GEMMA DEVELOPER AGENT
SAVED EVIDENCE
← 31B real rollouts · 480 (exact stack, 32 lanes, 13-Nov)
ROLLOUT 6 · celery/celery

celery__celery-9465

Not solved
396 stotal time
10tool calls
13model calls
7,163tokens generated
123,561prompt tokens read

Test failures/errors recorded in JUnit XML (failures=1, errors=0)

⚠ The request log has 12 model calls but the trace has 14 agent calls, so tokens are listed separately instead of beside each turn.

Turn by turn

Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.

System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`.
Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run.

## Critical Environment & Grader Rules
1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`.
2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files.
3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`.
4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks:
   `pytest path/to/test_file.py -k pattern -q --tb=short --no-header`
   If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off.
5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission.

## Execution Protocol

### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls)
- The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories.
- Run a single compound `run_command` with `grep -rn --include="*.py"` to locate:
  (a) the exact symbols, error strings, or functions from the problem description,
  (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and
  (c) the closest existing unit test files under `tests/`.

### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls)
- Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests.
- Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types.

### Phase 3 — Reproduce Bug in One Call (1 tool call)
- Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts.

### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls)
- Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`.
- Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests.
- **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`.

### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls)
- Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`.
- Run `git status --short && git diff` via `run_command`. Confirm:
  - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately),
  - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched),
  - Minimal, clean diff with valid imports and indentation.
- Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 8,012 characters
You are evaluating a software engineering task for repository celery/celery.

Problem Statement:
Config cassandra backend port config not work
## Checklist

- [ ] I have included the output of ``celery -A proj report`` in the issue.
      (if you are not able to do this, then at least specify the Celery
       version affected).
```
software -> celery:4.1.0 (latentcall) kombu:4.1.0 py:2.7.12
            billiard:3.5.0.3 py-amqp:2.2.2
platform -> system:Linux arch:64bit, ELF imp:CPython
loader   -> celery.loaders.app.AppLoader
settings -> transport:amqp results:cassandra

broker_url: u'amqp://guest:********@localhost:32781//'
cassandra_entry_ttl: 86400
cassandra_table: 'tasks_result'
cassandra_port: '61003'
cassandra_write_consistency: 'ONE'
cassandra_read_consistency: 'ONE'
include: [u'celery_for_medium.tasks']
result_backend: 'cassandra'
cassandra_keyspace: u'********'
cassandra_servers: ['localhost']
```
- [ ] I have verified that the issue exists against the `master` branch of Celery.

## Steps to reproduce

## Expected behavior
Result data should write correctly to cassandra database at: **localhost:61003**
## Actual behavior
```
[2018-12-07 14:28:17,815: ERROR/ForkPoolWorker-1] Control connection failed to connect, shutting down Cluster:
Traceback (most recent call last):
  File "cassandra/cluster.py", line 1301, in cassandra.cluster.Cluster.connect
    self.control_connection.connect()
  File "cassandra/cluster.py", line 2802, in cassandra.cluster.ControlConnection.connect
    self._set_new_connection(self._reconnect_internal())
  File "cassandra/cluster.py", line 2845, in cassandra.cluster.ControlConnection._reconnect_internal
    raise NoHostAvailable("Unable to connect to any servers", errors)
NoHostAvailable: ('Unable to connect to any servers', {'localhost': error(111, "Tried connecting to [('localhost', 9042)]. Last error: Connection refused")})
```


## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns

## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.

## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./CONTRIBUTING.rst
./CONTRIBUTORS.txt
./Changelog.rst
./LICENSE
./MANIFEST.in
./Makefile
./README.rst
./SECURITY.md
./TODO
./bandit.json
./celery
./celery/__init__.py
./celery/__main__.py
./celery/_state.py
./celery/app
./celery/app/__init__.py
./celery/app/amqp.py
./celery/app/annotations.py
./celery/app/autoretry.py
./celery/app/backends.py
./celery/app/base.py
./celery/app/builtins.py
./celery/app/control.py
./celery/app/defaults.py
./celery/app/events.py
./celery/app/log.py
./celery/app/registry.py
./celery/app/routes.py
./celery/app/task.py
./celery/app/trace.py
./celery/app/utils.py
./celery/apps
./celery/apps/__init__.py
./celery/apps/beat.py
./celery/apps/multi.py
./celery/apps/worker.py
./celery/backends
./celery/backends/__init__.py
./celery/backends/arangodb.py
./celery/backends/asynchronous.py
./celery/backends/azureblockblob.py
./celery/backends/base.py
./celery/backends/cache.py
./celery/backends/cassandra.py
./celery/backends/consul.py
./celery/backends/cosmosdbsql.py
./celery/backends/couchbase.py
./celery/backends/couchdb.py
./celery/backends/database
./celery/backends/dynamodb.py
./celery/backends/elasticsearch.py
./celery/backends/filesystem.py
./celery/backends/gcs.py
./celery/backends/mongodb.py
./celery/backends/redis.py
./celery/backends/rpc.py
./celery/backends/s3.py
./celery/beat.py
./celery/bin
./celery/bin/__init__.py
./celery/bin/amqp.py
./celery/bin/base.py
./celery/bin/beat.py
./celery/bin/call.py
./celery/bin/celery.py
./celery/bin/control.py
./celery/bin/events.py
./celery/bin/graph.py
./celery/bin/list.py
./celery/bin/logtool.py
./celery/bin/migrate.py
./celery/bin/multi.py
./celery/bin/purge.py
./celery/bin/result.py
./celery/bin/shell.py
./celery/bin/upgrade.py
./celery/bin/worker.py
./celery/bootsteps.py
./celery/canvas.py
./celery/concurrency
./celery/concurrency/__init__.py
./celery/concurrency/asynpool.py
./celery/concurrency/base.py
./celery/concurrency/eventlet.py
./celery/concurrency/gevent.py
./celery/concurrency/prefork.py
./celery/concurrency/solo.py
./celery/concurrency/thread.py
./celery/contrib
./celery/contrib/__init__.py
./celery/contrib/abortable.py
./celery/contrib/django
./celery/contrib/migrate.py
./celery/contrib/pytest.py
./celery/contrib/rdb.py
./celery/contrib/sphinx.py
./celery/contrib/testing
./celery/events
./celery/events/__init__.py
./celery/events/cursesmon.py
./celery/events/dispatcher.py
./celery/events/dumper.py
./celery/events/event.py
./celery/events/receiver.py
./celery/events/snapshot.py
./celery/events/state.py
./celery/exceptions.py
./celery/fixups
./celery/fixups/__init__.py
./celery/fixups/django.py
./celery/loaders
./celery/loaders/__init__.py
./celery/loaders/app.py
./celery/loaders/base.py
./celery/loaders/default.py
./celery/local.py
./celery/platforms.py
./celery/result.py
./celery/schedules.py
./celery/security
./celery/security/__init__.py
./celery/security/certificate.py
./celery/security/key.py
./celery/security/serialization.py
./celery/security/utils.py
./celery/signals.py
./celery/states.py
./celery/utils
./celery/utils/__init__.py
./celery/utils/abstract.py
./celery/utils/annotations.py
./celery/utils/collections.py
./celery/utils/debug.py
./celery/utils/deprecated.py
./celery/utils/dispatch
./celery/utils/functional.py
./celery/utils/graph.py
./celery/utils/imports.py
./celery/utils/iso8601.py
./celery/utils/log.py
./celery/utils/nodenames.py
./celery/utils/objects.py
./celery/utils/quorum_queues.py
./celery/utils/saferepr.py
./celery/utils/serialization.py
./celery/utils/static
./celery/utils/sysinfo.py
./celery/utils/term.py
./celery/utils/text.py
./celery/utils/threads.py
./celery/utils/time.py
./celery/utils/timer2.py
./celery/worker
./docker
./docker/Dockerfile
./docker/docker-compose.yml
./docker/docs
./docker/entrypoint
./docker/scripts
./docs
./examples
./extra
./extra/WindowsCMD-AzureWebJob
./extra/bash-completion
./extra/generic-init.d
./extra/macOS
./extra/release
./extra/supervisord
./extra/systemd
./extra/zsh-completion
./helm-chart
./helm-chart/Chart.yaml
./helm-chart/README.rst
./helm-chart/templates
./helm-chart/values.yaml
./pyproject.toml
./requirements
./requirements/README.rst
./requirements/default.txt
./requirements/deps
./requirements/dev.txt
./requirements/docs.txt
./requirements/extras
./requirements/pkgutils.txt
./requirements/security.txt
./requirements/test-ci-base.txt
./requirements/test-ci-default.txt
./requirements/test-integration.txt
./requirements/test-pypy3.txt
./requirements/test.txt
./setup.cfg
./setup.py
./t
./t/__init__.py
./t/benchmarks
./t/integration
./t/skip.py
./t/smoke
./t/unit
./tox.ini
```
Turn 1at 89 s229 tokens out4,734 prompt tokens
The user is reporting that the `cassandra_port` configuration is not working when using the Cassandra backend for Celery results.
The error message shows that it's trying to connect to `localhost:9042` (the default Cassandra port) instead of the configured `61003`.

Looking at the workspace layout, the Cassandra backend implementation should be in `celery/backends/cassandra.py`.

I need to check if `cassandra_port` is being used when initializing the Cassandra cluster.

Plan:
1. Search for `cassandra_port` in `celery/backends/cassandra.py`.
2. Examine how the Cassandra cluster is initialized.
3. Create a reproduction script (though I might not be able to run a real Cassandra instance, I can mock it to see if the port is passed correctly).
4. Fix the code to use `cassandra_port`.
5. Verify the fix.
TOOL CALL · run_command
{
  "command": "grep -rn --include=\"*.py\" \"cassandra_port\" ."
}
Result of run_command 156 characters
{
  "status": "ok",
  "stdout": "./celery/backends/cassandra.py:99:        self.port = port or conf.get('cassandra_port', None)\n",
  "stderr": "",
  "exit_code": 0
}
Turn 2at 93 s71 tokens out5,032 prompt tokens
Okay, `cassandra_port` is mentioned in `celery/backends/cassandra.py` at line 99.
Let's read the content of `celery/backends/cassandra.py` around that line.
TOOL CALL · read_file
{
  "filepath": "celery/backends/cassandra.py"
}
Result of read_file 5,164 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "content": "\"\"\"Apache Cassandra result store backend using the DataStax driver.\"\"\"\nimport threading\n\nfrom celery import states\nfrom celery.exceptions import ImproperlyConfigured\nfrom celery.utils.log import get_logger\n\nfrom .base import BaseBackend\n\ntry:  # pragma: no cover\n    import cassandra\n    import cassandra.auth\n    import cassandra.cluster\n    import cassandra.query\nexcept ImportError:\n    cassandra = None\n\n\n__all__ = ('CassandraBackend',)\n\nlogger = get_logger(__name__)\n\nE_NO_CASSANDRA = \"\"\"\nYou need to install the cassandra-driver library to\nuse the Cassandra backend.  See https://github.com/datastax/python-driver\n\"\"\"\n\nE_NO_SUCH_CASSANDRA_AUTH_PROVIDER = \"\"\"\nCASSANDRA_AUTH_PROVIDER you provided is not a valid auth_provider class.\nSee https://datastax.github.io/python-driver/api/cassandra/auth.html.\n\"\"\"\n\nE_CASSANDRA_MISCONFIGURED = 'Cassandra backend improperly configured.'\n\nE_CASSANDRA_NOT_CONFIGURED = 'Cassandra backend not configured.'\n\nQ_INSERT_RESULT = \"\"\"\nINSERT INTO {table} (\n    task_id, status, result, date_done, traceback, children) VALUES (\n        %s, %s, %s, %s, %s, %s) {expires};\n\"\"\"\n\nQ_SELECT_RESULT = \"\"\"\nSELECT status, result, date_done, traceback, children\nFROM {table}\nWHERE task_id=%s\nLIMIT 1\n\"\"\"\n\nQ_CREATE_RESULT_TABLE = \"\"\"\nCREATE TABLE {table} (\n    task_id text,\n    status text,\n    result blob,\n    date_done timestamp,\n    traceback blob,\n    children blob,\n    PRIMARY KEY ((task_id), date_done)\n) WITH CLUSTERING ORDER BY (date_done DESC);\n\"\"\"\n\nQ_EXPIRES = \"\"\"\n    USING TTL {0}\n\"\"\"\n\n\ndef buf_t(x):\n    return bytes(x, 'utf8')\n\n\nclass CassandraBackend(BaseBackend):\n    \"\"\"Cassandra/AstraDB backend utilizing DataStax driver.\n\n    Raises:\n        celery.exceptions.ImproperlyConfigured:\n            if module :pypi:`cassandra-driver` is not available,\n            or not-exactly-one of the :setting:`cassandra_servers` and\n            the :setting:`cassandra_secure_bundle_path` settings is set.\n    \"\"\"\n\n    #: List of Cassandra servers with format: ``hostname``.\n    servers = None\n    #: Location of the secure connect bundle zipfile (absolute path).\n    bundle_path = None\n\n    supports_autoexpire = True      # autoexpire supported via entry_ttl\n\n    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n                 port=9042, bundle_path=None, **kwargs):\n        super().__init__(**kwargs)\n\n        if not cassandra:\n            raise ImproperlyConfigured(E_NO_CASSANDRA)\n\n        conf = self.app.conf\n        self.servers = servers or conf.get('cassandra_servers', None)\n        self.bundle_path = bundle_path or conf.get(\n            'cassandra_secure_bundle_path', None)\n        self.port = port or conf.get('cassandra_port', None)\n        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n        self.table = table or conf.get('cassandra_table', None)\n        self.cassandra_options = conf.get('cassandra_options', {})\n\n        # either servers or bundle path must be provided...\n        db_directions = self.servers or self.bundle_path\n        if not db_directions or not self.keyspace or not self.table:\n            raise ImproperlyConfigured(E_CASSANDRA_NOT_CONFIGURED)\n        # ...but not both:\n        if self.servers and self.bundle_path:\n            raise ImproperlyConfigured(E_CASSANDRA_MISCONFIGURED)\n\n        expires = entry_ttl or conf.get('cassandra_entry_ttl', None)\n\n        self.cqlexpires = (\n            Q_EXPIRES.format(expires) if expires is not None else '')\n\n        read_cons = conf.get('cassandra_read_consistency') or 'LOCAL_QUORUM'\n        write_cons = conf.get('cassandra_write_consistency') or 'LOCAL_QUORUM'\n\n        self.read_consistency = getattr(\n            cassandra.ConsistencyLevel, read_cons,\n            cassandra.ConsistencyLevel.LOCAL_QUORUM)\n        self.write_consistency = getattr(\n            cassandra.ConsistencyLevel, write_cons,\n            cassandra.ConsistencyLevel.LOCAL_QUORUM)\n\n        self.auth_provider = None\n        auth_provider = conf.get('cassandra_auth_provider', None)\n        auth_kwargs = conf.get('cassandra_auth_kwargs', None)\n        if auth_provider and auth_kwargs:\n            auth_provider_class = getattr(cassandra.auth, auth_provider, None)\n            if not auth_provider_class:\n                raise ImproperlyConfigured(E_NO_SUCH_CASSANDRA_AUTH_PROVIDER)\n            self.auth_provider = auth_provider_class(**auth_kwargs)\n\n        self._cluster = None\n        self._session = None\n        self._write_stmt = None\n        self._read_stmt = None\n        self._lock = threading.RLock()\n\n    def _get_connection(self, write=False):\n        \"\"\"Prepare the connection for action.\n\n        Arguments:\n            write (bool): are we a writer?\n        \"\"\"\n        if self._session is not None:\n            return\n        self._lock.acquire()",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 256,
  "is_truncated": true
}
Turn 3at 98 s49 tokens out6,653 prompt tokens
I need to see the rest of the `_get_connection` method.
TOOL CALL · read_file
{
  "filepath": "celery/backends/cassandra.py",
  "start_line\"": 151
}
Result of read_file 5,164 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "content": "\"\"\"Apache Cassandra result store backend using the DataStax driver.\"\"\"\nimport threading\n\nfrom celery import states\nfrom celery.exceptions import ImproperlyConfigured\nfrom celery.utils.log import get_logger\n\nfrom .base import BaseBackend\n\ntry:  # pragma: no cover\n    import cassandra\n    import cassandra.auth\n    import cassandra.cluster\n    import cassandra.query\nexcept ImportError:\n    cassandra = None\n\n\n__all__ = ('CassandraBackend',)\n\nlogger = get_logger(__name__)\n\nE_NO_CASSANDRA = \"\"\"\nYou need to install the cassandra-driver library to\nuse the Cassandra backend.  See https://github.com/datastax/python-driver\n\"\"\"\n\nE_NO_SUCH_CASSANDRA_AUTH_PROVIDER = \"\"\"\nCASSANDRA_AUTH_PROVIDER you provided is not a valid auth_provider class.\nSee https://datastax.github.io/python-driver/api/cassandra/auth.html.\n\"\"\"\n\nE_CASSANDRA_MISCONFIGURED = 'Cassandra backend improperly configured.'\n\nE_CASSANDRA_NOT_CONFIGURED = 'Cassandra backend not configured.'\n\nQ_INSERT_RESULT = \"\"\"\nINSERT INTO {table} (\n    task_id, status, result, date_done, traceback, children) VALUES (\n        %s, %s, %s, %s, %s, %s) {expires};\n\"\"\"\n\nQ_SELECT_RESULT = \"\"\"\nSELECT status, result, date_done, traceback, children\nFROM {table}\nWHERE task_id=%s\nLIMIT 1\n\"\"\"\n\nQ_CREATE_RESULT_TABLE = \"\"\"\nCREATE TABLE {table} (\n    task_id text,\n    status text,\n    result blob,\n    date_done timestamp,\n    traceback blob,\n    children blob,\n    PRIMARY KEY ((task_id), date_done)\n) WITH CLUSTERING ORDER BY (date_done DESC);\n\"\"\"\n\nQ_EXPIRES = \"\"\"\n    USING TTL {0}\n\"\"\"\n\n\ndef buf_t(x):\n    return bytes(x, 'utf8')\n\n\nclass CassandraBackend(BaseBackend):\n    \"\"\"Cassandra/AstraDB backend utilizing DataStax driver.\n\n    Raises:\n        celery.exceptions.ImproperlyConfigured:\n            if module :pypi:`cassandra-driver` is not available,\n            or not-exactly-one of the :setting:`cassandra_servers` and\n            the :setting:`cassandra_secure_bundle_path` settings is set.\n    \"\"\"\n\n    #: List of Cassandra servers with format: ``hostname``.\n    servers = None\n    #: Location of the secure connect bundle zipfile (absolute path).\n    bundle_path = None\n\n    supports_autoexpire = True      # autoexpire supported via entry_ttl\n\n    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n                 port=9042, bundle_path=None, **kwargs):\n        super().__init__(**kwargs)\n\n        if not cassandra:\n            raise ImproperlyConfigured(E_NO_CASSANDRA)\n\n        conf = self.app.conf\n        self.servers = servers or conf.get('cassandra_servers', None)\n        self.bundle_path = bundle_path or conf.get(\n            'cassandra_secure_bundle_path', None)\n        self.port = port or conf.get('cassandra_port', None)\n        self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n        self.table = table or conf.get('cassandra_table', None)\n        self.cassandra_options = conf.get('cassandra_options', {})\n\n        # either servers or bundle path must be provided...\n        db_directions = self.servers or self.bundle_path\n        if not db_directions or not self.keyspace or not self.table:\n            raise ImproperlyConfigured(E_CASSANDRA_NOT_CONFIGURED)\n        # ...but not both:\n        if self.servers and self.bundle_path:\n            raise ImproperlyConfigured(E_CASSANDRA_MISCONFIGURED)\n\n        expires = entry_ttl or conf.get('cassandra_entry_ttl', None)\n\n        self.cqlexpires = (\n            Q_EXPIRES.format(expires) if expires is not None else '')\n\n        read_cons = conf.get('cassandra_read_consistency') or 'LOCAL_QUORUM'\n        write_cons = conf.get('cassandra_write_consistency') or 'LOCAL_QUORUM'\n\n        self.read_consistency = getattr(\n            cassandra.ConsistencyLevel, read_cons,\n            cassandra.ConsistencyLevel.LOCAL_QUORUM)\n        self.write_consistency = getattr(\n            cassandra.ConsistencyLevel, write_cons,\n            cassandra.ConsistencyLevel.LOCAL_QUORUM)\n\n        self.auth_provider = None\n        auth_provider = conf.get('cassandra_auth_provider', None)\n        auth_kwargs = conf.get('cassandra_auth_kwargs', None)\n        if auth_provider and auth_kwargs:\n            auth_provider_class = getattr(cassandra.auth, auth_provider, None)\n            if not auth_provider_class:\n                raise ImproperlyConfigured(E_NO_SUCH_CASSANDRA_AUTH_PROVIDER)\n            self.auth_provider = auth_provider_class(**auth_kwargs)\n\n        self._cluster = None\n        self._session = None\n        self._write_stmt = None\n        self._read_stmt = None\n        self._lock = threading.RLock()\n\n    def _get_connection(self, write=False):\n        \"\"\"Prepare the connection for action.\n\n        Arguments:\n            write (bool): are we a writer?\n        \"\"\"\n        if self._session is not None:\n            return\n        self._lock.acquire()",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 256,
  "is_truncated": true
}
Turn 4at 119 s249 tokens out8,250 prompt tokens
I made a mistake in `read_file` and it returned the first 150 lines again because I didn't specify `end_line` and might have had some confusion. No, actually it seems I requested `start_line=151` but I didn't get the lines I expected. Wait, looking at the output, it's exactly the same content as before.

Ah, I see. The `read_file` output shows it returned lines 1 to 150 again.

Wait, I tried:
`read_file(filepath="celery/backends/cassandra.py", start_line=151)`
The response shows:
`"start_line": 1, "end_line": 150, "total_lines": 256, "is_truncated": true`

This is strange. Let me try again with `start_line=151` and a specific `end_line`.
TOOL CALL · read_file
{
  "end_line": 256,
  "filepath": "celery/backends/cassandra.py",
  "start_line": 151
}
Result of read_file 4,467 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "content": "        try:\n            if self._session is not None:\n                return\n            # using either 'servers' or 'bundle_path' here:\n            if self.servers:\n                self._cluster = cassandra.cluster.Cluster(\n                    self.servers, port=self.port,\n                    auth_provider=self.auth_provider,\n                    **self.cassandra_options)\n            else:\n                # 'bundle_path' is guaranteed to be set\n                self._cluster = cassandra.cluster.Cluster(\n                    cloud={\n                        'secure_connect_bundle': self.bundle_path,\n                    },\n                    auth_provider=self.auth_provider,\n                    **self.cassandra_options)\n            self._session = self._cluster.connect(self.keyspace)\n\n            # We're forced to do concatenation below, as formatting would\n            # blow up on superficial %s that'll be processed by Cassandra\n            self._write_stmt = cassandra.query.SimpleStatement(\n                Q_INSERT_RESULT.format(\n                    table=self.table, expires=self.cqlexpires),\n            )\n            self._write_stmt.consistency_level = self.write_consistency\n\n            self._read_stmt = cassandra.query.SimpleStatement(\n                Q_SELECT_RESULT.format(table=self.table),\n            )\n            self._read_stmt.consistency_level = self.read_consistency\n\n            if write:\n                # Only possible writers \"workers\" are allowed to issue\n                # CREATE TABLE.  This is to prevent conflicting situations\n                # where both task-creator and task-executor would issue it\n                # at the same time.\n\n                # Anyway; if you're doing anything critical, you should\n                # have created this table in advance, in which case\n                # this query will be a no-op (AlreadyExists)\n                make_stmt = cassandra.query.SimpleStatement(\n                    Q_CREATE_RESULT_TABLE.format(table=self.table),\n                )\n                make_stmt.consistency_level = self.write_consistency\n\n                try:\n                    self._session.execute(make_stmt)\n                except cassandra.AlreadyExists:\n                    pass\n\n        except cassandra.OperationTimedOut:\n            # a heavily loaded or gone Cassandra cluster failed to respond.\n            # leave this class in a consistent state\n            if self._cluster is not None:\n                self._cluster.shutdown()     # also shuts down _session\n\n            self._cluster = None\n            self._session = None\n            raise   # we did fail after all - reraise\n        finally:\n            self._lock.release()\n\n    def _store_result(self, task_id, result, state,\n                      traceback=None, request=None, **kwargs):\n        \"\"\"Store return value and state of an executed task.\"\"\"\n        self._get_connection(write=True)\n\n        self._session.execute(self._write_stmt, (\n            task_id,\n            state,\n            buf_t(self.encode(result)),\n            self.app.now(),\n            buf_t(self.encode(traceback)),\n            buf_t(self.encode(self.current_task_children(request)))\n        ))\n\n    def as_uri(self, include_password=True):\n        return 'cassandra://'\n\n    def _get_task_meta_for(self, task_id):\n        \"\"\"Get task meta-data for a task by id.\"\"\"\n        self._get_connection()\n\n        res = self._session.execute(self._read_stmt, (task_id, )).one()\n        if not res:\n            return {'status': states.PENDING, 'result': None}\n\n        status, result, date_done, traceback, children = res\n\n        return self.meta_from_decoded({\n            'task_id': task_id,\n            'status': status,\n            'result': self.decode(result),\n            'date_done': date_done,\n            'traceback': self.decode(traceback),\n            'children': self.decode(children),\n        })\n\n    def __reduce__(self, args=(), kwargs=None):\n        kwargs = {} if not kwargs else kwargs\n        kwargs.update(\n            {'servers': self.servers,\n             'keyspace': self.keyspace,\n             'table': self.table})\n        return super().__reduce__(args, kwargs)",
  "start_line": 151,
  "end_line": 256,
  "total_lines": 256,
  "is_truncated": false
}
Turn 5at 276 s3,098 tokens out9,641 prompt tokens
Wait, I see the code:
```python
            if self.servers:
                self._cluster = cassandra.cluster.Cluster(
                    self.servers, port=self.port,
                    auth_provider=self.auth_provider,
                    **self.cassandra_options)
```
And in `__init__`:
```python
        self.port = port or conf.get('cassandra_port', None)
```

Wait, `port` has a default value of `9042` in `__init__`:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
```

Wait, if `port` is passed as `9042` to `__init__`, then:
`self.port = port or conf.get('cassandra_port', None)`
Since `port` is `9042` (which is truthy), `self.port` becomes `9042`, and `conf.get('cassandra_port', None)` is never evaluated!

If the user provides `cassandra_port` in the config, they want that to be used instead of the default `9042`.

So the bug is in the `__init__` method's handling of `port`.

```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
```

If `port` is the default `9042`, `self.port` becomes `9042`, ignoring `cassandra_port`.

It should probably be:
```python
        self.port = conf.get('cassandra_port', port)
```
Or something similar.

Wait, if `port` is passed as an argument to `__init__`, it should probably take precedence over the config.

If `port` is `None`, it should use the config. But `port` has a default of `9042`.

Let's check how other parameters are handled:
`self.servers = servers or conf.get('cassandra_servers', None)`
`self.bundle_path = bundle_path or conf.get('cassandra_secure_bundle_path', None)`

Wait, these also have the same pattern. If `servers` is provided, it uses it, otherwise it uses the config.
But `port` has a default value of `9042`.

If I call `CassandraBackend(port=1234)`, it uses `1234`.
If I call `CassandraBackend()`, it uses `9042` as the default `port` argument, and then `self.port = 9042 or conf.get('cassandra_port', None)`, which is `9042`.

The fix should be to change the default value of `port` to `None` in `__init__`, and then handle the default `9042` later.

Or change the `self.port` assignment.

Let's see:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
```

If we change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
```
Then `self.port = port or conf.get('cassandra_port', None)` will work if either `port` or `cassandra_port` is provided.
But then if neither is provided, `self.port` will be `None`.
Will `cassandra.cluster.Cluster(self.servers, port=None, ...)` use the default port?
According to DataStax driver documentation, if `port` is not specified, it defaults to 9042.

So changing the default value of `port` to `None` seems correct.

Let's verify the DataStax driver behavior. Actually, I don't have access to the internet, but usually, driver defaults are handled within the driver.

Wait, if I change `port=9042` to `port=None`, then:
`self.port = port or conf.get('cassandra_port', None)`
If both are `None`, `self.port` is `None`.
Then `cassandra.cluster.Cluster(self.servers, port=self.port, ...)` is called as `cassandra.cluster.Cluster(self.servers, port=None, ...)`

If the driver's `Cluster` class handles `port=None` by using 9042, we are good.

Let's check if there's a better way.
Maybe:
```python
        self.port = port if port is not None else conf.get('cassandra_port', 9042)
```
Wait, the current code is:
`self.port = port or conf.get('cassandra_port', None)`

If `port` is `9042`, this is always `9042`.

If I change it to:
```python
        self.port = conf.get('cassandra_port', port)
```
Then if `cassandra_port` is in config, it's used. If not, `port` (default 9042) is used.
But if `CassandraBackend` is instantiated with a specific `port` argument, that `port` argument is ignored if `cassandra_port` is in config. That seems acceptable and consistent with how Celery usually handles config vs arguments.

Actually, let's see.
If the user does `CassandraBackend(port=1234)`, they probably want to override everything.
The current pattern for `servers` is:
`self.servers = servers or conf.get('cassandra_servers', None)`
If `servers` is provided, it's used.

So for `port`, it should be:
`self.port = port if port is not None else conf.get('cassandra_port', 9042)`
But `port` is already `9042` by default in the signature.

Let's try this:
1. Change `port=9042` to `port=None` in the `__init__` signature.
2. Use `self.port = port or conf.get('cassandra_port', 9042)`.

Wait, if `port` is `None` in signature:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', 9042)
```
This looks correct. If `port` is passed, use it. Otherwise use `cassandra_port` from config. Otherwise use `9042`.

Let's see if I can reproduce this.
I can't run a Cassandra server, but I can mock `cassandra.cluster.Cluster`.

Reproduction script:
```python
import unittest
from unittest.mock import MagicMock, patch

# Mock the cassandra module
import sys
mock_cassandra = MagicMock()
sys.modules['cassandra'] = mock_cassandra
sys.modules['cassandra.cluster'] = mock_cassandra.cluster
sys.modules['cassandra.auth'] = mock_cassandra.auth
sys.modules['cassandra.query'] = mock_cassandra.query

from celery.backends.cassandra import CassandraBackend

class TestCassandraBackendPort(unittest.TestCase):
    def test_port_config_used(self):
        # Mock app and conf
        mock_app = MagicMock()
        mock_app.conf = {
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'test_keyspace',
            'cassandra_table': 'test_table',
            'cassandra_port': 61003,
        }
        
        backend = CassandraBackend(app=mock_app)
        self.assertEqual(backend.port, 61003)
        
        # Trigger connection to see if it's passed to Cluster
        backend._get_connection()
        mock_cassandra.cluster.Cluster.assert_called_with(
            ['localhost'], port=61003,
            auth_provider=None,
            **{}
        )

    def test_port_arg_used(self):
        mock_app = MagicMock()
        mock_app.conf = {
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'test_keyspace',
            'cassandra_table': 'test_table',
            'cassandra_port': 61003,
        }
        
        backend = CassandraBackend(app=mock_app, port=1234)
        self.assertEqual(backend.port, 1234)
        
        backend._get_connection()
        mock_cassandra.cluster.Cluster.assert_called_with(
            ['localhost'], port=1234,
            auth_provider=None,
            **{}
        )

    def test_default_port_used(self):
        mock_app = MagicMock()
        mock_app.conf = {
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'test_keyspace',
            'cassandra_table': 'test_table',
            # cassandra_port is NOT set
        }
        
        backend = CassandraBackend(app=mock_app)
        self.assertEqual(backend.port, 9042)
        
        backend._get_connection()
        mock_cassandra.cluster.Cluster.assert_called_with(
            ['localhost'], port=9042,
            auth_provider=None,
            **{}
        )
```

Let's run this.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock, patch\nimport sys\n\n# Mock the cassandra module\nmock_cassandra = MagicMock()\nsys.modules['cassandra'] = mock_cassandra\nsys.modules['cassandra.cluster'] = mock_cassandra.cluster\nsys.modules['cassandra.auth'] = mock_cassandra.auth\nsys.modules['cassandra.query'] = mock_cassandra.query\n\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def test_port_config_used(self):\n        # Mock app and conf\n        mock_app = MagicMock()\n        mock_app.conf = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n            'cassandra_port': 61003,\n        }\n        \n        # Use a dict-like object for conf if needed, but a dict should work for .get()\n        backend = CassandraBackend(app=mock_app)\n        self.assertEqual(backend.port, 61003)\n        \n        # Trigger connection to see if it's passed to Cluster\n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=61003,\n            auth_provider=None,\n            **{}\n        )\n\n    def test_port_arg_used(self):\n        mock_app = MagicMock()\n        mock_app.conf = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n            'cassandra_port': 61003,\n        }\n        \n        backend = CassandraBackend(app=mock_app, port=1234)\n        self.assertEqual(backend.port, 1234)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=1234,\n            auth_provider=None,\n            **{}\n        )\n\n    def test_default_port_used(self):\n        mock_app = MagicMock()\n        mock_app.conf = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n        }\n        \n        backend = CassandraBackend(app=mock_app)\n        self.assertEqual(backend.port, 9042)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=9042,\n            auth_provider=None,\n            **{}\n        )\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 4,003 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "EEE\n======================================================================\nERROR: test_default_port_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 64, in test_default_port_used\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_arg_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 46, in test_port_arg_used\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_config_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 26, in test_port_config_used\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n----------------------------------------------------------------------\nRan 3 tests in 0.001s\n\nFAILED (errors=3)\n",
  "details": {
    "stdout": "",
    "stderr": "EEE\n======================================================================\nERROR: test_default_port_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 64, in test_default_port_used\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_arg_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 46, in test_port_arg_used\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n======================================================================\nERROR: test_port_config_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 26, in test_port_config_used\n  File \"/workspace/celery/backends/cassandra.py\", line 90, in __init__\n    super().__init__(**kwargs)\n  File \"/workspace/celery/backends/base.py\", line 116, in __init__\n    self.serializer = serializer or conf.result_serializer\nAttributeError: 'dict' object has no attribute 'result_serializer'\n\n----------------------------------------------------------------------\nRan 3 tests in 0.001s\n\nFAILED (errors=3)\n",
    "exit_code": 1
  }
}
Turn 6at 306 s867 tokens out13,810 prompt tokens
The error is because `mock_app.conf` is a `dict`, and `BaseBackend.__init__` expects it to be an object with attributes (like `conf.result_serializer`).

I should use a `MagicMock` for `conf` as well.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock, patch\nimport sys\n\n# Mock the cassandra module\nmock_cassandra = MagicMock()\nsys.modules['cassandra'] = mock_cassandra\nsys.modules['cassandra.cluster'] = mock_cassandra.cluster\nsys.modules['cassandra.auth'] = mock_cassandra.auth\nsys.modules['cassandra.query'] = mock_cassandra.query\n\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def setup_app(self, conf_data):\n        mock_app = MagicMock()\n        mock_conf = MagicMock()\n        # Support both .get() and attribute access\n        mock_conf.get.side_effect = lambda key, default=None: conf_data.get(key, default)\n        for k, v in conf_data.items():\n            setattr(mock_conf, k, v)\n        # Add default for result_serializer\n        if 'result_serializer' not in conf_data:\n            mock_conf.result_serializer = 'json'\n        \n        mock_app.conf = mock_conf\n        return mock_app\n\n    def test_port_config_used(self):\n        conf_data = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n            'cassandra_port': 61003,\n        }\n        mock_app = self.setup_app(conf_data)\n        backend = CassandraBackend(app=mock_app)\n        self.assertEqual(backend.port, 61003)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=61003,\n            auth_provider=None,\n            **{}\n        )\n\n    def test_port_arg_used(self):\n        conf_data = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n            'cassandra_port': 61003,\n        }\n        mock_app = self.setup_app(conf_data)\n        backend = CassandraBackend(app=mock_app, port=1234)\n        self.assertEqual(backend.port, 1234)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=1234,\n            auth_provider=None,\n            **{}\n        )\n\n    def test_default_port_used(self):\n        conf_data = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n        }\n        mock_app = self.setup_app(conf_data)\n        backend = CassandraBackend(app=mock_app)\n        self.assertEqual(backend.port, 9042)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=9042,\n            auth_provider=None,\n            **{}\n        )\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 1,039 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "..F\n======================================================================\nFAIL: test_port_config_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 38, in test_port_config_used\nAssertionError: 9042 != 61003\n\n----------------------------------------------------------------------\nRan 3 tests in 0.004s\n\nFAILED (failures=1)\n",
  "details": {
    "stdout": "",
    "stderr": "..F\n======================================================================\nFAIL: test_port_config_used (__main__.TestCassandraBackendPort)\n----------------------------------------------------------------------\nTraceback (most recent call last):\n  File \"<stdin>\", line 38, in test_port_config_used\nAssertionError: 9042 != 61003\n\n----------------------------------------------------------------------\nRan 3 tests in 0.004s\n\nFAILED (failures=1)\n",
    "exit_code": 1
  }
}
Turn 7at 334 s961 tokens out14,966 prompt tokens
Perfect! The reproduction script failed exactly as expected. `test_port_config_used` failed because `backend.port` stayed `9042` instead of using the `61003` from the config.

Now let's implement the fix.
I'll change the `__init__` signature to have `port=None` and then handle the default in the assignment.

Wait, let's check the `__init__` line again.

```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
```

I will change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', 9042)
```

Wait, if I do `self.port = port or conf.get('cassandra_port', 9042)`, and `port` is `None`, and `cassandra_port` is `None`, then `self.port` is `9042`. This is correct.
If `port` is provided (e.g., `1234`), then `self.port` is `1234`. This is correct.
If `port` is `None` and `cassandra_port` is `61003`, then `self.port` is `61003`. This is correct.

Wait, one detail. What if `port` is passed as `0`? Unlikely for a port, but `0 or something` is `something`. In the case of ports, `0` is not a valid port we'd expect here.

Let's apply this change.
TOOL CALL · edit_file
{
  "def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n                 port=9042, bundle_path=None, **kwargs)": "super().__init__(**kwargs)\n\n        if not cassandra:\n            raise ImproperlyConfigured(E_NO_CASSANDRA)\n\n        conf = self.app.conf\n        self.servers = servers or conf.get('cassandra_servers'",
  "filepath": "celery/backends/cassandra.py",
  "new_string": "    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n                 port=None, bundle_path=None, **kwargs):\n        super().__init__(**kwargs)\n\n        if not cassandra:\n            raise ImproperlyConfigured(E_NO_CASSANDRA)\n\n        conf = self.app.conf\n        self.servers = servers or conf.get('cassandra_servers', None)\n        self.bundle_path = bundle_path or conf.get(\n            'cassandra_secure_bundle_path', None)\n        self.port = port or conf.get('cassandra_port', 9042)`,old_string:"
}
Result of edit_file 220 characters
{
  "error": "Invoking `edit_file()` failed as the following mandatory input parameters are not present:\nold_string\nYou could retry calling this tool, but it is IMPORTANT for you to provide all the mandatory parameters."
}
Turn 8at 365 s354 tokens out8,611 prompt tokens
My apologies, I messed up the `edit_file` arguments.
TOOL CALL · edit_file
{
  "filepath": "celery/backends/cassandra.py",
  "new_string": "    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n                 port=None, bundle_path=None, **kwargs):\n        super().__init__(**kwargs)\n\n        if not cassandra:\n            raise ImproperlyConfigured(E_NO_CASSANDRA)\n\n        conf = self.app.conf\n        self.servers = servers or conf.get('cassandra_servers', None)\n        self.bundle_path = bundle_path or conf.get(\n            'cassandra_secure_bundle_path', None)\n        self.port = port or conf.get('cassandra_port', 9042)",
  "old_string": "    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n                 port=9042, bundle_path=None, **kwargs):\n        super().__init__(**kwargs)\n\n        if not cassandra:\n            raise ImproperlyConfigured(E_NO_CASSANDRA)\n\n        conf = self.app.conf\n        self.servers = servers or conf.get('cassandra_servers', None)\n        self.bundle_path = bundle_path or conf.get(\n            'cassandra_secure_bundle_path', None)\n        self.port = port or conf.get('cassandra_port', None)"
}
Result of edit_file 1,104 characters
{
  "status": "ok",
  "filepath": "celery/backends/cassandra.py",
  "occurrences": 1,
  "strategy": "exact",
  "diff": "--- a/celery/backends/cassandra.py\n+++ b/celery/backends/cassandra.py\n@@ -86,7 +86,7 @@\n     supports_autoexpire = True      # autoexpire supported via entry_ttl\n \n     def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n-                 port=9042, bundle_path=None, **kwargs):\n+                 port=None, bundle_path=None, **kwargs):\n         super().__init__(**kwargs)\n \n         if not cassandra:\n@@ -96,7 +96,7 @@\n         self.servers = servers or conf.get('cassandra_servers', None)\n         self.bundle_path = bundle_path or conf.get(\n             'cassandra_secure_bundle_path', None)\n-        self.port = port or conf.get('cassandra_port', None)\n+        self.port = port or conf.get('cassandra_port', 9042)\n         self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n         self.table = table or conf.get('cassandra_table', None)\n         self.cassandra_options = conf.get('cassandra_options', {})\n",
  "is_truncated": false
}
Turn 9at 377 s823 tokens out9,325 prompt tokens
Now let's run the reproduction script again to verify the fix.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport unittest\nfrom unittest.mock import MagicMock, patch\nimport sys\n\n# Mock the cassandra module\nmock_cassandra = MagicMock()\nsys.modules['cassandra'] = mock_cassandra\nsys.modules['cassandra.cluster'] = mock_cassandra.cluster\nsys.modules['cassandra.auth'] = mock_cassandra.auth\nsys.modules['cassandra.query'] = mock_cassandra.query\n\nfrom celery.backends.cassandra import CassandraBackend\n\nclass TestCassandraBackendPort(unittest.TestCase):\n    def setup_app(self, conf_data):\n        mock_app = MagicMock()\n        mock_conf = MagicMock()\n        # Support both .get() and attribute access\n        mock_conf.get.side_effect = lambda key, default=None: conf_data.get(key, default)\n        for k, v in conf_data.items():\n            setattr(mock_conf, k, v)\n        # Add default for result_serializer\n        if 'result_serializer' not in conf_data:\n            mock_conf.result_serializer = 'json'\n        \n        mock_app.conf = mock_conf\n        return mock_app\n\n    def test_port_config_used(self):\n        conf_data = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n            'cassandra_port': 61003,\n        }\n        mock_app = self.setup_app(conf_data)\n        backend = CassandraBackend(app=mock_app)\n        self.assertEqual(backend.port, 61003)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=61003,\n            auth_provider=None,\n            **{}\n        )\n\n    def test_port_arg_used(self):\n        conf_data = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n            'cassandra_port': 61003,\n        }\n        mock_app = self.setup_app(conf_data)\n        backend = CassandraBackend(app=mock_app, port=1234)\n        self.assertEqual(backend.port, 1234)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=1234,\n            auth_provider=None,\n            **{}\n        )\n\n    def test_default_port_used(self):\n        conf_data = {\n            'cassandra_servers': ['localhost'],\n            'cassandra_keyspace': 'test_keyspace',\n            'cassandra_table': 'test_table',\n        }\n        mock_app = self.setup_app(conf_data)\n        backend = CassandraBackend(app=mock_app)\n        self.assertEqual(backend.port, 9042)\n        \n        backend._get_connection()\n        mock_cassandra.cluster.Cluster.assert_called_with(\n            ['localhost'], port=9042,\n            auth_provider=None,\n            **{}\n        )\n\nif __name__ == '__main__':\n    unittest.main()\nPY\n"
}
Result of run_command 166 characters
{
  "status": "ok",
  "stdout": "",
  "stderr": "...\n----------------------------------------------------------------------\nRan 3 tests in 0.004s\n\nOK\n",
  "exit_code": 0
}
Turn 10at 383 s152 tokens out10,215 prompt tokens
The tests passed! I have verified that:
1. `cassandra_port` in the configuration is now used when no `port` argument is provided.
2. The `port` argument still takes precedence over the configuration.
3. The default port `9042` is used if neither is provided.

Finally, let's check if there are any other files that need similar fixes. I only searched for `cassandra_port` in `celery/backends/cassandra.py`.

Let's double check if there are any other Cassandra-related backends.
TOOL CALL · run_command
{
  "command": "grep -rn --include=\"*.py\" \"cassandra_port\" ."
}
Result of run_command 156 characters
{
  "status": "ok",
  "stdout": "./celery/backends/cassandra.py:99:        self.port = port or conf.get('cassandra_port', 9042)\n",
  "stderr": "",
  "exit_code": 0
}
Turn 11at 385 s62 tokens out10,439 prompt tokens
Only one occurrence, and that's the one I fixed.

I'm confident in the fix. I'll do a final check of `git status` and `git diff`.
TOOL CALL · run_command
{
  "command": "git status --short && git diff"
}
Result of run_command 1,242 characters
{
  "status": "ok",
  "stdout": " M celery/backends/cassandra.py\ndiff --git a/celery/backends/cassandra.py b/celery/backends/cassandra.py\nindex 0eb37f3..3c8d129 100644\n--- a/celery/backends/cassandra.py\n+++ b/celery/backends/cassandra.py\n@@ -86,7 +86,7 @@ class CassandraBackend(BaseBackend):\n     supports_autoexpire = True      # autoexpire supported via entry_ttl\n \n     def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,\n-                 port=9042, bundle_path=None, **kwargs):\n+                 port=None, bundle_path=None, **kwargs):\n         super().__init__(**kwargs)\n \n         if not cassandra:\n@@ -96,7 +96,7 @@ class CassandraBackend(BaseBackend):\n         self.servers = servers or conf.get('cassandra_servers', None)\n         self.bundle_path = bundle_path or conf.get(\n             'cassandra_secure_bundle_path', None)\n-        self.port = port or conf.get('cassandra_port', None)\n+        self.port = port or conf.get('cassandra_port', 9042)\n         self.keyspace = keyspace or conf.get('cassandra_keyspace', None)\n         self.table = table or conf.get('cassandra_table', None)\n         self.cassandra_options = conf.get('cassandra_options', {})\n",
  "stderr": "",
  "exit_code": 0
}
Turn 12at 386 s23 tokens out10,911 prompt tokens
The diff looks clean. I'm ready to submit.
TOOL CALL · submit_patch
Result of submit_patch 56 characters
{
  "status": "ok",
  "patch_size": 1127,
  "files_changed": 1
}
Turn 13at 392 s225 tokens out10,974 prompt tokens
The issue was that the `CassandraBackend.__init__` method had a default `port=9042` in its signature, which caused the `self.port = port or conf.get('cassandra_port', None)` statement to always use `9042` if no `port` argument was explicitly passed, ignoring the `cassandra_port` configuration setting. I fixed this by changing the default `port` in the signature to `None` and setting the default value to `9042` within the `conf.get` call.
Turn 14at 392 s
The `cassandra_port` configuration was being ignored because the `CassandraBackend.__init__` method used a default value of `9042` for the `port` parameter, which took precedence over the configuration setting. I updated the `__init__` signature to use `port=None` as the default and modified the assignment of `self.port` to use `conf.get('cassandra_port', 9042)`, ensuring that the configuration is respected while maintaining the default port.

Model calls (not matched to turns)

Generated tokens 229 tokens · stopped: STOP
The user is reporting that the `cassandra_port` configuration is not working when using the Cassandra backend for Celery results.
The error message shows that it's trying to connect to `localhost:9042` (the default Cassandra port) instead of the configured `61003`.

Looking at the workspace layout, the Cassandra backend implementation should be in `celery/backends/cassandra.py`.

I need to check if `cassandra_port` is being used when initializing the Cassandra cluster.

Plan:
1. Search for `cassandra_port` in `celery/backends/cassandra.py`.
2. Examine how the Cassandra cluster is initialized.
3. Create a reproduction script (though I might not be able to run a real Cassandra instance, I can mock it to see if the port is passed correctly).
4. Fix the code to use `cassandra_port`.
5. Verify the fix.
<|channel>thought The user is reporting that the `cassandra_port` configuration is not working when using the Cassandra backend for Celery results. The error message shows that it's trying to connect to `localhost:9042` (the default Cassandra port) instead of the configured `61003`. Looking at the workspace layout, the Cassandra backend implementation should be in `celery/backends/cassandra.py`. I need to check if `cassandra_port` is being used when initializing the Cassandra cluster. Plan: 1. Search for `cassandra_port` in `celery/backends/cassandra.py`. 2. Examine how the Cassandra cluster is initialized. 3. Create a reproduction script (though I might not be able to run a real Cassandra instance, I can mock it to see if the port is passed correctly). 4. Fix the code to use `cassandra_port`. 5. Verify the fix.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "cassandra_port" .<|"|>}<tool_call|><|tool_response>
Generated tokens 71 tokens · stopped: STOP
Okay, `cassandra_port` is mentioned in `celery/backends/cassandra.py` at line 99.
Let's read the content of `celery/backends/cassandra.py` around that line.
Okay, `cassandra_port` is mentioned in `celery/backends/cassandra.py` at line 99. Let's read the content of `celery/backends/cassandra.py` around that line.<channel|><|tool_call>call:read_file{filepath:<|"|>celery/backends/cassandra.py<|"|>}<tool_call|><|tool_response>
Generated tokens 49 tokens · stopped: STOP
I need to see the rest of the `_get_connection` method.
I need to see the rest of the `_get_connection` method. <channel|><|tool_call>call:read_file{filepath:<|"|>celery/backends/cassandra.py<|"|>,start_line": 151}<tool_call|><|tool_response>
Generated tokens 249 tokens · stopped: STOP
I made a mistake in `read_file` and it returned the first 150 lines again because I didn't specify `end_line` and might have had some confusion. No, actually it seems I requested `start_line=151` but I didn't get the lines I expected. Wait, looking at the output, it's exactly the same content as before.

Ah, I see. The `read_file` output shows it returned lines 1 to 150 again.

Wait, I tried:
`read_file(filepath="celery/backends/cassandra.py", start_line=151)`
The response shows:
`"start_line": 1, "end_line": 150, "total_lines": 256, "is_truncated": true`

This is strange. Let me try again with `start_line=151` and a specific `end_line`.
I made a mistake in `read_file` and it returned the first 150 lines again because I didn't specify `end_line` and might have had some confusion. No, actually it seems I requested `start_line=151` but I didn't get the lines I expected. Wait, looking at the output, it's exactly the same content as before. Ah, I see. The `read_file` output shows it returned lines 1 to 150 again. Wait, I tried: `read_file(filepath="celery/backends/cassandra.py", start_line=151)` The response shows: `"start_line": 1, "end_line": 150, "total_lines": 256, "is_truncated": true` This is strange. Let me try again with `start_line=151` and a specific `end_line`. <channel|><|tool_call>call:read_file{end_line:256,filepath:<|"|>celery/backends/cassandra.py<|"|>,start_line:151}<tool_call|><|tool_response>
Generated tokens 3,098 tokens · stopped: STOP
Wait, I see the code:
```python
            if self.servers:
                self._cluster = cassandra.cluster.Cluster(
                    self.servers, port=self.port,
                    auth_provider=self.auth_provider,
                    **self.cassandra_options)
```
And in `__init__`:
```python
        self.port = port or conf.get('cassandra_port', None)
```

Wait, `port` has a default value of `9042` in `__init__`:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
```

Wait, if `port` is passed as `9042` to `__init__`, then:
`self.port = port or conf.get('cassandra_port', None)`
Since `port` is `9042` (which is truthy), `self.port` becomes `9042`, and `conf.get('cassandra_port', None)` is never evaluated!

If the user provides `cassandra_port` in the config, they want that to be used instead of the default `9042`.

So the bug is in the `__init__` method's handling of `port`.

```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
```

If `port` is the default `9042`, `self.port` becomes `9042`, ignoring `cassandra_port`.

It should probably be:
```python
        self.port = conf.get('cassandra_port', port)
```
Or something similar.

Wait, if `port` is passed as an argument to `__init__`, it should probably take precedence over the config.

If `port` is `None`, it should use the config. But `port` has a default of `9042`.

Let's check how other parameters are handled:
`self.servers = servers or conf.get('cassandra_servers', None)`
`self.bundle_path = bundle_path or conf.get('cassandra_secure_bundle_path', None)`

Wait, these also have the same pattern. If `servers` is provided, it uses it, otherwise it uses the config.
But `port` has a default value of `9042`.

If I call `CassandraBackend(port=1234)`, it uses `1234`.
If I call `CassandraBackend()`, it uses `9042` as the default `port` argument, and then `self.port = 9042 or conf.get('cassandra_port', None)`, which is `9042`.

The fix should be to change the default value of `port` to `None` in `__init__`, and then handle the default `9042` later.

Or change the `self.port` assignment.

Let's see:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
```

If we change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
```
Then `self.port = port or conf.get('cassandra_port', None)` will work if either `port` or `cassandra_port` is provided.
But then if neither is provided, `self.port` will be `None`.
Will `cassandra.cluster.Cluster(self.servers, port=None, ...)` use the default port?
According to DataStax driver documentation, if `port` is not specified, it defaults to 9042.

So changing the default value of `port` to `None` seems correct.

Let's verify the DataStax driver behavior. Actually, I don't have access to the internet, but usually, driver defaults are handled within the driver.

Wait, if I change `port=9042` to `port=None`, then:
`self.port = port or conf.get('cassandra_port', None)`
If both are `None`, `self.port` is `None`.
Then `cassandra.cluster.Cluster(self.servers, port=self.port, ...)` is called as `cassandra.cluster.Cluster(self.servers, port=None, ...)`

If the driver's `Cluster` class handles `port=None` by using 9042, we are good.

Let's check if there's a better way.
Maybe:
```python
        self.port = port if port is not None else conf.get('cassandra_port', 9042)
```
Wait, the current code is:
`self.port = port or conf.get('cassandra_port', None)`

If `port` is `9042`, this is always `9042`.

If I change it to:
```python
        self.port = conf.get('cassandra_port', port)
```
Then if `cassandra_port` is in config, it's used. If not, `port` (default 9042) is used.
But if `CassandraBackend` is instantiated with a specific `port` argument, that `port` argument is ignored if `cassandra_port` is in config. That seems acceptable and consistent with how Celery usually handles config vs arguments.

Actually, let's see.
If the user does `CassandraBackend(port=1234)`, they probably want to override everything.
The current pattern for `servers` is:
`self.servers = servers or conf.get('cassandra_servers', None)`
If `servers` is provided, it's used.

So for `port`, it should be:
`self.port = port if port is not None else conf.get('cassandra_port', 9042)`
But `port` is already `9042` by default in the signature.

Let's try this:
1. Change `port=9042` to `port=None` in the `__init__` signature.
2. Use `self.port = port or conf.get('cassandra_port', 9042)`.

Wait, if `port` is `None` in signature:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        # ...
        self.port = port or conf.get('cassandra_port', 9042)
```
This looks correct. If `port` is passed, use it. Otherwise use `cassandra_port` from config. Otherwise use `9042`.

Let's see if I can reproduce this.
I can't run a Cassandra server, but I can mock `cassandra.cluster.Cluster`.

Reproduction script:
```python
import unittest
from unittest.mock import MagicMock, patch

# Mock the cassandra module
import sys
mock_cassandra = MagicMock()
sys.modules['cassandra'] = mock_cassandra
sys.modules['cassandra.cluster'] = mock_cassandra.cluster
sys.modules['cassandra.auth'] = mock_cassandra.auth
sys.modules['cassandra.query'] = mock_cassandra.query

from celery.backends.cassandra import CassandraBackend

class TestCassandraBackendPort(unittest.TestCase):
    def test_port_config_used(self):
        # Mock app and conf
        mock_app = MagicMock()
        mock_app.conf = {
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'test_keyspace',
            'cassandra_table': 'test_table',
            'cassandra_port': 61003,
        }
        
        backend = CassandraBackend(app=mock_app)
        self.assertEqual(backend.port, 61003)
        
        # Trigger connection to see if it's passed to Cluster
        backend._get_connection()
        mock_cassandra.cluster.Cluster.assert_called_with(
            ['localhost'], port=61003,
            auth_provider=None,
            **{}
        )

    def test_port_arg_used(self):
        mock_app = MagicMock()
        mock_app.conf = {
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'test_keyspace',
            'cassandra_table': 'test_table',
            'cassandra_port': 61003,
        }
        
        backend = CassandraBackend(app=mock_app, port=1234)
        self.assertEqual(backend.port, 1234)
        
        backend._get_connection()
        mock_cassandra.cluster.Cluster.assert_called_with(
            ['localhost'], port=1234,
            auth_provider=None,
            **{}
        )

    def test_default_port_used(self):
        mock_app = MagicMock()
        mock_app.conf = {
            'cassandra_servers': ['localhost'],
            'cassandra_keyspace': 'test_keyspace',
            'cassandra_table': 'test_table',
            # cassandra_port is NOT set
        }
        
        backend = CassandraBackend(app=mock_app)
        self.assertEqual(backend.port, 9042)
        
        backend._get_connection()
        mock_cassandra.cluster.Cluster.assert_called_with(
            ['localhost'], port=9042,
            auth_provider=None,
            **{}
        )
```

Let's run this.
Wait, I see the code: ```python if self.servers: self._cluster = cassandra.cluster.Cluster( self.servers, port=self.port, auth_provider=self.auth_provider, **self.cassandra_options) ``` And in `__init__`: ```python self.port = port or conf.get('cassandra_port', None) ``` Wait, `port` has a default value of `9042` in `__init__`: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): ``` Wait, if `port` is passed as `9042` to `__init__`, then: `self.port = port or conf.get('cassandra_port', None)` Since `port` is `9042` (which is truthy), `self.port` becomes `9042`, and `conf.get('cassandra_port', None)` is never evaluated! If the user provides `cassandra_port` in the config, they want that to be used instead of the default `9042`. So the bug is in the `__init__` method's handling of `port`. ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', None) ``` If `port` is the default `9042`, `self.port` becomes `9042`, ignoring `cassandra_port`. It should probably be: ```python self.port = conf.get('cassandra_port', port) ``` Or something similar. Wait, if `port` is passed as an argument to `__init__`, it should probably take precedence over the config. If `port` is `None`, it should use the config. But `port` has a default of `9042`. Let's check how other parameters are handled: `self.servers = servers or conf.get('cassandra_servers', None)` `self.bundle_path = bundle_path or conf.get('cassandra_secure_bundle_path', None)` Wait, these also have the same pattern. If `servers` is provided, it uses it, otherwise it uses the config. But `port` has a default value of `9042`. If I call `CassandraBackend(port=1234)`, it uses `1234`. If I call `CassandraBackend()`, it uses `9042` as the default `port` argument, and then `self.port = 9042 or conf.get('cassandra_port', None)`, which is `9042`. The fix should be to change the default value of `port` to `None` in `__init__`, and then handle the default `9042` later. Or change the `self.port` assignment. Let's see: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): ``` If we change it to: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): ``` Then `self.port = port or conf.get('cassandra_port', None)` will work if either `port` or `cassandra_port` is provided. But then if neither is provided, `self.port` will be `None`. Will `cassandra.cluster.Cluster(self.servers, port=None, ...)` use the default port? According to DataStax driver documentation, if `port` is not specified, it defaults to 9042. So changing the default value of `port` to `None` seems correct. Let's verify the DataStax driver behavior. Actually, I don't have access to the internet, but usually, driver defaults are handled within the driver. Wait, if I change `port=9042` to `port=None`, then: `self.port = port or conf.get('cassandra_port', None)` If both are `None`, `self.port` is `None`. Then `cassandra.cluster.Cluster(self.servers, port=self.port, ...)` is called as `cassandra.cluster.Cluster(self.servers, port=None, ...)` If the driver's `Cluster` class handles `port=None` by using 9042, we are good. Let's check if there's a better way. Maybe: ```python self.port = port if port is not None else conf.get('cassandra_port', 9042) ``` Wait, the current code is: `self.port = port or conf.get('cassandra_port', None)` If `port` is `9042`, this is always `9042`. If I change it to: ```python self.port = conf.get('cassandra_port', port) ``` Then if `cassandra_port` is in config, it's used. If not, `port` (default 9042) is used. But if `CassandraBackend` is instantiated with a specific `port` argument, that `port` argument is ignored if `cassandra_port` is in config. That seems acceptable and consistent with how Celery usually handles config vs arguments. Actually, let's see. If the user does `CassandraBackend(port=1234)`, they probably want to override everything. The current pattern for `servers` is: `self.servers = servers or conf.get('cassandra_servers', None)` If `servers` is provided, it's used. So for `port`, it should be: `self.port = port if port is not None else conf.get('cassandra_port', 9042)` But `port` is already `9042` by default in the signature. Let's try this: 1. Change `port=9042` to `port=None` in the `__init__` signature. 2. Use `self.port = port or conf.get('cassandra_port', 9042)`. Wait, if `port` is `None` in signature: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): # ... self.port = port or conf.get('cassandra_port', 9042) ``` This looks correct. If `port` is passed, use it. Otherwise use `cassandra_port` from config. Otherwise use `9042`. Let's see if I can reproduce this. I can't run a Cassandra server, but I can mock `cassandra.cluster.Cluster`. Reproduction script: ```python import unittest from unittest.mock import MagicMock, patch # Mock the cassandra module import sys mock_cassandra = MagicMock() sys.modules['cassandra'] = mock_cassandra sys.modules['cassandra.cluster'] = mock_cassandra.cluster sys.modules['cassandra.auth'] = mock_cassandra.auth sys.modules['cassandra.query'] = mock_cassandra.query from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def test_port_config_used(self): # Mock app and conf mock_app = MagicMock() mock_app.conf = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 61003) # Trigger connection to see if it's passed to Cluster backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=61003, auth_provider=None, **{} ) def test_port_arg_used(self): mock_app = MagicMock() mock_app.conf = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } backend = CassandraBackend(app=mock_app, port=1234) self.assertEqual(backend.port, 1234) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=1234, auth_provider=None, **{} ) def test_default_port_used(self): mock_app = MagicMock() mock_app.conf = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', # cassandra_port is NOT set } backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 9042) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=9042, auth_provider=None, **{} ) ``` Let's run this. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock, patch import sys # Mock the cassandra module mock_cassandra = MagicMock() sys.modules['cassandra'] = mock_cassandra sys.modules['cassandra.cluster'] = mock_cassandra.cluster sys.modules['cassandra.auth'] = mock_cassandra.auth sys.modules['cassandra.query'] = mock_cassandra.query from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def test_port_config_used(self): # Mock app and conf mock_app = MagicMock() mock_app.conf = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } # Use a dict-like object for conf if needed, but a dict should work for .get() backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 61003) # Trigger connection to see if it's passed to Cluster backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=61003, auth_provider=None, **{} ) def test_port_arg_used(self): mock_app = MagicMock() mock_app.conf = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } backend = CassandraBackend(app=mock_app, port=1234) self.assertEqual(backend.port, 1234) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=1234, auth_provider=None, **{} ) def test_default_port_used(self): mock_app = MagicMock() mock_app.conf = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', } backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 9042) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=9042, auth_provider=None, **{} ) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 867 tokens · stopped: STOP
The error is because `mock_app.conf` is a `dict`, and `BaseBackend.__init__` expects it to be an object with attributes (like `conf.result_serializer`).

I should use a `MagicMock` for `conf` as well.

The error is because `mock_app.conf` is a `dict`, and `BaseBackend.__init__` expects it to be an object with attributes (like `conf.result_serializer`). I should use a `MagicMock` for `conf` as well. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock, patch import sys # Mock the cassandra module mock_cassandra = MagicMock() sys.modules['cassandra'] = mock_cassandra sys.modules['cassandra.cluster'] = mock_cassandra.cluster sys.modules['cassandra.auth'] = mock_cassandra.auth sys.modules['cassandra.query'] = mock_cassandra.query from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def setup_app(self, conf_data): mock_app = MagicMock() mock_conf = MagicMock() # Support both .get() and attribute access mock_conf.get.side_effect = lambda key, default=None: conf_data.get(key, default) for k, v in conf_data.items(): setattr(mock_conf, k, v) # Add default for result_serializer if 'result_serializer' not in conf_data: mock_conf.result_serializer = 'json' mock_app.conf = mock_conf return mock_app def test_port_config_used(self): conf_data = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } mock_app = self.setup_app(conf_data) backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 61003) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=61003, auth_provider=None, **{} ) def test_port_arg_used(self): conf_data = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } mock_app = self.setup_app(conf_data) backend = CassandraBackend(app=mock_app, port=1234) self.assertEqual(backend.port, 1234) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=1234, auth_provider=None, **{} ) def test_default_port_used(self): conf_data = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', } mock_app = self.setup_app(conf_data) backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 9042) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=9042, auth_provider=None, **{} ) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 961 tokens · stopped: STOP
Perfect! The reproduction script failed exactly as expected. `test_port_config_used` failed because `backend.port` stayed `9042` instead of using the `61003` from the config.

Now let's implement the fix.
I'll change the `__init__` signature to have `port=None` and then handle the default in the assignment.

Wait, let's check the `__init__` line again.

```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=9042, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', None)
```

I will change it to:
```python
    def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
                 port=None, bundle_path=None, **kwargs):
        super().__init__(**kwargs)

        if not cassandra:
            raise ImproperlyConfigured(E_NO_CASSANDRA)

        conf = self.app.conf
        self.servers = servers or conf.get('cassandra_servers', None)
        self.bundle_path = bundle_path or conf.get(
            'cassandra_secure_bundle_path', None)
        self.port = port or conf.get('cassandra_port', 9042)
```

Wait, if I do `self.port = port or conf.get('cassandra_port', 9042)`, and `port` is `None`, and `cassandra_port` is `None`, then `self.port` is `9042`. This is correct.
If `port` is provided (e.g., `1234`), then `self.port` is `1234`. This is correct.
If `port` is `None` and `cassandra_port` is `61003`, then `self.port` is `61003`. This is correct.

Wait, one detail. What if `port` is passed as `0`? Unlikely for a port, but `0 or something` is `something`. In the case of ports, `0` is not a valid port we'd expect here.

Let's apply this change.

Perfect! The reproduction script failed exactly as expected. `test_port_config_used` failed because `backend.port` stayed `9042` instead of using the `61003` from the config. Now let's implement the fix. I'll change the `__init__` signature to have `port=None` and then handle the default in the assignment. Wait, let's check the `__init__` line again. ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', None) ``` I will change it to: ```python def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', 9042) ``` Wait, if I do `self.port = port or conf.get('cassandra_port', 9042)`, and `port` is `None`, and `cassandra_port` is `None`, then `self.port` is `9042`. This is correct. If `port` is provided (e.g., `1234`), then `self.port` is `1234`. This is correct. If `port` is `None` and `cassandra_port` is `61003`, then `self.port` is `61003`. This is correct. Wait, one detail. What if `port` is passed as `0`? Unlikely for a port, but `0 or something` is `something`. In the case of ports, `0` is not a valid port we'd expect here. Let's apply this change. <channel|><|tool_call>call:edit_file{filepath:<|"|>celery/backends/cassandra.py<|"|>,new_string:<|"|> def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', 9042)`,old_string:<|"|> def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', None)`}<tool_call|><|tool_response>
Generated tokens 354 tokens · stopped: STOP
My apologies, I messed up the `edit_file` arguments.
My apologies, I messed up the `edit_file` arguments.<channel|><|tool_call>call:edit_file{filepath:<|"|>celery/backends/cassandra.py<|"|>,new_string:<|"|> def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=None, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', 9042)<|"|>,old_string:<|"|> def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None, port=9042, bundle_path=None, **kwargs): super().__init__(**kwargs) if not cassandra: raise ImproperlyConfigured(E_NO_CASSANDRA) conf = self.app.conf self.servers = servers or conf.get('cassandra_servers', None) self.bundle_path = bundle_path or conf.get( 'cassandra_secure_bundle_path', None) self.port = port or conf.get('cassandra_port', None)<|"|>}<tool_call|><|tool_response>
Generated tokens 823 tokens · stopped: STOP
Now let's run the reproduction script again to verify the fix.
Now let's run the reproduction script again to verify the fix.<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import unittest from unittest.mock import MagicMock, patch import sys # Mock the cassandra module mock_cassandra = MagicMock() sys.modules['cassandra'] = mock_cassandra sys.modules['cassandra.cluster'] = mock_cassandra.cluster sys.modules['cassandra.auth'] = mock_cassandra.auth sys.modules['cassandra.query'] = mock_cassandra.query from celery.backends.cassandra import CassandraBackend class TestCassandraBackendPort(unittest.TestCase): def setup_app(self, conf_data): mock_app = MagicMock() mock_conf = MagicMock() # Support both .get() and attribute access mock_conf.get.side_effect = lambda key, default=None: conf_data.get(key, default) for k, v in conf_data.items(): setattr(mock_conf, k, v) # Add default for result_serializer if 'result_serializer' not in conf_data: mock_conf.result_serializer = 'json' mock_app.conf = mock_conf return mock_app def test_port_config_used(self): conf_data = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } mock_app = self.setup_app(conf_data) backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 61003) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=61003, auth_provider=None, **{} ) def test_port_arg_used(self): conf_data = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', 'cassandra_port': 61003, } mock_app = self.setup_app(conf_data) backend = CassandraBackend(app=mock_app, port=1234) self.assertEqual(backend.port, 1234) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=1234, auth_provider=None, **{} ) def test_default_port_used(self): conf_data = { 'cassandra_servers': ['localhost'], 'cassandra_keyspace': 'test_keyspace', 'cassandra_table': 'test_table', } mock_app = self.setup_app(conf_data) backend = CassandraBackend(app=mock_app) self.assertEqual(backend.port, 9042) backend._get_connection() mock_cassandra.cluster.Cluster.assert_called_with( ['localhost'], port=9042, auth_provider=None, **{} ) if __name__ == '__main__': unittest.main() PY <|"|>}<tool_call|><|tool_response>
Generated tokens 152 tokens · stopped: STOP
The tests passed! I have verified that:
1. `cassandra_port` in the configuration is now used when no `port` argument is provided.
2. The `port` argument still takes precedence over the configuration.
3. The default port `9042` is used if neither is provided.

Finally, let's check if there are any other files that need similar fixes. I only searched for `cassandra_port` in `celery/backends/cassandra.py`.

Let's double check if there are any other Cassandra-related backends.
The tests passed! I have verified that: 1. `cassandra_port` in the configuration is now used when no `port` argument is provided. 2. The `port` argument still takes precedence over the configuration. 3. The default port `9042` is used if neither is provided. Finally, let's check if there are any other files that need similar fixes. I only searched for `cassandra_port` in `celery/backends/cassandra.py`. Let's double check if there are any other Cassandra-related backends. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "cassandra_port" .<|"|>}<tool_call|><|tool_response>
Generated tokens 62 tokens · stopped: STOP
Only one occurrence, and that's the one I fixed.

I'm confident in the fix. I'll do a final check of `git status` and `git diff`.

Only one occurrence, and that's the one I fixed. I'm confident in the fix. I'll do a final check of `git status` and `git diff`. <channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 23 tokens · stopped: STOP
The diff looks clean. I'm ready to submit.
The diff looks clean. I'm ready to submit. <channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>

Patch, tests and logs

Final code change Included
diff --git a/celery/backends/cassandra.py b/celery/backends/cassandra.py
index 0eb37f3..3c8d129 100644
--- a/celery/backends/cassandra.py
+++ b/celery/backends/cassandra.py
@@ -86,7 +86,7 @@ class CassandraBackend(BaseBackend):
     supports_autoexpire = True      # autoexpire supported via entry_ttl
 
     def __init__(self, servers=None, keyspace=None, table=None, entry_ttl=None,
-                 port=9042, bundle_path=None, **kwargs):
+                 port=None, bundle_path=None, **kwargs):
         super().__init__(**kwargs)
 
         if not cassandra:
@@ -96,7 +96,7 @@ class CassandraBackend(BaseBackend):
         self.servers = servers or conf.get('cassandra_servers', None)
         self.bundle_path = bundle_path or conf.get(
             'cassandra_secure_bundle_path', None)
-        self.port = port or conf.get('cassandra_port', None)
+        self.port = port or conf.get('cassandra_port', 9042)
         self.keyspace = keyspace or conf.get('cassandra_keyspace', None)
         self.table = table or conf.get('cassandra_table', None)
         self.cassandra_options = conf.get('cassandra_options', {})
Test output Included
============================= test session starts ==============================
collected 12 items

t/unit/backends/test_cassandra.py ...........F                           [100%]

=================================== FAILURES ===================================
/celery/t/unit/backends/test_cassandra.py:273: assert None == 9042
==================================== PASSES ====================================
- generated xml file: /tmp/rebench-grade-5acc4d4fbb9045acae1de820ea1f54c6.xml --
=========================== short test summary info ============================
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_no_cassandra
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_with_and_without_LOCAL_QUROM
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_with_cloud
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_reduce
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_get_task_meta_for
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_as_uri
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_store_result
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_timeouting_cluster
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_create_result_table
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_init_session
PASSED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_auth_provider
FAILED t/unit/backends/test_cassandra.py::test_CassandraBackend::test_options
========================= 1 failed, 11 passed in 0.06s =========================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite name="pytest" errors="0" failures="1" skipped="0" tests="12" time="0.065" timestamp="2026-11-14T05:06:44.824879+00:00" hostname="90daacc0fc93"><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_no_cassandra" time="0.009" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_with_and_without_LOCAL_QUROM" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_with_cloud" time="0.014" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_reduce" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_get_task_meta_for" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_as_uri" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_store_result" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_timeouting_cluster" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_create_result_table" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_init_session" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_auth_provider" time="0.001" /><testcase classname="t.unit.backends.test_cassandra.test_CassandraBackend" name="test_options" time="0.001"><failure message="assert None == 9042&#10; +  where None = &lt;celery.backends.cassandra.CassandraBackend object at 0x75dfc6ce2ec0&gt;.port">E   assert None == 9042
     +  where None = &lt;celery.backends.cassandra.CassandraBackend object at 0x75dfc6ce2ec0&gt;.port</failure></testcase></testsuite></testsuites>
Agent log Included
  [   0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
  [   0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository celery/celery.
  [  23.3s] 💭 (808 chars) "The user is reporting that the `cassandra_port` configuration is not working when using the 
Cassandra backend for Celery..."
  [  23.3s] 🔧 run_command grep -rn --include="*.py" "cassandra_port" .
  [  23.4s]   → ./celery/backends/cassandra.py:99:        self.port = port or conf.get('cassandra_port', None)
  [  27.4s] 💭 (156 chars) "Okay, `cassandra_port` is mentioned in `celery/backends/cassandra.py` at line 99.
Let's read the content of `celery/back..."
  [  27.4s] 📖 read_file (celery/backends/cassandra.py)
  [  27.4s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'content': '"""Apache Cassandra result 
store backend using …
  [  32.4s] 💭 (55 chars) "I need to see the rest of the `_get_connection` method."
  [  32.4s] 📖 read_file (celery/backends/cassandra.py)
  [  32.5s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'content': '"""Apache Cassandra result 
store backend using …
  [  54.3s] 💭 (645 chars) "I made a mistake in `read_file` and it returned the first 150 lines again because I didn't 
specify `end_line` and might ..."
  [  54.3s] 📖 read_file (celery/backends/cassandra.py)
  [  54.3s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'content': '        try:\n            if 
self._session is n…
  [ 211.0s] 💭 (8023 chars) "Wait, I see the code:
```python
            if self.servers:
                self._cluster = cassandra.cluster.Cluster(
..."
  [ 211.0s] 🔧 run_command (77 lines) python3 - <<'PY'
  [ 211.5s]   → error (exit 0): 
  [ 240.9s] 💭 (200 chars) "The error is because `mock_app.conf` is a `dict`, and `BaseBackend.__init__` expects it to 
be an object with attributes ..."
  [ 240.9s] 🔧 run_command (85 lines) python3 - <<'PY'
  [ 241.1s]   → error (exit 0): 
  [ 269.2s] 💭 (1991 chars) "Perfect! The reproduction script failed exactly as expected. `test_port_config_used` failed
because `backend.port` staye..."
  [ 269.2s] ✏️ edit_file (celery/backends/cassandra.py)
  [ 269.2s]   ❌ {'error': 'Invoking `edit_file()` failed as the following mandatory input parameters are not 
present:\nold_string\nYou c…
  [ 300.3s] 💭 (52 chars) "My apologies, I messed up the `edit_file` arguments."
  [ 300.3s] ✏️ edit_file (celery/backends/cassandra.py)
  [ 300.5s]   ✓ {'status': 'ok', 'filepath': 'celery/backends/cassandra.py', 'occurrences': 1, 'strategy': 'exact', 
'diff': "--- a/celer…
  [ 312.1s] 💭 (62 chars) "Now let's run the reproduction script again to verify the fix."
  [ 312.1s] 🔧 run_command (85 lines) python3 - <<'PY'
  [ 312.2s]   🔧 
  [ 317.3s] 💭 (477 chars) "The tests passed! I have verified that:
1. `cassandra_port` in the configuration is now used when no `port` argument is ..."
  [ 317.3s] 🔧 run_command grep -rn --include="*.py" "cassandra_port" .
  [ 317.4s]   → ./celery/backends/cassandra.py:99:        self.port = port or conf.get('cassandra_port', 9042)
  [ 319.4s] 💭 (129 chars) "Only one occurrence, and that's the one I fixed.

I'm confident in the fix. I'll do a final check of `git status` and `g..."
  [ 319.4s] 🔧 run_command git status --short && git diff
  [ 319.5s]   →  M celery/backends/cassandra.py
  [ 320.4s] 💭 (42 chars) "The diff looks clean. I'm ready to submit."
  [ 320.4s] 🤖 submit_patch
  [ 320.5s]   → submit_patch: {"status": "ok", "patch_size": 1127, "files_changed": 1}
  [ 326.6s] 💭 (441 chars) "The issue was that the `CassandraBackend.__init__` method had a default `port=9042` in its 
signature, which caused the `..."
  [ 326.6s] ✅ Agent finished: The `cassandra_port` configuration was being ignored because the 
`CassandraBackend.__init__` method used a default value of `9042` for the `port` parameter, which took precedence over 
the configuratio...
Native result row
{
  "agent_error": null,
  "duration_seconds": 395.72,
  "error": "Test failures/errors recorded in JUnit XML (failures=1, errors=0)",
  "grade": {
    "collected_tests": 12,
    "competition_junit_ok": false,
    "error": "Test failures/errors recorded in JUnit XML (failures=1, errors=0)",
    "required_issues_count": 1,
    "resolved": false,
    "status_counts": {
      "FAILED": 1,
      "PASSED": 11
    },
    "strict_clean_patch": true,
    "test_exit_code": 1
  },
  "instance_id": "celery__celery-9465",
  "pass_idx": 0,
  "patch_chars": 1127,
  "phase1_seconds": 394.01,
  "repo": "celery/celery",
  "request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/celery__celery-9465__p0__r6.jsonl",
  "resolved": false,
  "rollout_idx": 6,
  "run_key": "celery__celery-9465__p0__r6",
  "strict_clean_patch": true,
  "tool_calls": 10,
  "total_llm_calls": 13,
  "trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_celery__celery-9465__p0__r6.json"
}