← 31B real rollouts · 480 (exact stack, 32 lanes, 13-Nov)

ROLLOUT 3 · 2gis/k8s-handle

2gis__k8s-handle-120

Not solved

454 stotal time

20tool calls

20model calls

6,695tokens generated

172,672prompt tokens read

Test failures/errors recorded in JUnit XML (failures=1, errors=0)

Turn by turn

Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.

System instructions 4,822 characters

You are a principal Python software engineer resolving a repository issue in `/workspace`.
Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run.

## Critical Environment & Grader Rules
1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`.
2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files.
3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`.
4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks:
`pytest path/to/test_file.py -k pattern -q --tb=short --no-header`
If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off.
5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission.

## Execution Protocol

### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls)
- The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories.
- Run a single compound `run_command` with `grep -rn --include="*.py"` to locate:
(a) the exact symbols, error strings, or functions from the problem description,
(b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and
(c) the closest existing unit test files under `tests/`.

### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls)
- Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests.
- Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types.

### Phase 3 — Reproduce Bug in One Call (1 tool call)
- Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts.

### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls)
- Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`.
- Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests.
- **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`.

### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls)
- Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`.
- Run `git status --short && git diff` via `run_command`. Confirm:
- ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately),
- ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched),
- Minimal, clean diff with valid imports and indentation.
- Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.

Task prompt 3,349 characters

You are evaluating a software engineering task for repository 2gis/k8s-handle.

Problem Statement:
skip-tags does not work
Hello,
it seems `--skip-tags` does not work. Steps to reproduce:
```
git clone git@github.com:2gis/k8s-handle-example.git
```
Edit config.yaml, add some tag
```
staging:
  templates:
  - template: configmap.yaml.j2
  - template: deployment.yaml.j2
  - template: service.yaml.j2
    tags: manual
```
Render is empty:
```
$ docker run --rm -v `pwd`:/tmp -w /tmp 2gis/k8s-handle k8s-handle render -s staging --skip-tags manual

                         _(_)_                          wWWWw   _
             @@@@       (_)@(_)   vVVVv     _     @@@@  (___) _(_)_
            @@()@@ wWWWw  (_)\    (___)   _(_)_  @@()@@   Y  (_)@(_)
             @@@@  (___)     `|/    Y    (_)@(_)  @@@@   \|/   (_)
              /      Y       \|    \|/    /(_)    \|      |/      |
           \ |     \ |/       | / \ | /  \|/       |/    \|      \|/
            \|//    \|///    \|//  \|/// \|///    \|//    |//    \|//
       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
```

## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns

## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.

## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./Dockerfile
./LICENSE
./README.md
./_config.yml
./docker-compose.yml
./helmVsK8s-handle.png
./k8s_handle
./k8s_handle/__init__.py
./k8s_handle/config.py
./k8s_handle/dictionary.py
./k8s_handle/exceptions.py
./k8s_handle/filesystem.py
./k8s_handle/k8s
./k8s_handle/k8s/__init__.py
./k8s_handle/k8s/adapters.py
./k8s_handle/k8s/api_extensions.py
./k8s_handle/k8s/availability_checker
./k8s_handle/k8s/deprecation_checker.py
./k8s_handle/k8s/fixtures
./k8s_handle/k8s/mocks.py
./k8s_handle/k8s/provisioner.py
./k8s_handle/k8s/test_adapters.py
./k8s_handle/k8s/test_deprecation_checker.py
./k8s_handle/k8s/test_provisioner.py
./k8s_handle/settings.py
./k8s_handle/templating.py
./k8s_handle/transforms.py
./requirements.txt
./setup.py
./tests
./tox.ini
```

Turn 1at 25 s294 tokens out3,091 prompt tokens

The user is reporting that `--skip-tags` does not work in `k8s-handle render`.
Looking at the reproduction steps:
1. A config file has templates, one of which has `tags: manual`.
2. Running `k8s-handle render -s staging --skip-tags manual` results in empty output, meaning it rendeered nothing, or possibly it rendered everything and skipped nothing?
Wait, the reproduction says "Render is empty".
In the example:
- staging has 3 templates: `configmap.yaml.j2`, `deployment.yaml.j2`, `service.yaml.j2`.
- `service.yaml.j2` has `tags: manual`.
- Command: `k8s-handle render -s staging --skip-tags manual`.
- Expectation: `configmap.yaml.j2` and `deployment.yaml.j2` should be rendered.
- Actual result: Render is empty.

This suggests that `--skip-tags manual` might be skipping EVERYTHING instead of just those with the tag `manual`, or it's not working as expected.

Let's start by exploring the code to find where `--skip-tags` is handled.

TOOL CALL · run_command

{
  "command": "grep -rn --include=\"*.py\" \"skip-tags\" ."
}

Result of run_command 172 characters

{
  "status": "ok",
  "stdout": "./k8s_handle/__init__.py:133:parser_target_config.add_argument('--skip-tags', action='append', required=False,\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 294 tokens · stopped: STOP

<|channel>thought The user is reporting that `--skip-tags` does not work in `k8s-handle render`. Looking at the reproduction steps: 1. A config file has templates, one of which has `tags: manual`. 2. Running `k8s-handle render -s staging --skip-tags manual` results in empty output, meaning it rendeered nothing, or possibly it rendered everything and skipped nothing? Wait, the reproduction says "Render is empty". In the example: - staging has 3 templates: `configmap.yaml.j2`, `deployment.yaml.j2`, `service.yaml.j2`. - `service.yaml.j2` has `tags: manual`. - Command: `k8s-handle render -s staging --skip-tags manual`. - Expectation: `configmap.yaml.j2` and `deployment.yaml.j2` should be rendered. - Actual result: Render is empty. This suggests that `--skip-tags manual` might be skipping EVERYTHING instead of just those with the tag `manual`, or it's not working as expected. Let's start by exploring the code to find where `--skip-tags` is handled.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "skip-tags" .<|"|>}<tool_call|><|tool_response>

Turn 2at 32 s79 tokens out3,461 prompt tokens

Okay, `--skip-tags` is defined in `k8s_handle/__init__.py`. Let's see how it's used.
I'll search for where `args.skip_tags` is used.

TOOL CALL · run_command

{
  "command": "grep -rn --include=\"*.py\" \"skip_tags\" ."
}

Result of run_command 1,056 characters

{
  "status": "ok",
  "stdout": "./k8s_handle/templating.py:197:    def _evaluate_tags(tags, only_tags, skip_tags):\n./k8s_handle/templating.py:198:        if only_tags is None and skip_tags is None:\n./k8s_handle/templating.py:201:        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)\n./k8s_handle/__init__.py:48:        args.get('skip_tags')\n./k8s_handle/__init__.py:57:        args.get('skip_tags')\n./tests/test_templating.py:109:        self.assertTrue(r._evaluate_tags(tags, only_tags=['tag1'], skip_tags=None))\n./tests/test_templating.py:110:        self.assertFalse(r._evaluate_tags(tags, only_tags=['tag4'], skip_tags=None))\n./tests/test_templating.py:111:        self.assertFalse(r._evaluate_tags(tags, only_tags=['tag1'], skip_tags=['tag1']))\n./tests/test_templating.py:112:        self.assertFalse(r._evaluate_tags(tags, only_tags=None, skip_tags=['tag1']))\n./tests/test_templating.py:113:        self.assertTrue(r._evaluate_tags(tags, only_tags=None, skip_tags=['tag4']))\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 79 tokens · stopped: STOP

Okay, `--skip-tags` is defined in `k8s_handle/__init__.py`. Let's see how it's used. I'll search for where `args.skip_tags` is used. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "skip_tags" .<|"|>}<tool_call|><|tool_response>

Turn 3at 40 s136 tokens out3,948 prompt tokens

It seems `k8s_handle/templating.py` has an `_evaluate_tags` method.
Let's examine `k8s_handle/templating.py` around line 197.
Also let's check `k8s_handle/__init__.py` to see how `skip_tags` is passed to the render logic.

First, `k8s_handle/templating.py`.

TOOL CALL · read_file

{
  "end_line": 220,
  "filepath": "k8s_handle/templating.py",
  "start_line": 180
}

Result of read_file 851 characters

{
  "status": "ok",
  "filepath": "k8s_handle/templating.py",
  "content": "\n    @staticmethod\n    def _get_template_tags(template):\n        if 'tags' not in template:\n            return set()\n\n        tags = template['tags']\n\n        if isinstance(tags, list):\n            return set([i for i, _ in itertools.groupby(tags)])\n\n        if isinstance(tags, str):\n            return set(tags.split(','))\n\n        raise TypeError('Unable to parse tags of \"{}\" template: unexpected type {}'.format(template, type(tags)))\n\n    @staticmethod\n    def _evaluate_tags(tags, only_tags, skip_tags):\n        if only_tags is None and skip_tags is None:\n            return True\n\n        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)",
  "start_line": 180,
  "end_line": 201,
  "total_lines": 201,
  "is_truncated": false
}

Generated tokens 136 tokens · stopped: STOP

It seems `k8s_handle/templating.py` has an `_evaluate_tags` method. Let's examine `k8s_handle/templating.py` around line 197. Also let's check `k8s_handle/__init__.py` to see how `skip_tags` is passed to the render logic. First, `k8s_handle/templating.py`.<channel|><|tool_call>call:read_file{filepath:<|"|>k8s_handle/templating.py<|"|>,start_line:180,end_line:220}<tool_call|><|tool_response>

Turn 4at 97 s841 tokens out4,360 prompt tokens

Wait, let's look at `_evaluate_tags` again:
```python
    @staticmethod
    def _evaluate_tags(tags, only_tags, skip_tags):
        if only_tags is None and skip_tags is None:
            return True

        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)
```

Let's analyze this logic:
- `tags`: The tags of the template.
- `only_tags`: Tags that MUST be present.
- `skip_tags`: Tags that MUST NOT be present.

If `only_tags` is `None` and `skip_tags` is `None`, return `True`.
Otherwise:
`tags.isdisjoint(skip_tags or [])` -> returns `True` if no tag in `tags` is in `skip_tags`. This is correct for skipping.
`and not tags.isdisjoint(only_tags or tags)`
If `only_tags` is `None`, then `only_tags or tags` becomes `tags`.
So `tags.isdisjoint(tags)` is `False` (unless `tags` is empty).
And `not False` is `True`.
So if `only_tags` is `None`, it becomes `not tags.isdisjoint(tags)`, which is `True` as long as `tags` is not empty.
Wait, what if `tags` is empty?
If `tags = set()`, then `not set().isdisjoint(set())` is `not True`, which is `False`.
So if a template has NO tags, and `only_tags` is `None` (but `skip_tags` is provided), `_evaluate_tags` returns `False`!

This is likely the bug. If a template has no tags, it should not be skipped unless it matches `only_tags` (but if `only_tags` is `None`, it shouldn't be restricted).

Let's verify this with a reproduction script.
If `tags = set()`, `only_tags = None`, `skip_tags = ['manual']`:
`tags.isdisjoint(['manual'])` is `True`.
`only_tags or tags` is `set()`.
`tags.isdisjoint(set())` is `True`.
`not True` is `False`.
Result: `False`.

So any template without tags is being skipped if `skip_tags` is specified!

Let's create a reproduction script to confirm this.

TOOL CALL · run_command

{
  "command": "python3 - <<'PY'\nfrom k8s_handle.templating import Templating\nprint(f\"tags={set()}, only={None}, skip={None} -> {Templating._evaluate_tags(set(), None, None)}\")\nprint(f\"tags={set()}, only={None}, skip={['manual']} -> {Templating._evaluate_tags(set(), None, ['manual'])}\")\nprint(f\"tags={'manual'}, only={None}, skip={['manual']} -> {Templating._evaluate_tags({'manual'}, None, ['manual'])}\")\nprint(f\"tags={'other'}, only={None}, skip={['manual']} -> {Templating._evaluate_tags({'other'}, None, ['manual'])}\")\nprint(f\"tags={'manual'}, only={'manual'}, skip={None} -> {Templating._evaluate_tags({'manual'}, ['manual'], None)}\")\nprint(f\"tags={'other'}, only={'manual'}, skip={None} -> {Templating._evaluate_tags({'other'}, ['manual'], None)}\")\nprint(f\"tags={'manual'}, only={'manual'}, skip={['manual']} -> {Templating._evaluate_tags({'manual'}, ['manual'], ['manual'])}\")\nPY\n"
}

Result of run_command 507 characters

{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "Traceback (most recent call last):\n  File \"<stdin>\", line 1, in <module>\nImportError: cannot import name 'Templating' from 'k8s_handle.templating' (/workspace/k8s_handle/templating.py)\n",
  "details": {
    "stdout": "",
    "stderr": "Traceback (most recent call last):\n  File \"<stdin>\", line 1, in <module>\nImportError: cannot import name 'Templating' from 'k8s_handle.templating' (/workspace/k8s_handle/templating.py)\n",
    "exit_code": 1
  }
}

Generated tokens 841 tokens · stopped: STOP

Wait, let's look at `_evaluate_tags` again: ```python @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if only_tags is None and skip_tags is None: return True return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags) ``` Let's analyze this logic: - `tags`: The tags of the template. - `only_tags`: Tags that MUST be present. - `skip_tags`: Tags that MUST NOT be present. If `only_tags` is `None` and `skip_tags` is `None`, return `True`. Otherwise: `tags.isdisjoint(skip_tags or [])` -> returns `True` if no tag in `tags` is in `skip_tags`. This is correct for skipping. `and not tags.isdisjoint(only_tags or tags)` If `only_tags` is `None`, then `only_tags or tags` becomes `tags`. So `tags.isdisjoint(tags)` is `False` (unless `tags` is empty). And `not False` is `True`. So if `only_tags` is `None`, it becomes `not tags.isdisjoint(tags)`, which is `True` as long as `tags` is not empty. Wait, what if `tags` is empty? If `tags = set()`, then `not set().isdisjoint(set())` is `not True`, which is `False`. So if a template has NO tags, and `only_tags` is `None` (but `skip_tags` is provided), `_evaluate_tags` returns `False`! This is likely the bug. If a template has no tags, it should not be skipped unless it matches `only_tags` (but if `only_tags` is `None`, it shouldn't be restricted). Let's verify this with a reproduction script. If `tags = set()`, `only_tags = None`, `skip_tags = ['manual']`: `tags.isdisjoint(['manual'])` is `True`. `only_tags or tags` is `set()`. `tags.isdisjoint(set())` is `True`. `not True` is `False`. Result: `False`. So any template without tags is being skipped if `skip_tags` is specified! Let's create a reproduction script to confirm this. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' from k8s_handle.templating import Templating print(f"tags={set()}, only={None}, skip={None} -> {Templating._evaluate_tags(set(), None, None)}") print(f"tags={set()}, only={None}, skip={['manual']} -> {Templating._evaluate_tags(set(), None, ['manual'])}") print(f"tags={'manual'}, only={None}, skip={['manual']} -> {Templating._evaluate_tags({'manual'}, None, ['manual'])}") print(f"tags={'other'}, only={None}, skip={['manual']} -> {Templating._evaluate_tags({'other'}, None, ['manual'])}") print(f"tags={'manual'}, only={'manual'}, skip={None} -> {Templating._evaluate_tags({'manual'}, ['manual'], None)}") print(f"tags={'other'}, only={'manual'}, skip={None} -> {Templating._evaluate_tags({'other'}, ['manual'], None)}") print(f"tags={'manual'}, only={'manual'}, skip={['manual']} -> {Templating._evaluate_tags({'manual'}, ['manual'], ['manual'])}") PY <|"|>}<tool_call|><|tool_response>

Turn 5at 107 s106 tokens out5,380 prompt tokens

Ah, I should check if it's a class or just functions. Let me check `k8s_handle/templating.py` again.
Wait, I saw `@staticmethod` in the `read_file` output, so there must be a class. Let's read the beginning of the file.

TOOL CALL · read_file

{
  "end_line": 100,
  "filepath": "k8s_handle/templating.py",
  "start_line": 1
}

Result of read_file 3,732 characters

{
  "status": "ok",
  "filepath": "k8s_handle/templating.py",
  "content": "import base64\nimport glob\nimport itertools\nimport logging\nimport os\nimport re\nfrom hashlib import sha256\n\nimport yaml\nfrom jinja2 import Environment, FileSystemLoader, StrictUndefined\nfrom jinja2.exceptions import TemplateNotFound, TemplateSyntaxError, UndefinedError\n\nfrom k8s_handle import settings\nfrom k8s_handle.exceptions import TemplateRenderingError\n\nlog = logging.getLogger(__name__)\n\n\ndef get_template_contexts(file_path):\n    try:\n        with open(file_path) as f:\n            try:\n                contexts = yaml.safe_load_all(f.read())\n            except Exception as e:\n                raise RuntimeError('Unable to load yaml file: {}, {}'.format(file_path, e))\n\n            for context in contexts:\n                if context is None:\n                    continue  # Skip empty YAML documents\n                if 'kind' not in context or context['kind'] is None:\n                    raise RuntimeError('Field \"kind\" not found (or empty) in file \"{}\"'.format(file_path))\n                if 'metadata' not in context or context['metadata'] is None:\n                    raise RuntimeError('Field \"metadata\" not found (or empty) in file \"{}\"'.format(file_path))\n                if 'name' not in context['metadata'] or context['metadata']['name'] is None:\n                    raise RuntimeError('Field \"metadata->name\" not found (or empty) in file \"{}\"'.format(file_path))\n                if 'spec' in context:\n                    # INFO: Set replicas = 1 by default for replaces cases in Deployment and StatefulSet\n                    if 'replicas' not in context['spec'] or context['spec']['replicas'] is None:\n                        if context['kind'] in ['Deployment', 'StatefulSet']:\n                            context['spec']['replicas'] = 1\n                yield context\n    except FileNotFoundError as e:\n        raise RuntimeError(e)\n\n\ndef b64decode(string):\n    res = base64.decodebytes(string.encode())\n    return res.decode()\n\n\ndef b64encode(string):\n    res = base64.b64encode(string.encode())\n    return res.decode()\n\n\ndef hash_sha256(string):\n    res = sha256()\n    res.update(string.encode('utf-8'))\n    return res.hexdigest()\n\n\ndef to_yaml(data, flow_style=True, width=99999):\n    return yaml.safe_dump(data, default_flow_style=flow_style, width=width)\n\n\ndef get_env(templates_dir):\n    # https://stackoverflow.com/questions/9767585/insert-static-files-literally-into-jinja-templates-without-parsing-them\n    def include_file(path):\n        path = os.path.join(templates_dir, '../', path)\n        output = []\n        for file_path in glob.glob(path):\n            with open(file_path, 'r') as f:\n                output.append(f.read())\n        return '\\n'.join(output)\n\n    env = Environment(\n        undefined=StrictUndefined,\n        loader=FileSystemLoader([templates_dir]))\n\n    env.filters['b64decode'] = b64decode\n    env.filters['b64encode'] = b64encode\n    env.filters['hash_sha256'] = hash_sha256\n    env.filters['to_yaml'] = to_yaml\n    env.globals['include_file'] = include_file\n\n    log.debug('Available templates in path {}: {}'.format(templates_dir, env.list_templates()))\n    return env\n\n\nclass Renderer:\n    def __init__(self, templates_dir, tags=None, tags_skip=None):\n        self._templates_dir = templates_dir\n        self._tags = tags\n        self._tags_skip = tags_skip\n        self._env = get_env(self._templates_dir)\n\n    def _iterate_entries(self, entries, tags=None):\n        if tags is None:\n            tags = set()\n",
  "start_line": 1,
  "end_line": 100,
  "total_lines": 201,
  "is_truncated": false
}

Generated tokens 106 tokens · stopped: STOP

Ah, I should check if it's a class or just functions. Let me check `k8s_handle/templating.py` again. Wait, I saw `@staticmethod` in the `read_file` output, so there must be a class. Let's read the beginning of the file. <channel|><|tool_call>call:read_file{end_line:100,filepath:<|"|>k8s_handle/templating.py<|"|>,start_line:1}<tool_call|><|tool_response>

Turn 6at 119 s290 tokens out6,584 prompt tokens

The class is named `Renderer`. My mistake.

Let's try the reproduction script again.

TOOL CALL · run_command

{
  "command": "python3 - <<'PY'\nfrom k8s_handle.templating import Renderer\nprint(f\"tags=set(), only={None}, skip={None} -> {Renderer._evaluate_tags(set(), None, None)}\")\nprint(f\"tags=set(), only={None}, skip={['manual']} -> {Renderer._evaluate_tags(set(), None, ['manual'])}\")\nprint(f\"tags={'manual'}, only={None}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, None, ['manual'])}\")\nprint(f\"tags={'other'}, only={None}, skip={['manual']} -> {Renderer._evaluate_tags({'other'}, None, ['manual'])}\")\nprint(f\"tags={'manual'}, only={'manual'}, skip={None} -> {Renderer._evaluate_tags({'manual'}, ['manual'], None)}\")\nprint(f\"tags={'other'}, only={'manual'}, skip={None} -> {Renderer._evaluate_tags({'other'}, ['manual'], None)}\")\nprint(f\"tags={'manual'}, only={'manual'}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, ['manual'], ['manual'])}\")\nPY\n"
}

Result of run_command 391 characters

{
  "status": "ok",
  "stdout": "tags=set(), only=None, skip=None -> True\ntags=set(), only=None, skip=['manual'] -> False\ntags=manual, only=None, skip=['manual'] -> False\ntags=other, only=None, skip=['manual'] -> True\ntags=manual, only=manual, skip=None -> True\ntags=other, only=manual, skip=None -> False\ntags=manual, only=manual, skip=['manual'] -> False\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 290 tokens · stopped: STOP

The class is named `Renderer`. My mistake. Let's try the reproduction script again. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' from k8s_handle.templating import Renderer print(f"tags=set(), only={None}, skip={None} -> {Renderer._evaluate_tags(set(), None, None)}") print(f"tags=set(), only={None}, skip={['manual']} -> {Renderer._evaluate_tags(set(), None, ['manual'])}") print(f"tags={'manual'}, only={None}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, None, ['manual'])}") print(f"tags={'other'}, only={None}, skip={['manual']} -> {Renderer._evaluate_tags({'other'}, None, ['manual'])}") print(f"tags={'manual'}, only={'manual'}, skip={None} -> {Renderer._evaluate_tags({'manual'}, ['manual'], None)}") print(f"tags={'other'}, only={'manual'}, skip={None} -> {Renderer._evaluate_tags({'other'}, ['manual'], None)}") print(f"tags={'manual'}, only={'manual'}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, ['manual'], ['manual'])}") PY <|"|>}<tool_call|><|tool_response>

Turn 7at 145 s442 tokens out7,021 prompt tokens

Wait, the output for `tags=set(), only=None, skip=['manual']` is `False`.
This confirms my suspicion: if a template has no tags, it's skipped if `skip_tags` is provided.

Wait, look at the output:
`tags=set(), only=None, skip=['manual'] -> False`
`tags=manual, only=None, skip=['manual'] -> False` (Wait, `tags` here was passed as string "manual", but it should be a set)
Ah, I see my reproduction script passed strings instead of sets for tags in some cases.
Let's refine the reproduction script to use sets for `tags` (since that's what `_get_template_tags` returns).

TOOL CALL · run_command

{
  "command": "python3 - <<'PY'\nfrom k8s_handle.templating import Renderer\nprint(f\"tags=set(), only=None, skip=None -> {Renderer._evaluate_tags(set(), None, None)}\")\nprint(f\"tags=set(), only=None, skip={['manual']} -> {Renderer._evaluate_tags(set(), None, ['manual'])}\")\nprint(f\"tags={{'manual'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, None, ['manual'])}\")\nprint(f\"tags={{'other'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'other'}, None, ['manual'])}\")\nprint(f\"tags={{'manual'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'manual'}, ['manual'], None)}\")\nprint(f\"tags={{'other'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'other'}, ['manual'], None)}\")\nprint(f\"tags={{'manual'}}, only={['manual']}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, ['manual'], ['manual'])}\")\nPY\n"
}

Result of run_command 423 characters

{
  "status": "ok",
  "stdout": "tags=set(), only=None, skip=None -> True\ntags=set(), only=None, skip=['manual'] -> False\ntags={'manual'}, only=None, skip=['manual'] -> False\ntags={'other'}, only=None, skip=['manual'] -> True\ntags={'manual'}, only=['manual'], skip=None -> True\ntags={'other'}, only=['manual'], skip=None -> False\ntags={'manual'}, only=['manual'], skip=['manual'] -> False\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 442 tokens · stopped: STOP

Wait, the output for `tags=set(), only=None, skip=['manual']` is `False`. This confirms my suspicion: if a template has no tags, it's skipped if `skip_tags` is provided. Wait, look at the output: `tags=set(), only=None, skip=['manual'] -> False` `tags=manual, only=None, skip=['manual'] -> False` (Wait, `tags` here was passed as string "manual", but it should be a set) Ah, I see my reproduction script passed strings instead of sets for tags in some cases. Let's refine the reproduction script to use sets for `tags` (since that's what `_get_template_tags` returns). <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' from k8s_handle.templating import Renderer print(f"tags=set(), only=None, skip=None -> {Renderer._evaluate_tags(set(), None, None)}") print(f"tags=set(), only=None, skip={['manual']} -> {Renderer._evaluate_tags(set(), None, ['manual'])}") print(f"tags={{'manual'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, None, ['manual'])}") print(f"tags={{'other'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'other'}, None, ['manual'])}") print(f"tags={{'manual'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'manual'}, ['manual'], None)}") print(f"tags={{'other'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'other'}, ['manual'], None)}") print(f"tags={{'manual'}}, only={['manual']}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, ['manual'], ['manual'])}") PY <|"|>}<tool_call|><|tool_response>

Turn 8at 203 s994 tokens out7,610 prompt tokens

Yes, `tags=set(), only=None, skip=['manual'] -> False`.
This is definitely wrong. If no tags are specified for a template, it should not be excluded just because some tags are being skipped globally.

The logic `not tags.isdisjoint(only_tags or tags)` is meant to ensure that if `only_tags` is specified, the template must have at least one of those tags.
But if `only_tags` is `None`, it evaluates to `not tags.isdisjoint(tags)`, which is `False` if `tags` is empty.

Wait, if `only_tags` is `None`, then any template should be accepted (unless it's skipped).
So if `only_tags` is `None`, the `only_tags` part should be effectively `True`.

Correct logic for `_evaluate_tags`:
1. If it has any tag that is in `skip_tags`, it must be skipped.
2. If `only_tags` is specified, it must have at least one tag from `only_tags`.
3. If `only_tags` is NOT specified, any template that wasn't skipped should be kept.

Let's rewrite the logic:
```python
    @staticmethod
    def _evaluate_tags(tags, only_tags, skip_tags):
        if skip_tags:
            if not tags.isdisjoint(skip_tags):
                return False
        if only_tags:
            if tags.isdisjoint(only_tags):
                return False
        return True
```
Wait, `only_tags` and `skip_tags` are passed as lists/sets from the caller.
If they are `None`, they should be treated as empty collections.

Let's test this revised logic with the cases:
- `tags=set(), only=None, skip=None` -> `True`
- `tags=set(), only=None, skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. No return `False` yet. `only_tags` is `None`. Returns `True`. (Correct)
- `tags={'manual'}, only=None, skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. Returns `False`. (Correct)
- `tags={'other'}, only=None, skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. `only_tags` is `None`. Returns `True`. (Correct)
- `tags={'manual'}, only=['manual'], skip=None` -> `skip_tags` is `None`. `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. Returns `True`. Wait, no.
If `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. `if False: return False` -> doesn't return. Returns `True`. (Correct)
- `tags={'other'}, only=['manual'], skip=None` -> `skip_tags` is `None`. `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. Returns `False`. (Correct)
- `tags={'manual'}, only=['manual'], skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. Returns `False`. (Correct)

Wait, what if `only_tags` is provided but `tags` is empty?
`tags=set(), only=['manual'], skip=None` -> `skip_tags` is `None`. `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. Returns `False`. (Correct)

So the revised logic seems sound.

Let's check how `only_tags` and `skip_tags` are passed to `_evaluate_tags` in `k8s_handle/templating.py` to make sure they are passed as expected.

I'll read `k8s_handle/templating.py` again, but looking for calls to `_evaluate_tags`.

TOOL CALL · run_command

{
  "command": "grep -rn \" _evaluate_tags\" k8s_handle/templating.py"
}

Result of run_command 117 characters

{
  "status": "ok",
  "stdout": "197:    def _evaluate_tags(tags, only_tags, skip_tags):\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 994 tokens · stopped: STOP

Yes, `tags=set(), only=None, skip=['manual'] -> False`. This is definitely wrong. If no tags are specified for a template, it should not be excluded just because some tags are being skipped globally. The logic `not tags.isdisjoint(only_tags or tags)` is meant to ensure that if `only_tags` is specified, the template must have at least one of those tags. But if `only_tags` is `None`, it evaluates to `not tags.isdisjoint(tags)`, which is `False` if `tags` is empty. Wait, if `only_tags` is `None`, then any template should be accepted (unless it's skipped). So if `only_tags` is `None`, the `only_tags` part should be effectively `True`. Correct logic for `_evaluate_tags`: 1. If it has any tag that is in `skip_tags`, it must be skipped. 2. If `only_tags` is specified, it must have at least one tag from `only_tags`. 3. If `only_tags` is NOT specified, any template that wasn't skipped should be kept. Let's rewrite the logic: ```python @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if skip_tags: if not tags.isdisjoint(skip_tags): return False if only_tags: if tags.isdisjoint(only_tags): return False return True ``` Wait, `only_tags` and `skip_tags` are passed as lists/sets from the caller. If they are `None`, they should be treated as empty collections. Let's test this revised logic with the cases: - `tags=set(), only=None, skip=None` -> `True` - `tags=set(), only=None, skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. No return `False` yet. `only_tags` is `None`. Returns `True`. (Correct) - `tags={'manual'}, only=None, skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. Returns `False`. (Correct) - `tags={'other'}, only=None, skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. `only_tags` is `None`. Returns `True`. (Correct) - `tags={'manual'}, only=['manual'], skip=None` -> `skip_tags` is `None`. `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. Returns `True`. Wait, no. If `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. `if False: return False` -> doesn't return. Returns `True`. (Correct) - `tags={'other'}, only=['manual'], skip=None` -> `skip_tags` is `None`. `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. Returns `False`. (Correct) - `tags={'manual'}, only=['manual'], skip=['manual']` -> `skip_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `False`. Returns `False`. (Correct) Wait, what if `only_tags` is provided but `tags` is empty? `tags=set(), only=['manual'], skip=None` -> `skip_tags` is `None`. `only_tags` is `['manual']`, `tags.isdisjoint(['manual'])` is `True`. Returns `False`. (Correct) So the revised logic seems sound. Let's check how `only_tags` and `skip_tags` are passed to `_evaluate_tags` in `k8s_handle/templating.py` to make sure they are passed as expected. I'll read `k8s_handle/templating.py` again, but looking for calls to `_evaluate_tags`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn " _evaluate_tags" k8s_handle/templating.py<|"|>}<tool_call|><|tool_response>

Turn 9at 206 s58 tokens out8,664 prompt tokens

Wait, `grep` didn't find any calls? Let me check the whole file or use a better grep.

TOOL CALL · run_command

{
  "command": "grep -rn \"_evaluate_tags\" k8s_handle/templating.py"
}

Result of run_command 216 characters

{
  "status": "ok",
  "stdout": "105:                if not self._evaluate_tags(entry.get(\"tags\"), self._tags, self._tags_skip):\n197:    def _evaluate_tags(tags, only_tags, skip_tags):\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 58 tokens · stopped: STOP

Wait, `grep` didn't find any calls? Let me check the whole file or use a better grep. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "_evaluate_tags" k8s_handle/templating.py<|"|>}<tool_call|><|tool_response>

Turn 10at 210 s61 tokens out8,814 prompt tokens

Okay, it's called at line 105. Let's see the context.

TOOL CALL · read_file

{
  "end_line": 115,
  "filepath": "k8s_handle/templating.py",
  "start_line": 90
}

Result of read_file 1,101 characters

{
  "status": "ok",
  "filepath": "k8s_handle/templating.py",
  "content": "class Renderer:\n    def __init__(self, templates_dir, tags=None, tags_skip=None):\n        self._templates_dir = templates_dir\n        self._tags = tags\n        self._tags_skip = tags_skip\n        self._env = get_env(self._templates_dir)\n\n    def _iterate_entries(self, entries, tags=None):\n        if tags is None:\n            tags = set()\n\n        for entry in entries:\n            entry[\"tags\"] = self._get_template_tags(entry).union(tags)\n\n            if \"group\" not in entry.keys():\n                if not self._evaluate_tags(entry.get(\"tags\"), self._tags, self._tags_skip):\n                    continue\n                yield entry\n\n            for nested_entry in self._iterate_entries(entry.get(\"group\", []), entry.get(\"tags\")):\n                yield nested_entry\n\n    def _preprocess_templates(self, templates):\n        output = []\n        for template in templates:\n            tags = template.get('tags', [])",
  "start_line": 90,
  "end_line": 115,
  "total_lines": 201,
  "is_truncated": false
}

Generated tokens 61 tokens · stopped: STOP

Okay, it's called at line 105. Let's see the context. <channel|><|tool_call>call:read_file{end_line:115,filepath:<|"|>k8s_handle/templating.py<|"|>,start_line:90}<tool_call|><|tool_response>

Turn 11at 220 s166 tokens out9,216 prompt tokens

The call is:
```python
if not self._evaluate_tags(entry.get("tags"), self._tags, self._tags_skip):
    continue
```
Wait, `_evaluate_tags` is a `@staticmethod`. So it should be called as `Renderer._evaluate_tags(...)` or `self._evaluate_tags(...)`. The latter is fine in Python.

Let's check where `Renderer` is instantiated. It's likely in `k8s_handle/__init__.py` or another place where `render` is implemented.

Let's check `k8s_handle/__init__.py`.

TOOL CALL · run_command

{
  "command": "grep -rn \"Renderer(\" k8s_handle/__init__.py"
}

Result of run_command 130 characters

{
  "status": "ok",
  "stdout": "45:    templating.Renderer(\n54:    resources = templating.Renderer(\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 166 tokens · stopped: STOP

The call is: ```python if not self._evaluate_tags(entry.get("tags"), self._tags, self._tags_skip): continue ``` Wait, `_evaluate_tags` is a `@staticmethod`. So it should be called as `Renderer._evaluate_tags(...)` or `self._evaluate_tags(...)`. The latter is fine in Python. Let's check where `Renderer` is instantiated. It's likely in `k8s_handle/__init__.py` or another place where `render` is implemented. Let's check `k8s_handle/__init__.py`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "Renderer(" k8s_handle/__init__.py<|"|>}<tool_call|><|tool_response>

Turn 12at 223 s61 tokens out9,442 prompt tokens

Let's see how `Renderer` is instantiated in `k8s_handle/__init__.py`.

TOOL CALL · read_file

{
  "end_line": 65,
  "filepath": "k8s_handle/__init__.py",
  "start_line": 40
}

Result of read_file 832 characters

{
  "status": "ok",
  "filepath": "k8s_handle/__init__.py",
  "content": "    _handler_apply_delete(args, COMMAND_DESTROY)\n\n\ndef handler_render(args):\n    context = config.load_context_section(args.get('section'))\n    templating.Renderer(\n        settings.TEMPLATES_DIR,\n        args.get('tags'),\n        args.get('skip_tags')\n    ).generate_by_context(context)\n\n\ndef _handler_deploy_destroy(args, command):\n    context = config.load_context_section(args.get('section'))\n    resources = templating.Renderer(\n        settings.TEMPLATES_DIR,\n        args.get('tags'),\n        args.get('skip_tags')\n    ).generate_by_context(context)\n\n    if args.get('dry_run'):\n        return\n\n    _handler_provision(\n        command,\n        resources,",
  "start_line": 40,
  "end_line": 65,
  "total_lines": 256,
  "is_truncated": false
}

Generated tokens 61 tokens · stopped: STOP

Let's see how `Renderer` is instantiated in `k8s_handle/__init__.py`. <channel|><|tool_call>call:read_file{end_line:65,filepath:<|"|>k8s_handle/__init__.py<|"|>,start_line:40}<tool_call|><|tool_response>

Turn 13at 310 s1,711 tokens out9,787 prompt tokens

Okay, they are passing `args.get('tags')` and `args.get('skip_tags')`.
Since `ArgumentParser` is used with `action='append'` for `skip-tags` (I saw this in my first `grep`), `args.skip_tags` will be a list if provided, or `None` if not.

So the `_evaluate_tags` function needs to handle `None` for `only_tags` and `skip_tags`.

Current implementation:
```python
    @staticmethod
    def _evaluate_tags(tags, only_tags, skip_tags):
        if only_tags is None and skip_tags is None:
            return True

        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)
```

If `only_tags` is `None`, `only_tags or tags` becomes `tags`.
And `not tags.isdisjoint(tags)` is `False` if `tags` is empty.
This is exactly what we found.

If we change it to:
```python
    @staticmethod
    def _evaluate_tags(tags, only_tags, skip_tags):
        if skip_tags and not tags.isdisjoint(skip_tags):
            return False
        if only_tags and tags.isdisjoint(only_tags):
            return False
        return True
```
Wait, if `only_tags` is `None`, `if only_tags` is `False`, so it returns `True`. This is correct.
If `skip_tags` is `None`, `if skip_tags` is `False`, so it doesn't return `False`. This is correct.

One detail: `tags` is a `set`. `only_tags` and `skip_tags` are passed from `args` which are lists (due to `action='append'`).
`set.isdisjoint(iterable)` works with lists. So it's fine.

Wait, the original code used `skip_tags or []`. If `skip_tags` is an empty list `[]`, it's falsy.
If `skip_tags` is `None`, it's falsy.
So `if skip_tags:` handles both.

Let's refine the implementation to be as concise as possible, perhaps similar to the original style but fixing the bug.

The bug is specifically in `not tags.isdisjoint(only_tags or tags)`.
If `only_tags` is `None`, this should be `True`.
If `only_tags` is specified, it should be `not tags.isdisjoint(only_tags)`.

So we can use:
` (only_tags is None or not tags.isdisjoint(only_tags)) `

Let's check the whole expression:
`tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))`

Test this expression:
- `tags=set(), only=None, skip=None` -> `True and (True or ...)` -> `True`. (Correct)
- `tags=set(), only=None, skip=['manual']` -> `set().isdisjoint(['manual']) and (True or ...)` -> `True and True` -> `True`. (Correct)
- `tags={'manual'}, only=None, skip=['manual']` -> `{'manual'}.isdisjoint(['manual']) and ...` -> `False and ...` -> `False`. (Correct)
- `tags={'other'}, only=None, skip=['manual']` -> `{'other'}.isdisjoint(['manual']) and (True or ...)` -> `True and True` -> `True`. (Correct)
- `tags={'manual'}, only=['manual'], skip=None` -> `{'manual'}.isdisjoint([]) and (False or not {'manual'}.isdisjoint(['manual']))` -> `True and (False or not False)` -> `True and True` -> `True`. (Correct)
- `tags={'other'}, only=['manual'], skip=None` -> `{'other'}.isdisjoint([]) and (False or not {'other'}.isdisjoint(['manual']))` -> `True and (False or not True)` -> `True and False` -> `False`. (Correct)
- `tags={'manual'}, only=['manual'], skip=['manual']` -> `{'manual'}.isdisjoint(['manual']) and ...` -> `False and ...` -> `False`. (Correct)
- `tags=set(), only=['manual'], skip=None` -> `set().isdisjoint([]) and (False or not set().isdisjoint(['manual']))` -> `True and (False or not True)` -> `True and False` -> `False`. (Correct)

This looks perfect and it's a minimal change.

Let's double check the original code one more time.
```python
    @staticmethod
    def _evaluate_tags(tags, only_tags, skip_tags):
        if only_tags is None and skip_tags is None:
            return True

        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)
```
Yes, the original code failed for `tags=set(), only_tags=None, skip_tags=['manual']` because:
`tags.isdisjoint(['manual'])` is `True`.
`only_tags or tags` is `set()`.
`not tags.isdisjoint(set())` is `not True` which is `False`.
Result `True and False` -> `False`.

So the fix is:
```python
    @staticmethod
    def _evaluate_tags(tags, only_tags, skip_tags):
        if only_tags is None and skip_tags is None:
            return True

        return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))
```

Wait, if `only_tags` is `None` and `skip_tags` is not `None`, we just need to check `skip_tags`.
If `only_tags` is not `None` and `skip_tags` is `None`, we just need to check `only_tags`.

The proposed fix handles all these cases.

Wait, what if `only_tags` is passed as an empty list `[]`?
If `ArgumentParser`'s `action='append'` is used and the argument is not provided, `args.tags` will be `None`.
If the argument is provided but empty? No, `action='append'` means if it's not there, it's `None`. If it's there, it's a list of provided values.
So `only_tags` will be either `None` or a non-empty list `['val1', ...]`.

Wait, if `only_tags` is `[]` (empty list), then `only_tags is None` is `False`, and `not tags.isdisjoint([])` is `not True` which is `False`.
So if `only_tags` is `[]`, everything is skipped. This seems correct for "only tags in this empty set".

Wait, let's verify if `only_tags` could be an empty list.
Usually, `action='append'` without `default=[]` results in `None` if not specified.
Let's check `k8s_handle/__init__.py` again.

TOOL CALL · read_file

{
  "end_line": 135,
  "filepath": "k8s_handle/__init__.py",
  "start_line": 125
}

Result of read_file 876 characters

{
  "status": "ok",
  "filepath": "k8s_handle/__init__.py",
  "content": "subparsers = parser.add_subparsers(dest=\"command\")\nsubparsers.required = True\n\nparser_target_config = argparse.ArgumentParser(add_help=False)\nparser_target_config.add_argument('-s', '--section', required=True, type=str, help='Section to deploy from config file')\nparser_target_config.add_argument('-c', '--config', required=False, help='Config file, default: config.yaml')\nparser_target_config.add_argument('--tags', action='append', required=False,\n                                  help='Only use templates tagged with these values')\nparser_target_config.add_argument('--skip-tags', action='append', required=False,\n                                  help='Only use templates whose tags do not match these values')\n",
  "start_line": 125,
  "end_line": 135,
  "total_lines": 256,
  "is_truncated": false
}

Generated tokens 1,711 tokens · stopped: STOP

Okay, they are passing `args.get('tags')` and `args.get('skip_tags')`. Since `ArgumentParser` is used with `action='append'` for `skip-tags` (I saw this in my first `grep`), `args.skip_tags` will be a list if provided, or `None` if not. So the `_evaluate_tags` function needs to handle `None` for `only_tags` and `skip_tags`. Current implementation: ```python @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if only_tags is None and skip_tags is None: return True return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags) ``` If `only_tags` is `None`, `only_tags or tags` becomes `tags`. And `not tags.isdisjoint(tags)` is `False` if `tags` is empty. This is exactly what we found. If we change it to: ```python @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if skip_tags and not tags.isdisjoint(skip_tags): return False if only_tags and tags.isdisjoint(only_tags): return False return True ``` Wait, if `only_tags` is `None`, `if only_tags` is `False`, so it returns `True`. This is correct. If `skip_tags` is `None`, `if skip_tags` is `False`, so it doesn't return `False`. This is correct. One detail: `tags` is a `set`. `only_tags` and `skip_tags` are passed from `args` which are lists (due to `action='append'`). `set.isdisjoint(iterable)` works with lists. So it's fine. Wait, the original code used `skip_tags or []`. If `skip_tags` is an empty list `[]`, it's falsy. If `skip_tags` is `None`, it's falsy. So `if skip_tags:` handles both. Let's refine the implementation to be as concise as possible, perhaps similar to the original style but fixing the bug. The bug is specifically in `not tags.isdisjoint(only_tags or tags)`. If `only_tags` is `None`, this should be `True`. If `only_tags` is specified, it should be `not tags.isdisjoint(only_tags)`. So we can use: ` (only_tags is None or not tags.isdisjoint(only_tags)) ` Let's check the whole expression: `tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))` Test this expression: - `tags=set(), only=None, skip=None` -> `True and (True or ...)` -> `True`. (Correct) - `tags=set(), only=None, skip=['manual']` -> `set().isdisjoint(['manual']) and (True or ...)` -> `True and True` -> `True`. (Correct) - `tags={'manual'}, only=None, skip=['manual']` -> `{'manual'}.isdisjoint(['manual']) and ...` -> `False and ...` -> `False`. (Correct) - `tags={'other'}, only=None, skip=['manual']` -> `{'other'}.isdisjoint(['manual']) and (True or ...)` -> `True and True` -> `True`. (Correct) - `tags={'manual'}, only=['manual'], skip=None` -> `{'manual'}.isdisjoint([]) and (False or not {'manual'}.isdisjoint(['manual']))` -> `True and (False or not False)` -> `True and True` -> `True`. (Correct) - `tags={'other'}, only=['manual'], skip=None` -> `{'other'}.isdisjoint([]) and (False or not {'other'}.isdisjoint(['manual']))` -> `True and (False or not True)` -> `True and False` -> `False`. (Correct) - `tags={'manual'}, only=['manual'], skip=['manual']` -> `{'manual'}.isdisjoint(['manual']) and ...` -> `False and ...` -> `False`. (Correct) - `tags=set(), only=['manual'], skip=None` -> `set().isdisjoint([]) and (False or not set().isdisjoint(['manual']))` -> `True and (False or not True)` -> `True and False` -> `False`. (Correct) This looks perfect and it's a minimal change. Let's double check the original code one more time. ```python @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if only_tags is None and skip_tags is None: return True return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags) ``` Yes, the original code failed for `tags=set(), only_tags=None, skip_tags=['manual']` because: `tags.isdisjoint(['manual'])` is `True`. `only_tags or tags` is `set()`. `not tags.isdisjoint(set())` is `not True` which is `False`. Result `True and False` -> `False`. So the fix is: ```python @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if only_tags is None and skip_tags is None: return True return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags)) ``` Wait, if `only_tags` is `None` and `skip_tags` is not `None`, we just need to check `skip_tags`. If `only_tags` is not `None` and `skip_tags` is `None`, we just need to check `only_tags`. The proposed fix handles all these cases. Wait, what if `only_tags` is passed as an empty list `[]`? If `ArgumentParser`'s `action='append'` is used and the argument is not provided, `args.tags` will be `None`. If the argument is provided but empty? No, `action='append'` means if it's not there, it's `None`. If it's there, it's a list of provided values. So `only_tags` will be either `None` or a non-empty list `['val1', ...]`. Wait, if `only_tags` is `[]` (empty list), then `only_tags is None` is `False`, and `not tags.isdisjoint([])` is `not True` which is `False`. So if `only_tags` is `[]`, everything is skipped. This seems correct for "only tags in this empty set". Wait, let's verify if `only_tags` could be an empty list. Usually, `action='append'` without `default=[]` results in `None` if not specified. Let's check `k8s_handle/__init__.py` again. <channel|><|tool_call>call:read_file{end_line:135,filepath:<|"|>k8s_handle/__init__.py<|"|>,start_line:125}<tool_call|><|tool_response>

Turn 14at 319 s229 tokens out11,759 prompt tokens

Yes, `action='append'` and `required=False`. The default is `None`.

So `only_tags` will be `None` if not provided, or a list of strings.

Let's prepare the fix.

TOOL CALL · edit_file

{
  "filepath": "k8s_handle/templating.py",
  "new_string": "    @staticmethod\n    def _evaluate_tags(tags, only_tags, skip_tags):\n        if only_tags is None and skip_tags is None:\n            return True\n\n        return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))",
  "old_string": "    @staticmethod\n    def _evaluate_tags(tags, only_tags, skip_tags):\n        if only_tags is None and skip_tags is None:\n            return True\n\n        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)"
}

Result of edit_file 499 characters

{
  "status": "ok",
  "filepath": "k8s_handle/templating.py",
  "occurrences": 1,
  "strategy": "exact",
  "diff": "--- a/k8s_handle/templating.py\n+++ b/k8s_handle/templating.py\n@@ -198,4 +198,4 @@\n         if only_tags is None and skip_tags is None:\n             return True\n \n-        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)\n+        return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))\n",
  "is_truncated": false
}

Generated tokens 229 tokens · stopped: STOP

Yes, `action='append'` and `required=False`. The default is `None`. So `only_tags` will be `None` if not provided, or a list of strings. Let's prepare the fix.<channel|><|tool_call>call:edit_file{filepath:<|"|>k8s_handle/templating.py<|"|>,new_string:<|"|> @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if only_tags is None and skip_tags is None: return True return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))<|"|>,old_string:<|"|> @staticmethod def _evaluate_tags(tags, only_tags, skip_tags): if only_tags is None and skip_tags is None: return True return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)<|"|>}<tool_call|><|tool_response>

Turn 15at 329 s291 tokens out12,181 prompt tokens

Now let's verify with the reproduction script again.

TOOL CALL · run_command

{
  "command": "python3 - <<'PY'\nfrom k8s_handle.templating import Renderer\nprint(f\"tags=set(), only=None, skip=None -> {Renderer._evaluate_tags(set(), None, None)}\")\nprint(f\"tags=set(), only=None, skip={['manual']} -> {Renderer._evaluate_tags(set(), None, ['manual'])}\")\nprint(f\"tags={{'manual'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, None, ['manual'])}\")\nprint(f\"tags={{'other'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'other'}, None, ['manual'])}\")\nprint(f\"tags={{'manual'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'manual'}, ['manual'], None)}\")\nprint(f\"tags={{'other'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'other'}, ['manual'], None)}\")\nprint(f\"tags={{'manual'}}, only={['manual']}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, ['manual'], ['manual'])}\")\nPY\n"
}

Result of run_command 422 characters

{
  "status": "ok",
  "stdout": "tags=set(), only=None, skip=None -> True\ntags=set(), only=None, skip=['manual'] -> True\ntags={'manual'}, only=None, skip=['manual'] -> False\ntags={'other'}, only=None, skip=['manual'] -> True\ntags={'manual'}, only=['manual'], skip=None -> True\ntags={'other'}, only=['manual'], skip=None -> False\ntags={'manual'}, only=['manual'], skip=['manual'] -> False\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 291 tokens · stopped: STOP

Now let's verify with the reproduction script again. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' from k8s_handle.templating import Renderer print(f"tags=set(), only=None, skip=None -> {Renderer._evaluate_tags(set(), None, None)}") print(f"tags=set(), only=None, skip={['manual']} -> {Renderer._evaluate_tags(set(), None, ['manual'])}") print(f"tags={{'manual'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, None, ['manual'])}") print(f"tags={{'other'}}, only=None, skip={['manual']} -> {Renderer._evaluate_tags({'other'}, None, ['manual'])}") print(f"tags={{'manual'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'manual'}, ['manual'], None)}") print(f"tags={{'other'}}, only={['manual']}, skip=None -> {Renderer._evaluate_tags({'other'}, ['manual'], None)}") print(f"tags={{'manual'}}, only={['manual']}, skip={['manual']} -> {Renderer._evaluate_tags({'manual'}, ['manual'], ['manual'])}") PY <|"|>}<tool_call|><|tool_response>

Turn 16at 340 s160 tokens out12,619 prompt tokens

The output now shows:
`tags=set(), only=None, skip=['manual'] -> True`
This was the failing case.

Now let's check if there are any existing tests that cover this.
I saw some in `tests/test_templating.py`. Let's run them.
Wait, I don't see `tests/test_templating.py` in the `Workspace Layout` provided at the start?
Wait, let me check the layout again.
```
./tests
./tox.ini
```
Ah, the `tests/` directory is listed. Let's see what's inside it.

TOOL CALL · run_command

{
  "command": "ls -R tests/"
}

Result of run_command 708 characters

{
  "status": "ok",
  "stdout": "tests/:\n__init__.py\nfixtures\ntemplates_tests\ntest_config.py\ntest_dictionary.py\ntest_templating.py\n\ntests/fixtures:\nconfig.yaml\nconfig_with_env_vars.yaml\nconfig_with_include_and_env_vars.yaml\nconfig_without_k8s.yaml\ndashes_config.yaml\nempty_config.yaml\ninclude.yaml\ninclude_2levels_with_env.yaml\ninclude_with_env.yaml\nincorrect_config.yaml\nincorrect_include.yaml\nincorrect_include2.yaml\n\ntests/templates_tests:\nfilters.yaml.j2\ninnerdir\nmy_file.txt\nmy_file1.txt\ntemplate1.yaml.j2\ntemplate2.yaml.j2\ntemplate3.yaml.j2\ntemplate4.yaml.j2\ntemplate_include_file.yaml.j2\n\ntests/templates_tests/innerdir:\ntemplate1.yaml.j2\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 160 tokens · stopped: STOP

The output now shows: `tags=set(), only=None, skip=['manual'] -> True` This was the failing case. Now let's check if there are any existing tests that cover this. I saw some in `tests/test_templating.py`. Let's run them. Wait, I don't see `tests/test_templating.py` in the `Workspace Layout` provided at the start? Wait, let me check the layout again. ``` ./tests ./tox.ini ``` Ah, the `tests/` directory is listed. Let's see what's inside it. <channel|><|tool_call>call:run_command{command:<|"|>ls -R tests/<|"|>}<tool_call|><|tool_response>

Turn 17at 342 s55 tokens out13,073 prompt tokens

Yes, `tests/test_templating.py` exists. Let's run it.

TOOL CALL · run_command

{
  "command": "pytest tests/test_templating.py -q --tb=short --no-header"
}

Result of run_command 3,657 characters

{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "...F..........                                                           [100%]\n=================================== FAILURES ===================================\n____________________ TestTemplating.test_generate_templates ____________________\ntests/test_templating.py:61: in test_generate_templates\n    self.assertEqual(content, \"test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line\")\nE   AssertionError: 'test: |\\n  {{ hello world }}\\n  new\\n  line\\n  {{ hello world1 }}\\n' != 'test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line'\nE     test: |\nE   +   {{ hello world1 }}\nE   + \nE       {{ hello world }}\nE       new\nE   -   line\nE   ?       -\nE   +   line-   {{ hello world1 }}\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485\n  /opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import MutableMapping\n\n../opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318\n  /opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import Mapping\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n=========================== short test summary info ============================\nFAILED tests/test_templating.py::TestTemplating::test_generate_templates - As...\n1 failed, 13 passed, 2 warnings in 0.27s\n",
  "details": {
    "stdout": "...F..........                                                           [100%]\n=================================== FAILURES ===================================\n____________________ TestTemplating.test_generate_templates ____________________\ntests/test_templating.py:61: in test_generate_templates\n    self.assertEqual(content, \"test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line\")\nE   AssertionError: 'test: |\\n  {{ hello world }}\\n  new\\n  line\\n  {{ hello world1 }}\\n' != 'test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line'\nE     test: |\nE   +   {{ hello world1 }}\nE   + \nE       {{ hello world }}\nE       new\nE   -   line\nE   ?       -\nE   +   line-   {{ hello world1 }}\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485\n  /opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import MutableMapping\n\n../opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318\n  /opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import Mapping\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n=========================== short test summary info ============================\nFAILED tests/test_templating.py::TestTemplating::test_generate_templates - As...\n1 failed, 13 passed, 2 warnings in 0.27s\n",
    "stderr": "",
    "exit_code": 1
  }
}

Generated tokens 55 tokens · stopped: STOP

Yes, `tests/test_templating.py` exists. Let's run it. <channel|><|tool_call>call:run_command{command:<|"|>pytest tests/test_templating.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>

Turn 18at 367 s309 tokens out14,267 prompt tokens

The test `TestTemplating.test_generate_templates` failed with an `AssertionError`.
The expected content and actual content differ in order and content.
This failure seems unrelated to the `_evaluate_tags` method.
Wait, did I break something?
Original code: `return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)`
My new code: `return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))`

The `_evaluate_tags` method is used to filter which templates to render. It doesn't affect the content of the rendered templates.

The failure `test_generate_templates` says:
Expected: `'test: |\n  {{ hello world1 }}\n\n  {{ hello world }}\n  new\n  line'`
Actual: `'test: |\n  {{ hello world }}\n  new\n  line\n  {{ hello world1 }}\n'`

This looks like an ordering issue or a difference in how templates are processed.
Wait, did the environment change? Or was this test already failing?
Let's run the test again and see if it's still failing.

TOOL CALL · run_command

{
  "command": "pytest tests/test_templating.py -q --tb=short --no-header"
}

Result of run_command 3,657 characters

{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "...F..........                                                           [100%]\n=================================== FAILURES ===================================\n____________________ TestTemplating.test_generate_templates ____________________\ntests/test_templating.py:61: in test_generate_templates\n    self.assertEqual(content, \"test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line\")\nE   AssertionError: 'test: |\\n  {{ hello world }}\\n  new\\n  line\\n  {{ hello world1 }}\\n' != 'test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line'\nE     test: |\nE   +   {{ hello world1 }}\nE   + \nE       {{ hello world }}\nE       new\nE   -   line\nE   ?       -\nE   +   line-   {{ hello world1 }}\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485\n  /opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import MutableMapping\n\n../opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318\n  /opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import Mapping\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n=========================== short test summary info ============================\nFAILED tests/test_templating.py::TestTemplating::test_generate_templates - As...\n1 failed, 13 passed, 2 warnings in 0.27s\n",
  "details": {
    "stdout": "...F..........                                                           [100%]\n=================================== FAILURES ===================================\n____________________ TestTemplating.test_generate_templates ____________________\ntests/test_templating.py:61: in test_generate_templates\n    self.assertEqual(content, \"test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line\")\nE   AssertionError: 'test: |\\n  {{ hello world }}\\n  new\\n  line\\n  {{ hello world1 }}\\n' != 'test: |\\n  {{ hello world1 }}\\n\\n  {{ hello world }}\\n  new\\n  line'\nE     test: |\nE   +   {{ hello world1 }}\nE   + \nE       {{ hello world }}\nE       new\nE   -   line\nE   ?       -\nE   +   line-   {{ hello world1 }}\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485\n  /opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import MutableMapping\n\n../opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318\n  /opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import Mapping\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n=========================== short test summary info ============================\nFAILED tests/test_templating.py::TestTemplating::test_generate_templates - As...\n1 failed, 13 passed, 2 warnings in 0.27s\n",
    "stderr": "",
    "exit_code": 1
  }
}

Generated tokens 309 tokens · stopped: STOP

The test `TestTemplating.test_generate_templates` failed with an `AssertionError`. The expected content and actual content differ in order and content. This failure seems unrelated to the `_evaluate_tags` method. Wait, did I break something? Original code: `return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)` My new code: `return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))` The `_evaluate_tags` method is used to filter which templates to render. It doesn't affect the content of the rendered templates. The failure `test_generate_templates` says: Expected: `'test: |\n {{ hello world1 }}\n\n {{ hello world }}\n new\n line'` Actual: `'test: |\n {{ hello world }}\n new\n line\n {{ hello world1 }}\n'` This looks like an ordering issue or a difference in how templates are processed. Wait, did the environment change? Or was this test already failing? Let's run the test again and see if it's still failing. <channel|><|tool_call>call:run_command{command:<|"|>pytest tests/test_templating.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>

Turn 19at 383 s341 tokens out15,715 prompt tokens

Since I haven't touched anything in `test_generate_templates` logic, this failure is likely pre-existing in the repository.

Let's double check the `_evaluate_tags` tests in `tests/test_templating.py` to make sure they still pass.
I saw these lines in the first `grep`:
```
./tests/test_templating.py:109:        self.assertTrue(r._evaluate_tags(tags, only_tags=['tag1'], skip_tags=None))
./tests/test_templating.py:110:        self.assertFalse(r._evaluate_tags(tags, only_tags=['tag4'], skip_tags=None))
./tests/test_templating.py:111:        self.assertFalse(r._evaluate_tags(tags, only_tags=['tag1'], skip_tags=['tag1']))
./tests/test_templating.py:112:        self.assertFalse(r._evaluate_tags(tags, only_tags=None, skip_tags=['tag1']))
./tests/test_templating.py:113:        self.assertTrue(r._evaluate_tags(tags, only_tags=None, skip_tags=['tag4']))
```

I'll run only the tests related to `_evaluate_tags`.

TOOL CALL · run_command

{
  "command": "pytest tests/test_templating.py -k _evaluate_tags -q --tb=short --no-header"
}

Result of run_command 1,005 characters

{
  "status": "ok",
  "stdout": ".                                                                        [100%]\n=============================== warnings summary ===============================\n../opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485\n  /opt/py37/lib/python3.7/site-packages/jinja2/utils.py:485: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import MutableMapping\n\n../opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318\n  /opt/py37/lib/python3.7/site-packages/jinja2/runtime.py:318: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3,and in 3.9 it will stop working\n    from collections import Mapping\n\n-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html\n1 passed, 13 deselected, 2 warnings in 0.15s\n",
  "stderr": "",
  "exit_code": 0
}

Generated tokens 341 tokens · stopped: STOP

Since I haven't touched anything in `test_generate_templates` logic, this failure is likely pre-existing in the repository. Let's double check the `_evaluate_tags` tests in `tests/test_templating.py` to make sure they still pass. I saw these lines in the first `grep`: ``` ./tests/test_templating.py:109: self.assertTrue(r._evaluate_tags(tags, only_tags=['tag1'], skip_tags=None)) ./tests/test_templating.py:110: self.assertFalse(r._evaluate_tags(tags, only_tags=['tag4'], skip_tags=None)) ./tests/test_templating.py:111: self.assertFalse(r._evaluate_tags(tags, only_tags=['tag1'], skip_tags=['tag1'])) ./tests/test_templating.py:112: self.assertFalse(r._evaluate_tags(tags, only_tags=None, skip_tags=['tag1'])) ./tests/test_templating.py:113: self.assertTrue(r._evaluate_tags(tags, only_tags=None, skip_tags=['tag4'])) ``` I'll run only the tests related to `_evaluate_tags`. <channel|><|tool_call>call:run_command{command:<|"|>pytest tests/test_templating.py -k _evaluate_tags -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>

Turn 20at 445 s71 tokens out5,680 prompt tokens

The `_evaluate_tags` tests pass. The other failure in `tests/test_templating.py` is likely unrelated and pre-existing.

Now I'll check for any other untracked files or modifications.

TOOL CALL · run_command

{
  "command": "git status --short && git diff"
}

Result of run_command 685 characters

{
  "status": "ok",
  "stdout": " M k8s_handle/templating.py\ndiff --git a/k8s_handle/templating.py b/k8s_handle/templating.py\nindex 7f2d6b7..f64c0a1 100644\n--- a/k8s_handle/templating.py\n+++ b/k8s_handle/templating.py\n@@ -198,4 +198,4 @@ class Renderer:\n         if only_tags is None and skip_tags is None:\n             return True\n \n-        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)\n+        return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))\n",
  "stderr": "",
  "exit_code": 0,
  "budget_warning": "Only 10 tool call(s) remaining (20/30 used). Finalize your edits and call submit_patch soon."
}

Generated tokens 71 tokens · stopped: STOP

The `_evaluate_tags` tests pass. The other failure in `tests/test_templating.py` is likely unrelated and pre-existing. Now I'll check for any other untracked files or modifications. <channel|><|tool_call>call:run_command{command:<|"|>git status --short && git diff<|"|>}<tool_call|><|tool_response>

Patch, tests and logs

Final code change Included

diff --git a/k8s_handle/templating.py b/k8s_handle/templating.py
index 7f2d6b7..f64c0a1 100644
--- a/k8s_handle/templating.py
+++ b/k8s_handle/templating.py
@@ -198,4 +198,4 @@ class Renderer:
         if only_tags is None and skip_tags is None:
             return True
 
-        return tags.isdisjoint(skip_tags or []) and not tags.isdisjoint(only_tags or tags)
+        return tags.isdisjoint(skip_tags or []) and (only_tags is None or not tags.isdisjoint(only_tags))

Test output Included

============================= test session starts ==============================
collected 121 items

k8s_handle/k8s/test_adapters.py ...................                      [ 15%]
k8s_handle/k8s/test_deprecation_checker.py ........                      [ 22%]
k8s_handle/k8s/test_provisioner.py ..................................... [ 52%]
........                                                                 [ 59%]
k8s_handle/k8s/availability_checker/test_availability_checker.py ....    [ 62%]
k8s_handle/k8s/availability_checker/test_resource_getters.py ....        [ 66%]
tests/test_config.py ..........................                          [ 87%]
tests/test_dictionary.py .                                               [ 88%]
tests/test_templating.py ...F..........                                  [100%]

=================================== FAILURES ===================================
/testbed/tests/test_templating.py:61: AssertionError: 'test: |\n  {{ hello world }}\n  new\n  line\n  {{ hello world1 }}\n' != 'test: |\n  {{ hello world1 }}\n\n  {{ hello world }}\n  new\n  line'
==================================== PASSES ====================================
_________________ TestAdapterBuiltInKind.test_app_create_fail __________________
------------------------------ Captured log call -------------------------------
ERROR    k8s_handle.k8s.adapters:adapters.py:138 Exception when calling "create_namespaced_deployment": None
ERROR    k8s_handle.k8s.adapters:adapters.py:138 Exception when calling "create_namespaced_storage_class": None
_________________ TestAdapterBuiltInKind.test_app_delete_fail __________________
------------------------------ Captured log call -------------------------------
ERROR    k8s_handle.k8s.adapters:adapters.py:188 Exception when calling "delete_namespaced_deployment": None
ERROR    k8s_handle.k8s.adapters:adapters.py:188 Exception when calling "delete_namespaced_storage_class": None
___________________ TestAdapterBuiltInKind.test_app_get_fail ___________________
------------------------------ Captured log call -------------------------------
ERROR    k8s_handle.k8s.adapters:adapters.py:89 Exception when calling "read_namespaced_deployment": None
ERROR    k8s_handle.k8s.adapters:adapters.py:89 Exception when calling "read_namespaced_storage_class": None
_________________ TestAdapterBuiltInKind.test_app_replace_fail _________________
------------------------------ Captured log call -------------------------------
ERROR    k8s_handle.k8s.adapters:adapters.py:173 Exception when calling "replace_namespaced_deployment": None
ERROR    k8s_handle.k8s.adapters:adapters.py:173 Exception when calling "replace_namespaced_storage_class": None
_____________ TestApiDeprecationChecker.test_version_is_deprecated _____________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.deprecation_checker:deprecation_checker.py:147 
        ▄▄
       ████
      ██▀▀██
     ███  ███     Version test/v1
    ████▄▄████    for resource type Deployment
   █████  █████   is deprecated since 1.8.0
  ██████████████
__________ TestApiDeprecationChecker.test_version_is_deprecated_equal __________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.deprecation_checker:deprecation_checker.py:147 
        ▄▄
       ████
      ██▀▀██
     ███  ███     Version test/v1
    ████▄▄████    for resource type Deployment
   █████  █████   is deprecated since 1.8.0
  ██████████████
____________ TestApiDeprecationChecker.test_version_is_unsupported _____________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.deprecation_checker:deprecation_checker.py:132 
        ▄▄
       ████
      ██▀▀██
     ███  ███     Version test/v1
    ████▄▄████    for resource type Deployment
   █████  █████   is unsupported since 1.10.0
  ██████████████
_________ TestApiDeprecationChecker.test_version_is_unsupported_equal __________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.deprecation_checker:deprecation_checker.py:132 
        ▄▄
       ████
      ██▀▀██
     ███  ███     Version test/v1
    ████▄▄████    for resource type Deployment
   █████  █████   is unsupported since 1.10.0
  ██████████████
_______________ TestApiDeprecationChecker.test_version_no_until ________________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.deprecation_checker:deprecation_checker.py:147 
        ▄▄
       ████
      ██▀▀██
     ███  ███     Version test/v1
    ████▄▄████    for resource type Deployment
   █████  █████   is deprecated since 1.8.0
  ██████████████
__________________ TestProvisioner.test_get_apply_ports_case2 __________________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.provisioner:provisioner.py:108 Port 55 will be deleted
__________________ TestProvisioner.test_get_apply_ports_case3 __________________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.provisioner:provisioner.py:108 Port 55 will be deleted
__________________ TestProvisioner.test_get_apply_ports_case4 __________________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.provisioner:provisioner.py:108 Port 55 will be deleted
__________________ TestProvisioner.test_get_apply_ports_case8 __________________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.k8s.provisioner:provisioner.py:108 Port 55 will be deleted
________________ TestProvisioner.test_pvc_replace_new_attribute ________________
------------------------------ Captured log call -------------------------------
ERROR    k8s_handle.k8s.provisioner:provisioner.py:165 {'requests': {'storage': '2Gi'}} != {'requests': {'storage': '1Gi'}}
ERROR    k8s_handle.k8s.adapters:adapters.py:173 Exception when calling "replace_namespaced_persistent_volume_claim": None
_________________ TestProvisioner.test_pvc_replace_not_equals __________________
------------------------------ Captured log call -------------------------------
ERROR    k8s_handle.k8s.provisioner:provisioner.py:165 {'requests': {'storage': '2Gi'}} != {'requests': {'storage': '1Gi'}}
ERROR    k8s_handle.k8s.adapters:adapters.py:173 Exception when calling "replace_namespaced_persistent_volume_claim": None
_________________ TestTemplating.test_generate_group_templates _________________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.templating:templating.py:122 Exception during preprocess {'group': [{'group': [{'template': 'template2.yaml.j2'}]}, {'template': 'template3.yaml.j2'}]}, first argument must be string or compiled pattern, passing it as is
_________________ TestTemplating.test_no_templates_in_kubectl __________________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.templating:templating.py:122 Exception during preprocess {'namespace': 'io'}, first argument must be string or compiled pattern, passing it as is
_______________ TestTemplating.test_templates_regex_parse_failed _______________
------------------------------ Captured log call -------------------------------
WARNING  k8s_handle.templating:templating.py:122 Exception during preprocess {'template': '['}, unterminated character set at position 0, passing it as is
- generated xml file: /tmp/rebench-grade-a8c79f02e3d84e9d9334a268d09f65c8.xml --
=========================== short test summary info ============================
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_create
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_create_fail
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_delete
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_delete_fail
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_delete_not_found
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_get
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_get_fail
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_get_not_found
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_replace
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_replace_fail
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_app_replace_service
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterBuiltInKind::test_get_app_kind
PASSED k8s_handle/k8s/test_adapters.py::TestAdapter::test_get_instance_builtin
PASSED k8s_handle/k8s/test_adapters.py::TestAdapter::test_get_instance_custom
PASSED k8s_handle/k8s/test_adapters.py::TestAdapter::test_get_instance_negative
PASSED k8s_handle/k8s/test_adapters.py::TestAdapter::test_get_instance_test
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterCustomKind::test_initialization_api_version_invalid
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterCustomKind::test_initialization_kind_missing
PASSED k8s_handle/k8s/test_adapters.py::TestAdapterCustomKind::test_initialization_positive
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_kind_not_in_list
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_version_is_deprecated
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_version_is_deprecated_equal
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_version_is_unsupported
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_version_is_unsupported_equal
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_version_no_until
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_version_not_deprecated_yet
PASSED k8s_handle/k8s/test_deprecation_checker.py::TestApiDeprecationChecker::test_version_not_in_list
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_daemonset_wait_complete
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_daemonset_wait_complete_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_deploy_create
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_deploy_replace
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_deploy_unknown_api
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_deployment_destruction_wait_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_deployment_destruction_wait_success
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_deployment_wait_complete
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_deployment_wait_complete_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_destroy_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_destroy_not_found
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_destroy_success
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_destroy_unknown_api
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case1
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case2
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case3
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case4
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case5
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case6
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case7
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_apply_ports_case8
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_get_template_contexts
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_job_destruction_wait_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_job_destruction_wait_success
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_job_wait_complete
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_job_wait_complete_conditions_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_job_wait_complete_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_missing_annotation_strict
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_missing_annotations_and_labels
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_missing_labels_strict
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_missing_ports_strict
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_no_annotations_in_service_metadata
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_no_annotations_in_template
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_no_missing_annotations_and_labels
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_ns_from_config
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_ns_from_template
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_pvc_replace_equals
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_pvc_replace_new_attribute
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_pvc_replace_not_equals
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_service_replace
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_service_replace_no_ports
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_statefulset_wait_complete
PASSED k8s_handle/k8s/test_provisioner.py::TestProvisioner::test_statefulset_wait_complete_fail
PASSED k8s_handle/k8s/test_provisioner.py::TestKubeObject::test_replicas_equal
PASSED k8s_handle/k8s/test_provisioner.py::TestKubeObject::test_replicas_not_equal
PASSED k8s_handle/k8s/availability_checker/test_availability_checker.py::TestAvailabilityChecker::test_is_available_kind
PASSED k8s_handle/k8s/availability_checker/test_availability_checker.py::TestAvailabilityChecker::test_run_with_invalid_version
PASSED k8s_handle/k8s/availability_checker/test_availability_checker.py::TestAvailabilityChecker::test_run_with_unsupported_version
PASSED k8s_handle/k8s/availability_checker/test_availability_checker.py::TestAvailabilityChecker::test_run_with_valid_version
PASSED k8s_handle/k8s/availability_checker/test_resource_getters.py::TestCoreResourceGetter::test_get_resources_by_version
PASSED k8s_handle/k8s/availability_checker/test_resource_getters.py::TestCoreResourceGetter::test_is_processable_version
PASSED k8s_handle/k8s/availability_checker/test_resource_getters.py::TestRegularResourceGetter::test_get_resources_by_version
PASSED k8s_handle/k8s/availability_checker/test_resource_getters.py::TestRegularResourceGetter::test_is_processable_version
PASSED tests/test_config.py::TestContextGeneration::test_check_empty_var
PASSED tests/test_config.py::TestContextGeneration::test_common_section
PASSED tests/test_config.py::TestContextGeneration::test_concatination_with_env
PASSED tests/test_config.py::TestContextGeneration::test_config_incorrect
PASSED tests/test_config.py::TestContextGeneration::test_config_is_empty
PASSED tests/test_config.py::TestContextGeneration::test_config_not_exist
PASSED tests/test_config.py::TestContextGeneration::test_context_update_recursion
PASSED tests/test_config.py::TestContextGeneration::test_context_update_section
PASSED tests/test_config.py::TestContextGeneration::test_dashes_in_var_names
PASSED tests/test_config.py::TestContextGeneration::test_empty_section
PASSED tests/test_config.py::TestContextGeneration::test_env_var_in_include_2_levels_dont_set
PASSED tests/test_config.py::TestContextGeneration::test_env_var_in_include_dont_set
PASSED tests/test_config.py::TestContextGeneration::test_env_var_in_section1_dont_set
PASSED tests/test_config.py::TestContextGeneration::test_env_var_in_section2_dont_set
PASSED tests/test_config.py::TestContextGeneration::test_infinite_recursion_loop
PASSED tests/test_config.py::TestContextGeneration::test_merge_section_options
PASSED tests/test_config.py::TestContextGeneration::test_no_templates
PASSED tests/test_config.py::TestContextGeneration::test_not_existed_section
PASSED tests/test_config.py::TestContextGeneration::test_recursive_vars
PASSED tests/test_config.py::TestPriorityEvaluation::test_environment_deprecated
PASSED tests/test_config.py::TestPriorityEvaluation::test_first_none_argument
PASSED tests/test_config.py::TestPriorityEvaluation::test_first_priority
PASSED tests/test_config.py::TestPriorityEvaluation::test_k8s_client_configuration_missing_token
PASSED tests/test_config.py::TestPriorityEvaluation::test_k8s_client_configuration_missing_uri
PASSED tests/test_config.py::TestPriorityEvaluation::test_k8s_client_configuration_success
PASSED tests/test_config.py::TestPriorityEvaluation::test_k8s_namespace_default
PASSED tests/test_dictionary.py::TestDictionaryMerge::test_dictionary_merge
PASSED tests/test_templating.py::TestTemplating::test_evaluate_tags
PASSED tests/test_templating.py::TestTemplating::test_filters
PASSED tests/test_templating.py::TestTemplating::test_generate_group_templates
PASSED tests/test_templating.py::TestTemplating::test_generate_templates_with_kubectl_section
PASSED tests/test_templating.py::TestTemplating::test_get_template_tags
PASSED tests/test_templating.py::TestTemplating::test_get_template_tags_unexpected_type
PASSED tests/test_templating.py::TestTemplating::test_io_2709
PASSED tests/test_templating.py::TestTemplating::test_no_templates_in_kubectl
PASSED tests/test_templating.py::TestTemplating::test_none_context
PASSED tests/test_templating.py::TestTemplating::test_render_not_existent_template
PASSED tests/test_templating.py::TestTemplating::test_renderer_init
PASSED tests/test_templating.py::TestTemplating::test_templates_regex
PASSED tests/test_templating.py::TestTemplating::test_templates_regex_parse_failed
FAILED tests/test_templating.py::TestTemplating::test_generate_templates - As...
======================== 1 failed, 120 passed in 0.36s =========================

Test errors Included

Test report (JUnit) Included

<?xml version="1.0" encoding="utf-8"?><testsuites><testsuite errors="0" failures="1" hostname="01704973f1d8" name="pytest" skipped="0" tests="121" time="0.363" timestamp="2026-11-14T04:15:20.280909"><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_create" time="0.001" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_create_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_delete" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_delete_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_delete_not_found" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_get" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_get_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_get_not_found" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_replace" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_replace_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_app_replace_service" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterBuiltInKind" name="test_get_app_kind" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapter" name="test_get_instance_builtin" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapter" name="test_get_instance_custom" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapter" name="test_get_instance_negative" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapter" name="test_get_instance_test" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterCustomKind" name="test_initialization_api_version_invalid" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterCustomKind" name="test_initialization_kind_missing" time="0.000" /><testcase classname="k8s_handle.k8s.test_adapters.TestAdapterCustomKind" name="test_initialization_positive" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_kind_not_in_list" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_version_is_deprecated" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_version_is_deprecated_equal" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_version_is_unsupported" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_version_is_unsupported_equal" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_version_no_until" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_version_not_deprecated_yet" time="0.000" /><testcase classname="k8s_handle.k8s.test_deprecation_checker.TestApiDeprecationChecker" name="test_version_not_in_list" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_daemonset_wait_complete" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_daemonset_wait_complete_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_deploy_create" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_deploy_replace" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_deploy_unknown_api" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_deployment_destruction_wait_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_deployment_destruction_wait_success" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_deployment_wait_complete" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_deployment_wait_complete_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_destroy_fail" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_destroy_not_found" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_destroy_success" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_destroy_unknown_api" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case1" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case2" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case3" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case4" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case5" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case6" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case7" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_apply_ports_case8" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_get_template_contexts" time="0.002" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_job_destruction_wait_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_job_destruction_wait_success" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_job_wait_complete" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_job_wait_complete_conditions_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_job_wait_complete_fail" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_missing_annotation_strict" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_missing_annotations_and_labels" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_missing_labels_strict" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_missing_ports_strict" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_no_annotations_in_service_metadata" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_no_annotations_in_template" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_no_missing_annotations_and_labels" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_ns_from_config" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_ns_from_template" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_pvc_replace_equals" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_pvc_replace_new_attribute" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_pvc_replace_not_equals" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_service_replace" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_service_replace_no_ports" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_statefulset_wait_complete" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestProvisioner" name="test_statefulset_wait_complete_fail" time="0.001" /><testcase classname="k8s_handle.k8s.test_provisioner.TestKubeObject" name="test_replicas_equal" time="0.000" /><testcase classname="k8s_handle.k8s.test_provisioner.TestKubeObject" name="test_replicas_not_equal" time="0.000" /><testcase classname="k8s_handle.k8s.availability_checker.test_availability_checker.TestAvailabilityChecker" name="test_is_available_kind" time="0.000" /><testcase classname="k8s_handle.k8s.availability_checker.test_availability_checker.TestAvailabilityChecker" name="test_run_with_invalid_version" time="0.001" /><testcase classname="k8s_handle.k8s.availability_checker.test_availability_checker.TestAvailabilityChecker" name="test_run_with_unsupported_version" time="0.000" /><testcase classname="k8s_handle.k8s.availability_checker.test_availability_checker.TestAvailabilityChecker" name="test_run_with_valid_version" time="0.001" /><testcase classname="k8s_handle.k8s.availability_checker.test_resource_getters.TestCoreResourceGetter" name="test_get_resources_by_version" time="0.000" /><testcase classname="k8s_handle.k8s.availability_checker.test_resource_getters.TestCoreResourceGetter" name="test_is_processable_version" time="0.000" /><testcase classname="k8s_handle.k8s.availability_checker.test_resource_getters.TestRegularResourceGetter" name="test_get_resources_by_version" time="0.000" /><testcase classname="k8s_handle.k8s.availability_checker.test_resource_getters.TestRegularResourceGetter" name="test_is_processable_version" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_check_empty_var" time="0.006" /><testcase classname="tests.test_config.TestContextGeneration" name="test_common_section" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_concatination_with_env" time="0.005" /><testcase classname="tests.test_config.TestContextGeneration" name="test_config_incorrect" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_config_is_empty" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_config_not_exist" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_context_update_recursion" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_context_update_section" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_dashes_in_var_names" time="0.001" /><testcase classname="tests.test_config.TestContextGeneration" name="test_empty_section" time="0.000" /><testcase classname="tests.test_config.TestContextGeneration" name="test_env_var_in_include_2_levels_dont_set" time="0.001" /><testcase classname="tests.test_config.TestContextGeneration" name="test_env_var_in_include_dont_set" time="0.001" /><testcase classname="tests.test_config.TestContextGeneration" name="test_env_var_in_section1_dont_set" time="0.001" /><testcase classname="tests.test_config.TestContextGeneration" name="test_env_var_in_section2_dont_set" time="0.001" /><testcase classname="tests.test_config.TestContextGeneration" name="test_infinite_recursion_loop" time="0.001" /><testcase classname="tests.test_config.TestContextGeneration" name="test_merge_section_options" time="0.005" /><testcase classname="tests.test_config.TestContextGeneration" name="test_no_templates" time="0.005" /><testcase classname="tests.test_config.TestContextGeneration" name="test_not_existed_section" time="0.005" /><testcase classname="tests.test_config.TestContextGeneration" name="test_recursive_vars" time="0.005" /><testcase classname="tests.test_config.TestPriorityEvaluation" name="test_environment_deprecated" time="0.000" /><testcase classname="tests.test_config.TestPriorityEvaluation" name="test_first_none_argument" time="0.000" /><testcase classname="tests.test_config.TestPriorityEvaluation" name="test_first_priority" time="0.000" /><testcase classname="tests.test_config.TestPriorityEvaluation" name="test_k8s_client_configuration_missing_token" time="0.000" /><testcase classname="tests.test_config.TestPriorityEvaluation" name="test_k8s_client_configuration_missing_uri" time="0.000" /><testcase classname="tests.test_config.TestPriorityEvaluation" name="test_k8s_client_configuration_success" time="0.000" /><testcase classname="tests.test_config.TestPriorityEvaluation" name="test_k8s_namespace_default" time="0.000" /><testcase classname="tests.test_dictionary.TestDictionaryMerge" name="test_dictionary_merge" time="0.000" /><testcase classname="tests.test_templating.TestTemplating" name="test_evaluate_tags" time="0.000" /><testcase classname="tests.test_templating.TestTemplating" name="test_filters" time="0.008" /><testcase classname="tests.test_templating.TestTemplating" name="test_generate_group_templates" time="0.007" /><testcase classname="tests.test_templating.TestTemplating" name="test_generate_templates" time="0.008"><failure message="AssertionError: 'test: |\n  {{ hello world }}\n  new\n  line\n  {{ hello world1 }}\n' != 'test: |\n  {{ hello world1 }}\n\n  {{ hello world }}\n  new\n  line'&#10;  test: |&#10;+   {{ hello world1 }}&#10;+ &#10;    {{ hello world }}&#10;    new&#10;-   line&#10;?       -&#10;+   line-   {{ hello world1 }}">E   AssertionError: 'test: |\n  {{ hello world }}\n  new\n  line\n  {{ hello world1 }}\n' != 'test: |\n  {{ hello world1 }}\n\n  {{ hello world }}\n  new\n  line'
      test: |
    +   {{ hello world1 }}
    + 
        {{ hello world }}
        new
    -   line
    ?       -
    +   line-   {{ hello world1 }}</failure></testcase><testcase classname="tests.test_templating.TestTemplating" name="test_generate_templates_with_kubectl_section" time="0.007" /><testcase classname="tests.test_templating.TestTemplating" name="test_get_template_tags" time="0.000" /><testcase classname="tests.test_templating.TestTemplating" name="test_get_template_tags_unexpected_type" time="0.000" /><testcase classname="tests.test_templating.TestTemplating" name="test_io_2709" time="0.007" /><testcase classname="tests.test_templating.TestTemplating" name="test_no_templates_in_kubectl" time="0.005" /><testcase classname="tests.test_templating.TestTemplating" name="test_none_context" time="0.000" /><testcase classname="tests.test_templating.TestTemplating" name="test_render_not_existent_template" time="0.006" /><testcase classname="tests.test_templating.TestTemplating" name="test_renderer_init" time="0.000" /><testcase classname="tests.test_templating.TestTemplating" name="test_templates_regex" time="0.006" /><testcase classname="tests.test_templating.TestTemplating" name="test_templates_regex_parse_failed" time="0.006" /></testsuite></testsuites>

Agent log Included

  [   0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
  [   0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository 2gis/k8s-handle.
  [  24.7s] 💭 (941 chars) "The user is reporting that `--skip-tags` does not work in `k8s-handle render`.
Looking at the reproduction steps:
1. A c..."
  [  24.7s] 🔧 run_command grep -rn --include="*.py" "skip-tags" .
  [  24.7s]   → ./k8s_handle/__init__.py:133:parser_target_config.add_argument('--skip-tags', action='append', 
required=False,
  [  31.2s] 💭 (132 chars) "Okay, `--skip-tags` is defined in `k8s_handle/__init__.py`. Let's see how it's used.
I'll search for where `args.skip_ta..."
  [  31.2s] 🔧 run_command grep -rn --include="*.py" "skip_tags" .
  [  31.3s]   → ./k8s_handle/templating.py:197:    def _evaluate_tags(tags, only_tags, skip_tags):
  [  39.5s] 💭 (257 chars) "It seems `k8s_handle/templating.py` has an `_evaluate_tags` method.
Let's examine `k8s_handle/templating.py` around line..."
  [  39.5s] 📖 read_file (k8s_handle/templating.py)
  [  39.6s]   ✓ {'status': 'ok', 'filepath': 'k8s_handle/templating.py', 'content': '\n    @staticmethod\n    def 
_get_template_tags(tem…
  [  96.4s] 💭 (1763 chars) "Wait, let's look at `_evaluate_tags` again:
```python
    @staticmethod
    def _evaluate_tags(tags, only_tags, skip_tag..."
  [  96.4s] 🔧 run_command (10 lines) python3 - <<'PY'
  [  96.6s]   → error (exit 0): 
  [ 106.4s] 💭 (219 chars) "Ah, I should check if it's a class or just functions. Let me check 
`k8s_handle/templating.py` again.
Wait, I saw `@stati..."
  [ 106.4s] 📖 read_file (k8s_handle/templating.py)
  [ 106.4s]   ✓ {'status': 'ok', 'filepath': 'k8s_handle/templating.py', 'content': 'import base64\nimport glob\nimport 
itertools\nimpor…
  [ 118.6s] 💭 (84 chars) "The class is named `Renderer`. My mistake.

Let's try the reproduction script again."
  [ 118.6s] 🔧 run_command (10 lines) python3 - <<'PY'
  [ 118.8s]   → tags=set(), only=None, skip=None -> True
  [ 144.3s] 💭 (569 chars) "Wait, the output for `tags=set(), only=None, skip=['manual']` is `False`.
This confirms my suspicion: if a template has ..."
  [ 144.3s] 🔧 run_command (10 lines) python3 - <<'PY'
  [ 144.5s]   → tags=set(), only=None, skip=None -> True
  [ 202.2s] 💭 (3105 chars) "Yes, `tags=set(), only=None, skip=['manual'] -> False`.
This is definitely wrong. If no tags are specified for a templat..."
  [ 202.2s] 🔧 run_command grep -rn " _evaluate_tags" k8s_handle/templating.py
  [ 202.2s]   → 197:    def _evaluate_tags(tags, only_tags, skip_tags):
  [ 205.8s] 💭 (85 chars) "Wait, `grep` didn't find any calls? Let me check the whole file or use a better grep."
  [ 205.8s] 🔧 run_command grep -rn "_evaluate_tags" k8s_handle/templating.py
  [ 205.9s]   → 105:                if not self._evaluate_tags(entry.get("tags"), self._tags, self._tags_skip):
  [ 209.2s] 💭 (53 chars) "Okay, it's called at line 105. Let's see the context."
  [ 209.2s] 📖 read_file (k8s_handle/templating.py)
  [ 209.2s]   ✓ {'status': 'ok', 'filepath': 'k8s_handle/templating.py', 'content': 'class Renderer:\n    def 
__init__(self, templates_d…
  [ 219.9s] 💭 (452 chars) "The call is:
```python
if not self._evaluate_tags(entry.get("tags"), self._tags, self._tags_skip):
    continue
```
Wait..."
  [ 219.9s] 🔧 run_command grep -rn "Renderer(" k8s_handle/__init__.py
  [ 219.9s]   → 45:    templating.Renderer(
  [ 222.2s] 💭 (69 chars) "Let's see how `Renderer` is instantiated in `k8s_handle/__init__.py`."
  [ 222.2s] 📖 read_file (k8s_handle/__init__.py)
  [ 222.2s]   ✓ {'status': 'ok', 'filepath': 'k8s_handle/__init__.py', 'content': "    _handler_apply_delete(args, 
COMMAND_DESTROY)\n\n\…
  [ 309.7s] 💭 (5342 chars) "Okay, they are passing `args.get('tags')` and `args.get('skip_tags')`.
Since `ArgumentParser` is used with `action='appe..."
  [ 309.7s] 📖 read_file (k8s_handle/__init__.py)
  [ 309.8s]   ✓ {'status': 'ok', 'filepath': 'k8s_handle/__init__.py', 'content': 'subparsers = 
parser.add_subparsers(dest="command")\ns…
  [ 318.7s] 💭 (161 chars) "Yes, `action='append'` and `required=False`. The default is `None`.

So `only_tags` will be `None` if not provided, or a..."
  [ 318.7s] ✏️ edit_file (k8s_handle/templating.py)
  [ 318.9s]   ✓ {'status': 'ok', 'filepath': 'k8s_handle/templating.py', 'occurrences': 1, 'strategy': 'exact', 'diff': 
'--- a/k8s_handl…
  [ 328.7s] 💭 (52 chars) "Now let's verify with the reproduction script again."
  [ 328.7s] 🔧 run_command (10 lines) python3 - <<'PY'
  [ 328.9s]   → tags=set(), only=None, skip=None -> True
  [ 339.5s] 💭 (444 chars) "The output now shows:
`tags=set(), only=None, skip=['manual'] -> True`
This was the failing case.

Now let's check if th..."
  [ 339.5s] 🔧 run_command ls -R tests/
  [ 339.5s]   → tests/:
  [ 342.0s] 💭 (53 chars) "Yes, `tests/test_templating.py` exists. Let's run it."
  [ 342.0s] 🔧 run_command pytest tests/test_templating.py -q --tb=short --no-header
  [ 342.5s]   → error (exit 0): 
  [ 366.4s] 💭 (999 chars) "The test `TestTemplating.test_generate_templates` failed with an `AssertionError`.
The expected content and actual conte..."
  [ 366.4s] 🔧 run_command pytest tests/test_templating.py -q --tb=short --no-header
  [ 366.8s]   → error (exit 0): 
  [ 382.2s] 💭 (913 chars) "Since I haven't touched anything in `test_generate_templates` logic, this failure is likely 
pre-existing in the reposito..."
  [ 382.2s] 🔧 run_command pytest tests/test_templating.py -k _evaluate_tags -q --tb=short --no-header
  [ 382.6s]   → .                                                                        [100%]
  [ 444.4s] 💭 (182 chars) "The `_evaluate_tags` tests pass. The other failure in `tests/test_templating.py` is likely 
unrelated and pre-existing.

..."
  [ 444.4s] 🔧 run_command git status --short && git diff
  [ 444.5s]   →  M k8s_handle/templating.py

Native result row

{
  "agent_error": "Agent exceeded session timeout (7.5 min)",
  "duration_seconds": 453.7,
  "error": "Test failures/errors recorded in JUnit XML (failures=1, errors=0)",
  "grade": {
    "collected_tests": 121,
    "competition_junit_ok": false,
    "error": "Test failures/errors recorded in JUnit XML (failures=1, errors=0)",
    "required_issues_count": 1,
    "resolved": false,
    "status_counts": {
      "FAILED": 1,
      "PASSED": 120
    },
    "strict_clean_patch": true,
    "test_exit_code": 1
  },
  "instance_id": "2gis__k8s-handle-120",
  "pass_idx": 0,
  "patch_chars": 472,
  "phase1_seconds": 452.64,
  "repo": "2gis/k8s-handle",
  "request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/2gis__k8s-handle-120__p0__r3.jsonl",
  "resolved": false,
  "rollout_idx": 3,
  "run_key": "2gis__k8s-handle-120__p0__r3",
  "strict_clean_patch": true,
  "tool_calls": 20,
  "total_llm_calls": 20,
  "trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_2gis__k8s-handle-120__p0__r3.json"
}