm confident in the fix."
  [ 362.2s] 🤖 get_status
  [ 362.2s]   → get_status: {"status": "ok", "tool_calls_used": 17, "patch_submitted": false, "patch_size": 0, 
"tool_calls_remaining": 13, "max_tool_calls": 30, "time_seconds_rem...
  [ 362.8s] 💭 (27 chars) "Final check of the changes."
  [ 362.8s] 🔧 run_command git status --short && git diff
  [ 362.9s]   →  M celery/backends/cassandra.py
  [ 364.3s] 💭 (48 chars) "The diff is clean and correct.
Final submission."
  [ 364.3s] 🤖 submit_patch
  [ 364.4s]   → submit_patch: {"status": "ok", "patch_size": 1129, "files_changed": 1}
  [ 368.0s] 💭 (5 chars) "Done."
  [ 368.0s] ✅ Agent finished: The `cassandra_port` configuration was being ignored because the 
`CassandraBackend.__init__` method used a default value of `9042` for the `port` argument. Since `9042` is truthy, the 
expression `self...
Native result row
{
  "agent_error": null,
  "duration_seconds": 429.7,
  "error": null,
  "grade": {
    "collected_tests": 12,
    "competition_junit_ok": true,
    "error": null,
    "required_issues_count": 0,
    "resolved": true,
    "status_counts": {
      "PASSED": 12
    },
    "strict_clean_patch": true,
    "test_exit_code": 0
  },
  "instance_id": "celery__celery-9465",
  "pass_idx": 0,
  "patch_chars": 1129,
  "phase1_seconds": 428.07,
  "repo": "celery/celery",
  "request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/celery__celery-9465__p0__r7.jsonl",
  "resolved": true,
  "rollout_idx": 7,
  "run_key": "celery__celery-9465__p0__r7",
  "strict_clean_patch": true,
  "tool_calls": 18,
  "total_llm_calls": 21,
  "trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_celery__celery-9465__p0__r7.json"
}