GEMMA DEVELOPER AGENT
SAVED EVIDENCE
← 31B real rollouts · 480 (exact stack, 32 lanes, 13-Nov)
ROLLOUT 7 · gammapy/gammapy

gammapy__gammapy-5674

Not solved
489 stotal time
22tool calls
22model calls
5,286tokens generated
196,047prompt tokens read

Empty agent patch

Turn by turn

Token shading: p ≥ 0.9 0.5 – 0.9 0.2 – 0.5 below 0.2. Hover a token for its id and probability.

System instructions 4,822 characters
You are a principal Python software engineer resolving a repository issue in `/workspace`.
Your sole objective is to produce a minimal, root-cause source patch that passes every hidden fail-to-pass and pass-to-pass regression test on the first grading run.

## Critical Environment & Grader Rules
1. **Air-Gapped Sandbox & Available CLI Tools**: No network access. Never run `pip`, `uv`, `conda`, or `git fetch`. Note: `rg` (`ripgrep`) is NOT installed in the container — always use `grep -rn --include="*.py"` for fast exact searches so you never waste a tool call on `command not found`.
2. **Protected Grading Paths**: Before running official verification, the grading harness **strips and reverts all changes** to `tests/`, `test/`, `testing/`, `test_*.py`, `*_test.py`, `conftest.py`, `pyproject.toml`, `setup.cfg`, `pytest.ini`, and `tox.ini`. Every part of your fix MUST reside in non-test production source files.
3. **Untracked File Trap (`git add -N .`)**: `submit_patch` stages ALL untracked files inside `/workspace`! Never leave reproduction or scratch files inside `/workspace` — run reproductions inline via `python3 - <<'PY'` or inside `/tmp/repro.py` in a single `run_command`.
4. **Stdout Truncation Rule**: `run_command` truncates stdout after the first 5,000 characters from the TOP. Always run pytest quietly with short tracebacks:
   `pytest path/to/test_file.py -k pattern -q --tb=short --no-header`
   If a test file is large, redirect output to `/tmp/pytest.log` and inspect `tail -n 80 /tmp/pytest.log` so failure tracebacks at the bottom are never cut off.
5. **Strict Pacing Discipline**: `get_status` and `submit_patch` are free and do NOT count toward `max_tool_calls`. Target **16-22 counted tool calls total**, and **begin your first `edit_file` change no later than tool call 15**. Reserve at least 4 calls for verification, `git status --short && git diff`, and submission.

## Execution Protocol

### Phase 1 — Pinpoint Code & Tests Immediately (1-2 tool calls)
- The user message already contains `Workspace Layout` — do NOT waste a turn running `ls` on top-level directories.
- Run a single compound `run_command` with `grep -rn --include="*.py"` to locate:
  (a) the exact symbols, error strings, or functions from the problem description,
  (b) **all parallel or sibling implementations** (for example sync + async variants, `Client` + `AsyncClient`, serializer + deserializer, multiple backends/dialects, base + subclass methods, `__init__.py` / `__all__` exports), and
  (c) the closest existing unit test files under `tests/`.

### Phase 2 — Deep Read & Spec Anchor (2-5 tool calls)
- Use `read_file` with generous `start_line` and `end_line` windows (180-300 lines per call so you read whole modules in fewer calls) on the target function/class, callers, type annotations, and neighboring tests.
- Before editing, verify every explicit and implicit requirement from the issue: exact parameter names, defaults, boundary/domain edge cases, exception types/messages, `None` vs empty collection vs falsy (`0`, `False`, `""`) semantics, mutability/copying, and return types.

### Phase 3 — Reproduce Bug in One Call (1 tool call)
- Run ONE concise command (`python3 - <<'PY' ... PY` or targeted `pytest ... -q --tb=short --no-header`) via `run_command` to observe the exact pre-fix failure. Do NOT spend multiple tool calls writing separate reproduction scripts.

### Phase 4 — Surgical Implementation Across All Parallel Paths (1-4 tool calls)
- Begin editing by tool call 15! Use `edit_file` with 4-6 lines of exact surrounding context copied from `read_file`.
- Update ALL parallel codepaths (sync/async, multiple classes/dialects, type hints) consistently so partial fixes do not fail sibling tests.
- **2-Strike Edit Rule**: If `edit_file` fails twice on the same block due to whitespace or escaping, do not retry `edit_file` a third time — apply an atomic Python transformation via `run_command` and immediately verify `python3 -m py_compile path/to/file.py`.

### Phase 5 — Edge-Case Verification, Diff Hygiene & Clean Exit (2-4 tool calls)
- Run a single compound `run_command` testing both your reproduction + boundary edge cases (`None`, empty input, leading/trailing delimiters, subdomain/prefix boundaries, subclass/async parity) AND the relevant existing `pytest` module(s) with `-q --tb=short --no-header`.
- Run `git status --short && git diff` via `run_command`. Confirm:
  - ZERO untracked (`??`) files in `/workspace` (`rm -f` any untracked workspace files immediately),
  - ZERO modifications to `tests/` or protected config files (`git checkout -- tests/` if touched),
  - Minimal, clean diff with valid imports and indentation.
- Call `submit_patch` once verification passes, then respond with a brief 2-sentence plain-text summary and make NO further tool calls.
Task prompt 9,192 characters
You are evaluating a software engineering task for repository gammapy/gammapy.

Problem Statement:
FluxPoints.resample_axis fails in 1.3
**Gammapy version**
1.3, dev



**Bug description**
FluxPoints.resample_axis raises an error




**To Reproduce**
In the `analysis_2.py` tutorial, add at the end
```
from gammapy.estimators.utils import get_rebinned_axis
ax_new = get_rebinned_axis(fluxpoint=flux_points, method="min-ts", ts_threshold=10)
flux_points.resample_axis(ax_new)
```

This fails with an error:

```
---------------------------------------------------------------------------
ValueError                                Traceback (most recent call last)
Cell In[40], line 1
----> 1 flux_points.resample_axis(ax_new)

File ~/Gammapy-dev/gammapy/gammapy/estimators/points/core.py:869, in FluxPoints.resample_axis(self, axis_new)
    867         edge_max = edge_max + axis_new.reference_time
    868     fp = self.slice_by_coord({axis_new.name: slice(edge_min, edge_max)})
--> 869     fp_new = squash_fluxpoints(fp, axis_new)
    870     fluxpoints.append(fp_new)
    872 return self.__class__.from_stack(fluxpoints, axis=axis_new)

File ~/Gammapy-dev/gammapy/gammapy/estimators/points/core.py:55, in squash_fluxpoints(flux_point, axis)
     52 if axis.name != "energy":
     53     geom = geom.to_cube([flux_point.geom.axes["energy"]])
---> 55 maps["norm"] = Map.from_geom(geom, data=minimizer.x)
     56 maps["norm_err"] = Map.from_geom(
     57     geom, data=np.sqrt(minimizer.hess_inv.todense()).reshape(geom.data_shape)
     58 )
     59 maps["n_dof"] = Map.from_geom(geom, data=flux_point.geom.axes[axis.name].nbin)

File ~/Gammapy-dev/gammapy/gammapy/maps/core.py:304, in Map.from_geom(geom, meta, data, unit, dtype)
    301     raise ValueError("Unrecognized geom type.")
    303 cls_out = Map._get_map_cls(map_type)
--> 304 return cls_out(geom, data=data, meta=meta, unit=unit, dtype=dtype)

File ~/Gammapy-dev/gammapy/gammapy/maps/region/ndmap.py:56, in RegionNDMap.__init__(self, geom, data, dtype, meta, unit)
     53     meta = {}
     55 self._geom = geom
---> 56 self.data = data
     57 self.meta = meta
     58 self._unit = u.Unit(unit)

File ~/Gammapy-dev/gammapy/gammapy/maps/region/ndmap.py:84, in RegionNDMap.data(self, value)
     81         value = np.expand_dims(value, (-2, -1))
     83 if self.geom.data_shape != value.shape:
---> 84     raise ValueError(
     85         f"Input shape {input_shape} is not compatible with shape from geometry {self.geom.data_shape}"
     86     )
     88 self._data = value

ValueError: Input shape (1,) is not compatible with shape from geometry (1, 1)
```




## Task Budget (Session terminates when any budget is exhausted)
- Time allowance: 7.5 minutes
- Tool calls allowance: 30 calls
- Max loop iterations: 40 turns

## Execution Environment Rules
- Single command timeout: 90 seconds (commands exceeding this fail without ending the session)
- Command output limit: 5000 characters
- File view limit: 150 lines per read_file call
- File character limit: 10000 characters per read_file call
- Environment is offline (no network/PyPI access). All repository and test dependencies are ALREADY pre-installed. Do NOT attempt to run pip install or download packages.

## Instructions:
0. All source code is under `/workspace`. Do NOT search outside `/workspace` (e.g. `/usr/`, `/wheels/`, system site-packages). If imports fail, the issue is in the source code under `/workspace`, not in missing system packages.
1. Analyze the problem statement and any provided hints carefully to identify all requested script paths, CLI subcommands, or Python modules.
2. Inspect existing codebase conventions and test files before making edits.
3. Verify your implementation using targeted tests or inline assertions before submitting.
4. Call submit_patch only after your implementation is complete and verified.
5. As your final action, you must return a text-only response reporting your completion to terminate the session.
## Workspace Layout
The repository is located at `/workspace`. Here is the directory tree (up to 3 levels):
```
./CITATION
./CITATION.cff
./CODE_OF_CONDUCT.md
./CONTRIBUTING.md
./LICENSE.rst
./LONG_DESCRIPTION.rst
./MANIFEST.in
./Makefile
./README.rst
./codemeta.json
./dev
./dev/README.rst
./dev/authors.py
./dev/codemeta.py
./dev/codespell
./dev/codespell/exclude-file.txt
./dev/codespell/ignore-words.txt
./dev/github_summary.py
./dev/ipynb_to_gallery.py
./dev/prepare-release.py
./docs
./environment-dev.yml
./examples
./gammapy
./gammapy/__init__.py
./gammapy/__main__.py
./gammapy/_astropy_init.py
./gammapy/analysis
./gammapy/analysis/__init__.py
./gammapy/analysis/config
./gammapy/analysis/config.py
./gammapy/analysis/core.py
./gammapy/analysis/tests
./gammapy/astro
./gammapy/astro/__init__.py
./gammapy/astro/darkmatter
./gammapy/astro/population
./gammapy/astro/source
./gammapy/catalog
./gammapy/catalog/__init__.py
./gammapy/catalog/core.py
./gammapy/catalog/fermi.py
./gammapy/catalog/gammacat.py
./gammapy/catalog/hawc.py
./gammapy/catalog/hess.py
./gammapy/catalog/lhaaso.py
./gammapy/catalog/tests
./gammapy/conftest.py
./gammapy/data
./gammapy/data/__init__.py
./gammapy/data/data_store.py
./gammapy/data/event_list.py
./gammapy/data/filters.py
./gammapy/data/gti.py
./gammapy/data/hdu_index_table.py
./gammapy/data/ivoa.py
./gammapy/data/metadata.py
./gammapy/data/obs_table.py
./gammapy/data/observations.py
./gammapy/data/pointing.py
./gammapy/data/simulate.py
./gammapy/data/tests
./gammapy/data/utils.py
./gammapy/datasets
./gammapy/datasets/__init__.py
./gammapy/datasets/actors.py
./gammapy/datasets/core.py
./gammapy/datasets/evaluator.py
./gammapy/datasets/flux_points.py
./gammapy/datasets/io.py
./gammapy/datasets/map.py
./gammapy/datasets/metadata.py
./gammapy/datasets/simulate.py
./gammapy/datasets/spectrum.py
./gammapy/datasets/tests
./gammapy/datasets/utils.py
./gammapy/estimators
./gammapy/estimators/__init__.py
./gammapy/estimators/core.py
./gammapy/estimators/energydependentmorphology.py
./gammapy/estimators/flux.py
./gammapy/estimators/map
./gammapy/estimators/metadata.py
./gammapy/estimators/parameter.py
./gammapy/estimators/points
./gammapy/estimators/profile.py
./gammapy/estimators/tests
./gammapy/estimators/utils.py
./gammapy/extern
./gammapy/extern/__init__.py
./gammapy/extern/xmltodict.py
./gammapy/irf
./gammapy/irf/__init__.py
./gammapy/irf/background.py
./gammapy/irf/core.py
./gammapy/irf/edisp
./gammapy/irf/effective_area.py
./gammapy/irf/io.py
./gammapy/irf/psf
./gammapy/irf/rad_max.py
./gammapy/irf/tests
./gammapy/makers
./gammapy/makers/__init__.py
./gammapy/makers/background
./gammapy/makers/core.py
./gammapy/makers/map.py
./gammapy/makers/reduce.py
./gammapy/makers/safe.py
./gammapy/makers/spectrum.py
./gammapy/makers/tests
./gammapy/makers/utils.py
./gammapy/maps
./gammapy/maps/__init__.py
./gammapy/maps/axes.py
./gammapy/maps/coord.py
./gammapy/maps/core.py
./gammapy/maps/geom.py
./gammapy/maps/hpx
./gammapy/maps/io.py
./gammapy/maps/maps.py
./gammapy/maps/measure.py
./gammapy/maps/region
./gammapy/maps/tests
./gammapy/maps/utils.py
./gammapy/maps/wcs
./gammapy/modeling
./gammapy/modeling/__init__.py
./gammapy/modeling/covariance.py
./gammapy/modeling/fit.py
./gammapy/modeling/iminuit.py
./gammapy/modeling/likelihood.py
./gammapy/modeling/models
./gammapy/modeling/parameter.py
./gammapy/modeling/scipy.py
./gammapy/modeling/selection.py
./gammapy/modeling/sherpa.py
./gammapy/modeling/tests
./gammapy/modeling/utils.py
./gammapy/scripts
./gammapy/scripts/__init__.py
./gammapy/scripts/analysis.py
./gammapy/scripts/check.py
./gammapy/scripts/download.py
./gammapy/scripts/info.py
./gammapy/scripts/main.py
./gammapy/scripts/tests
./gammapy/scripts/workflow.py
./gammapy/stats
./gammapy/stats/__init__.py
./gammapy/stats/counts_statistic.py
./gammapy/stats/fit_statistics.py
./gammapy/stats/fit_statistics_cython.pyx
./gammapy/stats/tests
./gammapy/stats/utils.py
./gammapy/stats/variability.py
./gammapy/tests
./gammapy/tests/__init__.py
./gammapy/utils
./gammapy/utils/__init__.py
./gammapy/utils/array.py
./gammapy/utils/check.py
./gammapy/utils/cluster.py
./gammapy/utils/compat.py
./gammapy/utils/coordinates
./gammapy/utils/deprecation.py
./gammapy/utils/docs.py
./gammapy/utils/fits.py
./gammapy/utils/gauss.py
./gammapy/utils/integrate.py
./gammapy/utils/interpolation.py
./gammapy/utils/metadata.py
./gammapy/utils/observers.py
./gammapy/utils/parallel.py
./gammapy/utils/pbar.py
./gammapy/utils/random
./gammapy/utils/regions.py
./gammapy/utils/registry.py
./gammapy/utils/roots.py
./gammapy/utils/scripts.py
./gammapy/utils/table.py
./gammapy/utils/testing.py
./gammapy/utils/tests
./gammapy/utils/time.py
./gammapy/utils/types.py
./gammapy/utils/units.py
./gammapy/visualization
./gammapy/visualization/__init__.py
./gammapy/visualization/cmap.py
./gammapy/visualization/datasets.py
./gammapy/visualization/heatmap.py
./gammapy/visualization/panel.py
./gammapy/visualization/tests
./gammapy/visualization/utils.py
./gammapy/workflow
./gammapy/workflow/__init__.py
./gammapy/workflow/config
./pyproject.toml
./setup.cfg
./setup.py
./tox.ini
```
Turn 1at 60 s240 tokens out5,369 prompt tokens
The user is reporting a `ValueError` in `FluxPoints.resample_axis` in Gammapy 1.3.
The error happens at:
`gammapy/estimators/points/core.py:55, in squash_fluxpoints(flux_point, axis)`
`maps["norm"] = Map.from_geom(geom, data=minimizer.x)`

The trace shows:
`ValueError: Input shape (1,) is not compatible with shape from geometry (1, 1)`

This suggests that `minimizer.x` has shape `(1,)`, but `geom.data_shape` is `(1, 1)`.

Let's examine the code in `gammapy/estimators/points/core.py` around `squash_fluxpoints` and `FluxPoints.resample_axis`.

First, I will locate the files and functions.
TOOL CALL · run_command
{
  "command": "grep -rn --include=\"*.py\" \"squash_fluxpoints\" gammapy/estimators/points/core.py"
}
Result of run_command 163 characters
{
  "status": "ok",
  "stdout": "31:def squash_fluxpoints(flux_point, axis):\n869:            fp_new = squash_fluxpoints(fp, axis_new)\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 240 tokens · stopped: STOP
<|channel>thought The user is reporting a `ValueError` in `FluxPoints.resample_axis` in Gammapy 1.3. The error happens at: `gammapy/estimators/points/core.py:55, in squash_fluxpoints(flux_point, axis)` `maps["norm"] = Map.from_geom(geom, data=minimizer.x)` The trace shows: `ValueError: Input shape (1,) is not compatible with shape from geometry (1, 1)` This suggests that `minimizer.x` has shape `(1,)`, but `geom.data_shape` is `(1, 1)`. Let's examine the code in `gammapy/estimators/points/core.py` around `squash_fluxpoints` and `FluxPoints.resample_axis`. First, I will locate the files and functions.<channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "squash_fluxpoints" gammapy/estimators/points/core.py<|"|>}<tool_call|><|tool_response>
Turn 2at 69 s103 tokens out5,685 prompt tokens
Okay, `squash_fluxpoints` is defined at line 31 and called at line 869 in `gammapy/estimators/points/core.py`.

Let's read the implementation of `squash_fluxpoints` and `FluxPoints.resample_axis`.
TOOL CALL · read_file
{
  "end_line": 70,
  "filepath": "gammapy/estimators/points/core.py",
  "start_line": 30
}
Result of read_file 1,864 characters
{
  "status": "ok",
  "filepath": "gammapy/estimators/points/core.py",
  "content": "\ndef squash_fluxpoints(flux_point, axis):\n    \"\"\"Squash a `~FluxPoints` object into one point.\n\n    The log-likelihoods profiles in each bin are summed\n    to compute the resultant quantities. Stat profiles\n    must be present on the `~FluxPoints` object for\n    this method to work.\n    \"\"\"\n    value_scan = flux_point.stat_scan.geom.axes[\"norm\"].center\n    stat_scan = np.sum(flux_point.stat_scan.data, axis=0).ravel()\n    f = interp1d(value_scan, stat_scan, kind=\"quadratic\", bounds_error=False)\n    f = interpolate_profile(value_scan, stat_scan)\n    minimizer = minimize(\n        f,\n        x0=value_scan[int(len(value_scan) / 2)],\n        bounds=[(value_scan[0], value_scan[-1])],\n        method=\"L-BFGS-B\",\n    )\n\n    maps = Maps()\n    geom = flux_point.geom.to_image()\n    if axis.name != \"energy\":\n        geom = geom.to_cube([flux_point.geom.axes[\"energy\"]])\n\n    maps[\"norm\"] = Map.from_geom(geom, data=minimizer.x)\n    maps[\"norm_err\"] = Map.from_geom(\n        geom, data=np.sqrt(minimizer.hess_inv.todense()).reshape(geom.data_shape)\n    )\n    maps[\"n_dof\"] = Map.from_geom(geom, data=flux_point.geom.axes[axis.name].nbin)\n\n    if \"norm_ul\" in flux_point.available_quantities:\n        delta_ts = flux_point.meta.get(\"n_sigma_ul\", 2) ** 2\n        ul = stat_profile_ul_scipy(value_scan, stat_scan, delta_ts=delta_ts)\n        maps[\"norm_ul\"] = Map.from_geom(geom, data=ul.value)\n\n    maps[\"stat\"] = Map.from_geom(geom, data=f(minimizer.x))\n\n    geom_scan = geom.to_cube([MapAxis.from_nodes(value_scan, name=\"norm\")])\n    maps[\"stat_scan\"] = Map.from_geom(\n        geom=geom_scan, data=stat_scan.reshape(geom_scan.data_shape)",
  "start_line": 30,
  "end_line": 70,
  "total_lines": 872,
  "is_truncated": false
}
Generated tokens 103 tokens · stopped: STOP
Okay, `squash_fluxpoints` is defined at line 31 and called at line 869 in `gammapy/estimators/points/core.py`. Let's read the implementation of `squash_fluxpoints` and `FluxPoints.resample_axis`.<channel|><|tool_call>call:read_file{end_line:70,filepath:<|"|>gammapy/estimators/points/core.py<|"|>,start_line:30}<tool_call|><|tool_response>
Turn 3at 87 s263 tokens out6,470 prompt tokens
The `minimizer.x` is the result of `scipy.optimize.minimize`. For a scalar objective function, `minimizer.x` is a numpy array of shape `(1,)`.
The `geom` is converted to an image, and if `axis.name != "energy"`, it's converted to a cube.
`Map.from_geom(geom, data=minimizer.x)` fails because `geom.data_shape` is `(1, 1)` (or something else not matching `(1,)`), but `minimizer.x` is `(1,)`.

Wait, if `geom` is an image (which it is after `to_image()`), `geom.data_shape` would be something like `(nx, ny)`.
Wait, if `flux_point` is a `FluxPoints` object, `flux_point.geom` should be the geometry of the flux points.

Let's look at `FluxPoints.resample_axis` as well.
TOOL CALL · read_file
{
  "end_line": 872,
  "filepath": "gammapy/estimators/points/core.py",
  "start_line": 840
}
Result of read_file 1,519 characters
{
  "status": "ok",
  "filepath": "gammapy/estimators/points/core.py",
  "content": "    def resample_axis(self, axis_new):\n        \"\"\"Rebin the flux point object along the new axis.\n\n        The log-likelihoods profiles in each bin are summed\n        to compute the resultant quantities.\n        Stat profiles must be present on the `~gammapy.estimators.FluxPoints` object for\n        this method to work.\n\n        For now, works only for flat `~gammapy.estimators.FluxPoints`.\n\n        Parameters\n        ----------\n        axis_new : `MapAxis` or `TimeMapAxis`\n            The new axis to resample along\n\n        Returns\n        -------\n        flux_points : `~gammapy.estimators.FluxPoints`\n            A new FluxPoints object with modified axis.\n        \"\"\"\n        if not self.has_stat_profiles:\n            raise ValueError(\"Stat profiles not present, rebinning is not possible\")\n\n        fluxpoints = []\n        for edge_min, edge_max in zip(axis_new.edges_min, axis_new.edges_max):\n            if isinstance(axis_new, TimeMapAxis):\n                edge_min = edge_min + axis_new.reference_time\n                edge_max = edge_max + axis_new.reference_time\n            fp = self.slice_by_coord({axis_new.name: slice(edge_min, edge_max)})\n            fp_new = squash_fluxpoints(fp, axis_new)\n            fluxpoints.append(fp_new)\n\n        return self.__class__.from_stack(fluxpoints, axis=axis_new)",
  "start_line": 840,
  "end_line": 872,
  "total_lines": 872,
  "is_truncated": false
}
Generated tokens 263 tokens · stopped: STOP
The `minimizer.x` is the result of `scipy.optimize.minimize`. For a scalar objective function, `minimizer.x` is a numpy array of shape `(1,)`. The `geom` is converted to an image, and if `axis.name != "energy"`, it's converted to a cube. `Map.from_geom(geom, data=minimizer.x)` fails because `geom.data_shape` is `(1, 1)` (or something else not matching `(1,)`), but `minimizer.x` is `(1,)`. Wait, if `geom` is an image (which it is after `to_image()`), `geom.data_shape` would be something like `(nx, ny)`. Wait, if `flux_point` is a `FluxPoints` object, `flux_point.geom` should be the geometry of the flux points. Let's look at `FluxPoints.resample_axis` as well. <channel|><|tool_call>call:read_file{end_line:872,filepath:<|"|>gammapy/estimators/points/core.py<|"|>,start_line:840}<tool_call|><|tool_response>
Turn 4at 126 s576 tokens out7,195 prompt tokens
In `resample_axis`, it iterates over the bins of `axis_new`.
For each bin, it slices the `FluxPoints` object: `fp = self.slice_by_coord({axis_new.name: slice(edge_min, edge_max)})`.
Then it calls `squash_fluxpoints(fp, axis_new)`.

In `squash_fluxpoints(flux_point, axis)`:
`geom = flux_point.geom.to_image()`
If `axis.name != "energy"`, `geom = geom.to_cube([flux_point.geom.axes["energy"]])`.

The error is: `ValueError: Input shape (1,) is not compatible with shape from geometry (1, 1)`.
This means `geom.data_shape` is `(1, 1)`, but `minimizer.x` is `(1,)`.

Wait, `minimizer.x` is a 1D array. `Map.from_geom` seems to expect data that matches `geom.data_shape`.

If `geom.data_shape` is `(1, 1)`, it means it's a 2D geometry (e.g. an image with 1x1 pixel).

Let's see why `minimizer.x` is not reshaped.
In `squash_fluxpoints`:
```python
    maps["norm"] = Map.from_geom(geom, data=minimizer.x)
    maps["norm_err"] = Map.from_geom(
        geom, data=np.sqrt(minimizer.hess_inv.todense()).reshape(geom.data_shape)
    )
```
`norm_err` is explicitly reshaped to `geom.data_shape`. But `norm` is not.

If `minimizer.x` is `(1,)` and `geom.data_shape` is `(1, 1)`, we need to reshape `minimizer.x` to `geom.data_shape`.

Wait, `minimizer.x` is always a 1D array from `scipy.optimize.minimize`. For a single point, it's shape `(1,)`.
And `geom` for a single `flux_point` (after slicing and squashing) should typically represent one location.

Let's check `Map.from_geom` in `gammapy/maps/core.py`.
TOOL CALL · read_file
{
  "end_line": 310,
  "filepath": "gammapy/maps/core.py",
  "start_line": 290
}
Result of read_file 880 characters
{
  "status": "ok",
  "filepath": "gammapy/maps/core.py",
  "content": "        from .hpx import HpxGeom\n        from .region import RegionGeom\n        from .wcs import WcsGeom\n\n        if isinstance(geom, HpxGeom):\n            map_type = \"hpx\"\n        elif isinstance(geom, WcsGeom):\n            map_type = \"wcs\"\n        elif isinstance(geom, RegionGeom):\n            map_type = \"region\"\n        else:\n            raise ValueError(\"Unrecognized geom type.\")\n\n        cls_out = Map._get_map_cls(map_type)\n        return cls_out(geom, data=data, meta=meta, unit=unit, dtype=dtype)\n\n    @staticmethod\n    def from_hdulist(\n        hdulist, hdu=None, hdu_bands=None, map_type=\"auto\", format=None, colname=None\n    ):\n        \"\"\"Create from a `astropy.io.fits.HDUList` object.",
  "start_line": 290,
  "end_line": 310,
  "total_lines": 2109,
  "is_truncated": false
}
Generated tokens 576 tokens · stopped: STOP
In `resample_axis`, it iterates over the bins of `axis_new`. For each bin, it slices the `FluxPoints` object: `fp = self.slice_by_coord({axis_new.name: slice(edge_min, edge_max)})`. Then it calls `squash_fluxpoints(fp, axis_new)`. In `squash_fluxpoints(flux_point, axis)`: `geom = flux_point.geom.to_image()` If `axis.name != "energy"`, `geom = geom.to_cube([flux_point.geom.axes["energy"]])`. The error is: `ValueError: Input shape (1,) is not compatible with shape from geometry (1, 1)`. This means `geom.data_shape` is `(1, 1)`, but `minimizer.x` is `(1,)`. Wait, `minimizer.x` is a 1D array. `Map.from_geom` seems to expect data that matches `geom.data_shape`. If `geom.data_shape` is `(1, 1)`, it means it's a 2D geometry (e.g. an image with 1x1 pixel). Let's see why `minimizer.x` is not reshaped. In `squash_fluxpoints`: ```python maps["norm"] = Map.from_geom(geom, data=minimizer.x) maps["norm_err"] = Map.from_geom( geom, data=np.sqrt(minimizer.hess_inv.todense()).reshape(geom.data_shape) ) ``` `norm_err` is explicitly reshaped to `geom.data_shape`. But `norm` is not. If `minimizer.x` is `(1,)` and `geom.data_shape` is `(1, 1)`, we need to reshape `minimizer.x` to `geom.data_shape`. Wait, `minimizer.x` is always a 1D array from `scipy.optimize.minimize`. For a single point, it's shape `(1,)`. And `geom` for a single `flux_point` (after slicing and squashing) should typically represent one location. Let's check `Map.from_geom` in `gammapy/maps/core.py`. <channel|><|tool_call>call:read_file{end_line:310,filepath:<|"|>gammapy/maps/core.py<|"|>,start_line:290}<tool_call|><|tool_response>
Turn 5at 130 s62 tokens out8,083 prompt tokens
And `RegionNDMap` (which is likely used here since it was in the traceback):
TOOL CALL · read_file
{
  "end_line": 100,
  "filepath": "gammapy/maps/region/ndmap.py",
  "start_line": 70
}
Result of read_file 1,362 characters
{
  "status": "ok",
  "filepath": "gammapy/maps/region/ndmap.py",
  "content": "            Data array.\n        \"\"\"\n        if np.isscalar(value):\n            value = value * np.ones(self.geom.data_shape, dtype=type(value))\n\n        if isinstance(value, u.Quantity):\n            raise TypeError(\"Map data must be a Numpy array. Set unit separately\")\n\n        input_shape = value.shape\n        if len(self.geom.data_shape) == 2 + len(value.shape):\n            if self.geom.data_shape[: len(value.shape)] == value.shape:\n                value = np.expand_dims(value, (-2, -1))\n\n        if self.geom.data_shape != value.shape:\n            raise ValueError(\n                f\"Input shape {input_shape} is not compatible with shape from geometry {self.geom.data_shape}\"\n            )\n\n        self._data = value\n\n    def plot(self, ax=None, axis_name=None, **kwargs):\n        \"\"\"Plot the data contained in region map along the non-spatial axis.\n\n        Parameters\n        ----------\n        ax : `~matplotlib.pyplot.Axis`, optional\n            Axis used for plotting.\n            Default is None.\n        axis_name : str, optional\n            Which axis to plot on the x-axis. Extra axes will be plotted as\n            additional lines. Default is None.",
  "start_line": 70,
  "end_line": 100,
  "total_lines": 837,
  "is_truncated": false
}
Generated tokens 62 tokens · stopped: STOP
And `RegionNDMap` (which is likely used here since it was in the traceback): <channel|><|tool_call>call:read_file{end_line:100,filepath:<|"|>gammapy/maps/region/ndmap.py<|"|>,start_line:70}<tool_call|><|tool_response>
Turn 6at 172 s701 tokens out8,552 prompt tokens
In `RegionNDMap.data` (the setter):
```python
        if np.isscalar(value):
            value = value * np.ones(self.geom.data_shape, dtype=type(value))

        if isinstance(value, u.Quantity):
            raise TypeError(\"Map data must be a Numpy array. Set unit separately\")

        input_shape = value.shape
        if len(self.geom.data_shape) == 2 + len(value.shape):
            if self.geom.data_shape[: len(value.shape)] == value.shape:
                value = np.expand_dims(value, (-2, -1))

        if self.geom.data_shape != value.shape:
            raise ValueError(
                f\"Input shape {input_shape} is not compatible with shape from geometry {self.geom.data_shape}\"
            )
```
`minimizer.x` is not a scalar, it's a numpy array of shape `(1,)`. So `np.isscalar(value)` is False.
`value.shape` is `(1,)`. `len(value.shape)` is 1.
`geom.data_shape` is `(1, 1)`. `len(geom.data_shape)` is 2.
The condition `len(self.geom.data_shape) == 2 + len(value.shape)` would be `2 == 2 + 1` which is False.
Then it checks `self.geom.data_shape != value.shape`, which is `(1, 1) != (1,)`, which is True, so it raises `ValueError`.

The issue is that `minimizer.x` is passed as-is, but it needs to match the geometry shape.
Since `minimizer.x` always has shape `(1,)` for the result of `minimize` on a single value, we should probably reshape it or ensure it's a scalar if the geom.data_shape is (1,1).

Actually, the best way is to reshape it to `geom.data_shape` just like it's done for `norm_err`.

Let's verify this with a reproduction script.
I need to create a minimal example that reproduces this. I'll look at the problem statement for hints.
The problem says:
```python
from gammapy.estimators.utils import get_rebinned_axis
ax_new = get_rebinned_axis(fluxpoint=flux_points, method="min-ts", ts_threshold=10)
flux_points.resample_axis(ax_new)
```
I don't have `flux_points` here. I need to create one.
`FluxPoints` is in `gammapy.estimators.points.core.FluxPoints`.

Let's try to create a `FluxPoints` object with stat profiles.
I'll search for `FluxPoints` tests to see how they are created.
TOOL CALL · run_command
{
  "command": "grep -rn --include=\"*.py\" \"TestFluxPoints\" gammapy/estimators/tests/"
}
Result of run_command 127 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "",
  "details": {
    "stdout": "",
    "stderr": "",
    "exit_code": 1
  }
}
Generated tokens 701 tokens · stopped: STOP
In `RegionNDMap.data` (the setter): ```python if np.isscalar(value): value = value * np.ones(self.geom.data_shape, dtype=type(value)) if isinstance(value, u.Quantity): raise TypeError(\"Map data must be a Numpy array. Set unit separately\") input_shape = value.shape if len(self.geom.data_shape) == 2 + len(value.shape): if self.geom.data_shape[: len(value.shape)] == value.shape: value = np.expand_dims(value, (-2, -1)) if self.geom.data_shape != value.shape: raise ValueError( f\"Input shape {input_shape} is not compatible with shape from geometry {self.geom.data_shape}\" ) ``` `minimizer.x` is not a scalar, it's a numpy array of shape `(1,)`. So `np.isscalar(value)` is False. `value.shape` is `(1,)`. `len(value.shape)` is 1. `geom.data_shape` is `(1, 1)`. `len(geom.data_shape)` is 2. The condition `len(self.geom.data_shape) == 2 + len(value.shape)` would be `2 == 2 + 1` which is False. Then it checks `self.geom.data_shape != value.shape`, which is `(1, 1) != (1,)`, which is True, so it raises `ValueError`. The issue is that `minimizer.x` is passed as-is, but it needs to match the geometry shape. Since `minimizer.x` always has shape `(1,)` for the result of `minimize` on a single value, we should probably reshape it or ensure it's a scalar if the geom.data_shape is (1,1). Actually, the best way is to reshape it to `geom.data_shape` just like it's done for `norm_err`. Let's verify this with a reproduction script. I need to create a minimal example that reproduces this. I'll look at the problem statement for hints. The problem says: ```python from gammapy.estimators.utils import get_rebinned_axis ax_new = get_rebinned_axis(fluxpoint=flux_points, method="min-ts", ts_threshold=10) flux_points.resample_axis(ax_new) ``` I don't have `flux_points` here. I need to create one. `FluxPoints` is in `gammapy.estimators.points.core.FluxPoints`. Let's try to create a `FluxPoints` object with stat profiles. I'll search for `FluxPoints` tests to see how they are created. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn --include="*.py" "TestFluxPoints" gammapy/estimators/tests/<|"|>}<tool_call|><|tool_response>
Turn 7at 177 s90 tokens out9,308 prompt tokens
Ah, maybe they are in `gammapy/estimators/points/tests`? No, `gammapy/estimators/tests` is a directory but maybe the files are named differently.

Wait, I see `gammapy/estimators/tests` in the layout. Let me list the files there.
TOOL CALL · run_command
{
  "command": "ls gammapy/estimators/tests/"
}
Result of run_command 215 characters
{
  "status": "ok",
  "stdout": "__init__.py\ntest_core.py\ntest_energydependentmorphology.py\ntest_flux.py\ntest_metadata.py\ntest_parameter_estimator.py\ntest_profile.py\ntest_utils.py\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 90 tokens · stopped: STOP
Ah, maybe they are in `gammapy/estimators/points/tests`? No, `gammapy/estimators/tests` is a directory but maybe the files are named differently. Wait, I see `gammapy/estimators/tests` in the layout. Let me list the files there. <channel|><|tool_call>call:run_command{command:<|"|>ls gammapy/estimators/tests/<|"|>}<tool_call|><|tool_response>
Turn 8at 179 s48 tokens out9,495 prompt tokens
Let's check `test_core.py`.
TOOL CALL · run_command
{
  "command": "grep -rn \"TestFluxPoints\" gammapy/estimators/tests/test_core.py"
}
Result of run_command 127 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "",
  "details": {
    "stdout": "",
    "stderr": "",
    "exit_code": 1
  }
}
Generated tokens 48 tokens · stopped: STOP
Let's check `test_core.py`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "TestFluxPoints" gammapy/estimators/tests/test_core.py<|"|>}<tool_call|><|tool_response>
Turn 9at 185 s88 tokens out9,598 prompt tokens
Wait, maybe the class is just `FluxPoints` and the test doesn't use `TestFluxPoints` in the name? Let's just look for `FluxPoints` in `test_core.py`.
TOOL CALL · run_command
{
  "command": "grep -rn \"FluxPoints\" gammapy/estimators/tests/test_core.py | head -n 20"
}
Result of run_command 60 characters
{
  "status": "ok",
  "stdout": "",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 88 tokens · stopped: STOP
Wait, maybe the class is just `FluxPoints` and the test doesn't use `TestFluxPoints` in the name? Let's just look for `FluxPoints` in `test_core.py`. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "FluxPoints" gammapy/estimators/tests/test_core.py | head -n 20<|"|>}<tool_call|><|tool_response>
Turn 10at 194 s153 tokens out9,723 prompt tokens
That's strange. Maybe it's in `gammapy/estimators/tests/test_utils.py` or somewhere else.
Wait, `FluxPoints` is in `gammapy/estimators/points/core.py`. Let me check if there is a `gammapy/estimators/points/tests` directory. The layout showed:
`./gammapy/estimators/points`
`./gammapy/estimators/tests`

Wait, `gammapy/estimators/points` doesn't seem to have a `tests` directory. Let's check.
TOOL CALL · run_command
{
  "command": "ls -R gammapy/estimators/points/"
}
Result of run_command 303 characters
{
  "status": "ok",
  "stdout": "gammapy/estimators/points/:\n__init__.py\ncore.py\nlightcurve.py\nprofile.py\nsed.py\nsensitivity.py\ntests\n\ngammapy/estimators/points/tests:\n__init__.py\ntest_core.py\ntest_lightcurve.py\ntest_profile.py\ntest_sed.py\ntest_sensitivity.py\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 153 tokens · stopped: STOP
That's strange. Maybe it's in `gammapy/estimators/tests/test_utils.py` or somewhere else. Wait, `FluxPoints` is in `gammapy/estimators/points/core.py`. Let me check if there is a `gammapy/estimators/points/tests` directory. The layout showed: `./gammapy/estimators/points` `./gammapy/estimators/tests` Wait, `gammapy/estimators/points` doesn't seem to have a `tests` directory. Let's check. <channel|><|tool_call>call:run_command{command:<|"|>ls -R gammapy/estimators/points/<|"|>}<tool_call|><|tool_response>
Turn 11at 199 s74 tokens out10,014 prompt tokens
Ah, it's in `gammapy/estimators/points/tests/test_core.py`. Let's check that.
TOOL CALL · run_command
{
  "command": "grep -rn \"FluxPoints\" gammapy/estimators/points/tests/test_core.py | head -n 20"
}
Result of run_command 1,166 characters
{
  "status": "ok",
  "stdout": "11:from gammapy.estimators import FluxPoints\n81:    actual = FluxPoints._energy_ref_lafferty(model, energy_min, energy_max)\n95:    table[\"e_ref\"] = FluxPoints._energy_ref_lafferty(\n98:    dnde = FluxPoints.from_table(table, reference_model=model)\n135:        energy_ref = FluxPoints._energy_ref_lafferty(model, energy_min, energy_max)\n139:    result = FluxPoints.from_table(table, reference_model=model)\n167:    return FluxPoints.read(path)\n173:    return FluxPoints.read(path)\n177:class TestFluxPoints:\n207:        actual = FluxPoints.read(tmp_path / \"tmp.fits\")\n221:        actual = FluxPoints.read(filename)\n261:    fp = FluxPoints.read(path)\n298:    fp = FluxPoints.from_table(table_single_bin, sed_type=\"dnde\")\n337:    fp = FluxPoints.from_table(table, sed_type=\"dnde\")\n363:    fp_read = FluxPoints.from_table(table_read)\n382:    flux_points = FluxPoints.from_table(table)\n394:    fp = FluxPoints.from_table(table)\n409:    table[\"e_ref\"] = FluxPoints._energy_ref_lafferty(\n412:    fp = FluxPoints.from_table(table, reference_model=model)\n420:    lc_1d = FluxPoints.read(\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 74 tokens · stopped: STOP
Ah, it's in `gammapy/estimators/points/tests/test_core.py`. Let's check that. <channel|><|tool_call>call:run_command{command:<|"|>grep -rn "FluxPoints" gammapy/estimators/points/tests/test_core.py | head -n 20<|"|>}<tool_call|><|tool_response>
Turn 12at 266 s1,102 tokens out10,535 prompt tokens
Okay, `TestFluxPoints` is at line 177.

Now I'll try to write a reproduction script. I'll use `FluxPoints.from_table` if I can create a table, or just mock the `FluxPoints` object since I know exactly where it fails.
Mocking might be easier. I need a `FluxPoints` object where `has_stat_profiles` is True, `stat_scan` is a `Map`, and `geom` is such that `to_image()` followed by possibly `to_cube()` gives `data_shape = (1, 1)`.

Actually, the failure is in `squash_fluxpoints`. Let's just call `squash_fluxpoints` with mocked arguments.

```python
import numpy as np
from gammapy.estimators.points.core import squash_fluxpoints
from unittest.mock import MagicMock
from gammapy.maps import Map, MapAxis, Maps

# Mock flux_point
flux_point = MagicMock()
# Mock stat_scan
stat_scan_geom = MagicMock()
stat_scan_geom.axes = {"norm": MagicMock()}
stat_scan_geom.axes["norm"].center = np.linspace(0.1, 10, 100)
stat_scan = MagicMock()
stat_scan.geom = stat_scan_geom
stat_scan.data = np.random.rand(100, 1) # Assuming axes["norm"] is the first axis
flux_point.stat_scan = stat_scan

# Mock geom
flux_point.geom = MagicMock()
# Mock to_image return value
image_geom = MagicMock()
image_geom.data_shape = (1, 1)
flux_point.geom.to_image.return_value = image_geom
# For to_cube, we need it to return something with data_shape (1, 1)
# In squash_fluxpoints:
# geom = flux_point.geom.to_image()
# if axis.name != "energy":
#     geom = geom.to_cube([flux_point.geom.axes["energy"]])

# So let's make axis.name == "energy" so it stays as image_geom
axis = MagicMock()
axis.name = "energy"

# This should trigger the ValueError in Map.from_geom(geom, data=minimizer.x)
try:
    squash_fluxpoints(flux_point, axis)
except ValueError as e:
    print(f"Caught expected error: {e}")
```

Wait, `stat_scan` is used as `np.sum(flux_point.stat_scan.data, axis=0).ravel()`.
If `flux_point.stat_scan.data` is `(100, 1)`, then `np.sum` is `(1,)`, and `ravel()` is `(1,)`.
Then `interp1d` and `minimize` will be called.
The `minimizer.x` will be something like `array([some_value])`, shape `(1,)`.

Let's refine the reproduction script.
TOOL CALL · run_command
{
  "command": "python3 - <<'PY'\nimport numpy as np\nfrom gammapy.estimators.points.core import squash_fluxpoints\nfrom unittest.mock import MagicMock\nfrom gammapy.maps import Map, MapAxis, Maps\nfrom scipy.interpolate import interp1d\n\n# Mock flux_point\nflux_point = MagicMock()\n# Mock stat_scan\nstat_scan_geom = MagicMock()\nstat_scan_geom.axes = {\"norm\": MagicMock()}\nstat_scan_geom.axes[\"norm\"].center = np.linspace(0.1, 10, 100)\nstat_scan = MagicMock()\nstat_scan.geom = stat_scan_geom\nstat_scan.data = np.random.rand(100, 1) \nflux_point.stat_scan = stat_scan\n\n# Mock geom\nflux_point.geom = MagicMock()\nimage_geom = MagicMock()\nimage_geom.data_shape = (1, 1)\nflux_point.geom.to_image.return_value = image_geom\nflux_point.geom.axes = {\"energy\": MagicMock()}\n\n# axis\naxis = MagicMock()\naxis.name = \"energy\"\n\n# lafferty_profile is used inside squash_fluxpoints via interpolate_profile\n# Let's check what interpolate_profile does.\n# It's probably imported from gammapy.estimators.points.core or similar.\n# Actually it's not imported in core.py in the read_file output? \n# Wait, I saw: f = interpolate_profile(value_scan, stat_scan)\n# Where is interpolate_profile defined?\nPY\n"
}
Result of run_command 2,215 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "Traceback (most recent call last):\n  File \"<stdin>\", line 2, in <module>\n  File \"/workspace/gammapy/estimators/__init__.py\", line 4, in <module>\n    from .core import Estimator\n  File \"/workspace/gammapy/estimators/core.py\", line 9, in <module>\n    from gammapy.modeling.models import ModelBase\n  File \"/workspace/gammapy/modeling/__init__.py\", line 8, in <module>\n    from .selection import select_nested_models\n  File \"/workspace/gammapy/modeling/selection.py\", line 4, in <module>\n    from gammapy.stats.utils import sigma_to_ts\n  File \"/workspace/gammapy/stats/__init__.py\", line 4, in <module>\n    from .counts_statistic import CashCountsStatistic, WStatCountsStatistic\n  File \"/workspace/gammapy/stats/counts_statistic.py\", line 8, in <module>\n    from .fit_statistics import cash, wstat\n  File \"/workspace/gammapy/stats/fit_statistics.py\", line 8, in <module>\n    from gammapy.stats.fit_statistics_cython import TRUNCATION_VALUE\nModuleNotFoundError: No module named 'gammapy.stats.fit_statistics_cython'\n",
  "details": {
    "stdout": "",
    "stderr": "Traceback (most recent call last):\n  File \"<stdin>\", line 2, in <module>\n  File \"/workspace/gammapy/estimators/__init__.py\", line 4, in <module>\n    from .core import Estimator\n  File \"/workspace/gammapy/estimators/core.py\", line 9, in <module>\n    from gammapy.modeling.models import ModelBase\n  File \"/workspace/gammapy/modeling/__init__.py\", line 8, in <module>\n    from .selection import select_nested_models\n  File \"/workspace/gammapy/modeling/selection.py\", line 4, in <module>\n    from gammapy.stats.utils import sigma_to_ts\n  File \"/workspace/gammapy/stats/__init__.py\", line 4, in <module>\n    from .counts_statistic import CashCountsStatistic, WStatCountsStatistic\n  File \"/workspace/gammapy/stats/counts_statistic.py\", line 8, in <module>\n    from .fit_statistics import cash, wstat\n  File \"/workspace/gammapy/stats/fit_statistics.py\", line 8, in <module>\n    from gammapy.stats.fit_statistics_cython import TRUNCATION_VALUE\nModuleNotFoundError: No module named 'gammapy.stats.fit_statistics_cython'\n",
    "exit_code": 1
  }
}
Generated tokens 1,102 tokens · stopped: STOP
Okay, `TestFluxPoints` is at line 177. Now I'll try to write a reproduction script. I'll use `FluxPoints.from_table` if I can create a table, or just mock the `FluxPoints` object since I know exactly where it fails. Mocking might be easier. I need a `FluxPoints` object where `has_stat_profiles` is True, `stat_scan` is a `Map`, and `geom` is such that `to_image()` followed by possibly `to_cube()` gives `data_shape = (1, 1)`. Actually, the failure is in `squash_fluxpoints`. Let's just call `squash_fluxpoints` with mocked arguments. ```python import numpy as np from gammapy.estimators.points.core import squash_fluxpoints from unittest.mock import MagicMock from gammapy.maps import Map, MapAxis, Maps # Mock flux_point flux_point = MagicMock() # Mock stat_scan stat_scan_geom = MagicMock() stat_scan_geom.axes = {"norm": MagicMock()} stat_scan_geom.axes["norm"].center = np.linspace(0.1, 10, 100) stat_scan = MagicMock() stat_scan.geom = stat_scan_geom stat_scan.data = np.random.rand(100, 1) # Assuming axes["norm"] is the first axis flux_point.stat_scan = stat_scan # Mock geom flux_point.geom = MagicMock() # Mock to_image return value image_geom = MagicMock() image_geom.data_shape = (1, 1) flux_point.geom.to_image.return_value = image_geom # For to_cube, we need it to return something with data_shape (1, 1) # In squash_fluxpoints: # geom = flux_point.geom.to_image() # if axis.name != "energy": # geom = geom.to_cube([flux_point.geom.axes["energy"]]) # So let's make axis.name == "energy" so it stays as image_geom axis = MagicMock() axis.name = "energy" # This should trigger the ValueError in Map.from_geom(geom, data=minimizer.x) try: squash_fluxpoints(flux_point, axis) except ValueError as e: print(f"Caught expected error: {e}") ``` Wait, `stat_scan` is used as `np.sum(flux_point.stat_scan.data, axis=0).ravel()`. If `flux_point.stat_scan.data` is `(100, 1)`, then `np.sum` is `(1,)`, and `ravel()` is `(1,)`. Then `interp1d` and `minimize` will be called. The `minimizer.x` will be something like `array([some_value])`, shape `(1,)`. Let's refine the reproduction script. <channel|><|tool_call>call:run_command{command:<|"|>python3 - <<'PY' import numpy as np from gammapy.estimators.points.core import squash_fluxpoints from unittest.mock import MagicMock from gammapy.maps import Map, MapAxis, Maps from scipy.interpolate import interp1d # Mock flux_point flux_point = MagicMock() # Mock stat_scan stat_scan_geom = MagicMock() stat_scan_geom.axes = {"norm": MagicMock()} stat_scan_geom.axes["norm"].center = np.linspace(0.1, 10, 100) stat_scan = MagicMock() stat_scan.geom = stat_scan_geom stat_scan.data = np.random.rand(100, 1) flux_point.stat_scan = stat_scan # Mock geom flux_point.geom = MagicMock() image_geom = MagicMock() image_geom.data_shape = (1, 1) flux_point.geom.to_image.return_value = image_geom flux_point.geom.axes = {"energy": MagicMock()} # axis axis = MagicMock() axis.name = "energy" # lafferty_profile is used inside squash_fluxpoints via interpolate_profile # Let's check what interpolate_profile does. # It's probably imported from gammapy.estimators.points.core or similar. # Actually it's not imported in core.py in the read_file output? # Wait, I saw: f = interpolate_profile(value_scan, stat_scan) # Where is interpolate_profile defined? PY <|"|>}<tool_call|><|tool_response>
Turn 13at 283 s174 tokens out12,352 prompt tokens
Ah, it seems like some cython extensions are not built or not available in the current environment.
`ModuleNotFoundError: No module named 'gammapy.stats.fit_statistics_cython'`

Wait, if I'm in the repository and it's pre-installed, maybe I should be running pytest or something that uses the installed version.
However, I'm running `python3 - <<'PY'`.

Maybe if I add `/workspace/gammapy` to `PYTHONPATH` it won't help if the cython extension is actually missing.
Let me check if `gammapy/stats/fit_statistics_cython` exists in the filesystem.
TOOL CALL · run_command
{
  "command": "find /workspace -name \"fit_statistics_cython*\""
}
Result of run_command 112 characters
{
  "status": "ok",
  "stdout": "/workspace/gammapy/stats/fit_statistics_cython.pyx\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 174 tokens · stopped: STOP
Ah, it seems like some cython extensions are not built or not available in the current environment. `ModuleNotFoundError: No module named 'gammapy.stats.fit_statistics_cython'` Wait, if I'm in the repository and it's pre-installed, maybe I should be running pytest or something that uses the installed version. However, I'm running `python3 - <<'PY'`. Maybe if I add `/workspace/gammapy` to `PYTHONPATH` it won't help if the cython extension is actually missing. Let me check if `gammapy/stats/fit_statistics_cython` exists in the filesystem. <channel|><|tool_call>call:run_command{command:<|"|>find /workspace -name "fit_statistics_cython*"<|"|>}<tool_call|><|tool_response>
Turn 14at 291 s89 tokens out12,582 prompt tokens
It's a `.pyx` file, so it needs to be compiled. The environment should have it pre-installed.
Wait, if it's pre-installed, it should be in the site-packages.

Let's see if `pytest` works. If `pytest` works, then the environment is correctly set up.
TOOL CALL · run_command
{
  "command": "pytest --version"
}
Result of run_command 74 characters
{
  "status": "ok",
  "stdout": "pytest 9.0.2\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 89 tokens · stopped: STOP
It's a `.pyx` file, so it needs to be compiled. The environment should have it pre-installed. Wait, if it's pre-installed, it should be in the site-packages. Let's see if `pytest` works. If `pytest` works, then the environment is correctly set up. <channel|><|tool_call>call:run_command{command:<|"|>pytest --version<|"|>}<tool_call|><|tool_response>
Turn 15at 294 s49 tokens out12,718 prompt tokens
And try running a simple test.
TOOL CALL · run_command
{
  "command": "pytest gammapy/estimators/points/tests/test_core.py -q --tb=short --no-header"
}
Result of run_command 3,637 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "In /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nImportError while loading conftest '/workspace/gammapy/conftest.py'.\n/gammapy/gammapy/conftest.py:12: in <module>\n    from gammapy.data import GTI\n/gammapy/gammapy/data/__init__.py:4: in <module>\n    from .data_store import DataStore\n/gammapy/gammapy/data/data_store.py:17: in <module>\n    from .observations import Observation, ObservationChecker, Observations\n/gammapy/gammapy/data/observations.py:20: in <module>\n    from gammapy.utils.metadata import CreatorMetaData, TargetMetaData, TimeInfoMetaData\n/gammapy/gammapy/utils/metadata.py:16: in <module>\n    from gammapy.version import version\nE   ModuleNotFoundError: No module named 'gammapy.version'\n",
  "details": {
    "stdout": "",
    "stderr": "In /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'parseString' deprecated - use 'parse_string'\nIn /usr/local/lib/python3.10/site-packages/matplotlib/mpl-data/stylelib/classic.mplstyle: 'resetCache' deprecated - use 'reset_cache'\nImportError while loading conftest '/workspace/gammapy/conftest.py'.\n/gammapy/gammapy/conftest.py:12: in <module>\n    from gammapy.data import GTI\n/gammapy/gammapy/data/__init__.py:4: in <module>\n    from .data_store import DataStore\n/gammapy/gammapy/data/data_store.py:17: in <module>\n    from .observations import Observation, ObservationChecker, Observations\n/gammapy/gammapy/data/observations.py:20: in <module>\n    from gammapy.utils.metadata import CreatorMetaData, TargetMetaData, TimeInfoMetaData\n/gammapy/gammapy/utils/metadata.py:16: in <module>\n    from gammapy.version import version\nE   ModuleNotFoundError: No module named 'gammapy.version'\n",
    "exit_code": 4
  }
}
Generated tokens 49 tokens · stopped: STOP
And try running a simple test. <channel|><|tool_call>call:run_command{command:<|"|>pytest gammapy/estimators/points/tests/test_core.py -q --tb=short --no-header<|"|>}<tool_call|><|tool_response>
Turn 16at 306 s136 tokens out13,980 prompt tokens
This is a mess. `ModuleNotFoundError: No module named 'gammapy.version'`.
It seems the code in `/workspace/gammapy` is conflicting with the installed `gammapy` package, or it's not installed correctly.

Wait, if I am in `/workspace` and the package is `gammapy/gammapy`, maybe I should be running it as a module.

Let me try to see where `gammapy` is installed.
TOOL CALL · run_command
{
  "command": "python3 -c \"import gammapy; print(gammapy.__file__)\""
}
Result of run_command 92 characters
{
  "status": "ok",
  "stdout": "/workspace/gammapy/__init__.py\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 136 tokens · stopped: STOP
This is a mess. `ModuleNotFoundError: No module named 'gammapy.version'`. It seems the code in `/workspace/gammapy` is conflicting with the installed `gammapy` package, or it's not installed correctly. Wait, if I am in `/workspace` and the package is `gammapy/gammapy`, maybe I should be running it as a module. Let me try to see where `gammapy` is installed. <channel|><|tool_call>call:run_command{command:<|"|>python3 -c "import gammapy; print(gammapy.__file__)"<|"|>}<tool_call|><|tool_response>
Turn 17at 316 s142 tokens out14,165 prompt tokens
So when I import `gammapy`, it's importing from `/workspace/gammapy`. But `gammapy` is at `/workspace/gammapy/gammapy` probably? No, the layout says:
`./gammapy`
`./gammapy/__init__.py`
`./gammapy/estimators`
etc.
So `/workspace/gammapy` IS the package.

However, there is no `gammapy/version.py` in the layout.
Wait, let me check.
TOOL CALL · run_command
{
  "command": "find /workspace -name \"version.py\""
}
Result of run_command 60 characters
{
  "status": "ok",
  "stdout": "",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 142 tokens · stopped: STOP
So when I import `gammapy`, it's importing from `/workspace/gammapy`. But `gammapy` is at `/workspace/gammapy/gammapy` probably? No, the layout says: `./gammapy` `./gammapy/__init__.py` `./gammapy/estimators` etc. So `/workspace/gammapy` IS the package. However, there is no `gammapy/version.py` in the layout. Wait, let me check.<channel|><|tool_call>call:run_command{command:<|"|>find /workspace -name "version.py"<|"|>}<tool_call|><|tool_response>
Turn 18at 336 s243 tokens out14,345 prompt tokens
No `version.py`. That's why `from gammapy.version import version` fails.
Usually `version.py` is generated during build.

If I can't run the code because of missing files (like `version.py` and cython extensions), I might have to rely on static analysis and my understanding of the error.

But wait, the instructions say: "All relevant and missing system packages are ALREADY pre-installed".
This means there should be an installed version of `gammapy`.

If I want to use the installed version and NOT the one in `/workspace`, I can try moving out of `/workspace` or removing `/workspace` from `sys.path`.

But I'm supposed to fix the code in `/workspace`.

Let's see if I can find where `version` is supposed to be.
Actually, let's look at `gammapy/utils/metadata.py` mentioned in the traceback.
TOOL CALL · read_file
{
  "end_line": 20,
  "filepath": "gammapy/utils/metadata.py",
  "start_line": 10
}
Result of read_file 461 characters
{
  "status": "ok",
  "filepath": "gammapy/utils/metadata.py",
  "content": "from gammapy.utils.fits import skycoord_from_dict\nfrom gammapy.utils.time import (\n    time_ref_from_dict,\n    time_ref_to_dict,\n    time_relative_to_ref,\n)\nfrom gammapy.version import version\nfrom .types import AltAzSkyCoordType, ICRSSkyCoordType, SkyCoordType, TimeType\n\n__all__ = [\n    \"MetaData\",",
  "start_line": 10,
  "end_line": 20,
  "total_lines": 306,
  "is_truncated": false
}
Generated tokens 243 tokens · stopped: STOP
No `version.py`. That's why `from gammapy.version import version` fails. Usually `version.py` is generated during build. If I can't run the code because of missing files (like `version.py` and cython extensions), I might have to rely on static analysis and my understanding of the error. But wait, the instructions say: "All relevant and missing system packages are ALREADY pre-installed". This means there should be an installed version of `gammapy`. If I want to use the installed version and NOT the one in `/workspace`, I can try moving out of `/workspace` or removing `/workspace` from `sys.path`. But I'm supposed to fix the code in `/workspace`. Let's see if I can find where `version` is supposed to be. Actually, let's look at `gammapy/utils/metadata.py` mentioned in the traceback. <channel|><|tool_call>call:read_file{end_line:20,filepath:<|"|>gammapy/utils/metadata.py<|"|>,start_line:10}<tool_call|><|tool_response>
Turn 19at 407 s178 tokens out3,160 prompt tokens
It's precisely `from gammapy.version import version`.

If `gammapy/version.py` does not exist in `/workspace`, then anyone trying to run `import gammapy` from `/workspace` will fail if `gammapy.version` is required.

Wait, maybe I can just create a dummy `version.py`?

But first, let me check if I can just run the reproduction script by skipping the `gammapy` import if possible, or by fixing the environment.

Actually, the `ModuleNotFoundError` for `fit_statistics_cython` is more critical. Cython extensions are usually `.so` files.

Let's check if they exist.
TOOL CALL · run_command
{
  "command": "find /workspace -name \"*fit_statistics_cython*\""
}
Result of run_command 112 characters
{
  "status": "ok",
  "stdout": "/workspace/gammapy/stats/fit_statistics_cython.pyx\n",
  "stderr": "",
  "exit_code": 0
}
Generated tokens 178 tokens · stopped: STOP
It's precisely `from gammapy.version import version`. If `gammapy/version.py` does not exist in `/workspace`, then anyone trying to run `import gammapy` from `/workspace` will fail if `gammapy.version` is required. Wait, maybe I can just create a dummy `version.py`? But first, let me check if I can just run the reproduction script by skipping the `gammapy` import if possible, or by fixing the environment. Actually, the `ModuleNotFoundError` for `fit_statistics_cython` is more critical. Cython extensions are usually `.so` files. Let's check if they exist. <channel|><|tool_call>call:run_command{command:<|"|>find /workspace -name "*fit_statistics_cython*"<|"|>}<tool_call|><|tool_response>
Turn 20at 417 s119 tokens out3,394 prompt tokens
It's a `.pyx` file. It's not compiled!

This means the environment in `/workspace` is the source code, but not the installed package.
BUT, there might be an installed package in the site-packages.

If I run `PYTHONPATH="" python3 ...`, it might work if it's installed in site-packages.

Let's try:
TOOL CALL · run_command
{
  "command": "PYTHONPATH=\"\" python3 -c \"import gammapy; print(gammapy.__version__)\""
}
Result of run_command 197 characters
{
  "status": "ok",
  "stdout": "2.0.dev236+g073422255\n",
  "stderr": "",
  "exit_code": 0,
  "budget_warning": "Only 10 tool call(s) remaining (20/30 used). Finalize your edits and call submit_patch soon."
}
Generated tokens 119 tokens · stopped: STOP
It's a `.pyx` file. It's not compiled! This means the environment in `/workspace` is the source code, but not the installed package. BUT, there might be an installed package in the site-packages. If I run `PYTHONPATH="" python3 ...`, it might work if it's installed in site-packages. Let's try: <channel|><|tool_call>call:run_command{command:<|"|>PYTHONPATH="" python3 -c "import gammapy; print(gammapy.__version__)"<|"|>}<tool_call|><|tool_response>
Turn 21at 426 s141 tokens out3,608 prompt tokens
Great! So if I set `PYTHONPATH=""`, I use the pre-installed version.
But I want to test the FIX I make in `/workspace`.

To do that, I need the code in `/workspace` to be importable.
If I can't compile the cython extensions, I might have a problem if the reproduction script uses them.

Does the `squash_fluxpoints` function use `fit_statistics_cython`?

Let's check `gammapy/estimators/points/core.py`.
TOOL CALL · read_file
{
  "filepath": "gammapy/estimators/points/core.py"
}
Result of read_file 6,010 characters
{
  "status": "ok",
  "filepath": "gammapy/estimators/points/core.py",
  "content": "# Licensed under a 3-clause BSD style license - see LICENSE.rst\nimport logging\nfrom copy import deepcopy\nimport numpy as np\nfrom scipy import stats\nfrom scipy.interpolate import interp1d\nfrom scipy.optimize import minimize\nfrom astropy.io import fits\nfrom astropy.io.registry import IORegistryError\nfrom astropy.table import Table, vstack\nfrom astropy.time import Time\nfrom astropy.visualization import quantity_support\nimport matplotlib.pyplot as plt\nfrom gammapy.data import GTI\nfrom gammapy.maps import Map, MapAxis, Maps, RegionNDMap, TimeMapAxis\nfrom gammapy.maps.axes import UNIT_STRING_FORMAT, flat_if_equal\nfrom gammapy.modeling.models import TemplateSpectralModel\nfrom gammapy.modeling.models.spectral import scale_plot_flux\nfrom gammapy.modeling.scipy import stat_profile_ul_scipy\nfrom gammapy.utils.interpolation import interpolate_profile\nfrom gammapy.utils.scripts import make_path\nfrom gammapy.utils.table import table_standardise_units_copy\nfrom gammapy.utils.time import time_ref_to_dict\nfrom ..map.core import DEFAULT_UNIT, FluxMaps\n\n__all__ = [\"FluxPoints\"]\n\nlog = logging.getLogger(__name__)\n\n\ndef squash_fluxpoints(flux_point, axis):\n    \"\"\"Squash a `~FluxPoints` object into one point.\n\n    The log-likelihoods profiles in each bin are summed\n    to compute the resultant quantities. Stat profiles\n    must be present on the `~FluxPoints` object for\n    this method to work.\n    \"\"\"\n    value_scan = flux_point.stat_scan.geom.axes[\"norm\"].center\n    stat_scan = np.sum(flux_point.stat_scan.data, axis=0).ravel()\n    f = interp1d(value_scan, stat_scan, kind=\"quadratic\", bounds_error=False)\n    f = interpolate_profile(value_scan, stat_scan)\n    minimizer = minimize(\n        f,\n        x0=value_scan[int(len(value_scan) / 2)],\n        bounds=[(value_scan[0], value_scan[-1])],\n        method=\"L-BFGS-B\",\n    )\n\n    maps = Maps()\n    geom = flux_point.geom.to_image()\n    if axis.name != \"energy\":\n        geom = geom.to_cube([flux_point.geom.axes[\"energy\"]])\n\n    maps[\"norm\"] = Map.from_geom(geom, data=minimizer.x)\n    maps[\"norm_err\"] = Map.from_geom(\n        geom, data=np.sqrt(minimizer.hess_inv.todense()).reshape(geom.data_shape)\n    )\n    maps[\"n_dof\"] = Map.from_geom(geom, data=flux_point.geom.axes[axis.name].nbin)\n\n    if \"norm_ul\" in flux_point.available_quantities:\n        delta_ts = flux_point.meta.get(\"n_sigma_ul\", 2) ** 2\n        ul = stat_profile_ul_scipy(value_scan, stat_scan, delta_ts=delta_ts)\n        maps[\"norm_ul\"] = Map.from_geom(geom, data=ul.value)\n\n    maps[\"stat\"] = Map.from_geom(geom, data=f(minimizer.x))\n\n    geom_scan = geom.to_cube([MapAxis.from_nodes(value_scan, name=\"norm\")])\n    maps[\"stat_scan\"] = Map.from_geom(\n        geom=geom_scan, data=stat_scan.reshape(geom_scan.data_shape)\n    )\n    try:\n        maps[\"stat_null\"] = Map.from_geom(geom, data=np.sum(flux_point.stat_null.data))\n        maps[\"ts\"] = maps[\"stat_null\"] - maps[\"stat\"]\n    except AttributeError:\n        log.info(\n            \"Stat null info not present on original FluxPoints object. TS not computed\"\n        )\n\n    maps[\"success\"] = Map.from_geom(geom=geom, data=minimizer.success, dtype=bool)\n\n    combined_fp = FluxPoints.from_maps(\n        maps=maps,\n        sed_type=flux_point.sed_type_init,\n        reference_model=flux_point.reference_model,\n        gti=flux_point.gti,\n        meta=flux_point.meta,\n    )\n    return combined_fp\n\n\nclass FluxPoints(FluxMaps):\n    \"\"\"Flux points container.\n\n    The supported formats are described here: :ref:`gadf:flux-points`.\n\n    In summary, the following formats and minimum required columns are:\n\n    * Format ``dnde``: columns ``e_ref`` and ``dnde``\n    * Format ``e2dnde``: columns ``e_ref``, ``e2dnde``\n    * Format ``flux``: columns ``e_min``, ``e_max``, ``flux``\n    * Format ``eflux``: columns ``e_min``, ``e_max``, ``eflux``\n\n    Parameters\n    ----------\n    table : `~astropy.table.Table`\n        Table with flux point data.\n\n    Attributes\n    ----------\n    table : `~astropy.table.Table`\n        Table with flux point data.\n\n    Examples\n    --------\n    The `FluxPoints` object is most easily created by reading a file with\n    flux points given in one of the formats documented above::\n\n    >>> from gammapy.estimators import FluxPoints\n    >>> filename = '$GAMMAPY_DATA/hawc_crab/HAWC19_flux_points.fits'\n    >>> flux_points = FluxPoints.read(filename)\n    >>> flux_points.plot() #doctest: +SKIP\n\n    An instance of `FluxPoints` can also be created by passing an instance of\n    `astropy.table.Table`, which contains the required columns, such as `'e_ref'`\n    and `'dnde'`. The corresponding `sed_type` has to be defined in the meta data\n    of the table::\n\n    >>> import numpy as np\n    >>> from astropy import units as u\n    >>> from astropy.table import Table\n    >>> from gammapy.estimators import FluxPoints\n    >>> from gammapy.modeling.models import PowerLawSpectralModel\n    >>> table = Table()\n    >>> pwl = PowerLawSpectralModel()\n    >>> e_ref = np.geomspace(1, 100, 7) * u.TeV\n    >>> table[\"e_ref\"] = e_ref\n    >>> table[\"dnde\"] = pwl(e_ref)\n    >>> table[\"dnde_err\"] = pwl.evaluate_error(e_ref)[0]\n    >>> table.meta[\"SED_TYPE\"] = \"dnde\"\n    >>> flux_points = FluxPoints.from_table(table)\n    >>> flux_points.plot(sed_type=\"flux\") #doctest: +SKIP\n\n    If you have flux points in a different data format, the format can be changed\n    by renaming the table columns and adding meta data::\n\n\n    >>> from astropy import units as u\n    >>> from astropy.table import Table\n    >>> from gammapy.estimators import FluxPoints",
  "start_line": 1,
  "end_line": 150,
  "total_lines": 872,
  "is_truncated": true,
  "budget_warning": "Only 9 tool call(s) remaining (21/30 used). Finalize your edits and call submit_patch soon."
}
Generated tokens 141 tokens · stopped: STOP
Great! So if I set `PYTHONPATH=""`, I use the pre-installed version. But I want to test the FIX I make in `/workspace`. To do that, I need the code in `/workspace` to be importable. If I can't compile the cython extensions, I might have a problem if the reproduction script uses them. Does the `squash_fluxpoints` function use `fit_statistics_cython`? Let's check `gammapy/estimators/points/core.py`. <channel|><|tool_call>call:read_file{filepath:<|"|>gammapy/estimators/points/core.py<|"|>}<tool_call|><|tool_response>
Turn 22at 462 s515 tokens out5,716 prompt tokens
I see the problematic line:

Line 53: `maps["norm"] = Map.from_geom(geom, data=minimizer.x)`

And the one that was apparently already "fixed" or noted as correctly handled (or maybe not):

Line 54-56:
```python
    maps["norm_err"] = Map.from_geom(
        geom, data=np.sqrt(minimizer.hess_inv.todense()).reshape(geom.data_shape)
    )
```

The issue is that `minimizer.x` is a 1D array (usually size 1 in this case) and `Map.from_geom(geom, data=...)` expects the data to match `geom.data_shape`. If `geom` is an image with 1x1 pixel, `geom.data_shape` is `(1, 1)`. `minimizer.x` is `(1,)`. This causes a `ValueError`.

Wait, `minimizer.x` is a numpy array.

Let's look at how to fix it.
We should probably do `minimizer.x.reshape(geom.data_shape)`.

But let's check if `minimizer.x` could have more than one element.
Based on `x0=value_scan[int(len(value_scan) / 2)]`, `x0` is a scalar. So `minimizer.x` will be a 1D array with 1 element.

Let's verify this with a minimal reproduction.
Since I can't easily run the full `gammapy` from source without the compiled extensions, I'll try to create a reproduction script that mocks the necessary parts or uses the installed `gammapy` and mocks `FluxPoints` and `Map.from_geom` to see where it fails.

Wait, if I just want to reproduce the `ValueError`, I can just use `gammapy.maps.Map.from_geom`.

Let's try:
TOOL CALL · run_command
{
  "command": "PYTHONPATH=\"\" python3 - <<'PY'\nimport numpy as np\nfrom gammapy.maps import GeomImage, Map\ngeom = GeomImage.from_geom(GeomImage.from_geom(None)) # This is not how it works\nPY\n"
}
Result of run_command 600 characters
{
  "status": "error",
  "error_type": "CommandError",
  "error_message": "Traceback (most recent call last):\n  File \"<stdin>\", line 2, in <module>\nImportError: cannot import name 'GeomImage' from 'gammapy.maps' (/workspace/gammapy/maps/__init__.py)\n",
  "details": {
    "stdout": "",
    "stderr": "Traceback (most recent call last):\n  File \"<stdin>\", line 2, in <module>\nImportError: cannot import name 'GeomImage' from 'gammapy.maps' (/workspace/gammapy/maps/__init__.py)\n",
    "exit_code": 1
  },
  "budget_warning": "Only 8 tool call(s) remaining (22/30 used). Finalize your edits and call submit_patch soon."
}
Generated tokens 515 tokens · stopped: STOP
I see the problematic line: Line 53: `maps["norm"] = Map.from_geom(geom, data=minimizer.x)` And the one that was apparently already "fixed" or noted as correctly handled (or maybe not): Line 54-56: ```python maps["norm_err"] = Map.from_geom( geom, data=np.sqrt(minimizer.hess_inv.todense()).reshape(geom.data_shape) ) ``` The issue is that `minimizer.x` is a 1D array (usually size 1 in this case) and `Map.from_geom(geom, data=...)` expects the data to match `geom.data_shape`. If `geom` is an image with 1x1 pixel, `geom.data_shape` is `(1, 1)`. `minimizer.x` is `(1,)`. This causes a `ValueError`. Wait, `minimizer.x` is a numpy array. Let's look at how to fix it. We should probably do `minimizer.x.reshape(geom.data_shape)`. But let's check if `minimizer.x` could have more than one element. Based on `x0=value_scan[int(len(value_scan) / 2)]`, `x0` is a scalar. So `minimizer.x` will be a 1D array with 1 element. Let's verify this with a minimal reproduction. Since I can't easily run the full `gammapy` from source without the compiled extensions, I'll try to create a reproduction script that mocks the necessary parts or uses the installed `gammapy` and mocks `FluxPoints` and `Map.from_geom` to see where it fails. Wait, if I just want to reproduce the `ValueError`, I can just use `gammapy.maps.Map.from_geom`. Let's try: <channel|><|tool_call>call:run_command{command:<|"|>PYTHONPATH="" python3 - <<'PY' import numpy as np from gammapy.maps import GeomImage, Map geom = GeomImage.from_geom(GeomImage.from_geom(None)) # This is not how it works PY <|"|>}<tool_call|><|tool_response>

Patch, tests and logs

Final code change Included
Test output Missing
Not saved for this rollout. Nothing has been inferred or reconstructed.
Test errors Missing
Not saved for this rollout. Nothing has been inferred or reconstructed.
Test report (JUnit) Missing
Not saved for this rollout. Nothing has been inferred or reconstructed.
Agent log Included
  [   0.0s] 📋 System Prompt: You are a principal Python software engineer resolving a repository issue in `/workspace`.
  [   0.0s] 🎯 Task Prompt: You are evaluating a software engineering task for repository gammapy/gammapy.
  [  23.1s] 💭 (593 chars) "The user is reporting a `ValueError` in `FluxPoints.resample_axis` in Gammapy 1.3.
The error happens at:
`gammapy/estima..."
  [  23.1s] 🔧 run_command grep -rn --include="*.py" "squash_fluxpoints" gammapy/estimators/points/core.py
  [  23.2s]   → 31:def squash_fluxpoints(flux_point, axis):
  [  32.3s] 💭 (196 chars) "Okay, `squash_fluxpoints` is defined at line 31 and called at line 869 in 
`gammapy/estimators/points/core.py`.

Let's re..."
  [  32.3s] 📖 read_file (gammapy/estimators/points/core.py)
  [  32.3s]   ✓ {'status': 'ok', 'filepath': 'gammapy/estimators/points/core.py', 'content': '\ndef 
squash_fluxpoints(flux_point, axis):…
  [  50.5s] 💭 (668 chars) "The `minimizer.x` is the result of `scipy.optimize.minimize`. For a scalar objective 
function, `minimizer.x` is a numpy ..."
  [  50.5s] 📖 read_file (gammapy/estimators/points/core.py)
  [  50.5s]   ✓ {'status': 'ok', 'filepath': 'gammapy/estimators/points/core.py', 'content': '    def 
resample_axis(self, axis_new):\n  …
  [  89.9s] 💭 (1499 chars) "In `resample_axis`, it iterates over the bins of `axis_new`.
For each bin, it slices the `FluxPoints` object: `fp = self..."
  [  89.9s] 📖 read_file (gammapy/maps/core.py)
  [  90.0s]   ✓ {'status': 'ok', 'filepath': 'gammapy/maps/core.py', 'content': '        from .hpx import HpxGeom\n     
from .region …
  [  93.1s] 💭 (76 chars) "And `RegionNDMap` (which is likely used here since it was in the traceback):"
  [  93.1s] 📖 read_file (gammapy/maps/region/ndmap.py)
  [  93.1s]   ✓ {'status': 'ok', 'filepath': 'gammapy/maps/region/ndmap.py', 'content': '            Data array.\n      
"""\n        i…
  [ 135.5s] 💭 (2124 chars) "In `RegionNDMap.data` (the setter):
```python
        if np.isscalar(value):
            value = value * np.ones(self.ge..."
  [ 135.5s] 🔧 run_command grep -rn --include="*.py" "TestFluxPoints" gammapy/estimators/tests/
  [ 135.5s]   → error (exit 0): 
  [ 140.6s] 💭 (229 chars) "Ah, maybe they are in `gammapy/estimators/points/tests`? No, `gammapy/estimators/tests` is a
directory but maybe the fil..."
  [ 140.6s] 🔧 run_command ls gammapy/estimators/tests/
  [ 140.6s]   → __init__.py
  [ 143.0s] 💭 (27 chars) "Let's check `test_core.py`."
  [ 143.0s] 🔧 run_command grep -rn "TestFluxPoints" gammapy/estimators/tests/test_core.py
  [ 143.0s]   → error (exit 0): 
  [ 148.7s] 💭 (149 chars) "Wait, maybe the class is just `FluxPoints` and the test doesn't use `TestFluxPoints` in the 
name? Let's just look for `F..."
  [ 148.7s] 🔧 run_command grep -rn "FluxPoints" gammapy/estimators/tests/test_core.py | head -n 20
  [ 148.7s]   🔧 
  [ 157.2s] 💭 (391 chars) "That's strange. Maybe it's in `gammapy/estimators/tests/test_utils.py` or somewhere else.
Wait, `FluxPoints` is in `gamm..."
  [ 157.2s] 🔧 run_command ls -R gammapy/estimators/points/
  [ 157.2s]   → gammapy/estimators/points/:
  [ 162.2s] 💭 (77 chars) "Ah, it's in `gammapy/estimators/points/tests/test_core.py`. Let's check that."
  [ 162.2s] 🔧 run_command grep -rn "FluxPoints" gammapy/estimators/points/tests/test_core.py | head -n 20
  [ 162.3s]   → 11:from gammapy.estimators import FluxPoints
  [ 230.0s] 💭 (2113 chars) "Okay, `TestFluxPoints` is at line 177.

Now I'll try to write a reproduction script. I'll use `FluxPoints.from_table` if..."
  [ 230.0s] 🔧 run_command (36 lines) python3 - <<'PY'
  [ 233.2s]   → error (exit 0): 
  [ 246.6s] 💭 (544 chars) "Ah, it seems like some cython extensions are not built or not available in the current 
environment.
`ModuleNotFoundError..."
  [ 246.6s] 🔧 run_command find /workspace -name "fit_statistics_cython*"
  [ 246.6s]   → /workspace/gammapy/stats/fit_statistics_cython.pyx
  [ 254.5s] 💭 (248 chars) "It's a `.pyx` file, so it needs to be compiled. The environment should have it 
pre-installed.
Wait, if it's pre-installe..."
  [ 254.5s] 🔧 run_command pytest --version
  [ 254.6s]   → pytest 9.0.2
  [ 257.2s] 💭 (30 chars) "And try running a simple test."
  [ 257.2s] 🔧 run_command pytest gammapy/estimators/points/tests/test_core.py -q --tb=short --no-header
  [ 258.5s]   → error (exit 0): 
  [ 269.1s] 💭 (361 chars) "This is a mess. `ModuleNotFoundError: No module named 'gammapy.version'`.
It seems the code in `/workspace/gammapy` is c..."
  [ 269.1s] 🔧 run_command python3 -c "import gammapy; print(gammapy.__file__)"
  [ 269.2s]   → /workspace/gammapy/__init__.py
  [ 279.6s] 💭 (331 chars) "So when I import `gammapy`, it's importing from `/workspace/gammapy`. But `gammapy` is at 
`/workspace/gammapy/gammapy` p..."
  [ 279.6s] 🔧 run_command find /workspace -name "version.py"
  [ 279.7s]   🔧 
  [ 299.4s] 💭 (796 chars) "No `version.py`. That's why `from gammapy.version import version` fails.
Usually `version.py` is generated during build...."
  [ 299.4s] 📖 read_file (gammapy/utils/metadata.py)
  [ 299.4s]   ✓ {'status': 'ok', 'filepath': 'gammapy/utils/metadata.py', 'content': 'from gammapy.utils.fits import 
skycoord_from_dict\…
  [ 370.6s] 💭 (565 chars) "It's precisely `from gammapy.version import version`.

If `gammapy/version.py` does not exist in `/workspace`, then anyo..."
  [ 370.6s] 🔧 run_command find /workspace -name "*fit_statistics_cython*"
  [ 370.7s]   → /workspace/gammapy/stats/fit_statistics_cython.pyx
  [ 380.3s] 💭 (297 chars) "It's a `.pyx` file. It's not compiled!

This means the environment in `/workspace` is the source code, but not the insta..."
  [ 380.3s] 🔧 run_command PYTHONPATH="" python3 -c "import gammapy; print(gammapy.__version__)"
  [ 380.4s]   → 2.0.dev236+g073422255
  [ 389.3s] 💭 (403 chars) "Great! So if I set `PYTHONPATH=""`, I use the pre-installed version.
But I want to test the FIX I make in `/workspace`.
..."
  [ 389.3s] 📖 read_file (gammapy/estimators/points/core.py)
  [ 389.3s]   ✓ {'status': 'ok', 'filepath': 'gammapy/estimators/points/core.py', 'content': '# Licensed under a 
3-clause BSD style lice…
  [ 425.4s] 💭 (1358 chars) "I see the problematic line:

Line 53: `maps["norm"] = Map.from_geom(geom, data=minimizer.x)`

And the one that was appar..."
  [ 425.4s] 🔧 run_command (5 lines) PYTHONPATH="" python3 - <<'PY'
  [ 426.6s]   → error (exit 0): 
Native result row
{
  "agent_error": "Agent exceeded session timeout (7.5 min)",
  "duration_seconds": 488.89,
  "error": "Empty agent patch",
  "grade": {
    "error": "Empty agent patch",
    "resolved": false,
    "strict_clean_patch": false,
    "test_exit_code": -1
  },
  "instance_id": "gammapy__gammapy-5674",
  "pass_idx": 0,
  "patch_chars": 0,
  "phase1_seconds": 488.89,
  "repo": "gammapy/gammapy",
  "request_log_path": "/kaggle-root/working/r31/rollouts_X/requests/gammapy__gammapy-5674__p0__r7.jsonl",
  "resolved": false,
  "rollout_idx": 7,
  "run_key": "gammapy__gammapy-5674__p0__r7",
  "strict_clean_patch": false,
  "tool_calls": 22,
  "total_llm_calls": 22,
  "trace_path": "/kaggle-root/working/r31/rollouts_X/traces/trace_gammapy__gammapy-5674__p0__r7.json"
}