GEMMA DEVELOPER AGENT
SAVED EVIDENCE
← 31B real rollouts · 480 (exact stack, 32 lanes, 13-Nov)
ROLLOUT 2 · useblocks/sphinx-needs

useblocks__sphinx-needs-1102

Solved
476 stotal time
11tool calls
11model calls
6,118tokens generated
99,048prompt tokens read

Agent exceeded session timeout (7.5 min)

Turn by turn

Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.

System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`.
Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run.

## Critical Environment & Grader Rules
1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`.
2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files.
3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`.
4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks:
   `pytest path/to/test_file.py -k pattern -q --tb=short --no-header`
   If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off.
5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission.

## Execution Protocol

### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls)
- The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories.
- Run a single compound `run_command` with `grep -rn --include="*.py"` to locate:
  (a) the exact symbols, error strings, or functions from the problem description,
  (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and
  (c) the closest existing unit test files under `tests/`.

### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls)
- Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests.
- Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types.

### Phase 3 — Reproduce Bug in One Call (1 tool call)
- Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts.

### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls)
- Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`.
- Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests.
- **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`.

### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls)
- Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`.
- Run `git status --short && git diff` via `run_command`. Confirm:
  - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately),
  - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched),
  - Minimal, clean diff with valid imports and indentation.
- Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 5,251 characters
You are evaluating a software engineering task for repository useblocks/sphinx-needs.

Problem Statement:
Custom column titles in needtable does not work
Custom column titles in needtable does not work if the `needs_extra_options` has special characters like "-".

The following, for example, prints an empty "Description" column.

```rst
.. needtable::
   :filter: id.startswith("REQ_ID")
   :columns: id;title;status-desc as "Description";status
```

The following works:

```rst
.. needtable::
   :filter: id.startswith("REQ_ID")
   :columns: id;title;status-desc;status
```

## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns

## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.

## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./AUTHORS
./LICENSE
./MANIFEST.in
./Makefile
./README.rst
./codecov.yml
./docker
./docker/Dockerfile
./docker/build_docker.sh
./docs
./noxfile.py
./package.json
./performance
./performance/README.rst
./performance/performance_test.py
./performance/project
./performance/project/Makefile
./performance/project/_static
./performance/project/conf.template
./performance/project/index.template
./performance/project/make.bat
./performance/project/page.template
./performance/requirements.txt
./poetry.lock
./pyproject.toml
./sphinx_needs
./sphinx_needs/__init__.py
./sphinx_needs/api
./sphinx_needs/api/__init__.py
./sphinx_needs/api/configuration.py
./sphinx_needs/api/exceptions.py
./sphinx_needs/api/need.py
./sphinx_needs/builder.py
./sphinx_needs/config.py
./sphinx_needs/css
./sphinx_needs/css/blank
./sphinx_needs/css/common.css
./sphinx_needs/css/dark
./sphinx_needs/css/grids.css
./sphinx_needs/css/modern
./sphinx_needs/data.py
./sphinx_needs/debug.py
./sphinx_needs/defaults.py
./sphinx_needs/diagrams_common.py
./sphinx_needs/directives
./sphinx_needs/directives/__init__.py
./sphinx_needs/directives/list2need.py
./sphinx_needs/directives/need.py
./sphinx_needs/directives/needbar.py
./sphinx_needs/directives/needextend.py
./sphinx_needs/directives/needextract.py
./sphinx_needs/directives/needfilter.py
./sphinx_needs/directives/needflow.py
./sphinx_needs/directives/needgantt.py
./sphinx_needs/directives/needimport.py
./sphinx_needs/directives/needimport_template.rst
./sphinx_needs/directives/needlist.py
./sphinx_needs/directives/needpie.py
./sphinx_needs/directives/needreport.py
./sphinx_needs/directives/needreport_template.rst
./sphinx_needs/directives/needsequence.py
./sphinx_needs/directives/needservice.py
./sphinx_needs/directives/needtable.py
./sphinx_needs/directives/needuml.py
./sphinx_needs/directives/utils.py
./sphinx_needs/environment.py
./sphinx_needs/errors.py
./sphinx_needs/external_needs.py
./sphinx_needs/filter_common.py
./sphinx_needs/functions
./sphinx_needs/functions/__init__.py
./sphinx_needs/functions/common.py
./sphinx_needs/functions/functions.py
./sphinx_needs/images
./sphinx_needs/images/avatar.png
./sphinx_needs/images/avatar.svg
./sphinx_needs/images/feather_png
./sphinx_needs/images/feather_svg
./sphinx_needs/layout.py
./sphinx_needs/libs
./sphinx_needs/libs/html
./sphinx_needs/logging.py
./sphinx_needs/need_constraints.py
./sphinx_needs/needs.py
./sphinx_needs/needsfile.json
./sphinx_needs/needsfile.py
./sphinx_needs/nodes
./sphinx_needs/nodes/__init__.py
./sphinx_needs/roles
./sphinx_needs/roles/__init__.py
./sphinx_needs/roles/need_count.py
./sphinx_needs/roles/need_func.py
./sphinx_needs/roles/need_incoming.py
./sphinx_needs/roles/need_outgoing.py
./sphinx_needs/roles/need_part.py
./sphinx_needs/roles/need_ref.py
./sphinx_needs/services
./sphinx_needs/services/__init__.py
./sphinx_needs/services/base.py
./sphinx_needs/services/config
./sphinx_needs/services/github.py
./sphinx_needs/services/manager.py
./sphinx_needs/services/open_needs.py
./sphinx_needs/templates
./sphinx_needs/templates/permalink.html
./sphinx_needs/templates/time_measurements.html
./sphinx_needs/utils.py
./sphinx_needs/warnings.py
./tests
```
Turn 1at 38 s181 tokens out3,564 prompt tokens
The user is reporting a bug in `needtable` where custom column titles do not work if the `needs_extra_options` (the field name) contains special characters like `-`.
Example provided:
`:columns: id;title;status-desc as "Description";status`
This results in an empty "Description" column, but without the `as "Description"` part, it works.

Looking at the workspace layout, the `needtable` directive is likely implemented in `sphinx_needs/directives/needtable.py`.

I will start by searching for the code that handles `columns` in `needtable.py` and specifically how it handles the `as` keyword for custom titles.
TOOL CALL · run_command
{
  "command": "grep -rn \"columns\" sphinx_needs/directives/needtable.py"
}
Result of run_command 1,456 characters
{
  "status": "ok",
  "stdout": "37:        \"columns\": directives.unchanged_required,\n56:        columns_str = str(self.options.get(\"columns\", \"\"))\n57:        if len(columns_str) == 0:\n58:            columns_str = NeedsSphinxConfig(env.app.config).table_columns\n59:        if isinstance(columns_str, str):\n60:            _columns = [col.strip() for col in re.split(\";|,\", columns_str)]\n62:            _columns = columns_str\n64:        columns = [get_title(col) for col in _columns]\n70:            if len(columns) != len(colwidths_list):\n72:                    f\"Amount of elements in colwidths and columns do not match: \"\n73:                    f\"colwidths: {len(colwidths_list)} and columns: {len(columns)}\"\n95:            \"columns\": columns,\n125:    # Create a link_type dictionary, which keys-list can be easily used to find columns\n171:        tgroup = nodes.tgroup(cols=len(current_needtable[\"columns\"]))\n175:        for index, value in enumerate(current_needtable[\"columns\"]):\n185:        node_columns = []\n186:        for _option, title in current_needtable[\"columns\"]:\n188:            node_columns.append(nodes.entry(\"\", nodes.paragraph(\"\", header_name)))\n190:        tgroup += nodes.thead(\"\", nodes.row(\"\", *node_columns))\n242:            for option, _title in current_needtable[\"columns\"]:\n279:                    for option, _title in current_needtable[\"columns\"]:\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 181 tokens · stopped: STOP
<|channel>thought The user is reporting a bug in `needtable` where custom column titles do not work if the `needs_extra_options` (the field name) contains special characters like `-`. Example provided: `:columns: id;title;status-desc as "Description";status` This results in an empty "Description" column, but without the `as "Description"` part, it works. Looking at the workspace layout, the `needtable` directive is likely implemented in `sphinx_needs/directives/needtable.py`. I will start by searching for the code that handles `columns` in `needtable.py` and specifically how it handles the `as` keyword for custom titles.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn "columns" sphinx_needs/directives/needtable.py<|"|>}<tool_call|><|tool_response>
Turn 2at 53 s202 tokens out4,219 prompt tokens
The grep output shows that `columns` are processed starting around line 56 in `sphinx_needs/directives/needtable.py`.
It uses `get_title(col)` to get the title.
Let's see where `get_title` is defined and how it works. It might be in `sphinx_needs/directives/utils.py` or within `needtable.py`.
Since it's not in the `grep` of `needtable.py` (except for calls), let's check if it's imported or defined in the same file. Wait, I saw `get_title(col)` in line 64.

Let's read `sphinx_needs/directives/needtable.py` around those lines.
TOOL CALL · read_file
{
  "end_line": 100,
  "filepath": "sphinx_needs/directives/needtable.py",
  "start_line": 1
}
Result of read_file 3,892 characters
{
  "status": "ok",
  "filepath": "sphinx_needs/directives/needtable.py",
  "content": "import re\nfrom typing import Any, Callable, List, Sequence\n\nfrom docutils import nodes\nfrom docutils.parsers.rst import directives\nfrom sphinx.application import Sphinx\n\nfrom sphinx_needs.api.exceptions import NeedsInvalidException\nfrom sphinx_needs.config import NeedsSphinxConfig\nfrom sphinx_needs.data import NeedsInfoType, SphinxNeedsData\nfrom sphinx_needs.debug import measure_time\nfrom sphinx_needs.directives.utils import (\n    get_option_list,\n    get_title,\n    no_needs_found_paragraph,\n    used_filter_paragraph,\n)\nfrom sphinx_needs.filter_common import FilterBase, process_filters\nfrom sphinx_needs.functions.functions import check_and_get_content\nfrom sphinx_needs.utils import add_doc, profile, remove_node_from_tree, row_col_maker\n\n\nclass Needtable(nodes.General, nodes.Element):\n    pass\n\n\nclass NeedtableDirective(FilterBase):\n    \"\"\"\n    Directive present filtered needs inside a table.\n    \"\"\"\n\n    optional_arguments = 1\n    final_argument_whitespace = True\n    option_spec = {\n        \"show_filters\": directives.flag,\n        \"show_parts\": directives.flag,\n        \"columns\": directives.unchanged_required,\n        \"colwidths\": directives.unchanged_required,\n        \"style\": directives.unchanged_required,\n        \"style_row\": directives.unchanged_required,\n        \"style_col\": directives.unchanged_required,\n        \"sort\": directives.unchanged_required,\n        \"class\": directives.unchanged_required,\n    }\n\n    # Update the options_spec with values defined in the FilterBase class\n    option_spec.update(FilterBase.base_option_spec)\n\n    @profile(\"NEEDTABLE_RUN\")\n    def run(self) -> Sequence[nodes.Node]:\n        env = self.env\n\n        targetid = \"needtable-{docname}-{id}\".format(docname=env.docname, id=env.new_serialno(\"needtable\"))\n        targetnode = nodes.target(\"\", \"\", ids=[targetid])\n\n        columns_str = str(self.options.get(\"columns\", \"\"))\n        if len(columns_str) == 0:\n            columns_str = NeedsSphinxConfig(env.app.config).table_columns\n        if isinstance(columns_str, str):\n            _columns = [col.strip() for col in re.split(\";|,\", columns_str)]\n        else:\n            _columns = columns_str\n\n        columns = [get_title(col) for col in _columns]\n\n        colwidths = str(self.options.get(\"colwidths\", \"\"))\n        colwidths_list = []\n        if colwidths:\n            colwidths_list = [int(width.strip()) for width in re.split(\";|,\", colwidths)]\n            if len(columns) != len(colwidths_list):\n                raise NeedsInvalidException(\n                    f\"Amount of elements in colwidths and columns do not match: \"\n                    f\"colwidths: {len(colwidths_list)} and columns: {len(columns)}\"\n                )\n\n        classes = get_option_list(self.options, \"class\")\n\n        style = self.options.get(\"style\", \"\").upper()\n        style_row = self.options.get(\"style_row\", \"\")\n        style_col = self.options.get(\"style_col\", \"\")\n\n        sort = self.options.get(\"sort\", \"id_complete\")\n\n        title = None\n        if self.arguments:\n            title = self.arguments[0]\n\n        # Add the need and all needed information\n        SphinxNeedsData(env).get_or_create_tables()[targetid] = {\n            \"docname\": env.docname,\n            \"lineno\": self.lineno,\n            \"target_id\": targetid,\n            \"caption\": title,\n            \"classes\": classes,\n            \"columns\": columns,\n            \"colwidths\": colwidths_list,\n            \"style\": style,\n            \"style_row\": style_row,\n            \"style_col\": style_col,\n            \"sort\": sort,",
  "start_line": 1,
  "end_line": 100,
  "total_lines": 340,
  "is_truncated": false
}
Generated tokens 202 tokens · stopped: STOP
The grep output shows that `columns` are processed starting around line 56 in `sphinx_needs/directives/needtable.py`. It uses `get_title(col)` to get the title. Let's see where `get_title` is defined and how it works. It might be in `sphinx_needs/directives/utils.py` or within `needtable.py`. Since it's not in the `grep` of `needtable.py` (except for calls), let's check if it's imported or defined in the same file. Wait, I saw `get_title(col)` in line 64. Let's read `sphinx_needs/directives/needtable.py` around those lines. <channel|><|tool_call>call:read_file{filepath:<|"|>sphinx_needs/directives/needtable.py<|"|>,start_line:1,end_line:100}<tool_call|><|tool_response>
Turn 3at 60 s57 tokens out5,555 prompt tokens
`get_title` is imported from `sphinx_needs.directives.utils`. Let's examine `sphinx_needs/directives/utils.py`.
TOOL CALL · read_file
{
  "filepath": "sphinx_needs/directives/utils.py"
}
Result of read_file 3,680 characters
{
  "status": "ok",
  "filepath": "sphinx_needs/directives/utils.py",
  "content": "import re\nfrom typing import Any, Dict, List, Optional, Tuple\n\nfrom docutils import nodes\nfrom sphinx.environment import BuildEnvironment\n\nfrom sphinx_needs.config import NeedsSphinxConfig\nfrom sphinx_needs.data import NeedsFilteredBaseType, SphinxNeedsData\nfrom sphinx_needs.defaults import TITLE_REGEX\n\n\ndef no_needs_found_paragraph(message: Optional[str]) -> nodes.paragraph:\n    nothing_found = \"No needs passed the filters\" if message is None else message\n    para = nodes.paragraph()\n    para[\"classes\"].append(\"needs_filter_warning\")\n    nothing_found_node = nodes.Text(nothing_found)\n    para += nothing_found_node\n    return para\n\n\ndef used_filter_paragraph(current_needfilter: NeedsFilteredBaseType) -> nodes.paragraph:\n    para = nodes.paragraph()\n    filter_text = \"Used filter:\"\n    filter_text += (\n        \" status(%s)\" % \" OR \".join(current_needfilter[\"status\"]) if len(current_needfilter[\"status\"]) > 0 else \"\"\n    )\n    if len(current_needfilter[\"status\"]) > 0 and len(current_needfilter[\"tags\"]) > 0:\n        filter_text += \" AND \"\n    filter_text += \" tags(%s)\" % \" OR \".join(current_needfilter[\"tags\"]) if len(current_needfilter[\"tags\"]) > 0 else \"\"\n    if (len(current_needfilter[\"status\"]) > 0 or len(current_needfilter[\"tags\"]) > 0) and len(\n        current_needfilter[\"types\"]\n    ) > 0:\n        filter_text += \" AND \"\n    filter_text += (\n        \" types(%s)\" % \" OR \".join(current_needfilter[\"types\"]) if len(current_needfilter[\"types\"]) > 0 else \"\"\n    )\n\n    filter_node = nodes.emphasis(filter_text, filter_text)\n    para += filter_node\n    return para\n\n\ndef get_title(option_string: str) -> Tuple[str, str]:\n    \"\"\"\n    Returns a tuple of uppercase option and calculated title of given option string.\n\n    :param option_string:\n    :return: string\n    \"\"\"\n    if option_string.upper() == \"ID\":\n        return \"ID\", \"ID\"\n    match = re.search(TITLE_REGEX, option_string)\n    if not match:\n        return option_string.upper(), option_string.title().replace(\"_\", \" \")\n\n    option_name = match.group(1)\n    title = match.group(2)\n\n    return option_name.upper(), title\n\n\ndef get_option_list(options: Dict[str, Any], name: str) -> List[str]:\n    \"\"\"\n    Gets and creates a list of a given directive option value in a safe way\n    :param options: List of options\n    :param name: Name of the option\n    :return: List with strings\n    \"\"\"\n    values = str(options.get(name, \"\"))\n    values_list = []\n    if isinstance(values, str):\n        values_list = [value.strip() for value in re.split(\"[;,]\", values)]\n\n    return values_list\n\n\ndef analyse_needs_metrics(env: BuildEnvironment) -> Dict[str, Any]:\n    \"\"\"\n    Function to generate metrics about need objects.\n\n    :param env: Sphinx build environment\n    :return: Dictionary consisting of needs metrics.\n    \"\"\"\n    needs = SphinxNeedsData(env).get_or_create_needs()\n    metric_data: Dict[str, Any] = {\"needs_amount\": len(needs)}\n    needs_types = {i[\"directive\"]: 0 for i in NeedsSphinxConfig(env.config).types}\n\n    for i in needs.values():\n        if i[\"type\"] in needs_types:\n            needs_types[i[\"type\"]] += 1\n\n    metric_data[\"needs_types\"] = {i[0]: i[1] for i in sorted(needs_types.items(), key=lambda x: x[0])}\n    return metric_data\n\n\nclass SphinxNeedsLinkTypeException(BaseException):\n    \"\"\"Raised if problems with link types happen\"\"\"",
  "start_line": 1,
  "end_line": 97,
  "total_lines": 97,
  "is_truncated": false
}
Generated tokens 57 tokens · stopped: STOP
`get_title` is imported from `sphinx_needs.directives.utils`. Let's examine `sphinx_needs/directives/utils.py`. <channel|><|tool_call>call:read_file{filepath:<|"|>sphinx_needs/directives/utils.py<|"|>}<tool_call|><|tool_response>
Turn 4at 65 s59 tokens out6,784 prompt tokens
`get_title` is using `TITLE_REGEX`. Let's see what `TITLE_REGEX` is. It's imported from `sphinx_needs.defaults`.
TOOL CALL · read_file
{
  "filepath": "sphinx_needs/defaults.py"
}
Result of read_file 5,437 characters
{
  "status": "ok",
  "filepath": "sphinx_needs/defaults.py",
  "content": "import os\nfrom typing import Any, Dict\n\nfrom docutils.parsers.rst import directives\n\nDEFAULT_DIAGRAM_TEMPLATE = \"\"\"\n{%- if is_need -%}\n<size:12>{{type_name}}</size>\\\\n**{{title|wordwrap(15, wrapstring='**\\\\\\\\n**')}}**\\\\n<size:10>{{id}}</size>\n{%- else -%}\n<size:12>{{type_name}} (part)</size>\\\\n**{{content|wordwrap(15, wrapstring='**\\\\\\\\n**')}}**\\\\n<size:10>{{id_parent}}.**{{id}}**</size>\n{%- endif -%}\n\"\"\"\n\nLAYOUT_COMMON_SIDE = {\n    \"side\": ['<<image(\"field:image\", align=\"center\")>>'],\n    \"head\": ['<<meta(\"type_name\")>>: **<<meta(\"title\")>>** <<meta_id()>>'],\n    \"meta\": [\"<<meta_all(no_links=True)>>\", \"<<meta_links_all()>>\"],\n}\n\nLAYOUTS = {\n    \"test\": {\n        \"grid\": \"simple\",\n        \"layout\": {\n            \"head\": [\n                '<<meta(\"type_name\")>>: **<<meta(\"title\")>>** <<meta_id()>>  <<collapse_button(\"meta\", '\n                'collapsed=\"icon:arrow-down-circle\", visible=\"icon:arrow-right-circle\", initial=False)>> '\n            ],\n            \"meta\": [\"<<meta_all(no_links=True)>>\", \"<<meta_links_all()>>\"],\n        },\n    },\n    \"clean\": {\n        \"grid\": \"simple\",\n        \"layout\": {\n            \"head\": [\n                '<<meta(\"type_name\")>>: **<<meta(\"title\")>>** <<meta_id()>>  <<collapse_button(\"meta\", '\n                'collapsed=\"icon:arrow-down-circle\", visible=\"icon:arrow-right-circle\", initial=False)>> '\n            ],\n            \"meta\": [\"<<meta_all(no_links=True)>>\", \"<<meta_links_all()>>\"],\n        },\n    },\n    \"clean_l\": {\"grid\": \"simple_side_left\", \"layout\": LAYOUT_COMMON_SIDE},\n    \"clean_lp\": {\"grid\": \"simple_side_left_partial\", \"layout\": LAYOUT_COMMON_SIDE},\n    \"clean_r\": {\"grid\": \"simple_side_right\", \"layout\": LAYOUT_COMMON_SIDE},\n    \"clean_rp\": {\"grid\": \"simple_side_right_partial\", \"layout\": LAYOUT_COMMON_SIDE},\n    \"complete\": {\n        \"grid\": \"complex\",\n        \"layout\": {\n            \"head_left\": [\n                \"<<meta_id()>>\",\n            ],\n            \"head\": [\n                '<<meta(\"title\")>>',\n            ],\n            \"head_right\": ['<<meta(\"type_name\")>>'],\n            \"meta_left\": ['<<meta_all(no_links=True, exclude=[\"layout\",\"style\"])>>'],\n            \"meta_right\": [\"<<meta_links_all()>>\"],\n            \"footer_left\": [\n                'layout: <<meta(\"layout\")>>',\n            ],\n            \"footer\": [],\n            \"footer_right\": ['style: <<meta(\"style\")>>'],\n        },\n    },\n    \"focus\": {\"grid\": \"content\", \"layout\": {}},\n    \"focus_f\": {\"grid\": \"content_footer\", \"layout\": {\"footer\": [\"<<meta_id()>>\"]}},\n    \"focus_l\": {\"grid\": \"content_side_left\", \"layout\": {\"side\": [\"<<meta_id()>>\"]}},\n    \"focus_r\": {\"grid\": \"content_side_right\", \"layout\": {\"side\": [\"<<meta_id()>>\"]}},\n    \"debug\": {\n        \"grid\": \"simple\",\n        \"layout\": {\n            \"head\": [\n                '<<meta_id()>> **<<meta(\"title\")>>**',\n                '**<<collapse_button(\"meta\", collapsed=\"Debug view on\", visible=\"Debug view off\", initial=True)>>**',\n            ],\n            \"meta\": [\"<<meta_all(exclude=[], defaults=False, show_empty=True)>>\"],\n        },\n    },\n}\n\nNEEDFLOW_CONFIG_DEFAULTS = {\n    \"mixing\": \"\"\"\n        allowmixing\n    \"\"\",\n    \"monochrome\": \"\"\"\n        skinparam monochrome true\n    \"\"\",\n    \"handwritten\": \"\"\"\n        skinparam handwritten true\n    \"\"\",\n    \"lefttoright\": \"\"\"\n        left to right direction\n    \"\"\",\n    \"toptobottom\": \"\"\"\n        top to bottom direction\n    \"\"\",\n    \"transparent\": \"\"\"\n    skinparam backgroundcolor transparent\n    \"\"\",\n    \"tne\": \"\"\"\n    ' Based on \"Tomorrow night eighties\" color theme (see https://github.com/chriskempson/tomorrow-theme)\n    ' Provided by gabrieljoelc (https://github.com/gabrieljoelc/plantuml-themes)\n    !define Background   #2d2d2d\n    !define CurrentLine  #393939\n    !define Selection    #515151\n    !define Foregound    #cccccc\n    !define Comment      #999999\n    !define Red          #f2777a\n    !define Orange       #f99157\n    !define Yellow       #ffcc66\n    !define Green        #99cc99\n    !define Aqua         #66cccc\n    !define Blue         #6699cc\n    !define Purple       #cc99cc\n\n    skinparam Shadowing false\n    skinparam backgroundColor #2d2d2d\n    skinparam Arrow {\n      Color Foregound\n      FontColor Foregound\n      FontStyle Bold\n    }\n    skinparam Default {\n      FontName Menlo\n      FontColor #fdfdfd\n    }\n    skinparam package {\n      FontColor Purple\n      BackgroundColor CurrentLine\n      BorderColor Selection\n    }\n    skinparam node {\n      FontColor Yellow\n      BackgroundColor CurrentLine\n      BorderColor Selection\n    }\n    skinparam component {\n      BackgroundColor Selection\n      BorderColor Blue\n      FontColor Blue\n      Style uml2\n    }\n    skinparam database {\n      BackgroundColor CurrentLine\n      BorderColor Selection\n      FontColor Orange\n    }\n\n    skinparam cloud {\n      BackgroundColor CurrentLine\n      BorderColor Selection",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 231,
  "is_truncated": true
}
Generated tokens 59 tokens · stopped: STOP
`get_title` is using `TITLE_REGEX`. Let's see what `TITLE_REGEX` is. It's imported from `sphinx_needs.defaults`. <channel|><|tool_call>call:read_file{filepath:<|"|>sphinx_needs/defaults.py<|"|>}<tool_call|><|tool_response>
Turn 5at 73 s67 tokens out8,578 prompt tokens
Wait, `TITLE_REGEX` was not in the first 150 lines of `sphinx_needs/defaults.py`. Let me read the rest of the file.
TOOL CALL · read_file
{
  "filepath": "sphinx_needs/defaults.py",
  "start_line": 151
}
Result of read_file 2,538 characters
{
  "status": "ok",
  "filepath": "sphinx_needs/defaults.py",
  "content": "    }\n\n    skinparam interface {\n      BackgroundColor CurrentLine\n      BorderColor Selection\n      FontColor Green\n    }\n    \"\"\",\n    \"cplant\": \"\"\"\n    ' CPLANT by AOKI (https://github.com/aoki/cplant)\n    !define BLACK   #363D5D\n    !define RED     #F6363F\n    !define PINK    #F6216E\n    !define MAGENTA #A54FBD\n    !define GREEN   #37A77C\n    !define YELLOW  #F97A00\n    !define BLUE    #1E98F2\n    !define CYAN    #25AFCA\n    !define WHITE   #FEF2DC\n\n    ' Base Setting\n    skinparam Shadowing false\n    skinparam BackgroundColor transparent\n    skinparam ComponentStyle uml2\n    skinparam Default {\n      FontName  'Hiragino Sans'\n      FontColor BLACK\n      FontSize  10\n      FontStyle plain\n    }\n\n    skinparam Sequence {\n      ArrowThickness 1\n      ArrowColor RED\n      ActorBorderThickness 1\n      LifeLineBorderColor GREEN\n      ParticipantBorderThickness 0\n    }\n    skinparam Participant {\n      BackgroundColor BLACK\n      BorderColor BLACK\n      FontColor #FFFFFF\n    }\n\n    skinparam Actor {\n      BackgroundColor BLACK\n      BorderColor BLACK\n    }\n    \"\"\",\n}\n\nTITLE_REGEX = r'([\\w]+) as \"([\\w ]+)\"'\n\n\nNEED_DEFAULT_OPTIONS: Dict[str, Any] = {\n    \"id\": directives.unchanged_required,\n    \"status\": directives.unchanged_required,\n    \"tags\": directives.unchanged_required,\n    \"links\": directives.unchanged_required,\n    \"collapse\": directives.unchanged_required,\n    \"delete\": directives.unchanged,\n    \"jinja_content\": directives.unchanged,\n    \"hide\": directives.flag,\n    \"title_from_content\": directives.flag,\n    \"style\": directives.unchanged_required,\n    \"layout\": directives.unchanged_required,\n    \"template\": directives.unchanged_required,\n    \"pre_template\": directives.unchanged_required,\n    \"post_template\": directives.unchanged_required,\n    \"duration\": directives.unchanged_required,\n    \"completion\": directives.unchanged_required,\n    \"constraints\": directives.unchanged_required,\n    \"constraints_passed\": directives.unchanged_required,\n    \"constraints_results\": directives.unchanged_required,\n}\n\nNEEDEXTEND_NOT_ALLOWED_OPTIONS = [\"id\"]\n\nNEEDS_PROFILING = [x.upper() for x in os.environ.get(\"NEEDS_PROFILING\", \"\").split(\",\")]\n\nNEEDS_TABLES_CLASSES = [\"rtd-exclude-wy-table\", \"no-sphinx-material-strip\"]",
  "start_line": 151,
  "end_line": 231,
  "total_lines": 231,
  "is_truncated": false
}
Generated tokens 67 tokens · stopped: STOP
Wait, `TITLE_REGEX` was not in the first 150 lines of `sphinx_needs/defaults.py`. Let me read the rest of the file. <channel|><|tool_call>call:read_file{filepath:<|"|>sphinx_needs/defaults.py<|"|>,start_line:151}<tool_call|><|tool_response>
Turn 6at 129 s596 tokens out9,453 prompt tokens
Found it:
`TITLE_REGEX = r'([\w]+) as "([\w ]+)"'`

The issue is that `[\w]+` only matches alphanumeric characters and underscores. It doesn't match characters like `-`.
In the example `status-desc as "Description"`, `status-desc` contains a hyphen, so `[\w]+` fails to match.

I should update `TITLE_REGEX` to allow hyphens (and perhaps other common characters that might be used in option names).
According to the problem statement, the `needs_extra_options` can have special characters like `-`.

If I change `[\w]+` to something more inclusive, it should work.
Maybe `[^ ]+` (anything that is not a space) or adding `-` to the character class.

Given that `[\w]+` is used, maybe `[\w-]+` would be enough for hyphens.
Let's look at what else might be in `needs_extra_options`. The problem says "special characters like '-'".

If I change `TITLE_REGEX` to `r'(.+) as "(.+)"'`, it might be too greedy if someone puts `as` inside the quote. But the current regex is `([\\w]+) as \"([\\w ]+)\"`.

Wait, if I use `r'(.+) as "(.+)"'`, it will match everything until the last ` as "`.
Actually, `([\w-]+)+` might be safer for the first part if we want to be conservative, or just `([^ ]+)`.

Let's try to reproduce the bug first to be sure.
I'll create a small Sphinx project and run it.
But that might be too complex. I can just write a small Python script to test `get_title` with the current `TITLE_REGEX`.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport re\nfrom sphinx_needs.defaults import TITLE_REGEX\nfrom sphinx_needs.directives.utils import get_title\n\ntest_cases = [\n    (\"id\", (\"ID\", \"ID\")),\n    (\"title\", (\"TITLE\", \"Title\")),\n    (\"status-desc as \\\"Description\\\"\", (\"STATUS-DESC\", \"Description\")),\n    (\"status\", (\"STATUS\", \"Status\")),\n    (\"my_option as \\\"My Option\\\"\", (\"MY_OPTION\", \"My Option\")),\n]\n\nfor input_str, expected in test_cases:\n    actual = get_title(input_str)\n    print(f\"Input: {input_str!r} | Expected: {expected!r} | Actual: {actual!r} | {'OK' if actual == expected else 'FAIL'}\")\nPY\n"
}
Result of run_command 536 characters
{
  "status": "ok",
  "stdout": "Input: 'id' | Expected: ('ID', 'ID') | Actual: ('ID', 'ID') | OK\nInput: 'title' | Expected: ('TITLE', 'Title') | Actual: ('TITLE', 'Title') | OK\nInput: 'status-desc as \"Description\"' | Expected: ('STATUS-DESC', 'Description') | Actual: ('DESC', 'Description') | FAIL\nInput: 'status' | Expected: ('STATUS', 'Status') | Actual: ('STATUS', 'Status') | OK\nInput: 'my_option as \"My Option\"' | Expected: ('MY_OPTION', 'My Option') | Actual: ('MY_OPTION', 'My Option') | OK\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 596 tokens · stopped: STOP
Found it: `TITLE_REGEX = r'([\w]+) as "([\w ]+)"'` The issue is that `[\w]+` only matches alphanumeric characters and underscores. It doesn't match characters like `-`. In the example `status-desc as "Description"`, `status-desc` contains a hyphen, so `[\w]+` fails to match. I should update `TITLE_REGEX` to allow hyphens (and perhaps other common characters that might be used in option names). According to the problem statement, the `needs_extra_options` can have special characters like `-`. If I change `[\w]+` to something more inclusive, it should work. Maybe `[^ ]+` (anything that is not a space) or adding `-` to the character class. Given that `[\w]+` is used, maybe `[\w-]+` would be enough for hyphens. Let's look at what else might be in `needs_extra_options`. The problem says "special characters like '-'". If I change `TITLE_REGEX` to `r'(.+) as "(.+)"'`, it might be too greedy if someone puts `as` inside the quote. But the current regex is `([\\w]+) as \"([\\w ]+)\"`. Wait, if I use `r'(.+) as "(.+)"'`, it will match everything until the last ` as "`. Actually, `([\w-]+)+` might be safer for the first part if we want to be conservative, or just `([^ ]+)`. Let's try to reproduce the bug first to be sure. I'll create a small Sphinx project and run it. But that might be too complex. I can just write a small Python script to test `get_title` with the current `TITLE_REGEX`. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import re from sphinx_needs.defaults import TITLE_REGEX from sphinx_needs.directives.utils import get_title test_cases = [ ("id", ("ID", "ID")), ("title", ("TITLE", "Title")), ("status-desc as \"Description\"", ("STATUS-DESC", "Description")), ("status", ("STATUS", "Status")), ("my_option as \"My Option\"", ("MY_OPTION", "My Option")), ] for input_str, expected in test_cases: actual = get_title(input_str) print(f"Input: {input_str!r} | Expected: {expected!r} | Actual: {actual!r} | {'OK' if actual == expected else 'FAIL'}") PY <|"|>}<tool_call|><|tool_response>
Turn 7at 179 s658 tokens out10,243 prompt tokens
Wait, look at the output:
`Input: 'status-desc as "Description"' | Expected: ('STATUS-DESC', 'Description') | Actual: ('DESC', 'Description') | FAIL`

Wait, why is actual `('DESC', 'Description')`?
Ah! `re.search(TITLE_REGEX, option_string)`.
`TITLE_REGEX = r'([\w]+) as "([\w ]+)"'`
In `status-desc as "Description"`, `\w+` matches `desc`.
So `re.search` finds `desc as "Description"`.
`match.group(1)` is `desc`.
`match.group(2)` is `Description`.
And `get_title` returns `option_name.upper(), title`, which is `('DESC', 'Description')`.

Exactly! The `\w+` is matching the part after the hyphen.

I should change `TITLE_REGEX` to allow hyphens in the option name.
And maybe other characters.
What characters are allowed in `needs_extra_options`?
Usually they are reasonably alphanumeric, underscores, and hyphens.

If I change `([\w]+)` to `([^\s]+)`, it will match everything up to the first space.
`status-desc as "Description"`
`([^\s]+)` will match `status-desc`.
Then ` as "` will match.
Then `([ \w]+)` will match `Description`.

Wait, if I use `([^\s]+)`, it matches everything up to the space.
Let's test this.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport re\n\n# Old regex\nold_regex = r'([\\w]+) as \"([\\w ]+)\"'\n# Proposed new regex\nnew_regex = r'([^\\s]+) as \"([^\\\"]+)\"'\n\ntest_str = 'status-desc as \"Description\"'\n\nmatch_old = re.search(old_regex, test_str)\nif match_old:\n    print(f\"Old: {match_old.groups()}\")\nelse:\n    print(\"Old: No match\")\n\nmatch_new = re.search(new_regex, test_str)\nif match_new:\n    print(f\"New: {match_new.groups()}\")\nelse:\n    print(\"New: No match\")\n\n# Test with something else\ntest_str_2 = 'my_option as \"My Option\"'\nmatch_old_2 = re.search(old_regex, test_str_2)\nprint(f\"Old 2: {match_old_2.groups() if match_old_2 else 'No match'}\")\nmatch_new_2 = re.search(new_regex, test_str_2)\nprint(f\"New 2: {match_new_2.groups() if match_new_2 else 'No match'}\")\nPY\n"
}
Result of run_command 197 characters
{
  "status": "ok",
  "stdout": "Old: ('desc', 'Description')\nNew: ('status-desc', 'Description')\nOld 2: ('my_option', 'My Option')\nNew 2: ('my_option', 'My Option')\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 658 tokens · stopped: STOP
Wait, look at the output: `Input: 'status-desc as "Description"' | Expected: ('STATUS-DESC', 'Description') | Actual: ('DESC', 'Description') | FAIL` Wait, why is actual `('DESC', 'Description')`? Ah! `re.search(TITLE_REGEX, option_string)`. `TITLE_REGEX = r'([\w]+) as "([\w ]+)"'` In `status-desc as "Description"`, `\w+` matches `desc`. So `re.search` finds `desc as "Description"`. `match.group(1)` is `desc`. `match.group(2)` is `Description`. And `get_title` returns `option_name.upper(), title`, which is `('DESC', 'Description')`. Exactly! The `\w+` is matching the part after the hyphen. I should change `TITLE_REGEX` to allow hyphens in the option name. And maybe other characters. What characters are allowed in `needs_extra_options`? Usually they are reasonably alphanumeric, underscores, and hyphens. If I change `([\w]+)` to `([^\s]+)`, it will match everything up to the first space. `status-desc as "Description"` `([^\s]+)` will match `status-desc`. Then ` as "` will match. Then `([ \w]+)` will match `Description`. Wait, if I use `([^\s]+)`, it matches everything up to the space. Let's test this.<channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import re # Old regex old_regex = r'([\w]+) as "([\w ]+)"' # Proposed new regex new_regex = r'([^\s]+) as "([^\"]+)"' test_str = 'status-desc as "Description"' match_old = re.search(old_regex, test_str) if match_old: print(f"Old: {match_old.groups()}") else: print("Old: No match") match_new = re.search(new_regex, test_str) if match_new: print(f"New: {match_new.groups()}") else: print("New: No match") # Test with something else test_str_2 = 'my_option as "My Option"' match_old_2 = re.search(old_regex, test_str_2) print(f"Old 2: {match_old_2.groups() if match_old_2 else 'No match'}") match_new_2 = re.search(new_regex, test_str_2) print(f"New 2: {match_new_2.groups() if match_new_2 else 'No match'}") PY <|"|>}<tool_call|><|tool_response>
Turn 8at 206 s307 tokens out10,992 prompt tokens
The new regex `r'([^\s]+) as "([^\"]+)"'` seems much better. It captures anything non-whitespace for the option name, and anything except a quote for the title.

Let's see if there are any downsides.
If the input is `status as "Status Column"`, `([^\s]+)` will match `status`, and `([^\"]+)` will match `Status Column`.
If the input is `id`, the `re.search` will not find a match, and `get_title` will fall back to `option_string.upper(), option_string.title().replace("_", " ")`. This is correct.

Wait, what if there are multiple ` as "` in the string? `re.search` finds the first one.
What if the title contains a quote? The current regex `[\w ]+` didn't allow it anyway. `[^\"]+` also doesn't allow it.

Let's check if there are other special characters that should be allowed in option names.
Usually, just alphanumeric, underscore, and hyphen are used.
But `[^\s]+` is quite general.

Wait, I should check if `TITLE_REGEX` is used anywhere else.
I'll check `grep` for `TITLE_REGEX`.
TOOL CALL · run_command
{
  "command": "grep -rn \"TITLE_REGEX\" ."
}
Result of run_command 308 characters
{
  "status": "ok",
  "stdout": "./sphinx_needs/directives/utils.py:9:from sphinx_needs.defaults import TITLE_REGEX\n./sphinx_needs/directives/utils.py:52:    match = re.search(TITLE_REGEX, option_string)\n./sphinx_needs/defaults.py:202:TITLE_REGEX = r'([\\w]+) as \"([\\w ]+)\"'\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 307 tokens · stopped: STOP
The new regex `r'([^\s]+) as "([^\"]+)"'` seems much better. It captures anything non-whitespace for the option name, and anything except a quote for the title. Let's see if there are any downsides. If the input is `status as "Status Column"`, `([^\s]+)` will match `status`, and `([^\"]+)` will match `Status Column`. If the input is `id`, the `re.search` will not find a match, and `get_title` will fall back to `option_string.upper(), option_string.title().replace("_", " ")`. This is correct. Wait, what if there are multiple ` as "` in the string? `re.search` finds the first one. What if the title contains a quote? The current regex `[\w ]+` didn't allow it anyway. `[^\"]+` also doesn't allow it. Let's check if there are other special characters that should be allowed in option names. Usually, just alphanumeric, underscore, and hyphen are used. But `[^\s]+` is quite general. Wait, I should check if `TITLE_REGEX` is used anywhere else. I'll check `grep` for `TITLE_REGEX`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "TITLE_REGEX" .<|"|>}<tool_call|><|tool_response>
Turn 9at 294 s1,294 tokens out11,426 prompt tokens
It's only used in `get_title` in `sphinx_needs/directives/utils.py`.

Let's verify if `([^\s]+) as "([^\"]+)"` is too broad.
What if `option_string` is `some text as "Some Title"`?
Actually, `option_string` comes from `_columns = [col.strip() for col in re.split(";|,", columns_str)]` in `NeedtableDirective.run`.
So `option_string` is one of the column specifications.

Example: `:columns: id;title;status-desc as "Description";status`
`columns_str` is `id;title;status-desc as "Description";status`
`_columns` is `['id', 'title', 'status-desc as "Description"', 'status']`
`get_title` is called for each.

If the user puts something weird like `this is not an option as "Title"`, then `get_title` will return `('this', 'Title')`?
No, `([^\s]+)` matches `this`, but then it expects ` as "`.
Wait, if `option_string` is `this is not an option as "Title"`.
`re.search` will search for `[^\s]+ as "[^\"]+"`.
It will find `option as "Title"`.
`match.group(1)` will be `option`.
`match.group(2)` will be `Title`.
And it will return `('OPTION', 'Title')`.

Is this a problem? Most likely not, as users will typically follow the expected format. The previous regex `[\w]+ as "[\w ]+"` would have done the same thing: it would have found `option as "Title"`.

However, `re.search` finds the *first* match. If the string is `status-desc as "Description"`, `[\w]+` matches `desc` because `status-` part does not match `\w+`.
Wait, `\w` includes `[a-zA-Z0-9_]`. It does NOT include `-`.
So in `status-desc as "Description"`, the first match for `\w+ as "[\w ]+"` is indeed `desc as "Description"`.

If I use `^([^\s]+) as "([^\"]+)"$` (anchoring it), it would be safer, but `get_title` doesn't seem to require the whole string to match.
But since we are splitting by `;|,`, and then stripping, we can assume the string is supposed to be a single column definition.

Let's test with `^([^\s]+) as "([^\"]+)"$` to see if it's better.
Actually, the current implementation uses `re.search`, not `re.match`.

If I use `r'^(.+) as "(.+)"$'`, it would be even more flexible.
But we must be careful about the regex.

Let's try `r'^(.+) as "(.+)"$'`.
For `status-desc as "Description"`, `group(1)` would be `status-desc` and `group(2)` would be `Description`.
For `id`, it wouldn't match, which is correct.

Wait, if I use `^`, I should probably switch `re.search` to `re.match` or keep `re.search` with `^`.

Actually, just changing `[\w]+` to `[\w-]+` might be enough for the reported issue. But the user said "special characters like '-'", implying there might be others.

If I look at how other sphinx-needs options are handled, they are mostly `\w+`.

Let's try to find if there's a better way to parse `option as "Title"`.
Maybe `r'^(.+)\s+as\s+"(.+)"$'`?

Let's test a few more things.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport re\ntest_cases = [\n    ('status-desc as \"Description\"', ('STATUS-DESC', 'Description')),\n    ('my_option as \"My Option\"', ('MY_OPTION', 'My Option')),\n    ('id', ('ID', 'ID')),\n    ('status', ('STATUS', 'Status')),\n    ('complex-option_1 as \"Complex Title\"', ('COMPLEX-OPTION_1', 'Complex Title')),\n]\n\n# Proposal 1: r'^(.+) as \"(.+)\"$'\nregex1 = r'^(.+) as \"(.+)\"$'\nprint(\"Testing Proposal 1:\")\nfor input_str, expected in test_cases:\n    match = re.search(regex1, input_str)\n    if match:\n        res = (match.group(1).upper(), match.group(2))\n    else:\n        res = (input_str.upper(), input_str.title().replace(\"_\", \" \"))\n    print(f\"{input_str!r} -> {res!r} | OK: {res == expected}\")\n\n# Proposal 2: r'([\\w-]+) as \"([\\w ]+)\"'\nregex2 = r'([\\w-]+) as \"([\\w ]+)\"'\nprint(\"\\nTesting Proposal 2:\")\nfor input_str, expected in test_cases:\n    match = re.search(regex2, input_str)\n    if match:\n        res = (match.group(1).upper(), match.group(2))\n    else:\n        res = (input_str.upper(), input_str.title().replace(\"_\", \" \"))\n    print(f\"{input_str!r} -> {res!r} | OK: {res == expected}\")\nPY\n"
}
Result of run_command 748 characters
{
  "status": "ok",
  "stdout": "Testing Proposal 1:\n'status-desc as \"Description\"' -> ('STATUS-DESC', 'Description') | OK: True\n'my_option as \"My Option\"' -> ('MY_OPTION', 'My Option') | OK: True\n'id' -> ('ID', 'Id') | OK: False\n'status' -> ('STATUS', 'Status') | OK: True\n'complex-option_1 as \"Complex Title\"' -> ('COMPLEX-OPTION_1', 'Complex Title') | OK: True\n\nTesting Proposal 2:\n'status-desc as \"Description\"' -> ('STATUS-DESC', 'Description') | OK: True\n'my_option as \"My Option\"' -> ('MY_OPTION', 'My Option') | OK: True\n'id' -> ('ID', 'Id') | OK: False\n'status' -> ('STATUS', 'Status') | OK: True\n'complex-option_1 as \"Complex Title\"' -> ('COMPLEX-OPTION_1', 'Complex Title') | OK: True\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 1,294 tokens · stopped: STOP
It's only used in `get_title` in `sphinx_needs/directives/utils.py`. Let's verify if `([^\s]+) as "([^\"]+)"` is too broad. What if `option_string` is `some text as "Some Title"`? Actually, `option_string` comes from `_columns = [col.strip() for col in re.split(";|,", columns_str)]` in `NeedtableDirective.run`. So `option_string` is one of the column specifications. Example: `:columns: id;title;status-desc as "Description";status` `columns_str` is `id;title;status-desc as "Description";status` `_columns` is `['id', 'title', 'status-desc as "Description"', 'status']` `get_title` is called for each. If the user puts something weird like `this is not an option as "Title"`, then `get_title` will return `('this', 'Title')`? No, `([^\s]+)` matches `this`, but then it expects ` as "`. Wait, if `option_string` is `this is not an option as "Title"`. `re.search` will search for `[^\s]+ as "[^\"]+"`. It will find `option as "Title"`. `match.group(1)` will be `option`. `match.group(2)` will be `Title`. And it will return `('OPTION', 'Title')`. Is this a problem? Most likely not, as users will typically follow the expected format. The previous regex `[\w]+ as "[\w ]+"` would have done the same thing: it would have found `option as "Title"`. However, `re.search` finds the *first* match. If the string is `status-desc as "Description"`, `[\w]+` matches `desc` because `status-` part does not match `\w+`. Wait, `\w` includes `[a-zA-Z0-9_]`. It does NOT include `-`. So in `status-desc as "Description"`, the first match for `\w+ as "[\w ]+"` is indeed `desc as "Description"`. If I use `^([^\s]+) as "([^\"]+)"$` (anchoring it), it would be safer, but `get_title` doesn't seem to require the whole string to match. But since we are splitting by `;|,`, and then stripping, we can assume the string is supposed to be a single column definition. Let's test with `^([^\s]+) as "([^\"]+)"$` to see if it's better. Actually, the current implementation uses `re.search`, not `re.match`. If I use `r'^(.+) as "(.+)"$'`, it would be even more flexible. But we must be careful about the regex. Let's try `r'^(.+) as "(.+)"$'`. For `status-desc as "Description"`, `group(1)` would be `status-desc` and `group(2)` would be `Description`. For `id`, it wouldn't match, which is correct. Wait, if I use `^`, I should probably switch `re.search` to `re.match` or keep `re.search` with `^`. Actually, just changing `[\w]+` to `[\w-]+` might be enough for the reported issue. But the user said "special characters like '-'", implying there might be others. If I look at how other sphinx-needs options are handled, they are mostly `\w+`. Let's try to find if there's a better way to parse `option as "Title"`. Maybe `r'^(.+)\s+as\s+"(.+)"$'`? Let's test a few more things. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import re test_cases = [ ('status-desc as "Description"', ('STATUS-DESC', 'Description')), ('my_option as "My Option"', ('MY_OPTION', 'My Option')), ('id', ('ID', 'ID')), ('status', ('STATUS', 'Status')), ('complex-option_1 as "Complex Title"', ('COMPLEX-OPTION_1', 'Complex Title')), ] # Proposal 1: r'^(.+) as "(.+)"$' regex1 = r'^(.+) as "(.+)"$' print("Testing Proposal 1:") for input_str, expected in test_cases: match = re.search(regex1, input_str) if match: res = (match.group(1).upper(), match.group(2)) else: res = (input_str.upper(), input_str.title().replace("_", " ")) print(f"{input_str!r} -> {res!r} | OK: {res == expected}") # Proposal 2: r'([\w-]+) as "([\w ]+)"' regex2 = r'([\w-]+) as "([\w ]+)"' print("\nTesting Proposal 2:") for input_str, expected in test_cases: match = re.search(regex2, input_str) if match: res = (match.group(1).upper(), match.group(2)) else: res = (input_str.upper(), input_str.title().replace("_", " ")) print(f"{input_str!r} -> {res!r} | OK: {res == expected}") PY <|"|>}<tool_call|><|tool_response>
Turn 10at 412 s1,961 tokens out12,997 prompt tokens
Wait, `('ID', 'Id') | OK: False` for `id`.
The `expected` was `('ID', 'ID')`.
In `get_title` source code:
```python
    if option_string.upper() == "ID":
        return "ID", "ID"
```
So `id` should return `("ID", "ID")`. My test script missed that.

The main point is: my proposal 2 `r'([\w-]+) as "([\w ]+)"'` works for `status-desc`.
But maybe `(.+) as "(.+)"` is better because it covers any characters in the option name.

Actually, let's just use `r'^(.+) as "(.+)"$'` but remember to keep the `if option_string.upper() == "ID":` check.

Wait, the original code was:
```python
def get_title(option_string: str) -> Tuple[str, str]:
    if option_string.upper() == "ID":
        return "ID", "ID"
    match = re.search(TITLE_REGEX, option_string)
    if not match:
        return option_string.upper(), option_string.title().replace("_", " ")

    option_name = match.group(1)
    title = match.group(2)

    return option_name.upper(), title
```

If `TITLE_REGEX = r'([\w]+) as "([\w ]+)"'`, then for `status-desc as "Description"`, `re.search` finds `desc as "Description"`.

If I change `TITLE_REGEX` to `r'^(.+) as "(.+)"$'`, it will match the whole string.
But `re.search` with `^` and `$` is equivalent to `re.fullmatch`.

Let's see if adding `-` to `\w` is enough.
`TITLE_REGEX = r'([\w-]+) as "([\w ]+)"'`
For `status-desc as "Description"`, it would match the whole thing.

Is it possible for the option name to have other characters?
The problem said "special characters like '-'".
Common characters for identifiers often include `.`, `:`, `/`.

If I use `r'^(.+) as "(.+)"$'`, it should be the most robust as long as the ` as "` is the delimiter.

Wait, if the option name has spaces, like `my option as "Title"`, then `(.+)` will match `my option`.
Is that allowed? Probably not, as usually options are single words (or hyphenated).
But `NeedtableDirective.run` splits by `;|,` and then strips.
So any spaces remaining in `option_string` are internal spaces.

Let's try `r'^(.+) as "(.+)"$'`.

Wait, let's check if any other place uses `TITLE_REGEX` in a way that would break if I add `^` and `$`.
No, it's only used in `get_title`.

Actually, let's just use `r'(.+) as "(.+)"'` without anchoring, but use `re.fullmatch` or just be careful.
Wait, `re.search` with `(.+)` will match greedily.
For `status-desc as "Description"`, `(.+)` will match `status-desc` because it's followed by ` as "`.

Actually, the simplest fix that is likely to be accepted is just adding `-` to the character classes, or making them more general.

Let's look at the original regex again: `r'([\w]+) as "([\w ]+)"'`
The problem is `[\w]+`.
If I change it to `r'(.+) as "(.+)"'`, it's more general.

Let's test `r'(.+) as "(.+)"'` with `re.search`.
If input is `status-desc as "Description"`, `(.+)` will match `status-desc`.
If input is `status`, it won't match.

Wait, if I use `(.+)`, it might be too greedy.
`test as "Title" and something else`
`(.+)` will match `test as "Title" and something else`? No, because it needs to be followed by ` as "`.
Wait, `(.+) as "(.+)"` on `test as "Title" as "Another Title"`
`group(1)` will be `test as "Title"` and `group(2)` will be `Another Title`.
This is probably fine.

Actually, the most precise way to fix the reported bug while maintaining behavior is to allow hyphens in the first group.

Let's see if I should just use `r'([\w-]+) as "([\w ]+)"'`.
But the user said "special characters like '-'".
What about dots? Colons?

If I use `r'^(.+) as "(.+)"$'`, it's very clear: if it looks like `... as "..."`, it is one.

Let's try to see if I can find more examples of `needs_extra_options`.
They are just arbitrary keys in the need's data.

Actually, I'll go with `r'^(.+) as "(.+)"$'`. It seems the most robust for this specific format.
Wait, if I use `^` and `$`, I should make sure I don't break other things.
If `option_string` is `  status-desc as "Description"  `, it might fail.
But `option_string` is already stripped: `_columns = [col.strip() for col in re.split(";|,", columns_str)]`.

Let's double check `get_title` logic again.
```python
def get_title(option_string: str) -> Tuple[str, str]:
    if option_string.upper() == "ID":
        return "ID", "ID"
    match = re.search(TITLE_REGEX, option_string)
    if not match:
        return option_string.upper(), option_string.title().replace("_", " ")
    ...
```

If I use `TITLE_REGEX = r'^(.+) as "(.+)"$'`, then `re.search` will work fine for `status-desc as "Description"`.
For `id`, `option_string.upper() == "ID"` handles it.
For `status`, `re.search` will not match, and it returns `('STATUS', 'Status')`.

Wait, if I have `status as "Status"`, `re.search` matches, returns `('STATUS', 'Status')`.
If I have `status`, `re.search` doesn't match, returns `('STATUS', 'Status')`.
Perfect.

One more thing: `([ \w]+)` was used for the title.
If I use `(.+)` for the title, it allows anything.
Is that okay? Probably, since it's inside quotes.

Let's compare `r'([\w-]+) as "([\w ]+)"'` vs `r'^(.+) as "(.+)"$'`.
The latter is more flexible.

Let's try a test with `r'^(.+) as "(.+)"$'` and some edge cases.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport re\nTITLE_REGEX = r'^(.+) as \"(.+)\"$'\ndef get_title(option_string):\n    if option_string.upper() == \"ID\":\n        return \"ID\", \"ID\"\n    match = re.search(TITLE_REGEX, option_string)\n    if not match:\n        return option_string.upper(), option_string.title().replace(\"_\", \" \")\n    return match.group(1).upper(), match.group(2)\n\ntest_cases = [\n    (\"id\", (\"ID\", \"ID\")),\n    (\"status\", (\"STATUS\", \"Status\")),\n    (\"status-desc as \\\"Description\\\"\", (\"STATUS-DESC\", \"Description\")),\n    (\"my_option as \\\"My Option\\\"\", (\"MY_OPTION\", \"My Option\")),\n    (\"complex.option as \\\"Complex Title!\\\"\", (\"COMPLEX.OPTION\", \"Complex Title!\")),\n    (\"  status-desc as \\\"Description\\\"  \", (\"  STATUS-DESC AS \\\"DESCRIPTION\\\"  \", \"  Status-Desc As \\\"Description\\\"  \")),\n]\n\nfor input_str, expected in test_cases:\n    actual = get_title(input_str)\n    print(f\"Input: {input_str!r} | Expected: {expected!r} | Actual: {actual!r} | {'OK' if actual == expected else 'FAIL'}\")\nPY\n"
}
Result of run_command 834 characters
{
  "status": "ok",
  "stdout": "Input: 'id' | Expected: ('ID', 'ID') | Actual: ('ID', 'ID') | OK\nInput: 'status' | Expected: ('STATUS', 'Status') | Actual: ('STATUS', 'Status') | OK\nInput: 'status-desc as \"Description\"' | Expected: ('STATUS-DESC', 'Description') | Actual: ('STATUS-DESC', 'Description') | OK\nInput: 'my_option as \"My Option\"' | Expected: ('MY_OPTION', 'My Option') | Actual: ('MY_OPTION', 'My Option') | OK\nInput: 'complex.option as \"Complex Title!\"' | Expected: ('COMPLEX.OPTION', 'Complex Title!') | Actual: ('COMPLEX.OPTION', 'Complex Title!') | OK\nInput: '  status-desc as \"Description\"  ' | Expected: ('  STATUS-DESC AS \"DESCRIPTION\"  ', '  Status-Desc As \"Description\"  ') | Actual: ('  STATUS-DESC AS \"DESCRIPTION\"  ', '  Status-Desc As \"Description\"  ') | OK\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 1,961 tokens · stopped: STOP
Wait, `('ID', 'Id') | OK: False` for `id`. The `expected` was `('ID', 'ID')`. In `get_title` source code: ```python if option_string.upper() == "ID": return "ID", "ID" ``` So `id` should return `("ID", "ID")`. My test script missed that. The main point is: my proposal 2 `r'([\w-]+) as "([\w ]+)"'` works for `status-desc`. But maybe `(.+) as "(.+)"` is better because it covers any characters in the option name. Actually, let's just use `r'^(.+) as "(.+)"$'` but remember to keep the `if option_string.upper() == "ID":` check. Wait, the original code was: ```python def get_title(option_string: str) -> Tuple[str, str]: if option_string.upper() == "ID": return "ID", "ID" match = re.search(TITLE_REGEX, option_string) if not match: return option_string.upper(), option_string.title().replace("_", " ") option_name = match.group(1) title = match.group(2) return option_name.upper(), title ``` If `TITLE_REGEX = r'([\w]+) as "([\w ]+)"'`, then for `status-desc as "Description"`, `re.search` finds `desc as "Description"`. If I change `TITLE_REGEX` to `r'^(.+) as "(.+)"$'`, it will match the whole string. But `re.search` with `^` and `$` is equivalent to `re.fullmatch`. Let's see if adding `-` to `\w` is enough. `TITLE_REGEX = r'([\w-]+) as "([\w ]+)"'` For `status-desc as "Description"`, it would match the whole thing. Is it possible for the option name to have other characters? The problem said "special characters like '-'". Common characters for identifiers often include `.`, `:`, `/`. If I use `r'^(.+) as "(.+)"$'`, it should be the most robust as long as the ` as "` is the delimiter. Wait, if the option name has spaces, like `my option as "Title"`, then `(.+)` will match `my option`. Is that allowed? Probably not, as usually options are single words (or hyphenated). But `NeedtableDirective.run` splits by `;|,` and then strips. So any spaces remaining in `option_string` are internal spaces. Let's try `r'^(.+) as "(.+)"$'`. Wait, let's check if any other place uses `TITLE_REGEX` in a way that would break if I add `^` and `$`. No, it's only used in `get_title`. Actually, let's just use `r'(.+) as "(.+)"'` without anchoring, but use `re.fullmatch` or just be careful. Wait, `re.search` with `(.+)` will match greedily. For `status-desc as "Description"`, `(.+)` will match `status-desc` because it's followed by ` as "`. Actually, the simplest fix that is likely to be accepted is just adding `-` to the character classes, or making them more general. Let's look at the original regex again: `r'([\w]+) as "([\w ]+)"'` The problem is `[\w]+`. If I change it to `r'(.+) as "(.+)"'`, it's more general. Let's test `r'(.+) as "(.+)"'` with `re.search`. If input is `status-desc as "Description"`, `(.+)` will match `status-desc`. If input is `status`, it won't match. Wait, if I use `(.+)`, it might be too greedy. `test as "Title" and something else` `(.+)` will match `test as "Title" and something else`? No, because it needs to be followed by ` as "`. Wait, `(.+) as "(.+)"` on `test as "Title" as "Another Title"` `group(1)` will be `test as "Title"` and `group(2)` will be `Another Title`. This is probably fine. Actually, the most precise way to fix the reported bug while maintaining behavior is to allow hyphens in the first group. Let's see if I should just use `r'([\w-]+) as "([\w ]+)"'`. But the user said "special characters like '-'". What about dots? Colons? If I use `r'^(.+) as "(.+)"$'`, it's very clear: if it looks like `... as "..."`, it is one. Let's try to see if I can find more examples of `needs_extra_options`. They are just arbitrary keys in the need's data. Actually, I'll go with `r'^(.+) as "(.+)"$'`. It seems the most robust for this specific format. Wait, if I use `^` and `$`, I should make sure I don't break other things. If `option_string` is ` status-desc as "Description" `, it might fail. But `option_string` is already stripped: `_columns = [col.strip() for col in re.split(";|,", columns_str)]`. Let's double check `get_title` logic again. ```python def get_title(option_string: str) -> Tuple[str, str]: if option_string.upper() == "ID": return "ID", "ID" match = re.search(TITLE_REGEX, option_string) if not match: return option_string.upper(), option_string.title().replace("_", " ") ... ``` If I use `TITLE_REGEX = r'^(.+) as "(.+)"$'`, then `re.search` will work fine for `status-desc as "Description"`. For `id`, `option_string.upper() == "ID"` handles it. For `status`, `re.search` will not match, and it returns `('STATUS', 'Status')`. Wait, if I have `status as "Status"`, `re.search` matches, returns `('STATUS', 'Status')`. If I have `status`, `re.search` doesn't match, returns `('STATUS', 'Status')`. Perfect. One more thing: `([ \w]+)` was used for the title. If I use `(.+)` for the title, it allows anything. Is that okay? Probably, since it's inside quotes. Let's compare `r'([\w-]+) as "([\w ]+)"'` vs `r'^(.+) as "(.+)"$'`. The latter is more flexible. Let's try a test with `r'^(.+) as "(.+)"$'` and some edge cases. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import re TITLE_REGEX = r'^(.+) as "(.+)"$' def get_title(option_string): if option_string.upper() == "ID": return "ID", "ID" match = re.search(TITLE_REGEX, option_string) if not match: return option_string.upper(), option_string.title().replace("_", " ") return match.group(1).upper(), match.group(2) test_cases = [ ("id", ("ID", "ID")), ("status", ("STATUS", "Status")), ("status-desc as \"Description\"", ("STATUS-DESC", "Description")), ("my_option as \"My Option\"", ("MY_OPTION", "My Option")), ("complex.option as \"Complex Title!\"", ("COMPLEX.OPTION", "Complex Title!")), (" status-desc as \"Description\" ", (" STATUS-DESC AS \"DESCRIPTION\" ", " Status-Desc As \"Description\" ")), ] for input_str, expected in test_cases: actual = get_title(input_str) print(f"Input: {input_str!r} | Expected: {expected!r} | Actual: {actual!r} | {'OK' if actual == expected else 'FAIL'}") PY <|"|>}<tool_call|><|tool_response>
Turn 11at 457 s736 tokens out15,237 prompt tokens
The anchored regex `r'^(.+) as "(.+)"$'` works perfectly.
One detail: the original regex was `r'([\w]+) as "([\w ]+)"'`. It did NOT have anchors.
So if someone wrote `  status-desc as "Description"  ` without stripping, it would have matched.
But `get_title` is called with already stripped strings.

Wait, if I use `^` and `$`, I'm making it more restrictive by requiring the *entire* string to match the pattern. This is likely what is intended for a column definition.

Actually, let me double check the original regex again: `r'([\w]+) as "([\w ]+)"'`.
It uses `re.search`.
If the string was ` "status-desc as \"Description\"" ` (with quotes around the whole thing), it would still match.
But there's no reason to have that.

Is there any reason NOT to use anchors?
If the user puts something before or after the `option as "Title"` part, they probably intended it to be part of the option or title.

The current `get_title` implementation:
```python
    match = re.search(TITLE_REGEX, option_string)
    if not match:
        return option_string.upper(), option_string.title().replace("_", " ")
```

If I use `r'^(.+) as "(.+)"$'`, then anything that doesn't fit exactly that pattern will be treated as a simple option name. This is correct.

One more thing: the original regex was:
`TITLE_REGEX = r'([\w]+) as "([\w ]+)"'`
If I change it to `r'^(.+) as "(.+)"$'`, I'm changing it from "search for this pattern anywhere in the string" to "the whole string must match this pattern". This is a slight change but probably an improvement and fits the use case.

However, to be as minimal as possible and only fix the bug, maybe I should just change `[\w]+` to `[\w-]+` and `[\w ]+` to `.+`?
Actually, the reported bug is specifically about the first part (`status-desc`).

If I change `TITLE_REGEX` to `r'([\w-]+) as "([\w ]+)"'`, it would fix `status-desc`.
But what if the title has something other than words and spaces?
The original was `[\w ]+`.

The problem says "Custom column titles in needtable does not work if the needs_extra_options has special characters like '-'".
So the primary issue is the first group.

Let's try `r'(.+) as "(.+)"'` ohne anchors first, and see.
If I use `r'(.+) as "(.+)"'`, and the string is `status-desc as "Description"`, then `group(1)` is `status-desc` and `group(2)` is `Description`.
If the string is `status`, no match.
TOOL CALL · edit_file
{
  "filepath": "sphinx_needs/defaults.py",
  "new_string": "TITLE_REGEX = r'^(.+) as \"(.+)\"'",
  "old_string": "TITLE_REGEX = r'([\\w]+) as \"([\\w ]+)\"'"
}
Result of edit_file 367 characters
{
  "status": "ok",
  "filepath": "sphinx_needs/defaults.py",
  "occurrences": 1,
  "strategy": "exact",
  "diff": "--- a/sphinx_needs/defaults.py\n+++ b/sphinx_needs/defaults.py\n@@ -199,7 +199,7 @@\n     \"\"\",\n }\n \n-TITLE_REGEX = r'([\\w]+) as \"([\\w ]+)\"'\n+TITLE_REGEX = r'^(.+) as \"(.+)\"'\n \n \n NEED_DEFAULT_OPTIONS: Dict[str, Any] = {\n",
  "is_truncated": false
}
Generated tokens 736 tokens · stopped: STOP
The anchored regex `r'^(.+) as "(.+)"$'` works perfectly. One detail: the original regex was `r'([\w]+) as "([\w ]+)"'`. It did NOT have anchors. So if someone wrote ` status-desc as "Description" ` without stripping, it would have matched. But `get_title` is called with already stripped strings. Wait, if I use `^` and `$`, I'm making it more restrictive by requiring the *entire* string to match the pattern. This is likely what is intended for a column definition. Actually, let me double check the original regex again: `r'([\w]+) as "([\w ]+)"'`. It uses `re.search`. If the string was ` "status-desc as \"Description\"" ` (with quotes around the whole thing), it would still match. But there's no reason to have that. Is there any reason NOT to use anchors? If the user puts something before or after the `option as "Title"` part, they probably intended it to be part of the option or title. The current `get_title` implementation: ```python match = re.search(TITLE_REGEX, option_string) if not match: return option_string.upper(), option_string.title().replace("_", " ") ``` If I use `r'^(.+) as "(.+)"$'`, then anything that doesn't fit exactly that pattern will be treated as a simple option name. This is correct. One more thing: the original regex was: `TITLE_REGEX = r'([\w]+) as "([\w ]+)"'` If I change it to `r'^(.+) as "(.+)"$'`, I'm changing it from "search for this pattern anywhere in the string" to "the whole string must match this pattern". This is a slight change but probably an improvement and fits the use case. However, to be as minimal as possible and only fix the bug, maybe I should just change `[\w]+` to `[\w-]+` and `[\w ]+` to `.+`? Actually, the reported bug is specifically about the first part (`status-desc`). If I change `TITLE_REGEX` to `r'([\w-]+) as "([\w ]+)"'`, it would fix `status-desc`. But what if the title has something other than words and spaces? The original was `[\w ]+`. The problem says "Custom column titles in needtable does not work if the needs_extra_options has special characters like '-'". So the primary issue is the first group. Let's try `r'(.+) as "(.+)"'` ohne anchors first, and see. If I use `r'(.+) as "(.+)"'`, and the string is `status-desc as "Description"`, then `group(1)` is `status-desc` and `group(2)` is `Description`. If the string is `status`, no match.<channel|><|tool_call>call:edit_file{filepath:<|"|>sphinx_needs/defaults.py<|"|>,new_string:<|"|>TITLE_REGEX = r'^(.+) as "(.+)"'<|"|>,old_string:<|"|>TITLE_REGEX = r'([\w]+) as "([\w ]+)"'<|"|>}<tool_call|><|tool_response>

Patch, tests and logs

Final code change Included
diff --git a/sphinx_needs/defaults.py b/sphinx_needs/defaults.py
index c23903f..a57e253 100644
--- a/sphinx_needs/defaults.py
+++ b/sphinx_needs/defaults.py
@@ -199,7 +199,7 @@ NEEDFLOW_CONFIG_DEFAULTS = {
     """,
 }
 
-TITLE_REGEX = r'([\w]+) as "([\w ]+)"'
+TITLE_REGEX = r'^(.+) as "(.+)"'
 
 
 NEED_DEFAULT_OPTIONS: Dict[str, Any] = {
Test output Included
============================= test session starts ==============================
collected 5 items

tests/test_needtable.py .....                                            [100%]

=============================== warnings summary ===============================
tests/conftest.py:19
  /sphinx-needs/tests/conftest.py:19: RemovedInSphinx90Warning: 'sphinx.testing.path' is deprecated. Use 'os.path' or 'pathlib' instead.
    from sphinx.testing.path import path

tests/test_needtable.py: 30 warnings
  /sphinx-needs/sphinx_needs/environment.py:41: RemovedInSphinx90Warning: 'sphinx.builders.html.StandaloneHTMLBuilder.script_files' is deprecated. Check CHANGES for Sphinx API modifications.
    if hasattr(builder, "script_files") and str(static_data_file) not in builder.script_files:

tests/test_needtable.py: 120 warnings
  /sphinx-needs/sphinx_needs/environment.py:41: RemovedInSphinx90Warning: The str interface for _JavaScript objects is deprecated. Use js.filename instead.
    if hasattr(builder, "script_files") and str(static_data_file) not in builder.script_files:

tests/test_needtable.py: 50 warnings
  /sphinx-needs/sphinx_needs/environment.py:44: RemovedInSphinx90Warning: 'sphinx.builders.html.StandaloneHTMLBuilder.css_files' is deprecated. Check CHANGES for Sphinx API modifications.
    if hasattr(builder, "css_files") and str(static_data_file) not in builder.css_files:

tests/test_needtable.py: 125 warnings
  /sphinx-needs/sphinx_needs/environment.py:44: RemovedInSphinx90Warning: The str interface for _CascadingStyleSheet objects is deprecated. Use css.filename instead.
    if hasattr(builder, "css_files") and str(static_data_file) not in builder.css_files:

tests/test_needtable.py: 20 warnings
  /sphinx-needs/sphinx_needs/environment.py:65: RemovedInSphinx90Warning: 'sphinx.builders.html.StandaloneHTMLBuilder.css_files' is deprecated. Check CHANGES for Sphinx API modifications.
    files = getattr(app.builder, attribute, [])

tests/test_needtable.py: 80 warnings
  /sphinx-needs/sphinx_needs/environment.py:66: RemovedInSphinx90Warning: The str interface for _CascadingStyleSheet objects is deprecated. Use css.filename instead.
    if str(file) in files:

tests/test_needtable.py::test_doc_build_html[test_app0]
tests/test_needtable.py::test_doc_needtable_options[test_app0]
tests/test_needtable.py::test_doc_needtable_styles[test_app0]
tests/test_needtable.py::test_doc_needtable_parts[test_app0]
tests/test_needtable.py::test_doc_needtable_titles[test_app0]
  /sphinx-needs/sphinx_needs/directives/need.py:377: RemovedInSphinx90Warning: Tags.tags is deprecated, use methods on Tags.
    resolve_variants_options(needs, needs_config, app.builder.tags.tags)

-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
==================================== PASSES ====================================
- generated xml file: /tmp/rebench-grade-78d9bb5aebdb438c9cc42d89c0c2d514.xml --
--------------------------- snapshot report summary ----------------------------

=========================== short test summary info ============================
PASSED tests/test_needtable.py::test_doc_build_html[test_app0]
PASSED tests/test_needtable.py::test_doc_needtable_options[test_app0]
PASSED tests/test_needtable.py::test_doc_needtable_styles[test_app0]
PASSED tests/test_needtable.py::test_doc_needtable_parts[test_app0]
PASSED tests/test_needtable.py::test_doc_needtable_titles[test_app0]
======================= 5 passed, 431 warnings in 4.02s ========================
Test errors Included
Test report (JUnit) Included
<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite name="pytest" errors="0" failures="0" skipped="0" tests="5" time="4.027" timestamp="2026-11-14T04:56:45.801669" hostname="9faf4d6b24bd"><testcase classname="tests.test_needtable" name="test_doc_build_html[test_app0]" time="1.157" /><testcase classname="tests.test_needtable" name="test_doc_needtable_options[test_app0]" time="0.721" /><testcase classname="tests.test_needtable" name="test_doc_needtable_styles[test_app0]" time="0.697" /><testcase classname="tests.test_needtable" name="test_doc_needtable_parts[test_app0]" time="0.695" /><testcase classname="tests.test_needtable" name="test_doc_needtable_titles[test_app0]" time="0.728" /></testsuite></testsuites>
Agent log Included
  [   0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
  [   0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository useblocks/sphinx-needs.
  [  19.6s] 💭 (612 chars) "The user is reporting a bug in `needtable` where custom column titles do not work if the 
`needs_extra_options` (the fiel..."
  [  19.6s] 🔧 run_command grep -rn "columns" sphinx_needs/directives/needtable.py
  [  19.7s]   → 37:        "columns": directives.unchanged_required,
  [  35.3s] 💭 (530 chars) "The grep output shows that `columns` are processed starting around line 56 in 
`sphinx_needs/directives/needtable.py`.
It..."
  [  35.3s] 📖 read_file (sphinx_needs/directives/needtable.py)
  [  35.4s]   ✓ {'status': 'ok', 'filepath': 'sphinx_needs/directives/needtable.py', 'content': 'import re\nfrom typing 
import Any, Call…
  [  42.3s] 💭 (111 chars) "`get_title` is imported from `sphinx_needs.directives.utils`. Let's examine 
`sphinx_needs/directives/utils.py`."
  [  42.3s] 📖 read_file (sphinx_needs/directives/utils.py)
  [  42.3s]   ✓ {'status': 'ok', 'filepath': 'sphinx_needs/directives/utils.py', 'content': 'import re\nfrom typing 
import Any, Dict, Li…
  [  46.7s] 💭 (112 chars) "`get_title` is using `TITLE_REGEX`. Let's see what `TITLE_REGEX` is. It's imported from 
`sphinx_needs.defaults`."
  [  46.7s] 📖 read_file (sphinx_needs/defaults.py)
  [  46.7s]   ✓ {'status': 'ok', 'filepath': 'sphinx_needs/defaults.py', 'content': 'import os\nfrom typing import Any, 
Dict\n\nfrom doc…
  [  55.3s] 💭 (115 chars) "Wait, `TITLE_REGEX` was not in the first 150 lines of `sphinx_needs/defaults.py`. Let me 
read the rest of the file."
  [  55.3s] 📖 read_file (sphinx_needs/defaults.py)
  [  55.3s]   ✓ {'status': 'ok', 'filepath': 'sphinx_needs/defaults.py', 'content': '    }\n\n    skinparam interface 
{\n      Backgroun…
  [ 110.6s] 💭 (1405 chars) "Found it:
`TITLE_REGEX = r'([\w]+) as "([\w ]+)"'`

The issue is that `[\w]+` only matches alphanumeric characters and u..."
  [ 110.6s] 🔧 run_command (17 lines) python3 - <<'PY'
  [ 111.3s]   → Input: 'id' | Expected: ('ID', 'ID') | Actual: ('ID', 'ID') | OK
  [ 160.5s] 💭 (1121 chars) "Wait, look at the output:
`Input: 'status-desc as "Description"' | Expected: ('STATUS-DESC', 'Description') | Actual: ('..."
  [ 160.5s] 🔧 run_command (29 lines) python3 - <<'PY'
  [ 160.6s]   → Old: ('desc', 'Description')
  [ 187.5s] 💭 (988 chars) "The new regex `r'([^\s]+) as "([^\"]+)"'` seems much better. It captures anything 
non-whitespace for the option name, an..."
  [ 187.5s] 🔧 run_command grep -rn "TITLE_REGEX" .
  [ 187.6s]   → ./sphinx_needs/directives/utils.py:9:from sphinx_needs.defaults import TITLE_REGEX
  [ 275.9s] 💭 (2773 chars) "It's only used in `get_title` in `sphinx_needs/directives/utils.py`.

Let's verify if `([^\s]+) as "([^\"]+)"` is too br..."
  [ 275.9s] 🔧 run_command (32 lines) python3 - <<'PY'
  [ 276.0s]   → Testing Proposal 1:
  [ 393.6s] 💭 (5114 chars) "Wait, `('ID', 'Id') | OK: False` for `id`.
The `expected` was `('ID', 'ID')`.
In `get_title` source code:
```python
    ..."
  [ 393.6s] 🔧 run_command (24 lines) python3 - <<'PY'
  [ 393.7s]   → Input: 'id' | Expected: ('ID', 'ID') | Actual: ('ID', 'ID') | OK
  [ 439.0s] 💭 (2364 chars) "The anchored regex `r'^(.+) as "(.+)"$'` works perfectly.
One detail: the original regex was `r'([\w]+) as "([\w ]+)"'`...."
  [ 439.0s] ✏️ edit_file (sphinx_needs/defaults.py)
  [ 439.2s]   ✓ {'status': 'ok', 'filepath': 'sphinx_needs/defaults.py', 'occurrences': 1, 'strategy': 'exact', 'diff': 
'--- a/sphinx_ne…
Native result row
{
  "agent_error": "Agent exceeded session timeout (7.5 min)",
  "duration_seconds": 476.45,
  "error": "Agent exceeded session timeout (7.5 min)",
  "grade": {
    "collected_tests": 5,
    "competition_junit_ok": true,
    "error": null,
    "required_issues_count": 0,
    "resolved": true,
    "status_counts": {
      "PASSED": 5
    },
    "strict_clean_patch": true,
    "test_exit_code": 0
  },
  "instance_id": "useblocks__sphinx-needs-1102",
  "pass_idx": 0,
  "patch_chars": 341,
  "phase1_seconds": 470.47,
  "repo": "useblocks/sphinx-needs",
  "request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/useblocks__sphinx-needs-1102__p0__r2.jsonl",
  "resolved": true,
  "rollout_idx": 2,
  "run_key": "useblocks__sphinx-needs-1102__p0__r2",
  "strict_clean_patch": true,
  "tool_calls": 11,
  "total_llm_calls": 11,
  "trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_useblocks__sphinx-needs-1102__p0__r2.json"
}