ROLLOUT 3 · Azure/WALinuxAgent
azure__walinuxagent-547
Solved
408 stotal time
18tool calls
20model calls
5,985tokens generated
187,327prompt tokens read
No error recorded
⚠ The request log has 19 model calls but the trace has 21 agent calls, so tokens are listed separately instead of beside each turn.
Turn by turn
Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.
System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`. Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run. ## Critical Environment & Grader Rules 1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`. 2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files. 3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`. 4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks: `pytest path/to/test_file.py -k pattern -q --tb=short --no-header` If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off. 5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission. ## Execution Protocol ### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls) - The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories. - Run a single compound `run_command` with `grep -rn --include="*.py"` to locate: (a) the exact symbols, error strings, or functions from the problem description, (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and (c) the closest existing unit test files under `tests/`. ### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls) - Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests. - Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types. ### Phase 3 — Reproduce Bug in One Call (1 tool call) - Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts. ### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls) - Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`. - Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests. - **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`. ### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls) - Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`. - Run `git status --short && git diff` via `run_command`. Confirm: - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately), - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched), - Minimal, clean diff with valid imports and indentation. - Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 6,001 characters
You are evaluating a software engineering task for repository Azure/WALinuxAgent.
Problem Statement:
[2.2.0+] Cannot run waagent command inside any folder under /var/lib/waagent
Description of problem:
Cannot run any waagent command (such as: waagent -version, waagent -deprovision...) inside the any folder under /var/lib/waagent (such as: /var/lib/waagent/events)
It seems that if create a folder inside /var/lib/waagent, go into this folder, any waagent command cannot be run.
Version-Release number of selected component (if applicable):
WALinuxAgent-2.2.0+
RHEL Version:
RHEL-7.3
How reproducible:
100%
Steps to Reproduce:
1. Prepare a RHEL-7.3 VM with WALA-2.2.0+ installed.
2. Access to the /var/lib/waagent/events folder.
~]# cd /var/lib/waagent/events
4. Run waagent command
events]# waagent -version
Actual Result:
Raise exception. Cannot run this command.
events]# waagent -version
Traceback (most recent call last):
File "/sbin/waagent", line 31, in <module>
import azurelinuxagent.agent as agent
File "/usr/lib/python2.7/site-packages/azurelinuxagent/agent.py", line 29, in <module>
import azurelinuxagent.common.event as event
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/event.py", line 30, in <module>
from azurelinuxagent.common.protocol.restapi import TelemetryEventParam, \
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/protocol/__init__.py", line 18, in <module>
from azurelinuxagent.common.protocol.util import get_protocol_util, \
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/protocol/util.py", line 30, in <module>
from azurelinuxagent.common.osutil import get_osutil
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/osutil/__init__.py", line 18, in <module>
from azurelinuxagent.common.osutil.factory import get_osutil
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/osutil/factory.py", line 20, in <module>
from azurelinuxagent.common.version import DISTRO_NAME, DISTRO_VERSION, \
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 87, in <module>
CURRENT_AGENT, CURRENT_VERSION = set_current_agent()
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 85, in set_current_agent
version = AGENT_NAME_PATTERN.match(agent).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
Expect Result:
Can run waagent command.
## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns
## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.
## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./Changelog
./LICENSE.txt
./MAINTENANCE.md
./MANIFEST
./MANIFEST.in
./NOTICE
./README.md
./__main__.py
./azurelinuxagent
./azurelinuxagent/__init__.py
./azurelinuxagent/agent.py
./azurelinuxagent/common
./azurelinuxagent/common/__init__.py
./azurelinuxagent/common/conf.py
./azurelinuxagent/common/dhcp.py
./azurelinuxagent/common/event.py
./azurelinuxagent/common/exception.py
./azurelinuxagent/common/future.py
./azurelinuxagent/common/logger.py
./azurelinuxagent/common/osutil
./azurelinuxagent/common/protocol
./azurelinuxagent/common/rdma.py
./azurelinuxagent/common/utils
./azurelinuxagent/common/version.py
./azurelinuxagent/daemon
./azurelinuxagent/daemon/__init__.py
./azurelinuxagent/daemon/main.py
./azurelinuxagent/daemon/resourcedisk
./azurelinuxagent/daemon/scvmm.py
./azurelinuxagent/distro
./azurelinuxagent/distro/__init__.py
./azurelinuxagent/distro/suse
./azurelinuxagent/ga
./azurelinuxagent/ga/__init__.py
./azurelinuxagent/ga/env.py
./azurelinuxagent/ga/exthandlers.py
./azurelinuxagent/ga/monitor.py
./azurelinuxagent/ga/update.py
./azurelinuxagent/pa
./azurelinuxagent/pa/__init__.py
./azurelinuxagent/pa/deprovision
./azurelinuxagent/pa/provision
./azurelinuxagent/pa/rdma
./bin
./bin/waagent
./bin/waagent2.0
./config
./config/66-azure-storage.rules
./config/99-azure-product-uuid.rules
./config/alpine
./config/alpine/waagent.conf
./config/bigip
./config/bigip/waagent.conf
./config/clearlinux
./config/clearlinux/waagent.conf
./config/coreos
./config/coreos/waagent.conf
./config/freebsd
./config/freebsd/waagent.conf
./config/suse
./config/suse/waagent.conf
./config/ubuntu
./config/ubuntu/waagent.conf
./config/waagent.conf
./config/waagent.logrotate
./init
./init/clearlinux
./init/clearlinux/waagent.service
./init/coreos
./init/coreos/cloud-config.yml
./init/freebsd
./init/freebsd/waagent
./init/suse
./init/suse/waagent
./init/ubuntu
./init/ubuntu/walinuxagent
./init/ubuntu/walinuxagent.conf
./init/ubuntu/walinuxagent.service
./init/waagent
./init/waagent.service
./makepkg.py
./setup.py
./tests
```
Turn 1at 20 s336 tokens out3,912 prompt tokens
The user is reporting a bug where running `waagent` commands fails when the current working directory is under `/var/lib/waagent`.
The traceback shows the failure happens in `azurelinuxagent/common/version.py` in the `set_current_agent` function.
Specifically:
```python
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 87, in <module>
CURRENT_AGENT, CURRENT_VERSION = set_current_agent()
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 85, in set_current_agent
version = AGENT_NAME_PATTERN.match(agent).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
```
It seems `AGENT_NAME_PATTERN.match(agent)` is returning `None`, and then `.group(1)` is called on it.
This happens in `set_current_agent()` in `azurelinuxagent/common/version.py`.
I need to examine `azurelinuxagent/common/version.py` to understand how `set_current_agent` is implemented and why it fails when the CWD is under `/var/lib/waagent`.
Let's start by reading `azurelinuxagent/common/version.py`.
TOOL CALL · read_file
{
"filepath": "azurelinuxagent/common/version.py"
}Result of read_file 5,740 characters
{
"status": "ok",
"filepath": "azurelinuxagent/common/version.py",
"content": "# Copyright 2014 Microsoft Corporation\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n#\n# Requires Python 2.4+ and Openssl 1.0+\n#\n\nimport os\nimport re\nimport platform\nimport sys\n\nimport azurelinuxagent.common.conf as conf\nimport azurelinuxagent.common.utils.fileutil as fileutil\nfrom azurelinuxagent.common.utils.flexible_version import FlexibleVersion\nfrom azurelinuxagent.common.future import ustr\n\n\n\"\"\"\nAdd this workaround for detecting F5 products because BIG-IP/IQ/etc do not show\ntheir version info in the /etc/product-version location. Instead, the version\nand product information is contained in the /VERSION file.\n\"\"\"\ndef get_f5_platform():\n result = [None,None,None,None]\n f5_version = re.compile(\"^Version: (\\d+\\.\\d+\\.\\d+)\")\n f5_product = re.compile(\"^Product: ([\\w-]+)\")\n\n with open('/VERSION', 'r') as fh:\n content = fh.readlines()\n for line in content:\n version_matches = f5_version.match(line)\n product_matches = f5_product.match(line)\n if version_matches:\n result[1] = version_matches.group(1)\n elif product_matches:\n result[3] = product_matches.group(1)\n if result[3] == \"BIG-IP\":\n result[0] = \"bigip\"\n result[2] = \"bigip\"\n elif result[3] == \"BIG-IQ\":\n result[0] = \"bigiq\"\n result[2] = \"bigiq\"\n elif result[3] == \"iWorkflow\":\n result[0] = \"iworkflow\"\n result[2] = \"iworkflow\"\n return result\n\ndef get_distro():\n if 'FreeBSD' in platform.system():\n release = re.sub('\\-.*\\Z', '', ustr(platform.release()))\n osinfo = ['freebsd', release, '', 'freebsd']\n elif 'linux_distribution' in dir(platform):\n osinfo = list(platform.linux_distribution(full_distribution_name=0,\n supported_dists=platform._supported_dists+('alpine',)))\n full_name = platform.linux_distribution()[0].strip()\n osinfo.append(full_name)\n else:\n osinfo = platform.dist()\n\n # The platform.py lib has issue with detecting oracle linux distribution.\n # Merge the following patch provided by oracle as a temporary fix.\n if os.path.exists(\"/etc/oracle-release\"):\n osinfo[2] = \"oracle\"\n osinfo[3] = \"Oracle Linux\"\n\n # The platform.py lib has issue with detecting BIG-IP linux distribution.\n # Merge the following patch provided by F5.\n if os.path.exists(\"/shared/vadc\"):\n osinfo = get_f5_platform()\n\n # Remove trailing whitespace and quote in distro name\n osinfo[0] = osinfo[0].strip('\"').strip(' ').lower()\n return osinfo\n\n\nAGENT_NAME = \"WALinuxAgent\"\nAGENT_LONG_NAME = \"Azure Linux Agent\"\nAGENT_VERSION = '2.2.2'\nAGENT_LONG_VERSION = \"{0}-{1}\".format(AGENT_NAME, AGENT_VERSION)\nAGENT_DESCRIPTION = \"\"\"\\\nThe Azure Linux Agent supports the provisioning and running of Linux\nVMs in the Azure cloud. This package should be installed on Linux disk\nimages that are built to run in the Azure environment.\n\"\"\"\n\nAGENT_DIR_GLOB = \"{0}-*\".format(AGENT_NAME)\nAGENT_PKG_GLOB = \"{0}-*.zip\".format(AGENT_NAME)\n\nAGENT_PATTERN = \"{0}-(.*)\".format(AGENT_NAME)\nAGENT_NAME_PATTERN = re.compile(AGENT_PATTERN)\nAGENT_DIR_PATTERN = re.compile(\".*/{0}\".format(AGENT_PATTERN))\n\nEXT_HANDLER_PATTERN = b\".*/WALinuxAgent-(\\w.\\w.\\w[.\\w]*)-.*-run-exthandlers\"\nEXT_HANDLER_REGEX = re.compile(EXT_HANDLER_PATTERN)\n\n# Set the CURRENT_AGENT and CURRENT_VERSION to match the agent directory name\n# - This ensures the agent will \"see itself\" using the same name and version\n# as the code that downloads agents.\ndef set_current_agent():\n path = os.getcwd()\n lib_dir = conf.get_lib_dir()\n if lib_dir[-1] != os.path.sep:\n lib_dir += os.path.sep\n if path[:len(lib_dir)] != lib_dir:\n agent = AGENT_LONG_VERSION\n version = AGENT_VERSION\n else:\n agent = path[len(lib_dir):].split(os.path.sep)[0]\n version = AGENT_NAME_PATTERN.match(agent).group(1)\n return agent, FlexibleVersion(version)\nCURRENT_AGENT, CURRENT_VERSION = set_current_agent()\n\ndef set_goal_state_agent():\n agent = None\n pids = [pid for pid in os.listdir('/proc') if pid.isdigit()]\n for pid in pids:\n try:\n pname = open(os.path.join('/proc', pid, 'cmdline'), 'rb').read()\n match = EXT_HANDLER_REGEX.match(pname)\n if match:\n agent = match.group(1)\n break\n except IOError:\n continue\n if agent is None:\n agent = CURRENT_VERSION\n return agent\nGOAL_STATE_AGENT_VERSION = set_goal_state_agent()\n\ndef is_current_agent_installed():\n return CURRENT_AGENT == AGENT_LONG_VERSION\n\n\n__distro__ = get_distro()\nDISTRO_NAME = __distro__[0]\nDISTRO_VERSION = __distro__[1]\nDISTRO_CODE_NAME = __distro__[2]\nDISTRO_FULL_NAME = __distro__[3]\n",
"start_line": 1,
"end_line": 150,
"total_lines": 172,
"is_truncated": true
}Turn 2at 75 s927 tokens out5,996 prompt tokens
The problematic code is in `set_current_agent()`:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
return agent, FlexibleVersion(version)
```
Wait, look at the logic:
1. `path = os.getcwd()`
2. `lib_dir = conf.get_lib_dir()`
3. If `path` does not start with `lib_dir`, it uses `AGENT_LONG_VERSION` and `AGENT_VERSION`.
4. If `path` DOES start with `lib_dir`, it assumes that the directory structure is `lib_dir/WALinuxAgent-version/...`.
`agent = path[len(lib_dir):].split(os.path.sep)[0]`
And then it tries to match `agent` with `AGENT_NAME_PATTERN = re.compile("WALinuxAgent-(.*)")`.
The problem description says:
"Cannot run waagent command (such as: waagent -version, waagent -deprovision...) inside the any folder under /var/lib/waagent (such as: /var/lib/waagent/events)"
If `conf.get_lib_dir()` returns `/var/lib/waagent`, and the current directory is `/var/lib/waagent/events`:
- `path` = `/var/lib/waagent/events`
- `lib_dir` = `/var/lib/waagent/` (after adding separator)
- `path[:len(lib_dir)]` is `/var/lib/waagent/`, which equals `lib_dir`.
- `path[len(lib_dir):]` is `events`.
- `agent = "events".split('/')[0]` is `"events"`.
- `AGENT_NAME_PATTERN.match("events")` is `None`.
- `None.group(1)` raises `AttributeError: 'NoneType' object has no attribute 'group'`.
So the assumption is that if you are inside `lib_dir`, you must be in a versioned agent directory. But you could just be in a subdirectory of `lib_dir` that isn't a versioned agent directory (like `/var/lib/waagent/events`).
To fix this, we should check if `AGENT_NAME_PATTERN.match(agent)` is actually successful before calling `.group(1)`. If not, we should probably fall back to `AGENT_LONG_VERSION` and `AGENT_VERSION`.
Wait, if the agent is installed in `/var/lib/waagent` and the code is running from there, the purpose of this logic seems to be to detect which version of the agent is currently executing if it's running from a versioned directory (maybe for updates?).
If `agent` doesn't match the pattern, it means we aren't in a versioned directory. In that case, we should use the defaults.
Let's see what `AGENT_LONG_VERSION` and `AGENT_VERSION` are.
`AGENT_NAME = "WALinuxAgent"`
`AGENT_VERSION = '2.2.2'`
`AGENT_LONG_VERSION = "WALinuxAgent-2.2.2"`
The logic should be:
If `path` starts with `lib_dir`, try to extract the version. If extraction fails, use the default.
Let's try to reproduce this first.
I need to know what `conf.get_lib_dir()` returns.
Looking at `azurelinuxagent/common/conf.py` might help.
TOOL CALL · read_file
{
"filepath": "azurelinuxagent/common/conf.py"
}Result of read_file 4,760 characters
{
"status": "ok",
"filepath": "azurelinuxagent/common/conf.py",
"content": "# Microsoft Azure Linux Agent\n#\n# Copyright 2014 Microsoft Corporation\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n#\n# Requires Python 2.4+ and Openssl 1.0+\n#\n\n\"\"\"\nModule conf loads and parses configuration file\n\"\"\"\nimport os\nimport azurelinuxagent.common.utils.fileutil as fileutil\nfrom azurelinuxagent.common.exception import AgentConfigError\n\n\nclass ConfigurationProvider(object):\n \"\"\"\n Parse amd store key:values in /etc/waagent.conf.\n \"\"\"\n\n def __init__(self):\n self.values = dict()\n\n def load(self, content):\n if not content:\n raise AgentConfigError(\"Can't not parse empty configuration\")\n for line in content.split('\\n'):\n if not line.startswith(\"#\") and \"=\" in line:\n parts = line.split()[0].split('=')\n value = parts[1].strip(\"\\\" \")\n if value != \"None\":\n self.values[parts[0]] = value\n else:\n self.values[parts[0]] = None\n\n def get(self, key, default_val):\n val = self.values.get(key)\n return val if val is not None else default_val\n\n def get_switch(self, key, default_val):\n val = self.values.get(key)\n if val is not None and val.lower() == 'y':\n return True\n elif val is not None and val.lower() == 'n':\n return False\n return default_val\n\n def get_int(self, key, default_val):\n try:\n return int(self.values.get(key))\n except TypeError:\n return default_val\n except ValueError:\n return default_val\n\n\n__conf__ = ConfigurationProvider()\n\n\ndef load_conf_from_file(conf_file_path, conf=__conf__):\n \"\"\"\n Load conf file from: conf_file_path\n \"\"\"\n if os.path.isfile(conf_file_path) == False:\n raise AgentConfigError((\"Missing configuration in {0}\"\n \"\").format(conf_file_path))\n try:\n content = fileutil.read_file(conf_file_path)\n conf.load(content)\n except IOError as err:\n raise AgentConfigError((\"Failed to load conf file:{0}, {1}\"\n \"\").format(conf_file_path, err))\n\n\ndef enable_rdma(conf=__conf__):\n return conf.get_switch(\"OS.EnableRDMA\", False) or \\\n conf.get_switch(\"OS.UpdateRdmaDriver\", False) or \\\n conf.get_switch(\"OS.CheckRdmaDriver\", False)\n\n\ndef get_logs_verbose(conf=__conf__):\n return conf.get_switch(\"Logs.Verbose\", False)\n\n\ndef get_lib_dir(conf=__conf__):\n return conf.get(\"Lib.Dir\", \"/var/lib/waagent\")\n\n\ndef get_published_hostname(conf=__conf__):\n return os.path.join(get_lib_dir(conf), 'published_hostname')\n\n\ndef get_dvd_mount_point(conf=__conf__):\n return conf.get(\"DVD.MountPoint\", \"/mnt/cdrom/secure\")\n\n\ndef get_agent_pid_file_path(conf=__conf__):\n return conf.get(\"Pid.File\", \"/var/run/waagent.pid\")\n\n\ndef get_ext_log_dir(conf=__conf__):\n return conf.get(\"Extension.LogDir\", \"/var/log/azure\")\n\n\ndef get_openssl_cmd(conf=__conf__):\n return conf.get(\"OS.OpensslPath\", \"/usr/bin/openssl\")\n\n\ndef get_home_dir(conf=__conf__):\n return conf.get(\"OS.HomeDir\", \"/home\")\n\n\ndef get_passwd_file_path(conf=__conf__):\n return conf.get(\"OS.PasswordPath\", \"/etc/shadow\")\n\n\ndef get_sudoers_dir(conf=__conf__):\n return conf.get(\"OS.SudoersDir\", \"/etc/sudoers.d\")\n\n\ndef get_sshd_conf_file_path(conf=__conf__):\n return conf.get(\"OS.SshdConfigPath\", \"/etc/ssh/sshd_config\")\n\n\ndef get_root_device_scsi_timeout(conf=__conf__):\n return conf.get(\"OS.RootDeviceScsiTimeout\", None)\n\n\ndef get_ssh_host_keypair_type(conf=__conf__):\n return conf.get(\"Provisioning.SshHostKeyPairType\", \"rsa\")\n\n\ndef get_provision_enabled(conf=__conf__):\n return conf.get_switch(\"Provisioning.Enabled\", True)\n\n\ndef get_allow_reset_sys_user(conf=__conf__):\n return conf.get_switch(\"Provisioning.AllowResetSysUser\", False)",
"start_line": 1,
"end_line": 150,
"total_lines": 229,
"is_truncated": true
}Turn 3at 105 s439 tokens out8,458 prompt tokens
Yes, `get_lib_dir` defaults to `/var/lib/waagent`. Now I'll create a reproduction script. I'll mock `os.getcwd` and `conf.get_lib_dir` (or just create the directory and cd into it) to reproduce the `AttributeError`. Since I can run python scripts, I can just do this:
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nimport os\nimport sys\nfrom unittest.mock import patch\n\n# Mocking the environment to reproduce the issue\n# We need to import the module we want to test, but since it has top-level code\n# that calls set_current_agent(), we might need to use importlib or just mock\n# the dependencies before importing.\n\n# We'll mock os.getcwd() and azurelinuxagent.common.conf.get_lib_dir()\n# However, azurelinuxagent.common.version imports azurelinuxagent.common.conf.\n\n# Let's try to reproduce it by actually creating the directory\nos.makedirs('/tmp/waagent', exist_ok=True)\nos.makedirs('/tmp/waagent/events', exist_ok=True)\n\n# We need to monkeypatch azurelinuxagent.common.conf.get_lib_dir\n# But the module is already loaded maybe?\n# Let's use a script that mocks it before importing version.\n\nwith patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \\\n patch('os.getcwd', return_value='/tmp/waagent/events'):\n try:\n import azurelinuxagent.common.version\n print(\"Successfully imported azurelinuxagent.common.version\")\n except AttributeError as e:\n print(f\"Caught expected AttributeError: {e}\")\n except Exception as e:\n print(f\"Caught unexpected exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 136 characters
{
"status": "ok",
"stdout": "Caught expected AttributeError: 'NoneType' object has no attribute 'group'\n",
"stderr": "",
"exit_code": 0
}Turn 4at 159 s1,262 tokens out8,951 prompt tokens
Reproduction successful!
The fix is to check if the match is successful before calling `.group(1)`.
Looking at `azurelinuxagent/common/version.py`:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
return agent, FlexibleVersion(version)
```
I should change it to:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
return agent, FlexibleVersion(version)
```
Wait, if `match` fails, `agent` was something like `"events"`. I should reset `agent` to `AGENT_LONG_VERSION` to be consistent with the other branch.
Actually, if I'm in `/var/lib/waagent/events`, and `lib_dir` is `/var/lib/waagent/`, then `agent` becomes `"events"`.
If I don't reset `agent`, `set_current_agent` will return `("events", FlexibleVersion("2.2.2"))` if I just set `version = AGENT_VERSION`.
But in the other branch (`path[:len(lib_dir)] != lib_dir`), it returns `(AGENT_LONG_VERSION, FlexibleVersion(AGENT_VERSION))`.
So I should set:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Let's verify this logic.
If `path` = `/var/lib/waagent/WALinuxAgent-2.2.2/bin`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/var/lib/waagent/` (MATCH)
- `agent` = `path[len(lib_dir):].split(os.path.sep)[0]` = `"WALinuxAgent-2.2.2"`
- `match = AGENT_NAME_PATTERN.match("WALinuxAgent-2.2.2")` -> matches!
- `version` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
If `path` = `/var/lib/waagent/events`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/var/lib/waagent/` (MATCH)
- `agent` = `"events"`
- `match = AGENT_NAME_PATTERN.match("events")` -> None
- `agent` = `AGENT_LONG_VERSION` = `"WALinuxAgent-2.2.2"`
- `version` = `AGENT_VERSION` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
If `path` = `/tmp`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/tmp` (NO MATCH)
- `agent` = `AGENT_LONG_VERSION` = `"WALinuxAgent-2.2.2"`
- `version` = `AGENT_VERSION` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
This seems correct and covers all cases.
Let's apply the fix.
TOOL CALL · edit_file
{
"filepath": "azurelinuxagent/common/version.py",
"new_string": " else:\n agent = path[len(lib_dir):].split(os.path.sep)[0]\n match = AGENT_NAME_PATTERN.match(agent)\n if match:\n version = match.group(1)\n else:\n agent = AGENT_LONG_VERSION\n version = AGENT_VERSION\n return agent, FlexibleVersion(version)",
"old_string": " else:\n agent = path[len(lib_dir):].split(os.path.sep)[0]\n version = AGENT_NAME_PATTERN.match(agent).group(1)\n return agent, FlexibleVersion(version)"
}Result of edit_file 717 characters
{
"status": "ok",
"filepath": "azurelinuxagent/common/version.py",
"occurrences": 1,
"strategy": "exact",
"diff": "--- a/azurelinuxagent/common/version.py\n+++ b/azurelinuxagent/common/version.py\n@@ -117,7 +117,12 @@\n version = AGENT_VERSION\n else:\n agent = path[len(lib_dir):].split(os.path.sep)[0]\n- version = AGENT_NAME_PATTERN.match(agent).group(1)\n+ match = AGENT_NAME_PATTERN.match(agent)\n+ if match:\n+ version = match.group(1)\n+ else:\n+ agent = AGENT_LONG_VERSION\n+ version = AGENT_VERSION\n return agent, FlexibleVersion(version)\n CURRENT_AGENT, CURRENT_VERSION = set_current_agent()\n \n",
"is_truncated": false
}Turn 5at 173 s304 tokens out10,461 prompt tokens
Now I'll verify the fix with the reproduction script.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nimport os\nimport sys\nfrom unittest.mock import patch\n\n# Reset import of azurelinuxagent.common.version because it was already imported in previous runs\nif 'azurelinuxagent.common.version' in sys.modules:\n del sys.modules['azurelinuxagent.common.version']\n\nos.makedirs('/tmp/waagent', exist_ok=True)\nos.makedirs('/tmp/waagent/events', exist_ok=True)\n\nwith patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \\\n patch('os.getcwd', return_value='/tmp/waagent/events'):\n try:\n import azurelinuxagent.common.version\n print(\"Successfully imported azurelinuxagent.common.version\")\n print(f\"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}\")\n print(f\"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}\")\n except AttributeError as e:\n print(f\"Caught AttributeError: {e}\")\n except Exception as e:\n print(f\"Caught unexpected exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 173 characters
{
"status": "ok",
"stdout": "Successfully imported azurelinuxagent.common.version\nCURRENT_AGENT: WALinuxAgent-2.2.2\nCURRENT_VERSION: 2.2.2\n",
"stderr": "",
"exit_code": 0
}Turn 6at 184 s333 tokens out10,842 prompt tokens
The fix works for the case where the user is in a subdirectory of `/var/lib/waagent`. Now I should also verify that it still works when the user IS in a versioned agent directory.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nimport os\nimport sys\nfrom unittest.mock import patch\n\nif 'azurelinuxagent.common.version' in sys.modules:\n del sys.modules['azurelinuxagent.common.version']\n\nos.makedirs('/tmp/waagent', exist_ok=True)\nos.makedirs('/tmp/waagent/WALinuxAgent-2.2.2', exist_ok=True)\n\nwith patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \\\n patch('os.getcwd', return_value='/tmp/waagent/WALinuxAgent-2.2.2'):\n try:\n import azurelinuxagent.common.version\n print(\"Successfully imported azurelinuxagent.common.version\")\n print(f\"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}\")\n print(f\"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}\")\n except AttributeError as e:\n print(f\"Caught AttributeError: {e}\")\n except Exception as e:\n print(f\"Caught unexpected exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 173 characters
{
"status": "ok",
"stdout": "Successfully imported azurelinuxagent.common.version\nCURRENT_AGENT: WALinuxAgent-2.2.2\nCURRENT_VERSION: 2.2.2\n",
"stderr": "",
"exit_code": 0
}Turn 7at 204 s371 tokens out11,252 prompt tokens
Wait, in this case `CURRENT_AGENT` was `"WALinuxAgent-2.2.2"` and `CURRENT_VERSION` was `"2.2.2"`. Let's see if the version can be different. If `AGENT_VERSION` was `'2.2.2'` but the directory was `WALinuxAgent-2.3.0`.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nimport os\nimport sys\nfrom unittest.mock import patch\n\nif 'azurelinuxagent.common.version' in sys.modules:\n del sys.modules['azurelinuxagent.common.version']\n\nos.makedirs('/tmp/waagent', exist_ok=True)\nos.makedirs('/tmp/waagent/WALinuxAgent-2.3.0', exist_ok=True)\n\nwith patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \\\n patch('os.getcwd', return_value='/tmp/waagent/WALinuxAgent-2.3.0'):\n try:\n import azurelinuxagent.common.version\n print(\"Successfully imported azurelinuxagent.common.version\")\n print(f\"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}\")\n print(f\"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}\")\n except AttributeError as e:\n print(f\"Caught AttributeError: {e}\")\n except Exception as e:\n print(f\"Caught unexpected exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 173 characters
{
"status": "ok",
"stdout": "Successfully imported azurelinuxagent.common.version\nCURRENT_AGENT: WALinuxAgent-2.3.0\nCURRENT_VERSION: 2.3.0\n",
"stderr": "",
"exit_code": 0
}Turn 8at 218 s364 tokens out11,700 prompt tokens
Perfect. It correctly identifies the version from the directory name if it's in a versioned directory. Now let's check the case where it's in a versioned directory, but then goes deeper into it. E.g., `/tmp/waagent/WALinuxAgent-2.3.0/bin`
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nimport os\nimport sys\nfrom unittest.mock import patch\n\nif 'azurelinuxagent.common.version' in sys.modules:\n del sys.modules['azurelinuxagent.common.version']\n\nos.makedirs('/tmp/waagent', exist_ok=True)\nos.makedirs('/tmp/waagent/WALinuxAgent-2.3.0/bin', exist_ok=True)\n\nwith patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \\\n patch('os.getcwd', return_value='/tmp/waagent/WALinuxAgent-2.3.0/bin'):\n try:\n import azurelinuxagent.common.version\n print(\"Successfully imported azurelinuxagent.common.version\")\n print(f\"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}\")\n print(f\"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}\")\n except AttributeError as e:\n print(f\"Caught AttributeError: {e}\")\n except Exception as e:\n print(f\"Caught unexpected exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 173 characters
{
"status": "ok",
"stdout": "Successfully imported azurelinuxagent.common.version\nCURRENT_AGENT: WALinuxAgent-2.3.0\nCURRENT_VERSION: 2.3.0\n",
"stderr": "",
"exit_code": 0
}Turn 9at 228 s250 tokens out12,141 prompt tokens
Still works. Last case: not in `lib_dir` at all.
TOOL CALL · run_command
{
"command": "python3 - <<'PY'\nimport os\nimport sys\nfrom unittest.mock import patch\n\nif 'azurelinuxagent.common.version' in sys.modules:\n del sys.modules['azurelinuxagent.common.version']\n\nwith patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \\\n patch('os.getcwd', return_value='/tmp'):\n try:\n import azurelinuxagent.common.version\n print(\"Successfully imported azurelinuxagent.common.version\")\n print(f\"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}\")\n print(f\"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}\")\n except AttributeError as e:\n print(f\"Caught AttributeError: {e}\")\n except Exception as e:\n print(f\"Caught unexpected exception: {type(e).__name__}: {e}\")\nPY\n"
}Result of run_command 173 characters
{
"status": "ok",
"stdout": "Successfully imported azurelinuxagent.common.version\nCURRENT_AGENT: WALinuxAgent-2.2.2\nCURRENT_VERSION: 2.2.2\n",
"stderr": "",
"exit_code": 0
}Turn 10at 235 s77 tokens out12,468 prompt tokens
All cases seem to be handled correctly now. I'll check if there are any other places where similar logic might be used. I'll search for `AGENT_NAME_PATTERN` in the codebase.
TOOL CALL · run_command
{
"command": "grep -rn --include=\"*.py\" \"AGENT_NAME_PATTERN\" ."
}Result of run_command 467 characters
{
"status": "ok",
"stdout": "./azurelinuxagent/ga/update.py:46: AGENT_PATTERN, AGENT_NAME_PATTERN, AGENT_DIR_PATTERN, \\\n./azurelinuxagent/common/version.py:101:AGENT_NAME_PATTERN = re.compile(AGENT_PATTERN)\n./azurelinuxagent/common/version.py:120: match = AGENT_NAME_PATTERN.match(agent)\n./tests/common/test_version.py:64: version = AGENT_NAME_PATTERN.match(agent).group(1)\n",
"stderr": "",
"exit_code": 0
}Turn 11at 242 s94 tokens out12,711 prompt tokens
It's used in `azurelinuxagent/common/version.py` (which I fixed) and `azurelinuxagent/ga/update.py`. Let's see how it's used in `azurelinuxagent/ga/update.py`.
TOOL CALL · read_file
{
"end_line": 80,
"filepath": "azurelinuxagent/ga/update.py",
"start_line": 30
}Result of read_file 2,069 characters
{
"status": "ok",
"filepath": "azurelinuxagent/ga/update.py",
"content": "import zipfile\n\nimport azurelinuxagent.common.conf as conf\nimport azurelinuxagent.common.logger as logger\nimport azurelinuxagent.common.utils.fileutil as fileutil\nimport azurelinuxagent.common.utils.restutil as restutil\nimport azurelinuxagent.common.utils.textutil as textutil\n\nfrom azurelinuxagent.common.event import add_event, WALAEventOperation\nfrom azurelinuxagent.common.exception import UpdateError, ProtocolError\nfrom azurelinuxagent.common.future import ustr\nfrom azurelinuxagent.common.osutil import get_osutil\nfrom azurelinuxagent.common.protocol import get_protocol_util\nfrom azurelinuxagent.common.utils.flexible_version import FlexibleVersion\nfrom azurelinuxagent.common.version import AGENT_NAME, AGENT_VERSION, AGENT_LONG_VERSION, \\\n AGENT_DIR_GLOB, AGENT_PKG_GLOB, \\\n AGENT_PATTERN, AGENT_NAME_PATTERN, AGENT_DIR_PATTERN, \\\n CURRENT_AGENT, CURRENT_VERSION, \\\n is_current_agent_installed\n\nfrom azurelinuxagent.ga.exthandlers import HandlerManifest\n\n\nAGENT_ERROR_FILE = \"error.json\" # File name for agent error record\nAGENT_MANIFEST_FILE = \"HandlerManifest.json\"\n\nCHILD_HEALTH_INTERVAL = 15 * 60\nCHILD_LAUNCH_INTERVAL = 5 * 60\nCHILD_LAUNCH_RESTART_MAX = 3\nCHILD_POLL_INTERVAL = 60\n\nMAX_FAILURE = 3 # Max failure allowed for agent before blacklisted\nRETAIN_INTERVAL = 24 * 60 * 60 # Retain interval for black list\n\nGOAL_STATE_INTERVAL = 25\nREPORT_STATUS_INTERVAL = 15\n\nORPHAN_WAIT_INTERVAL = 15 * 60 * 60\n\nAGENT_SENTINAL_FILE = \"current_version\"\n\n\ndef get_update_handler():\n return UpdateHandler()\n\n\ndef get_python_cmd():\n major_version = platform.python_version_tuple()[0]\n return \"python\" if int(major_version) <= 2 else \"python{0}\".format(major_version)\n\n",
"start_line": 30,
"end_line": 80,
"total_lines": 883,
"is_truncated": false
}Turn 12at 247 s64 tokens out13,442 prompt tokens
It's imported, but not used immediately. Let's see where it is used in `azurelinuxagent/ga/update.py`.
TOOL CALL · run_command
{
"command": "grep -n \"AGENT_NAME_PATTERN\" azurelinuxagent/ga/update.py"
}Result of run_command 165 characters
{
"status": "ok",
"stdout": "46: AGENT_PATTERN, AGENT_NAME_PATTERN, AGENT_DIR_PATTERN, \\\n",
"stderr": "",
"exit_code": 0
}Turn 13at 251 s52 tokens out13,570 prompt tokens
It's only imported. Not used for matching. Let's check `tests/common/test_version.py`.
TOOL CALL · read_file
{
"filepath": "tests/common/test_version.py"
}Result of read_file 5,311 characters
{
"status": "ok",
"filepath": "tests/common/test_version.py",
"content": "# Copyright 2014 Microsoft Corporation\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n#\n# Requires Python 2.4+ and Openssl 1.0+\n#\n\nfrom __future__ import print_function\n\nimport copy\nimport glob\nimport json\nimport mock\nimport os\nimport platform\nimport random\nimport subprocess\nimport sys\nimport tempfile\nimport textwrap\nimport zipfile\n\nfrom tests.protocol.mockwiredata import *\nfrom tests.tools import *\n\nimport azurelinuxagent.common.conf as conf\nimport azurelinuxagent.common.logger as logger\nimport azurelinuxagent.common.utils.fileutil as fileutil\nimport azurelinuxagent.common.version as version\n\nfrom azurelinuxagent.common.utils.flexible_version import FlexibleVersion\nfrom azurelinuxagent.common.version import *\n\n\nclass TestCurrentAgentName(AgentTestCase):\n def setUp(self):\n AgentTestCase.setUp(self)\n return\n\n @patch(\"os.getcwd\", return_value=\"/default/install/directory\")\n def test_extract_name_finds_installed(self, mock_cwd):\n current_agent, current_version = set_current_agent()\n self.assertEqual(AGENT_LONG_VERSION, current_agent)\n self.assertEqual(AGENT_VERSION, str(current_version))\n return\n\n @patch(\"os.getcwd\")\n def test_extract_name_finds_latest_agent(self, mock_cwd):\n path = os.path.join(conf.get_lib_dir(), \"{0}-{1}\".format(\n AGENT_NAME,\n \"1.2.3\"))\n mock_cwd.return_value = path\n agent = os.path.basename(path)\n version = AGENT_NAME_PATTERN.match(agent).group(1)\n current_agent, current_version = set_current_agent()\n self.assertEqual(agent, current_agent)\n self.assertEqual(version, str(current_version))\n return\n\nclass TestGetF5Platforms(AgentTestCase):\n def test_get_f5_platform_bigip_12_1_1(self):\n version_file = textwrap.dedent(\"\"\"\n Product: BIG-IP\n Version: 12.1.1\n Build: 0.0.184\n Sequence: 12.1.1.0.0.184.0\n BaseBuild: 0.0.184\n Edition: Final\n Date: Thu Aug 11 17:09:01 PDT 2016\n Built: 160811170901\n Changelist: 1874858\n JobID: 705993\"\"\")\n\n mo = mock.mock_open(read_data=version_file)\n with patch(open_patch(), mo):\n platform = version.get_f5_platform()\n self.assertTrue(platform[0] == 'bigip')\n self.assertTrue(platform[1] == '12.1.1')\n self.assertTrue(platform[2] == 'bigip')\n self.assertTrue(platform[3] == 'BIG-IP')\n\n def test_get_f5_platform_bigip_12_1_0_hf1(self):\n version_file = textwrap.dedent(\"\"\"\n Product: BIG-IP\n Version: 12.1.0\n Build: 1.0.1447\n Sequence: 12.1.0.1.0.1447.0\n BaseBuild: 0.0.1434\n Edition: Hotfix HF1\n Date: Wed Jun 8 13:41:59 PDT 2016\n Built: 160608134159\n Changelist: 1773831\n JobID: 673467\"\"\")\n\n mo = mock.mock_open(read_data=version_file)\n with patch(open_patch(), mo):\n platform = version.get_f5_platform()\n self.assertTrue(platform[0] == 'bigip')\n self.assertTrue(platform[1] == '12.1.0')\n self.assertTrue(platform[2] == 'bigip')\n self.assertTrue(platform[3] == 'BIG-IP')\n\n def test_get_f5_platform_bigip_12_0_0(self):\n version_file = textwrap.dedent(\"\"\"\n Product: BIG-IP\n Version: 12.0.0\n Build: 0.0.606\n Sequence: 12.0.0.0.0.606.0\n BaseBuild: 0.0.606\n Edition: Final\n Date: Fri Aug 21 13:29:22 PDT 2015\n Built: 150821132922\n Changelist: 1486072\n JobID: 536212\"\"\")\n\n mo = mock.mock_open(read_data=version_file)\n with patch(open_patch(), mo):\n platform = version.get_f5_platform()\n self.assertTrue(platform[0] == 'bigip')\n self.assertTrue(platform[1] == '12.0.0')\n self.assertTrue(platform[2] == 'bigip')\n self.assertTrue(platform[3] == 'BIG-IP')\n\n def test_get_f5_platform_iworkflow_2_0_1(self):\n version_file = textwrap.dedent(\"\"\"\n Product: iWorkflow\n Version: 2.0.1\n Build: 0.0.9842\n Sequence: 2.0.1.0.0.9842.0\n BaseBuild: 0.0.9842\n Edition: Final\n Date: Sat Oct 1 22:52:08 PDT 2016\n Built: 161001225208\n Changelist: 1924048\n JobID: 734712\"\"\")\n\n mo = mock.mock_open(read_data=version_file)\n with patch(open_patch(), mo):\n platform = version.get_f5_platform()\n self.assertTrue(platform[0] == 'iworkflow')",
"start_line": 1,
"end_line": 150,
"total_lines": 174,
"is_truncated": true
}Turn 14at 255 s60 tokens out15,507 prompt tokens
The tests in `tests/common/test_version.py` should still pass. Let's run them.
TOOL CALL · run_command
{
"command": "pytest tests/common/test_version.py -q --tb=short --no-header"
}Result of run_command 1,794 characters
{
"status": "ok",
"stdout": "....... [100%]\n=============================== warnings summary ===============================\nazurelinuxagent/common/utils/flexible_version.py:24\ntests/common/test_version.py::TestCurrentAgentName::test_extract_name_finds_installed\ntests/common/test_version.py::TestCurrentAgentName::test_extract_name_finds_latest_agent\n /workspace/azurelinuxagent/common/utils/flexible_version.py:24: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.\n version.Version.__init__(self)\n\nazurelinuxagent/common/version.py:65\n /workspace/azurelinuxagent/common/version.py:65: DeprecationWarning: dist() and linux_distribution() functions are deprecated in Python 3.5\n supported_dists=platform._supported_dists+('alpine',)))\n\nazurelinuxagent/common/version.py:66\n /workspace/azurelinuxagent/common/version.py:66: DeprecationWarning: dist() and linux_distribution() functions are deprecated in Python 3.5\n full_name = platform.linux_distribution()[0].strip()\n\nazurelinuxagent/common/osutil/freebsd.py:232\n /workspace/azurelinuxagent/common/osutil/freebsd.py:232: DeprecationWarning: invalid escape sequence \\(\n cmd_search_dev=\"camcontrol devlist | grep {0} | awk -F \\( '{{print $2}}'|awk -F , '{{print $1}}'\".format(output)\n\nazurelinuxagent/common/osutil/freebsd.py:241\n /workspace/azurelinuxagent/common/osutil/freebsd.py:241: DeprecationWarning: invalid escape sequence \\(\n cmd_search_dev=\"camcontrol devlist | grep {0} | awk -F \\( '{{print $2}}'|awk -F , '{{print $1}}'\".format(output)\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n7 passed, 7 warnings in 0.10s\n",
"stderr": "",
"exit_code": 0
}Turn 15at 329 s75 tokens out5,139 prompt tokens
Tests passed. Now I will double check if there are any other files that might also have this problem. I'll search for `os.getcwd()` and `os.path.basename(getcwd())` (or similar) in the codebase.
TOOL CALL · run_command
{
"command": "grep -rn \"os.getcwd()\" ."
}Result of run_command 582 characters
{
"status": "ok",
"stdout": "./azurelinuxagent/ga/update.py:119: agent_dir = os.getcwd()\n./azurelinuxagent/common/version.py:111: path = os.getcwd()\n./makepkg.py:51:output_path = os.path.join(os.getcwd(), \"eggs\")\n./makepkg.py:107:cwd = os.getcwd()\n./tests/ga/test_update.py:1097: self.assertEqual(os.getcwd(), kwargs['cwd'])\n./tests/data/ext/sample_ext/sample.py:8: config_dir = os.path.join(os.getcwd(), \"config\")\n./tests/data/ext/sample_ext/sample.py:32: status_path = os.path.join(os.getcwd(), \"status\")\n",
"stderr": "",
"exit_code": 0
}Turn 16at 333 s60 tokens out5,452 prompt tokens
`azurelinuxagent/ga/update.py:119` might be interesting.
TOOL CALL · read_file
{
"end_line": 130,
"filepath": "azurelinuxagent/ga/update.py",
"start_line": 110
}Result of read_file 1,084 characters
{
"status": "ok",
"filepath": "azurelinuxagent/ga/update.py",
"content": " raise Exception(\"Illegal attempt to launch multiple goal state Agent processes\")\n\n if self.signal_handler is None:\n self.signal_handler = signal.signal(signal.SIGTERM, self.forward_signal)\n\n latest_agent = self.get_latest_agent()\n if latest_agent is None:\n logger.info(u\"Installed Agent {0} is the most current agent\", CURRENT_AGENT)\n agent_cmd = \"python -u {0} -run-exthandlers\".format(sys.argv[0])\n agent_dir = os.getcwd()\n agent_name = CURRENT_AGENT\n agent_version = CURRENT_VERSION\n else:\n logger.info(u\"Determined Agent {0} to be the latest agent\", latest_agent.name)\n agent_cmd = latest_agent.get_agent_cmd()\n agent_dir = latest_agent.get_agent_dir()\n agent_name = latest_agent.name\n agent_version = latest_agent.version\n\n try:\n",
"start_line": 110,
"end_line": 130,
"total_lines": 883,
"is_truncated": false
}Turn 17at 343 s122 tokens out5,841 prompt tokens
Wait, `azurelinuxagent/ga/update.py` at line 119 uses `os.getcwd()`, but it doesn't seem to be parsing the version from it. It's just setting `agent_dir = os.getcwd()`. Let's check `azurelinuxagent/common/version.py` once more for any other `AGENT_NAME_PATTERN.match` usage.
TOOL CALL · run_command
{
"command": "grep -rn \"AGENT_NAME_PATTERN\" azurelinuxagent/common/version.py"
}Result of run_command 165 characters
{
"status": "ok",
"stdout": "101:AGENT_NAME_PATTERN = re.compile(AGENT_PATTERN)\n120: match = AGENT_NAME_PATTERN.match(agent)\n",
"stderr": "",
"exit_code": 0
}Turn 18at 352 s108 tokens out6,039 prompt tokens
Only one place. I think I'm good. I have: 1. Reproduced the bug with a script. 2. Fixed the bug by adding a check for `None` on the regex match. 3. Verified the fix with the reproduction script. 4. Verified that existing tests still pass. 5. Checked if other parts of the code were affected. Final check of the diff.
TOOL CALL · run_command
{
"command": "git status --short && git diff"
}Result of run_command 816 characters
{
"status": "ok",
"stdout": " M azurelinuxagent/common/version.py\ndiff --git a/azurelinuxagent/common/version.py b/azurelinuxagent/common/version.py\nindex 1099e25..ac58b50 100644\n--- a/azurelinuxagent/common/version.py\n+++ b/azurelinuxagent/common/version.py\n@@ -117,7 +117,12 @@ def set_current_agent():\n version = AGENT_VERSION\n else:\n agent = path[len(lib_dir):].split(os.path.sep)[0]\n- version = AGENT_NAME_PATTERN.match(agent).group(1)\n+ match = AGENT_NAME_PATTERN.match(agent)\n+ if match:\n+ version = match.group(1)\n+ else:\n+ agent = AGENT_LONG_VERSION\n+ version = AGENT_VERSION\n return agent, FlexibleVersion(version)\n CURRENT_AGENT, CURRENT_VERSION = set_current_agent()\n \n",
"stderr": "",
"exit_code": 0
}Turn 19at 394 s518 tokens out6,444 prompt tokens
Wait, in my `edit_file`, I used:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Wait, if `match` is None, I set `agent = AGENT_LONG_VERSION`.
Is that correct?
In the original code:
```python
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
```
If the `else` block is entered, it means `path.startswith(lib_dir)` is True.
`agent` is extracted from the path.
Then it tried to get the version from `agent`.
If the regex match fails, it means `agent` is not a versioned directory.
In that case, we should probably fall back to the default `AGENT_LONG_VERSION` and `AGENT_VERSION`.
My fix:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Yes, this looks correct. It overrides `agent` and `version` with the defaults if the regex doesn't match.
Wait, there is one detail: `FlexibleVersion(version)`.
If `version = AGENT_VERSION`, then `FlexibleVersion(AGENT_VERSION)` is called.
`AGENT_VERSION` is "TBD", which `FlexibleVersion` can handle.
One more check: if `match` fails, should I still use the `agent` extracted from the path?
No, because the return value `agent` is expected to be the long version (e.g., `WALinuxAgent-someversion`).
If we are in `/var/lib/waagent/events`, `agent` would be `events`.
Returning `('events', FlexibleVersion('TBD'))` would be wrong.
Returning `(AGENT_LONG_VERSION, FlexibleVersion(AGENT_VERSION))` is correct.
Looks solid.
TOOL CALL · submit_patch
Result of submit_patch 55 characters
{
"status": "ok",
"patch_size": 700,
"files_changed": 1
}Turn 20at 405 s169 tokens out7,001 prompt tokens
Thinking process finished.
Turn 21at 405 s
The issue was caused by `set_current_agent()` in `azurelinuxagent/common/version.py` assuming that any subdirectory under the agent's library directory must follow the naming pattern `WALinuxAgent-<version>`. When the current working directory was a non-versioned subdirectory (e.g., `/var/lib/waagent/events`), a regex match failed and returned `None`, leading to an `AttributeError` when attempting to access `.group(1)`. The fix introduces a check to verify if the regex match was successful. If no match is found, the function falls back to using the default `AGENT_LONG_VERSION` and `AGENT_VERSION`. This ensures that the agent can be executed from any directory within its library path without crashing.
Model calls (not matched to turns)
Generated tokens 336 tokens · stopped: STOP
The user is reporting a bug where running `waagent` commands fails when the current working directory is under `/var/lib/waagent`.
The traceback shows the failure happens in `azurelinuxagent/common/version.py` in the `set_current_agent` function.
Specifically:
```python
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 87, in <module>
CURRENT_AGENT, CURRENT_VERSION = set_current_agent()
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 85, in set_current_agent
version = AGENT_NAME_PATTERN.match(agent).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
```
It seems `AGENT_NAME_PATTERN.match(agent)` is returning `None`, and then `.group(1)` is called on it.
This happens in `set_current_agent()` in `azurelinuxagent/common/version.py`.
I need to examine `azurelinuxagent/common/version.py` to understand how `set_current_agent` is implemented and why it fails when the CWD is under `/var/lib/waagent`.
Let's start by reading `azurelinuxagent/common/version.py`.<|channel>thought
The user is reporting a bug where running `waagent` commands fails when the current working directory is under `/var/lib/waagent`.
The traceback shows the failure happens in `azurelinuxagent/common/version.py` in the `set_current_agent` function.
Specifically:
```python
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 87, in <module>
CURRENT_AGENT, CURRENT_VERSION = set_current_agent()
File "/usr/lib/python2.7/site-packages/azurelinuxagent/common/version.py", line 85, in set_current_agent
version = AGENT_NAME_PATTERN.match(agent).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
```
It seems `AGENT_NAME_PATTERN.match(agent)` is returning `None`, and then `.group(1)` is called on it.
This happens in `set_current_agent()` in `azurelinuxagent/common/version.py`.
I need to examine `azurelinuxagent/common/version.py` to understand how `set_current_agent` is implemented and why it fails when the CWD is under `/var/lib/waagent`.
Let's start by reading `azurelinuxagent/common/version.py`.<channel|><|tool_call>call:read_file{filepath:<|"|>azurelinuxagent/common/version.py<|"|>}<tool_call|><|tool_response>
Generated tokens 927 tokens · stopped: STOP
The problematic code is in `set_current_agent()`:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
return agent, FlexibleVersion(version)
```
Wait, look at the logic:
1. `path = os.getcwd()`
2. `lib_dir = conf.get_lib_dir()`
3. If `path` does not start with `lib_dir`, it uses `AGENT_LONG_VERSION` and `AGENT_VERSION`.
4. If `path` DOES start with `lib_dir`, it assumes that the directory structure is `lib_dir/WALinuxAgent-version/...`.
`agent = path[len(lib_dir):].split(os.path.sep)[0]`
And then it tries to match `agent` with `AGENT_NAME_PATTERN = re.compile("WALinuxAgent-(.*)")`.
The problem description says:
"Cannot run waagent command (such as: waagent -version, waagent -deprovision...) inside the any folder under /var/lib/waagent (such as: /var/lib/waagent/events)"
If `conf.get_lib_dir()` returns `/var/lib/waagent`, and the current directory is `/var/lib/waagent/events`:
- `path` = `/var/lib/waagent/events`
- `lib_dir` = `/var/lib/waagent/` (after adding separator)
- `path[:len(lib_dir)]` is `/var/lib/waagent/`, which equals `lib_dir`.
- `path[len(lib_dir):]` is `events`.
- `agent = "events".split('/')[0]` is `"events"`.
- `AGENT_NAME_PATTERN.match("events")` is `None`.
- `None.group(1)` raises `AttributeError: 'NoneType' object has no attribute 'group'`.
So the assumption is that if you are inside `lib_dir`, you must be in a versioned agent directory. But you could just be in a subdirectory of `lib_dir` that isn't a versioned agent directory (like `/var/lib/waagent/events`).
To fix this, we should check if `AGENT_NAME_PATTERN.match(agent)` is actually successful before calling `.group(1)`. If not, we should probably fall back to `AGENT_LONG_VERSION` and `AGENT_VERSION`.
Wait, if the agent is installed in `/var/lib/waagent` and the code is running from there, the purpose of this logic seems to be to detect which version of the agent is currently executing if it's running from a versioned directory (maybe for updates?).
If `agent` doesn't match the pattern, it means we aren't in a versioned directory. In that case, we should use the defaults.
Let's see what `AGENT_LONG_VERSION` and `AGENT_VERSION` are.
`AGENT_NAME = "WALinuxAgent"`
`AGENT_VERSION = '2.2.2'`
`AGENT_LONG_VERSION = "WALinuxAgent-2.2.2"`
The logic should be:
If `path` starts with `lib_dir`, try to extract the version. If extraction fails, use the default.
Let's try to reproduce this first.
I need to know what `conf.get_lib_dir()` returns.
Looking at `azurelinuxagent/common/conf.py` might help.
The problematic code is in `set_current_agent()`:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
return agent, FlexibleVersion(version)
```
Wait, look at the logic:
1. `path = os.getcwd()`
2. `lib_dir = conf.get_lib_dir()`
3. If `path` does not start with `lib_dir`, it uses `AGENT_LONG_VERSION` and `AGENT_VERSION`.
4. If `path` DOES start with `lib_dir`, it assumes that the directory structure is `lib_dir/WALinuxAgent-version/...`.
`agent = path[len(lib_dir):].split(os.path.sep)[0]`
And then it tries to match `agent` with `AGENT_NAME_PATTERN = re.compile("WALinuxAgent-(.*)")`.
The problem description says:
"Cannot run waagent command (such as: waagent -version, waagent -deprovision...) inside the any folder under /var/lib/waagent (such as: /var/lib/waagent/events)"
If `conf.get_lib_dir()` returns `/var/lib/waagent`, and the current directory is `/var/lib/waagent/events`:
- `path` = `/var/lib/waagent/events`
- `lib_dir` = `/var/lib/waagent/` (after adding separator)
- `path[:len(lib_dir)]` is `/var/lib/waagent/`, which equals `lib_dir`.
- `path[len(lib_dir):]` is `events`.
- `agent = "events".split('/')[0]` is `"events"`.
- `AGENT_NAME_PATTERN.match("events")` is `None`.
- `None.group(1)` raises `AttributeError: 'NoneType' object has no attribute 'group'`.
So the assumption is that if you are inside `lib_dir`, you must be in a versioned agent directory. But you could just be in a subdirectory of `lib_dir` that isn't a versioned agent directory (like `/var/lib/waagent/events`).
To fix this, we should check if `AGENT_NAME_PATTERN.match(agent)` is actually successful before calling `.group(1)`. If not, we should probably fall back to `AGENT_LONG_VERSION` and `AGENT_VERSION`.
Wait, if the agent is installed in `/var/lib/waagent` and the code is running from there, the purpose of this logic seems to be to detect which version of the agent is currently executing if it's running from a versioned directory (maybe for updates?).
If `agent` doesn't match the pattern, it means we aren't in a versioned directory. In that case, we should use the defaults.
Let's see what `AGENT_LONG_VERSION` and `AGENT_VERSION` are.
`AGENT_NAME = "WALinuxAgent"`
`AGENT_VERSION = '2.2.2'`
`AGENT_LONG_VERSION = "WALinuxAgent-2.2.2"`
The logic should be:
If `path` starts with `lib_dir`, try to extract the version. If extraction fails, use the default.
Let's try to reproduce this first.
I need to know what `conf.get_lib_dir()` returns.
Looking at `azurelinuxagent/common/conf.py` might help.
<channel|><|tool_call>call:read_file{filepath:<|"|>azurelinuxagent/common/conf.py<|"|>}<tool_call|><|tool_response>
Generated tokens 439 tokens · stopped: STOP
Yes, `get_lib_dir` defaults to `/var/lib/waagent`. Now I'll create a reproduction script. I'll mock `os.getcwd` and `conf.get_lib_dir` (or just create the directory and cd into it) to reproduce the `AttributeError`. Since I can run python scripts, I can just do this:
Yes, `get_lib_dir` defaults to `/var/lib/waagent`.
Now I'll create a reproduction script.
I'll mock `os.getcwd` and `conf.get_lib_dir` (or just create the directory and cd into it) to reproduce the `AttributeError`.
Since I can run python scripts, I can just do this:
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
import os
import sys
from unittest.mock import patch
# Mocking the environment to reproduce the issue
# We need to import the module we want to test, but since it has top-level code
# that calls set_current_agent(), we might need to use importlib or just mock
# the dependencies before importing.
# We'll mock os.getcwd() and azurelinuxagent.common.conf.get_lib_dir()
# However, azurelinuxagent.common.version imports azurelinuxagent.common.conf.
# Let's try to reproduce it by actually creating the directory
os.makedirs('/tmp/waagent', exist_ok=True)
os.makedirs('/tmp/waagent/events', exist_ok=True)
# We need to monkeypatch azurelinuxagent.common.conf.get_lib_dir
# But the module is already loaded maybe?
# Let's use a script that mocks it before importing version.
with patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \
patch('os.getcwd', return_value='/tmp/waagent/events'):
try:
import azurelinuxagent.common.version
print("Successfully imported azurelinuxagent.common.version")
except AttributeError as e:
print(f"Caught expected AttributeError: {e}")
except Exception as e:
print(f"Caught unexpected exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 1,262 tokens · stopped: STOP
Reproduction successful!
The fix is to check if the match is successful before calling `.group(1)`.
Looking at `azurelinuxagent/common/version.py`:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
return agent, FlexibleVersion(version)
```
I should change it to:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
return agent, FlexibleVersion(version)
```
Wait, if `match` fails, `agent` was something like `"events"`. I should reset `agent` to `AGENT_LONG_VERSION` to be consistent with the other branch.
Actually, if I'm in `/var/lib/waagent/events`, and `lib_dir` is `/var/lib/waagent/`, then `agent` becomes `"events"`.
If I don't reset `agent`, `set_current_agent` will return `("events", FlexibleVersion("2.2.2"))` if I just set `version = AGENT_VERSION`.
But in the other branch (`path[:len(lib_dir)] != lib_dir`), it returns `(AGENT_LONG_VERSION, FlexibleVersion(AGENT_VERSION))`.
So I should set:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Let's verify this logic.
If `path` = `/var/lib/waagent/WALinuxAgent-2.2.2/bin`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/var/lib/waagent/` (MATCH)
- `agent` = `path[len(lib_dir):].split(os.path.sep)[0]` = `"WALinuxAgent-2.2.2"`
- `match = AGENT_NAME_PATTERN.match("WALinuxAgent-2.2.2")` -> matches!
- `version` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
If `path` = `/var/lib/waagent/events`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/var/lib/waagent/` (MATCH)
- `agent` = `"events"`
- `match = AGENT_NAME_PATTERN.match("events")` -> None
- `agent` = `AGENT_LONG_VERSION` = `"WALinuxAgent-2.2.2"`
- `version` = `AGENT_VERSION` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
If `path` = `/tmp`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/tmp` (NO MATCH)
- `agent` = `AGENT_LONG_VERSION` = `"WALinuxAgent-2.2.2"`
- `version` = `AGENT_VERSION` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
This seems correct and covers all cases.
Let's apply the fix.
Reproduction successful!
The fix is to check if the match is successful before calling `.group(1)`.
Looking at `azurelinuxagent/common/version.py`:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
return agent, FlexibleVersion(version)
```
I should change it to:
```python
def set_current_agent():
path = os.getcwd()
lib_dir = conf.get_lib_dir()
if lib_dir[-1] != os.path.sep:
lib_dir += os.path.sep
if path[:len(lib_dir)] != lib_dir:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
return agent, FlexibleVersion(version)
```
Wait, if `match` fails, `agent` was something like `"events"`. I should reset `agent` to `AGENT_LONG_VERSION` to be consistent with the other branch.
Actually, if I'm in `/var/lib/waagent/events`, and `lib_dir` is `/var/lib/waagent/`, then `agent` becomes `"events"`.
If I don't reset `agent`, `set_current_agent` will return `("events", FlexibleVersion("2.2.2"))` if I just set `version = AGENT_VERSION`.
But in the other branch (`path[:len(lib_dir)] != lib_dir`), it returns `(AGENT_LONG_VERSION, FlexibleVersion(AGENT_VERSION))`.
So I should set:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Let's verify this logic.
If `path` = `/var/lib/waagent/WALinuxAgent-2.2.2/bin`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/var/lib/waagent/` (MATCH)
- `agent` = `path[len(lib_dir):].split(os.path.sep)[0]` = `"WALinuxAgent-2.2.2"`
- `match = AGENT_NAME_PATTERN.match("WALinuxAgent-2.2.2")` -> matches!
- `version` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
If `path` = `/var/lib/waagent/events`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/var/lib/waagent/` (MATCH)
- `agent` = `"events"`
- `match = AGENT_NAME_PATTERN.match("events")` -> None
- `agent` = `AGENT_LONG_VERSION` = `"WALinuxAgent-2.2.2"`
- `version` = `AGENT_VERSION` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
If `path` = `/tmp`, `lib_dir` = `/var/lib/waagent/`:
- `path[:len(lib_dir)]` is `/tmp` (NO MATCH)
- `agent` = `AGENT_LONG_VERSION` = `"WALinuxAgent-2.2.2"`
- `version` = `AGENT_VERSION` = `"2.2.2"`
- returns `("WALinuxAgent-2.2.2", FlexibleVersion("2.2.2"))`
This seems correct and covers all cases.
Let's apply the fix.
<channel|><|tool_call>call:edit_file{filepath:<|"|>azurelinuxagent/common/version.py<|"|>,new_string:<|"|> else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
return agent, FlexibleVersion(version)<|"|>,old_string:<|"|> else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
return agent, FlexibleVersion(version)<|"|>}<tool_call|><|tool_response>
Generated tokens 304 tokens · stopped: STOP
Now I'll verify the fix with the reproduction script.
Now I'll verify the fix with the reproduction script.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
import os
import sys
from unittest.mock import patch
# Reset import of azurelinuxagent.common.version because it was already imported in previous runs
if 'azurelinuxagent.common.version' in sys.modules:
del sys.modules['azurelinuxagent.common.version']
os.makedirs('/tmp/waagent', exist_ok=True)
os.makedirs('/tmp/waagent/events', exist_ok=True)
with patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \
patch('os.getcwd', return_value='/tmp/waagent/events'):
try:
import azurelinuxagent.common.version
print("Successfully imported azurelinuxagent.common.version")
print(f"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}")
print(f"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}")
except AttributeError as e:
print(f"Caught AttributeError: {e}")
except Exception as e:
print(f"Caught unexpected exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 333 tokens · stopped: STOP
The fix works for the case where the user is in a subdirectory of `/var/lib/waagent`. Now I should also verify that it still works when the user IS in a versioned agent directory.
The fix works for the case where the user is in a subdirectory of `/var/lib/waagent`.
Now I should also verify that it still works when the user IS in a versioned agent directory.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
import os
import sys
from unittest.mock import patch
if 'azurelinuxagent.common.version' in sys.modules:
del sys.modules['azurelinuxagent.common.version']
os.makedirs('/tmp/waagent', exist_ok=True)
os.makedirs('/tmp/waagent/WALinuxAgent-2.2.2', exist_ok=True)
with patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \
patch('os.getcwd', return_value='/tmp/waagent/WALinuxAgent-2.2.2'):
try:
import azurelinuxagent.common.version
print("Successfully imported azurelinuxagent.common.version")
print(f"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}")
print(f"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}")
except AttributeError as e:
print(f"Caught AttributeError: {e}")
except Exception as e:
print(f"Caught unexpected exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 371 tokens · stopped: STOP
Wait, in this case `CURRENT_AGENT` was `"WALinuxAgent-2.2.2"` and `CURRENT_VERSION` was `"2.2.2"`. Let's see if the version can be different. If `AGENT_VERSION` was `'2.2.2'` but the directory was `WALinuxAgent-2.3.0`.
Wait, in this case `CURRENT_AGENT` was `"WALinuxAgent-2.2.2"` and `CURRENT_VERSION` was `"2.2.2"`.
Let's see if the version can be different.
If `AGENT_VERSION` was `'2.2.2'` but the directory was `WALinuxAgent-2.3.0`.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
import os
import sys
from unittest.mock import patch
if 'azurelinuxagent.common.version' in sys.modules:
del sys.modules['azurelinuxagent.common.version']
os.makedirs('/tmp/waagent', exist_ok=True)
os.makedirs('/tmp/waagent/WALinuxAgent-2.3.0', exist_ok=True)
with patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \
patch('os.getcwd', return_value='/tmp/waagent/WALinuxAgent-2.3.0'):
try:
import azurelinuxagent.common.version
print("Successfully imported azurelinuxagent.common.version")
print(f"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}")
print(f"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}")
except AttributeError as e:
print(f"Caught AttributeError: {e}")
except Exception as e:
print(f"Caught unexpected exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 364 tokens · stopped: STOP
Perfect. It correctly identifies the version from the directory name if it's in a versioned directory. Now let's check the case where it's in a versioned directory, but then goes deeper into it. E.g., `/tmp/waagent/WALinuxAgent-2.3.0/bin`
Perfect. It correctly identifies the version from the directory name if it's in a versioned directory.
Now let's check the case where it's in a versioned directory, but then goes deeper into it.
E.g., `/tmp/waagent/WALinuxAgent-2.3.0/bin`
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
import os
import sys
from unittest.mock import patch
if 'azurelinuxagent.common.version' in sys.modules:
del sys.modules['azurelinuxagent.common.version']
os.makedirs('/tmp/waagent', exist_ok=True)
os.makedirs('/tmp/waagent/WALinuxAgent-2.3.0/bin', exist_ok=True)
with patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \
patch('os.getcwd', return_value='/tmp/waagent/WALinuxAgent-2.3.0/bin'):
try:
import azurelinuxagent.common.version
print("Successfully imported azurelinuxagent.common.version")
print(f"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}")
print(f"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}")
except AttributeError as e:
print(f"Caught AttributeError: {e}")
except Exception as e:
print(f"Caught unexpected exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 250 tokens · stopped: STOP
Still works. Last case: not in `lib_dir` at all.
Still works.
Last case: not in `lib_dir` at all.
<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY'
import os
import sys
from unittest.mock import patch
if 'azurelinuxagent.common.version' in sys.modules:
del sys.modules['azurelinuxagent.common.version']
with patch('azurelinuxagent.common.conf.get_lib_dir', return_value='/tmp/waagent'), \
patch('os.getcwd', return_value='/tmp'):
try:
import azurelinuxagent.common.version
print("Successfully imported azurelinuxagent.common.version")
print(f"CURRENT_AGENT: {azurelinuxagent.common.version.CURRENT_AGENT}")
print(f"CURRENT_VERSION: {azurelinuxagent.common.version.CURRENT_VERSION}")
except AttributeError as e:
print(f"Caught AttributeError: {e}")
except Exception as e:
print(f"Caught unexpected exception: {type(e).__name__}: {e}")
PY
<|"|>}<tool_call|><|tool_response>
Generated tokens 77 tokens · stopped: STOP
All cases seem to be handled correctly now. I'll check if there are any other places where similar logic might be used. I'll search for `AGENT_NAME_PATTERN` in the codebase.
All cases seem to be handled correctly now.
I'll check if there are any other places where similar logic might be used.
I'll search for `AGENT_NAME_PATTERN` in the codebase.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "AGENT_NAME_PATTERN" .<|"|>}<tool_call|><|tool_response>
Generated tokens 94 tokens · stopped: STOP
It's used in `azurelinuxagent/common/version.py` (which I fixed) and `azurelinuxagent/ga/update.py`. Let's see how it's used in `azurelinuxagent/ga/update.py`.
It's used in `azurelinuxagent/common/version.py` (which I fixed) and `azurelinuxagent/ga/update.py`.
Let's see how it's used in `azurelinuxagent/ga/update.py`.
<channel|><|tool_call>call:read_file{filepath:<|"|>azurelinuxagent/ga/update.py<|"|>,start_line:30,end_line:80}<tool_call|><|tool_response>
Generated tokens 64 tokens · stopped: STOP
It's imported, but not used immediately. Let's see where it is used in `azurelinuxagent/ga/update.py`.
It's imported, but not used immediately. Let's see where it is used in `azurelinuxagent/ga/update.py`.<channel|><|tool_call>call:run_command{command:<|"|>grep -n "AGENT_NAME_PATTERN" azurelinuxagent/ga/update.py<|"|>}<tool_call|><|tool_response>
Generated tokens 52 tokens · stopped: STOP
It's only imported. Not used for matching. Let's check `tests/common/test_version.py`.
It's only imported. Not used for matching.
Let's check `tests/common/test_version.py`.
<channel|><|tool_call>call:read_file{filepath:<|"|>tests/common/test_version.py<|"|>}<tool_call|><|tool_response>
Generated tokens 60 tokens · stopped: STOP
The tests in `tests/common/test_version.py` should still pass. Let's run them.
The tests in `tests/common/test_version.py` should still pass.
Let's run them.<channel|><|tool_call>call:run_command{command:<|"|>pytest tests/common/test_version.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Generated tokens 75 tokens · stopped: STOP
Tests passed. Now I will double check if there are any other files that might also have this problem. I'll search for `os.getcwd()` and `os.path.basename(getcwd())` (or similar) in the codebase.
Tests passed. Now I will double check if there are any other files that might also have this problem. I'll search for `os.getcwd()` and `os.path.basename(getcwd())` (or similar) in the codebase.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "os.getcwd()" .<|"|>}<tool_call|><|tool_response>
Generated tokens 60 tokens · stopped: STOP
`azurelinuxagent/ga/update.py:119` might be interesting.
`azurelinuxagent/ga/update.py:119` might be interesting.
<channel|><|tool_call>call:read_file{filepath:<|"|>azurelinuxagent/ga/update.py<|"|>,start_line:110,end_line:130}<tool_call|><|tool_response>
Generated tokens 122 tokens · stopped: STOP
Wait, `azurelinuxagent/ga/update.py` at line 119 uses `os.getcwd()`, but it doesn't seem to be parsing the version from it. It's just setting `agent_dir = os.getcwd()`. Let's check `azurelinuxagent/common/version.py` once more for any other `AGENT_NAME_PATTERN.match` usage.
Wait, `azurelinuxagent/ga/update.py` at line 119 uses `os.getcwd()`, but it doesn't seem to be parsing the version from it. It's just setting `agent_dir = os.getcwd()`.
Let's check `azurelinuxagent/common/version.py` once more for any other `AGENT_NAME_PATTERN.match` usage.
<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "AGENT_NAME_PATTERN" azurelinuxagent/common/version.py<|"|>}<tool_call|><|tool_response>
Generated tokens 108 tokens · stopped: STOP
Only one place. I think I'm good. I have: 1. Reproduced the bug with a script. 2. Fixed the bug by adding a check for `None` on the regex match. 3. Verified the fix with the reproduction script. 4. Verified that existing tests still pass. 5. Checked if other parts of the code were affected. Final check of the diff.
Only one place.
I think I'm good. I have:
1. Reproduced the bug with a script.
2. Fixed the bug by adding a check for `None` on the regex match.
3. Verified the fix with the reproduction script.
4. Verified that existing tests still pass.
5. Checked if other parts of the code were affected.
Final check of the diff.
<channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>
Generated tokens 518 tokens · stopped: STOP
Wait, in my `edit_file`, I used:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Wait, if `match` is None, I set `agent = AGENT_LONG_VERSION`.
Is that correct?
In the original code:
```python
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
```
If the `else` block is entered, it means `path.startswith(lib_dir)` is True.
`agent` is extracted from the path.
Then it tried to get the version from `agent`.
If the regex match fails, it means `agent` is not a versioned directory.
In that case, we should probably fall back to the default `AGENT_LONG_VERSION` and `AGENT_VERSION`.
My fix:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Yes, this looks correct. It overrides `agent` and `version` with the defaults if the regex doesn't match.
Wait, there is one detail: `FlexibleVersion(version)`.
If `version = AGENT_VERSION`, then `FlexibleVersion(AGENT_VERSION)` is called.
`AGENT_VERSION` is "TBD", which `FlexibleVersion` can handle.
One more check: if `match` fails, should I still use the `agent` extracted from the path?
No, because the return value `agent` is expected to be the long version (e.g., `WALinuxAgent-someversion`).
If we are in `/var/lib/waagent/events`, `agent` would be `events`.
Returning `('events', FlexibleVersion('TBD'))` would be wrong.
Returning `(AGENT_LONG_VERSION, FlexibleVersion(AGENT_VERSION))` is correct.
Looks solid.
Wait, in my `edit_file`, I used:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Wait, if `match` is None, I set `agent = AGENT_LONG_VERSION`.
Is that correct?
In the original code:
```python
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
version = AGENT_NAME_PATTERN.match(agent).group(1)
```
If the `else` block is entered, it means `path.startswith(lib_dir)` is True.
`agent` is extracted from the path.
Then it tried to get the version from `agent`.
If the regex match fails, it means `agent` is not a versioned directory.
In that case, we should probably fall back to the default `AGENT_LONG_VERSION` and `AGENT_VERSION`.
My fix:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
version = match.group(1)
else:
agent = AGENT_LONG_VERSION
version = AGENT_VERSION
```
Yes, this looks correct. It overrides `agent` and `version` with the defaults if the regex doesn't match.
Wait, there is one detail: `FlexibleVersion(version)`.
If `version = AGENT_VERSION`, then `FlexibleVersion(AGENT_VERSION)` is called.
`AGENT_VERSION` is "TBD", which `FlexibleVersion` can handle.
One more check: if `match` fails, should I still use the `agent` extracted from the path?
No, because the return value `agent` is expected to be the long version (e.g., `WALinuxAgent-someversion`).
If we are in `/var/lib/waagent/events`, `agent` would be `events`.
Returning `('events', FlexibleVersion('TBD'))` would be wrong.
Returning `(AGENT_LONG_VERSION, FlexibleVersion(AGENT_VERSION))` is correct.
Looks solid.
<channel|><|tool_call>call:submit_patch{}<tool_call|><|tool_response>
Patch, tests and logs
Final code change Included
diff --git a/azurelinuxagent/common/version.py b/azurelinuxagent/common/version.py
index 1099e25..ac58b50 100644
--- a/azurelinuxagent/common/version.py
+++ b/azurelinuxagent/common/version.py
@@ -117,7 +117,12 @@ def set_current_agent():
version = AGENT_VERSION
else:
agent = path[len(lib_dir):].split(os.path.sep)[0]
- version = AGENT_NAME_PATTERN.match(agent).group(1)
+ match = AGENT_NAME_PATTERN.match(agent)
+ if match:
+ version = match.group(1)
+ else:
+ agent = AGENT_LONG_VERSION
+ version = AGENT_VERSION
return agent, FlexibleVersion(version)
CURRENT_AGENT, CURRENT_VERSION = set_current_agent()
Test output Included
============================= test session starts ============================== collected 9 items tests/common/test_version.py ......... [100%] ==================================== PASSES ==================================== - generated xml file: /tmp/rebench-grade-f27c93a63c234ffab8736aa3c2242369.xml -- =========================== short test summary info ============================ PASSED tests/common/test_version.py::TestCurrentAgentName::test_extract_name_finds_installed PASSED tests/common/test_version.py::TestCurrentAgentName::test_extract_name_finds_latest_agent PASSED tests/common/test_version.py::TestCurrentAgentName::test_extract_name_in_path_finds_installed PASSED tests/common/test_version.py::TestCurrentAgentName::test_extract_name_root_finds_installed PASSED tests/common/test_version.py::TestGetF5Platforms::test_get_f5_platform_bigip_12_0_0 PASSED tests/common/test_version.py::TestGetF5Platforms::test_get_f5_platform_bigip_12_1_0_hf1 PASSED tests/common/test_version.py::TestGetF5Platforms::test_get_f5_platform_bigip_12_1_1 PASSED tests/common/test_version.py::TestGetF5Platforms::test_get_f5_platform_bigiq_5_1_0 PASSED tests/common/test_version.py::TestGetF5Platforms::test_get_f5_platform_iworkflow_2_0_1 ============================== 9 passed in 0.13s ===============================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite errors="0" failures="0" hostname="eec89523506a" name="pytest" skipped="0" tests="9" time="0.138" timestamp="2026-11-14T03:25:53.222454"><testcase classname="tests.common.test_version.TestCurrentAgentName" name="test_extract_name_finds_installed" time="0.001" /><testcase classname="tests.common.test_version.TestCurrentAgentName" name="test_extract_name_finds_latest_agent" time="0.001" /><testcase classname="tests.common.test_version.TestCurrentAgentName" name="test_extract_name_in_path_finds_installed" time="0.001" /><testcase classname="tests.common.test_version.TestCurrentAgentName" name="test_extract_name_root_finds_installed" time="0.001" /><testcase classname="tests.common.test_version.TestGetF5Platforms" name="test_get_f5_platform_bigip_12_0_0" time="0.002" /><testcase classname="tests.common.test_version.TestGetF5Platforms" name="test_get_f5_platform_bigip_12_1_0_hf1" time="0.009" /><testcase classname="tests.common.test_version.TestGetF5Platforms" name="test_get_f5_platform_bigip_12_1_1" time="0.001" /><testcase classname="tests.common.test_version.TestGetF5Platforms" name="test_get_f5_platform_bigiq_5_1_0" time="0.001" /><testcase classname="tests.common.test_version.TestGetF5Platforms" name="test_get_f5_platform_iworkflow_2_0_1" time="0.001" /></testsuite></testsuites>
Agent log Included
[ 0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
[ 0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository Azure/WALinuxAgent.
[ 19.1s] 💭 (1060 chars) "The user is reporting a bug where running `waagent` commands fails when the current working
directory is under `/var/lib..."
[ 19.1s] 📖 read_file (azurelinuxagent/common/version.py)
[ 19.1s] ✓ {'status': 'ok', 'filepath': 'azurelinuxagent/common/version.py', 'content': '# Copyright 2014 Microsoft
Corporation\n#\…
[ 73.5s] 💭 (2863 chars) "The problematic code is in `set_current_agent()`:
```python
def set_current_agent():
path = os.getcwd()
lib_dir..."
[ 73.5s] 📖 read_file (azurelinuxagent/common/conf.py)
[ 73.5s] ✓ {'status': 'ok', 'filepath': 'azurelinuxagent/common/conf.py', 'content': '# Microsoft Azure Linux
Agent\n#\n# Copyright…
[ 103.5s] 💭 (269 chars) "Yes, `get_lib_dir` defaults to `/var/lib/waagent`.
Now I'll create a reproduction script.
I'll mock `os.getcwd` and `co..."
[ 103.5s] 🔧 run_command (31 lines) python3 - <<'PY'
[ 103.7s] → Caught expected AttributeError: 'NoneType' object has no attribute 'group'
[ 158.0s] 💭 (3038 chars) "Reproduction successful!
The fix is to check if the match is successful before calling `.group(1)`.
Looking at `azurel..."
[ 158.0s] ✏️ edit_file (azurelinuxagent/common/version.py)
[ 158.1s] ✓ {'status': 'ok', 'filepath': 'azurelinuxagent/common/version.py', 'occurrences': 1, 'strategy': 'exact',
'diff': '--- a/…
[ 171.8s] 💭 (53 chars) "Now I'll verify the fix with the reproduction script."
[ 171.8s] 🔧 run_command (24 lines) python3 - <<'PY'
[ 171.9s] → Successfully imported azurelinuxagent.common.version
[ 183.0s] 💭 (180 chars) "The fix works for the case where the user is in a subdirectory of `/var/lib/waagent`.
Now I should also verify that it ..."
[ 183.0s] 🔧 run_command (23 lines) python3 - <<'PY'
[ 183.1s] → Successfully imported azurelinuxagent.common.version
[ 202.4s] 💭 (219 chars) "Wait, in this case `CURRENT_AGENT` was `"WALinuxAgent-2.2.2"` and `CURRENT_VERSION` was
`"2.2.2"`.
Let's see if the ver..."
[ 202.4s] 🔧 run_command (23 lines) python3 - <<'PY'
[ 202.5s] → Successfully imported azurelinuxagent.common.version
[ 217.1s] 💭 (239 chars) "Perfect. It correctly identifies the version from the directory name if it's in a versioned
directory.
Now let's check ..."
[ 217.1s] 🔧 run_command (23 lines) python3 - <<'PY'
[ 217.2s] → Successfully imported azurelinuxagent.common.version
[ 226.8s] 💭 (49 chars) "Still works.
Last case: not in `lib_dir` at all."
[ 226.8s] 🔧 run_command (20 lines) python3 - <<'PY'
[ 226.9s] → Successfully imported azurelinuxagent.common.version
[ 233.9s] 💭 (174 chars) "All cases seem to be handled correctly now.
I'll check if there are any other places where similar logic might be used...."
[ 233.9s] 🔧 run_command grep -rn --include="*.py" "AGENT_NAME_PATTERN" .
[ 234.0s] → ./azurelinuxagent/ga/update.py:46: AGENT_PATTERN,
AGENT_NAME_PATTERN, AGENT_D
[ 240.4s] 💭 (159 chars) "It's used in `azurelinuxagent/common/version.py` (which I fixed) and
`azurelinuxagent/ga/update.py`.
Let's see how it's ..."
[ 240.4s] 📖 read_file (azurelinuxagent/ga/update.py)
[ 240.4s] ✓ {'status': 'ok', 'filepath': 'azurelinuxagent/ga/update.py', 'content': 'import zipfile\n\nimport
azurelinuxagent.common…
[ 245.3s] 💭 (102 chars) "It's imported, but not used immediately. Let's see where it is used in
`azurelinuxagent/ga/update.py`."
[ 245.3s] 🔧 run_command grep -n "AGENT_NAME_PATTERN" azurelinuxagent/ga/update.py
[ 245.4s] → 46: AGENT_PATTERN, AGENT_NAME_PATTERN, AGENT_DIR_PATTERN, \
[ 249.4s] 💭 (87 chars) "It's only imported. Not used for matching.
Let's check `tests/common/test_version.py`."
[ 249.4s] 📖 read_file (tests/common/test_version.py)
[ 249.4s] ✓ {'status': 'ok', 'filepath': 'tests/common/test_version.py', 'content': '# Copyright 2014 Microsoft
Corporation\n#\n# Li…
[ 253.9s] 💭 (79 chars) "The tests in `tests/common/test_version.py` should still pass.
Let's run them."
[ 253.9s] 🔧 run_command pytest tests/common/test_version.py -q --tb=short --no-header
[ 254.2s] → ....... [100%]
[ 327.9s] 💭 (194 chars) "Tests passed. Now I will double check if there are any other files that might also have this
problem. I'll search for `o..."
[ 327.9s] 🔧 run_command grep -rn "os.getcwd()" .
[ 328.0s] → ./azurelinuxagent/ga/update.py:119: agent_dir = os.getcwd()
[ 332.1s] 💭 (56 chars) "`azurelinuxagent/ga/update.py:119` might be interesting."
[ 332.1s] 📖 read_file (azurelinuxagent/ga/update.py)
[ 332.1s] ✓ {'status': 'ok', 'filepath': 'azurelinuxagent/ga/update.py', 'content': ' raise
Exception("Illegal attempt to…
[ 342.0s] 💭 (275 chars) "Wait, `azurelinuxagent/ga/update.py` at line 119 uses `os.getcwd()`, but it doesn't seem to
be parsing the version from ..."
[ 342.0s] 🔧 run_command grep -rn "AGENT_NAME_PATTERN" azurelinuxagent/common/version.py
[ 342.1s] → 101:AGENT_NAME_PATTERN = re.compile(AGENT_PATTERN)
[ 350.5s] 💭 (318 chars) "Only one place.
I think I'm good. I have:
1. Reproduced the bug with a script.
2. Fixed the bug by adding a check for `..."
[ 350.5s] 🔧 run_command git status --short && git diff
[ 350.6s] → M azurelinuxagent/common/version.py
[ 392.4s] 💭 (1751 chars) "Wait, in my `edit_file`, I used:
```python
match = AGENT_NAME_PATTERN.match(agent)
if match:
..."
[ 392.4s] 🤖 submit_patch
[ 392.5s] → submit_patch: {"status": "ok", "patch_size": 700, "files_changed": 1}
[ 403.6s] 💭 (26 chars) "Thinking process finished."
[ 403.6s] ✅ Agent finished: The issue was caused by `set_current_agent()` in `azurelinuxagent/common/version.py`
assuming that any subdirectory under the agent's library directory must follow the naming pattern `WALinuxAgent-<ve...
Native result row
{
"agent_error": null,
"duration_seconds": 407.98,
"error": null,
"grade": {
"collected_tests": 9,
"competition_junit_ok": true,
"error": null,
"required_issues_count": 0,
"resolved": true,
"status_counts": {
"PASSED": 9
},
"strict_clean_patch": true,
"test_exit_code": 0
},
"instance_id": "azure__walinuxagent-547",
"pass_idx": 0,
"patch_chars": 700,
"phase1_seconds": 407.25,
"repo": "Azure/WALinuxAgent",
"request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/azure__walinuxagent-547__p0__r3.jsonl",
"resolved": true,
"rollout_idx": 3,
"run_key": "azure__walinuxagent-547__p0__r3",
"strict_clean_patch": true,
"tool_calls": 18,
"total_llm_calls": 20,
"trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_azure__walinuxagent-547__p0__r3.json"
}